Professional Documents
Culture Documents
2 Project Type Production castings tons/year : 7650t, 4500 ton forging press
3 Country KSA
7 Currency SAR
3) Deployment Schedule
- Organization Chart
- +82-31-5179-3071
- chonghyun.lee@doosan.com
- +82-31-5179-1944
- sangjo. park@doosan.com
Mr. iL Bog Wee
+82-31-5179-1986
ilbog.wee@doosan.com
1. Price Summary
Project Casing and Forging PJT Date :
Package Civil and Building Works Price Unit : SAR
Amount
S/N Description Total Remarks
Civil Building Plumbing
Included Above in
3 OVERHEAD & PROFIT Included Above in Direct Cost
Direct Cost
2 EARTH WORKS 0 - - - - 0 0 0 0 0
2 Excavation 0 - - - - 0 0 0 0 0
2.1.1 Excavation by manual M3 100 41.66 17.36 10.42 69.44 4,166 1,736 1,042 6,944 0
2.1.2 Excavation (soil/weathered rock) Depth 0~4m, loading at excavated area, transportation M3 148,717 24.58 10.24 6.15 40.97 3,655,464 1,522,862 914,610 6,092,935 as per soil report only
to temporary stockpile and unloading is included. But,if sandy strata upto 4
there is an unsuitable material, it is disposed of in a meters
designated and approved area and graded.
2.1.3 Excavation (soil/weathered rock, deep) Depth 0~4m, loading at excavated area, transportation M3 43,098 29.16 12.15 7.29 48.60 1,256,738 523,641 314,184 2,094,563 Weathered and weak
to temporary stockpile and unloading is included. But,if rocks as per soil report,
there is an unsuitable material, it is disposed of in a so hard rock and blasting
designated and approved area and graded. is not considered.
2.2.4 Backfilling and compaction Dry density 95%(ASTM D1557), loading at temporary M3 21,305 34.32 19.09 11.46 64.87 731,188 406,712 244,155 1,382,055 0
(by imported soil) stockpile area, transportation to backfilling area and
unloading is included. Max grained size : 50mm
Add Backfilling and compaction M3 942 59.99 25.00 15.00 99.99 56,511 23,550 14,130 94,191 0
≤15% sand maximum 25% passing the 3/8 in sieve and
(by SC1 for GRP pipe backfilling work)
maximum 5% passing No. 200 sieve
2 Disposal 0 - - - - 0 0 0 0 0
2.3.1 Disposal of surplus and/or unsuitable soil Loading at excavated area or temporary stockpile, M3 40,758 18.60 7.75 4.65 31.00 758,099 315,875 189,525 1,263,498 0
and rock transportation to disposal area and unloading (outside
site boundary)
New Disposal of surplus soil and rock Including dumping and levelling work in a designated M3 90,000 7.50 3.12 1.87 12.49 675,000 280,800 168,300 1,124,100 within boundary area
dumping area inside site boundary
2 Temporary Works 0 - - - - 0 0 0 0 0
2.4.3 Dewatering Item : Concrete structure M3 648 118.26 49.28 29.57 197.11 76,632 31,933 19,161 127,727 0
(The volume /quantity represents the volume Structure area B x L = (8.5m x 30.5m) (excluding
or quantity of foundation excavation below the working space) x 1 position
underground water table, not actual quantity of
water which is to be dewatered during the The dewatering quantity is calculated excluding
construction) working space.
Suitable working space should be regarded by
subcontractor and dewatering quantity will be
measured excluding working space
2.4.4 Dewatering Item : Concrete structure M3 1,333 118.26 49.28 29.57 197.11 157,641 65,690 39,417 262,748 0
(The volume /quantity represents the volume Structure area B x L = (7.8m x 25.2m + 3.8m x 10.9m)
or quantity of foundation excavation below the (excluding working space) x 2 positions
underground water table, not actual quantity of
water which is to be dewatered during the The dewatering quantity is calculated excluding
construction) working space.
Suitable working space should be regarded by
subcontractor and dewatering quantity will be
measured excluding working space
2.4.5 Dewatering Item : Concrete structure M3 594 118.26 49.28 29.57 197.11 70,246 29,272 17,565 117,083 0
(The volume /quantity represents the volume Structure area B x L = 19m x 12.5 m (excluding
or quantity of foundation excavation below the working space)
underground water table, not actual quantity of
water which is to be dewatered during the The dewatering quantity is calculated excluding
construction) working space.
Suitable working space should be regarded by
subcontractor and dewatering quantity will be
measured excluding working space
2.4.6 Dewatering Item : Concrete structure M3 117 118.26 49.28 29.57 197.11 13,836 5,766 3,460 23,062 0
(The volume /quantity represents the volume Structure area B x L = 9.2m x 4.5 m + 10.2m x 3.4m
or quantity of foundation excavation below the (excluding working space)
underground water table, not actual quantity of
water which is to be dewatered during the The dewatering quantity is calculated excluding
construction) working space.
Suitable working space should be regarded by
subcontractor and dewatering quantity will be
measured excluding working space
2.4.8 Dewatering Item : Concrete duct and pit M3 132 118.26 49.28 29.57 197.11 15,610 6,505 3,903 26,019 0
(The volume /quantity represents the volume Structure area B x L = 2.0 m x 55 m (excluding
or quantity of foundation excavation below the working space) * 2 positions
underground water table, not actual quantity of
water which is to be dewatered during the The dewatering quantity is calculated excluding
construction) working space.
Suitable working space should be regarded by
subcontractor and dewatering quantity will be
measured excluding working space
3 Other Works 0 - - - - 0 0 0 0 0
2.5.1 Sand bedding and filling Dry density 95%(ASTM D1557) M3 4,856 47.49 19.79 11.87 79.15 230,611 96,100 57,641 384,352 0
2.5.2 Clean sand for tank foundation Dry density 90%(ASTM D1557) M3 10 47.49 19.79 11.87 79.15 475 198 119 792 0
2.5.3 Sand bituminous mix for tank foundation Refer to BS code 2654 A.3.5 M3 8 124.98 52.08 31.25 208.31 1,000 417 250 1,666 0
2.5.4 Asphalt board for tank foundation T=12.5mm M2 47 166.64 69.44 41.66 277.74 7,832 3,264 1,958 13,054 0
2.5.5 Crushed stone or gravel filling with compaction M3 2,041 111.30 6.91 11.58 129.79 227,163 14,103 23,635 264,901 0
2.5.6 Geotextile(Nonwoven) for underground T= 2.5 mm(ASTM D5119), 9 5.83 2.43 1.46 9.72 52 22 13 87 0
Min. Weight=450 g/m2 (ASTM D5216) M2
2.5.8 Cable warning tape, W=150mm M 7,380 4.58 1.39 - 5.97 33,800 10,258 0 44,059 0
2.5.9 Termite control system Applied area : beneath the structure contacted with M2 0 - - - - 0 0 0 0 0
soil.
All works including material, procedures, etc. should
be satisfied with local regulations and standards
4.1.2 Concrete for structure contact with fc=35 MPa (cylinder strength), type I, ASTM C150 M3 1,159 - 62.99 8.05 71.04 0 73,005 9,330 82,335 0
seawater and ground water including Mineral admixture (7% of silica fume or fly
ash)
- Max. W/C ratio is 0.4
- Min. Cement contenst is 370 kg/m3
4.1.3 Concrete for ground slab & underground fc=35 MPa (cylinder strength), type I, ASTM C150 M3 12,754 - 62.99 8.05 71.04 0 803,374 102,670 906,044 0
structure including Mineral admixture (7% of silica fume or fly
ash)
- Max. W/C ratio is 0.4
- Min. Cement contenst is 370 kg/m3
4.1.4 Concrete for above ground structure fc=35 MPa (cylinder strength), type I, ASTM C150 M3 0 - - - - 0 0 0 0 0
- Max. W/C ratio is 0.4
- Min. Cement contenst is 370 kg/m3
4.1.5 Concrete for small structure for roof small fc=35 MPa (cylinder strength), type I, ASTM C150 M3 2,993 - 62.99 15.11 78.10 0 188,529 45,224 233,753 0
pad, man hole, ditch, catch pit etc.) including Mineral admixture (7% of silica fume or fly
ash)
- Max. W/C ratio is 0.4
- Min. Cement contenst is 370 kg/m3
4.1.6 Leveling cement mortar for floor, trench, fc=15 MPa, Type I, ASTM C150 M3 0 - - - - 0 0 0 0 0
culvert etc.
4 Reinforcing Bar Works including Bar Bending Drawings( Re-bar material supply by Owner) 0 - - - - 0 0 0 0 0
4.2.1 Uncoated deformed bar (D ≤ 25mm) ASTM A615 grade 60 , or equivalent TON 1,360 - 1,090.35 156.77 1,247.11 0 1,482,869 213,200 1,696,070 0
4.2.2 Uncoated Deformed bar (D > 25mm) ASTM A615 grade 60 , or equivalent TON 176 - 1,090.35 156.77 1,247.11 0 191,901 27,591 219,491 0
Add Epoxy coated deformed bar (D ≤ 25mm) ASTM A615 grade 60 , or equivalent( including re-bar TON 412 - 1,221.52 207.85 1,429.37 0 503,266 85,634 588,900 0
touch up paint with epoxy)
Add Epoxy coated Deformed bar (D > 25mm) ASTM A615 grade 60 , or equivalent( including re-bar TON 17 - 1,221.52 207.85 1,429.37 0 20,766 3,533 24,299 0
touch up paint with epoxy)
4.2.3 Rebar cathodic protection TON 0 - - - - 0 0 0 0 0
4.2.4 Weldded wire mesh #8 - 150 x 150 wiremesh, fy=500MPa M2 0 - - - - 0 0 0 0 0
4 Form Works 0 - - - - 0 0 0 0 0
4.3.1 Formwork, comply with ACI 347R Flat type for foundation & underground structures M2 52,447 64.82 62.40 19.24 146.46 3,399,615 3,272,693 1,009,080 7,681,388 0
Including scaffolding
4.3.2 Flat type for above ground structures M2 0 - - - - 0 0 0 0 0
4.3.3 Round type for above ground structures M2 386 99.54 101.72 28.14 229.40 38,422 39,264 10,862 88,548 0
4.3.4 Slip form for silo EA 0 - - - - 0 0 0 0 0
4.3.5 Block out for anchor bolt H > 300mm only M2 646 64.82 62.40 19.24 146.46 41,874 40,310 12,429 94,613 0
For equipment base plate and anchor
Excluding cleaning and chipping work(mechanical
scope)
4.3.6 Staging for concrete structure H≤6M, staging system shall be determined by subcontractor. M3 510 27.77 6.94 - 34.71 14,163 3,539 0 17,702 0
But, MS approval is required by the owner.
