Professional Documents
Culture Documents
142857
Section 6 ULS CHECKS (Construction Load) (U+U Girder 28m) Area 140
Jacking Load 0.765
6.1 Shear No of Strands 111
INPUT DATA
fck = 50 Mpa :Characterstic Compressive strength of Concrete
fyv = 415 Mpa :Characterstic strength of Stirrups/links reinforcement (IRS- Cl 16.4.4.4.1)
ft = 1.70 Mpa :Maximum Principle Tensile Stress at the Centroidal axis (IRS- Cl 16.4.4.2)
Dist. From
Dist. From Dist. from Dist. from Normal Force
COG of
Width of C.O.G of Tensile Fiber Comp. Fiber Dist. from Comp. Fiber due to PT
Net Width Depth Inertia Section to
Section web Section to to Centroid of to Centroid to Longitudinal bar after all
b (m) H (m) I (m4) COG of
B(m) Tensile Tendon of Tendon dt (m) Losses N
Tendons
Fiber yt (m) e (m) d (m) (KN)
e0 (m)
Section 1 - 1 1.40 1.18 1.05 0.17 0.43 0.400 0.65 0.03 0.99 16999
Section 2 - 2 1.35 1.13 1.59 0.59 0.65 0.318 1.27 0.33 1.53 16999
b=Net Width of web after deduction of size of duct as per cl. 16.4.4.2 of IRS-CBC
1 of 4
CALCULATION OF SHEAR AND TORSION REINFORCEMENT
SHEAR CHECK
Compare V &
Sections Section UnCracked in Flexure Section Cracked in Flexure CHECK
Vc
Section 1 - 1 1.70 11.90 4.80 4001 6181 0 3500 216341625 4001 YES
Section 2 - 2 1.70 8.21 4.10 4950 14735 0 3855 568025816 4950 YES
2 of 4
6.2 Torsion
T-section shall be divided into component rectangles for purpose of torsional design. This shall be done insuch a way as to maximise function ∑(hmaxh3min),
where hmax and hmin are the larger and smaller dimensions of each components of rectangle.
Section 1 - 1 1.40 1.05 1.40 1.05 875 793 1.37 0.42 YES 1.14 114
Section 2 - 2 1.35 1.59 1.59 1.35 1438 1376 1.33 0.42 YES 1.31 131
Section 1 - 1 1.30 0.51 1.30 0.51 875 82 0.57 0.42 YES 0.31 30.9
Section 2 - 2 1.35 0.51 1.35 0.51 1438 62 0.41 0.42 NO 0.22 22.1
3 of 4
6.3 Combined Shear & Torsion.
COMBINED SHEAR & TORSION -WEB
This Check is carried out as per Provisions of IRS : CBC , CLAUSE 16.4.5.2
CASE-1 MAX. TORSION CORRESPONDING SHEAR
Sections V T v =V/(bd) vt v + vt vtu CHECK
2 2 2 2
KN KN-m N / mm N / mm N / mm N / mm
Section 1 - 1 3500 793 3.8 1.37 5.22 5.30 OK
Section 2 - 2 3855 1376 2.2 1.33 3.57 5.30 OK
4 of 4