Professional Documents
Culture Documents
SESSION 4
Dimension and leader
In AutoCAD you can add a dimension in your drawings after you have
completed draw any objects that you want. In this topic, we are going
to learn the basic part of dimension. The picture below is the example
properties.
Page 1 of 11
How to change the settings of the dimension?
Before adding dimension to your drawings you will need to specify the
Page 2 of 11
Then click on “manage dimension style”.
Page 3 of 11
You can change the type of arrows and symbols.
Page 4 of 11
Change the primary units.
Page 5 of 11
How to add dimension?
As usual we need to specify our first point of the object and the
Page 6 of 11
After selecting the points of the object you can drag your mouse
Page 7 of 11
Types of dimension
Page 8 of 11
2. Aligned - measurement inside the object
Page 9 of 11
4. Radius – measure the radius of a circle or fillet.
Page 10 of 11
2. Leader
Leader are lines pointing to objects with a text. We can use leader
to label our object. You can add leader by clicking the icon on the
Page 11 of 11