Professional Documents
Culture Documents
SCOPE OF APPLICATION : Provisions of this checklist apply to any inspector, BV employee and non-exclusive personnel, engaged in inspections
delivered by Bureau Veritas acting as second-party body performing inspections on behalf of its Client (ref. standard ISO/IEC 17000). This document is
for guideline purpose only and line with the 2nd party inspection provisions of ref. standard ISO/IEC 17000 where client or standard requirements differs
from the content of this Bureau Veritas checklist, then client/standard requirements will take precedence.
Project : Date :
RFI No.:
Cable Size:
Note:
(1) The acceptance of various parameters as above shall be as per relevant instructions & approval from client
(2) Check points shall be updated as per contractually agreed requirements with client / relevant applicable standard requirements
Page 1 of 2
PU_PV_TI_CL_002_007_Cabl
INSPECTION CHECKLIST / TEST FORMAT e IR Test & Hi-Pot Test _Rev
0.0
Page 2 of 2