4.3.7 H > 6M, staging system shall be determined by M3 32 55.55 6.94 - 62.49 1,778 222 0 2,000 0
subcontractor. But, MS approval is required by the
owner.
4 Other Works 0 - - - - 0 0 0 0 0
4.4.1 Waterstop PVC M 6,131 34.72 6.94 - 41.66 212,868 42,549 0 255,417 0
Tensile strength: >145 kg/cm2
W= 250mm, T= 5mm, central expansion bulb
4.4.2 Expansion joint Dowel bar & PVC cap M 8,787 92.95 86.58 0.75 180.28 816,752 760,778 6,590 1,584,120 0
Deformed bar D25, L= 600mm @600
Flashing cap, stainless steel T=1.2mm
4.4.3 Isolation joint PVC or rubber, 25mm M 338 34.94 11.03 - 45.97 11,810 3,728 0 15,538 0
4.4.4 PVC or rubber, 50mm M 955 69.89 22.06 - 91.95 66,745 21,067 0 87,812 0
4.4.5 Contraction joint Saw cutting w/ backup rod and sealant for roof slab, M 0 - - - - 0 0 0 0 0
2000 x 2000
4.4.6 Saw cutting w/ backup rod and sealant for above M 17,720 28.82 14.71 3.09 46.62 510,690 260,661 54,755 826,106 0
ground slab
4.4.7 Non-shrinkage grout for structural steel Cement-based, nonmetallic, non-shrink grout with M3 0.000 - - - - 0 0 0 0 0
column. Including form work following 7 days strength requirements (ASTM
C1107) :
compressive strength = Min. 70 MPa
4.4.8 Non-shrinkage grout for equipment Cement-based, nonmetallic, non-shrink grout with M3 13 7,937.82 2,406.44 1,126.50 11,470.76 103,192 31,284 14,645 149,120 Only Material Supply as
foundation. Including form work. following 7 days strength requirements (ASTM per BOQ description for
C1107) : item
compressive strength = Min. 70 MPa
Material supply only
4.4.10 Ladder rung Hot dip galvanizing according to ASTM A153, EA 36 138.87 27.77 - 166.64 4,999 1,000 0 5,999 0
W=400mm
Add GRP rung (for Step / ASTM A153, Color Painted GRP(FRP). according to ASTM A153, 1,786 138.87 27.77 - 166.64 248,022 49,597 0 297,619 0
W=400mm) W=400mm
- To be manufactured by the pultrusion process with a
glass content minimum of 45%, maximum of 55% by
weight.
- All pultruded structural shapes shall be further
protected from ultraviolet (UV) attack with: integral UV
inhibitors in the resin and a synthetic surfacing veil to
produce a resin rich surface. EA
- Shall have a tested flame spread rating of 25 or less
per ASTM E-84 Tunnel Test.
-Including stainless steel bolts and/or GRP fixing
clamp, GRP embedded angle with anchor and other
accessories for grating.
4.4.11 Steel sleeve embedded in concrete ASTM A36, or equivalent, w/ rust resisting paint TON 0 - - - - 0 0 0 0 0
4.4.14 Embedded steel (angle, channel, plate, etc Hot dip galvanizing according to ASTM A153 kg 69,982 8.33 3.47 2.08 13.88 582,950 242,838 145,563 971,350 0
embedded in concrete) including stud or
rebar for fixing
4.4.15 Re-opening, repair & finish work for concrete floor & wall, including sealing & steel M2 0 - - - - 0 0 0 0 0
flashing works.
Add Lifting Eye Embedded Socket (φ16mm) - Hot 2,908 48.60 20.83 - 69.43 141,329 60,574 0 201,902 0
Dip Galvanized EA
Add Lifting Sling Wire (φ16mm) - Hot Dip 40 694.35 27.77 - 722.12 27,774 1,111 0 28,885 0
Galvanized EA
Add AIR VENT PIPE (φ250,GRP) L=1.2m, Swan neck type 4 1,388.70 347.18 - 1,735.88 5,555 1,389 0 6,944 0
incl. Chicken mesh(Grid 5mm), Bent tube, ea.
embedded fixing
5.1.9 T= 200 mm, including concrete material & wire mesh M2 26,589 - 28.92 76.12 105.04 0 768,954 2,023,955 2,792,909 0
Concrete : fc= 35MPa, Type I (ASTM C 150),
Wiremesh : #8 - 150 x 150, fy=500MPa
5 Other Works 0 - - - - 0 0 0 0 0
5.2.1 Interlocking block paving T = 80mm with sand bedding M2 6,905 43.45 52.02 0.58 96.05 300,022 359,198 4,005 663,225 0
5.2.2 Kerb stone W= 200mm, L= 1500mm, H= 300mm with sand M 10,972 41.63 12.75 15.29 69.67 456,764 139,893 167,762 764,419 0
bedding, cement mortar.
5.2.3 Concrete footpath T = 100mm w/ sub base M2 0 - - - - 0 0 0 0 0
5.2.4 Gravel paving T = 75mm (40mm nominal size) M2 46,531 7.08 2.95 1.77 11.80 329,439 137,266 82,360 549,066 0
5.2.5 Road sign EA 30 1,416.48 590.20 354.12 2,360.80 42,494 17,706 10,624 70,824 0
5.2.6 Road marking White and yellow M 15,055 12.50 5.21 3.12 20.83 188,188 78,437 46,972 313,596 0
6 Other Works 0 - - - - 0 0 0 0 0
6.3.3 Steel grating (serrated type) 25T @30mm bar(weight 34 kg/m2) M2 5 290.86 121.19 72.72 484.77 1,454 606 364 2,424 0
6.3.4 including hot dip galvanizing according to 32T @30mm bar(weight 41 kg/m2) M2 12 344.05 143.36 86.01 573.42 4,129 1,720 1,032 6,881 0
6.3.5 ASTM A123, self tapping screw bolt type 45T @30mm bar(weight 53 kg/m2) M2 293 427.10 177.96 106.78 711.84 125,140 52,142 31,287 208,569 0
according to specification
6.3.6 Chequered plate 4.5T(weight 40.0 kg/m2) M2 12 432.48 180.20 108.12 720.80 5,190 2,162 1,297 8,650 0
6.3.7 including hot dip galvanizing according to 6.0T(weight 49.4 kg/m2) M2 1 518.81 216.17 129.70 864.68 519 216 130 865 0
6.3.8 ASTM A123 8.0T(weight 71.0 kg/m2) M2 1 735.21 306.34 183.80 1,225.35 735 306 184 1,225 0
6.3.9 Steel pipe handrail Top rail (32A, H=1,100 mm), one mid rail (25A), post M 10 265.05 110.44 66.26 441.75 2,651 1,104 663 4,418 0
including hot dip galvanizing according to (25A @ 1500mm), toe-plate H=100mm
ASTM A123 (weight 18.4 kg/m)
6.3.10 Stainless pipe handrail Top rail (32A, H=1,100 mm), one mid rail (25A), post M 72 1,833.09 763.79 458.27 3,055.15 131,982 54,993 32,995 219,971 0
(25A @ 1500mm), toe-plate H=100mm
(weight 19.3 kg/m)
6.3.11 Steel ladder without safety cage Rung width= 450mm M 0 - - - - 0 0 0 0 0
including hot dip galvanizing according to Vertical fixed ladders as per international standards
ASTM A123 & Painting (weight 16.0 kg/m)
6.3.12 Steel ladder with safety cage Rung width= 450mm M 4 583.11 242.96 145.78 971.85 2,332 972 583 3,887 0
including hot dip galvanizing according to Vertical fixed ladders as per international standards,
ASTM A123 & Painting safety hoops (H>2000 mm) with safety chain.
