Professional Documents
Culture Documents
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Finish review
State Finished
Marks 19.00/20.00
Question 2 Is it acceptable to hand the tool on aircraft component during maintenance work?
/
Question 3 Is ULB of CVR and SSFDR interchangeable?
Question 5 What do you have to pay attention when perform Xload Nav Database?
Question 6 What do you if you find Valve cap of bleeding port on brake missing?
/
Question 8 What should you do during towing if LDG safety device without red flag?
Question 9 What should you do if you open fan cowl and reverser cowl?
Question 10 What should you do when you get the tool from store?
Question 11 What should you do when you perform measurement to check serviceable of AC?
Question 12 What should you have to pay attention when performing functional test air data
system?
Correct
Select one:
Mark 1.00 out of
1.00 a. Remove all probe covers.
b. Install all probe covers.
c. Perform aircraft precaution refer to AMM
/
Question 13 What will you do during transit check if you find paint peel off on radom but already
applied tape?
Correct
Select one:
Mark 1.00 out of
1.00 a. No need to do anything because this is already assessment.
b. Refer AMM to access defect
c. Check technical log if the defect was assessed and recorded properly.
Question 15 Which check list you can use during transit, daily check?
Question 16 Which check list you can use during weekly check?
/
Question 18 Which following is correct related to transit check?
Question 19 Which following should you do when apply MEL 25-50-04 for cargo restraint
component such as net, attachment point, stanchions?
Correct
Select one:
Mark 1.00 out of
1.00 a. Dispatch AC without any ops limitation
b. Inform MCC for ops limitation refer to weight and balance manual
c. Related cargo consider inoperative.
Question 20 Which following should you pay attention during GVI belling faring panel?
Finish review