Professional Documents
Culture Documents
(Lead) charges
for trucks and (Lead) charges for (Lead)
(Lead) charges for (Lead) charges for (Lead)
tippers for trucks and tippers charges for
trucks and tippers trucks and tippers for charges for
per cu.meter for trucks and
for Earth / Sand Rubble/Size stones/ Cement/ Steel/ trucks and
Sl No. Distance PCC slabs/ tippers per
/Gravel / Murrum/ Cut Stones/ Coarse RCC poles/ AC tippers for
Shahabad slabs/ cu.meter for
Lime/ Surki/ per aggregate per & GI sheets/ Bricks
CC & Laterite water/ 1000
/1000 nos
cu.meter cu.meter Packed litres
blocks/ Wood/ cum
materials/tonne
1 2 3 4 5 6 7 8
7 for Every km beyond 30 km 10000 9.40 9.40 5.90 13.90 5.90 15.20
18 Full body porcelain wall tiles of size 300 x 600 mm 14 BMT-C.24 554.00 1 Sqm
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
23 Medium teak wood planks of any thickness 18 BMT - E.04 142391.00 1 cum
25 Best teak wood planks of any thickness 18 BMT - E.08 154257.00 1 cum
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
58 MS powder coated door stopper 24 BMT-G.53 45.00 1 No.
76 Zinc Chromate Yellow Oxide Iron Primer paint 39 BMT-J.04 175.00 1 Ltr
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
93 Synthetic enamel paint Grade - I 40 BMT-J.29 248.00 1 Ltr
Wall putty of White Cement or Polymer or Cement
94 39 BMT-J.31 550.00 20 Kgs
based
95 Exterior Texture 41 BMT-J.32 818.00 25 Kgs
102 Gypsom board plain sheets 12.5mm thick 47 BMT-M.03 210.00 1 sqm
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
Mineral Fibre Ceiling Tile of 0.595m x 0.595m of 15
128 48 BMT-M.84 416.00 1 sqm
mm thick Fissura Fine Model
ii) Centre fixed both side openable shutters 77 BMT - P.06,07 5411.00 1 sqm
ii) Centre fixed both side openable shutters(5'x4') 79 BMT - P.24 6625.00 1 sqm
iii) Centre fixed both side openable shutters(6'x4') 79 BMT - P.25 5797.00 1 sqm
Pre painted steel sliding window 2-Track with Two
137 83 BMT-P.26 6166.00 1 sqm
sliding shutters.
Pre painted steel sliding window 3-Track with Three
138 92 BMT-P.77 6818.00 1 sqm
sliding shutters.
Supply and fixing of UPVC sliding windows 2 track
139 88 BMT - P.80.A 6038.00 1 sqm
sliding (Area of window up to 1.75 sqm).
Supply and fixing of UPVC sliding windows 2 track
140 sliding (Area of window above 1.75 sqm up to 2.50 88 BMT - P.80.C 6220.00 1 sqm
sqm).
Supply and fixing of UPVC sliding windows 3 track
141 88 BMT - P.80.B 8058.00 1 sqm
sliding (Area of window upto 1.75 sqm).
142 Supply and fixing of UPVC casement windows 87 BMT - P.78.A 6283.00 1 sqm
145 Pre painted steel/ powder coate Structural Glazing 93 BMT - Q.01 6625.00 1 sqm
146 Top Hung shutters in Structural Glazing 93 BMT - Q.02 5355.00 1 sqm
147 ..
Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) and 2'-
a) 94 BMT - Q.03&04 5466.00 1 sqm
0" x 3'-0" (609.6x914.4mm)
Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm), 3'-0" x
b) 94 BMT - Q.05&06 4295.00 1 sqm
4'-0" (914.4x1219.2mm)
148 Dismantling
a) Stone masonry in cement mortar 94 BMT-S.01 390.00 1 cum
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
Pan tiled or Mangalore tiled roof with out roof
c) 94 BMT-S.04 120.00 10 sqm
timbers :
d) Wrought and framed timber in roofs or floors 94 BMT-S.06 206.00 1 cum
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
171 G.I scam bolts & nuts 103 BMS-W.62 5.00 1 No.
172 8mm dia GI 'j' bolts & nuts 104 BMS-W.64 9.00 1 No.
174 Limpet washers (for scam & ‘J’ bolts) 104 BMS-W.66 2.00 1 No.
160 Power Saw cutter - Hand Operated - Hire Charges 106 BMC-X.02 102.00 1 hour
159 Power Drill - Hand Operated - Hire Charges 106 BMC-X.03 95.00 1 hour
Reference
Material hire Labour
160 Hire charges for Access Scaffolding to SSR Unit
charges charges
page
A) Brick Masonry / Stone Maasonry
B) Plastering to walls
Ceiling Plastering
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
d) 4th floor 2.46 35.90 1 Sqm
162 HIRE CHARGES FOR CENTERING&SCAFFOLDING-centering using Steel scaffolding pipes , jack props , wallers , Foot plates , b
plates etc.,
163 HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported height of 3.66M - for Steel scaffolding pipes, jack Props, Ste
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights
of every 610 mm height above 3.66 M, may be allowed at 16.666% more than the basic material hire charges and relevant
labour charges of the applicable floor and item
164 HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported height of 3.66M - Casurina Ballies , Bamboos , Wooden Re
Posts , Wall Plates etc.,
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
g) RCC vertical walls of plane surface (Labour PH SoR -
charges 2018-19) page 10 (31
b 4-a) 1000.00 1653.00 1818.00 1984.00 2149.00
Common SoR
LABOUR CHARGES
SKILLED
166
Bar bender 6 I-1 625.00 1 Each 600.00
167
Blacksmith 6 I-2 495.00 1 Each 475.00
168
Blaster 6 I-3 570.00 1 Each 550.00
169
Carpenter 6 I-4 580.00 1 Each 550.00
170
Work Inspector(Non technical) 6 I -10 520.00 1 Each 500.00
171
Mason / Brick layer 6 I -11 500.00 1 Each 475.00
172
Operator concrete mixer 6 I -16 510.00 1 Each 490.00
173 Operator Jackhammer / Pneumatic tamper (skilled)
6 I - 23 510.00 1 Each 490.00
174
Painter 7 I - 35 580.00 1 Each 550.00
175
Plumber / Pipe fitter 7 I - 36 580.00 1 Each 550.00
SEMI SKILLED
175
Sprayer(semi skilled) 7 II - 1 460.00 1 Each 440.00
176
Carpenter 7 II - 4 460.00 1 Each 440.00
177
Plumber / Pipe fitter 7 II - 9 460.00 1 Each 440.00
177
Mason / Brick layer 8 II - 35 460.00 1 Each 440.00
178
Painter 8 II - 37 460.00 1 Each 440.00
UN SKILLED
179
Man Mazdoor / Woman Mazdoor 8,9 III - 3, 4 420.00 1 Each 400.00
Cost of Materials :
180
Binding wire 11 3 55.00 1 Kg 53.00
181
Detonator electric 12 21 9.00 1 No. 9.00
182
Sand (un-screened for concrete items) 12 27(a) 510.00 1 Cum 100.00
183
Sand (unscreened) for filling 12 27(b) 375.00 1 Cum 100.00
184
Sand(screened for mortar, plastering items) 12 28 590.00 1 Cum 182.00
185 Impervious Water proof compound 14 80 67.00 1 Kg 64.00
186
Gravel / Quarry spall 26 M - 008 113.00 1 Cum 110.00
187 Coarse graded Granular sub-base Material 2.36
mm & below (SoR 2018-19) 28 M - 022 420.00 1 Cum 420.00
188 Coarse graded Granular sub-base Material 9.5 mm
to 4.75mm 28 M - 025 565.00 1 Cum 538.00
189
Aggregates 6mm nominal size (HBG) 29 M - 050 725.00 1 Cum 703.00
190
Aggregates 10mm nominal size (HBG) 29 M - 051 920.00 1 Cum 894.00
Common SoR 2019-20 - Page : 20
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
191
Aggregates 13.20 / 12.50mm nominal size (HBG) 29 M - 052 1080.00 1 Cum 1048.00
192
Aggregates 20mm nominal size (HBG) 29 M - 053 1340.00 1 Cum 1303.00
193
Aggregates 40mm nominal size (HBG) 29 M - 055 830.00 1 Cum 808.00
194
Gelatin 80% 32 M - 104 59.00 1 Kg 57.00
195
Water charges(Urban) 37 M - 189(a) 107.00 1 KL 103.00
196
Water charges(Rural) 37 M - 189(b) 80.00 1 KL 77.00
197
PVC pipes 110mm dia.(4.00Kgs/sq.cm) 67 PH Items Table 20 162.00 1 RM 162.00
Common SoR
198 Reference Hire &
to SoR Crew
Machinery Charges Fuel
charges
charges
a) Transit mixer 2 cum
45 1 1705.20 1 hour 321.40
b)
Air compressor 7 cmm ( diesel) 45 3 1080.00 1 hour 242.10
c)
Batching plant 0.50 cum (6 cum/hour) 45 9 222.90 1 hour 387.40
d)
Batching plant 2x1.00 cum(15 cum/hour) 45 10 719.70 1 hour 387.40
e) Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity
45 16 142.20 1 hour 252.20
f)
Jack hammer 46 39 16.50 1 hour 378.30
g)
Needle vibrator 40mm( petrol) 46 40 27.60 1 hour 181.50
i)
Shovel 0.85 cum 110hp 46 52 2493.40 1 hour 267.80
j) Lift charges of materials(Winch 35HP- Electric)
47 66 315.90 1 hour 302.60
k) Concrete placer pump (25 cum/hr)(Electric)
47 70 1345.10 1 hour 189.20
199 Seigniorage charges G.O.Ms.No.100 of Industries and Commerce (M.I) Dept. dt.31.10.2015
i)
Coarse aggregate , stone 75.00 1 cum
ii)
Earth , Gravel 30.00 1 cum
ii)
Sand for mortar & filling 50.00 1 cum
iv)
Bricks 60.00 1000 Nos.
v)
Polished Shahabad/Tandur stone slbs 8.00 1 sqm
vi)
Black Kadapa slabs 8.00 1 sqm
vii)
Granite 51.00 1 sqm
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
208 Tractor with grader @ 25cum per hour
27 13 423.60 1 Hour
Common SoR 2019-20 - Page : 22
Reference
S.No./ Item Code
S.No Items to SoR Rate Unit
No.
page
Non SSR items
1
Glass strips in Granolithic concrete flooring 10.00 1 sqm
2 Stainless steel base Plate 75mm dia.(in SS
staircase railing) 80.00 1 No.
3 Stainless steel base Plate 25mm dia.(in SS ramp
railing) 30.00 1 No.
4
Anchor bars in SS railing 30.00 1 No.
5
Bonding anchor bars in SS railing 15.00 1 No.
6
Teak wood beading 12mm x 12mm 26.00 1 RM
7
Teak wood beading 18mm x 12mm 34.00 1 RM
8
250mm long brass butt hinges 500.00 1 No.
9
Al. round handles 150mm dia. 100.00 1 No.
10 Labour charges including cost of nails, making
holes to wall and in aluminium sheet for expansion
joint 25.00 1 No.
11
MS Powder coated handles 100mm long 25.00 1 No.
12
Cup board locks 100.00 1 No.
13
Al. lock with handle 75.00 1 No.
WS & SA SoR 2019-20
12 76.20mm (3") CI Nahany trap 1st quality 122 BMW-C.41,42 288.00 50.00 1 Each
13 Orissa pan 580mmx440mm - ISI marked 122 BMW-D.04,06 1399.00 377.00 1 Each
Sl. SoR
ITEM Item code Rate Labour Unit
No. Page No.
24 Angle stop cock 12.70mm heavy duty 126 BMW-E.05,06 408.00 43.00 1 Each
25 12.70mm NP bib tap heavy duty 126 BMW-E.07,08 349.00 29.00 1 Each
26 12.70mm NP bib tap heavy duty 126 BMW-E.09,10 223.00 29.00 1 Each
27 S&F 31.75mm brass plumber union 126 BMW-E.11,12 61.00 14.00 1 Each
28 12.7mm dia. NP push cock 126 BMW-E.29 234.00 1 Each
29 GM peet valves
a) 15mm NB 127 BMW-F.21,22 545.00 44.00 1 Each
b) 20mm NB 127 BMW-F.19,20 733.00 44.00 1 Each
c) 25mm NB 127 BMW-F.17,18 1051.00 44.00 1 Each
d) 32mm NB 128 BMW-F.23,24 1594.00 39.00 1 Each
e) 40mm NB 128 BMW-F.25,26 2155.00 67.00 1 Each
f) 50mm NB 128 BMW-F.27,28 3155.00 90.00 1 Each
g) 65mm NB 128 BMW-F.29,30 4868.00 112.00 1 Each
h) 80mm NB 128 BMW-F.31,32 7211.00 133.00 1 Each
S& F Nominal Bore GI pipe Medium
30
Grade properties & weight
a) 15mm Nominal bore 130 BMW-F.79,80 179.00 41.00 1 RM
b) 20mm Nominal bore 130 BMW-F.81,82 198.00 41.00 1 RM
c) 25mm Nominal bore 130 BMW-F.83,84 258.00 41.00 1 RM
d) 32mm Nominal bore 130 BMW-F.85,86 359.00 41.00 1 RM
e) 40mm Nominal bore 130 BMW-F.87,88 401.00 44.00 1 RM
f) 50mm Nominal bore 130 BMW-F.89,90 436.00 67.00 1 RM
65mm Tata or Zenith make or
31 130 BMW-F.91 755.00 1 RM
equivalent.
S & F 12.70 x 152.00 mm NP shower BMW-
32 130 161.00 20.00 1 Each
rose heavy F.100,101
Sl. SoR
ITEM Item code Rate Labour Unit
No. Page No.
August, 2019
2 Fe - 500 / Fe - 500 D 37000.00
5 MS Flats 41000.00
D Allowances
1 Add for MA @ 25% 0.25
2 Overheads&Contractors Profit @13.615% 0.13615
Water charges
Type of Habitation 2 1 for Rural
2 for Urban
NAME OF THE WORK: CONSTRUCTION OF 200 BEDDED SUPER SPECIALITY HOSPITAL WITH KIDNEY RESEARCH CENTRE
& DIALYSIS UNIT AT PALASA VILLAGE IN SRIKAKULAM DISTRICT.
LEAD CHART (COMMON SoR 2019-2020) (Cement - June, 2019 & Steel - Aug, 2019 rates)
Initial
Reference
S.No./ Cost Convey- MA
Sl. Source of to SSR Lead in Unloading
Description Item Unit excluding ance Total
No. Materials page KM charges
Code No. seigniorage Charges
number
charges 25%
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
Ordinary Portland Cement 43 / 53
1 1 MT 3900.00 3900.00
grade
2 Reinforcement steel Fe- 500 1 MT 37000.00 37000.00
3 Mild steel bars 1 MT 43000.00 43000.00
4 Structural steel 1 MT 40000.00 40000.00
5 MS flats 1 MT 41000.00 41000.00
6 Sand (un-screened) Anguru 12 27(a) 1 Cum 70.00 510.00 620.96 1130.96
7 Sand (unscreened) for filling Anguru 12 27(b) 1 Cum 70.00 375.00 620.96 995.96
8 Sand (screened for plastering items) Anguru 12 28 1 Cum 70.00 590.00 620.96 1210.96
(Part II)
KM 224/2 of
17 Rough Stone (OTG) Roads & 1 1 Cum 7.00 171.45 62.06 233.51
NH5
Bridges
(Part II)
KM 224/2 of
18 Rough Stone (HBG) Roads & 12 1 Cum 7.00 250.00 62.06 312.06
NH5
Bridges
19 Gravel / Quarry spall Local 26 M - 008 1 Cum 5.00 113.00 41.37 154.37
D A T A ( SoR 2019-20)
NAME OF THE WORK: CONSTRUCTION OF 200 BEDDED SUPER SPECIALITY HOSPITAL WITH KIDNEY
RESEARCH CENTRE & DIALYSIS UNIT AT PALASA VILLAGE IN SRIKAKULAM DISTRICT.
CEMENT MORTAR PER CUM CM (1:2) CM (1:3) CM (1:4) CM (1:5) CM (1:6) CM (1:8)
Cost of Sand for Plastering ( 1.05 cum ) 1271.51 1271.51 1271.51 1271.51 1271.51 1271.51
DATA
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
1 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental,
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete
for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-2)
Ordinary Soil - Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 240.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 420.00 1 No. 3494.40
Add for MA @ 25% 0.25 3494.40 873.60
b) Machinery
Shovel 0.85 cum 110hp 6.00 hours 2493.40 1 Hour 14960.40
Crew charges 6.00 hours 267.80 1 Hour 1606.80
Add MA on crew charges 0.25 1606.80 401.70
21336.90
c&d)
Overheads&Contractors Profit @13.615% 0.13615 21336.90 2905.02
Cost for 240 cum ( a+b+c+d) 24241.92
Rate per 1 cum (a+b+c+d) / 240 101.01
Say 101
2 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and 3m to 6m depth including all operational,incidental,
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete
for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-3)
Ordinary Soil - Mechanical Means up to 3m to 6m depth
Unit : 1 cum
Taking output : 210.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 420.00 1 No. 3494.40
Add for MA @ 25% 0.25 3494.40 873.60
b) Machinery
Shovel 0.85 cum 110hp 6.00 hours 2493.40 1 Hour 14960.40
Crew charges 6.00 hours 267.80 1 Hour 1606.80
Add MA on crew charges 0.25 1606.80 401.70
21336.90
c&d)
Overheads&Contractors Profit @13.615% 0.13615 21336.90 2905.02
Cost for 210 cum ( a+b+c+d) 24241.92
Rate per 1 cum (a+b+c+d) / 210 115.44
Rate per 1 cum Say 115
CIVIL DATA 2019-20 : Page-24
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
3 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring
blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS
308)
(BLKD-CSTN-2-5)
Ordinary rock(not requiring blasting)- Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 180.00 cum
a) Labour
Mazdoor ( Unskilled) 6.24 Nos. 420.00 1 No. 2620.80
Add for MA @ 25% 0.25 2620.80 655.20
b) Machinery
Shovel 0.85 cum 110hp 6.00 hours 2493.40 1 Hour 14960.40
Crew charges 6.00 hours 267.80 1 Hour 1606.80
Add MA on crew charges 0.25 1606.80 401.70
20244.90
c&d)
Overheads&Contractors Profit @13.615% 0.13615 20244.90 2756.34
Cost for 180 cum ( a+b+c+d) 23001.24
Rate per 1 cum (a+b+c+d) / 180 127.78
Rate per 1 cum Say 128
4 Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on
bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-7)
Hard rock (blasting prohibited)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 420.00 1 No. 2184.00
Add for MA @ 25% 0.25 2184.00 546.00
b) Machinery
Air compressor 6.00 Hours 1080.00 1 Hour 6480.00
Jack hammer/Pneumatic braker 12.00 Hours 16.50 1 Hour 198.00
Crew charges
Air compressor 6.00 Hours 242.10 1 Hour 1452.60
Jack hammer/Pneumatic braker 12.00 Hours 378.30 1 Hour 4539.60
Add MA on crew charges 0.25 5992.20 1498.05
16898.25
c&d)
Overheads&Contractors Profit @13.615% 0.13615 16898.25 2300.70
Cost for 10 cum ( a+b+c+d) 19198.95
Rate per 1 cum (a+b+c+d) / 10 1919.89
Rate per 1 cum Say 1920
5 Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of T
& P, labour charges etc., and overheads & contractors profit complete for finished item of work.
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
6 Pre construction Anti termite treatment is a process in which chemical toxic to subterrean tremites is apply/
inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and
around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB
RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels
terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water
and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the
colums, plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0
Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth)
& @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns &
300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall &
rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding, overheads and
contractor profit etc. complete for furnished item of work as per the approval of the Engineer-in-charge
Unit : 1 sqm
Rate as per SoR 1 sqm 150.00 1 sqm 150.00
Overheads&Contractors Profit 0.13615 150.00 20.42
@13.615%
Rate per 1 sqm 170.42
170
7 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of
foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including
cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P
etc., and overheads & contractors profit complete for fnished item of work (APSS NO.309&310)
(BLD-CSTN-2-9) & & Addendum dt.14.05.2019 of the Chief Engineer (R&B) Buildings
Unit : 1 cum
Taking output : 6.00 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 420.00 1 No. 130.20
Add for MA @ 25% 0.25 130.20 32.55
162.75
Add for water @ 1% 0.01 162.75 1.63
Rate per 6 cum (a+b+c) 164.38
Overheads&Contractors Profit 0.13615 164.38 22.38
@13.615% 186.76
Rate per 1 cum 31.13
Say 31
8 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse
aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate,
water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete
in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)
(BLD-CSTN-3-5)
Unit : 1 cum
A.MATERIALS :
Cement 162.00 Kgs 3900.00 1000 Kgs 631.80
Coarse aggregate 40mm 0.90 Cum 892.06 1 Cum 802.85
Fine aggregate ( Sand ) 0.45 Cum 1130.96 1 Cum 508.93
Water (including curing) 1.20 kl 107.00 1 kl 128.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 142.20 1 hour 142.20
Crew charges 1.00 hour 252.20 1 hour 252.20
Add MA on crew charges 0.25 252.20 63.05
CIVIL DATA 2019-20 : Page-26
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
C.LABOUR :
1st class mason 0.10 Nos. 500.00 1 Each 50.00
Mazdoor (unskilled) 1.39 Nos. 420.00 1 Each 583.80
Add for MA @ 25% 0.25 633.80 158.45
Rate per 1 cum 3321.69
Overheads&Contractors Profit 0.13615 3321.69 452.25
@13.615%
Rate per 1 cum 3773.93
Say 3774
9 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using
concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement,
sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of
concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top
surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work.