(weight 42.0 kg/m)
6.3.13 Manhole cover with frame (heavy duty D= 610mm EA 9 1,944.18 347.18 - 2,291.36 17,498 3,125 0 20,622 0
cast iron) Detailed specification to manufactural standard
approved by local regulation
Add Manhole cover with frame (Medium duty D= 610mm EA 277 972.09 347.18 - 1,319.27 269,269 96,169 0 365,438 0
cast iron) Detailed specification to manufactural standard
approved by local regulation
Add Manhole cover with frame (heavy duty D= 760mm EA 10 2,673.25 347.18 - 3,020.43 26,733 3,472 0 30,204 0
cast iron) Detailed specification to manufactural standard
approved by local regulation
Add Manhole cover with frame (Medium duty D=760mm EA 0 - - - - 0 0 0 0 0
cast iron) Detailed specification to manufactural standard
approved by local regulation
6.3.14 GRP(FRP) grating T = 32mm, with frame M2 16 2,166.38 930.43 541.59 3,638.40 34,662 14,887 8,665 58,214 0
Detailed specification to manufactural standard
approved by local regulation
6.3.17 GRP(FRP) ladder without safety cage Rung width= 450mm M 6 611.03 208.31 - 819.34 3,666 1,250 0 4,916 0
Detailed specification to manufactural standard
approved by local regulation
6.3.18 GRP(FRP) ladder with safety cage Rung width= 450mm M 39 1,041.53 208.31 - 1,249.84 40,620 8,124 0 48,744 0
Detailed specification to manufactural standard
approved by local regulation
7 PIPE WORKS 0 - - - - 0 0 0 0 0
7 PVC Pipe 0 - - - - 0 0 0 0 0
7.1.4 UPVC pipes D200 mm, Pressure= 2.0 barg 922 98.18 69.44 - 167.62 90,522 64,024 0 154,546 0
M
7.1.9 CPVC pipes D200 mm, Pressure= 2.0 barg 6,491 270.80 104.15 - 374.95 1,757,763 676,038 0 2,433,800 0
M
7 Reinfrced Plastic Mortar Pipe 0 - - - - 0 0 0 0 0
7.3.1 RPM pipe D300 mm, Pressure= 2.0 barg 439 157.92 39.99 50.32 248.23 69,327 17,556 22,090 108,973 0
M
7.3.2 RPM pipe D400 mm, Pressure= 2.0 barg 471 217.31 42.21 53.12 312.64 102,353 19,881 25,020 147,253 0
M
7.3.3 RPM pipe D500 mm, Pressure= 2.0 barg 551 265.05 57.41 64.60 387.06 146,043 31,633 35,595 213,270 0
M
7.3.4 RPM pipe D600 mm, Pressure= 2.0 barg 424 326.64 63.03 70.92 460.59 138,495 26,725 30,070 195,290 0
M
7.3.5 RPM pipe D700 mm, Pressure= 2.0 barg 295 393.49 69.44 76.38 539.31 116,080 20,485 22,532 159,096 0
M
7.3.6 RPM pipe D800 mm, Pressure= 2.0 barg 42 471.83 83.32 83.32 638.47 19,817 3,499 3,499 26,816 0
M
7.3.7 RPM pipe D900 mm, Pressure= 2.0 barg 267 563.56 90.27 90.27 744.10 150,471 24,102 24,102 198,675 0
M
7.3.8 RPM pipe D1000 mm, Pressure= 2.0 barg 241 659.19 97.21 94.43 850.83 158,865 23,428 22,758 205,050 0
M
7.3.9 RPM pipe D1100 mm, Pressure= 2.0 barg 312 765.78 104.15 97.21 967.14 238,923 32,495 30,330 301,748 0
M
7.3.10 RPM pipe D1200 mm, Pressure= 2.0 barg 18 878.90 120.48 99.29 1,098.67 15,820 2,169 1,787 19,776 0
M
8 Other Pipe 0 - - - - 0 0 0 0 0
7.6.4 Valve installation - installation only, valve will be supplied by Mech. Part 3 - 2,083.05 - 2,083.05 0 6,249 0 6,249 0
BUTTERFLY / DN 200 / Manual Valve / 150 EA
pound / Wafer
7.6.4.3 Valve installation - installation only, valve will be supplied by Mech. Part 23 - 2,083.05 - 2,083.05 0 47,910 0 47,910 0
Ball / DN 50 / Manual Valve / 150 pound / EA
Flanged
8 MASONRY & PLASTER WORKS including curing works 0 - - - - 0 0 0 0 0
11 FINISH WORKS including curing works 0 - - - - 0 0 0 0 0
11 Waterproofing & damp proofing 0 - - - - 0 0 0 0 0
11.1.1 Under ground : T= 4mm bituminous membrane M2 2,147 34.16 14.23 8.54 56.93 73,342 30,552 18,335 122,229 0
Waterproof membrane
11.1.2 Under ground : T= 4mm bituminous membrane w/ T= 15 mm, M2 4,698 48.33 20.14 12.08 80.55 227,054 94,618 56,752 378,424 0
Waterproof membrane w/ protection board protection board
11.1.3 Under ground : T= 250μm, on concrete surface in contact with soil M2 46,104 11.08 22.61 2.23 35.92 510,832 1,042,411 102,812 1,656,056 0
Bituminous painting
11.1.9 PE film for ground 2 layers of min. 0.06 P.E film M2 56,012 5.00 2.08 1.25 8.33 280,060 116,505 70,015 466,580 0
11 Painting & Coating Works 0 - - - - 0 0 0 0 0
11.3.1 Floor, Epoxy paint DFT 400 μm M2 4,119 32.50 29.41 - 61.91 133,868 121,140 0 255,007 0
11.3.2 Floor, Epoxy seal coat with epoxy screed DFT 3.0 mm M2 0 - - - - 0 0 0 0 0
topping
11.3.3 Floor, Heavy duty hardener DFT 3.0 mm M2 0 - - - - 0 0 0 0 0
11.3.4 Floor, Oil resistant paint DFT 400 μm M2 612 32.50 29.41 - 61.91 19,890 17,999 0 37,889 0
11.3.5 Floor, Chemical resistant paint DFT 400 μm M2 337 39.40 24.51 - 63.91 13,278 8,260 0 21,538 0
11.3.6 Floor, Acid/Alkali resistant paint DFT 3.0 mm M2 0 - - - - 0 0 0 0 0
11.3.7 Floor, Dust proof coating Under access elevator internal area, etc . 2coat silane- M2 0 - - - - 0 0 0 0 0
siloxane, DFT 250 μm
11.3.8 Wall, Emulsion paint DFT 90 μm M2 0 - - - - 0 0 0 0 0
11.3.9 Wall, Epoxy paint DFT 400 μm M2 11,137 32.50 29.41 6.94 68.85 361,953 327,539 77,291 766,782 0
11.3.10 Wall, Oil resistant paint DFT 400 μm M2 1,631 32.50 29.41 6.94 68.85 53,008 47,968 11,319 112,294 0
11.3.11 Wall, Chemical resistant paint DFT 400 μm M2 1,171 39.40 24.51 6.94 70.85 46,137 28,701 8,127 82,965 0
11.3.12 Wall, Acid/alkali resistant paint DFT 400 μm M2 0 - - - - 0 0 0 0 0
11.3.13 Ceiling, Emulsion paint DFT 80 μm M2 0 - - - - 0 0 0 0 0
11.3.14 Ceiling, Epoxy paint DFT 400 μm M2 1,146 32.50 29.41 6.94 68.85 37,245 33,704 7,953 78,902 0
11.3.15 Ceiling, Oil resistant paint DFT 400 μm M2 422 32.50 29.41 6.94 68.85 13,715 12,411 2,929 29,055 0
11.3.16 Ceiling, Chemical resistant paint DFT 400 μm M2 315 39.40 24.51 6.94 70.85 12,411 7,721 2,186 22,318 0
12 FENCE WORKS 0 - - - - 0 0 0 0 0
12 Fence and Gate Works 0 - - - - 0 0 0 0 0
12.1.1 HCIS Class 3 Fence for plant boundary As per HCIS Regulation M 3,257 - - - - 0 0 0 0 Excluded
12.1.2 Steel palisade fence (for TR) • Removable un-climbable bird proof galvanized and PVC 185 - - - - 0 0 0 0 Excluded
coated steel palisade fence.
• Height 3m, 5 mm minimum wire diameter with aperture 25
mm squares fitted with a lockable personnel access gate
complete with the supporting steel structure.
• Hot dip galvanized and painted steel post shall be applied.
• Door hinge, lock set, base plate, anchor and all other M
accessories shall be included.
12.1.3 Double leaf hinged gate HCIS Category 3 Fence & Gate EA 4 - - - - 0 0 0 0 Excluded
W= 4m, H= 3m
12.1.4 Single leaf hinged pedestrian gate HCIS Category 3 Fence & Gate EA 6 - - - - 0 0 0 0 Excluded
W= 1m, H= 3m
12.1.5 Electric operation sliding type gate W= 10m, H= 3m EA 4 - - - - 0 0 0 0 Excluded
12.1.6 Turnstile gate HCIS Category 3 Fence & Gate EA 1 62,372.14 25,405.38 15,622.90 103,400.42 62,372 25,405 15,623 103,400 0
Entrance and exit turnstile gates
13 Landscaping 0 - - - - 0 0 0 0 0
13 Grass 0 - - - - 0 0 0 0 0
13.1.1 Grass including as following m2 3,620 81.77 34.02 20.41 136.20 296,007 123,152 73,884 493,044 0
- Earth work
- Irrigation system(including pump, valve etc.)
- Control panel and electrical cable, etc.
- As per Royal commission regulation
13 Tree 0 - - - - 0 0 0 0 0
13.2.1 Evergreen tree height = Min. 9m EA 50 2,832.95 1,180.40 708.35 4,721.70 141,648 59,020 35,418 236,085 0
13.2.2 height = Min. 3m EA 100 1,541.46 642.27 385.36 2,569.09 154,146 64,227 38,536 256,909 0
13.2.3 Date palm tree height = Min. 3m EA 50 2,166.38 902.66 541.59 3,610.63 108,319 45,133 27,080 180,532 0
13.2.4 Shrubs height = Min. 0.4m' m 75 111.65 46.52 27.91 186.08 8,374 3,489 2,093 13,956 0
* Note
1. The sub-contractor of civil, structural and architectural works shall observe the Specification, Local regulation, and related International code for the material supply, erection and test.
2. Wall and roof cladding shall be designed and installed to comply with the manufacturers requirements to obtain a 30 years guarantee on the completed roofing and walling.
3. Surface preparations, paint systems, and galvanizing shall be selected to give a minimum practical life to first maintenance repainting in 10 years
4. All buildings, their structure, foundations and fabric, together with all other civil engineering works shall be designed and constructed for a design life of 40 years.
