Energypac Engineering Ltd. conducted a primary current injection test of an 11kV feeder CT at the 33/11kV substation in Mirsharai, Chittagong. The test injected 50A of primary current into the CT, which has a ratio of 200/5, and measured the secondary currents. The test results showed that the secondary currents measured across all three phases were within the expected 1.25A range, indicating the CT is functioning properly.
Energypac Engineering Ltd. conducted a primary current injection test of an 11kV feeder CT at the 33/11kV substation in Mirsharai, Chittagong. The test injected 50A of primary current into the CT, which has a ratio of 200/5, and measured the secondary currents. The test results showed that the secondary currents measured across all three phases were within the expected 1.25A range, indicating the CT is functioning properly.
Energypac Engineering Ltd. conducted a primary current injection test of an 11kV feeder CT at the 33/11kV substation in Mirsharai, Chittagong. The test injected 50A of primary current into the CT, which has a ratio of 200/5, and measured the secondary currents. The test results showed that the secondary currents measured across all three phases were within the expected 1.25A range, indicating the CT is functioning properly.