(APSS No. 402)
(BLD-CSTN-3-7)
Unit : 1 cum
A.MATERIALS :
Cement 129.60 Kgs 3900.00 1000 Kgs 505.44
Coarse aggregate 40mm 0.90 Cum 892.06 1 Cum 802.85
Fine aggregate ( Sand ) 0.45 Cum 1130.96 1 Cum 508.93
Water (including curing) 1.20 kl 107.00 1 kl 128.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity 1.00 hour 142.20 1 hour 142.20
Crew charges 1.00 hour 252.20 1 hour 252.20
Add MA on crew charges 0.25 252.20 63.05
C.LABOUR :
1st class mason 0.10 Nos. 500.00 1 Each 50.00
Mazdoor (unskilled) 1.39 Nos. 420.00 1 Each 583.80
Add for MA @ 25% 0.25 633.80 158.45
Rate per 1 cum 3195.33
Overheads&Contractors Profit 0.13615 3195.33 435.04
@13.615%
Rate per 1 cum 3630.37
Say 3630
CIVIL DATA 2019-20 : Page-27
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
10 Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum
cement content of 400 kgs per 1 cum of concrete using batching and mixing plant of 15 cum per hour
capacity with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like
cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding
pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using transit mixer, lifting concrete mechnically, laying
concrete using concrete pump, vibrating, curing etc., and overheads & contractors profit complete but
excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
(BLD-CSTN-3-14)
FOUNDATIONS , PLINTH , PEDESTALS ( Below Plinth)
A.MATERIALS :
Cement 400.00 Kgs 3900.00 1000 Kgs 1560.00
20mm HBG graded metal 0.80 Cum 1238.57 1 Cum 990.86
Sand 0.40 Cum 1130.96 1 Cum 452.38
B.LABOUR :
1st class Mason 0.056 Nos 500.00 1 Each 28.00
2nd class Mason 0.056 Nos 460.00 1 Each 25.76
Mazdoor (both men&women) 0.917 Nos 420.00 1 Each 385.14
Add for MA @ 25% 0.25 438.90 109.73
C.MACHINERY :
Batching plant 15cum per hour capacity
0.222 hours 719.70 1 hour 159.77
Crew charges 0.222 hours 387.40 1 hour 86.00
Transit mixer 0.222 hours 1705.20 1 hour 378.55
Crew charges 0.222 hours 321.40 1 hour 71.35
Concrete pump 0.222 hours 1345.10 1 hour 298.61
Crew charges 0.222 hours 189.20 1 hour 42.00
Needle vibrator 40mm ( petrol ) 0.222 hours 27.60 1 hour 6.13
Crew charges 0.222 hours 181.50 1 hour 40.29
Add MA on crew charges 0.25 467.50 116.87
Water(including for curing) 1.20 kl 107.00 1 kl 128.40
Rate per 1 cum 4879.86
a Footings
Rate for Design mix M 30 1.00 Cum 4879.86 1 Cum 4879.86
Hire charges of centering and scaffolding 1.00 Cum 288.00 1 Cum 288.00
Labour charges 1.00 Cum 631.00 1 Cum 631.00
Add for MA @ 25% 0.25 631.00 157.75
5956.61
Overheads&Contractors Profit 0.13615 5956.61 810.99
@13.615%
Rate per 1 cum 6767.60
Say 6768
b Column pedestals
Rate for Design mix M 30 1.00 Cum 4879.86 1 Cum 4879.86
Hire charges of centering and scaffolding 1.00 Cum 328.00 1 Cum 328.00
Labour charges 1.00 Cum 1004.00 1 Cum 1004.00
Add for MA @ 25% 0.25 1004.00 251.00
6462.86
Overheads&Contractors Profit 0.13615 6462.86 879.92
@13.615%
Rate per 1 cum 7342.77
Say 7343
CIVIL DATA 2019-20 : Page-28
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
c Plinth Beams /Tie beam
Rate for Design mix M 30 1.00 Cum 4879.86 1 Cum 4879.86
Hire charges of centering and scaffolding 1.00 Cum 695.00 1 Cum 695.00
Labour charges 1.00 Cum 760.50 1 Cum 760.50
Add for MA @ 25% 0.25 760.50 190.13
6525.48
Overheads&Contractors Profit 0.13615 6525.48 888.44
@13.615%
Rate per 1 cum 7413.92
Say 7414
d Base slab for Sump / Septic tank :
Rate for Design mix M 30 1.00 Cum 4879.86 1 Cum 4879.86
Hire charges of centering and scaffolding 1.00 Cum 64.00 1 Cum 64.00
Labour charges 1.00 Cum 341.00 1 Cum 341.00
Add for MA @ 25% 0.25 341.00 85.25
5370.11
Overheads&Contractors Profit 0.13615 5370.11 731.14
@13.615%
Rate per 1 cum 6101.24
Say 6101
a Haunh Concrete
Rate for Design mix M 30 1.00 Cum 4879.86 1 Cum 4879.86
Labour charges 1.00 Cum 631.00 1 Cum 631.00
Add for MA @ 25% 0.25 631.00 157.75
5668.61
Overheads&Contractors Profit 0.13615 5668.61 771.78
@13.615%
Rate per 1 cum 6440.39
Say 6440
11 Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum
cement content of 400 kgs per 1 cum of concrete using batching and mixing plant of 15 cum per hour
capacity with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like
cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies,
bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and
labour charges ,transporting concrete using transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and
its fabrication charges for finished item of work (APSS No. 402)
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 400.00 Kgs 3900.00 1000 Kgs 1560.00
20mm HBG graded metal 0.80 Cum 1238.57 1 Cum 990.86
Sand 0.40 Cum 1130.96 1 Cum 452.38
B.LABOUR :
1st class Mason 0.111 Nos 500.00 1 Each 55.50
2nd class Mason 0.222 Nos 460.00 1 Each 102.12
Mazdoor (both men&women) 1.56 Nos 420.00 1 Each 653.52
Add for MA @ 25% 0.25 811.14 202.79
C.MACHINERY :
Batching plant 15cum per hour capacity
0.444 hours 719.70 1 hour 319.55
Crew charges 0.444 hours 387.40 1 hour 172.01
Transit mixer 0.444 hours 1705.20 1 hour 757.11
Crew charges 0.444 hours 321.40 1 hour 142.70
Concrete pump 0.444 hours 1345.10 1 hour 597.22
Crew charges 0.444 hours 189.20 1 hour 84.00
Needle vibrator 40mm ( petrol ) 0.444 hours 27.60 1 hour 12.25
CIVIL DATA 2019-20 : Page-29
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Crew charges 0.444 hours 181.50 1 hour 80.59
Add MA on crew charges 0.25 214.19 53.55
Water(including for curing) 1.20 kl 107.00 1 kl 128.40
Rate per 1 cum 6364.55
CIVIL DATA 2019-20 : Page-30
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
a) COLUMNS :
un supported height up to 3.66 m
Rate for other Floors Cellar/FF SF TF 4F 5F 6F
Rate as above 6364.55 6364.55 6364.55 6364.55 6364.55 6364.55
Hire charges of centering and scaffolding 238.00 238.00 238.00 238.00 238.00 238.00
Labour charges 1757.00 1933.00 2108.00 2284.00 2460.00 2636.00
Add for MA @ 25% 439.25 483.25 527.00 571.00 615.00 659.00
Lift charges of materials(Winch 35HP-
Electric) 0.00 421.09 463.20 505.31 547.42 589.53
Crew charges 0.00 403.37 443.70 484.04 524.38 564.71
Add for MA @ 25% 0.00 100.84 110.93 121.01 131.09 141.18
Rate per 1 cum 8798.80 9944.10 10255.38 10567.91 10880.43 11192.97
Overheads&Contractors Profit 1197.96 1353.89 1396.27 1438.82 1481.37 1523.92
@13.615%
Rate per 1 cum 9996.76 11297.99 11651.65 12006.73 12361.80 12716.89
Say 9997 11298 11652 12007 12362 12717
b) LINTELS :
Rate for other Floors Cellar/FF SF TF 4F 5F 6F
Rate as above 6364.55 6364.55 6364.55 6364.55 6364.55 6364.55
Hire charges of centering and scaffolding 790.00 790.00 790.00 790.00 790.00 790.00
Labour charges 1251.00 1376.00 1501.00 1626.00 1751.00 1877.00
Add for MA @ 25% 312.75 344.00 375.25 406.50 437.75 469.25
Lift charges of materials(Winch 35HP-
Electric) 0.00 421.09 463.20 505.31 547.42 589.53
Crew charges 0.00 403.37 443.70 484.04 524.38 564.71
Add for MA @ 25% 0.00 100.84 110.93 121.01 131.09 141.18
Rate per 1 cum 8718.30 9799.85 10048.63 10297.41 10546.18 10796.22
Overheads&Contractors Profit 1187.00 1334.25 1368.12 1401.99 1435.86 1469.91
@13.615%
Rate per 1 cum 9905.30 11134.10 11416.75 11699.40 11982.04 12266.13
Say 9905 11134 11417 11699 11982 12266
C) SIDE WALLS
i) 100mm thick side walls
Cost of M 30 design mix 0.10 cum 6364.55 1.00 cum 636.45
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
C) SIDE WALLS
i) 150mm thick side walls
Cost of M 30 design mix 0.15 cum 6364.55 1.00 cum 954.68
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Overheads&Contractors Profit 807.41
@13.615%
Rate per 1 sqm 6737.71
Say 6738
12 Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum
cement content of 400 kgs per 1 cum of concrete using batching and mixing plant of 15 cum per hour
capacity with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like
cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding
pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational,
incidental and labour charges ,transporting concrete using transit mixer, lifting concrete mechnically, laying
concrete using concrete pump, vibrating, curing , overheads & contractors profit etc., complete but excluding
cost of steel and its fabrication charges for finished item of work (APSS No. 402)
a) COLUMNS :
un supported height up to 4.27 m
Rate for other Floors Cellar SF TF 4F 5F 6F
Rate as above 6364.55 6364.55 6364.55 6364.55 6364.55 6364.55
Hire charges of centering and scaffolding 355.00 355.00 355.00 355.00 355.00 355.00
Extra staging (Hire) 59.16 59.16 59.16 59.16 59.16 59.16
Labour charges 2268.00 2495.00 2722.00 2948.00 3175.00 3175.00
Extra staging (Labour) 377.98 415.82 453.65 491.31 529.15 529.15
Add for MA @ 25% 94.50 103.96 113.41 122.83 132.29 132.29
Lift charges of materials(Winch 35HP-
Electric) 0.00 421.09 463.20 505.31 547.42 547.42
Crew charges 0.00 403.37 443.70 484.04 524.38 524.38
Add for MA @ 25% 0.00 100.84 110.93 121.01 131.09 131.09
Rate per 1 cum 9519.18 10718.78 11085.60 11451.21 11818.03 11818.03
Overheads&Contractors Profit 1296.04 1459.36 1509.31 1559.08 1609.02 1609.02
@13.615%
Rate per 1 cum 10815.22 12178.14 12594.91 13010.29 13427.05 13427.05
Say 10815 12178 12595 13010 13427 13427
13 Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum
cement content of 400 kgs per 1 cum of concrete using batching and mixing plant of 15 cum per hour
capacity with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like
cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies,
bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and
labour charges ,transporting concrete using transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and
its fabrication charges for finished item of work (APSS No. 402)
(BLD-CSTN-3-16)
RCC SLABS , BEAMS :
A.MATERIALS :
Cement 400.00 Kgs 3900.00 1000 Kgs 1560.00
20mm HBG graded metal 0.80 Cum 1238.57 1 Cum 990.86
Sand 0.40 Cum 1130.96 1 Cum 452.38
B.LABOUR :
1st class Mason 0.033 Nos 500.00 1 Each 16.50
2nd class Mason 0.067 Nos 460.00 1 Each 30.82
Mazdoor (both men&women) 0.433 Nos 420.00 1 Each 181.86
Add for MA @ 25% 0.25 229.18 57.30
C.MACHINERY :
Batching plant 15cum per hour capacity
0.133 hours 719.70 1 hour 95.94
Crew charges 0.133 hours 387.40 1 hour 51.64
Transit mixer 0.133 hours 1705.20 1 hour 227.30
CIVIL DATA 2019-20 : Page-33
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Crew charges 0.133 hours 321.40 1 hour 42.84
Concrete pump 0.133 hours 1345.10 1 hour 179.30
Crew charges 0.133 hours 189.20 1 hour 25.22
Needle vibrator 40mm ( petrol ) 0.133 hours 27.60 1 hour 3.68
Crew charges 0.133 hours 181.50 1 hour 24.19
Add MA on crew charges 0.25 99.01 24.75
Water(including for curing) 1.20 kl 107.00 1 kl 128.40
Rate per 1 cum 4092.99
A) BEAMS :
un supported height up to 3.66 m
Rate for other Floors Cellar SF TF 4F 5F 6F
Rate as above 4092.99 4092.99 4092.99 4092.99 4092.99 4092.99
Hire charges of centering and scaffolding 1395.00 1395.00 1395.00 1395.00 1395.00 1395.00
Labour , lift charges for scaffolding 1473.00 1620.00 1768.00 1915.00 2062.00 2210.00
0 368.25 405.00 442.00 478.75 515.50 552.50
Lift charges of materials(Winch 35HP-
Electric) 0.00 84.35 92.78 101.21 109.65 118.08
Crew charges 80.79 88.87 96.95 105.03 113.11
Add for MA @ 25% 0.00 20.20 22.22 24.24 26.26 28.28
Rate for 1 cum 7329.24 7698.32 7901.86 8104.14 8306.43 8509.96
Overheads&Contractors Profit 997.88 1048.13 1075.84 1103.38 1130.92 1158.63
@13.615%
Rate per 1 cum 8327.12 8746.45 8977.70 9207.52 9437.35 9668.59
Say 8327 8746 8978 9208 9437 9669
B) RCC SLABS :
a) Roof Slabs 125mm thick :
un supported height up to 3.66 m
Rate for Design mix M 30 0.125 Cum 4092.99 1 Cum 511.62
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Add for MA @ 25% 0.00 3.03 3.33 3.64 3.94 4.24
Rate per 1 sqm 980.70 1029.75 1052.53 1076.56 1100.59 1124.62
Overheads&Contractors Profit 133.52 140.2 143.3 146.57 149.85 153.12
@13.615%
Rate per 1 sqm 1114.22 1169.95 1195.83 1223.13 1250.44 1277.74
Say 1114 1170 1196 1223 1250 1278
CIVIL DATA 2019-20 : Page-35
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
d) Roof Slabs 175mm thick :
Rate for Design mix M 30 0.175 Cum 4092.99 1 Cum 716.27
14 Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum
cement content of 400 kgs per 1 cum of concrete using batching and mixing plant of 15 cum per hour
capacity with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like
cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding
pipes , jack props , wallers , foot plates , brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using transit mixer, lifting concrete mechnically, laying
concrete using concrete pump, vibrating, curing , overheads & contractors profit etc., complete but excluding
cost of steel and its fabrication charges for finished item of work (APSS No. 402)
A) BEAMS :
un supported height up to 4.27 m
Rate for other Floors Cellar SF TF 4F 5F 6F
Rate as above 4092.99 4092.99 4092.99 4092.99 4092.99 4092.99
Hire charges of centering and scaffolding
2085.00 2085.00 2085.00 2085.00 2085.00 2085.00
Extra staging (Hire) 347.49 347.49 347.49 347.49 347.49 347.49
Labour , lift charges for scaffolding 1903.00 2093.00 2284.00 2474.00 2664.00 2664.00
Extra staging (Labour) 317.15 348.82 380.65 412.32 443.98 443.98
Add for MA @ 25% 79.29 87.21 95.16 103.08 111.00 111.00
Lift charges of materials(Winch 35HP-
Electric) 0.00 84.35 92.78 101.21 109.65 109.65
Crew charges 80.79 88.87 96.95 105.03 105.03
Add for MA @ 25% 0.00 20.20 22.22 24.24 26.26 26.26
Rate for 1 cum 8824.91 9239.84 9489.16 9737.28 9985.39 9985.39
Overheads&Contractors Profit 1201.51 1258 1291.95 1325.73 1359.51 1359.51
@13.615%
Rate per 1 cum 10026.42 10497.84 10781.11 11063.01 11344.90 11344.90
Say 10026 10498 10781 11063 11345 11345
CIVIL DATA 2019-20 : Page-36
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
b) Roof Slabs 125mm thick :
un supported height up to 4.27 m
Rate for Design mix M 30 0.125 Cum 4092.99 1 Cum 511.62
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Overheads&Contractors Profit 172.64 180.68 184.74 188.96 193.02 193.46
@13.615%
Rate per 1 sqm 1440.66 1507.72 1541.60 1576.85 1610.74 1614.43
Say 1441 1508 1542 1577 1611 1614
15 Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum
cement content of 400 kgs per 1 cum of concrete using batching and mixing plant of 15 cum per hour
capacity with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970
and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement,
fine aggregate (sand), coarse aggregate, water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for 60cm wide sun-shades 7.5cm thick at fixed
end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and
labour charges , transporting concrete using transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, curing, overheads & contractors profit complete etc., but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402, 403 & 903)
(BLD-CSTN-3-16)
A.MATERIALS :
Cement 400.00 Kgs 3900.00 1000 Kgs 1560.00
20mm HBG graded metal 0.80 Cum 1238.57 1 Cum 990.86
Sand 0.40 Cum 1130.96 1 Cum 452.38
B.LABOUR :
1st class Mason 0.033 Nos 500.00 1 Each 16.50
2nd class Mason 0.067 Nos 460.00 1 Each 30.82
Mazdoor (both men&women) 0.433 Nos 420.00 1 Each 181.86
Add for MA @ 25% 0.25 229.18 57.30
C.MACHINERY :
Batching plant 15cum per hour capacity
0.133 hours 719.70 1 hour 95.94
Crew charges 0.133 hours 387.40 1 hour 51.64
Transit mixer 0.133 hours 1705.20 1 hour 227.30
Crew charges 0.133 hours 321.40 1 hour 42.84
Concrete pump 0.133 hours 1345.10 1 hour 179.30
Crew charges 0.133 hours 189.20 1 hour 25.22
Add MA on crew charges 0.25 74.82 18.71
Water(including for curing) 1.20 kl 107.00 1 kl 128.40
Rate per 1 cum 4059.06
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
16 Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Sand) using common
burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms
from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all
materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 501 & 504).
(BLD-CSTN-5-5)
Unit : 1cum
A.MATERIALS :
Cement 36.00 Kgs 3900.00 1000 Kgs 140.40
Common burnt clay bricks 23x11x7cms 512 Nos 6143.47 1000 Nos 3145.46
Fine aggregate ( Sand ) 0.20 cu.m. 1210.96 1 cu.m. 242.19
B.LABOUR :
1st class mason 0.24 Nos. 500.00 1 Each 120.00
2nd class mason 0.56 Nos. 460.00 1 Each 257.60
Mazdoor (Unskilled) 1.89 Nos. 420.00 1 Each 793.80
Add for MA @ 25% 0.25 1171.40 292.85
water charges @ 1% 0.01 4992.30 49.92
Rate per 1 cum 5042.22
a Up to basement
Rate as worked out above 1.00 Cum 5042.22 1 Cum 5042.22
Overheads&Contractors Profit 0.13615 5042.22 686.50
@13.615%
Rate per 1 cum 5728.72
Say 5729
b) Superstructure :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 5042.22 5042.22 5042.22 5042.22 5042.22 5042.22
Hire charges for Access Scaffolding 44.87 44.87 44.87 44.87 44.87 44.87
Labour charges for scaffolding 345.48 494.70 643.87 793.09 942.26 1091.43
Add for MA @ 25% 86.37 123.68 160.97 198.27 235.57 272.86
Lift charges ( Page 131 of Std. Data ) 0.00 117.14 234.28 351.42 468.56 585.70
Add for MA @ 25% 0.00 29.29 58.57 87.86 117.14 146.43
Rate per 1 cum 5518.94 5851.89 6184.78 6517.73 6850.62 7183.50
Overheads&Contractors Profit 751.4 796.73 842.06 887.39 932.71 978.03
@13.615%
Rate per 1 cum 6270.34 6648.62 7026.84 7405.12 7783.33 8161.53
Say 6270 6649 7027 7405 7783 8162
CIVIL DATA 2019-20 : Page-39
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
17 Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using
common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x
11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of
6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main
brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks,
water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but
excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509)
(BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Common burnt clay bricks 23x11x7cms 565 Nos. 6143.47 1000 Nos. 3471.06
Cement 79.20 Kgs 3900.00 1000 Kgs 308.88
Fine aggregate ( Sand ) 0.22 cu.m. 1210.96 1 cu.m. 266.41
B.LABOUR :
1st class mason 0.60 Nos. 500.00 1 Each 300.00
2nd class mason 0.60 Nos. 460.00 1 Each 276.00
Mazdoor (Unskilled) 2.75 Nos. 420.00 1 Each 1155.00
Add for MA @ 25% 0.25 1731.00 432.75
water charges @ 1% 0.01 6210.10 62.10
Rate per 10 sqm 6272.20
Rate per 1 sqm 627.22
18 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete
Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine
aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for
bed blocks & hold fasts for finished item of work. (APSS No. 402)
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
1st class mason 0.10 Nos. 500.00 1 Each 50.00
Mazdoor (Unskilled) 1.39 Nos. 420.00 1 Each 583.80
Add for MA @ 25% 0.25 633.80 158.45
Rate per 1 cum 3859.75
19 Plain Cement Concrete M 20 nominal mix using 20mm size graded machine crushed hard granite metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete
Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine
aggregate(sand), coarse aggregate, water etc. to site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for steps for finished item of work. (APSS No. 402)
(BLD-CSTN-3-11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1238.57 1 Cum 1114.71
Sand 0.45 Cum 1130.96 1 Cum 508.93
Cement 330.00 Kgs 3900.00 1000 Kgs 1287.00
Water ( including for curing ) 1.20 Kl 107.00 1 Kl 128.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 142.20 1 hour 142.20
Crew Charges 1.00 hour 252.20 1 hour 252.20
Add MA on crew charges 0.25 252.20 63.05
Needle vibrator 40mm ( petrol ) 1.00 hours 27.60 1 hour 27.60
Crew charges 1.00 hours 181.50 1 hour 181.50
Add MA on crew charges 0.25 181.50 45.38
C.LABOUR :
1st class mason 0.100 Nos. 500.00 1 Each 50.00
Mazdoor (Unskilled) 1.390 Nos. 420.00 1 Each 583.80
Add for MA @ 25% 0.25 633.80 158.45
Rate per 1 cum 4543.22
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
20 Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching, machine
mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors
profit complete for finished item of work (APSS No. 402 & 403) for sill slabs.
(BLD-CSTN-3-13 - A)
A.MATERIALS :
Cement 330.00 Kgs 3900.00 1000 Kgs 1287.00
12mm HBG graded metal 0.90 Cum 1039.06 1 Cum 935.15
Sand 0.45 Cum 1130.96 1 Cum 508.93
B.LABOUR :
1st class Mason 0.133 Nos 500.00 1 Each 66.50
2nd class Mason 0.267 Nos 460.00 1 Each 122.82
Mazdoor (both Men & Women) 3.60 Nos 420.00 1 Each 1512.00
Add for MA @ 25% 0.25 1701.32 425.33
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 142.20 1 hour 142.20
Crew Charges 1.00 hour 252.20 1 hour 252.20
Add MA on crew charges 0.25 252.20 63.05
Water(including for curing) 1.20 kl 107.00 1 kl 128.40
Basic cost per 1 cum 5443.59
(BLD-CSTN-3-13 C)
A.MATERIALS :
Cement 330.00 Kgs 3900.00 1000 Kgs 1287.00
12mm HBG graded metal 0.90 Cum 1039.06 1 Cum 935.15
Sand 0.45 Cum 1130.96 1 Cum 508.93
B.LABOUR :
1st class Mason 0.067 Nos 500.00 1 Each 33.50
2nd class Mason 0.133 Nos 460.00 1 Each 61.18
Mazdoor (both men&women) 2.500 Nos 420.00 1 Each 1050.00
Add for MA @ 25% 0.25 1144.68 286.17
C.MACHINERY :
CIVIL DATA 2019-20 : Page-42
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 142.20 1 hour 142.20
Crew Charges 1.00 hour 252.20 1 hour 252.20
Add MA on crew charges 0.25 252.20 63.05
Water(including for curing) 1.20 kl 107.00 1 kl 128.40
Basic cost per 1 cum 4747.79
22 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different
diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and
shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with
binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including
cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges
such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for
finished item of work.( APSS No.126)
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
b) Labour for cutting , bending , shifting to
site , tying and placing in position
1st class Blacksmith / Barbender 3.00 Nos. 625.00 1 Each 1875.00
2nd class Blacksmith / Barbender 7.00 Nos. 495.00 1 Each 3465.00
Mazdoor(Unskilled) 10.00 Nos. 420.00 1 Each 4200.00
Add for MA @ 25% 0.25 9540.00 2385.00
51105.00
CIVIL DATA 2019-20 : Page-44
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
23 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour
charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks
of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of
binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in
position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)
24 Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and
conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on
materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-
in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Rate per 10 sqm 2732.18
Rate per 1 sqm 273.22
CIVIL DATA 2019-20 : Page-46
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Rate for other Floors Cellar/FF SF TF 4F 5F 6F
Rate as worked out above 273.22 273.22 273.22 273.22 273.22 273.22
Hire charges for Access Scaffolding 2.46 2.46 2.46 2.46 2.46 2.46
Labour charges for scaffolding 15.91 22.57 29.23 35.90 42.56 49.22
Add for MA @ 25% 3.98 5.64 7.31 8.98 10.64 12.31
Lift charges ( Page 131 of Std. Data ) 0.00 18.84 37.68 56.52 75.36 94.20
Add for MA @ 25% 0.00 4.71 9.42 14.13 18.84 23.55
Rate per 1 sqm 295.57 327.44 359.32 391.21 423.08 454.96
Overheads&Contractors Profit 40.24 44.58 48.92 53.26 57.60 61.94
@13.615%
Rate per 1 sqm 335.81 372.02 408.24 444.47 480.68 516.90
Say 336 372 408 444 481 517
25 Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top
coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all
labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work.
(SS 901,903 & 904)
( BLD-CSTN-8-10)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 3900.00 1000 Kgs 102.96
Fine aggregate (Sand) 0.11 Cum 1210.96 1 Cum 133.21
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 3900.00 1000 Kgs 56.16
Fine aggregate (Sand) 0.04 Cum 1210.96 1 Cum 48.44
B.LABOUR :
1st Class Mason 0.63 Nos. 500.00 1 Each 315.00
2nd Class Mason 1.47 Nos. 460.00 1 Each 676.20
Mazdoor (Unskilled) 3.90 Nos. 420.00 1 Each 1638.00
Add for MA @ 25% 0.25 2629.20 657.30
water charges @ 1% 0.01 3627.26 36.27
Rate per 10 sqm 3663.54
Rate per 1 sqm 366.35
Walls in superstructure :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 366.35 366.35 366.35 366.35 366.35 366.35
Hire charges for Access Scaffolding 1.03 1.03 1.03 1.03 1.03 1.03
Labour charges for scaffolding 7.95 11.38 14.81 18.24 21.67 25.10
Add for MA @ 25% 1.99 2.85 3.70 4.56 5.42 6.28
Lift charges ( Page 131 of Std. Data ) 0.00 26.29 52.58 78.88 105.17 131.46
Add for MA @ 25% 0.00 6.57 13.15 19.72 26.29 32.87
Rate per 1 sqm 377.32 414.47 451.62 488.78 525.93 563.09
Overheads&Contractors Profit 51.37 56.43 61.49 66.55 71.61 76.66
@13.615%
Rate per 1 sqm 428.69 470.90 513.11 555.33 597.54 639.75
Say 429 471 513 555 598 640
CIVIL DATA 2019-20 : Page-47
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
26 Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all
materials like cement, sand, water etc., to site and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc.,
and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)
a) for basement :
Rate per 1 sqm 1.00 sqm 273.22 1 sqm 273.22
Overheads&Contractors Profit 0.13615 273.22 37.20
@13.615%
Rate per 1 sqm 310.42
Say 310
b) Walls in superstructure :
Rate for other Floors Cellar/FF SF TF 4F 5F 6F
Rate as worked out above 273.22 273.22 273.22 273.22 273.22 273.22
Hire charges for Access Scaffolding 1.03 1.03 1.03 1.03 1.03 1.03
Labour charges for scaffolding 7.95 11.38 14.81 18.24 21.67 25.10
Add for MA @ 25% 1.99 2.85 3.70 4.56 5.42 6.28
Lift charges ( Page 131 of Std. Data ) 0.00 18.84 37.68 56.52 75.36 94.20
Add for MA @ 25% 0.00 4.71 9.42 14.13 18.84 23.55
Rate per 1 sqm 284.19 312.03 339.86 367.70 395.54 423.38
Overheads&Contractors Profit 38.69 42.48 46.27 50.06 53.85 57.64
@13.615%
Rate per 1 sqm 322.88 354.51 386.13 417.76 449.39 481.02
Say 323 355 386 418 449 481
CIVIL DATA 2019-20 : Page-48
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
27 Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top
coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all
labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS
901,903 & 904)
(BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick
Cement 43.20 Kgs 3900.00 1000 Kgs 168.48
Fine aggregate (Sand) 0.18 Cum 1210.96 1 Cum 217.97
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 3900.00 1000 Kgs 56.16
Fine aggregate (Sand) 0.04 Cum 1210.96 1 Cum 48.44
B.LABOUR :
1st Class Mason 0.63 Nos. 500.00 1 Each 315.00
2nd Class Mason 1.47 Nos. 460.00 1 Each 676.20
Mazdoor (Unskilled) 3.90 Nos. 420.00 1 Each 1638.00
Add for MA @ 25% 0.25 2629.20 657.30
water charges @ 1% 0.01 3777.55 37.78
Rate per 10 sqm 3815.33
Rate per 1 sqm 381.53
Walls in superstructure :
Rate for other Floors Cellar/FF SF TF 4F 5F 6F
Rate as worked out above 381.53 381.53 381.53 381.53 381.53 381.53
Hire charges for Access Scaffolding 1.03 1.03 1.03 1.03 1.03 1.03
Labour charges for scaffolding 7.95 11.38 14.81 18.24 21.67 25.10
Add for MA @ 25% 1.99 2.85 3.70 4.56 5.42 6.28
Lift charges ( Page 131 of Std. Data ) 0.00 26.29 52.58 78.88 105.17 131.46
Add for MA @ 25% 0.00 6.57 13.15 19.72 26.29 32.87
Rate per 1 sqm 392.50 429.65 466.80 503.96 541.11 578.27
Overheads&Contractors Profit 53.44 58.50 63.55 68.61 73.67 78.73
@13.615%
Rate per 1 sqm 445.94 488.15 530.35 572.57 614.78 657.00
Say 446 488 530 573 615 657
28 Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using
screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-
2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of
cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread
lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand,
water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar,
laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab
etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
(BLD-CSTN-10-25)
Unit : 10 sqm
A.MATERIALS :
Cement 100.80 Kgs 3900.00 1000 Kgs 393.12
Fine aggregate (Sand) 0.21 Cum 1210.96 1 Cum 254.30
Integral cement waterproofing liquid 0.40 Ltrs 190.00 1.00 Ltrs 76.00
B.LABOUR :
1st Class Mason 0.66 Nos. 500.00 1 Each 330.00
2nd Class Mason 1.54 Nos. 460.00 1 Each 708.40
Mazdoor (Unskilled) 3.70 Nos. 420.00 1 Each 1554.00
CIVIL DATA 2019-20 : Page-49
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Add for MA @ 25% 0.25 2592.40 648.10
water charges @ 1% 0.01 3963.92 39.64
Rate per 10 sqm 4003.56
29 Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom
slab,in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened
sand 12mm thick mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured
by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof
slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals
of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water
proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift
charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and
overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
30 Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof
coating to the bottom and sides of sunken slabs of toilets duly cleaning of the surface from dirt, dust and
other contaminations, providing and application of two coats of high performance Acrylic polymer modified
Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat ) including cost and conveyance of
all materials to site, operationals & incidental charges, lift charges etc., and overheads & contractors profit
complete for finished item of work
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Rate per Sqm say 433
31 RCM facia 50mm thick in CM(1:3) using screened sand for drop walls, fins with rabbit wire mesh & nomianl
reinforcement as directred by Engineer - In - Charge with dubara sponge finishing,including cost and
conveyance of all materials to site, operationals &incidental,cost and conveyance of cement, wire mesh water
to work site, centering, scaffolding and form work,lift charges etc., and overheads & contractors profit complete
for finished item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS
NO.403&903)
(BLD-CSTN-8-11)
Unit : 10 sqm
A)MATERIALS
Rabbit wire mesh 13.30 sqm 17.00 1 sqm 226.10
Cement for base coat and plastering 240.00 Kgs 3900.00 1000 Kgs 936.00
Cement for lumps 50.00 Kgs 3900.00 1000 Kgs 195.00
Fine aggregate (Sand) 0.50 cu.m. 1210.96 1 cu.m. 605.48
Excluding TMT steel/mild steel & binding
wire
B) LABOUR CHARGES
1st Class Mason 8.00 Nos. 500.00 1 Each 4000.00
Operator concrete mixer 1.00 Nos. 510.00 1 Each 510.00
Mazdoor (Unskilled) 10.00 Nos. 420.00 1 Each 4200.00
Add for MA @ 25% 0.25 8710.00 2177.50
C)Machinery :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 2.00 hours 142.20 1 hours 284.40
Crew charges 2.00 hours 252.20 1 hours 504.40
Add MA on crew charges 0.25 252.20 126.10
water charges @ 1% 0.01 13764.98 137.65
Rate per 10 sqm 13902.63
Rate per 1 sqm 1390.26
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
32 Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness
between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and
finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar
(1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement
slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full
depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water
and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (300mm x
300mm) 10.50 sqm 370.00 1 sqm 3885.00
Cement for CM(1:8) proportion for base
coat 21.60 Kgs 3900.00 1000 Kgs 84.24
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White Cement 2.00 Kgs 27.00 1 Kg 54.00
Sand for CM(1:8) 0.12 Cum 1210.96 1 Cum 145.32
B .LABOUR
Mason 1st class 0.96 Nos 500.00 1 Each 480.00
Mason 2nd class 2.24 Nos 460.00 1 Each 1030.40
Mazdoor(un skilled) 3.30 Nos 420.00 1 Each 1386.00
Add for MA @ 25% 0.25 2896.40 724.10
Add water charges 1% 0.01 7917.76 79.18
Rate for 10 sqm 7996.93
33 Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with
double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to
IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders
and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using
spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed
already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per
sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site
(excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar,
laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors
profit complete for finished item of work. (APSS No.701 & 707)
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8 to 10mm thick of size
600mm x 600mm 10.50 sqm 612.00 1 sqm 6426.00
Cement for CM(1:8)proportion for base
coat 21.60 Kgs 3900.00 1000 Kgs 84.24
CIVIL DATA 2019-20 : Page-52
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White Cement 6.00 Kgs 27.00 1 Kg 162.00
Sand for CM(1:8) 0.12 Cum 1210.96 1 Cum 145.32
CIVIL DATA 2019-20 : Page-53
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
B .LABOUR
Mason 1st class 0.96 Nos 500.00 1 Each 480.00
Mason 2nd class 2.24 Nos 460.00 1 Each 1030.40
Mazdoor(un skilled) 3.30 Nos 420.00 1 Each 1386.00
Add for MA @ 25% 0.25 2896.40 724.10
Add water charges 1% 0.01 10566.76 105.67
Rate for 10 sqm 10672.42
34 Flooring with 16 mm to 18 mm thick high polished granite stone slabs other than black and regular
colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and
design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base
coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab
including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with
white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads & contractors profit complete for finished item of
work (S.S.701 & special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs other than
black 16 to 18mm thick 10.50 sqm 2342.00 1 sqm 24591.00
Cement for CM(1:8) for base coat 36.00 Kgs 3900.00 1000 Kgs 140.40
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing 6.00 Kgs 27.00 1 Kg 162.00
Sand for CM(1:8) 0.20 Cum 1210.96 1 Cum 242.19
B .LABOUR
Mason 1st class 3.00 Nos 500.00 1 Each 1500.00
Mason 2nd class 1.00 Nos 460.00 1 Each 460.00
Mazdoor(un skilled) 8.00 Nos 420.00 1 Each 3360.00
Add for MA @ 25% 0.25 5320.00 1330.00
Add water charges 1% 0.01 31914.29 319.14
Rate for 10 sqm 32233.43
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
35 Flooring with 16 mm to 18 mm thick high polished granite stone slabs black colour as approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick
using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like
consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge , polishing
charges, cost of base coat and overheads & contractors profit complete for finished item of work for platforms
(S.S.701 & special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to
18mm thick 10.50 sqm 1991.00 1 sqm 20905.50
Cement for CM(1:8) for base coat 36.00 Kgs 3900.00 1000 Kgs 140.40
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing 6.00 Kgs 27.00 1 Kg 162.00
Sand for CM(1:8) 0.20 Cum 1210.96 1 Cum 242.19
B .LABOUR
Mason 1st class 3.00 Nos 500.00 1 Each 1500.00
Mason 2nd class 1.00 Nos 460.00 1 Each 460.00
Mazdoor(un skilled) 8.00 Nos 420.00 1 Each 3360.00
Add for MA @ 25% 0.25 5320.00 1330.00
Machine cutting charges 16.67 RM 17.00 1 RM 283.39
Half rounding the edges 16.67 RM 318.00 1 RM 5301.06
Add for MA @ 25% 0.25 2233.78 558.45
Add water charges 1% 0.01 34371.69 343.72
Rate for 10 sqm 34715.40
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
36 Providing window sills with 16 mm to 18 mm thick high polished granite stone slabs black colour as
approved by the Engineer-in-Charge set over base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid including neat grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth
including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and
all operational, incidental labour & lift charges, half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of work (S.S.701 & special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to
18mm thick 10.50 sqm 1991.00 1 sqm 20905.50
Cement for CM(1:8) for base coat 36.00 Kgs 3900.00 1000 Kgs 140.40
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing 6.00 Kgs 27.00 1 Kg 162.00
Sand for CM(1:8) 0.20 Cum 1210.96 1 Cum 242.19
B .LABOUR
Mason 1st class 3.00 Nos 500.00 1 Each 1500.00
Mason 2nd class 1.00 Nos 460.00 1 Each 460.00
Mazdoor(un skilled) 8.00 Nos 420.00 1 Each 3360.00
Add for MA @ 25% 0.25 5320.00 1330.00
Machine cutting charges 43.48 RM 17.00 1 RM 739.16
Half rounding the edges 43.48 RM 318.00 1 RM 13826.64
Add for MA @ 25% 0.25 5826.32 1456.58
Add water charges 1% 0.01 44251.17 442.51
Rate for 10 sqm 44693.68
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
37 Flooring with chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates,
cement, pigments of size 300mm x 300 mm and thickness 25 mm of any shades as approved by Engineer -
In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy
laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and
jointed with neat white cement to full depth mixed with pigment of matching shade including cost and
conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete
for finished item of work.