5. All materails shall meet the local regulation (Royal commission)
6. In the Civil BOQ, "Melting shop equipment foundation" is for EAF (Electric Arc Furnace), LF (Ladle Furnace), VD (Vacuum degasser)/VOD (Vacuum Oxygen Decarburization), AOD (Argon Oxygen Decarburization), IF (Introduction Furnace) foundation only
7. In the Civil BOQ, "Forging plant equipment foundation" is for Press, Manipulator and Ring rolling mill foundation only
8. In the Civil BOQ, "Casting plant equipment foundation" is for Shake out Machine foundation only
BILL OF QUANTITY FOR Building Work
PJT Name : Oasis Casting & Forging Plant
Production castings tons/year : 7650t, 4500 ton forging press UNIT:SAR
Item Material Description Unit Quantity
No. Unit Price(SAR) Amount Price(SAR)
Remark
2 EARTH WORKS - 0 0 0 0
2 Excavation - 0 0 0 0
2.1.1 Excavation by manual M3 15,426 41.66 17.36 10.42 69.44 642,647 267,795 160,739 1,071,181 Disposal of unsuitable materila shall
be paid under item # 2.3.1
2.1.2 Excavation (soil/weathered rock) Depth 0~4m, loading at excavated area, transportation to M3 174,966 24.58 10.24 6.15 40.97 4,300,664 1,791,652 1,076,041 7,168,357 Disposal of unsuitable materila shall
temporary stockpile and unloading is included. But,if there is be paid under item # 2.3.1
an unsuitable material, it is disposed of in a designated and as per soil report only sandy strata
approved area and graded. upto 4 meters
2.1.3 Excavation (soil/weathered rock, deep) Depth over 4m, loading at excavated area, transportation to M3 45,472 29.16 12.15 7.29 48.60 1,325,964 552,485 331,491 2,209,939 Disposal of unsuitable materila shall
temporary stockpile and unloading is included. But,if there is be paid under item # 2.3.1
an unsuitable material, it is disposed of in a designated and Weathered and weak rocks as per soil
approved area and graded. report, so hard rock and blasting is not
considered.
2.4.3 Dewatering Required Structure Volume (below water level) M3 5,921 118.26 49.28 29.57 197.11 700,217 291,787 175,084 1,167,088 0
(The volume /quantity represents the
volume or quantity of foundation The dewatering quantity is calculated excluding working space.
excavation below the underground water Suitable working space should be regarded by subcontractor
table, not actual quantity of water which and dewatering quantity will be measured excluding working
is to be dewatered during the space
construction)
Ground water level= FGL(-) 4.5 m
Depth of excavation: Refer to Building Size
3 Other Works 0 - - - - 0 0 0 0 0
2.5.5 Crushed stone or gravel filling with compaction M3 0 - - - - 0 0 0 0 0
2.5.9 Termite control system Applied area : beneath the structure contacted with soil. M2 0 - - - - 0 0 0 0 0
All works including material, procedures, etc. should be satisfied
with local regulations and standards
4.2.1 Uncoated deformed bar (D ≤ 25mm) ASTM A615 grade 60 , or equivalent TON 13,117 - 1,090.35 156.77 1,247.11 0 14,302,055 2,056,287 16,358,342 0
4.2.2 Uncoated Deformed bar (D > 25mm) ASTM A615 grade 60 , or equivalent TON 0 - 1,090.35 156.77 1,247.11 0 0 0 0 0
Add Epoxy coated deformed bar (D ≤ 25mm) ASTM A615 grade 60 , or equivalent (including re-bar touch TON 1,193 - 1,221.52 207.85 1,429.37 0 1,457,273 247,965 1,705,238 0
up paint with epoxy)
4 Form Works 0 - - - - 0 0 0 0 0
4.3.1 Formwork, comply with ACI 347R Flat type for foundation & underground structures M2 121,427 64.82 62.40 19.24 146.46 7,870,898 7,577,045 2,336,255 17,784,198 0
Including scaffolding
4.3.2 Flat type for above ground structures M2 101,457 71.77 101.72 28.14 201.63 7,281,569 10,320,206 2,855,000 20,456,775 0
4.3.3 Formwork for Concrete Bunker (Wall Thk.: 2m) M2 0 - - - - 0 0 0 0 0
4.3.4 Slip form for silo EA 0 - - - - 0 0 0 0 0
4.3.5 Block out for anchor bolt H > 300mm only M2 0 - - - - 0 0 0 0 0
For equipment base plate and anchor
Excluding cleaning and chipping work(mechanical scope)
4.3.6 Staging for concrete structure H ≤ 6M, staging system shall be determined by subcontractor. But, M3 35,575 27.77 6.94 - 34.71 987,918 246,891 0 1,234,808 0
MS approval is required by the Doosan.
4.3.7 H > 6M, staging system shall be determined by subcontractor. M3 157,856 41.66 13.89 - 55.55 6,576,281 2,192,620 0 8,768,901 0
But, MS approval is required by the Doosan.
4 Other Works 0 - - - - 0 0 0 0 0
4.4.1 Waterstop PVC M 23,781 34.72 6.94 - 41.66 825,676 165,040 0 990,716 0
Tensile strength: >145 kg/cm2
W= 250mm, T= 5mm, central expansion bulb
4.4.2 Expansion joint Dowel bar & PVC cap M 2,717 92.95 86.58 0.75 180.28 252,545 235,238 2,038 489,821 0
Deformed bar D25, L= 600mm @600
Flashing cap, stainless steel T=1.2mm
4.4.3 Isolation joint PVC or rubber, 25mm M 62,214 34.94 11.03 - 45.97 2,173,757 686,220 0 2,859,978 0
4.4.4 PVC or rubber, 50mm M 15,924 69.89 22.06 - 91.95 1,112,928 351,283 0 1,464,212 0
4.4.5 Contraction joint Saw cutting w/ backup rod and sealant for roof slab, 2000 x M 10,745 92.95 86.58 0.75 180.28 998,748 930,302 8,059 1,937,109 0
2000
4.4.6 Saw cutting w/ backup rod and sealant for above ground slab M 12,456 57.63 14.71 3.09 75.43 717,839 183,228 38,489 939,556 0
4.4.7 Non-shrinkage grout for structural steel Cement-based, nonmetallic, non-shrink grout with following 7 M3 74 7,937.82 2,406.44 1,126.50 11,470.76 587,399 178,077 83,361 848,836 0
column (Including form work) days strength requirements (ASTM C1107) :
compressive strength = Min. 70 MPa
4.4.10 Ladder rung Hot dip galvanizing according to ASTM A153, W=400mm EA 569 138.87 27.77 - 166.64 79,017 15,801 0 94,818 0
4.4.11 Steel sleeve embedded in concrete ASTM A36, or equivalent, w/ rust resisting paint TON 44 10,415.27 4,339.69 2,603.82 17,358.78 458,272 190,946 114,568 763,786 0
4.4.14 Embedded steel (angle, channel, plate, Hot dip galvanizing according to ASTM A153 kg 329,814 8.33 3.47 2.08 13.88 2,747,351 1,144,455 686,013 4,577,818 0
etc embedded in concrete) including stud
or rebar for fixing
4.4.15 Re-opening, repair & finish work for concrete floor & wall, including sealing & steel flashing M2 239 83.32 27.77 - 111.09 19,913 6,637 0 26,551 0
works.
5 ROAD AND PAVING WORKS 0 - - - - 0 0 0 0 0
5 Other Works 0 - - - - 0 0 0 0 0
5.2.1 Interlocking block paving T = 80mm with sand bedding M2 7,539 43.45 52.02 0.58 96.05 327,570 392,179 4,373 724,121 0
5.2.2 Kerb stone W= 200mm, L= 1500mm, H= 300mm with sand bedding, M 5,218 41.63 12.75 15.29 69.67 217,225 66,530 79,783 363,538 0
cement mortar.
5.2.3 Concrete footpath T = 100mm w/ sub base M2 0 - - - - 0 0 0 0 0
6 STEEL WORKS 0 - - - - 0 0 0 0 0
6 Structural Steel Supply/Erection including shop drawing and Tekla model data 0 - - - - 0 0 0 0 0
6.1.1 Structural steel, painted Fy = 325 MPa, ASTM A572 or equivalent TON 174 7,147.43 533.43 394.09 8,074.95 1,243,654 92,816 68,571 1,405,041 0
Built-up member (heavy weight > Surface preparation: SSPC-SP 10
300kg/m) 1st: Epoxy zinc phosphate Primer (75 μm)
6.1.2 Structural steel, painted 2nd: MIO epoxy (1/2 coats, 200 μm) TON 98 7,379.43 589.27 394.09 8,362.79 723,184 57,748 38,620 819,553 0
Built-up member (heavy weightt ≤ 3rd: Re-coatable polyurethane (1 coat, 60 μm)
300kg/m)
6.1.3 Structural steel, painted Fy = 235 MPa, ASTM A36 or equivalent TON 1,357 6,881.90 645.11 394.09 7,921.10 9,338,741 875,414 534,775 10,748,931 0
Roll member (medium weight Surface preparation: SSPC-SP 10
300~150kg/m) 1st: Epoxy zinc phosphate Primer (75 μm)
2nd: MIO epoxy (1/2 coats, 200 μm)
6.1.4 Structural steel, painted TON 765 7,197.87 700.95 583.83 8,482.65 5,506,369 536,227 446,631 6,489,227 0
3rd: Re-coatable polyurethane (1 coat, 60 μm)
Rolled member (light weight ≤ 150kg/m)
6.1.5 Structural steel, painted TON 899 8,031.92 896.39 583.83 9,512.14 7,220,695 805,858 524,865 8,551,418 0
Rolled member (light weight < 20kg/m)
Item Material Description Unit Quantity
No. Unit Price(SAR) Amount Price(SAR)
Remark
Add Structural steel, painted Fy = 325 MPa, ASTM A572 or equivalent TON 100 9,368.56 700.95 583.83 10,653.34 936,856 70,095 58,383 1,065,334 Our consideration of sections are
Surface preparation: SSPC-SP 10 medium weight sections without
1st: Epoxy zinc phosphate Primer (75 μm) fireproofing
Add Structural steel, painted Fy = 235 MPa, ASTM A36 or equivalent TON 100 9,204.22 700.95 583.83 10,489.00 920,422 70,095 58,383 1,048,900 Our consideration of sections are
Surface preparation: SSPC-SP 10 medium weight sections without
1st: Epoxy zinc phosphate Primer (75 μm) fireproofing
6.1.6 Cold formed steel, painted Fy = 235 MPa, BS EN 10025 S275JR (or ASTM A36 or TON 194 7,445.94 627.44 681.18 8,754.56 1,444,512 121,724 132,149 1,698,385 기존 Al famar comment는 적용 불가
Purlin, Girth member equivalent) - Al fanar comment : Pre galvanzied
Painting system : finish Grade A653 Grade 50.
