Professional Documents
Culture Documents
Name of Work: Providing Park @ Ward no.11, Cheran Nagar, Kunnathur main road, in Karumandichellipalayam Town Panchayat.
2 One Square
126.00 M Coloumn
Metre
2 One Square
27.00 M For Roof
Metre
Supplying and Fabrication of Steel and placing in
position MS / Ribbed tor steel grills for RCC works
One Kilo
4 3200.00 Kg as per design given including cost of steel and GI
Gramme
binding wire in Floors etc., Complete complying
with standard specification in force per Kilogram.
.SL. TNDSS RATE IN
QTY. DESCRIPTION OF WORK UNIT AMOUNT
NO. NO. Figure WORDS
Reinforced Cement Concrete 1:1½:3 Mix (One part
cement, one and half part M-sand and three part of
aggregate)using 20mm size ISS HBG metal
machine crushed from approved quarry including
3 cost and conveyance of all materials to site, One Cubic
5 39.00 M
loading and unloading charges and labour charges Metre
for mixing, laying and curing but excluding cost of
reinforcement etc. Complete with std.
Specifications.(Using Vibrator) TNDSS NO: 30 V,
VI (S3), VII-3.
Brick Work in Cement Mortor 1:5 Mix (one cement,
five sand ) using new best Quality of Fly Ash Bricks
Bricks of size 230mmx110mmx70mm Virtudly the
Brick Shall be Sound Compact and Uniform in
Shape force from visible creacks worpge flone an
organic matter, the Brick Shall be solid with froge One Cubic
6 66.00 M3
on line of its bearing side classes designation no Metre
less than 35/kgsm an average compressive
strength including cost and conveyance of all
materials to site. loading and unloading charges
and labour charges for mixing, laying and curing
etc. complete. complying with std. specifications.
Special ceiling Plastering in Cement Mortor 1:3 Mix
(one Cement, Three M-sand ) 10mm thick
2 including cost and conveyance of all materials to One Square
7 10.00 M
site, loading and unloading charges and labour Metre
charges for mixing, laying and curing etc. complete
. complying with std. specifications
.SL. TNDSS RATE IN
QTY. DESCRIPTION OF WORK UNIT AMOUNT
NO. NO. Figure WORDS
Plastering in C.M. 1 : 5 (one cement, five sand) to
12 mm thick including all cost and conveyance
of all materials to site including cost of
cement which will be purchared locally by the One Square
8 546.00 M2 Metre
contractor and conveyance of the same to the
actual work site and cost form work including
watering curing and all leads of good potable
water and all other.
Plastering in Cement Mortar 1:3 Mix (one Cement,
Three M-sand ) 20mm thick including cost and
conveyance of all materials to site, loading and One Square
9 32.00 M2
unloading charges and labour charges for mixing, Metre
laying and curing etc. complete . complying with
std. specifications
.SL. TNDSS RATE IN
QTY. DESCRIPTION OF WORK UNIT AMOUNT
NO. NO. Figure WORDS
Providing UPVC (Un-Plasticized Polyvinyl Chloride)
Door: Providing and fixing casement doors
fabricated from un-plasticized polyvinyl chloride
(uPVC) sections. Profiles: The profiles should be
three chamber system which provides high
insulation properties with outer frame 60mm x
55mm with an outer wall thickness of 2.4mm. The
window unit should be designed with all corner
joints mitred and fusion welded. Windows should
be steel reinforced with 25 x 24 x 25mm steel
reinforcement with a thickness of 1mm to have
dimensional stability. The sash should be of 60 x
102mm. The mullion should be of 60 x 74mm. The One Square
10 4.00 M2 profiles should have co-extruded seals. Hardware: Metre
All the hardware like friction stays, handles should
be screwed with self tapping screws. The handles,
locks should be designed so that they cannot be
released from outside.Glazing: The window system
should be glazed with 5mm plain float glass / 6mm
bison lam Installation: The profiles should be cut to
length and welded 45 degrees. The window should
be designed such that the water drainage does not
pass through the reinforcement chamber. The
window system should be fixed directly to the
plastered brick wall using self expanding nylon plug
and driving ms electroplated screws into plug.(SOR
Supplying and fixing of M.S.Grill Gate of approved
design using necessary mild steel flats for inner
and outer members which should be fixed to Gate One Square
11 90.00 Kg
frames inclusive of priming coat of best approved Metre
quality red oxide primer etc., complete complying
with standard specifications.
.SL. TNDSS RATE IN
QTY. DESCRIPTION OF WORK UNIT AMOUNT
NO. NO. Figure WORDS
Supplying and fixing of M.S grill of approved design
for doors, windows and ventilators using necessary
mild steel flats for inner and outer memebers which
One Square
12 1290.00 Kg should be fixed to window frames inclusive of
Metre
priming coat of best approved quality red oxide
primer etc., complete complying with standard
specifications.
Supplying and fixing over the floors best quality of
Scratch Ceramic Tiles of 30 c.m x 30c.m x 6mm
One Square
13 11.00 M2 size of approved colour laying with cement
Metre
mortor 1:3 mix pointing the joints with colour
pigments etc. Complete.
Dadooing the walls with glazed tiles of 30 c.m x 30
c.m 6mm size laid in cement mortor 1:2 mix 10mm One Square
14 12.00 M2 Metre
thick and pointing with 0.40 kg white cement per
m2 etc.,Complete
Supplying and fixing in Position of Indian Oriya pan
type water closet with “P’’ or “S’’ trap to set in
brick jelly concrete 1:4:8 Mix concrete 10 cm thick One Square
15 2.00 Nos
using 20mm brick jelly and top finished with c.m. Metre
1:3 mix 20mm thick without any leakage etc.
complete.