(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Chequred tiles 25mm thick 10.50 sqm 269.00 1 sqm 2824.50
Cement for CM(1:6) proportion for base
coat 28.80 Kgs 3900.00 1000 Kgs 112.32
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing & pointing 6.00 Kgs 27.00 1.00 Kgs 162.00
Sand for CM(1:6) proportion 0.12 Cum 1210.96 1 Cum 145.32
B. LABOUR
Mason 1st class 0.96 Nos. 500.00 1 Each 480.00
Mason 2nd class 2.24 Nos. 460.00 1 Each 1030.40
Mazdoor (unskiled) 3.30 Nos. 420.00 1 Each 1386.00
Add for MA @ 25% 0.25 2896.40 724.10
Add water charges 1% 0.01 6993.34 69.93
Rate per 10 sqm 7063.27
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
38 Providing 16 mm to 18 mm thick high polished leather finish granite stone slabs (steel grey or pearl
black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than
2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already
laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm
and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost
and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational,
incidental labour & lift charges, full rounding the edges of treads , polishing charges, cost of base coat and
overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special)
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Add water charges 1% 0.01 30266.53 302.67
Rate for 10 sqm 30569.19
CIVIL DATA 2019-20 : Page-59
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
39 Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain
vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any
colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over
base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at
the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit
complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-20)
Unit = 10 sqm
Cost of vitrified tiles 8-10mm thick 10.50 sqm 612.00 1 sqm 6426.00
Sand for CM(1:5) base coat 0.12 cum 1210.96 1 cum 145.32
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs 134.78
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing & pointing 2.00 Kgs 27.00 1 Kg 54.00
B.LABOUR
Mason 1st class 0.96 Nos. 500.00 1 Each 480.00
Mason 2nd class 2.24 Nos. 460.00 1 Each 1030.40
Mazdoor(unskilled) 3.30 Nos. 420.00 1 Each 1386.00
Add for MA @ 25% 0.25 2896.40 724.10
Add water charges 1% 0.01 10509.30 105.09
Rate for 10 sqm 10614.39
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
40 Providing skirting to internal walls 10 cm height with High Polished Granite 16 mm to 18 mm thick up
to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of
CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of
3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,
including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit
complete for finished item of work.
(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2342.00 1 sqm 24591.00
Sand for CM(1:5) base coat 0.12 cum 1210.96 1 cum 145.32
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs 134.78
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing & pointing 5.00 Kgs 27.00 1 Kg 135.00
Machine cutting charges 66.67 RM 17.00 1 RM 1133.39
Add for MA @ 25% 0.25 453.36 113.34
B.LABOUR
Mason 1st class 2.10 Nos. 500.00 1 Each 1050.00
Man Mazdoor(Beldar) 4.90 Nos. 420.00 1 Each 2058.00
Add for MA @ 25% 0.25 3108.00 777.00
Add water charges 1% 0.01 30266.53 302.67
Rate for 10 sqm 30569.19
41 Providing cladding to walls with High Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) other
than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing
with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2342.00 1 sqm 24591.00
Sand for CM(1:5) base coat 0.12 cum 1210.96 1 cum 145.32
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs 134.78
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing & pointing 5.00 Kgs 27.00 1 Kg 135.00
Machine cutting charges 66.67 RM 17.00 1 RM 1133.39
Add for MA @ 25% 0.25 453.36 113.34
B.LABOUR
Mason 1st class 2.10 Nos. 500.00 1 Each 1050.00
Man Mazdoor(Beldar) 4.90 Nos. 420.00 1 Each 2058.00
Add for MA @ 25% 0.25 3108.00 777.00
Add water charges 1% 0.01 30266.53 302.67
Rate for 10 sqm 30569.19
CIVIL DATA 2019-20 : Page-61
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
42 Providing dadooing with glazed red or white full body ceramic wall tiles of size 200mm x 300 mm / 245
mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and
overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of glazed coloured tiles 10.50 sqm 323.00 1 sqm 3391.50
Sand for CM(1:5) base coat 0.12 cum 1210.96 1 cum 145.32
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs 134.78
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing & pointing 6.00 Kgs 27.00 1 Kg 162.00
B.LABOUR
Mason 1st class 0.77 Nos. 500.00 1 Each 385.00
Mazdoor(unskilled) 0.80 Nos. 420.00 1 Each 336.00
Add for MA @ 25% 0.25 721.00 180.25
Add water charges 1% 0.01 4863.55 48.64
Rate for 10 sqm 4912.18
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
43 Providing dadooing with glazed full body porcelain wall tiles of size 300mm x 600 mm with any type of
design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and
thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs with borders and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand
with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc., and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-20)
Unit = 10 sqm
A.MATERIALS :
Cost of porcelain wall tiles 10.50 sqm 554.00 1 sqm 5817.00
Sand for CM(1:5) base coat 0.12 cum 1210.96 1 cum 145.32
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs 134.78
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs 128.70
White cement for jointing & pointing 2.00 Kgs 27.00 1 Kg 54.00
B.LABOUR
Mason 1st class 0.96 Nos. 500.00 1 Each 480.00
Mason 2nd class 2.24 Nos. 460.00 1 Each 1030.40
Mazdoor(unskilled) 3.30 Nos. 420.00 1 Each 1386.00
Add for MA @ 25% 0.25 2896.40 724.10
Add water charges 1% 0.01 9900.30 99.00
Rate for 10 sqm 9999.30
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Rate per 1 cum 728.42 731.50 734.58 737.66 740.74
Say 728 731 735 738 741
45 Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using 40mm
size (SS5) hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site including centering using
Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., shuttering, machine
mixing, laying concrete, lifting concrete manually , vibrating, curing, etc., and overheads & contractors profit
complete as per drawings but excluding cost of steel and it's fabrication charges for finished item of work
(APSS NO. 402 & 403) for dummy columns.
(BLDS-CSTN-3-13)
Unit: 1 Cum
A.MATERIALS :
Cement 129.60 Kgs 3900.00 1000 Kgs 505.44
40mm HBG metal 0.90 Cum 892.06 1 Cum 802.85
Sand 0.45 Cum 1130.96 1 Cum 508.93
B.LABOUR :
1st class Mason 0.167 Nos 500.00 1 Each 83.50
2nd class Mason 0.167 Nos 460.00 1 Each 76.82
Mazdoor (unskilled) 4.70 Nos 420.00 1 Each 1974.00
Add for MA @ 25% 0.25 2134.32 533.58
CIVIL DATA 2019-20 : Page-64
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 142.20 1 hour 142.20
Crew charges 1.00 hour 252.20 1 hour 252.20
Needle vibrator 40mm ( petrol ) 1.00 hour 27.60 1 hour 27.60
Crew charges 1.00 hour 181.50 1 hour 181.50
Add MA on crew charges 0.25 433.70 108.43
Water(including for curing) 1.20 kl 107.00 1 kl 128.40
Basic cost per 1 cum 5325.45
46 Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of
50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 1
No for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding,
drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the
railing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all
materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors
profit etc., complete for finished item of work.
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
47 Supplying and fixing of stainless steel (grade 304) railing for ramp as per approved drawing with top rail
of 50mm dia pipe and 2mm thick medium class fixed in to wall with 25mm dia pipe of 0.30m length @ 1m
centre to centre and welding, buffing, polishing all members of the railing thouroughly , lacquer finishing to
present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all
consumables, labour charges , overheads & contractors profit etc., complete for finished item of work.
48 Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5mm thick 4.0 kg/sq.cm
pressure of ISI marked including cost of necessary PVC Bends, shoes, iron / PVC clamps and all other
accessories and fixing in position including cost and conveyance of all materials, operational & incidental
charges including all labour charges for fixing at site etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 1328)
49 Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the Engineer-in-
Charge including cost and conveyance of materials to site and labour charges etc., overheads & contractors
profit complete for finished item of work.
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
50 White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the
surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour
charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for
finished item of work in all floors.
(BLD-CSTN-11-5)
Unit : 10 sqm
A.MATERIALS :
White cement 2.00 kgs 27.00 1 kgs 54.00
B.LABOUR :
Painter 1st class 0.063 Nos. 580.00 1 Each 36.54
Painter 2nd class 0.147 Nos. 460.00 1 Each 67.62
Mazdoor(unskilled) 0.32 Nos. 420.00 1 Each 134.40
Add for MA @ 25% 0.25 238.56 59.64
Sundries including brushes , ladders
etc., @ 1% 1% 352.20 3.52
Rate per 10 sqm 355.72
Overheads&Contractors Profit 0.13615 355.72 48.43
@13.615%
Rate per 10 sqm 404.15
Rate per 1 sqm 40.42
Say 40
51 Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm
thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface
to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean &
wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180
and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work
site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished
item of work in all floors for internal walls
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
52 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture of average 2 to 3 mm
thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface
to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean &
wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the
surface preparation including cost and conveyance of all materials to work site and all operational, incidental,
labour charges, scaffolding charges, overheads and contractors profit etc., complete for finished item of work in
all floors for external walls
53 Supply & application of one coat water based cement primer of interior grade I and two coats of
synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic
Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials
to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for
finished item of work in all floors.
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
54 Supply & application of one coat water based cement primer of exterior grade II and two coats of
synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic
Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials
to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for
finished item of work in all floors.
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
56 Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and
applying emery paper, sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean &
wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3
hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, sand with
320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of
approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two
coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine
polish, over heads and contractors profit etc., complete for finished item of work
57 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together
through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe
shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom
locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood
cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all
accessories etc., overheads & contractors profit complete for finished item of work as per special spn: 1108
58 Providing specialized polysulphide sealant treatment to the expansion joints (Size : 25mm x 12mm) duly
a). Chipping and removing of existing covering on expansion joints b). Cleaning of the surface from dirt, dust
and other contaminations c).Application of one coat of - High performance specially designed SBR latex
polymer based bonding agent d). Providing and application of Acrylic Polymer modified reinstatement concrete
/mortar to the damaged edges of joint and making the groove. e]. Providing and fixing of masking tape on top
of the joint both sides f). Providing and fixing of Back up support material of Backer rod to leave the depth of
12mm on the joint g). Providing and application of one coat of polysulphide primer on inner edges of Joint. h).
Providing and application of Two part Polysulphide sealant to a width of 25mm and 12mm depth with putty
knife and neat finish i). Removing of masking tape and providing and application of two coats of Acrylic
elastomeric cementitious coating including cost and conveyance of all materials, labour charges, overheads &
contractors profit etc., complete for finished item of work
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
59 Providing and fixing of Expansion joint filler board for buildings, columns, beams and slabs 25 mm
thick including cost and conveyance of all materials to site, all incidental, operational, labour charges
etc.overheads & contractors profit complete for finished item of work as per approved drawing for all floors
61 Providing and Fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel
/ Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/sqm)
with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm
thick as per the design requirement & calculations as given in IS: 875. Primer coat with epoxy primer of 5 – 7
microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of
5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section
should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section
should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding
section should be of 37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean Blue reflective glass.
Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical
to slab, to fix verticals at top & bottom as per site requirement.
Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be
used. Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is
inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all
consumables etc. and scaffolding charges, form work , overheads & contractors profit etc., complete for
finished item of work in all floors.
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
62 Providing and Fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections
made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277
with Zinc of 120 Gm/sqm) with total coated thickness of 0.72mm. The glass holding section made of 304
grade stainless steel of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour
coated steel/powder coated sections as per the design requirement. Design calculations are made to suit wind
pressures as given in IS 875. Primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd
backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The outer
frame should be of 20mm x 58mm x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72 mm, stiffener
section should be 56mm x 31mm x 1mm. EARL Bihari Hinges – 2 Nos for each shutter and Aluminium Stays –
2 Nos. for each shutter, Aluminium Handle – 1 no. for each shutter. The rate is inclusive of cost and
conveyance of all materials to site, all labour charges,
incidental charges, cost of all consumables etc. and scaffolding charges, form work, overheads & contractor
profit etc. complete for finished item of work in all floors.
Rate as per SSR 1.00 sqm 5355.00 1 sqm 5355.00
Overheads&Contractors Profit 0.13615 5355.00 729.08
@13.615%
Rate per 1 sqm 6084.08
Say 6084
63 Supplying and fixing Gyp board Fine line Grid false ceiling (GS-FLC-4.6)using 12.5mm thick Gyp Board
sheet tiles of size 595mm x 595mm conforming to IS 2095 - 1992 fixing to Gyp steel precoated GI wall angle of
size 25mm x 25mm x 0.70mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610mm
center to center and suspending the frame work using precoated GI Tee section (24mm x 38mm x 0.7mm)
from soffit at 1220mm center to center fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners &
connecting clip to the GI Tee section with 4mm dia GI rod with galvanised spring steel level clip of PVC
unversal holding clips system at 1200mm center to center and fixing the 12.5mm Gypboard sheet tiles of size
595mm x 595mm and finishing two coats of drywall top coat, overheads and contractor profit complete for
finished item of work in all floors.
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Basic Cost per 1 sqm 766.79
Overheads&Contractors Profit 0.13615 766.79 104.40
@13.615%
Rate per 1 sqm 871.19
Say 871
64 Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI mark
MS Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational,
incidental, labour charges etc., complete for finished item of work in all floors for stair case head room roof.
65 Roofing with UV resistant multi-wall polycarbonate sheets of any colour 6mm thick fixed with
Aluminium Universal glazing set 40mm wide and as per drawing etc., complete excluding the cost of
purlins,rafters,trusses,aluminium universal glazing set 40mm wide including cost and conveyance of all
materials, labour charges, overheads and contractors profit etc., complete for finished item of work
Unit : 10 sqm
A. MATERIALS:
Cost of multi-wall polycarbonate sheets
6mm thick Rate as per BMT-E.21
10.50 sqm 1147.00 1.00 sqm 12043.50
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 460.00 1.00 No. 386.40
Man mazdoor (beldar) 0.91 Nos. 420.00 1.00 No. 382.20
Add for MA @ 25% 0.25 768.60 192.15
Rate per 10 sqm 13004.25
Rate per 1 sqm 1300.43
cost of washers,screws etc., - LS 60.00
1360.43
Overheads&Contractors Profit 0.13615 1360.43 185.22
@13.615%
Rate per 1 sqm 1545.65
say 1546
66 Supplying and fixing Aluminium Universal glazing set 40mm wide for jointing and fixing
Polycarbonate sheets including cost and conveyance of all materials, labour charges, overheads and
contractors profit etc., complete for finished item of work
Unit : 10 sqm
A. MATERIALS:
Cost of Aluminium Universal glazing set
40mm wideRate as per BMT-E.22 1.00 RM 109.00 1.00 RM 109.00
Labour charges 30% of material cost 0.30 109.00 32.70
Add for MA @ 25% 0.25 32.70 8.18
Rate per 1RM 149.88
Overheads&Contractors Profit 0.13615 149.88 20.41
@13.615%
Rate per 1 RM 170.28
say 170
CIVIL DATA 2019-20 : Page-73
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
67 Suplying and fabricating, erecting and fixing in position tabular trusses of approved design with M.S tube
conforming to I.S specifications including roof frame work consisting of rafters,ties struts and purlins including
cost of foundations bolts, cleats, bearings plates,etc.,complete as per the sketch enclosed and including cost
of painting with enmel paint 2 coats over a primary coat with red oxide paint including cost and conveyance of
all materials, labour charges for fabrication and fixing, hire charges of all tools and plants, all incidental
charges, overheads and contractor profit etc., complete for finished item of work as directed by the Engineer-
in-Charge
68 Supply and delivery of encapsulated plastic steps for man holes manufactured as per companies standard
specification including cost of materials packing as per companiess standards, loading, transportation,
unloading and stacking at site of work , and taxes such as complete sales tax,C.E.D and others etc., as
applicable including labour charges for fixing, overheads and contractor profit etc., complete for finished item
of work.
69 Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs including cost and
conveyance and labour charges for fixing, overheads and contractor profit etc., complete for finished item of
work
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
70 Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water
etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors profit
complete for finished item of work (APSS No. 402 & 403) for 100mm thick precast slabs
(BLD-CSTN-3-13 - A)
A.MATERIALS :
Cement 330.00 Kgs 3900.00 1000.00 Kgs 1287.00
12mm HBG graded metal 0.90 Cum 1039.06 1.00 Cum 935.15
Sand 0.45 Cum 1130.96 1.00 Cum 508.93
B.LABOUR :
1st class Mason 0.067 Nos 500.00 1.00 Each 33.50
2nd class Mason 0.133 Nos 460.00 1.00 Each 61.18
Mazdoor (both Men & Women) 2.500 Nos 420.00 1.00 Each 1050.00
Add for MA @ 25% 0.25 1144.68 286.17
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 142.20 1.00 hour 142.20
Crew Charges 1.00 hour 252.20 1.00 hour 252.20
Add MA on crew charges 0.25 252.20 63.05
Water(including for curing) 1.20 kl 107.00 1.00 kl 128.40
Basic cost per 1 cum 4747.79
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
71 Vaccum dewatering cement concrete flooring 50mm thick using M 30 grade design mix corresponding to
IS 456 with minimum cement content of 400 kgs per 1 cum of concrete and required quantity of Chemical
Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved
quarry in panels as per drawing / design, laid to proper level and slope including consolidating with power
driven mechanical vibrators (both needle & screed vibrators), dewatering by vacuum process "Tremix"
method, floated with neat cement and power troweled to achieve smooth finishing, including MS Shuttering,
finishing, rounding of the edges, curing including cost and conveyance of all materials like cement, coarse
aggregate, sand etc., to site, centering, shuttering, machine mixing, laying concrete, vibrating, curing, hire
charges of all tools and plants, all other incidental and operational charges, labour charges and all taxes etc.,
complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of
work.
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.80 Cum 1238.57 1 Cum 990.86
Sand 0.40 Cum 1130.96 1 Cum 452.38
Cement 400.00 Kgs 3900.00 1000 Kgs 1560.00
Water ( including for curing ) 1.20 Kl 107.00 1 Kl 128.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 142.20 1 hour 142.20
Crew Charges 1.00 hour 252.20 1 hour 252.20
Add MA on crew charges 0.25 252.20 63.05
Needle vibrator 40mm ( petrol ) 1.00 hours 27.60 1 hour 27.60
Crew charges 1.00 hours 181.50 1 hour 181.50
Add MA on crew charges 0.25 181.50 45.38
C.LABOUR :
1st class mason 0.100 Nos. 500.00 1 Each 50.00
Mazdoor (Unskilled) 1.390 Nos. 420.00 1 Each 583.80
Add for MA @ 25% 0.25 633.80 158.45
Rate per 1 cum 4635.82
Cost of design mix M 25 0.50 cum 4635.82 1 cum 2317.91
Hire charges of centering 0.50 cum 64.00 1 cum 32.00
Labour charges for centering 0.50 cum 341.00 1 cum 170.50
Add for MA @ 25% 0.25 170.50 42.63
Vacuum dewatering charges 10.00 sqm 30.00 1 sqm 300.00
Finishing with power trovel 10.00 sqm 35.00 1 sqm 350.00
Cutting 4mm x 25mm grooves 13.00 RM 40.00 1 RM 520.00
Filling grooves with bitumen 13.00 RM 35.00 1 RM 455.00
Rate per 10 sqm 4188.03
Overheads&Contractors Profit 0.13615 4188.03
@13.615% 570.20
Rate per 10 sqm 4758.23
Rate per 1 sqm 475.82
Say 476
CIVIL DATA 2019-20 : Page-76
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
72 Supply of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for
Medium traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's
specification including cost and conveyance of all materials and all labour charges etc.
ROAD WORKS
73 Construction of Granular sub-base by providing HBG material confirming to Grading - III of MORT & H
RBR-SBBS-2/2(A)
Table 400-2 including cost and conveyance of all material to work site and spreading in uniform layers with
motor grader or by approved means, on prepared surface mixing by mix place method with Rotavator/
approved means, at OMC and compacting with vibratory roller to achieve the desired density etc., complete for
finished item of work as per MoRT& H specification 401 (4th revision) and as directed by the Engineer- in -
charge (Payment will be made based on levels for finished item of work)
Unit : 1 cum
Taking output : 300 cum
a) Labour
Mate day 1 day 0.00
Mazdoor skilled 2.40 day 420.00 1.00 day 1008.00
Mazdoor unskilled 8.00 day 420.00 1.00 day 3360.00
Add for MA @ 25% 0.25 4368.00 1092.00
b) Machinery
Mortar Grader 110 HP @ 50 cum per 6.00 hr 3020.40 1 hr 18122.40
hour
Vibratory roller 8T 6.00 hr 2736.20 1 hr 16417.20
Water tanker 6 KL 3.00 hr 655.20 1 hr 1965.60
c) Material Grading III
Coarse graded Granular sub-base
Material 9.5 mm to 4.75 mm @ 66% 255.00 cum 627.06 1 cum 159900.30
Coarse graded Granular sub-base
Material 2.36 mm & below @ 34% 129.00 cum 482.06 1 cum 62185.74
Water 18.00 Kl 107.00 1 Kl 1926.00
265977.24
Basic rate per 1 cum GSB 886.59
d) Overheads&Contractors Profit
@13.615% 0.13615 886.59 120.71
Total 1007.30
Rate per 1 cum Say 1007.00
CIVIL DATA 2019-20 : Page-77
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
Cement Concrete Pavement
74 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete
pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per
Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete
mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in
RBR-CCPV-5
approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges,
steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes,
compacted using needle, scareed and plate vibrators and finished in continuous operation including provision
of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near
approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-
days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical
Specification Clause 1501 MORD.
Unit = cum
Taking output = 75 cum (172.50 t)
(100 x 3.75 x 0.200)
a) Labour
Mate day -
Mason 1st Class 5.00 day 500.00 1 day 2500.00
Mason (2nd class) 5.00 day 460.00 1 day 2300.00
Mazdoor (Unskilled) 150.00 day 420.00 1 day 63000.00
Mazdoor (Skilled) 6.00 day 420.00 1 day 2520.00
Mazdoor ( semi skilled) 6.00 day 420.00 1 day 2520.00
Blacksmith for cutting of dowel bars
including removal of burrs, fabrications &
fixing of dowel bars. 1.00 day 495.00 1 day 495.00
Add for MA @ 25% 0.25 73335.00 18333.75
b) Machinery
Concrete mixer 0.28 / 0.4 cum capacity
(6 mixers) with weigh batcher and
suitable capacity calibrated water tank
36.00 hour 142.20 1 hour 5119.20
crew charges 36.00 hour 252.20 1 hour 9079.20
Add for M25% on crew charges 0.25 9079.20 2269.80
Needle vibrator hire charges 9.00 hour 27.60 1 hour 248.40
crew charges 9.00 hour 181.50 1 hour 1633.50
Add for M25% on crew charges 0.25 1633.50 408.38
Screed vibrator 9.00 hour 50.00 1 hour 450.00
Plate vibrator 9.00 hour 48.00 1 hour 432.00
Concrete joint cutting machine for initial
& final cuts 4.00 hour 100.00 1 hour 400.00
Water tanker 6 kl capacity) 5.00 hour 655.20 1 hour 3276.00
Air Compressor 2 hour 462.20 1 hour 924.40
CIVIL DATA 2019-20 : Page-78
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
c) Material
Crushed stone coarse aggregates,
grading will be as per Clause 1501.2.4.1
(Table 1500.1) of specifications @ 0.90
cum/cum of concrete (25 mm & 12.5
mm blending)
67.50 cum 1138.82 1 cum 76870.01
Sand as per IS:383 and conforming to
Clause 1500.2.4.2 @ 0.45 cum/cum of
concrete 33.75 cum 1130.96 1 cum 38169.90
Cement 26.25 MT 3900.00 1 MT 102375.00
Polythene sheet 125 micron 412.50 sqm 18.00 1 sqm 7425.00
Mild steel dowel bar 25 mm dia of grade
S 240. 500 mm long 20 Nos. at
culvert/bridge slab and at construction
joint including 5 per cent wastage.
(4 x 20 x 0.500) + 5 per cent wastage =
42 m @ 2.80 kg per m = 117.6 kg.
0.12 MT 43000.00 1 MT 5056.80
Bituminous sealant 800 ml per joint for
23 joints ( BMT-H.93)(SoR 2014-15) 19.00 litre 96.00 1 litre 1824.00
Jute rope 12 mm dia including 5 per cent
wastage 90.00 RM 5.00 1 RM 450.00
Polythene sheathing, covering 2/3rd
dowel bars (20x23) and tight fit including
5 per cent wastage 483.00 Nos. 0.60 1 No. 289.80
Plasticizer 0.5 per cent by weight of
cement(BMT-H.63)(SoR 2014 - 15) 122.00 litre 107.00 1 litre 13054.00
Water for curing 18.00 kl 107.00 1 kl 1926.00
Joint filler board 20 mm thick as per
IS:1838 BMT-U.02 3.00 sqm 902.00 1 sqm 2706.00
Total 366056.14
d) Formwork @ 3% of (a+b+c) 0.03 366056.14 10981.68
377037.82
e&f) Overheads & Contractors Profit 0.13615 377037.82 51333.70
Cost for 75 cum = a+b+c+d+e+f 428371.52
Rate per 1 cum = (a+b+c+d+e+f)/75 5711.62
Say 5712
CIVIL DATA 2019-20 : Page-79
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
75 Providing, Laying, Spreading and compacting graded HBG/HBG crushed stone aggregate to Wet Mix
macadem specification including cost of all materials and including premixing the material with water at OMC in
Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base
courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as
directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of
work. (Payment based on levels for finished item of work)
b) Labour charges for aluminium doors ( S.No.11 of Page No. 396 of SoR 2011-12 )
1st class carpenter 0.099 Nos. 580.00 Each 57.42
2nd class carpenter
Power Saw Cutter -Hand Operated - 0.198 Nos. 460.00 Each 91.08
Operator 0.099 Nos. 580.00 Each 57.42
Power Drill -Hand Operated -Operator 0.099 Nos. 580.00 Each 57.42
Mazdoor(Unskilled) 0.297 Nos. 420.00 Each 124.74
Non-technical work inspector 0.099 Nos. 520.00 Each 51.48
Add for MA @ 25% 0.25 439.56 109.89
Machinery
Power Saw Cutter -Hand Operated -
Hire charges
Power Drill -Hand Operated -Hire 0.793 Hrs 102.00 1 Hour 80.89
charges 0.793 Hrs 95.00 1 Hour 75.34
705.67
Power charges for Motors 1% 0.01 705.67 7.06
Labour charges per 1 sqm 712.73
c) Labour charges for aluminium sliding windows ( S.No.10 of Page No. 395 of SoR 2011-12 )
1st class carpenter 0.096 Nos. 580.00 Each 55.68
2nd class carpenter
Power Saw Cutter -Hand Operated - 0.289 Nos. 460.00 Each 132.94
Operator 0.096 Nos. 580.00 Each 55.68
Power Drill -Hand Operated -Operator 0.096 Nos. 580.00 Each 55.68
Mazdoor(Unskilled) 0.289 Nos. 420.00 Each 121.38
Non-technical work inspector 0.096 Nos. 520.00 Each 49.92
Add for MA @ 25% 0.25 471.28 117.82
C.Machinery
Power Saw Cutter -Hand Operated -
Hire charges
Power Drill -Hand Operated -Hire 0.771 Hrs 102.00 1 Hour 78.64
charges 0.771 Hrs 95.00 1 Hour 73.25
740.99
Power charges for Motors 1% 0.01 740.99 7.41
Labour charges per 1 sqm 748.40
d) Labour charges for aluminium partitions partly glazed ( S.No.8 of Page No. 394 of SoR 2011-12 )
1st class carpenter 0.434 Nos. 580.00 Each 251.72
2nd class carpenter 0.434 Nos. 460.00 Each 199.64
Power Saw Cutter -Hand Operated -
Operator 0.043 Nos. 580.00 Each 24.94
Power Drill -Hand Operated -Operator 0.058 Nos. 580.00 Each 33.64
Mazdoor(Unskilled) 0.145 Nos. 420.00 Each 60.90
Non-technical work inspector 0.072 Nos. 520.00 Each 37.44
Add for MA @ 25% 0.25 608.28 152.07
C.Machinery
Power Saw Cutter -Hand Operated -
Hire
Powercharges
Drill -Hand Operated -Hire 0.347 Hrs 102.00 1 Hour 35.39
charges 0.463 Hrs 95.00 1 Hour 43.99
839.73
Joinery data 2019-20 - Page : 53
Power charges for Motors 1% 0.01 839.73 8.40
Labour charges per 1 sqm 848.13
Joinery data 2019-20 - Page : 54
e) Labour charges for aluminium casement windows ( S.No.9 of Page No. 394 of SoR 2011-12 )
1st class carpenter 0.100 Nos. 580.00 Each 58.00
2nd class carpenter
Power Saw Cutter -Hand Operated - 0.300 Nos. 460.00 Each 138.00
Operator 0.100 Nos. 580.00 Each 58.00
Power Drill -Hand Operated -Operator 0.100 Nos. 580.00 Each 58.00
Mazdoor(Unskilled) 0.300 Nos. 420.00 Each 126.00
Non-technical work inspector 0.100 Nos. 520.00 Each 52.00
Add for MA @ 25% 0.25 490.00 122.50
C.Machinery
Power Saw Cutter -Hand Operated -
Hire charges
Power Drill -Hand Operated -Hire 0.800 Hrs 102.00 1 Hour 81.60
charges 0.800 Hrs 95.00 1 Hour 76.00
770.10
Power charges for Motors 1% 0.01 770.10 7.70
Labour charges per 1 sqm 777.80
Joinery data 2019-20 - Page : 55
1 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x
65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x
12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of
30mm thick double shutters with bond wood solid block board type core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made
conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, fixing 1mm
thick mat finish laminated sheet to full width and height of the flush shutter both sides
including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply
and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Alumimium
fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2
Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws,
bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing
glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as
per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less
than 10 mm) (1500mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.60m 3.90 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.50 + 0.50
= 3.50 x 0.10 x 0.065 0.02275 cum
0.05668 cum
including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply
and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium
fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2
Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws,
bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing
glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as
per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less
than 10 mm) (1200mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.60m 3.12 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.20 + 0.50
= 2.90 x 0.10 x 0.065 0.01885 cum
0.05278 cum
6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3
Nos. butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of
200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber /
Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan
light portion etc, including overheads & contractors profit complete for finished item of work as per APSS
1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm)
(1000mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.60m 2.60 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04693 cum
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium
fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt
(IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1
No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws,
bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc.,
including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The
vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x
2100mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.10m 2.10 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.00
= 1.00 x 0.10 x 0.065 0.00650 cum
0.03393 cum
Cost analysis
Cost of medium TW frame 2 m to 3m
length 0.02743 cum 79106.00 1 cum 2169.88
Cost of medium TW frame up to 2 m
length 0.00650 cum 71195.00 1 cum 462.77
Cost of 30 mm thick flush shutter 1.845 sqm 1232.00 1 sqm 2273.04
Cost of 1mm thick mat finish laminated
sheet 3.69 sqm 370.00 1 sqm 1365.30
Labour charges for fixing laminated
sheet 100.00
Cost of MS Z hold fasts 6 Nos. 32.00 Each 192.00
Cost of Aluminium tower bolt 200mm
long 1 No. 103.00 Each 103.00
Cost of Aluminium butt hinges 150mm
long 3 Nos. 120.00 Each 360.00
4 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and
ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core
having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all
sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both
sides including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including
supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium
fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No.
Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc,
including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The
vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900mm x
2100mm)
(BLD-CSTN-13-16)
Size : 0.90m x 2.10m 1.89 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.90
= 0.90 x 0.10 x 0.065 0.00585 cum
0.03328 cum
Cost analysis
Cost of medium TW frame 2 m to 3m
length 0.02743 cum 79106.00 1 cum 2169.88
Cost of medium TW frame up to 2 m
length 0.00585 cum 71195.00 1 cum 416.49
Cost of 30 mm thick flush shutter 1.64 sqm 1232.00 1 sqm 2020.48
Cost of 1mm thick mat finish laminated
sheet 3.28 sqm 370.00 1 sqm 1213.60
Labour charges for fixing laminated
sheet 100.00
Cost of MS Z hold fasts 6 Nos. 32.00 Each 192.00
Cost of Aluminium tower bolt 200mm
long 1 No. 103.00 Each 103.00
Cost of Aluminium butt hinges 150mm
long 3 Nos. 120.00 Each 360.00
5 Supplying and fixing single side prelam solid panel PVC door frame (Choukhat): Providing and fixing
factory made Pac single side Prelam door frame of the size 50x7 mm with a wall thickness of 5mm, made
out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2 Nos. of
150mm long brackets of 15 x 15mm MS Square tube. The two vertical door profiles are to be reinforced
with 19 x 19mm MS. square tube of 19 guage. The door frame shall be fixed to the wall using 65/100mm
long MS. Screws through the frame by using Pac fasteners. a minimum of 4 Nos. of screws to be provided
for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture
specification and direction of Engineer-incharge including conveyance of all materials, labour charges for
fixing, overheads & contractors profit complete for finished item of work.
6 Providing and fixing 30mm thick factory made moulded door shutter- wood free consisting of frame
made out of MS. tubes 19gauge thickness and size of 25mmX25mm for styles, top and bottom rails. MS.
Frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick high density EPS
conforming to IS 4671-1984 bounded with 2mm thick termite proof, water proof and fire resistant moulded
Pac sheet with 2,4,6 raised panel design in different plain and / or pre-lam colours after routing to the
moulded design on one side and 2mm plain and / or pre-lam Pac sheet on other side of the EPS. The edge
of panel to be sealed with lipping of 10mm wide PVC sheet bottom (made by sticking 2 rigid foam sheet of
5mm thickness using Pac solvent cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet
fitted along MS tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm fixed
with upper and lower face of inner side of EPS panel etc., complete as per direction of Engineer – in-
Charge, manufacture specification and drawing including ISI marked Aluminium fixtures 3 Nos. butt hinges
(IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt (IS:204) of 150 mm x 10mm
dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including labour charges
for fixing the shutter to frame etc., including overheads & contractors profit complete for finished item of
work
Rate as per SoR BMT-N.07 (Page 64) 1.333 Sqm 2265.00 1 Sqm 3019.25
Cost of Aluminium tower bolt 150mm
long 1 No. 84.00 Each 84.00
Cost of Aluminium butt hinges 150mm
long 3 Nos. 120.00 Each 360.00
7 Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing
with fixed fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm ,
3.18 mm thick for frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18
mm thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections
25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber
beading in fan light portion, double shutters fitted with 5mm thick frosted / ground glass in the top half
and MDF Board: interior-Both Side Laminated -12 mm thick in the bottom half fitted with suitable
aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of
approved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting
floors as required , embedding in floors
and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete
(Weight Capacity up to 130 Kgs) as approved by Engineer-in-Charge including supply and fixing ISI
marked powder coated aluminium fixtures of 3 Nos. of butt hinges (IS:205) of 150mm long(for each
shutter), 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia
and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door
with required No. of screws etc., including overheads & contractors profit complete for finished item of
work. (The Aluminium section used shall be standard make confirming to IS 1948 – 1961) and as approved
by the Engineer) (2000mm x 2600mm)
(BLD-CSTN-13-31)
Quantity analysis Size : 2.00m x 2.60m 5.20 sqm
Outer frame (101.60 x 44.45, 3.18mm
thick)
Mullions (101.60 x 44.45, 3.18mm 2 x 2.00 + 2 x 2.60 9.20 RM
thick) 1 x 0.50 0.50 RM
9.70 RM
= 9.70 RM @ 2.404 Kgs / RM 23.319 Kgs.
Shutters, styles and rails(47.62mm x
44.45mm , 3.18 mm thick) 4 x 2.10 + 2 x 2 x 1.00 12.40 RM
= 12.40 RM @1.501 Kgs/ RM 18.612 Kgs.
Bottom rails (114.30 x 44.45. 3.18mm
thick) 2 x 1.00 2.00 RM
= 2.00 RM @ 2.646 Kgs / RM 5.292 Kgs.
2 x 2 x 2(1.00+0.50) +
2 x 2 x 2(1.00+1.20) +
Glazing clips 2 x 2 x 2(1.00+0.90) 44.80 RM
= 44.80 RM @ 0.101 Kgs /RM 4.525 Kgs.
51.748 Kgs.
5mm thick plain glass 2 x 1.00 x 0.50 1.00 sqm.
5mm thick ground glass 2 x 1.00 x 1.20 2.40 sqm.
MDF Board: interior-Both Side
Laminated - 12 mm thick 2 x 1.00 x 0.90 1.80 sqm.
Rubber beading 2 x 2(1.00+0.50)+2 x 2(1.00+1.20) 14.80 RM
Cost analysis
A.Material :
Cost of powder coated Al. sections 51.748 Kgs. 306.00 1 Kg. 15834.89
Cost of 5mm thick plain glass 1.00 sqm 474.00 1 sqm 474.00
5mm thick ground glass 2.40 sqm 632.00 1 sqm 1516.80
MDF Board: interior-Both Side
Laminated - 12 mm thick 1.80 sqm 700.00 1 sqm 1260.00
Cost of rubber beading 14.80 RM 2.00 1 RM 29.60
Cost of floor springs 2 Nos. 3537.00 Each 7074.00
Joinery data 2019-20 - Page : 65
Cost of Aluminium butt hinges 150mm
long 6 Nos. 120.00 Each 720.00
Cost of Al. tower bolts 300mm 4 Nos. 144.00 Each 576.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm 2 Nos. 308.00 Each 616.00
B.Labour charges 5.20 sqm 712.73 1 sqm 3706.18
Add for Screws, Nails, Nuts, Bolts etc., LS 2.01
Rate per 5.20 sqm
Overheads&Contractors Profit 32209.48
@13.615% 0.13615 32209.48 4385.32
36594.80
Rate per 1 sqm 7037.46
Say 7037
8 Providing and fixing factory made uPVC white colour sliding glazed window comprising of uPVC
multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section made from roll forming process of required length (shape & size
according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded
interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body
with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame
to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and
fusion
welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing
frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent
over backer rod of required size and of approved quality, all complete as per approved drawing & direction
of Engineer-in-Charge inclusive of cost of Single / double glass panes of 4mm thick pin headed glass, wire
mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein
dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side
shall be accepted. But no extra payment on this account shall be made.
a) Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall
thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension .
Rate as per SoR 1.00 sqm 6038.00 1.00 sqm 6038.00
Deduct cost of 5mm thick plain float
glass 1.00 sqm 474.00 1 sqm -474.00
Add cost of 4mm thick pin headed
glass 1.00 sqm 280.00 1 sqm 280.00
Overheads&Contractors Profit 5844.00
@13.615% 0.13615 5844.00 795.66
Rate per 1 sqm 6639.66
Say 6640
b) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.
wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2
mm and single glazing bead of appropriate dimension
Rate as per SoR 1.00 sqm 8058.00 1.00 sqm 8058.00
Deduct cost of 5mm thick plain float
glass 1.00 sqm 474.00 1 sqm -474.00
Add cost of 4mm thick pin headed
glass 1.00 sqm 280.00 1 sqm 280.00
7864.00
Overheads&Contractors Profit
@13.615% 0.13615 7864.00 1070.68
Rate per 1 sqm 8934.68
Say 8935
Joinery data 2019-20 - Page : 66
9 Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising
of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with
1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape
& size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and
necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners,
mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of
water etc.
After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon
sealant over backer rod of required size and of approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Note:
For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width
of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But, no extra
payment on this account shall be made.
Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm
both
Rate having wall thickness of 1.9 ±0.2 mm and single
as per SoR 1.00glazing
sqm bead of appropriate
5830.00 dimension.
1.00 sqm 5830.00
Overheads&Contractors Profit
@13.615% 0.13615 5830.00 793.75
Rate for 1 sqm 6623.75
Say 6624
10 Supplying and fixing of MS doors, grill to windows / in open court yards using MS angles, flat, square
bars including cost and conveyance of all materials, cutting, bending, welding, all operational charges,
labour charges, overheads and contractor profit etc., complete for finished item of work.
11 Supplying and fixing of two shutter cupboards as per drawing with medium teak wood frames of size
75mm x 40mm and MDF Board Interior grade both sides laminated 18mm thick for shutters with 18mm x
12mm teak wood beading alround and supplying and fixing powder coated MS fixtures 3 Nos. butt hinges
of size 100mm long(for each shutter), tower bolt 2 Nos. of 100mm x 10mm, 2 Nos of handles 100mm long
and standard locking arrangements for shutters including cost and conveyance of all materials to site,
labour charges, over heads and contractor profit etc., complete for finished item of work.
12 Supply & Fixing of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979:
2"x2" (50 mm x 50 mm) - 8 Gauge including cost and conveynace of materials, labour charges cutting &
fixing charges and overheads & contractor profit etc., for complete finished item of work.
Unit = 1SQM
Cost of 2"x2" Chain link mesh (BMT-
F.20) 1.000 Sqm 404.0 1.00 Sqm 404.00
Labour charges 1.000 53.8 53.82
457.82
Overheads&Contractors Profit
@13.615% 0.13615 457.8 62.33
520.15
Rate per 1 sqm Say 520.00
13 Supply & Fabication and fixing of Structural steel for fencing post with 65 x 65 x6 mm size equal
angles and welded with 8mm rods for anchoring concrete at bottom of the fencing post, drilling 5 Nos holes
at equal intervals to MS angles and 50mm wide MS flats of 6mm thick together and fitted with bolts and
nuts after placing of chain linked mesh in position including painting with synthetic enamel paint two coats
over a primary coat of red oxide including cost and conveynace of all materials & labour charges
overheads and contractor profit etc., complete for finished item of work
Unit: 2 RM
65 x 65 x 6mm size angle
(2 RM x 5.80Kg/RM) 2.00 5.80 11.6 Kgs
Supply and fixing of 8 Nos. MS hold fasts of size (450 mm x 100 mm x 8mm) flat of 2 nos welded together
to fix with the help of anchor fasteners of 4 nos (Two on either side) including cost of ISI marked Brass
fixtures of 16 Nos. butt hinges of 250mm long, 3 No. brass aldrops (IS:2681) of 450mm long, 3 Nos. brass
tower bolts (IS:204) of 300 mm x 10 mm dia at top, 4 Nos. of 450mm long brass fanvy handless (IS:208) at
front side and 4 Nos of 300mm Brass handles on back side, 4 Nos.of door stoppers, including fixing the
fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame
in position, fixing the shutter to the frame etc., including cost & conveyence, overheads & contractors profit
etc.. complete for finished item of work 6100mm x 2850mm)
(BLD-CSTN-13-16)
(this item is already approved in
medical college @ TPT) Size : 6.10m x 2.85m 17.39 sqm
Quantity analysis
Outer frame - Vertical 4 x 2.85
=4 x 2.85 x 0.25 x 0.15 0.4275 cum
Outer frame - Horizontal 1 x 6.1
= 6.10 x 0.25 x 0.15 0.22875 cum
1 X 2 X 1.55
= 2 x 1.55 x 0.25 x 0.15 0.11625 cum
0.7725
All round beading 12mm x 12mm =2 x 0.012x0.012x13.40
0.00386 0.00386 Cum
=2 x 0.012x0.012x14.40
0.00415 0.00415 Cum
0.00801 Cum
0.21066 Cum
50 mm thick teak wood shutter 0.210656 Cum
Joinery data 2019-20 - Page : 69
Cost analysis
Cost of 1st grade burma teak wood
upto 2m 0.11625 cum 168485.00 1 cum 19586.38
Cost of 1st grade burma teak wood
upto 2m -3m 0.4275 cum 173298.00 1 cum 74084.90
Cost of 1st grade burma teak wood
above 3m 0.22875 182272.00 1 cum 41694.72
Cost of 50mm thick 1st grade burma
teak wood flanks 0.211 Cum 197369.00 1 cum 41577.04
Cost 12mm thick plain glass 4.560 Sqm 996.00 1 Sqm 4541.76
Cost 12mm thick plain glass 5.760 Sqm 996.00 1 Sqm 5736.96
Cost of MS Flat for Hold Fast including
anchor bolts holes 110.00 Kgs 50.00 1 Kg 5500.00
Cost of Anchor bolts 16.00 Nos. 30.00 1 No 480.00
Cost of Brass atique model tower bolt
of 450mm long 6 Nos. 1400.00 1 Each 8400.00
Cost of Brass atique model butt hinges
of 250mm long 16 Nos. 1500.00 1 Each 24000.00
Cost of Brass atique Ornamental
Aldrop of 450mm long 1 No. 2982.00 1 Each 2982.00
Cost of Brass atique Ornamental
handles 450mm long 4 Nos. 2800.00 1 Each 11200.00
Cost of Brass atique Ornamental
handles 300mm long 4 Nos. 2000.00 1 Each 8000.00
Cost of Brass atique model door
stoppers 4 Nos. 700.00 1 Each 2800.00
Labour charges for frame work( RS
250/Sft) local market rate (which is
approved in SPMC medical college @
TPT) 0.98316 cum 56813.00 1 cum 55856.06
Add for MA @ 25% 0.25 55856.06 13964.02
Labour charges for fixing flush door
shutter to the frame , fixing the fixtures
to the shutter 13.20 sqm 324.00 1 Sqm 4276.80
Add for MA @ 25% 0.25 4276.80 1069.20
Labour charges for fixing glass pans to
door shutter 12.460 Sqm 242.00 1 Sqm 3015.32
Add for MA @ 25% 0.25 3015.32 1 Sqm 753.83
Add for nails, screws etc. 1500.00
331018.99
Overheads&Contractors Profit
@13.615% 0.14 331018.99 45068.24
376087.23
Rate for 1 sqm 21632.86
Say 21633
Joinery data 2019-20 - Page : 70
19 Supply and fixing of front Elevation as per approved drawings with 1st Grade Bhalasha teak wood frame of
section 150mm x 150 mm of 4 verticals of 2.85m height and three horizontals of 6.10m of length each with
a section of 150mm x 150mm. Fixing with 8mm thick Etching Glass using 20mm x 20mm Teak Wood
beading on either side of the glass and The grill frame of bright steel hexoganal shape of 10mm dia 75mm
spacing of succesive 3 rods and 100mm spacing another successive rods embedded with 40mm x 8mm flat
of successive order.
Supply and fixing of 8 Nos. MS hold fasts of size (450 mm x 100 mm x 8mm) flat of 2 nos welded together
to fix with the help of anchor fasteners of 4 nos (Two on either side), including cost and conveyance of teak
wood frame and Glass, overheads & contractors profit complete for finished item of work (6100mm x
2850mm)
(BLD-CSTN-13-16)
(this item is already approved in
medical college @ TPT) Size : 6.10m x 2.85m 17.39 sqm
Quantity analysis
Outer frame - Vertical 4 x 2.85
=4 x 2.85 x 0.15 x 0.15 0.2565 cum
Outer frame - Horizontal 3 x 6.10
=3 x 6.10 x 0.15 x 0.15 0.41175 cum
0.66825
All round beading 20mm x 20mm 55.00
=56 56 RM
Cost analysis
Cost of 1st grade burma teak wood
above 3m 0.41175 cum 182272.00 1 cum 75050.50
Cost of 1st grade burma teak wood
upto 2m -3m 0.2565 cum 173298.00 1 cum 44450.94
Cost of TW beading 56.00 RM 26.00 1 rm 1456.00
Cost of MS Flat for Hold Fast including
anchor bolts holes 110.00 Kgs 50.00 1 Kg 5500.00
Cost of Anchor bolts 16.00 Nos. 30.00 1 No 480.00
Grills (Bright steel 12mm hexagonal
shape) 972 Kgs 55.00 Kg 53443.50
Flat for Grill 321 Kgs 55.00 Kg 17655.00
Making of holes to fix Grills 720 Nos. 30.00 No 21600.00
8mm thick Glass (BMT-I.04) 23 Sqm 870.00 Sqm 20010.00
Labour charges for frame work (Rs.250
per Sft) Local Market rate. 0.66825 cum 46483.00 1 cum 31062.26
Add for nails & screws etc. 1500.00
Rate for 17.39 sqm 272208.20
Overheads&Contractors Profit @14% 0.14 272208.20 38109.15
310317.35
Rate for 1 sqm 17849.72
Say 17850
Joinery data 2019-20 - Page : 71
20 Supply and fixing of doors as per approved drawings with 1st Grade Bhalasha teak wood frame of section
250mm x 150 mm of 4 verticals of 2.85m height with one horizontal at the top of 6.10m of length with a
section of 250mm x 150mm, and at the bottom of frame 2 Nos of 1.25m length horizontals each of section
250mm x 150mm and with 1st grade bhalasha teak wood door shutter of 150mmX35mm thick alround
frame double shutter on center and single shutter on either side and with 12mm thick plain float glass fixid
to door shutter with teak wood beeding of 12mmX12mm
Supply and fixing of 8 Nos. MS hold fasts of size (450 mm x 100 mm x 8mm) flat of 2 nos welded together
to fix with the help of anchor fasteners of 4 nos (Two on either side) including cost of ISI marked Brass
fixtures of 16 Nos. butt hinges of 250mm long, 3 No. brass aldrops (IS:2681) of 450mm long, 3 Nos. brass
tower bolts (IS:204) of 300 mm x 10 mm dia at top, 4 Nos. of 450mm long brass fanvy handless (IS:208) at
front side and 4 Nos of 300mm Brass handles on back side, 4 Nos.of door stoppers, including fixing the
fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame
in position, fixing the shutter to the frame etc., including cost & conveyence, overheads & contractors profit
etc.. complete for finished item of work 6400mm x 2850mm)
(BLD-CSTN-13-16)
(this item is already approved in
medical college @ TPT) Size : 6.40m x 2.85m 18.24 sqm
Quantity analysis
Outer frame - Vertical 4 x 2.85
=4 x 2.85 x 0.25 x 0.15 0.4275 cum
0.20989 Cum
50 mm thick teak wood shutter 0.209894 Cum
Joinery data 2019-20 - Page : 72
Cost analysis
Cost of 1st grade bhalasha teak wood
upto 2m 0.1575 cum 229840.00 1 cum 36199.80
Cost of 1st grade bhalasha teak wood
upto 2m -3m 0.4275 cum 229840.00 1 cum 98256.60
Cost of 1st grade bhalasha teak wood
above 3m 0.2475 254520.00 1 cum 62993.70
Cost of 50mm thick 1st grade bhlasha
teak wood flanks 0.210 Cum 247030.00 1 cum 51850.21
Cost 12mm thick plain glass 7.200 Sqm 1177.00 1 Sqm 8474.40
Cost 12mm thick plain glass 4.320 Sqm 1177.00 1 Sqm 5084.64
Cost of MS Flat for Hold Fast including
anchor bolts holes 110.00 Kgs 50.00 1 Kg 5500.00
Cost of Anchor bolts 16.00 Nos. 30.00 1 No 480.00
Cost of Brass atique model tower bolt
of 450mm long 6 Nos. 1400.00 1 Each 8400.00
Cost of Brass atique model butt hinges
of 250mm long 16 Nos. 1500.00 1 Each 24000.00
Cost of Brass atique Ornamental
Aldrop of 450mm long 1 No. 3200.00 1 Each 3200.00
Cost of Brass atique Ornamental
handles 450mm long 4 Nos. 2800.00 1 Each 11200.00
Cost of Brass atique Ornamental
handles 300mm long 4 Nos. 2000.00 1 Each 8000.00
Cost of Brass atique model door
stoppers 4 Nos. 700.00 1 Each 2800.00
Labour charges for frame work( RS
250/Sft) local market rate (which is
approved in SPMC medical college @
TPT) 1.04239 cum 56813.00 1 cum 59221.55
Add MA @ 25% 0.25000 59221.55 14805.39
Labour charges for fixing flush door
shutter to the frame , fixing the fixtures
to the shutter 13.20 sqm 324.00 1 Sqm 4276.80
Add MA @ 25% 0.25000 4276.80 1069.20
Labour charges for fixing glass pans to
door shutter 12.46000 Sqm 242.00 1 Sqm 3015.32
Add MA @ 25% 0.25000 3015.32 1 Sqm 753.83
Add for nails, screws etc. 1500.00
411081.44
3 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a
minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both
inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a
depth of 1524 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick
using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification
and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all
incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges,
curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
4 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber
upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20
Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all
incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges,
curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
5 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with
C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with
304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost
and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for
finished item of work.
6 Supplying and fixing of 3" (76.2mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site
requirements with standard practice for all floors including cost and conveyance of all materials to site, labour
charges , overheads & contractors profit etc., complete for finished item of work.
WS & SA DATA 2019-20 - Page : 74
7 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site
requirements with standard practice for all floors including cost and conveyance of all materials to site, labour
charges , overheads & contractors profit etc., complete for finished item of work.
10 Supply, Installation and commissioning approved make floor mounted close coupled EWC suit
CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with allinternal parts of dual
flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450
mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work
in all respects: Special Colour - Grade - III
12 Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-
4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality
Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including
wooden block: 630 x 450 mm - Double C.P. Pillar cock
13 Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc., complete
including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for
finished item of work in all floors
14 Supply & fixing soap dish Jaquar make queen series: with 7 years warranty:Chrome plated overheads &
contractors profit for finished item of work in all floors
Cost of NP soap dish 1 No. 208.00 1 Each 208.00
Overheads&Contractors Profit @13.615% 0.13615 208.00 28.32
236.32
Rate per Each say 236
WS & SA DATA 2019-20 - Page : 78
16 Supply and fixing wall mirror with provision for over head shower and 115 mm long bend pipe with wall
flange Jaquarmake queen series with 7 years warranty:Chrome plated overheads & contractors profit for
finished item of work in all floors.
Cost of BMW-I.152 1 No. 4748.00 1 Each 4748.00
Overheads&Contractors Profit @13.615% 0.13615 4748.00 646.44
5394.44
Rate per Each say 5394
17 Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and
aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors
profit for finished item of work.
18 Supply & Fixing of Towel rod 24 " Jaquar make Queen series Ivory gold colour with 7 years warranty
overheads & contractors profit for finished item of work in all floors.
Cost of BMW-I.167 1 No. 2793.00 1 Each 2793.00
Overheads&Contractors Profit @13.615% 0.13615 2793.00 380.27
3173.27
Rate per Each say 3173
18 Supplying and fixing steel surgical long elbow action handle 12.7mm dia bib cock as approved by the
Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors
profit complete for finished item of work in all floors.
19 Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (short body) as
approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges ,
overheads & contractors profit complete for finished item of work in all floors.
21 Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (long body) as
approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges ,
overheads & contractors profit complete for finished item of work in all floors.
22 Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen
series with 7 years warranty Chrome plated including overheads & contractors profit for finished item of
work in all floors.
22 Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm.
and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site
requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and
conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item
of work at all floor levels. (APSS No. 1302 1319 & 1326)
a) 75mm dia
Data for 6 RM
Cost of 75mm dia pipe 6.00 RM 216.00 3 RM 432.00
Cost of PVC clamps 3 Nos. 13.00 Each 39.00
Labour charges 6.00 RM 70.00 1 RM 420.00
891.00
Rate per 1 RM 148.50
Overheads&Contractors Profit @13.615% 0.13615 148.50 20.22
168.72
say 169
b) 90mm dia
Data for 6 RM
Cost of 90mm dia pipe 6.00 RM 343.00 3 RM 686.00
Cost of PVC clamps 3 Nos. 14.00 Each 42.00
Labour charges 6 RM 70.00 1 RM 420.00
1148.00
Rate per 1 RM 191.33
Overheads&Contractors Profit @13.615% 0.13615 191.33 26.05
217.38
say 217
WS & SA DATA 2019-20 - Page : 80
d) 160mm dia
Data for 6 RM
Cost of 160mm dia pipe 6.00 RM 976.00 3 RM 1952.00
Cost of PVC clamps 3 Nos. 30.00 Each 90.00
Labour charges 6 RM 70.00 1 RM 420.00
2462.00
Rate per 1 RM 410.33
Overheads&Contractors Profit @13.615% 0.13615 410.33 55.87
466.20
say 466
23 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR
13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for
hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for
fixing, overheads & contractors profit complete for finished item of work at all floor levels.
a) 15.90mm OD pipe
Rate as per SoR 1 No. 53.00 Each 53.00
Overheads&Contractors Profit @13.615% 0.13615 53.00 7.22
Rate per 1 RM 60.22
say 60
b) 22.20mm OD pipe
Rate as per SoR 1 No. 85.00 Each 85.00
Overheads&Contractors Profit @13.615% 0.13615 85.00 11.57
Rate per 1 RM 96.57
say 97
c) 28.60mm OD pipe
Rate as per SoR 1 No. 123.00 Each 123.00
Overheads&Contractors Profit @13.615% 0.13615 123.00 16.75
Rate per 1 RM 139.75
say 140
d) 34.90mm OD pipe
Rate as per SoR 1 No. 193.00 Each 193.00
Overheads&Contractors Profit @13.615% 0.13615 193.00 26.28
Rate per 1 RM 219.28
say 219
e) 41.30mm OD pipe
Rate as per SoR 1 No. 266.00 Each 266.00
Overheads&Contractors Profit @13.615% 0.13615 266.00 36.22
Rate per 1 RM 302.22
say 302
WS & SA DATA 2019-20 - Page : 81
24 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11
to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot
and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for
fixing, overheads & contractors profit complete for finished item of work at all floor levels.
a) 15.90mm OD pipe
Rate as per SoR 1 No. 61.00 Each 61.00
Overheads&Contractors Profit @13.615% 0.13615 61.00 8.31
Rate per 1 RM 69.31
say 69
b) 22.20mm OD pipe
Rate as per SoR 1 No. 93.00 Each 93.00
Overheads&Contractors Profit @13.615% 0.13615 93.00 12.66
Rate per 1 RM 105.66
say 106
c) 28.60mm OD pipe
Rate as per SoR 1 No. 144.00 Each 144.00
Overheads&Contractors Profit @13.615% 0.13615 144.00 19.61
Rate per 1 RM 163.61
say 164
d) 34.90mm OD pipe
Rate as per SoR 1 No. 229.00 Each 229.00
Overheads&Contractors Profit @13.615% 0.13615 229.00 31.18
Rate per 1 RM 260.18
say 260
e) 41.30mm OD pipe
Rate as per SoR 1 No. 314.00 Each 314.00
Overheads&Contractors Profit @13.615% 0.13615 314.00 42.75
Rate per 1 RM 356.75
say 357
f) 54.00mm OD pipe
Rate as per SoR 1 No. 483.00 Each 483.00
Overheads&Contractors Profit @13.615% 0.13615 483.00 65.76
Rate per 1 RM 548.76
say 549
WS & SA DATA 2019-20 - Page : 83
27 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type
including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for
finished item of work.