1st: Epoxy zinc phosphate Primer (75 μm)
2nd: MIO epoxy (1/2 coats, 200 μm)
3rd: Re-coatable polyurethane (1 coat, 60 μm)
6.1.7 Anchor bolt/nut/washer Including anchor frame with hot dip galvanizing TON 149 9,106.54 - - 9,106.54 1,356,875 0 0 1,356,875 0
ASTM A307 or equivalent
Painting system :
1st : hot dip galvanizing, ISO 1461 85 μm
6.1.8 Chemical anchor / expansive anchor According to manufacturer's standard TON 43 23,569.87 4,775.87 - 28,345.74 1,013,505 205,362 0 1,218,867
PLEASE RPOVIDE IN DETAILS AS
SIZE AND QUANTITY TO BE
PROVIDED IN NUMBERS
6.1.9 Common bolt/nut/washer for connection of purlin, girt and slot, etc., including painting TON 18 8,035.18 - - 8,035.18 144,633 0 0 144,633 0
ASTM A325 & Twist-off(TC) bolt or equivalent
Painting system :
1st : hot dip galvanizing, ISO 1461 85 μm
6.1.10 High strength bolt/nut/washer for connection of structural steel, including painting TON 119 11,249.26 - - 11,249.26 1,338,662 0 0 1,338,662 Mill finish (Black/HDG)
ASTM A490 & Twist-off bolt(TC) or equivalent
Painting system :
Equivalent than ASTM F1136 Zinc aluminum coating
6.1.11 Re-opening, repair & finish work due to for structural steel, deck plate, grating and chequered plate TON 114 8,654.88 2,990.43 583.83 12,229.14 986,657 340,909 66,557 1,394,122 0
design change including kick plate, including galvanizing
6.1.12 Convenient Facility of accessibility and Access way and access platforms for valve maintenance, over TON 448 9,798.32 896.39 583.83 11,278.54 4,389,646 401,585 261,557 5,052,787 0
safety for operation and maintenance bridge, silencer support including steel structure, mobile
inside Buildings platform, A type ladder, grating, chequered plate, handrail,
ladder etc. inside building
For coating system should be applied according to Item 6.1.1
and 6.3.3~6.3.11
6.1.13 Yard Platform of accessibility and safety Access way and access platforms for valve maintenance and TON 96 9,798.32 896.39 583.83 11,278.54 940,638 86,054 56,048 1,082,740 0
for operation and maintenance outside over bridge including steel structure, grating, chequered plate,
Building handrail, ladder etc. outside building(Yard Area)
For coating system should be applied according to Item 6.1.1
and 6.3.3~6.3.11
Add Building crane runway girder Runway straightness inspection & Correction Nos 52 - 1,469.50 - 1,469.50 0 76,414 0 76,414 수량 추가
- Melting shop : 9
inspection & correction Runway Elevation inspection & Correction
- Forging shop : 6
Rail to Rail Elevation inspection & Correction - Casting shop : 25
- Heat treatment shop : 5
- Machining shop : 7
6.2.1 Fire resistant painting for structural (Fire resistant time: 3 hour) M2 500 191.97 79.99 47.99 319.95 95,985 39,995 23,995 159,975
structure Provide fireproofing materials that have been listed and Alfanar: Quantity is very small so
(Cementitious fireproofing type) classified by one or more of the following testing authorities: competitive rate is not possible to
Underwriters Laboratories of Canada (ULC) provide for this item
Underwriters Laboratories (UL)
ITS (formerly Warnock Hersey)
or other testing and inspecting agency acceptable
to the architect and authorities having jurisdiction.
6.2.2 Fire resistant painting for structural (Fire resistant time: 2 hour) M2 100 169.34 70.56 42.33 282.23 16,934 7,056 4,233 28,223 0
structure Provide fireproofing materials that have been listed and
(Cementitious fireproofing type) classified by one or more of the following testing authorities:
Underwriters Laboratories of Canada (ULC)
Underwriters Laboratories (UL)
ITS (formerly Warnock Hersey)
or other testing and inspecting agency acceptable
to the architect and authorities having jurisdiction.
6 Other Works 0 - - - - 0 0 0 0 0
6.3.1 Metal decking including stud bolt, end T= 1.6mm(Deck plate), T=6mm(End plate), including hot dip M2 3,612 182.48 76.03 45.62 304.13 659,118 274,620 164,779 1,098,518 0
plate and other accessary materials galvanizing according to ASTM A123
Touch-up paint after decking including stud bolt etc.
6.3.3 Steel grating (serrated type) 25T @30mm bar(weight 34 kg/m2) M2 0 - - - - 0 0 0 0 0
including hot dip galvanizing according to
ASTM A123, self tapping screw bolt or
threaded stud type according to
6.3.4 specification 32T @30mm bar(weight 41 kg/m2) M2 2,632 344.05 143.36 86.01 573.42 905,540 377,324 226,378 1,509,241 0
- Grating clamp
6.3.5 45T @30mm bar(weight 53 kg/m2) M2 8,311 427.10 177.96 106.78 711.84 3,549,628 1,479,026 887,449 5,916,102 0
Add Extra grating clamp The extra grating clamps shall be provided. EA 3,000 6.27 2.61 1.57 10.45 18,810 7,830 4,710 31,350 0
6.3.6 Chequered plate 4.5T(weight 40.0 kg/m2) M2 0 - - - - 0 0 0 0 0
including hot dip galvanizing according to
6.3.7 ASTM A123 6.0T(weight 49.4 kg/m2) M2 2,439 518.98 216.24 129.75 864.97 1,265,792 527,409 316,460 2,109,662 AL fanar comment:HDG finish. Our
Proper method such as additional price is BaseD on provided weight/M2,
angle shall be reflected to protect If any increase in weight/M2 Our price
deflection of the chequered plate. May change on pro rata basic. Supply
and apply of any painting are not
considered. Supporting STRUCTURE
FOR these ITEM to be measured with
Steel structures.
6.3.9 Steel pipe handrail Top rail (32A, H=1,100 mm), one mid rail (25A), post (25A @ M 10,900 264.63 110.26 66.16 441.05 2,884,467 1,201,834 721,144 4,807,445 0
including hot dip galvanizing according to 1500mm), toe-plate H=100mm
ASTM A123 & Painting (weight 18.4 kg/m)
6.3.10 Stainless pipe handrail Top rail (32A, H=1,100 mm), one mid rail (25A), post (25A @ M 200 1,374.82 572.84 343.70 2,291.36 274,964 114,568 68,740 458,272 0
1500mm), toe-plate H=100mm
(weight 19.3 kg/m)
Add PFAS (Personal Fall Arrest System) PFAS for fixed ladders that extend more than 7.3m(24 feet). EA 50 - - - - 0 0 0 0 0
for ladder to meet OSHA or local
regulation
6.3.13 Manhole cover with frame (heavy duty D= 610mm EA 14 1,944.18 347.18 - 2,291.36 27,219 4,861 0 32,079 0
cast iron) Including engraving the Detailed specification to manufactural standard approved by
manhole information. local regulation
6.3.14 GRP(FRP) grating T = 32mm, with frame M2 132 1,624.78 704.77 406.20 2,735.75 214,471 93,030 53,618 361,119 0
Detailed specification to manufactural standard approved by
local regulation
9 Other Works 0 - - - - 0 0 0 0 0
9.3.1 Translucent sheet for wall 10mm Double type Polycarbonate /w UV protection M2 1,000 316.47 201.30 79.12 596.89 316,470 201,300 79,120 596,890 0
Add Translucent sheet for wall FRP(fiber reinforced plastics) corrugate/flat board M2 100 233.14 166.58 58.29 458.01 23,314 16,658 5,829 45,801 0
T=1.5mm /w UV protection
9.3.2 Translucent sheet for roof 10mm Double type Polycarbonate /w UV protection M2 664 316.47 201.30 79.12 596.89 210,136 133,663 52,536 396,335 0
Add Translucent sheet for roof FRP(fiber reinforced plastics) corrugate/flat board M2 100 233.14 166.58 58.29 458.01 23,314 16,658 5,829 45,801 0
T=1.5mm /w UV protection
9.3.3 Re-opening, repair & finish work for cladding wall including sealing & steel flashing works. M2 27 95.29 39.70 23.82 158.81 2,573 1,072 643 4,288 0
10 WINDOWS AND DOORS WORKS 0 - - - - 0 0 0 0 0
10 Windows including lockset, caulking/sealant, hardware & accessories 0 - - - - 0 0 0 0 0
10.1.1 Single glazed aluminium windows including frame with solar reflective glass (Aluminum frames: M2 843 812.39 338.50 203.10 1,353.99 684,845 285,356 171,213 1,141,414 0
Fixed type min. depth of 38mm and Min. thk. of 1.6 mm)
T= min. 6mm glass, with external sunshade, coated on the
exterior side with a transparent bronze, grey, or approved tint,
10.1.2 Single glazed aluminium windows M2 0 - - - - 0 0 0 0 0
metallic oxide coating.
Sliding type
Insulation to be filled in all frame
Damp proof course applied around window's opening
10.1.3 Single glazed aluminium windows M2 0 - - - - 0 0 0 0 0
Fixed & projection type
10.1.4 Double glazed aluminium windows including frame with solar reflective glass (Aluminum frames: M2 4,186 833.22 347.18 208.31 1,388.71 3,487,859 1,453,295 871,986 5,813,140 0
Fixed type min. depth of 38mm and Min. thk. of 1.6 mm)
T= 6mm+A12mm+6mm, Insulated, with external sunshade,
glazed with solar reflective glass, BS 6375 Part 1 for an
10.1.5 Double glazed aluminium windows exposure category 1600. M2 1,491 958.20 399.25 239.55 1,597.00 1,428,676 595,282 357,169 2,381,127 0
Sliding type
Insulation to be filled in all frame
Damp proof course applied around window's opening
10.1.6 Double glazed aluminium windows M2 0 - - - - 0 0 0 0 0
Fixed & projection type
Item Material Description Unit Quantity
No. Unit Price(SAR) Amount Price(SAR)
Remark
10.1.7 Curtain walling system including frame with solar reflective glass M2 0 - - - - 0 0 0 0 0
T= 6mm+A16mm+6mm, Insulated, glazed with solar reflective
glass, BS 6375 Part 1 for an exposure category 1600.