Supplying and fixing in position of Indian make
White glazed earthen ware Flat Back Urinal of
approved quality including dismantling masonry if One
16 2.00 Nos
necessary and redoing the same to original Number
condition etc., complete as directed by the
departmental officers.
.SL. TNDSS RATE IN
QTY. DESCRIPTION OF WORK UNIT AMOUNT
NO. NO. Figure WORDS
Supplying and fixing in position best Indian make
white glazed earthenware WASH HAND BASIN of
560x406mm with a a pair of C.I. Brackets, 15mm
dia C.P. Pillar tap, 32mm G.I. Waster water pipe,
32mm dia C.P. Brass waster coupling, plug with
One
17 2.00 Nos chain, 15mm dia PVC connection, 15mm G.M.
Number
wheel valve with ISI mark and necessary G.I. union
and G.I. Elbow, including fixing wash hand basin in
position with white lead, clamps, teakwood plugs,
screws, rubber washer etc., complete without any
leakage complying with standard specifications.
Providing and laying, spreading and compacting
graded stone aggregates to Wet Mix Macadam
250mm thick specification including premixing the
materials with water at OMC in mechnanical mix
plant carriage of mixed material by tipper to site
laying in uniform layers with pavers in Sub Base/ One Cubic
18 16.00 M3
Base course on well prepared surface and Metre
compacting with vibratory roller to acheive the
desired density including cost of material, labour
charges, rentals for machinery, fuel and all other
incidental charges etc., complete as per clause
406 of MORTH
.SL. TNDSS RATE IN
QTY. DESCRIPTION OF WORK UNIT AMOUNT
NO. NO. Figure WORDS
Supplying and laying Precast Designer Paver Block
confirming to IS 1568-2006 specification
manufacturing and laying standard of M40 grade
63mm thick (table clauses 5 and 9.14) suitable for
bus terminals industrial complexes road on
expensive soils etc., including the cost of paver
block of size 225mm x 12.50 mm x 80mm and One
2
19 122.00 M conveyance of materials to work site mentioned in Square
the tender schedule cost of loading and unloading Metre
handling during over sand bed of 150mm thick
(excluding the cost of sand) conveyance paver
block cutter to site and hire charges of vibrators
and block cutter operator and labour for leveling
the sand to paver block etc., complete ISI 15658-
2006.
Exterior Emulsion paint Two coats with good
quality of approved Emulsion paint including cost of One
20 562.00 M2 all materials to site and all labour charges for Square
mixing applying and proper curring etc., Complete Metre
as per Standard Specifications
Painting Two Coats on new Iron works with best One
21 112.00 M2 synthetic enamel paint of approved colour and Square
quality etc., complete Metre
Conducting Geophysical survey, Quality and
Quanty test and transportation charges etc.,
including labour charges in the field rent of the One
22 1.00 No
vechile for reaching the palce,rent of the instrument Number
and excluding charges for the Geologist etc.,
complete as per Standard Specifications
.SL. TNDSS RATE IN
QTY. DESCRIPTION OF WORK UNIT AMOUNT
NO. NO. Figure WORDS
Supply and delivery of 200mm dia PVC plain
casing pipe (CS) including cost and conveyance of
materials and labour charges etc., :- Note:- One
23 12.00 Rm Approximate length of pipe is given the length may Running
be decided as per site conditions during drilling of Meter
borewell etc., complete as per Standard
Specifications
Drilling 150 mm Dia bore well in Hard rock areas
anywhere in the state inculding transportation to
site of work in hardrock areas inculding labour
24 charges for insertion of MS casing pipe and
flushing of borewell and for minutes. ( As per MD
TWAD Board Chennai Letter No :
F15090/AE/CM/TWAD/2013/ Dated:22/4/2013 )
One
150.00 Rm 0m to 150m Running
Meter
One
50.00 Rm 151m to 200m Running
Meter
Supplying and fixing in position of the following
PVC / G.I pipes and specials best approved quality
25 conforming to ISS and providing leak proof joint
with PVC adhesive etc., complete complying with
standard specification.
5.00 Hp Submersible motor 50 LPM x 175m Head One
1.00 No
Number
One
1.00 No 5.00 Hp Panel Board
Number
One
220.00 Rm 4.00 sqmm 3core copper cable Running
Meter
.SL. TNDSS RATE IN
QTY. DESCRIPTION OF WORK UNIT AMOUNT
NO. NO. Figure WORDS
One
50.00 Rm 50mm 6Ksc PVC Pipe Running
Meter
One
190.00 Rm 32mm UPVC Column Pipe Running
Meter
1.00 No M.S Kisok box One
Number
One
1.00 No 1000 Lit HDPE Tank
Number
Labour charges for the erection of submersible
pumpset in borewell/openwell including fixing and
jointing submersible cable withproper clamps upto
the starter to required depth and also fixing of riser
pipes to the required depth valves erection clamps,
pressure gauges upto the exterior wall of pump
One
26 1.00 No room and erection of panel board consisting of
Number
TPICN switches starter, voltmeter, Ammeter, three
pilot (indicating) lamps capacitor single phasing
preventor, water level guard and laying and jointing
the cables and twin earthing as per IE rules etc.,
complete and testing the pumpset and trail run for
10 days.
Supply and run of 4 x 6 sq.mm.(56Nos/0.3mm.Dia)
PVC insulated single core unsheathed copper One
27 20.00 Rm Running
conductor cable of 1100 V on 7/20 G.I. bearer wire Meter
for service connection mains (SD 68)
Supply and Run of 4 x 4 sq.mm(84/0.3) PVC
insulated Sc unsheathed Cu.Conductor of 1100V One
28 2.40 Rm grade in 25mm dia G.I pipe ("B"class) suitable Running
bend at both ends with necessary angle iron up Meter