28 Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double
layer approved brand and manufacture with cover and suitable locking arrangement and making necessary
holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost
and conveyance of all materials and labour charges , overheads & contractors profit complete for finished
item of work.
29 Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of
Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75
mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and
making good & restoring to original surfaces , overheads & contractors profit complete for finished item of
work in all floors
30 Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make
fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC
flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good &
restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.
31 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with
integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-
1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass
plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC
flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site,
labour charges , overheads & contractors profit complete for finished item of work for all floors.
32 Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with
integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-
1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass
plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC
flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site,
labour charges etc., overheads & contractors profit complete for finished item of work for all floors.
33 Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for
urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all
materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
Supply and fixing of 180mm dia 6 kgs/sqm PVC casing pipe including cost and conveyance of all
materials to site and all labour charges etc., complete for finished item of work
Rate as per SoR (Page 67 of PHE items) 1 RM 635.00 1 RM 635.00
Overheads&Contractors Profit @13.615% 0.13615 635.00 86.46
Rate per 1 RM 721.46
Say 721
35 Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in CM
(1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and conveyance of all
materials and all labour charges, overheads & contractors profit complete for finished item of work for all
floors.
36 Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and
Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2
and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut
without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be
Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves
should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL
5005 with Pocket Less Straight through body Passage conforming to Design standards of
DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and
transportation.PN 1.60
37 Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia.
conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing
holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring ,
Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with
Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes
complete.PN 1.6 (MPa)
38 Manufacture, Supply and delivery of DI D/F Tilting disc Swing Check Valves Slanted seated with maximum
swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast
iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Shafts of stainless
steel, shaft bearing of zinc free bronze and Integral body seat face & disc face with nickel-chromium overlay
welding and micro finished. All the inside and outside of the body is to be coated with double coating of food
grade epoxy liquid lacquer (EP-F) with minimum thickness of 150 microns, color: RAL 5005 Blue face to face
dimensions according to EN 558-1/14/DIN 3202-F4, Flange dimensions according to EN1092-2/IS 1538
39 Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-
40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed
Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding
(Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum
thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade
liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside.
Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN
593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application.PN
1.6 (MPa)
40 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends
conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9 & K7
suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside
zinc coating. Rates are ex-factory, excluding transportation and all taxes.
42 Supply & fixing Angular stop cocks with wall flange Jaquar make Queen series with 7 years warranty:
Chrome plated
43 Supply & Fixing of Towel ring Jaquar make Queen series with 7 years warranty: Ivory Gold
Cellar 1891.70 3.66 284.0 762.0 831.0 1877 1837 78.0 369.0 144.0 102.0 1144.0 1837 0 252.38
Basement 3096.00 3.66 283.0 1786.0 1170.0 3239 2781 249.0 1444.0 986.0 102.0 2781 0 261.60
First Floor 2961.77 3.66 284.0 1652.0 1192.0 3128 2683 312.0 900.0 1367.0 104.0 2683 28.0 28 114.20
2nd floor 3096.00 3.66 284.0 1643.0 1192.0 3119 2746 180.0 2352.0 112.0 102.0 2746 298 28.0 326 115.80
3rd floor 3108.00 3.66 283.0 1647.0 1170.0 3100 2163 100.0 2403.0 43.0 104.0 37 2687 29.0 29 122.50
4th Floor 3096.00 4.20 283.0 1647.0 1170.0 3100 459 130.0 2463.0 43.0 104.0 2740 0 115.60
5th Floor 181.0 195.0 376 364 0 2874 337.0 3211 29.00
Total 17249 0 1882 9332 6725 0 17939 13033 1049 9931 2695 618 1144 37 15474 3172 422 3594 1011
Plinth Brick Masonry qty. in Sqm Dadooing in Sqm Plastering qty. In Sqm Painting (All Floors) qty. In Sqm
Floors Beam Qty. White P.U
in RM 230mm 110mm Total In Toilets Other Areas Total 12mm 20mm Total Wall care Internal External Total
wash Painting
Walls Parapet Ceilings Walls
Cellar 837 1065.22 238.00 1303.22 233.00 6.00 239.00 1294.00 1658.00 2952.00 3993.00 2156.00 797.00 2953.00
Basement 583 2052.17 1262.00 3314.17 525.00 559.00 1084.00 3650.00 3895.00 7545.00 0.00 8864.00 6083.00 1463.00 7546.00
First Floor 1934.78 1358.00 3292.78 993.00 784.00 1777.00 3640.00 4227.00 7867.00 8750.00 6067.00 1802.00 7869.00
2nd floor 1600.00 1394.00 2994.00 772.00 1086.00 1858.00 3511.00 3781.00 7292.00 8598.00 5852.00 1442.00 7294.00
3rd floor 2521.74 1726.00 4247.74 454.00 1341.00 1795.00 4193.00 4956.00 9149.00 9640.00 6989.00 2160.00 30 9179.00
4th Floor 1686.96 1161.00 2847.96 542.00 1578.00 2120.00 2936.00 4269.00 7205.00 7816.00 4894.00 2313.00 7207.00
5th Floor 373.91 458.00 831.91 407.00 1419.00 1826.00 370.00 407.00 1425.00 1832.00
10860.9 373.9 7597.0 18831.8 3519.0 5354.0 8873.0 19631.0 24205.0 43836.0 370.0 0.0 47661.0 32448.0 11402.0 30.0 43880.00
NAME OF THE WORK: CONSTRUCTION OF 200 BEDDED SUPER SPECIALITY HOSPITAL WITH KIDNEY RESEARCH CENTRE & DIALYSIS UNIT AT PALA
Total
Description of Work
Quantity
16385 Earth work excavation for foundations (Mechanical Means) for Earth work excavation Earth work excavation
buildings in ordinary soils and depositing on bank for all lifts
and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
11060 Earth work excavation for foundations (Mechanical Means) for Earth work excavation Earth work excavation
buildings in ordinary soils and depositing on bank for all lifts
and with an initial lead of 10m and 3m to 6m depth including
all operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
2621 Earth work excavation for foundations (Mechanical Means) for Earth work excavation Earth work excavation
buildings in ordinary rock (not requiring blasting) and
depositing on bank for all lifts and with an initial lead of 10m and
up to 3m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and
overheads & contractors profit complete for finished item of
work excluding dewatering charges etc., as per SS 20 B(APSS
308)
575 Earth work excavation for foundations for buildings in hard Earth work excavation Earth work excavation
rock (blasting prohibited) and depositing on bank for all lifts and
with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
887 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Plain Cement Concrete (1:4:8) Plain Cement Concrete (1:4:8)
Coarse aggregate) for foundations using coarse aggregate
40mm size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like cement,
sand, coarse aggregate, water etc. to site including all charges
for machine mixing and hire charges of concrete mixer, laying
concrete in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level curing
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 402) For Foundation
26 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Plain Cement Concrete (1:4:10) Plain Cement Concrete (1:4:10)
Coarse aggregate) for foundations and under flooring bed
using coarse aggregate 40mm size hard , machine crushed
granite from approved quarry using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, sand, coarse aggregate, water etc. to site
including all charges for machine mixing and hire charges of
concrete mixer, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to
the required level curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
21736 Filling with useful available excavated earth (excluding rock) Filling with useful available Filling with useful available excavated
with a lead of 50 m in trenches, sides of foundations and excavated earth earth
basement with initial lead in layers not exceeding 15cm thick,
watering and ramming including cost and conveyance of water
to work site and all operaitonal, incidental, labour charges, hire
charges of T&P etc., and overheads & contractors profit
complete for fnished item of work (APSS NO.309&310)
3237 Pre construction Anti termite treatment is a process in which Pre construction Anti termite Pre construction Anti termite treatment
chemical toxic to subterrean tremites is apply/ inject into soil treatment
during early stage of building Construction 2. Treatement of soil
Beneath the building and around the foundations conduct and
chemical use as per BIS - IS 6313 (Part -2) 2013 code
specification & CIB RC registered termiticide which creates a
continuous chemical barrier beneath the building which kills or
repels terminates & impervious to tremite entry 3. Imidacloprid
30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply
emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal,
external vertical surface of the colums, plinth beams (Back
filling) walls and floor junction, external perimeters, along
reatining wall @ 5.0 Liters/Sqm of the horizontal surface of
basement top surface of the basement filling below flooring bed
(Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The
substructure of a depth of 500mm around coulmns & 300mm
deep around plinth beams, basements & floor filling area
including excavation channel along the wall & rodding etc. cost
& Conveyance of all materials to the site, cost of labour for
sparying, rodding, overheads and contractor profit etc. complete
for furnished item of work as per the approval of the Engineer-
in-charge
39.3 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Footings
2796 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Raft Concrete
119 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Column Pedastals
254 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Plinth Beams
35 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Tie Beam
209 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
STP Bottom Slab/Sump Bottom Slab
4.3 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Haunch Concrete
145 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Cellar :
251 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Basement Floor
237.9 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
First Floor :
214 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Second Floor :
214 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Fourth Floor :
45 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Fifth Floor :
10 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Cellar :
22 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Basement Floor
12 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
First Floor :
21 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Second Floor :
15 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Third Floor :
21 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Fourth Floor :
1 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Fifth Floor :
306 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
100mm thick Drain side walls
Second Floor :
1 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
150mm thick Sump side walls
First Floor :
208 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
150mm thick Water Tank side walls
Fifth Floor :
1098 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402) 230mm thick
Retaining wall
Cellar :
1292.25 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402) 230mm thick
Retaining wall
Basement Floor
46 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
300mm thick STP Side walls
First Floor :
326 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
450mm thick STP/Sump side walls
First Floor :
98 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Cellar :
161 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Basement Floor
173.5 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
First Floor :
161 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Second Floor :
161 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Fourth Floor :
17 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Fifth Floor :
283 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Cellar :
283 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Basement Floor
339 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
First Floor :
284 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Second Floor :
283 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Fourth Floor :
181 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Fifth Floor :
762 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Cellar :
1786 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Basement Floor
2005 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
First Floor :
1643 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Second Floor :
1647 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Fourth Floor :
195 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Fifth Floor :
831 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
Cellar :
1170 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
Basement Floor
1210 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
First Floor :
1192 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
Second Floor :
1170 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
Fourth Floor :
221 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for 100mm thick precast
slabs
100mm thich Precast Slab
Second Floor :
251 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
un supported height up to 4.27 m
Third Floor :
161 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams
un supported height up to 4.27 m
Third Floor :
283 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slab 125mm thick
un supported height up to 4.27 m
Third Floor :
1647 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slab 150mm thick
un supported height up to 4.27 m
Third Floor :
1170 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slab 175mm thick
un supported height up to 4.27 m
Third Floor :
163 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Cellar :
318 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Basement Floor
154 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
First Floor :
231 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Second Floor :
102 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Third Floor :
221 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Fourth Floor :
9 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Fifth Floor :
19 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Cellar :
120 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Basement Floor
34 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
First Floor :
39 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Second Floor :
29 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Third Floor :
192 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Fourth Floor :
3 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Cellar :
40 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Basement Floor
9 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
First Floor :
17 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Second Floor :
71 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Third Floor :
108 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Fourth Floor :
4 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Cellar :
6 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Basement Floor
192 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
First Floor :
6 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Second Floor :
6 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Third Floor :
6 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Fourth Floor :
1 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Cellar :
2 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Basement Floor
1.9 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
First Floor :
3.9 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Second Floor :
2 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Third Floor :
3.3 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Fourth Floor :
245 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Cellar :
472 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Basement Floor
478 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
First Floor :
368 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Second Floor :
580 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Third Floor :
388 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Fourth Floor :
86 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Fifth Floor :
255.00 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
For Compound wall :
238 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Cellar :
1262 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Basement Floor
1358 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
First Floor :
1394 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Second Floor :
1726 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Third Floor :
1161 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Fourth Floor :
458 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Fifth Floor :
5.8 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Cellar :
32.6 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Basement Floor
14 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
First Floor :
18 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Second Floor :
13 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Third Floor :
17 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Fourth Floor :
1 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Fifth Floor :
251.521 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Cellar :
261.6 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Basement Floor
179.53 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
First Floor :
115.8 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Second Floor :
122.5 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Third Floor :
115.6 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Fourth Floor :
29 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Fifth Floor :
0.86 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Cellar :
2.6 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Basement Floor
0.86 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
First Floor :
1.86 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Second Floor :
1.67 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Third Floor :
3.03 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Fourth Floor :
0.23 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Fifth Floor :
1837 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Cellar :
2889 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Basement Floor
2683 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
First Floor :
2746 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Second Floor :
2163 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Third Floor :
459 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Fourth Floor :
364 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Fifth Floor :
1294 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Cellar :
3816 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Basement Floor
3640 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
First Floor :
3511 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Second Floor :
4193 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Third Floor :
2936 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Fourth Floor :
407 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Fifth Floor :
1658 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Cellar :
4082 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Basement Floor
4227 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
First Floor :
3781 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Second Floor :
4956 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Third Floor :
4269 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Fourth Floor :
1419 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Fifth Floor :
5060 Plastering 12mm thick single coat in CM(1:5) using Plastering 12mm thick single coat in Plastering 12mm thick single coat in
screened sand including cost and conveyance of all materials CM(1:5) CM(1:5)
like cement, sand, water etc., to site and all operational,
incidental charges on materials and including cost of all labour
charges for mixing mortar, finishing, curing as directed by
Engineer-in-charge etc., and overheads & contractors profit
complete for finished item of work.(SS 901,903 & 904)
78 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Cellar :
249 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Basement Floor
312 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
First Floor :
180 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Second Floor :
100 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Third Floor :
130 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Fourth Floor :
369 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Cellar :
1444 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Basement Floor
900 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
First Floor :
2352 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Second Floor :
2403 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Third Floor :
2463 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Fourth Floor :
144 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Cellar :
986 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Basement Floor
1367 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
First Floor :
112 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Second Floor :
43 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Third Floor :
43 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Fourth Floor :
102 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Cellar :
102 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Basement Floor
341 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
First Floor :
102 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Second Floor :
104 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Third Floor :
104 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Fourth Floor :
298 Supply of precast concrete blocks for paving of M-40 grade and Supply of precast concrete blocks Supply of precast concrete blocks for
thickness not less than 80 mm for Medium traffic areas for paving of M-40 grade paving of M-40 grade
conforming to IS 15658:2006 in all shapes and designs as per
the manufacturer's specification including cost and conveyance
of all materials and all labour charges etc.
Cellar, Basement Floor & First Floors
1144 Vaccum dewatering cement concrete flooring 50mm thick using Vaccum dewatering cement Vaccum dewatering cement concrete
M 30 grade design mix corresponding to IS 456 with minimum concrete flooring 50mm thick flooring 50mm thick
cement content of 400 kgs per 1 cum of concrete and required
quantity of Chemical Admixtures per 1 cum of concrete using
WEIGH BATCHER / MIXER with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry in
panels as per drawing / design, laid to proper level and slope
including consolidating with power driven mechanical vibrators
(both needle & screed vibrators), dewatering by vacuum
process "Tremix" method, floated with neat cement and power
troweled to achieve smooth finishing, including MS Shuttering,
finishing, rounding of the edges, curing including cost and
conveyance of all materials like cement, coarse aggregate,
sand etc., to site, centering, shuttering, machine mixing, laying
concrete, vibrating, curing, hire charges of all tools and plants,
all other incidental and operational charges, labour charges and
all taxes etc., complete for finished item of work but excluding
cost of steel and its fabrication charges for finished item of work.
For Cellar
43 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Cellar :
82 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Basement Floor
77 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
First Floor :
82 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Second Floor :
78 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Third Floor :
66 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Fourth Floor :
24 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Cellar :
44 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Basement Floor
43 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
First Floor :
44 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Second Floor :
42 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Third Floor :
36 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Fourth Floor :
9 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Cellar :
72 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Basement Floor
25 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
First Floor :
27 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Second Floor :
14 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Third Floor :
161 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Fourth Floor :
11 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Cellar :
31 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Basement Floor
38 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
First Floor :
75 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Second Floor :
40 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Third Floor :
66 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Fourth Floor :
314 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Cellar :
1488 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Basement Floor
912 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
First Floor :
1110 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Second Floor :
1191 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Third Floor :
783 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Fourth Floor :
120 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Cellar :
121 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Basement Floor
78 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
First Floor :
121 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Second Floor :
78 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Third Floor :
78 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Fourth Floor :
233 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Cellar :
525 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Basement Floor
993 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
First Floor :
772 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Second Floor :
454 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Third Floor :
542 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Fourth Floor :
6 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Cellar :
559 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Basement Floor
784 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
First Floor :
1086 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Second Floor :
1341 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Third Floor :
1578 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Fourth Floor :
12 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Cellar :
247 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Basement Floor
27 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
First Floor :
13 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Second Floor :
5 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Third Floor :
5 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Fourth Floor :
40 Filling with well burnt cinder aggregate as per IS:2686-1977 in Filling with well burnt cinder Filling with well burnt cinder
sunken slabs including cost and conveyance of cinder, labour
charges for filling, ramming, overheads and contractor profit
etc., complete for finished item of work
First Floor :
40 Filling with well burnt cinder aggregate as per IS:2686-1977 in Filling with well burnt cinder Filling with well burnt cinder
sunken slabs including cost and conveyance of cinder, labour
charges for filling, ramming, overheads and contractor profit
etc., complete for finished item of work
Second Floor :
41 Filling with well burnt cinder aggregate as per IS:2686-1977 in Filling with well burnt cinder Filling with well burnt cinder
sunken slabs including cost and conveyance of cinder, labour
charges for filling, ramming, overheads and contractor profit
etc., complete for finished item of work
Third Floor :
61 Filling with well burnt cinder aggregate as per IS:2686-1977 in Filling with well burnt cinder Filling with well burnt cinder
sunken slabs including cost and conveyance of cinder, labour
charges for filling, ramming, overheads and contractor profit
etc., complete for finished item of work
Fourth Floor :
40 Reinforced cement concrete (1:5:10) proportion (Cement: fine Reinforced cement concrete (1:5:10) Reinforced cement concrete (1:5:10)
aggregates: coarse aggregate) using 40mm size (SS5) hard proportion proportion
granite metal (coarse aggregate) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand), coarse aggregate, water etc., to site including
centering using Casurina Ballies , Bamboos , Wooden
Reapers , Runners , Wood Posts , Wall Plates etc., shuttering,
machine mixing, laying concrete, lifting concrete manually ,
vibrating, curing, etc., and overheads & contractors profit
complete as per drawings but excluding cost of steel and it's
fabrication charges for finished item of work (APSS NO. 402 &
403) for dummy columns.
Fifth Floor :
1326.00 Providing impervious coat to exposed RCC roof slab surfaces Providing impervious coat 12mm Providing impervious coat 12mm thick
of sump , sump side wall,sump bottom slab,in side of septic thick
tank , in sunken slabs etc. to required slopes with CM (1:3)
prop. using screened sand 12mm thick mixed with integral
cement water proofing liquid confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by
Engineer-in-charge at 200ml per one bag of cement, laid over
roof slab when it is green, finished smooth with a floating coat of
neat cement and thread lining at regular intervals of
45cmx45cm where ever necessary including cost and
conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, operational, incidental, and labour
charges for mixing mortar, laying, lift charges, rendering smooth
and thread lining, curing including rounding off junctions of wall
and slab etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 901 & 903).
First Floor :
465.00 Providing specialized high performance acrylic polymer modified Providing specialized high Providing specialized high
elastomeric cementitious waterproof coating to the bottom and performance acrylic polymer performance acrylic polymer modified
sides of sunken slabs of toilets duly cleaning of the surface from modified elastomeric cementitious elastomeric cementitious waterproof
dirt, dust and other contaminations, providing and application of waterproof coating coating
two coats of high performance Acrylic polymer modified
Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. /
Kg /Each Coat ) including cost and conveyance of all materials
to site, operationals & incidental charges, lift charges etc., and
overheads & contractors profit complete for finished item of
work
0 Providing impervious coat to exposed RCC roof slab surfaces Providing impervious coat 12mm Providing impervious coat 12mm thick
of sump , sump side wall,sump bottom slab,in side of septic thick
tank , in sunken slabs etc. to required slopes with CM (1:3)
prop. using screened sand 12mm thick mixed with integral
cement water proofing liquid confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by
Engineer-in-charge at 200ml per one bag of cement, laid over
roof slab when it is green, finished smooth with a floating coat of
neat cement and thread lining at regular intervals of
45cmx45cm where ever necessary including cost and
conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, operational, incidental, and labour
charges for mixing mortar, laying, lift charges, rendering smooth
and thread lining, curing including rounding off junctions of wall
and slab etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 901 & 903).
Fifth Floor :
308 Providing impervious coat to exposed RCC roof slab surfaces to Providing impervious coat 20mm Providing impervious coat 20mm thick
required slopes with CM (1:3) prop. using screened sand 20mm thick
thick (average) mixed with integral cement water proofing liquid
confirming to IS: 2645-2003 manufactured by reputed
manufacturers as approved by Engineer-in-charge at 200ml per
one bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at
regular intervals of 45cmx45cm including cost and conveyance
of all materials like cement, sand, water proofing compound,
water etc., to site, operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread
lining, curing including rounding off junctions of wall and slab
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 901 & 903).
First Floor :
298 Providing impervious coat to exposed RCC roof slab surfaces to Providing impervious coat 20mm Providing impervious coat 20mm thick
required slopes with CM (1:3) prop. using screened sand 20mm thick
thick (average) mixed with integral cement water proofing liquid
confirming to IS: 2645-2003 manufactured by reputed
manufacturers as approved by Engineer-in-charge at 200ml per
one bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at
regular intervals of 45cmx45cm including cost and conveyance
of all materials like cement, sand, water proofing compound,
water etc., to site, operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread
lining, curing including rounding off junctions of wall and slab
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 901 & 903).
above First Floor :
2874 Providing impervious coat to exposed RCC roof slab surfaces to Providing impervious coat 20mm Providing impervious coat 20mm thick
required slopes with CM (1:3) prop. using screened sand 20mm thick
thick (average) mixed with integral cement water proofing liquid
confirming to IS: 2645-2003 manufactured by reputed
manufacturers as approved by Engineer-in-charge at 200ml per
one bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at
regular intervals of 45cmx45cm including cost and conveyance
of all materials like cement, sand, water proofing compound,
water etc., to site, operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread
lining, curing including rounding off junctions of wall and slab
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 901 & 903).
Fifth Floor :
1110 Providing 110 mm Dia ISI marked PVC down water take Providing 110 mm Dia ISI marked Providing 110 mm Dia ISI marked PVC
pipes with socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI PVC down water take pipes down water take pipes
marked including cost of necessary PVC Bends, shoes, iron /
PVC clamps and all other accessories and fixing in position
including cost and conveyance of all materials, operational &
incidental charges including all labour charges for fixing at site
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 1328)
16 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
Basement Floor
21 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
First Floor :
6 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
Second Floor :
6 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
Third Floor :
6 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
Fourth Floor :
36.6 Supply and fixing of doors as per approved drawings with 1st Supply and fixing of doors as per Supply and fixing of doors as per
Grade Burma teak wood frame of section 250mm x 150 mm of approved drawings with 1st Grade approved drawings with 1st Grade
4 verticals of 2.85m height with one horizontal at the top of Burma teak wood (6100mm x Burma teak wood (6100mm x
6.10m of length with a section of 250mm x 150mm, and at the 2850mm) 2850mm)
bottom of frame 2 Nos of 1.25m length horizontals each of
section 250mm x 150mm and with 1st grade burma teak wood
door shutter of 150mmX35mm thick alround frame double
shutter on center and single shutter on either side and with
12mm thick plain float glass fixid to door shutter with teak wood
beeding of 12mmX12mm Supply and fixing of 8 Nos. MS hold
fasts of size (450 mm x 100 mm x 8mm) flat of 2 nos welded
together to fix with the help of anchor fasteners of 4 nos (Two
on either side) including cost of ISI marked Brass fixtures of 16
Nos. butt hinges of 250mm long, 3 No. brass aldrops (IS:2681)
of 450mm long, 3 Nos. brass tower bolts (IS:204) of 300 mm x
10 mm dia at top, 4 Nos. of 450mm long brass fanvy handless
(IS:208) at front side and 4 Nos of 300mm Brass handles on
back side, 4 Nos.of door stoppers, including fixing the fixtures
to door with required number of screws, bolt and nuts including
labour charges for fixing the frame in position, fixing the shutter
to the frame etc., including cost & conveyence, overheads &
contractors profit etc.. complete for finished item of work
(6100mm x 2850mm)
Basement Floor & First Floors
525.2 Supply and fixing powder coated aluminium fully glazed swing Supply and fixing powder coated Supply and fixing powder coated
door as per the approved drawing with fixed fan light of 500mm aluminium fully glazed swing door aluminium fully glazed swing door
height at top door using aluminium sections of 101.60 mmm x
44.45mm , 3.18 mm thick for frame and door shutter made of
styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm
thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm
thick,powder coating of alluminium sections 25mm microns
thick, 5 mm thick plain float glass fitted with suitable aluminium
glazing clips and rubber beading in fan light portion, double
shutters fitted with 5mm thick frosted / ground glass in the top
half and MDF Board: interior-Both Side Laminated -12 mm thick
in the bottom half fitted with suitable aluminium glazing clips
and rubber beading,shutters mounted on double action
hydraulic floor spring of approved brand manufacture IS : 6315
marked , Hardwyn make M-3000 for doors including cost of
cutting floors as required , embedding in floors and SS cover
plates with brass pivot and sigle piece MS Sheet outer box with
slide plate etc.complete (Weight Capacity up to 130 Kgs)
as approved by Engineer-in-Charge including supply and fixing
ISI marked powder coated aluminium fixtures of 3 Nos. of butt
hinges (IS:205) of 150mm long(for each shutter), 4 Nos.tower
bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium
handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681)
245.7 Supply and fixing of doors as per approved drawings with Supply and fixing of doors as per Supply and fixing of doors as per
medium teak wood frame of section 100mm x 65 mm with split approved drawings with medium approved drawings with medium teak
type fan light of 500mm at the top fixed with 4mm thick pin teak wood wood
headed glass using 12mm x 12mm Teak Wood beading and 2
Nos. of 10mm MS Square bars and ISI marked flush door
shutter of 30mm thick double shutters with bond wood solid
block board type core having cross bands and face veneers, hot
pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides, fixing
1mm thick mat finish laminated sheet to full width and height of
the flush shutter both sides including cost and conveyance to
site of teak wood frame, flush shutter, laminate sheet including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40
mm x 5mm including cost of ISI marked Alumimium fixtures of 6
Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681)
300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm
dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. Rubber / Nylon door stop bushes including
fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light
portion etc., including overheads & contractors profit complete
149.76 Supply and fixing of doors as per approved drawings with Supply and fixing of doors as per Supply and fixing of doors as per
medium teak wood frame of section 100mm x 65 mm with split approved drawings with medium approved drawings with medium teak
type fan light of 500mm at the top fixed with 4mm thick pin teak wood wood
headed glass using 12mm x 12mm Teak Wood beading and 2
Nos. of 10mm MS Square bars and ISI marked flush door
shutter of 30mm thick double shutters with bond wood solid
block board type core having cross bands and face veneers, hot
pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides, fixing
1mm thick mat finish laminated sheet to full width and height of
the flush shutter both sides including cost and conveyance to
site of teak wood frame, flush shutter, laminate sheet including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40
mm x 5mm including cost of ISI marked Aluminium fixtures of 6
Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681)
300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm
dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. Rubber / Nylon door stop bushes including
fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light
portion etc, including overheads & contractors profit complete
123.2 Supply and fixing of doors as per approved drawings with Supply and fixing of doors as per Supply and fixing of doors as per
medium teak wood frame of section 100mm x 65 mm with split approved drawings with medium approved drawings with medium teak
type fan light of 500mm at the top fixed with 4mm thick pin teak wood wood
headed glass using 12mm x 12mm Teak Wood beading and 2
Nos. of 10mm MS Square bars and ISI marked flush door
shutter of 30mm thick single shutter with bond wood solid block
board type core having cross bands and face veneers, hot
pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides fixing 1mm
thick mat finish laminated sheet to full width and height of the
flush shutter both sides including cost and conveyance to site of
teak wood frame, flush shutter, laminate sheet including supply
and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x
5mm including cost of ISI marked Aluminium fixtures of 3 Nos.
butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681)
300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia
at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper
and 1 No. Rubber / Nylon door stop bushes including fixing the
fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing
the shutter to the frame, fixing glass in fan light portion etc,
including overheads & contractors profit complete for finished
294.84 Supply and fixing doors as per drawings with medium teak Supply and fixing of doors as per Supply and fixing of doors as per
wood frame of section 100mm x 65 mm and ISI marked flush approved drawings with medium approved drawings with medium teak
door shutters of 30 mm thick single shutter with bond wood solid teak wood wood
block board type Core having cross bands and face veneers,
hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-
I) both sides commercial ply with internal lipping on all sides,
fixing 1mm thick mat finish laminated sheet to full width and
height of the flush shutter both sides including cost and
conveyance to site of teak wood frame, flush shutter, laminate
sheet including supply and fixing 6 Nos. MS Z hold fasts of size
300 mm x 40 mm x 5mm including cost of ISI marked
Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1
No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of
200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles
(IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop
bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for
fixing the frame in position, fixing the shutter to the frame etc,
including overheads & contractors profit complete for finished
item of work as per APSS 1001 & 1002 (The vertical frame of
door shall be embedded in flooring for a depth of not less than
10 mm) (900mm x 2100mm)
1265 Supplying and fixing single side prelam solid panel PVC Supplying and fixing single side Supplying and fixing single side prelam
door frame (Choukhat): Providing and fixing factory made Pac prelam solid panel PVC door frame solid panel PVC door frame
single side Prelam door frame of the size 50x7 mm with a wall (Choukhat) (Choukhat)
thickness of 5mm, made out of extruded 5mm rigid Pac single
side prelam sheet, meter cut at two corners and joined with 2
Nos. of 150mm long brackets of 15 x 15mm MS Square tube.
