Long span Ly = 6.95 m Assumed slab thickness D = 0.200 m Grade of concrete Fck = 25 N/mm2 Grade of reinforcement Fe = 500 N/mm2 SLAB S4 Clear cover to any reinforcement d' = 30 mm
1.2 Type of panel:
1.3 Loading: 6.95 m
Self weight of slab W1 = 5.00 kN/m 2
Roof finish W2 = 2.40 kN/m2 Live load W3 = 1.10 kN/m2 Miscellaneous (MEP) W4 = 0.00 kN/m2 Design Load with load factor of 1.5, Wu = 12.75 kN/m 2 5.95 m
Ratio of long span to short span, R = 1.2 Two Way Slab
1.4 Design:
Coeff BM Ast - (mm2) Dia Spacing (mm)
Short span direction % pt Table 26 (kNm/m) Req Prov (mm) Req Prov Negative moment at continuous edge 0.052 23.47 341.30 448.80 0.27 10 230 175 Positive moment at midspan 0.04 18.06 259.87 448.80 0.27 10 302 175
Ast - (mm2) Dia Spacing (mm)
Long span direction Coeff BM (kNm) % pt Req Prov (mm) Req Prov Negative moment at continuous edge 0 0.00 240.00 335.10 0.22 8 209 150 Positive moment at midspan 0.035 15.80 241.98 448.80 0.29 10 325 175
Min effective depth reqd dre = 82.48 mm dx = 165 dy = 155 mm
Clear cover to any reinforcement d' = 30.00 mm Effective depth provided dpr = 165.00 mm Greater than 'min eff depth reqd' Hence Ok Min reinforcement AsMin = 240.00 mm2 Limiting Moment Mulim = 90.52 kNm
1.5 Deflection check:
R/F provided at midspan along short direction = 448.80 mm2 % pt = 0.27 %
Stress in Rebar fs =0.58*fy*Ast (req) / Ast (pro) = 167.917 N/mm2 Modification factor (MF) = 2.0 As per Fig 4 of IS:456-2000 Type of slab for deflection check = Continuous Basic span to effective depth ratio (l/d)basic = 26 As per Cl. No. 23.2.1 of IS:456-2000 (L/d)max = (l/d)basic x MF = 52.00 (Lx/dpr)actual = 36.0606 (l / d)max > (l / d)actual Safe in Deflection' Hence Ok
1.6 Check for Shear:
Shear Force at the support Vu = (Wu*L/2) = 37.9313 kN/m
Nominal Shear Stress τv = Vu / (bdpr) = 0.22989 N/mm2 Concrete Shear Strength τc = 0.37834 From Table 19, IS:456-2000 k = 1.2 (Clause:40.2.1.1, IS:456-2000) k τc = 0.454 N/mm2 τv < k τc, No Need of Shear Reinforcement DEVELOPMENT OF MAA SAMLESWARI AT SAMBALPUR DESIGN OF SLAB - PILGRIM FACILITY TWO WAY SLAB 1 1.1 DESIGN OF SLAB SLAB S5
Short span Lx = 5.95 m
Long span Ly = 6.00 m Assumed slab thickness D = 0.200 m Grade of concrete Fck = 25 N/mm2 Grade of reinforcement Fe = 500 N/mm2 SLAB S5 Clear cover to any reinforcement d' = 30 mm
1.2 Type of panel:
1.3 Loading: 6.00 m
Self weight of slab W1 = 5.00 kN/m 2
Roof finish W2 = 2.40 kN/m2 Live load W3 = 1.10 kN/m2 Miscellaneous (MEP) W4 = 0.00 kN/m2 Design Load with load factor of 1.5, Wu = 12.75 kN/m 2 5.95 m
Ratio of long span to short span, R = 1.05 Two Way Slab
1.4 Design:
Coeff BM Ast - (mm2) Dia Spacing (mm)
Short span direction % pt Table 26 (kNm/m) Req Prov (mm) Req Prov Negative moment at continuous edge 0 0.00 240.00 448.80 0.27 10 327 175 Positive moment at midspan 0.047 21.21 307.16 448.80 0.27 10 256 175
Ast - (mm2) Dia Spacing (mm)
Long span direction Coeff BM (kNm) % pt Req Prov (mm) Req Prov Negative moment at continuous edge 0.057 25.73 402.71 448.80 0.29 10 195 175 Positive moment at midspan 0.043 19.41 299.59 448.80 0.29 10 262 175
Min effective depth reqd dre = 86.36 mm dx = 165 dy = 155 mm
Clear cover to any reinforcement d' = 30.00 mm Effective depth provided dpr = 165.00 mm Greater than 'min eff depth reqd' Hence Ok Min reinforcement AsMin = 240.00 mm2 Limiting Moment Mulim = 90.52 kNm
1.5 Deflection check:
R/F provided at midspan along short direction = 448.80 mm2 % pt = 0.27 %
