Professional Documents
Culture Documents
150-ft tall pole with 40-ft x 80-ft flag and November 14, 2016
footing
Utah McNeil Engineering assumes responsibility only for the
items addressed herein and does not assume responsibility for
the remainder of the structure. No site observations are
Prepared by: Cody Palmer, P.E. scheduled to verify the understanding of the contractor or the
proper installation of the items addressed.
16628
230442
McNEIL ENGINEERING STRUCTURAL, L.C.
A PART OF THE MCNEIL GROUP, P.C.
8610 SOUTH SANDY PARKWAY, SUITE 200
SANDY, UTAH 84070
(801) 255-7700 FAX: (801) 255-8071
PROJECT INFORMATION:
Project Name: 150-ft tall pole with 40-ft x 80-ft flag
Project Location: Utah
DESIGN CRITERIA:
Governing Building Code: IBC 2015
Type of Constuction: Steel pipe and concrete footing
Wind (3-second gust): 115 mph, Exposure C
Risk Category: II
CONSTRUCTION MATERIALS:
Concrete 28 day Strength
Footings: 4500 psi
Steel:
Pipe: ASTM A36 (Fy = 36 ksi, min)
SOILS CRITERIA:
Bearing Pressures Lateral and soil bearing pressures per IBC 2015
NOTES:
These calculations are for the design of an approximately 150-ft tall steel pole supporting an
approximately 40-ft x 80-ft flexible flag
In accordance with IBC section 101.3, the purpose of the structural design requirements, including earthquake requirements, contained herein is
primarily to safeguard against major structural failures and loss of life, not to limit damage or maintain function.
McNEIL ENGINEERING - STRUCTURAL, L.C.
McNEIL ENGINEERING - CIVIL, L.C.
McNEIL ENGINEERING - SURVEYING, L.C.
8610 S. Sandy Parkway, Ste. 200 * Sandy, Utah 84070 * Tel 801-255-7700 * 801-255-8071
McNEIL ENGINEERING - CONSULTANTS, L.C.
www.mcneileng.com
Nov-16
P 12250 lbs
Company : Mc Neil E ngineering Nov 15, 2016
Des igner : CRP 9:20 AM
Job Number : Checked B y:_____
Model Name : 150'-0 Flag P ole
R IS A-3D Version 14.0.2 [C :\...\...\Desktop\Calcs\145 ft- flag pole total (15-ft embed).r3d] P age 1
Company : Mc Neil E ngineering Nov 15, 2016
Des igner : CRP 9:20 AM
Job Number : Checked B y:_____
Model Name : 150'-0 Flag P ole
B as ic Load C ases
B LC Description Category X Gra... Y Gra... Z G rav... Joint P oint Distrib... Area(Member) S urface(Plate/...
1 P O LE DE AD LO AD DL -1
2 WIND F LAG None 1 1
3 WIND P O LE WL 5
4 F LAG DE AD LOAD None 1
Load C ombinations
Des cription S olve P Delta S RS S B ... Fa... B LC Fa...B ... Fa...B ... Fa...B ... Fa...B ... Fa...B ... Fa...B ... Fa...B ... Fa...B ... Fa...
1 IBC 16-12 (N... Yes Y DL 1 WL 1
2 IBC 16-12 (W ... Yes Y DL 1 WL .6 2 .6 4 1
R IS A-3D Version 14.0.2 [C :\...\...\Desktop\Calcs\145 ft- flag pole total (15-ft embed).r3d] P age 3
Company : Mc Neil E ngineering Nov 15, 2016
Des igner : CRP 9:20 AM
Job Number : Checked B y:_____
Model Name : 150'-0 Flag P ole
R IS A-3D Version 14.0.2 [C :\...\...\Desktop\Calcs\145 ft- flag pole total (15-ft embed).r3d] P age 7
Company : Mc Neil E ngineering Nov 15, 2016
Des igner : CRP 9:20 AM
Job Number : Checked B y:_____
Model Name : 150'-0 Flag P ole
R IS A-3D Version 14.0.2 [C :\...\...\Desktop\Calcs\145 ft- flag pole total (15-ft embed).r3d] P age 12
Non-constrained Pier Design
IBC 2015 and ASCE 7-10
per Sections 1805.7.2.1 and 1805.7.2.3
Nov-16
Design Parameters
Pier/Footing Requirements
Side area of pier provided based on lateral pressure Alateral 1.33 ft2
Depth of embedment required (lateral bearing) dREQ'D 11.94 ft per Eq. 18-1
Equations Used
1
4 .36 h 2
d REQ ' D = 0 .5 A 1 + 1 + A
P
A lateral = 2 .34
S1b