The two vertical door profiles are to be reinforced with 19 x
19mm MS. square tube of 19 guage. The door frame shall be
fixed to the wall using 65/100mm long MS. Screws through the
frame by using Pac fasteners. a minimum of 4 Nos. of screws to
be provided for each vertical member and minimum 2nos. for
horizontal member etc. complete as per manufacture
specification and direction of Engineer-incharge including
conveyance of all materials, labour charges for fixing,
overheads & contractors profit complete for finished item of
work.
Cellar to Fourth Floors
425.04 Providing and fixing 30mm thick factory made moulded Providing and fixing 30mm thick Providing and fixing 30mm thick
door shutter- wood free consisting of frame made out of MS. factory made moulded door shutter factory made moulded door shutter
tubes 19gauge thickness and size of 25mmX25mm for styles,
top and bottom rails. MS. Frame shall have a coat of steel
primers. The inner panel shall consist of 25mm thick high
density EPS conforming to IS 4671-1984 bounded with 2mm
thick termite proof, water proof and fire resistant moulded Pac
sheet with 2,4,6 raised panel design in different plain and / or
pre-lam colours after routing to the moulded design on one side
and 2mm plain and / or pre-lam Pac sheet on other side of the
EPS. The edge of panel to be sealed with lipping of 10mm wide
PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm
thickness using Pac solvent cement) and stiles sides
25mm(5mmX5) thick and 30mm width Pac sheet fitted along
MS tube for lock provision for lock height 5mm thick Pac sheet
of size 150mmX100mm fixed with upper and lower face of inner
side of EPS panel etc., complete as per direction of Engineer –
in-Charge, manufacture specification and drawing including ISI
marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of
150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower
bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long
handles (IS:208),1 No. Rubber / Nylon door stop bushes
including labour charges for fixing the shutter to frame etc.,
including overheads & contractors profit complete for finished
1237.44 Providing and fixing factory made uPVC white colour sliding Providing and fixing factory made Providing and fixing factory made
glazed window comprising of uPVC multi-chambered frame with uPVC white colour sliding glazed uPVC white colour sliding glazed
in-built roller track and sash extruded profiles duly reinforced window comprising of uPVC window comprising of uPVC
with 1.60 ± 0.2 mm thick galvanized mild steel section made
from roll forming process of required length (shape & size
according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM
gasket, wool pile, zinc alloy (white powder coated) touch locks
with hook, zinc alloy body with single nylon rollers (weight
bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for
fixing frame to finished wall and necessary stainless steel
screws etc. Profile of frame & sash shall be mitred cut and
fusion welded at all corners, including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size
and of approved quality, all complete as per approved drawing
& direction of Engineer-in-Charge inclusive of cost of Single /
double glass panes of 4mm thick pin headed glass, wire mesh
and silicon sealent . Note: For uPVC frame and sash extruded
profiles minus 5% tolerancein dimension i.e. in depth & width of
profile shall be acceptable.Variation in profile dimension in
higher side shall be accepted. But no extra payment on this
account shall be made.
184.68 Providing and fixing factory made uPVC white colour sliding Providing and fixing factory made Providing and fixing factory made
glazed window comprising of uPVC multi-chambered frame with uPVC white colour sliding glazed uPVC white colour sliding glazed
in-built roller track and sash extruded profiles duly reinforced window comprising of uPVC window comprising of uPVC
with 1.60 ± 0.2 mm thick galvanized mild steel section made
from roll forming process of required length (shape & size
according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM
gasket, wool pile, zinc alloy (white powder coated) touch locks
with hook, zinc alloy body with single nylon rollers (weight
bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for
fixing frame to finished wall and necessary stainless steel
screws etc. Profile of frame & sash shall be mitred cut and
fusion welded at all corners, including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size
and of approved quality, all complete as per approved drawing
& direction of Engineer-in-Charge inclusive of cost of Single /
double glass panes of 4mm thick pin headed glass, wire mesh
and silicon sealent . Note: For uPVC frame and sash extruded
profiles minus 5% tolerancein dimension i.e. in depth & width of
profile shall be acceptable.Variation in profile dimension in
higher side shall be accepted. But no extra payment on this
account shall be made.
132.45 Providing and fixing factory made uPVC white colour fixed Providing and fixing factory made Providing and fixing factory made
glazed windows / Ventilators comprising of uPVC multi uPVC white colour fixed glazed uPVC white colour fixed glazed
chambered frame and mullion (where ever required) extruded windows / Ventilators windows / Ventilators
profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild
steel section made from roll forming process of required length
(shape & size according to uPVC profile), uPVC extruded
glazing beads of appropriate dimension, EPDM gasket,G.I
fasteners 100 x 8 mm size for fixing frame to finished wall,
plastic packers, plastic caps and necessary stainless steel
screws etc. Profileof frame shall be mitred cut and fusion
welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware and
drainage of water etc.
After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer
rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge inclusive of
cost of Single / double glass panes and silicon sealant. Note:
For uPVC frame, sash and mullion extruded profiles minus
5%tolerance in dimension i.e. in depth & width of profile shall be
acceptable.Variation in profile dimension in higher side shall be
accepted. But, no extra payment on this account shall be made.
Fixed windows / Ventilators made of (small series) frame 47 x
50mm & mullion 47 x 68 mm both having wall thickness of 1.9
24654 Supplying and fixing of MS doors, grill to windows / in open Supplying and fixing of MS doors, Supplying and fixing of MS doors, grill
court yards using MS angles, flat, square bars including cost grill to windows / in open court yards to windows / in open court yards
and conveyance of all materials, cutting, bending, welding, all
operational charges, labour charges, overheads and contractor
profit etc., complete for finished item of work. For All Floors
39 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Cellar :
78 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Basement Floor
78 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
First Floor :
78 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Second Floor :
52 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Third Floor :
72 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Fourth Floor :
246 Providing and Fixing Structural Glazing fabricated from Roll Providing and Fixing Structural Providing and Fixing Structural Glazing
formed sections made of Pre-painted Steel / Powder coated Glazing fabricated from Roll formed fabricated from Roll formed sections
(Base steel as per IS 513 of ‘D’ quality, galvanized as per IS sections
277 with Zinc of 120 Gm/sqm) with total coated thickness of
0.72mm. The glass holding section made of 304 grade stainless
steel of 0.6mm thick as per the design requirement &
calculations as given in IS: 875. Primer coat with epoxy primer
of 5 – 7 microns thick, finish painted with a polyester paint of 12-
16 microns thick and back coated with Alkyd backer of 5-7
microns or powder coated with pure polyester powder up to 50-
60 microns thick. The vertical section should be of 50mm
x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame
horizontal section, stiffener section should be 48mm x 98mm x
1mm, cover profiles sections should be of 20mm x 58mm x
0.58mm, Glass holding section should be of 37mm x 37mm &
37mm x 18mm. Including 5mm thick Ocean Blue reflective
glass. Brackets made of CRCA powder coated/Electroplated
should be used to connect vertical to horizontal, vertical to slab,
to fix verticals at top & bottom as per site requirement. Gasket
made of Ethyl Propylene Diamine Monomer. Natural cure, with
Good U.V. Resistance Silicon to be used. Wall fixing of sections
to concrete/masonry wall should be with self-expanding cap &
screws. The rate is inclusive of cost and conveyance of all
materials to site, all labour charges, incidental charges, cost of
all consumables etc. and scaffolding charges, form work ,
overheads & contractors profit etc., complete for finished item of
work in all floors.
53 Providing and Fixing Top Hung shutters in Structural Providing and Fixing Top Hung Providing and Fixing Top Hung
Glazing fabricated from Roll formed sections made of Pre- shutters in Structural Glazing shutters in Structural Glazing
painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ fabricated from Roll formed sections fabricated from Roll formed sections
quality, galvanized as per IS 277 with Zinc of 120 Gm/sqm) with
total coated thickness of 0.72mm. The glass holding section
made of 304 grade stainless steel of 0.6mm thick. Galvanized
steel sections are to be used as stiffeners inside the colour
coated steel/powder coated sections as per the design
requirement. Design calculations are made to suit wind
pressures as given in IS 875. Primer coat with epoxy primer of
5-7 microns thick and back coated with Alkyd backer of 5-7
microns or powder coated with pure polyester powder up to 50-
60 microns thick. The outer frame should be of 20mm x 58mm
x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72
mm, stiffener section should be 56mm x 31mm x 1mm. EARL
Bihari Hinges – 2 Nos for each shutter and Aluminium Stays – 2
Nos. for each shutter, Aluminium Handle – 1 no. for each
shutter. The rate is inclusive of cost and conveyance of all
materials to site, all labour charges,
incidental charges, cost of all consumables etc. and scaffolding
charges, form work, overheads & contractor profit etc. complete
for finished item of work in all floors.
368.1 Supplying and fixing of stainless steel (grade 304) hand Supplying and fixing of stainless Supplying and fixing of stainless steel
railing as per approved drawing with top rail of 50mm dia pipe steel (grade 304) hand railing (grade 304) hand railing
and 2mm thick medium class and vertical posts of 25mm dia
and 1.6mm thick medium class 1 No for each step fixed with
base plate of 75mm dia using bonding agent and anchor
fastner and welding, drilling of 25mm dia holes with pneumatic
compressor for fixing railing, buffing, polishing all members of
the railing thouroughly , lacquer finishing to present seamless
finish including cost and conveyance of all materials, electrodes,
welding charges, cost of all consumables, labour charges ,
overheads & contractors profit etc., complete for finished item of
work. for all floors
801 Supplying and fixing of stainless steel (grade 304) railing Supplying and fixing of stainless Supplying and fixing of stainless steel
for ramp as per approved drawing with top rail of 50mm dia steel (grade 304) railing for ramp (grade 304) railing for ramp
pipe and 2mm thick medium class fixed in to wall with 25mm dia
pipe of 0.30m length @ 1m centre to centre and welding,
buffing, polishing all members of the railing thouroughly ,
lacquer finishing to present seamless finish including cost and
conveyance of all materials, electrodes, welding charges, cost
of all consumables, labour charges , overheads & contractors
profit etc., complete for finished item of work.
4.6 Supply & fixing of Rolling shutter made of 80 x 1.25 mm Supply & fixing of Rolling shutter Supply & fixing of Rolling shutter made
machine rolled CRCA laths, interlocked together through their made of 80 x 1.25 mm of 80 x 1.25 mm
entire length and jointed together at the ends by end-locks,
mounted on specially designed pipe shaft of 50mm dia nominal
bore MS B class pipe with brackets, plates, guide channels,
stoppers, bottom locking plates and arrangements for inside &
outside locking with push-pull operations including cost of hood
cover and springs complete, painted with one coat of approved
steel primer, locks, ball bearings, all accessories etc.,
overheads & contractors profit complete for finished item of
work as per special spn: 1108
519 White washing two coats with white cement to ceiling to give White washing two coats with white White washing two coats with white
an even shade after thouroughly brushing the surface to remove cement to ceiling cement to ceiling
all dirt and remains of loose powdered materials including cost
of all materials , labour charges and incidental such as
scaffolding , lift charges etc., and overheads & contractors profit
complete for finished item of work in all floors.
First & Fifth Floors
47661 Providing and applying Wall putty of White Cement or Providing and applying Wall putty of Providing and applying Wall putty of
Polymer or Cement based of average 1 to 2 mm thickness over White Cement or Polymer or White Cement or Polymer or Cement
plastered surface to prepare the surface even and smooth after Cement based based
thoroughly brushing the surface to remove all dirt and remains
of loose powdered materials, applying emery paper, Sand the
surface, clean & wipe off loose dust, applying knifing paste filler
by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180
and 320 No., emery paper for the surface preparation including
cost and conveyance of all materials to work site and all
operational, incidental, labour charges, over heads and
contractors profit etc., complete for finished item of work in all
floors for internal walls & Ceiling
Cellar to Fourth Floors
32534 Supply & application of one coat water based cement Supply & application of one coat Supply & application of one coat water
primer of interior grade I and two coats of synthetic water based cement primer of based cement primer of interior grade I
polymer luxury plastic emulsion paint of superior grade interior grade I and two coats of and two coats of synthetic polymer
having VOC (Volatile Organic Compound) content less than 50 synthetic polymer luxury plastic luxury plastic emulsion paint
grams/litre for internal walls including cost and conveyance of emulsion paint
all materials to site, incidental, operational and all labour
charges etc., and overheads & contractors profit complete for
finished item of work in all floors.
Cellar to Fifth Floors
10573 Supply & application of one coat water based cement Supply & application of one coat Supply & application of one coat water
primer of exterior grade II and two coats of synthetic water based cement primer of based cement primer of exterior grade
polymer luxury plastic emulsion paint of superior grade exterior grade II and two coats of II and two coats of synthetic polymer
having VOC (Volatile Organic Compound) content less than 50 synthetic polymer luxury plastic luxury plastic emulsion paint
grams/litre for exterior walls including cost and conveyance of emulsion paint
all materials to site, incidental, operational and all labour
charges etc., and overheads & contractors profit complete for
finished item of work in all floors.
Cellar to Fifth Floors
4559 Providing and applying PMCC / Deco orient base or Providing and applying PMCC / Providing and applying PMCC / Deco
Equivalent exterior Texture of average 2 to 3 mm thickness Deco orient base or Equivalent orient base or Equivalent exterior
over plastered surface to prepare the surface even and smooth exterior Texture Texture
after thoroughly brushing the surface to remove all dirt and
remains of loose powdered materials, applying emery paper,
Sand the surface, clean & wipe off loose dust, applying putty/
texture paint filler by putty knife / muslin pad, air dry for 2-3
hrs for the surface preparation including cost and conveyance of
all materials to work site and all operational, incidental, labour
charges, scaffolding charges, overheads and contractors profit
etc., complete for finished item of work in all floors for external
walls
Cellar to Fifth Floors
84 Supply & applying Melamine Polish Glossy/ Matt finish to the Supply & applying Melamine Polish Supply & applying Melamine Polish
wood works duly cleaning the surface and applying emery Glossy/ Matt finish to the wood Glossy/ Matt finish to the wood works
paper, sand the wood with 180 No., emery paper and then with works
320 No., emery paper, clean & wipe off loose dust, applying
suitable knifing paste filler / wood filler by putty knife / muslin
pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery
paper, apply two component wood sealer, air dry for 24 hrs,
sand with 320 No emery paper, applying one coat of approved
spraying thinner (for spraying)/ applying one coat of approved
brushing thinner or general purpose thinner (for brushing) and
apply (either with spray or brush) two coats of approved brand
melamine including cost & labour charges, emery papers, cost
of thinner & melamine polish, over heads and contractors profit
etc., complete for finished item of work
Basement Floor & First Floors
1579.978 Painting two coats with synthetic enamel paint Grade-II Painting two coats with synthetic Painting two coats with synthetic
VOC (Volatile Organic Compound) content less than 50 enamel paint Grade-II VOC enamel paint Grade-II VOC
grams/litre over primer coat of red oxide to new iron work
including cost and conveyance of all materials to site, incidental,
operational and all labour charges etc., and overheads &
contractors profit complete for finished item of work in all floors.
(SS No. 1201, 1212 & 1207).
Cellar to Fifth Floors
347 Supplying and fixing of two shutter cupboards as per Supplying and fixing of two shutter Supplying and fixing of two shutter
drawing with medium teak wood frames of size 75mm x 40mm cupboards cupboards
and MDF Board Interior grade both sides laminated 18mm thick
for shutters with 18mm x 12mm teak wood beading alround
and supplying and fixing powder coated MS fixtures 3 Nos.
butt hinges of size 100mm long(for each shutter), tower bolt 2
Nos. of 100mm x 10mm, 2 Nos of handles 100mm long and
standard locking arrangements for shutters including cost and
conveyance of all materials to site, labour charges, over heads
and contractor profit etc., complete for finished item of work.
Cellar to Fourth Floors
2951 Supplying and fixing Gyp board Fine line Grid false ceiling Supplying and fixing Gyp board Supplying and fixing Gyp board Fine
(GS-FLC-4.6)using 12.5mm thick Gyp Board sheet tiles of Fine line Grid false ceiling line Grid false ceiling
size 595mm x 595mm conforming to IS 2095 - 1992 fixing to
Gyp steel precoated GI wall angle of size 25mm x 25mm x
0.70mm thick along the perimeter of ceiling screw fixed to brick
work / partition at 610mm center to center and suspending the
frame work using precoated GI Tee section (24mm x 38mm x
0.7mm) from soffit at 1220mm center to center fixed with GI
Soffit Cleat, rawl plugs and steel expansion fasteners &
connecting clip to the GI Tee section with 4mm dia GI rod with
galvanised spring steel level clip of PVC unversal holding clips
system at 1200mm center to center and fixing the 12.5mm
Gypboard sheet tiles of size 595mm x 595mm and finishing two
coats of drywall top coat, overheads and contractor profit
complete for finished item of work in all floors.
Third floor & Fourth Floors
1086 Suplying and fabricating, erecting and fixing in position Suplying and fabricating, erecting Suplying and fabricating, erecting and
tabular trusses of approved design with M.S tube conforming and fixing in position tabular trusses fixing in position tabular trusses
to I.S specifications including roof frame work consisting of
rafters,ties struts and purlins including cost of foundations bolts,
cleats, bearings plates,etc.,complete as per the sketch
enclosed and including cost of painting with enmel paint 2
coats over a primary coat with red oxide paint including cost and
conveyance of all materials, labour charges for fabrication and
fixing, hire charges of all tools and plants, all incidental charges,
overheads and contractor profit etc., complete for finished item
of work as directed by the Engineer-in-Charge
Fifth Floor :
170 Supplying and fixing 50mm dia nominal bore Medium Supplying and fixing 50mm dia Supplying and fixing 50mm dia
Grade properties & weight as per IS 1239 ISI mark MS Tube nominal bore Medium Grade nominal bore Medium Grade
for fixing of GI Sheet including cost and conveyance of all
materials to work site and all operational, incidental, labour
charges etc., complete for finished item of work in all floors for
stair case head room roof.
Fifth Floor :
191 Roofing with UV resistant multi-wall polycarbonate sheets of Roofing with UV resistant multi-wall Roofing with UV resistant multi-wall
any colour 6mm thick fixed with Aluminium Universal glazing polycarbonate sheets polycarbonate sheets
set 40mm wide and as per drawing etc., complete excluding the
cost of purlins, rafters,trusses,aluminium universal glazing set
40mm wide including cost and conveyance of all materials,
labour charges, overheads and contractors profit etc., complete
for finished item of work
Fifth Floor :
38 Supplying and fixing Aluminium Universal glazing set Supplying and fixing Aluminium Supplying and fixing Aluminium
40mm wide for jointing and fixing Polycarbonate sheets Universal glazing set Universal glazing set
including cost and conveyance of all materials, labour charges,
overheads and contractors profit etc., complete for finished item
of work
Fifth Floor :
23 Providing and fixing of Expansion joint filler board for Providing and fixing of Expansion Providing and fixing of Expansion joint
buildings, columns, beams and slabs 25 mm thick including cost joint filler board filler board
and conveyance of all materials to site, all incidental,
operational, labour charges etc.overheads & contractors profit
complete for finished item of work as per approved drawing for
all floors
Cellar to Fourth Floors
42 Providing and fixing of 24 gauge alluminium sheet over Providing and fixing of 24 gauge Providing and fixing of 24 gauge
expansion joint groove of width 15cm fixed to walls / columns alluminium sheet over expansion alluminium sheet over expansion joint
at one edge and resting over the other block walls/columns joint groove groove
concealing expansion joint with slotted holes for free edge of
aluminium sheet to facilitate free movement of aluminium sheet
over the finished surface of expansion joint and wall face using
sheet metal screws with nylon receiver complete including cost
and conveyance of all materials to site, all incidental,
operational, labour charges , overheads & contractors profit
etc., complete for finished item of work as per approved drawing
(for all floors for vertical joints and bottom of slab)
Cellar to Fourth Floors
42 Providing specialized polysulphide sealant treatment to the Providing specialized polysulphide Providing specialized polysulphide
expansion joints (Size : 25mm x 12mm) duly a). Chipping and sealant treatment to the expansion sealant treatment to the expansion
removing of existing covering on expansion joints b). Cleaning joints joints
of the surface from dirt, dust and other contaminations
c).Application of one coat of - High performance specially
designed SBR latex polymer based bonding agent d). Providing
and application of Acrylic Polymer modified reinstatement
concrete /mortar to the damaged edges of joint and making the
groove. e]. Providing and fixing of masking tape on top of the
joint both sides f). Providing and fixing of Back up support
material of Backer rod to leave the depth of 12mm on the joint
g). Providing and application of one coat of polysulphide primer
on inner edges of Joint. h). Providing and application of Two
part Polysulphide sealant to a width of 25mm and 12mm depth
with putty knife and neat finish i). Removing of masking tape
and providing and application of two coats of Acrylic elastomeric
cementitious coating including cost and conveyance of all
materials, labour charges, overheads & contractors profit etc.,
complete for finished item of work
Cellar to Fourth Floors
30 Supply and delivery of encapsulated plastic steps Supply and delivery of encapsulated Supply and delivery of encapsulated
manufactured as per companies standard specification plastic steps plastic steps
including cost of materials packing as per companiess
standards, loading, transportation, unloading and stacking at
site of work , etc.,as applicalble including labour charges for
fixing etc. complete for finished item of work.
2 Supplying & fixing 602 x 602 mm CI man hole frame and Supplying & fixing 602 x 602 mm CI Supplying & fixing 602 x 602 mm CI
cover (light weight) 30 Kgs including cost and conveyance man hole frame and cover (light man hole frame and cover (light
and labour charges for fixing, overheads and contractor profit weight) 30 Kgs weight) 30 Kgs
etc., complete for finished item of work
434 Construction of Granular sub-base by providing HBG Construction of Granular sub-base Construction of Granular sub-base by
material confirming to Grading - III of MORT & H Table 400- by providing HBG material providing HBG material confirming to
2 including cost and conveyance of all material to woek site and confirming to Grading - III of MORT Grading - III of MORT & H Table 400-2
spreading in uniform layers with motor grader or by approved & H Table 400-2
means, on prepared surface mixing by mix place method with
Rotavator/ approved means, at OMC and compacting with
vibratory roller to achieve the desired density etc., complete for
finished item of work as per MoRT& H specification 401 (4th
revision) and as directed by the Engineer- in - charge (Payment
will be made based on levels for finished item of work)
231 Construction of un-reinforced, dowel jointed at expansion Construction of un-reinforced, Construction of un-reinforced, dowel
and construction joint only, plain cement concrete dowel jointed at expansion and jointed at expansion and construction
pavement, thickness as per design, over a prepared sub base, construction joint only, plain cement joint only, plain cement concrete
with 43 grade cement or any other type as per Clause 1501.2.2 concrete pavement pavement
M30 (Grade), coarse and fine aggregates conforming to IS :
383, maximum in a concrete mixer of not less than 0.2 cum
capacity and appropeiate weigh batcher using approved mix
design, laid in approved fixed side formwork (steel channel,
laying and fixing of 125 mictron thick polythene film, wedges,
steel plates including levelling the formwork as per drawing),
spreading the concrete with sholvels, rakes, compacted using
needle, scareed and plate vibrators and finished in continuous
operation including provision of contraction and expansion,
construction joints, applying debonding strips, primer, sealant,
dowel bars, near approaches to bridge / culvert and
construction joints, admixtures as approved, curing of concrete
slabs for 14- days, curing compound (where specified) and
water finishing to lines and grade as per drawing and Technical
Specification Clause 1501 MORD.
Amount
Rate Unit
(Rs.)
APSS 308 101 ONE CUM 1654885
NA 89 ONE KG 2194206
NA 73 ONE RM 3066
NA 644 ONE RM 27048
314969670
WATER SUPPLY & SANITARY ARRANGEMENTS
Quantity Description of Work
275.00 Supplying and laying, filling, jointing and testing SWG SP-1 pipe Supplying and laying,
conforming to ISI 651 & 4127 with air tight Cement joints in CM filling, jointing and testing
(1.5:1) prop. including excavation of trenches and socket pits in SWG SP-1 pipe
any soil (except rock requiring blasting) and refilling with
watering and tamping to the required slope including cost and
conveyance of all materials to site and all labour charges ,
overheads & contractor profit etc., complete for finished item of
work (APSS NO 1301 & 1318)
152.40mm dia upto 1524.0mm (5') depth
60.00 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI Supplying and fixing of
make confirming to IS 651 & 4127 with C.I grating & SWG Gully traps
constructing cement brick masonry in CM (1:6) prop.,
intermediate chamber and fitted with 304.8 mm X 288.6 mm
(12"x9") C.I Frame with hinged cover of standard make as
approved including cost and conveyance of all materials to site,
labour charges, overheads & contractors profit etc., complete for
finished item of work.
20.00 Constructing 904.0 mm (3’0”) dia brick masonry inspection Constructing 904.0 mm
chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) (3’0”) dia brick masonry
prop using 2nd Class Clay Bricks of 225 mm thick from inspection chamber
approved source having a minimum crushing strength of 5
N/sq.mm including plastering with cement mortar 1:3 prop; ½”
thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of 904
mm (3'-0") in all sorts of soils (exculding rock) and laying cement
conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and
P.C.C. 1:2:4 benching and channel 100 mm thick as per
Standard specification and including cost and conveyance of all
materials like cement, sand, bricks, water etc., to site and all
incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads &
contractors profit etc., complete for finished item of work as per
Standard specification.
15.00 Constructing 904.0 mm (3’0”) dia brick masonry inspection Constructing 904.0 mm
chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) (3’0”) dia brick masonry
prop using 2nd Class Clay Bricks of 225 mm thick from inspection chamber
approved source having a minimum crushing strength of 5
N/sq.mm including plastering with cement mortar 1:3 prop; ½”
thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of
1524 mm (5'-0") in all sorts of soils (exculding rock) and laying
cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal
and P.C.C. 1:2:4 benching and channel 100 mm thick as per
Standard specification and including cost and conveyance of all
materials like cement, sand, bricks, water etc., to site and all
incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads &
contractors profit etc., complete for finished item of work as per
Standard specification.
311.00 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - Supplying and fixing of 4"
UPVC/SWR pipe fittings as per site requirements with standard (101.6mm) multi floor trap
practice for all floors including cost and conveyance of all with jali
materials to site, labour charges , overheads & contractors profit
etc., complete for finished item of work.
48.00 Supplying and fixing 580mm x 440mm long Orissa pan white Supplying and fixing
glazed Water Closet 1st quality ISI marked confirming to 580mm x 440mm long
IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and Orissa pan white glazed
providing masonry seat, CC squatting plate and 10 litres Water Closet
capacity single flush PVC low level cistern with internal
components fixed on 2 Nos. of teak wood blocks of size
76.20mm x 101.60mm using required size of nails, screws as
approved by Engineer-in-charge, angle stop cock 12.70mm dia.
first quality Indian make heavy duty, 12.70mm PVC connection
with brass union nuts CP coated , 31.75mm brass plumber
union, P trap or S trap of Indian W.C. shall be encased on CC
(1:2:4) 150mm alround well above the joint to stop leakage at
the joint etc., complete including cost and conveyance of all
materials to site, cost of CC bed, labour charges and
seigniorage charges, overheads & contractors profit etc.,
complete for finished item of work.
125.00 Supplying and fixing European Water Closet of 1st quality Supplying and fixing
conforming to IS:2556-Part-2-1973 of white glazed with 'S' European Water Closet
trap,supplying and fixing best Indian make plastic seat and lid
for European water closets with rubber or plastic Buffers as per
IS 2548-1996 and 10 litres capacity single flush PVC low level
cistern with internal components and fixed using required size of
nails and screws, angle stop cock 12.70mm dia. first quality
Indian make heavy duty, 12mm PVC connections with brass
union nuts CP coated including cost and conveyance of all
materials to site, overheads & contractors profit etc., complete
for finished item of work for all floors.
