Professional Documents
Culture Documents
STANDARDS
5.1 The analysis and design shall be carried out in accordance with the codes of practice of
Bureau of Indian Standards and sound engineering practice. (Refer Table-2)
DESIGN LOADING
Dead loads shall be generally determined in accordance with IS875 (Part I).Dead load will be
calculated using STAAD with appropriate density of material.
6.1.1 The self-weight of the various elements are computed based on the unit weight of
materials as given below:-
(TABLE 1)
Materials Unit weight kN / m3 Reference
Steel 78.50
Plain Cement Concrete 24.00 IS 875-Part 1,pg-7
(rounded on higher side)
Reinforced Cement Concrete 25.00 IS 875-Part 1,pg-8
(rounded on higher side)
Brick work 22.00 IS 875-Part 1,pg-10
(rounded on higher side)
Aluminum 2.6 IS 875-Part 1,pg-28
(rounded on higher side
Cement plaster 20.40 IS 875-Part 1,pg-16
Soil 21 Geotechnical report
5|Page
6.2 IMPOSED LOADS
Imposed loads shall be in general as per IS 875 (Part 2). Following imposed loads shall be
considered:
6|Page