Insulation to be filled in all frame
Additional requirement
1) Calculation of wind resistance for wall
2) Field Mock-up tests, conducted by an independent third
party agency accredited by AAMA for air infiltration and water
penetration resistance
3) Shop drawing including flashings, attachments, interior
finishes, and indicating sequencing of the work
10.1.8 Aluminum louver All external louvers built into the external cladding shall have an M2 17 916.54 381.89 229.14 1,527.57 15,581 6,492 3,895 25,969 0
in-built sand trap, and the louver frame shall be sealed to the
surrounding construction
10.1.9 Glass block including stainless steel frame(1.5t) and reinforcing bar M2 0 - - - - 0 0 0 0 0
Add Ballistic resistant window Window glass, glazing type, frame details and frame material M2 58 7,915.60 3,298.17 1,978.90 13,192.67 459,105 191,294 114,776 765,175
should be ballistic resistant to level III of NIJ 0108.01 standards
10 Doors including master key system, lockset, caulking/sealant, hardware & accessories like door clo 0 - - - - 0 0 0 0 0
10.2.1 30 minutes fire rated steel swing door including steel frame M2 0 - - - - 0 0 0 0 0
- Frame, min. 1.6mm, galvanized and paint
- Each leaf, min. 1.2mm, galvanized and paint
w/40mm glass wool
10.2.2 60 minutes fire rated steel swing door M2 0 - - - - 0 0 0 0 0
Door with vision panel should be satisfied with related fire-rating
according to local or international certification
10.2.3 90 minutes fire rated steel swing door Damp proof course applied around door's opening M2 664 2,020.75 199.14 9.22 2,229.11 1,341,778 132,229 6,122 1,480,129 - Al fanar comment : Considered size
of the door is 900 x 2150 mm as
details are not provided by clients.
10.2.4 120 minutes fire rated steel swing door M2 1,055 2,121.79 199.14 9.22 2,330.15 2,238,488 210,093 9,727 2,458,308 - Al fanar comment : Considered size
of the door is 900 x 2150 mm as
details are not provided by clients.
10.2.5 Wood door including wood frame M2 30 3,518.52 199.14 9.22 3,726.88 105,556 5,974 277 111,806 0
- Frame, 45x250, urethane finish
- Each leaf, min. 1.5mm, urethane finish
10.2.6 Steel folding door w/automatic motor Big door open / Close system M2 0 - - - - 0 0 0 0 0
drive including steel frame
(including emergency manual chain) Double slate type and 1(one) man door
- Galvanized steel slats : 0.7mm(each face)
- Polyurethane insulation : min. 50mm
- in normal condition, automatically operated
- in emergency condition, manually operated, like
stop/open/close
Damp proof course applied around door's opening
Add Steel slidning door w/motor drive Big door open / Close system M2 1,842 1,522.94 634.56 380.74 2,538.24 2,805,255 1,168,860 701,323 4,675,438 Alfanar: Maximum size is considered
(including emergency manual chain) Including Door rail 4.5 meter height and 3.5~4 width
Double type and 1(one) man door
- Galvanized steel slats : 0.7mm(each face),power coated
- Polyurethane insulation : 50mm
10.2.7 Steel rolling shutter door w/motor drive Big door open / Close system M2 156 1,606.27 669.28 401.57 2,677.12 250,578 104,408 62,645 417,631 Alfanar: Maximum size is considered
(including emergency manual chain) 4.5 meter height and 3.5~4 width
1. Currtain
Industrial quality exterior door with -Slate : Interlocked flat-faced slats, 38mm high by 13mm deep;
automatic drive motor of stop and 1.016mm aluminum with extruded tubular aluminum bottom bar
closing, including frame with continuous lift handle and vinyl
- in normal condition, automatically astragal
operated - Slat Finish: Aluminum, Clear Anodized
- in emergency condition, manually - Bottom Bar Finish: Aluminum Bar/ Aluminum Slat
operated, like stop/open/close 2. Guides:
- Aluminum: Heavy duty extruded aluminum sections with snap-
on to conceal fasteners. Provide polypropylene pile runners on
both sides of curtain to eliminate metal to metal contact
between guides and curtain.
Item Material Description Unit Quantity
No. Unit Price(SAR) Amount Price(SAR)
Remark
10.2.8 Glass entrance doors T= 10mm fully tempered safety glass, door shall be proprietary M2 135 2,374.68 989.45 593.67 3,957.80 320,582 133,576 80,145 534,303 0
products framed with anodized or shop enameled aluminum,
including frame
Damp proof course applied around door's opening
Add Ballistic resistant door Door and frame material should be ballistic resistant to level III M2 4 12,081.71 5,034.05 3,020.43 20,136.19 48,327 20,136 12,082 80,545 0
of NIJ 0108.01 standards
Add X-ray bunker door Door Size: 9m(W) X 10m(H) EA 1 157,478.83 65,616.18 39,369.71 262,464.72 157,479 65,616 39,370 262,465 0
Door material: Concrete (thk. 2.5m)
Automatic Type with Chain pulley method, Including Motor&
Reducer
10 Other Works 0 - - - - 0 0 0 0 0
10.3.1 Curtain box 150mm x 150mmx 1.2mm galvanized steel w/powder coating M 2,038 118.04 20.83 - 138.87 240,566 42,452 0 283,017 0
10.3.2 Insect screen Aluminum M2 0 - - - - 0 0 0 0 0
10.3.3 Stainless steel M2 8,322 236.08 41.66 - 277.74 1,964,658 346,695 0 2,311,352 0
10.3.4 Vertical blind Poly-PVC roll screen M2 2,038 277.74 69.44 - 347.18 566,034 141,519 0 707,553 0
10.3.5 Panic bar for emergency exit door EA 262 3,728.67 277.74 - 4,006.41 976,912 72,768 0 1,049,679 0
11 FINISH WORKS including curing works 0 - - - - 0 0 0 0 0
11 Waterproofing & damp proofing 0 - - - - 0 0 0 0 0
11.1.1 Under ground : T= 4mm bituminous membrane M2 22,553 34.16 14.23 8.54 56.93 770,410 320,929 192,603 1,283,942 0
Waterproof membrane
11.1.2 Under ground : T= 4mm bituminous membrane w/ T= 15 mm, protection board M2 3,075 48.33 20.14 12.08 80.55 148,615 61,931 37,146 247,691 0
Waterproof membrane w/ protection
board
11.1.3 Under ground : T= 250μm, on concrete surface in contact with soil M2 518,333 11.08 22.61 2.23 35.92 5,743,130 11,719,509 1,155,883 18,618,521 0
Bituminous painting
11.1.4 Roof waterproof membrane Solar shield bituminous membrane(4mm) M2 19,902 78.32 32.63 19.58 130.53 1,558,725 649,402 389,681 2,597,808 0
Bituminous membrane 2 sheets (4mm+4mm) w/primer
200microns PE film
11.1.5 GRP lamination for waterproofing sealing For opening of roof of steel building M3 39 541.59 225.66 135.40 902.65 21,122 8,801 5,281 35,203 0
0.3m*0.3m*0.3m(H) per each point
11.1.6 Liquid water proofing 2 layers for kitchen, toilet & etc. M2 1,342 44.16 18.40 11.04 73.60 59,263 24,693 14,816 98,771 0
11.1.7 Damp proof courses Low density polyethylene, Width 500mm M 8,962 4.17 1.74 1.04 6.95 37,372 15,594 9,320 62,286 0
11.1.8 Roof vapour barrier Non-woven polyester geotextile(2mm, 300g/m2) M2 17,703 5.00 2.08 1.25 8.33 88,515 36,822 22,129 147,466 0
11.1.9 PE film for ground 2 layers of min. 0.06 P.E film M2 156,073 3.33 1.39 0.83 5.55 519,723 216,941 129,541 866,205 0
11.1.10 Protection concrete T = 100mm with 3mm exp. Joint @ 3,000 M2 0 - - - - 0 0 0 0 0
Add Gravel for roof T = 50mm M2 17,703 6.87 2.76 6.26 15.89 121,620 48,860 110,821 281,301 0
11 Insulation Works 0 - - - - 0 0 0 0 0
11.2.1 Wall Insulation for block and/or brick work T= min. 50 mm, rigid type, thermal conductivity of 0.020 W/mK M2 28,787 46.66 3.06 6.94 56.66 1,343,201 88,088 199,782 1,631,071 0
11.2.2 Roof Insulation T= min. 100 mm, rigid type, thermal conductivity of 0.020 W/mK M2 17,703 93.32 6.13 13.89 113.34 1,652,044 108,519 245,895 2,006,458 0
11.2.3 Insulation for ceiling Spray foam insulation, T: 60mm, heat transmission coefficient of M2 100 166.64 69.44 41.66 277.74 16,664 6,944 4,166 27,774 0
0.05W/MK
11 Painting & Coating Works 0 - - - - 0 0 0 0 0
11.3.1 Floor, Epoxy paint DFT 400 μm M2 153,883 32.50 29.41 - 61.91 5,001,198 4,525,699 0 9,526,897 0
11.3.2 Floor, Epoxy seal coat with epoxy screed DFT 3.0 mm M2 0 - - - - 0 0 0 0 0
topping
11.3.3 Floor, Heavy duty hardener DFT 3.0 mm M2 512 131.37 33.09 - 164.46 67,261 16,942 0 84,204 0
11.3.4 Floor, Oil resistant paint DFT 400 μm M2 433 32.50 29.41 - 61.91 14,073 12,735 0 26,807 0
11.3.5 Floor, Chemical resistant paint DFT 400 μm M2 2,269 39.40 24.51 - 63.91 89,399 55,613 0 145,012 0