20.00 Supply, Installation and commissioning approved make floor Supply, Installation and
mounted close coupled EWC suit CASCADE model 'P' or 'S' commissioning approved
trap with dual flush porcelain cistern fixed on EWC with make floor mounted close
allinternal parts of dual flush cistern, ultra solid seat cover of coupled EWC suit
approvedmake with rubber buffer and cap 15 mm angle stop
cock 450 mm long PVC inter connection pipe wall flanges all of
approved make etc. complete for finished item of work in all
respects: Special Colour - Grade - III
158.00 Supplying and fixing Indian make Flat Back Wash Hand Basin Supplying and fixing Indian
1st quality conforming to IS:2556-Part-4:1972 of size 550mm x make Flat Back Wash
400mm with 32 mm nominal size C.P. Fitting with parallel pipe Hand Basin
thread conforming to IS:2963-1979 and fitted with 15 mm
nominal bore Chromium Plated Pillar Tap of 1st quality Indian
make heavy duty complete with standard CI brackets including
wooden blocks ,1 No.12.70mm PVC connection with brass
union nuts CP coated , angle stop cock 12.70mm dia. first
quality Indian make heavy duty, 31.75mm dia. PVC flexible
waste pipe 914.4mm length of 1st quality including cost and
conveyance of all materials to site, labour charges , overheads
& contractors profit for finished item of work
22.00 Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st Supplying & Fixing Indian
quality conforming to IS:2556-Part-4:1972 with waste fittings like makeFlat Back Wash
rubber plug, chain,32 mm nominal size C.P. Fitting with parallel Hand
pipe thread conforming to IS:2963- 1979 and fitted with 15 mm
nominal bore Chromium Plated Pillar Tap of 1st quality Indian
make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent
complete with standard CI brackets including wooden block: 630
x 450 mm - Double C.P. Pillar cock
112.00 Supplying and fixing NP soap dish heavy type of approved make Supplying and fixing NP
ISI quality with NP screws etc., complete including cost and soap dish
conveyance of all materials, labour charges for fixing ,
overheads & contractors profit for finished item of work in all
floors
22.00 Supply & fixing soap dish Jaquar make queen series: with 7 Supply & fixing soap dish
years warranty:Chrome plated overheads & contractors profit for Jaquar make queen series
finished item of work in all floors
62.00 Supplying and fixing TV shape mirror with plastic frame of size Supplying and fixing TV
609.6mm x 457.2mm , plywood back with NP screws 1st quality shape mirror with plastic
including cost and conveyance of all materials, labour charges , frame of size 609.6mm x
overheads & contractors profit for finished item of work in all 457.2mm
floors.
6.00 Supply and fixing wall mirror with provision for over head shower Supply and fixing wall
and 115 mm long bend pipe with wall flange Jaquarmake queen mirror with provision for
series with 7 years warranty:Chrome plated overheads & over head shower
contractors profit for finished item of work in all floors.
92.00 Supplying and fixing of 25.4mm dia , 609.6mm long aluminium Supplying and fixing of
anodized towel rods with brackets and aluminium screws 25.4mm dia , 609.6mm
including cost and conveyance of all materials, labour charges , long aluminium anodized
overheads & contractors profit for finished item of work. towel rods
6.00 Supply & Fixing of Towel rod 24 " Jaquar make Queen series Supply & Fixing of Towel
Ivory gold colour with 7 years warranty overheads & contractors rod 24 " Jaquar make
profit for finished item of work in all floors. Queen series
249.00 Supplying and fixing NP bib taps of size 12.70mm dia of Indian Supplying and fixing NP
make heavy duty (long body) as approved by the Engineer-In- bib taps of size 12.70mm
Charge including cost and conveyance of all materials, labour dia of Indian
charges , overheads & contractors profit complete for finished
item of work in all floors.
14.00 Supplying & fixing 15 mm bib tap with flange Chromeum plated Supplying & fixing 15 mm
Jaquar make queen series including overheads & contractors bib tap with flange
profit for finished item of work in all floors. Chromeum plated Jaquar
45.00 Supplying and fixing NP bib taps of size 12.70mm dia of Indian Supplying and fixing NP
make heavy duty (short body) as approved by the Engineer-In- bib taps of size 12.70mm
Charge including cost and conveyance of all materials, labour dia of Indian
charges , overheads & contractors profit complete for finished
item of work in all floors.
19.00 Supply & fixing bib cock cum health faucet with 1 m long flexible Supply & fixing bib cock
tube and wall hook ofJaquar make queen series with 7 years cum health faucet with 1 m
warranty Chrome plated including overheads & contractors long flexible tube
profit for finished item of work in all floors.
417.00 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or Supply and fixing of
equivalent CPVC Pipes and Fittings SDR 11 to meet the Ashirvad/ Ajay/ Astral
requirement of ASTM-D 2846 and are produced in CTS (Copper Flowguard or equivalent
Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) CPVC Pipes and Fittings
including cost and conveyance of all materials to site, labour
charges for fixing, overheads & contractors profit complete for
finished item of work at all floor levels.
15.90mm OD pipe
636.00 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or Supply and fixing of
equivalent CPVC Pipes and Fittings SDR 11 to meet the Ashirvad/ Ajay/ Astral
requirement of ASTM-D 2846 and are produced in CTS (Copper Flowguard or equivalent
Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) CPVC Pipes and Fittings
including cost and conveyance of all materials to site, labour
charges for fixing, overheads & contractors profit complete for
finished item of work at all floor levels.
22.20mm OD pipe
463.00 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or Supply and fixing of
equivalent CPVC Pipes and Fittings SDR 11 to meet the Ashirvad/ Ajay/ Astral
requirement of ASTM-D 2846 and are produced in CTS (Copper Flowguard or equivalent
Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) CPVC Pipes and Fittings
including cost and conveyance of all materials to site, labour
charges for fixing, overheads & contractors profit complete for
finished item of work at all floor levels.
28.60mm OD pipe
123.00 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or Supply and fixing of
equivalent CPVC Pipes and Fittings SDR 11 to meet the Ashirvad/ Ajay/ Astral
requirement of ASTM-D 2846 and are produced in CTS (Copper Flowguard or equivalent
Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) CPVC Pipes and Fittings
including cost and conveyance of all materials to site, labour
charges for fixing, overheads & contractors profit complete for
finished item of work at all floor levels.
34.90mm OD pipe
108.00 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or Supply and fixing of
equivalent CPVC Pipes and Fittings SDR 11 to meet the Ashirvad/ Ajay/ Astral
requirement of ASTM-D 2846 and are produced in CTS (Copper Flowguard or equivalent
Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) CPVC Pipes and Fittings
including cost and conveyance of all materials to site, labour
charges for fixing, overheads & contractors profit complete for
finished item of work at all floor levels.
41.30mm OD pipe
219.00 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or Supply and fixing of
equivalent CPVC Pipes and Fittings SDR 11 to meet the Ashirvad/ Ajay/ Astral
requirement of ASTM-D 2846 and are produced in CTS (Copper Flowguard or equivalent
Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) CPVC Pipes and Fittings
including cost and conveyance of all materials to site, labour
charges for fixing, overheads & contractors profit complete for
finished item of work at all floor levels.
54.00mm OD pipe
490.00 Supplying and fixing 65 mm Nominal Bore GI pipe Medium Supplying and fixing 65
Grade properties & weight as per IS 1239 in ground or on wall mm Nominal Bore GI pipe
with GI fittings such as elbows tees couplings, nipples, plugs Medium Grade properties
including excavation for trenches and refilling the & weight
trenches ,chiselling masonry walls and making good the walls &
floors to the original surface and fixing MS clamps on TW blocks
on walls including cost and conveyance of all materials and
labour charges , overheads & contractors profit complete for
finished item of work except for GI bends union and GI
connectors with checkout and socket Tata or Zenith make or
equivalent
15.00 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS- Supplying and fixing
778 Class - I , Indian make heavy type including cost and Gunmetal Gate ( GM
conveyance of all materials , labour charges , overheads & peet ) valve
contractors profit complete for finished item of work.
20mm Nominal bore
15.00 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS- Supplying and fixing
778 Class - I , Indian make heavy type including cost and Gunmetal Gate ( GM
conveyance of all materials , labour charges , overheads & peet ) valve
contractors profit complete for finished item of work.
25mm Nominal bore
22.00 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS- Supplying and fixing
778 Class - I , Indian make heavy type including cost and Gunmetal Gate ( GM
conveyance of all materials , labour charges , overheads & peet ) valve
contractors profit complete for finished item of work.
32mm Nominal bore
18.00 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS- Supplying and fixing
778 Class - I , Indian make heavy type including cost and Gunmetal Gate ( GM
conveyance of all materials , labour charges , overheads & peet ) valve
contractors profit complete for finished item of work.
40mm Nominal bore
16.00 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS- Supplying and fixing
778 Class - I , Indian make heavy type including cost and Gunmetal Gate ( GM
conveyance of all materials , labour charges , overheads & peet ) valve
contractors profit complete for finished item of work.
50mm Nominal bore
43.00 Supplying and fixing of stainless steel sink of size 914.4 mm Supplying and fixing of
x457.2mm, 1mm thick of Indian make fixed on cantilever stainless steel sink of size
brackets including supply and fixing 31.75mm C.P. waste 914.4 mm x457.2mm
coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm
length of Ist quality ncluding chiselling brick masonry wall and
making good & restoring to original surfaces overheads &
contractors profit complete.for finished item of work in all floors.
1516.00 Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar/ Supplying and fixing of
Kisan/Supreme or any ISI brand) 6 Kg/Sq.cm. and fixing all SWR PVC pipes
special such as plain bends, off sets, door bends, single
junctions, double junctions as per site requirement, fixing with
PVC clamps if necessary with required number of Bombay nails
including cost and conveyance of all materials to site, labour
charges, overheads & contractors profit complete for finished
item of work at all floor levels. (APSS No. 1302 1319 & 1326)
75mm dia
200.00 Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar/ Supplying and fixing of
Kisan/Supreme or any ISI brand) 6 Kg/Sq.cm. and fixing all SWR PVC pipes
special such as plain bends, off sets, door bends, single
junctions, double junctions as per site requirement, fixing with
PVC clamps if necessary with required number of Bombay nails
including cost and conveyance of all materials to site, labour
charges, overheads & contractors profit complete for finished
item of work at all floor levels. (APSS No. 1302 1319 & 1326)
90mm dia
959.00 Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar/ Supplying and fixing of
Kisan/Supreme or any ISI brand) 6 Kg/Sq.cm. and fixing all SWR PVC pipes
special such as plain bends, off sets, door bends, single
junctions, double junctions as per site requirement, fixing with
PVC clamps if necessary with required number of Bombay nails
including cost and conveyance of all materials to site, labour
charges, overheads & contractors profit complete for finished
item of work at all floor levels. (APSS No. 1302 1319 & 1326)
110mm dia
200.00 Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar/ Supplying and fixing of
Kisan/Supreme or any ISI brand) 6 Kg/Sq.cm. and fixing all SWR PVC pipes
special such as plain bends, off sets, door bends, single
junctions, double junctions as per site requirement, fixing with
PVC clamps if necessary with required number of Bombay nails
including cost and conveyance of all materials to site, labour
charges, overheads & contractors profit complete for finished
item of work at all floor levels. (APSS No. 1302 1319 & 1326)
160 mm dia
20000.00 Providing and placing on terrace (at all floor levels) Providing and placing on
polyetheylene water storage tank with double layer approved terrace
brand and manufacture with cover and suitable locking
arrangement and making necessary holes for inlet and outlets
and over flow pipes but without fittings and base support for
tanks including cost and conveyance of all materials and labour
charges , overheads & contractors profit complete for finished
item of work.
34.00 Supplying and fixing white glazed flat back half stall urinals of Supplying and fixing white
size 590 mm x 375 mm x 390 mm with integral flushing rim fixed glazed flat back half stall
with screws complete Indian make (HSW/Parry/Neycer) urinals
conforming to IS:2556-1995 as approved by Engineer-in-charge,
including supply and fixing 12.7mm PVC connection with brass
plumber union nuts CP coated, 12.70mm push cock 1st quality
of approved make , 31.75 mm dia PVC flexible waste pipe of
914.4 mm length of Ist quality including cost and conveyance of
all materials to site, labour charges etc., overheads &
contractors profit complete for finished item of work for all
floors.
29.00 Supplying and fixing of 16mm to 20 mm thick polished marble Supplying and fixing of
slab partitioins of size 4' 0" x 2' 0" for urinals including full 16mm to 20 mm thick
rounding the edges , fixing in position, polishing, including cost polished marble slab
and conveyance of all materials and labour charges , overheads partitioins
& contractors profit complete for finished item of work for all
floors
34.00 Supplying and fixing of 101.60mm x 609.60mm white glazed Supplying and fixing of
porcelain channels 1st quality fixed in brick masonry to the 101.60mm x 609.60mm
required slopes , white cement pointing including cost and white glazed porcelain
conveyance of all materials and labour charges , overheads & channels
contractors profit complete for finished item of work for all
floors.
210.00 Construction of brick masonry support for GI pipe of size Construction of brick
304.80mm x 228.60mm x 228.60 mm in CM (1:8) prop including masonry support for GI
plastering and finishing with 12mm thick in CM (1:5) including pipe
cost and conveyance of all materials and all labour charges,
overheads & contractors profit complete for finished item of work
for all floors.
ANITARY ARRANGEMENTS
Rate Units Amount
Supplying and laying, APSS NO 1301 & 635.00 ONE RMT (Rs.)
174625
filling, jointing and testing 1318
SWG SP-1 pipe
Supplying and fixing of APSS No. 1302 169.00 ONE RMT 256204
SWR PVC pipes 1319 & 1326
Supplying and fixing of APSS No. 1302 217.00 ONE RMT 43400
SWR PVC pipes 1319 & 1326
Supplying and fixing of APSS No. 1302 243.00 ONE RMT 233037
SWR PVC pipes 1319 & 1326
Supplying and fixing of APSS No. 1302 466.00 ONE RMT 93200
SWR PVC pipes 1319 & 1326
4880968
0
ABSTRACT ESTIMATE FOR EXTERNAL WATER SUPPLY & SEWE
Quantity Description of Work
300.00 Earth work excavation for foundations (Mechanical Means) for Earth work excavation for
buildings in ordinary soils and depositing on bank for all lifts foundations
and with an initial lead of 10m and up to 3m depth including
all operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
65.00 Supplying and laying, filling, jointing and testing SWG pipes Supplying and laying,
Ist quality with air tight Cement joints in CM (1.5:1)prop. filling, jointing and
including excavation of trenches and socket pits in any soil testing SWG pipes
(except rock requiring blasting) and refilling with watering and
tamping to the required slope including cost and conveyance
of all materials to site and all labour charges for finished item
of work (APSS NO 1301 & 1318)
203.20mm dia upto 1524mm ( 5' ) depth
55.00 Supplying and laying, filling, jointing and testing SWG pipes Supplying and laying,
Ist quality with air tight Cement joints in CM (1.5:1)prop. filling, jointing and
including excavation of trenches and socket pits in any soil testing SWG pipes
(except rock requiring blasting) and refilling with watering and
tamping to the required slope including cost and conveyance
of all materials to site and all labour charges for finished item
of work (APSS NO 1301 & 1318)
254mm dia upto 1524mm (5') depth
150.00 Supplying & fixing of rcc hume pipe NP2 class 300mm dia Supplying & fixing of rcc
conforming to BIS:458/2003 including cost all taxes and hume pipe NP2 class
conveynce of all meterial such as RCC NP2 class pipes, 300mm dia conforming
collars and other required specials excluding earth work
excavation using machinary and refilling for pipe lines as per
approved plan and as directed by Engineer in-charge
including cost taxes and conveyance of all meterials including
alll labour charges for laying in possitions jointing with
required meterials as per standered specifications etc...
complete finished item of work
4.00 Manufacture, Supply and delivery of PN-1.6 CI D/F Sluice Manufacture, Supply and
valves conforming to IS 14846/2000 with amendments No. delivery of PN-1.6 CI D/F
1&2 heavy duty with CI grade FG 260 as per IS: 210. Two Sluice valves
coats of primer suitable for EPOXY PAINTS finish shall be
applied to all metal surface and finally two coats of Epoxy
Paint. The Valves shall be tested for (closed end Test) against
Hydrostatic test requirement. The rates are including
transportation, over heads and contractor profit., complete.
100mm Dia
3 Supply, Delivery of D.I Double Flanged Swing Check type Supply, Delivery of D.I
Reflux valves (Non Return Valves) of following dia. Double Flanged Swing
conforming to IS- 5312 (Pts-1&2) (with amendments up to Check type Reflux valves
date, if any) having Body, Cover, Door, Bearing holder with (Non Return Valves)
D.I; Hinge pin, Door pin, Door suspension pin with Stainless
Steel (IS 6603); Body seat ring , Door face ring, Bearing
bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 );
Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges
with Cast steel; excluding transportation and all taxes
complete.PN 1.6 (MPa)
100mm Dia
100.00 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, Centrifugally cast (Spun)
gas and sewage with Socket Spigot ends conforming to IS.: Ductile Iron pressure pipes
8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter
for classification K9 & K7 suitable for push-on-joint (rubber
gasket d jointing) with cement mortar lining inside the pipes
with outside zinc coating. Rates are ex-factory, excluding
transportation and all taxes.
100mm Dia
3.00 Manufacture, Supply and delivery of DI D/F Butterfly Valves, Manufacture, Supply and
Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or delivery of DI D/F Butterfly
GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Valves,
Double eccentrically designed Disc., with renewable soft seal
on the disc and Integral Body seat face of nickel-chromium
overlay welding (Fusion Bonded) micro finished, 100 % leak
tight in both directions, Medium free bearings and with
minimum thickness of 250 microns Fusion bonded food grade
epoxy coating and 1200mm dia. and above food grade liquid
Epoxy coating of minimum 150 microns applied on both body
and disc inside and outside Face to face dimensions as per
EN558-1/IS 13095 body or IS: 13095 long body design
standard as per EN 593/IS 5163 Flange drilling as per EN
1092-2/ IS 1538 the Valve should be suitable for buried
application.PN 1.6
(MPa)
Supplying and laying, APSS NO 1301 & 1318 876.00 Rmt 56940.00
filling, jointing and
testing SWG pipes
Supplying and laying, APSS NO 1301 & 1318 1263.00 Rmt 69465.00
filling, jointing and
testing SWG pipes
881840.00
0.00
Quantity Description
MECHANICAL WORKS
1.00 Supply and fixing, testing and commissioning of Manual Coarse Bar
Screen
Size: To Suit 400mm Wide x 200mm Liquid Height
Clear Opening of Screen: 25mm
Size of Flat: 50mm x 6mm
Angle of Inclination: 60 Degree
Shape of Screen: Curved Top
Accessories: Rake & 2 Nos. Side Plate
MOC: SS 304
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
1.00 Supply and fixing, testing and commissioning of Manual Fine Bar
Screen
Size: To Suit 300mm Wide x 200mm Liquid Height
Clear Opening of Screen: 10mm
Size of Flat: 50mm x 6mm
Angle of Inclination: 45 Degree
Shape of Screen: Curved Top
Accessories: Rake
MOC: SS 304
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
1.00 Supply and fixing, testing and commissioning of Slotted Pipe Oil
Skimmer
Size: To Suit 750mm Wide Oil & Grease Trap
Size of Slotted Pipe: 200mm Dia
Type of Operation: Manual Hand Wheel
MOC of All Wetted Parts : SS 304
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
2.00 Supply and fixing, testing and commissioning of Equ Tank Blower
Capacity of Blower: 50m3/Hr @ 5.5 MWC
Type of Blower: Twin Lobe
MOC of Blower: CI
Speed of Blower : Less than 1000 RPM
Speed of Blower Motor: 1440 RPM
The Blower shall be complete with Blower & Motor mounted on a
common base frame, belt drive, belt guard, Suction & Discharge
Silencer, Air Filter, Safety Valve, NRV, etc., complete.
Make: Kay/Everest/Swan
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
20.00 Supply and fixing, testing and commissioning of Fine Bubble Diffusers
Type: Tubular
Size: 1.0m Long x 90 Dia
MOC: EPDM
Make: Rehau/OTT/SSI/Aquaflex/Techpro/Shridevi /Sreetech
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
100.00 Supply and fixing, testing and commissioning of Air Piping from Blower
upto Diffusers for Equ Tank Blower & Aeration Blower
MOC of Exposed Pipes: SS 304
MOC of Vertical Drops: SS 304
MOC of Under Water pipes: SS 304
MOC of Guide Pipe & Lifting Chain: SS 304
The Air Piping shall be complete with Individual blower delivery piping
with NRV, Diaphragm Valve, Main Header Piping from the Blower
delivery up to equ tank/aeration tank including drop/vertical piping,
header along the tank, vertical drop pipes with control valve &
dismantling type joint, diffuser header pipe & laterals with nozzles for
diffuser, end cap, vertical guide pipe at the other end of diffuser
header, lifting chain, etc., complete. The design of piping shall be such
that it should be possible to remove diffusers from the tanks without
emptying tank & shutting off the system. The arrangement shall be
that the we should be able to take out the Vertical drop pipe & the
diffuser header just by dismantling the joint in the vertical drop pipe and
should be able to refix the same in position.
18.00 Supply and fixing, testing and commissioning of Media for MBBR Tank
Volume of Media: 18 Cu.m
Shape of Media: Conical Frustum
Surface Area: 300 m2/m3 of media
Structure: Cylindrical with Fins
Sp Gravity: 0.9 to 0.95
MOC: P P UV Stabilised (Black Colour) (70000.00 Pieces Per Cum )
Make: Rehau/OTT/SSI/Aquaflex/Techpro/Shridevi /Sreetech
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
2.00 Supply and fixing, testing and commissioning of Filter Feed Pump
Capacity of Pump: 10 Cu.m/Hr @ 30m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Closed
MOC of Casing: CI
MOC of Impeller: CI
Make: Johnson/Kirloskar/KSB/Grundfos
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
1.00 Supply and fixing, testing and commissioning of Pressure Sand Filter
Capacity of Filter: 7.50 Cu.m/Hr.
Minimum Dia of Filter: 1.00m
Minimum HOS of Filter: 1.8m
Minimum Height of Filter Sand: 0.30m
Minimum Plate Thickness for Shell & Dish: 6mm
Type of Underdrain: Nozzle Plate with Plastic Nozzles
Type of Inlet: Inlet Distribution Box/ Bell Mouth.
Specification for Filter Media: As per CPHEEO Manual
MOC of Filter: MSEP
Accessories: Frontal Piping & Valves.
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
1.00 Supply and fixing, testing and commissioning of Activated Carbon Filter
Capacity of Filter: 7.50 Cu.m/Hr.
Minimum Dia of Filter: 1.00m
Minimum HOS of Filter: 1.8m
Minimum Height of Activated Carbon: 0.30m
Minimum Plate Thickness for Shell & Dish: 6mm
Type of Underdrain: Nozzle Plate with Plastic Nozzles
Type of Inlet: Inlet Distribution Box.
Type of Activated Carbon: Coal Based/Coconut shell
Minimum Iodine Value for Activated Carbon: 1000
MOC of Filter: MSEP
Accessories: Frontal Piping & Valves.
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
1.00 Supply and fixing, testing and commissioning of FeCl3 solution dosing
System
Dosing System shall be complete with
1 No. - 50 Lit Capacity HDPE Tank with Inlet & Outlet Connections,
Level Indicator
1 No. - Agitator to suit 50 Lit HDPE tank of SS 304 MOC, 100 RPM
speed.
Dosing Pump, 0 - 6 LPH Capacity, 2 Nos.
Complete Flexible Tubing with Valves, NRV's, Strainers, etc., from
Dosing Tank to dosing Point
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
2.00 Supply and fixing, testing and commissioning of Treated Water Pump
Capacity of Pump: 15 Cu.m/Hr @ 20m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Closed
MOC of Casing: CI
MOC of Impeller: CI
Make: Johnson/Kirloskar/KSB/Grundfos
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
2.00 Supply and fixing, testing and commissioning of Filter Press Feed
Pump
Capacity of Pump: 1 Cu.m/Hr @ 20m Head
Type of Pump: Screw Pump
Impeller Type: Screw
MOC of Casing: CI
MOC of stator : Nitrile
MOC of rotor : SS 304
Make: PD pumps / Rotomac / Alpha helical /Roto
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
1.00 Supply and fixing, testing and commissioning of Manual Plate Filter
Press
Size of Plate: 610 x 610mm
No. of Chambers: 8 Chamber
Operation: Hydraulic Pump
Capacity: For Dewatering of 2 Cu.m/Day, 3% Sludge in 10Hour
Make: Hydro Press/Yo-Tana/Amar
including all incidental and operational charges etc, as per approved
drawings and as directed by Engineer-in-charge complete for finished
item of work.
2 Wiring with three runs of 1.5 sq.mm FRLS / HFFR / ZHFR P.V.C.
insulated 1100V grade as per IS : 694 / 1990 specificationflexible
copper cable (phase, neutral, earth) in the existing conduit pipe with 6
Amps Modular type switch, and 6 A 3/2 pin Modular type socket with
cover plate on common switch board etc., complete.
Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam /
KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal /
Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar
2 Supply and Fixing of 16A/6A, 2 in one socket with 16A switch control
modular type with MS flush boxes with front cover plate including all
labour charges etc., complete.
Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam /
KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal /
Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar
100 Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) FRLS /
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990
specification flexible copper cable in existing MS conduit pipe for
individual ligting circuits including labour charges etc., complete as
required for switch boards.
Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam /
KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal /
Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar
100 Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS /
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990
specification flexible copper cable in existing conduit pipe for run of
mains including labour charges etc., complete as required including
labour charges for 16A sockets.
Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam /
KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal /
Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar
25 Supply & run of 3 of 6.0 Sqmm (84/0.3mm) (phase neutral and earth)
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 /
1990 specification flexible copper cable in existing MS conduit pipe for
run of mains including labour charges etc. complete for AC points &
SDB's etc as required.
Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam /
KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal /
Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar
50 Supply and run of No. 8SWG GI wire including cost of all accessories
and labour charges etc complete.
50 Supply and run of 25mmX6mm GI strip including cost of all accessories
and labour charges etc complete.
10.00 fixing of LED / MV / SV/ MH luminaire on wall with 1.0Mtr of 40mm dia
GI pipe bracket and anti tilting MS Flat with 2.5 Sq.mm flexible copper
wire etc.,including all labour charges for mason work and giving
connections etc., complete.
Sub - Total
Rate Unit
Supply and fixing, testing and Supply and fixing, testing NA 32,000 EACH
commissioning of Manual Coarse Bar and commissioning of
Screen Manual Coarse Bar Screen
Supply and fixing, testing and Supply and fixing, testing NA 44,000 EACH
commissioning of Manual Fine Bar and commissioning of
Screen Manual Fine Bar Screen
Supply and fixing, testing and Supply and fixing, testing NA 85,000 EACH
commissioning of Slotted Pipe Oil and commissioning of
Skimmer Slotted Pipe Oil Skimmer
Supply and fixing, testing and Supply and fixing, testing NA 120,000 EACH
commissioning of Equ Tank Blower and commissioning of Equ
Tank Blower
Supply and fixing, testing and Supply and fixing, testing NA 750 EACH
commissioning of Coarse Bubble and commissioning of
Diffusers Coarse Bubble Diffusers
Supply and fixing, testing and Supply and fixing, testing NA 68,000 EACH
commissioning of Equ and commissioning of
Effluent/Sewage Pump Coarse Bubble Diffusers
Supply and fixing, testing and Supply and fixing, testing NA 95,000 EACH
commissioning of Mixer for Anoxic and commissioning of
Tank Mixer for Anoxic Tank
Supply and fixing, testing and Supply and fixing, testing NA 160,000 EACH
commissioning of Aeration Blower and commissioning of
Aeration Blower
Supply and fixing, testing and Supply and fixing, testing NA 2,000 EACH
commissioning of Fine Bubble and commissioning of Fine
Diffusers Bubble Diffusers
Supply and fixing, testing and Supply and fixing, testing NA 450.00 ONE KG
commissioning of Air Piping from and commissioning of Air
Blower Piping from Blower
Supply and fixing, testing and Supply and fixing, testing NA 13,000.00 ONE
commissioning of Media for MBBR and commissioning of CUM
Tank Media for MBBR Tank
Supply and fixing, testing and Supply and fixing, testing NA 57,000 EACH
commissioning of Internal and commissioning of
Recirculation Pump Internal Recirculation Pump
Supply and fixing, testing and Supply and fixing, testing NA 38,000 EACH
commissioning of Sludge Pump and commissioning of
Sludge Pump
Supply and fixing, testing and Supply and fixing, testing NA 108,000 EACH
commissioning of UV Disinfection and commissioning of UV
System Disinfection System
Supply and fixing, testing and Supply and fixing, testing NA 50,000 EACH
commissioning of Filter Feed Pump and commissioning of Filter
Feed Pump
Supply and fixing, testing and Supply and fixing, testing NA 150,000 EACH
commissioning of Pressure Sand and commissioning of
Filter Pressure Sand Filter
Supply and fixing, testing and Supply and fixing, testing NA 220,000 EACH
commissioning of Activated Carbon and commissioning of
Filter Activated Carbon Filter
Supply and fixing, testing and Supply and fixing, testing NA 40,000 ONE SYSTEM
commissioning of Hypochlorite and commissioning of
solution dosing System Hypochlorite solution
dosing System
Supply and fixing, testing and Supply and fixing, testing NA 25,000 ONE SYSTEM
commissioning of FeCl3 solution and commissioning of
dosing System FeCl3 solution dosing
System
Supply and fixing, testing and Supply and fixing, testing NA 57,000 EACH
commissioning of Treated Water and commissioning of
Pump Treated Water Pump
Supply and fixing, testing and Supply and fixing, testing NA 50,000 EACH
commissioning of Filter Press Feed and commissioning of Filter
Pump Press Feed Pump
Supply and fixing, testing and Supply and fixing, testing NA 125,000 EACH
commissioning of Manual Plate Filter and commissioning of
Press Manual Plate Filter Press
Supply and fixing, testing and Supply and fixing, testing NA 65,000 ONE SYSTEM
commissioning of Dewatering PE and commissioning of
solution dosing System Dewatering PE solution
dosing System
Supply and fiing , testing and Supply and fiing , testing NA 10,000.00 ONE
commissioning of Tube deck Media and commissioning of Tube CUM
for Tube settler . deck Media for Tube settler
.