Stress in Rebar fs =0.58*fy*Ast (req) / Ast (pro) = 198.477 N/mm2 Modification factor (MF) = 2.0 As per Fig 4 of IS:456-2000 Type of slab for deflection check = Simply supported Basic span to effective depth ratio (l/d)basic = 20 As per Cl. No. 23.2.1 of IS:456-2000 (L/d)max = (l/d)basic x MF = 39.16 (Lx/dpr)actual = 36.0606 (l / d)max > (l / d)actual Safe in Deflection' Hence Ok
1.6 Check for Shear:
Shear Force at the support Vu = (Wu*L/2) = 37.9313 kN/m
Nominal Shear Stress τv = Vu / (bdpr) = 0.22989 N/mm2 Concrete Shear Strength τc = 0.37834 From Table 19, IS:456-2000 k = 1.2 (Clause:40.2.1.1, IS:456-2000) k τc = 0.454 N/mm2 τv < k τc, No Need of Shear Reinforcement DEVELOPMENT OF MAA SAMLESWARI AT SAMBALPUR DESIGN OF SLAB - PILGRIM FACILITY TWO WAY SLAB 1 1.1 DESIGN OF SLAB SLAB S6
Short span Lx = 5.95 m
Long span Ly = 6.00 m Assumed slab thickness D = 0.200 m Grade of concrete Fck = 25 N/mm2 Grade of reinforcement Fe = 500 N/mm2 SLAB S6 Clear cover to any reinforcement d' = 30 mm
1.2 Type of panel:
1.3 Loading: 6.00 m
Self weight of slab W1 = 5.00 kN/m 2
Roof finish W2 = 2.40 kN/m2 Live load W3 = 1.10 kN/m2 Miscellaneous (MEP) W4 = 0.00 kN/m2 Design Load with load factor of 1.5, Wu = 12.75 kN/m 2 5.95 m
Ratio of long span to short span, R = 1.05 Two Way Slab
1.4 Design:
Coeff BM Ast - (mm2) Dia Spacing (mm)
Short span direction % pt Table 26 (kNm/m) Req Prov (mm) Req Prov Negative moment at continuous edge 0 0.00 240.00 448.80 0.27 10 327 175 Positive moment at midspan 0.039 17.60 253.16 448.80 0.27 10 310 175
Ast - (mm2) Dia Spacing (mm)
Long span direction Coeff BM (kNm) % pt Req Prov (mm) Req Prov Negative moment at continuous edge 0.045 20.31 314.14 448.80 0.29 10 250 175 Positive moment at midspan 0.035 15.80 241.98 448.80 0.29 10 325 175
Min effective depth reqd dre = 76.73 mm dx = 165 dy = 155 mm
Clear cover to any reinforcement d' = 30.00 mm Effective depth provided dpr = 165.00 mm Greater than 'min eff depth reqd' Hence Ok Min reinforcement AsMin = 240.00 mm2 Limiting Moment Mulim = 90.52 kNm
1.5 Deflection check:
R/F provided at midspan along short direction = 448.80 mm2 % pt = 0.27 %
Stress in Rebar fs =0.58*fy*Ast (req) / Ast (pro) = 163.581 N/mm2 Modification factor (MF) = 2.0 As per Fig 4 of IS:456-2000 Type of slab for deflection check = Simply supported Basic span to effective depth ratio (l/d)basic = 20 As per Cl. No. 23.2.1 of IS:456-2000 (L/d)max = (l/d)basic x MF = 40.00 (Lx/dpr)actual = 36.0606 (l / d)max > (l / d)actual Safe in Deflection' Hence Ok
1.6 Check for Shear:
Shear Force at the support Vu = (Wu*L/2) = 37.9313 kN/m
Nominal Shear Stress τv = Vu / (bdpr) = 0.22989 N/mm2 Concrete Shear Strength τc = 0.37834 From Table 19, IS:456-2000 k = 1.2 (Clause:40.2.1.1, IS:456-2000) k τc = 0.454 N/mm2 τv < k τc, No Need of Shear Reinforcement DEVELOPMENT OF MAA SAMLESWARI AT SAMBALPUR DESIGN OF SLAB - PILGRIM FACILITY TWO WAY SLAB 1 1.1 DESIGN OF SLAB SLAB S7
Short span Lx = 5.95 m
Long span Ly = 7.10 m Assumed slab thickness D = 0.200 m Grade of concrete Fck = 25 N/mm2 Grade of reinforcement Fe = 500 N/mm2 SLAB S7 Clear cover to any reinforcement d' = 30 mm
1.2 Type of panel:
1.3 Loading: 7.10 m
Self weight of slab W1 = 5.00 kN/m 2
Roof finish W2 = 2.40 kN/m2 Live load W3 = 1.10 kN/m2 Miscellaneous (MEP) W4 = 0.00 kN/m2 Design Load with load factor of 1.5, Wu = 12.75 kN/m 2 5.95 m
Ratio of long span to short span, R = 1.2 Two Way Slab
1.4 Design:
Coeff BM Ast - (mm2) Dia Spacing (mm)