11.3.6 Floor, Acid/Alkali resistant paint DFT 3.0 mm M2 1,335 285.82 24.51 - 310.33 381,570 32,721 0 414,291 0
11.3.7 Floor, Dust proof coating Under access elevator internal area, etc . 2coat silane-siloxane, M2 5,393 13.75 29.41 - 43.16 74,154 158,608 0 232,762 0
DFT 250 μm
11.3.8 Wall, Emulsion paint DFT 90 μm M2 46,480 7.76 22.12 6.94 36.82 360,685 1,028,138 322,571 1,711,394 0
11.3.9 Wall, Epoxy paint DFT 400 μm M2 51,723 32.50 29.41 6.94 68.85 1,680,998 1,521,173 358,958 3,561,129 0
11.3.10 Wall, Oil resistant paint DFT 400 μm M2 687 32.50 29.41 6.94 68.85 22,328 20,205 4,768 47,300 0
11.3.11 Wall, Chemical resistant paint DFT 400 μm M2 2,428 39.40 24.51 6.94 70.85 95,663 59,510 16,850 172,024 0
11.3.12 Wall, Acid/alkali resistant paint DFT 400 μm M2 1,656 285.82 24.51 6.94 317.27 473,318 40,589 11,493 525,399 0
11.3.13 Ceiling, Emulsion paint DFT 80 μm M2 20,300 7.33 24.06 6.94 38.33 148,799 488,418 140,882 778,099 0
11.3.14 Ceiling, Epoxy paint DFT 400 μm M2 2,898 32.50 29.41 6.94 68.85 94,185 85,230 20,112 199,527 0
11.3.15 Ceiling, Oil resistant paint DFT 400 μm M2 0 32.50 29.41 6.94 68.85 0 0 0 0 0
11.3.16 Ceiling, Chemical resistant paint DFT 400 μm M2 695 39.40 24.51 6.94 70.85 27,383 17,034 4,823 49,241 0
Item Material Description Unit Quantity
No. Unit Price(SAR) Amount Price(SAR)
Remark
12 Skirting Works 0 - - - - 0 0 0 0 0
11.5.1 Skirting, H=100 Oil paint base M 4,570 3.25 2.94 0.69 6.88 14,853 13,436 3,153 31,442 0
11.5.2 Epoxy base M 3,998 3.25 2.94 0.69 6.88 12,994 11,754 2,759 27,506 0
11.5.3 Black PVC base M 2,253 19.86 7.52 - 27.38 44,745 16,943 0 61,687 0
11.5.4 Terrazzo Tile base M 0 - - - - 0 0 0 0 0
12 Suspended Ceiling Works 0 - - - - 0 0 0 0 0
11.6.1 Suspended ceiling (Size= 600 x 600) Perforated mineral acoustical tile, T=15 M2 5,806 61.61 33.42 6.94 101.97 357,708 194,037 40,294 592,038 0
11.6.2 Moisture proof acoustical PVC tile, T=15 M2 270 61.61 33.42 6.94 101.97 16,635 9,023 1,874 27,532 0
11.6.3 Moisture proof vinyl faced gypsum tile ceiling, T=12.5 M2 710 36.71 45.19 6.94 88.84 26,064 32,085 4,927 63,076 0
11.6.4 Fireproof acoustic mineral fiber fiber tile, T=15, 2 hours fire M2 0 - - - - 0 0 0 0 0
rated
14 MISCELLANEOUS WORKS 0 - - - - 0 0 0 0 0
14 Roof Drain Works 0 - - - - 0 0 0 0 0
14.1.1 Cast Iron roof drain dia.70mm EA 0 - - - - 0 0 0 0 0
14.1.2 dia.100mm EA 0 - - - - 0 0 0 0 0
14.1.3 dia.150mm EA 224 277.74 41.66 - 319.40 62,214 9,332 0 71,546 0
14.1.4 Hot Dip Galvanized Rain water dia.70mm M 0 - - - - 0 0 0 0 0
14.1.5 downpipe dia.100mm M 0 - - - - 0 0 0 0 0
14.1.6 dia.150mm M 1,740 82.29 34.29 20.57 137.15 143,185 59,665 35,792 238,641 0
14.1.7 Eave gutters 3.2t Galvanized steel plate M2 686 303.20 126.33 75.80 505.33 207,995 86,662 51,999 346,656 0
14 Dry Wall Panel Works(including stud, frame and accessories etc.) 0 - - - - 0 0 0 0 0
14.2.1 Light weight partition for toilet 0.8mm metal laminate M2 0 - - - - 0 0 0 0 0
Cubicle, T= 20mm
14.2.2 1.2mm stainless steel, hung type M2 416 708.24 295.10 177.06 1,180.40 294,628 122,762 73,657 491,046 0
Cubicle, T= 30mm
14.2.3 Light weight partition for office Thickness 30mm w/accessories-including PVC skirting, M2 2,276 459.94 191.64 114.98 766.56 1,046,823 436,173 261,694 1,744,691 0
Framework: A pre-finished aluminum head and floor channel.
12mm toughened safety glass
Glass doors w/frame
14.2.4 S.G.P(steel gypsum panel) partition wall Metal stud framing wall with finished steel+2 ply gypsum M2 3,620 61.21 34.29 6.94 102.44 221,580 124,130 25,123 370,833 0
boards on both sides and min. 50mm insulation
(Fire resistant time: 3 hour)
14 Raised Flooring Works 0 - - - - 0 0 0 0 0
14.3.1 Anti-static raised access floor w/ Height : less tham 0.1m M2 0 - - - - 0 0 0 0 0
accessories, Including anti-static HDPE
tile(size : 600x600mm)
14.3.2 Height : 1,0m~1,5m M2 2,838 763.79 69.44 - 833.23 2,167,636 197,071 0 2,364,707 0
14.3.3 Height : 1.5m~2.0m M2 0 - - - - 0 0 0 0 0
14.3.4 Hilti Integrated floor system w/ Height: 1.6m, min. Size 600x600 M2 0 - - - - 0 0 0 0 0
accessories
14 Fire resistant sealant and Opening Repair Works 0 - - - - 0 0 0 0 0
14.4.1 Fire stop for wall, 3 hours rated Sealant with caulking M 290 83.32 27.77 - 111.09 24,163 8,053 0 32,216 0
14.4.2 Fire stop for floor, 3 hours rated - Width, 250mm, fire resisting splay(wet type 3mm) M 2,902 277.74 69.44 - 347.18 806,001 201,515 0 1,007,516 0
- 100K mineral wool, 125T, galvanized steel plate 1.6T
- Support bracket of fire stop system
15 Other Works 0 - - - - 0 0 0 0 0
Item Material Description Unit Quantity
No. Unit Price(SAR) Amount Price(SAR)
Remark
14.5.1 Decorative handrail H= 1,100 mm, used for general architectural building M 50 1,374.82 572.84 343.70 2,291.36 68,741 28,642 17,185 114,568
14.5.2 Elevator for passenger Requirement EA 2 196,583.57 81,909.82 49,145.89 327,639.28 393,167 163,820 98,292 655,279 0
Capacity : Min 1,000kg, 60m/min
Including all facilities for erection and maintenance like car,
door, guide rail, buffer, hoist, lifting rug, electrical system,
control system, HVAC system, CCTV system(distance between
elevator & Control room : 0.8km) and shop drawings etc.
Building Information
Concrte Core Size : 3,000mm x 3,000mm
Pit Depth : 1,500mm
14.5.5 Interior construction for ergonomic Engineering, Design, Procurement, Fabrication, Transportation, M2 400 - - - - 0 0 0 0
Erection including Quality Control & Warranty, temporary works
including 3D drawings Alfanar: Excluded and will be quoted upon
for followings; (Area) provision of detailed design of
- Floor finish : Anti-static vinyl tile w/raised floor Ergonomics.
- Wall finish : Woodchip film w/gypsumboard
- Ceiling finish : Vinyl paint on gypsumboard w/ suspended
ceiling w/frame
- Lighting & Cable work with support, including design &
calculation of indirect illumination
14.5.6 Back panel support for LARGE SCREEN required dimension : 00m x 00m x 00m EA 0 - - - - 0 0 0 0 0
Including Installation(Engineer)
(when ergonomic design is not considered for CCR only)
14.5.7 Anti-slip stair nosing PVC, Tread width = min. 50mm M 980 180.53 48.60 - 229.13 176,919 47,628 0 224,547 0
14.5.8 Aluminium, Tread width = min. 50mm M 476 347.18 62.49 - 409.67 165,258 29,745 0 195,003 0
14.5.9 Copper, Tread width = min. 50mm M 4,065 486.05 62.49 - 548.54 1,975,793 254,022 0 2,229,815 0
14.5.10 Bollard Painted steel, dia. 150mm, height 1,100mm including fixing EA 20 902.86 222.59 171.50 1,296.95 18,057 4,452 3,430 25,939 0
material
14.5.11 Floor material divider strip Stainless, W = 20mm M 781 13.89 2.78 - 16.67 10,848 2,171 0 13,019 0
14.5.12 Aluminium flashing T=1.0mm M2 942 249.97 104.15 62.49 416.61 235,472 98,109 58,866 392,447 0
Sealant with caulking
* Note
1. The sub-contractor of civil, structural and architectural works shall observe the Specification, Local regulation, and related International code for the material supply, erection and test.
2. Wall and roof cladding shall be designed and installed to comply with the manufacturers requirements to obtain a 30 years guarantee on the completed roofing and walling.
3. Surface preparations, paint systems, and galvanizing shall be selected to give a minimum practical life to first maintenance repainting in 10 years
4. All buildings, their structure, foundations and fabric, together with all other civil engineering works shall be designed and constructed for a design life of 40 years.
BILL OF QUNTITY FOR BUILDING PLUMBING
PJT Name : Oasis (Casting & Forging)
Capacity
N.A (Unit : SAR)
1.2.4 Floor mounted, Vertical storage type Working pressure : 1134 kPa Nos. 6 0 0 0 0 0 0 0 0 Excluded
Storage capacity : 2000 liter , 25 kw Tank : STS316L
Control : Automatic immersion water thermostat (16
℃~82 ℃), high temperature limit thermostat
- W/ brass water connections and dip tube, drain
valve, high density magnesium anode, temperature
and pressure relief valve, junction box, on-off switch,
include electrical work.
