Professional Documents
Culture Documents
All standards used for calibration/verification are traceable to National Institute of Standards and Technology (N.I.S.T.) or other international/national standards. Its
calibration is carried out by either an ISO/IEC 17025: 2005 accredited calibration laboratory, or have been derived from accepted values/physical constants, or have
been derived by ratio/documented calibration techniques. All calibration performed are in compliance with SIGS Operating Procedures Manual, OPM Tier - II (ISO
9001: 2008)
This certified that the above mentioned measuring / test ( with the above mentioned serial number ) has been calibrated and is found to be acceptable for use in
measurement / verification of product dimensions to verify product conformance to drawings / specifications / customer requirements and national / international
standards / specs.
page 1 / 1