Short span direction % pt Table 26 (kNm/m) Req Prov (mm) Req Prov Negative moment at continuous edge 0 0.00 240.00 448.80 0.27 10 327 175 Positive moment at midspan 0.059 26.63 389.63 628.32 0.38 10 202 125
Ast - (mm2) Dia Spacing (mm)
Long span direction Coeff BM (kNm) % pt Req Prov (mm) Req Prov Negative moment at continuous edge 0.057 25.73 402.71 448.80 0.29 10 195 175 Positive moment at midspan 0.043 19.41 299.59 448.80 0.29 10 262 175
Min effective depth reqd dre = 87.86 mm dx = 165 dy = 155 mm
Clear cover to any reinforcement d' = 30.00 mm Effective depth provided dpr = 165.00 mm Greater than 'min eff depth reqd' Hence Ok Min reinforcement AsMin = 240.00 mm2 Limiting Moment Mulim = 90.52 kNm
1.5 Deflection check:
R/F provided at midspan along short direction = 628.32 mm2 % pt = 0.38 %
Stress in Rebar fs =0.58*fy*Ast (req) / Ast (pro) = 179.833 N/mm2 Modification factor (MF) = 1.8 As per Fig 4 of IS:456-2000 Type of slab for deflection check = Simply supported Basic span to effective depth ratio (l/d)basic = 20 As per Cl. No. 23.2.1 of IS:456-2000 (L/d)max = (l/d)basic x MF = 36.90 (Lx/dpr)actual = 36.0606 (l / d)max > (l / d)actual Safe in Deflection' Hence Ok
1.6 Check for Shear:
Shear Force at the support Vu = (Wu*L/2) = 37.9313 kN/m
Nominal Shear Stress τv = Vu / (bdpr) = 0.22989 N/mm2 Concrete Shear Strength τc = 0.43668 From Table 19, IS:456-2000 k = 1.2 (Clause:40.2.1.1, IS:456-2000) k τc = 0.52402 N/mm2 τv < k τc, No Need of Shear Reinforcement DEVELOPMENT OF MAA SAMLESWARI AT SAMBALPUR DESIGN OF SLAB - PILGRIM FACILITY TWO WAY SLAB 1 1.1 DESIGN OF SLAB SLAB S8
Short span Lx = 5.50 m
Long span Ly = 5.50 m Assumed slab thickness D = 0.200 m Grade of concrete Fck = 25 N/mm2 Grade of reinforcement Fe = 500 N/mm2 SLAB S8 Clear cover to any reinforcement d' = 30 mm
1.2 Type of panel:
1.3 Loading: 5.50 m
Self weight of slab W1 = 5.00 kN/m2
Roof finish W2 = 2.40 kN/m2 Live load W3 = 1.10 kN/m2 Miscellaneous (MEP) W4 = 5.00 kN/m2 Design Load with load factor of 1.5, Wu = 20.25 kN/m2 5.50 m
Ratio of long span to short span, R = 1 Two Way Slab
1.4 Design:
Coeff BM Ast - (mm2) Dia Spacing (mm)
Short span direction % pt Table 26 (kNm/m) Req Prov (mm) Req Prov Negative moment at continuous edge 0 0.00 240.00 335.10 0.20 8 209 150 Positive moment at midspan 0.056 34.30 506.16 904.78 0.55 12 223 125
Ast - (mm2) Dia Spacing (mm)
Long span direction Coeff BM (kNm) % pt Req Prov (mm) Req Prov Negative moment at continuous edge 0 0.00 240.00 335.10 0.22 8 209 150 Positive moment at midspan 0.056 34.30 560.39 904.78 0.60 12 202 125
Min effective depth reqd dre = 99.71 mm dx = 166 dy = 152 mm
Clear cover to any reinforcement d' = 30.00 mm Effective depth provided dpr = 166.00 mm Greater than 'min eff depth reqd' Hence Ok Min reinforcement AsMin = 240.00 mm2 Limiting Moment Mulim = 91.62 kNm
1.5 Deflection check:
R/F provided at midspan along short direction = 904.78 mm2 % pt = 0.55 %
2 Stress in Rebar fs =0.58*fy*Ast (req) / Ast (pro) = 162.233 N/mm Modification factor (MF) = 1.7 As per Fig 4 of IS:456-2000 Type of slab for deflection check = Simply supported Basic span to effective depth ratio (l/d)basic = 20 As per Cl. No. 23.2.1 of IS:456-2000 (L/d)max = (l/d)basic x MF = 34.33 (Lx/dpr)actual = 33.1325 (l / d)max > (l / d)actual Safe in Deflection' Hence Ok
1.6 Check for Shear:
Shear Force at the support Vu = (Wu*L/2) = 55.6875 kN/m
Nominal Shear Stress τv = Vu / (bdpr) = 0.33547 N/mm2 Concrete Shear Strength τc = 0.50633 From Table 19, IS:456-2000 k = 1.2 (Clause:40.2.1.1, IS:456-2000) k τc = 0.6076 N/mm2 τv < k τc, No Need of Shear Reinforcement