1 Pump 0 0 0 0 0 0 0
1.3.1 Set 1 112,828 3,606 0 116,435 112,828 3,606 0 116,435 0
- W/ discharge check valves, discharge and suction
isolating valves, leak-offs and gauges, sealed off
Sump pump set - heavy duty submersible self
electric motor, flexible power cable 20m long, pressure
priming type
relief valve, pressure gauges, LCP panel, cable
*capacity : 250LPM x 10 m (2.2kw) x 2 pump
connection, suction screen SUS316L, 316 stainless
steel chain ,Include electrical work.
1.3.2 Hot water circulation inline pump set Set 7 0 0 0 0 0 0 0 0 Excluded
Stainless Steel
*Capacity : : 11 LPM x 5 m (Head) x 2EA (one
'- W/ LCP(600x600mm), cable, Include electrical work.
for stand by)
1.3.3 Hot water circulation inline pump set Set 3 0 0 0 0 0 0 0 0 Excluded
Stainless Steel
*Capacity : : 30 LPM x 5 m (Head) x 2EA (one
'- W/ LCP(600x600mm), cable, Include electrical work.
for stand by)
1 Refrigerated Drinking Water Fountain 0 0 0 0 0 0 0 0
Item Total Unit Price (SAR) Amount (SAR)
Material Description Unit Remank
No.
1.4.2 Drinking water cooler (bottle type) - W/ central storage unit, durable polypropylene Nos. 37 0 0 0 0 0 0 0 0 Excluded
*capacity: 15 lit/h faucets, Inc. Water filter & electrical work.
0 0 0 0 0 0 0 0 0
2 SANITARY (including accessories, all fittings) 0 0 0 0 0 0 0
2 Water Closet 0 0 0 0 0 0 0
2.1.1 Western water closet - White-glazen vitreous china, floor mounted, siphon Nos. 11 2,224 593 0 2,818 24,469 6,525 0 30,995 0
Low tank type, jet flush action
ASTM A112.19.2-2008 / CSA B45.1-08 w/ tank (6 lit/flush, solid plastic seat, toilet fittings,
angle valve, toilet flange, complete with deodorizer
and drain trap & flushing valve, toilet paper
holder(polished chrome ), waste can, waste can, coat
hook, toilet sleeve, etc.
2.1.2 - Vitreous china fixture, Manual flush valve Nos. 43 4,291 1,144 0 5,435 184,513 49,204 0 233,717 0
W/solid plastic seat, toilet fittings, angle valve, toilet
Water closet (Floor mount flush valve type) flange, complete with deodorizer and drain trap &
ASME A112.19.2-2008 /CSA B45.1-08 flushing valve, toilet paper holder, waste can, coat
hook, toilet sleeve, etc.
2.1.3 Nile squatting WC Pan -Vitreous china, rectangular shape with integral foot Nos. 43 3,209 856 0 4,065 137,990 36,797 0 174,787 0
High water tank type treads
Nile squatting WC pan or equivalent products Include high level cistern(495mmx130mm), mount
flush with the floor finish & FTGS, taps, bracket, Inlet
connector, flush pipe(6lit/flush), P-trap, toilet paper
holder, angle valve, coat hook, etc.
2.1.4 Hose bib (Health faucet) - W/ vacuum breaker, hand spray with angle valve, 1m Nos. 94 437 117 0 554 41,088 10,957 0 52,045 0
hose, hand trigger
2 Lavatory 0 0 0 0 0 0 0
2.2.1 Lavatory basin -W/ drain p-trap & chromium plated faucet, manual Nos. 30 2,863 763 0 3,626 85,885 22,903 0 108,788 0
White-glazen vitreous china, square wall hung regulation mixing valve (hot and cold water), soap
type holder, angle valve, lavatory sleeve35A, etc.
2.2.2 Lavatory basin - W/ drain p-trap & chromium plated faucet, manual Nos. 96 1,324 353 0 1,677 127,133 33,902 0 161,035 0
White-glazen vitreous china, oval under counter regulation mixing valve (hot and cold water), soap
type holder, angle valve, lavatory sleeve 35A, etc.
ASME A112.19.2M for vitreous china fixtures /
CAN/CSA B45 series
2 Urinal 0 0 0 0 0 0 0
2.3.1 Urinal - W/ automatic flushing sensor(battery type) and drain Nos. 57 6,098 1,626 0 7,724 347,578 92,688 0 440,266 0
ASME A112.19.2 P-trap & flushing facilities., angle valve, urinal sleeve
40A, etc.
2 Shower 0 0 0 0 0 0 0
Item Total Unit Price (SAR) Amount (SAR)
Material Description Unit Remank
No.
3 Toilet Accessories 0 0 0 0 0 0 0
2.7.1 Electrical hand dryer Nos. 32 3,754 1,001 0 4,756 120,140 32,037 0 152,177 0
2.7.2 Towel bar with shelf Polished chrome,1mm thick brass, 24" long towel bar, Nos. 148 242 65 0 307 35,869 9,565 0 45,435 0
2.7.3 Mirror Chromium plasted M2 274 889 237 0 1,127 243,685 64,982 0 308,666 0
2.7.4 Liquid soap holder & dispenser (Stainless steel) Manufacture standard Nos. 270 370 99 0 469 99,908 26,641 0 126,549 0
2.7.5 Paper towel dispenser and disposal unit Manufacture standard Nos. 32 491 131 0 622 15,718 4,192 0 19,910 0
2.7.6 Lavatory counter Synthetic marble M2 96 1,443 289 0 1,731 138,490 27,698 0 166,188 0
3 PIPE (including pipe fittings, connection fittings, pipe painting, color bandings, labels, all relevan 0 0 0 0 0 0 0
3 Pipe 0 0 0 0 0 0 0
3.1.1 Copper pipe & fittings - size : 15A ASTM B88 L-Type M 3,733 61 15 0 77 228,945 57,227 0 286,172 0
3.1.2 Copper pipe & fittings - size : 20A ASTM B88 L-Type M 494 97 24 0 121 47,918 11,980 0 59,898 0
3.1.3 Copper pipe & fittings - size : 25A ASTM B88 L-Type M 2,554 140 35 0 175 356,717 89,186 0 445,903 0
3.1.4 Copper pipe & fittings - size : 32A ASTM B88 L-Type M 28 243 61 0 304 6,804 1,701 0 8,505 0
3.1.5 Copper pipe & fittings - size : 40A ASTM B88 L-Type M 30 243 61 0 304 7,290 1,823 0 9,113 0
3.1.6 Copper pipe & fittings - size : 50A ASTM B88 L-Type M 1,519 370 92 0 462 561,529 140,386 0 701,915 0
3.1.7 Copper pipe & fittings - size : 65A ASTM B88 L-Type M 84 524 131 0 655 44,016 11,004 0 55,020 0
Item Total Unit Price (SAR) Amount (SAR)
Material Description Unit Remank
No.
3.3.18 Gate valve - size : 80A Thru-conduit, A216-WCB body, BB, ISNRS, graphite Nos. 6 2,705 721 0 3,426 16,229 4,328 0 20,557 0
packing, API 6A, Trim ENP or SS 410, API 3000
3.3.19 Check valve - size : 15A Bronze BODY, trim ASTM B61/B62, MSS-SP-80 Nos. 35 175 47 0 222 6,140 1,637 0 7,777 0
threaded
3.3.20 Check valve - size : 20A Bronze BODY, trim ASTM B61/B62, MSS-SP-80 Nos. 14 217 58 0 275 3,040 811 0 3,850 0
threaded
3.3.21 Check valve - size : 25A Bronze BODY, trim ASTM B61/B62, MSS-SP-80 Nos. 23 306 81 0 387 7,027 1,874 0 8,900 0
threaded
3.3.22 Check valve - size : 32A Bronze BODY, trim ASTM B61/B62, MSS-SP-80 Nos. 2 424 113 0 538 849 227 0 1,075 0
threaded
3.3.23 Check valve - size : 40A Bronze BODY, trim ASTM B61/B62, MSS-SP-80 Nos. 0 0 0 0 0 0 0 0 0 0
threaded
3.3.24 Check valve - size : 50A Bronze BODY, trim ASTM B61/B62, MSS-SP-80 Nos. 8 737 197 0 933 5,895 1,572 0 7,467 0
threaded
3.3.25 Check valve - size : 80A Bronze ASTM B61/B62 or AL-BR body, trim ASTM Nos. 8 2,421 646 0 3,067 19,368 5,165 0 24,533 0
B61/62 OR MONEL OR AL-BR,BC
3.3.26 Auto air vent valve - size : 15A Bronze, y-type, Threaded Nos. 31 281 144 0 425 8,696 4,472 0 13,168 0
3.3.27 Strainer - size : 25A Bronze, y-type, Threaded Nos. 41 275 73 0 349 11,293 3,011 0 14,304 0
3.3.28 Strainer - size : 50A Bronze, y-type, Threaded Nos. 2 841 224 0 1,065 1,682 449 0 2,130 0
3.3.29 Strainer - size : 80A Bronze, y-type, FF flanged Nos. 9 1,843 491 0 2,334 16,586 4,423 0 21,009 0
3.3.30 Pressure relief valve - size : 25A Bronze, Threaded Nos. 20 5,410 1,443 0 6,852 108,195 28,852 0 137,047 0
3.3.31 Water hammer arrester - size : 25A Copper, W/Connector Nos. 14 866 231 0 1,096 12,118 3,231 0 15,349 0
3.3.32 Water hammer arrester - size : 50A Copper, W/Connector Nos. 4 1,407 375 0 1,782 5,626 1,500 0 7,126 0
3.3.33 Water hammer arrester - size : 80A Copper, W/Connector Nos. 8 1,948 519 0 2,467 15,580 4,155 0 19,735 0
Item Total Unit Price (SAR) Amount (SAR)
Material Description Unit Remank
No.
0
Total Amount ( 1.0+2.0+3.0) 11,663,027 3,355,950 0 15,018,976
NOTE.
1 Each pipe quantity should be included pipe fittings, pipe support, hanger, material for connections, painting and pipe label.
2 Each valve should be included connection material(union, gasket, flange and etc.)