250 A Aluminium Bus Bar with colour 250 A Aluminium Bus Bar NA 155000.00 EACH
code. with colour code.
Wiring with three runs of 1.5 sq.mm Wiring with three runs of NA 275.00 ONE POIN
FRLS / HFFR / ZHFR P.V.C. 1.5 sq.mm FRLS / HFFR /
insulated 1100V grade ZHFR P.V.C. insulated
1100V grade
Supply and 3 runs of 4.0 sq mm Supply and 3 runs of 4.0 NA 114.00 ONE RM
(phase neutral and earth) FRLS / sq mm (phase neutral and
HFFR / ZHFR P.V.C. insulated earth) FRLS / HFFR /
1100V grade ZHFR P.V.C. insulated
1100V grade
Supply & run of 3 of 6.0 Sqmm Supply & run of 3 of 6.0 NA 165.00 ONE RM
(84/0.3mm) (phase neutral and earth) Sqmm (84/0.3mm) (phase
FRLS / HFFR / ZHFR P.V.C. neutral and earth) FRLS /
insulated 1100V HFFR / ZHFR P.V.C.
insulated 1100V
Supply and run of No. 8SWG GI wire Supply and run of No. NA 7.00 ONE RM
8SWG GI wire
Supply and run of 25mmX6mm GI Supply and run of NA 91.00 ONE RM
strip 25mmX6mm GI strip
Supply and fixing of BH/SBH in lieu Supply and fixing of NA 10.00 EACH
of ceiling rose with 1 NO 3-5 W bulb BH/SBH in lieu of ceiling
rose with 1 NO 3-5 W bulb
Supply and transportation of 30 W Supply and transportation NA 2550.00 EACH
LED Street light of 30 W LED Street light
32,000
44,000
85,000
240,000
19,000
13,500
136,000
95,000
320,000
40,000
45,000
234,000
114,000
76,000
108,000
100,000
150,000
220,000
40,000
25,000
114,000
100,000
125,000
65,000
80,000.00
155,000
291,271.00
4,910
550.00
672
1,000
8,200
11,400
4,125
13,750
6,774
15,000
350
4,550
18,950
9,590
50
12,750
10,400.00
5,490
6,500
15,000
9,000
11,250
3,750
7,500
6,500
45,000
85,000
85,000
9,000
16,800
723,876
868,656
5,088,114
0
Quant
Description of Work
ity
16000 Supply and fixing of 25mm outer dia 2.20 mm thick Heavy Supply and fixing of Supply and fixing of
grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) 25mm outer dia 2.20 25mm outer dia 2.20
concealed in Roof Slabs with all required MS deep boxes mm thick Heavy gra mm thick Heavy gra
and all accessories including and labour charges etc.,
complete.
Makes : Precision/Universal& Marudhar/VIP /
GoldMedal /Million plast / GM / Sudhakar /Anchor/
Polyline/ Polycab/Orbit/AKG
11000 Supply and Fixing of 25mm outer dia Medium grade ( 1.8 Supply and Fixing of Supply and Fixing of
mm Thick ) with IS:9537 part 3 FRLS regid P.V.C. pipe (ISI 25mm outer dia 25mm outer dia
MARK) concealed in wall with all required MS Deep Boxes Medium grade ( 1.8 Medium grade ( 1.8
and all accessories including masonary work for light, fan mm Th mm Th
and separate plug point with MS modular switch box
including all labour charges etc., complete. for EPABX,
LAN, and CCTV, Run of mains, light, fan points.
Makes : Precision/Universal& Marudhar/VIP /
GoldMedal /Million plast / GM / Sudhakar /Anchor/
Polyline/ Polycab/Orbit/AKG
500 Supply and Fixing of 25mm outer dia thick surface P.V.C Supply and Fixing of Supply and Fixing of
pipe (ISI MARK) with all accessories fixing on chromium 25mm outer dia 25mm outer dia
plated metallic base saddles alllabour charges etc., thick surface P.V.C thick surface P.V.C
complete for run of mains pipe pipe
Makes : Precision/Universal& Marudhar/VIP /
GoldMedal / Million plast / GM /Sudhakar
/Polycab/Anchor/ Polyline/ Orbit/ AKG
475 Supply and erecting MS galvanished Fan hook box with Supply and erecting Supply and erecting
hook in RCC slab including all Labour charges etc., MS galvanished Fan MS galvanished Fan
complete. hook box with hook hook box with hook
in in
3020 Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / Wiring with 2 runs of Wiring with 2 runs of
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 22/0.3mm ( 1.5 22/0.3mm ( 1.5
/ 1990 specification flexible copper cable (ISI MARK) in Sq.mm) FRLS / Sq.mm) FRLS /
existing pipe with 6A Modular switch, Ceiling rose/BH/SBH HFFR / Z HFFR / Z
Modular switches with cover plate including all labour
charges etc., complete for Light, Fan, Exhaust Fan etc.,
complete. (for Non Residential Building)
12 Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / Wiring with 2 runs of Wiring with 2 runs of
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 22/0.3mm ( 1.5 22/0.3mm ( 1.5
/ 1990 specification flexible copper cable (ISI MARK) in Sq.mm) FRLS / Sq.mm) FRLS /
existing pipe with 6A Modular switch, Ceiling rose/BH/SBH HFFR / Z HFFR / Z
Modular switches with cover plate including all labour
charges etc., complete for Light, Fan, Exhaust Fan etc.,
complete in NON Residential Buildings for 2 way
Staircase Points
50 Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / Wiring with 2 of Wiring with 2 of
ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 22/0.3mm ( 1.5 22/0.3mm ( 1.5
specificationflexible copper cable (ISI MARK) in existing Sq.mm) FRLS / Sq.mm) FRLS /
pipe with 6A switch and 6A, 3/2 pin socket Modular type HFFR / ZHFR P HFFR / ZHFR P
with 6A switch control and MS boxes with cover plate fixing
on separate board including all labour charges etc.,
complete.
Makes of wires:- Finolex / RR kabel / Havells /KEI /
Gloster/ V-Guard/Bonton /Finecab/ HPL / GM / Million /
Goldmedal /Fortune Art / Sudhakar/Orbit/ Tamra/
Anchor/Plaza/Vihan/Ollvin
75 Supply and Fixing of 16 A/ 6A modular type power out Supply and Fixing of Supply and Fixing of
let6s with front cover plates with following configurations 16 A/ 6A modular 16 A/ 6A modular
1) 16A Socket - 1 nos. type power out let6s type power out let6s
2) 16A Switch - 1nos.
3) 6A socket - 2nos..
4) 6A Switch - 2nos.
Makes of wires:- Finolex / RR kabel / Havells /KEI /
Gloster/ Polycab / Bonton / V-Guard / GM / Million
/HPL / Goldmedal / Finecab /Fortune Art / Kundancab/
Sudhakar/ Orbit/ Standard/ Tamra/ Anchor
9000 Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / Supply and run of 1 Supply and run of 1
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 of 22 /0.3mm (1.5 of 22 /0.3mm (1.5
/ 1990 specification flexible copper cable in existing pipe for Sq.mm) FRLS / Sq.mm) FRLS /
earth continuity including all labour charges etc., complete. HFFR / HFFR /
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
15000 Supply and run of 3 of 22 /0.3mm (1.5 Sq.mm) FRLS / Supply and run of 3 Supply and run of 3
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 of 22 /0.3mm (1.5 of 22 /0.3mm (1.5
/ 1990 specification flexible copper cable in existing pipe for Sq.mm) FRLS / Sq.mm) FRLS /
mains continuity including all labour charges etc., complete. HFFR HFFR
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
13000 Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) Supply and run of 3 Supply and run of 3
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per of 2.5 sq.mm (phase of 2.5 sq.mm (phase
IS : 694 / 1990 specification flexible copper cable in neutral and earth) F neutral and earth) F
existing MS conduit pipe for individual ligting circuits
including labour charges etc., complete as required for
switch boards.
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
3500 Supply and 3 runs of 4.0 sq mm (phase neutral and earth) Supply and 3 runs Supply and 3 runs
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per of 4.0 sq mm (phase of 4.0 sq mm (phase
IS : 694 / 1990 specification flexible copper cable in neutral and earth) neutral and earth)
existing conduit pipe for run of mains including labour FR FR
charges etc., complete as required including labour
charges for 16A sockets.
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
1500 Supply & run of 3 of 6.0 Sqmm (84/0.3mm) (phase neutral Supply & run of 3 of Supply & run of 3 of
and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V 6.0 Sqmm 6.0 Sqmm
grade as per IS : 694 / 1990 specification flexible copper (84/0.3mm) (phase (84/0.3mm) (phase
cable in existing MS conduit pipe for run of mains including neutral and neutral and
labour charges etc. complete for AC points & SDB's etc as
required.
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
1600 Supply and run of 5 of 6 Sq mm (phases, neutral and earth) Supply and run of 5 Supply and run of 5
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per of 6 Sq mm (phases, of 6 Sq mm (phases,
IS : 694 / 1990 specification flexible copper cable in neutral and earth) F neutral and earth) F
existing MS conduit pipe for circuits including labour
charges etc. complete as required for run of mains from
Lighting panel board to TPN DB'S with pin type lugs and
connections. [for LDBs]
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
1600 Supply & run of 5 of 10.0 Sqmm (phases, neutral and Supply & run of 5 of Supply & run of 5 of
earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade 10.0 Sqmm (phases, 10.0 Sqmm (phases,
as per IS : 694 / 1990 specification flexible copper cable in neutral and earth) F neutral and earth) F
the existing conduict pipe for run of mains from Power
panel board to TPN DB"s with pin type lugs and
connections etc., complete. [for PDBs]
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
75 Supply and fixing single phase DB in sheet steel enclosure Supply and fixing Supply and fixing
with metallic plug and socket with 1 No. 20/32A,10KA 'c' single phase DB in single phase DB in
curve SPMCB (Motor characteristics MCBs) control sheet steel sheet steel
including making connections etc., complete concealing in enclosure w enclosure w
wall for A.C. points etc.
Makes : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro.
.
60 Supply and fixing of TPN 4 way distribution board IP-43 Supply and fixing of Supply and fixing of
(8+12 Module) Protection as per IS:13032 with provision to TPN 4 way TPN 4 way
accommodate the ELCB incomer and suitable for single distribution board IP- distribution board IP-
pole outgoing MCB's in sheet Steel enclosure with 32A 4 43 (8+ 43 (8+
pole MCB as incomer and 12 No of 6 to 32 Amps single
pole, 10 KA breaking capacity 'c' Curve MCB outgoings
including making connections etc., complete concealing in
wall. (LIGHTING DB's)
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro
60 Supply and fixing of TPN 4 way distribution board IP-43 Supply and fixing of Supply and fixing of
(8+12 Mofule) Protection as per IS:13032 with provision to TPN 4 way TPN 4 way
accommodate ELCB as incomer and suitable for single distribution board IP- distribution board IP-
pole outgoing MCB's in sheet Steel enclosure with 63 43 (8+ 43 (8+
Amps 4 pole MCB as incomer and 12 No of 6 to 32 Amps
single pole, 10 KA breaking capacity 'c' curve MCBs as
outgoings including making connections etc., complete
concealing in wall.
(POWER DB's)
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro
5 Supply and fixing of SPN 8 way distribution board IP-43 Supply and fixing of Supply and fixing of
Protection as per IS:13032 flushed in wall suitable for SPN 8 way SPN 8 way
single pole outgoing MCB's in sheet Steel enclosure with distribution board distribution board
40Amps DP MCB as incomer and 6 No of 6 to 32 Amps IP-43 Pro IP-43 Pro
single pole, 10 KA breaking capacity 'c' Curve MCBs as
outgoings including connections and labour charges etc.,
complete concealing in wall.
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro
10 Supply and fixing TPN - 8 way Vertical type Distribution Supply and fixing Supply and fixing
board with IP-43 Protection as per IS:13032 (Metal Door) TPN - 8 way Vertical TPN - 8 way Vertical
suitable to accommodate MCCB as incomer and type Distribution bo type Distribution bo
single/three pole MCBs as outgoings with 125A, 4Pole 25
kA MCCB as incomer with 6No of 40/63A, 10 KA TP MCBs
'c' curve and 6 No, 6-32A, 10 kA SP MCBs 'c' curve as
outgoing including making connections and labour charges
etc., complete concealing in wall.
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro
5 Supply and Installation of 63 Amps FP, MCCB, 25KA with Supply and Supply and
cable end boxes on suitable angle iron frame work for the Installation of 63 Installation of 63
areas mentioned in the drawings including all Labours Amps FP, MCCB, Amps FP, MCCB,
charges massonry work etc complete with connections. 25KA with cabl 25KA with cabl
Make: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
5 Supply and Installation of 125 Amps FP, MCCB, 25KA with Supply and Supply and
cable end boxes on suitable angle iron frame work for the Installation of 125 Installation of 125
areas mentioned in the drawings including all Labours Amps FP, MCCB, Amps FP, MCCB,
charges, massonry work etc. complete for finished item of 25KA with cabl 25KA with cabl
work.
Make: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
3 Supply and Installation of 250 Amps FP, MCCB, 25KA with Supply and Supply and
cable end boxes on suitable angle iron frame work for the Installation of 250 Installation of 250
areas mentioned in the drawings including all Labours Amps FP, MCCB, Amps FP, MCCB,
charges, massonry work etc. complete for finished item of 25KA with cabl 25KA with cabl
work.
Make: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
135 Supply and fixing of cable adopteres box with cover for Supply and fixing of Supply and fixing of
DBs including, massanory work etc., complete., cable adopteres cable adopteres
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager - box with cover for box with cover for
Novello+/ Seimens/Crabtree Xpro DBs DBs
classique-II/L&Tnewrange
10 Providing independent earthling by excavating a trench to a Providing Providing
depth of 2.5 M in all soils, as per size specified in the Data, independent independent
using 100mm dia Heavy gauge Flange C.I ( Cast iron ) earthling by earthling by
pipe of 2.5 Mtrs length with necessary accessories duly excavating a trench excavating a trench
providing staggered holes including filling with equal to a to a
proportion of Salt and Charcoal in layers and all labour
charges etc., complete.
10 Providing independent earthing for Important equipment Providing Providing
with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia independent independent
'B' class G.I pipe of 0.3mtr. long connected with reducer earthing for earthing for
providing G.I funnel with mesh enclosed in C.C.Chamber of Important equipment Important equipment
400m x 400m x 400mm with R.C.C. Slab cover duly with with
providing staggered 20mm holes filling with salt and
charcoal from the bottom of the pipe giving earth
connection from electrode through G.I strip of 40 x 6mm x
200mm length with all accessories and labour charges
complete, as per IS specifications 3043 /1987 (Part II)
500 Supply and run of No. 8SWG GI wire including cost of all Supply and run of Supply and run of
accessories and labour charges etc complete. No. 8SWG GI wire No. 8SWG GI wire
including cost of all including cost of all
acc acc
500 Supply and run of 25mmX6mm GI strip including cost of all Supply and run of Supply and run of
accessories and labour charges etc complete. 25mmX6mm GI strip 25mmX6mm GI strip
including cost of all including cost of all
ac ac
300 Supply and run of 50mmX6mm GI strip including cost of all Supply and run of Supply and run of
accessories and labour charges etc complete. 50mmX6mm GI strip 50mmX6mm GI strip
including cost of all including cost of all
ac ac
150 Supply and run of 25mmX3mm copper strip including cost Supply and run of Supply and run of
of all accessories and labour charges etc complete. 25mmX3mm copper 25mmX3mm copper
strip including cost strip including cost
of al of al
1780 Supply, Fixing and Transportation of 18W/20W, 1200mm Supply, Fixing and Supply, Fixing and
length LED batten light with extruded alluminium housing Transportation of Transportation of
and polycarbonate cover, input voltage AC 220 - 260 Volts 18W/20W, 1200mm 18W/20W, 1200mm
with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt length length
driver and frosted cover CCT: 3000K - 5700K, minimum
CRI>70, .etc., complete. with Fixing of 18W/20W LED
luminaire on wall / Ceiling with / TW round blocks with all
accessories including giving connections and all labour
charges etc., complete.
Makes: a) LUMINAIRE : Phillips / GE-Venture /
Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready / Surya /C&S/ Fortune Art / Syska /
Enrich / Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/
Orbit/Panasonic /Trinic /Lumens
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / EVERLIGHT.
4 Supply, Fixing and transportation of 90W LED HIgh Bay Supply, Fixing and Supply, Fixing and
Luminaire with high power COB LED made of pressure transportation of transportation of
diecast alluminium housing with powder coated,Supply 90W LED HIgh Bay 90W LED HIgh Bay
Input voltage 120 - 270 V AC, P.F > 0.90, high power Lumin Lumin
LED's having efficacy >100 lumines/watt, System efficacy
>95lm/W and junction temprature < 70°C, with Ingrees
protection IP66, IK05, Driver surge protection 4KV, external
Surge protection ≥ 5KV with wide/ Narrow beam optics,
THD<10% at 110 Volts AC, driver efficiency >90%, , CCT:
3000K - 5700K, minimum CRI>70, etc., complete with
suitable suspension arrangement including all labour
charges and conveyance of all materials etc complete with
wire leads and connections.
a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /
Crompton/ Bajaj /Greenlites /
Havells/Capart(Premium)
/Halonix/Polycab/Keselec/HPL/Jaquar/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG
230 Supply and Fixing of batten holder/angle holder on existing Supply and Fixing of Supply and Fixing of
block with 0.5W LED Lamp with input voltage 90 to 300V, batten holder/angle batten holder/angle
Colour temparature 3000k - 6500k, Beam angle 170 - 220 holder on existing holder on existing
degrees, B22 base and all labour charges etc., complete.
In lieu of ceiling rose.
Makes: Phillips /Crompton / Bajaj / Havells /
Halonix/GM/HPLSyska / Green Lites /
Fortune Art / GoldMedal /R LED/Luker/Leo/Orbit
200 Supply and fixing of BH/SBH in lieu of ceiling rose with 1 Supply and fixing of Supply and fixing of
NO 3-5 W bulb with connections etc., complete with labour BH/SBH in lieu of BH/SBH in lieu of
charges ceiling rose with 1 ceiling rose with 1
Makes: Phillips / Crompton / Bajaj / Surya / Style Lamp /
Capart
20 Supply and fixing of call bell on 6"x8" decolam block Supply and fixing of Supply and fixing of
including giving connections, cost of all accessories and call bell on 6"x8" call bell on 6"x8"
labour charges etc., complete. decolam block decolam block
Makes: GM G Home / Gold Medal Olive / Million Zoom / includ includ
Great white Omega/Koncept/Vimal opel/
Anchor/Vihan/CPL
10 Supply and fixing of buzzer on 4"x4" decolam block Supply and fixing of Supply and fixing of
including giving connections, cost of all accessories and buzzer on 4"x4" buzzer on 4"x4"
labour charges etc., complete. decolam block decolam block
Makes: GM G Home / Gold Medal Olive / Million Zoom / including including
Great white Omega/Koncept/Vimal opel/
Anchor/Vihan/CPL
10 Supply and fixing of Ding dong bell on 6"x8" decolam block Supply and fixing of Supply and fixing of
including giving connections, cost of all accessories and Ding dong bell on Ding dong bell on
labour charges etc., complete. 6"x8" decolam block 6"x8" decolam block
Makes: GM G Home / Gold Medal Olive / Million Zoom /
Great white Omega/Koncept/Vimal opel/
Anchor/Vihan/CPL
5 Supply and fixing of Electronic Music bell on 6"x8" decolam Supply and fixing of Supply and fixing of
block including giving connections, cost of all accessories Electronic Music bell Electronic Music bell
and labour charges etc., complete. on 6"x8" decolam on 6"x8" decolam
Makes: GM G Home / Gold Medal Olive / Million Zoom /
Great white Omega/Koncept/Vimal opel/
Anchor/Vihan/CPL
475 Supply and Transportation of 48" (1200mm) Sweep 5 star Supply and Supply and
rated Ceiling Fan , with double ball bearings, air delivery Transportation of Transportation of
more than 200 cubic meter/min but without Regulator. 48" (1200mm) 48" (1200mm)
Makes : Crompton HS Plus / Havells ES Neo/Orient Sweep 5 star rated Sweep 5 star rated
Energy Star/ Halonix(Zephyr) /Polycab(Synergy Star)
475 Supply and Fixing of modular Electronic step type fan Supply and Fixing of Supply and Fixing of
regulator hum free step type socket size with MS box, front modular Electronic modular Electronic
plate in the existing switch board ( Modular Type ) step type fan regula step type fan regula
475 Supply and erecting 19/20mm steel tube down rod of one Supply and erecting Supply and erecting
meter length with bolts & nuts duly painted with matching 19/20mm steel tube 19/20mm steel tube
colour of fan complete. down rod of one down rod of one
meter meter
475 Labour charges for Fixing of Ceiling fan including giving Labour charges for Labour charges for
connections with twin core wire etc., complete. Fixing of Ceiling fan Fixing of Ceiling fan
including giving including giving
100 Supply and Transportation of 12" (300mm) Light duty Supply and Supply and
exhaust fan with metalic blades and wire guard etc Transportation of Transportation of
complete. 12" (300mm) Light 12" (300mm) Light
Crompton / Bajaj Bahar WG / Havells Ventil Air- DB / duty exhaust duty exhaust
Orient hill air/Halonix /Polycab
95 Supply and Transportation of 12" (300mm) ISI, 900 RPM Supply and Supply and
Heavy duty exhaust fan with metallic blades with Mark. Transportation of Transportation of
Makes: Crompton / Almounard / Havells Turbo Force. 12" (300mm) ISI, 12" (300mm) ISI,
900 RPM Heavy 900 RPM Heavy
195 Labour charges for fixing of Exhaust fan in wall with Labour charges for Labour charges for
necessary connections and masonary work of making hole, fixing of Exhaust fan fixing of Exhaust fan
finishing etc., complete. in wall with necess in wall with necess
195 Supply and fixing of louver shutter suitable for 12" Exhaust Supply and fixing of Supply and fixing of
fan including all labour charges etc complete with louver shutter louver shutter
connections and colouring matching to the wall with enamel suitable for 12" suitable for 12"
paint. Exhaust Exhaust
18 Sub Power and Lighting Panels ( LHS & RHS ) Sub Power and Sub Power and
Supply, installation, testing and commissioning of wall/floor Lighting Panels Lighting Panels
mounting type panel board with alluminium bus bars ( LHS & RHS ) ( LHS & RHS )
fabricated with 16 Gauge CRCA Sheet comprising of TPN Supply, installa Supply, installa
bus bars of equal size in all phases and neutral equipped
with bus bar chambers and cable chambers.The bus bars
fault level shall be 50 KA and shall be as per the
requirement of local CEIG, fire regulations, CPRI norms
and other authorities etc. The painting of the complete
system shall be powder coated duly processing the panel
in 7 tank process. The panel shall be suitable for
accomdating the following switch gear including supply of
all components, hard wares etc including all necessary civil
works, adequate reinforcement, foundation bolts, suitable
G.I earth strip 50 x 6mm, door loop earthings, bus bars
should be colour sleeved with heat shrinkable sleeves for
phase and neutral duly supported at regular intervels by
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for [MAIN PANEL IN
ELECTRICAL ROOM
Panel shall be manufacture only from CPRI approval
Fabricators.
400A Aluminium Bus Bar with colour code.(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: 250A, 4 Pole, MCCB, 36/35 KA - 1 No.
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Metering Set:
0- 250A Digital Ammeter with selector switch . - 1 No.
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
0-500V Digital Volt meter with selector switch - 1 No.
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
100 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 300.00 Sq.mm.
100 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 240.00 Sq.mm.
100 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 185.00 Sq.mm.
100 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 150.00 Sq.mm.
100 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 120.00 Sq.mm.
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 95.00 Sq.mm.
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 70.00 Sq.mm.
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 50.00 Sq.mm.
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 35 Sq.mm.
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 25 Sq.mm.
500 Earth work excavation of Trench in hard ground soil, laying Earth work Earth work
of U.G cables on sand cusion covering the cable with bricks excavation of excavation of
and back filling of Trench duly providing route indicator (as Trench in hard Trench in hard
per general instruction S.No. 14 of SSR) embedded in C.C ground soil, laying ground soil, laying
including cost and conveyance of materials and labour
charges etc., complete.
1000 Labour charges for run of U.G cable on wall / existing pipe Labour charges for Labour charges for
with necessary fixing arrangments such as saddles, run of U.G cable on run of U.G cable on
clamps,wooden separators etc., (as directed by wall / existing pipe wall / existing pipe
departmental official) for the cables.
12 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
300 Sq.mm
12 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
240 Sq.mm
12 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
185.00 Sq.mm.
12 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
150.00 Sq.mm.
20 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
120.00 Sq.mm.
20 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
95.00 Sq.mm.
30 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
70.00 Sq.mm.
30 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
50.00 Sq.mm.
30 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
35 Sq.mm.
30 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
25 Sq.mm.
20 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
300 Sq.mm confirming confirming
20 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
240 Sq.mm confirming confirming
20 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
185.00 Sq.mm. confirming confirming
30 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
150.00 Sq.mm. confirming confirming
30 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
120.00 Sq.mm. confirming confirming
40 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
95.00 Sq.mm. confirming confirming
40 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
70.00 Sq.mm. confirming confirming
40 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
50.00 Sq.mm. confirming confirming
50 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
35 Sq.mm. confirming confirming
50 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
25 Sq.mm. confirming confirming
50 Supply,transporatation & installation of following sizes of Supply,transporatati Supply,transporatati
Hot Dipped Galvanized Iron perforated cable trays without on & installation of on & installation of
cover, including horizontal and vertical bends, reducers following sizes of following sizes of
tees,cross members and other accessories as required and
duly suspended from the ceiling/Wall with suspenders etc.,
complete
450mm x 50mm x 2.0mm
10 Supply and transportation of 30 W LED Street light Supply and Supply and
Luminaire made of pressure diecast alluminium body with transportation of 30 transportation of 30
powder coated, having protective toughned glass, Supply W LED Street light W LED Street light
Input voltage 120 - 270 V AC, P.F > 0.90, high power Luminaire Luminaire
LED's having System efficacy > 100 lm/W and junction
temprature < 70°C, with Ingrees protection IP66, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), Driver
surge protection 4KV, external Surge protection 10 KV with
optics distribution , THD<10% at 110 Volts AC, driver
efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70,
etc., complete
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) / GE-Venture / rompton(Hawk/Nexus star) / Bajaj
(Edge) / Halonix(Lumos - Super) / Havells (Endura
Pearl) /Capart(Premium)/Greenlites(Hi-Lux)
/Polycab/Keselec/ HPL(City Vision)/
Jaquar(Premium)/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG
10 Supply and transportation of 60 W LED Street light Supply and Supply and
Luminaire made of pressure diecast alluminium body with transportation of 60 transportation of 60
powder coated, having protective toughned glass, Supply W LED Street light W LED Street light
Input voltage 120 - 270 V AC, P.F > 0.90, high power Luminaire Luminaire
LED's having System efficacy > 100 lm/W and junction
temprature < 70°C, with Ingrees protection IP66, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), Driver
surge protection 4KV, external Surge protection 10 KV with
optics distribution , THD<10% at 110 Volts AC, driver
efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70,
etc., complete
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) / GE-Venture / rompton(Hawk/Nexus star) / Bajaj
(Edge) / Halonix(Lumos - Super) / Havells (Endura
Pearl) /Capart(Premium)/Greenlites(Hi-Lux)
/Polycab/Keselec/ HPL(City Vision)/
Jaquar(Premium)/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG
20 fixing of LED / MV / SV/ MH luminaire on wall with 1.0Mtr fixing of LED / MV / fixing of LED / MV /
of 40mm dia GI pipe bracket and anti tilting MS Flat with SV/ MH luminaire on SV/ MH luminaire on
2.5 Sq.mm flexible copper wire etc.,including all labour wall with 1.0Mtr o wall with 1.0Mtr o
charges for mason work and giving connections etc.,
complete.
1000 Supply and laying of RG6 co-axial cable in the existing Supply and laying of Supply and laying of
metallic/non metallic conduit pipe with connections RG6 co-axial cable RG6 co-axial cable
etc.,complete for TVs and CCTV Net work. in the existing meta in the existing meta
Makes: Finolex/ Million / Gold Medal / Anchor / Polycab
10 Supply and fixing of TV outlet Modular type in existing MS / Supply and fixing of Supply and fixing of
modular box with modular front cover plate with screws TV outlet Modular TV outlet Modular
connections etc., complete. type in existing MS / type in existing MS /
Makes: Legrand Arteor / Schneider Zen celo/ Crabtree
Murano or Amare/L&T-englaze/
GM-Zenova/Goldmedal(i- Push)
20 Supply and laying of B class GI pipe of ISI mark with Supply and laying of Supply and laying of
bends, collars and other accessories of following sizes B class GI pipe of B class GI pipe of
including trench work for laying the cable. ISI mark with bends, ISI mark with bends,
40 mm dia G.I Pipe
( SSR -19-20- - 8.4.15 d +Overheads&Contractors Profit
@13.615% )
30 Supply and Laying NP2 class RCC hume pipe with bends, Supply and Laying Supply and Laying
Collars and other accessores of following siges including NP2 class RCC NP2 class RCC
trench excavation for laying the same with RCC incsing hume pipe with hume pipe with
around. bends, Collar bends, Collar
300 mm
2 Supply and fixing of water cooler fully stainless steel of Supply and fixing of Supply and fixing of
capacity 60/120 to be operated on single phase supply with water cooler fully water cooler fully
ISI mark. stainless steel of stainless steel of
Makes Blue star / Voltas / Usha.
50 Supply, instalation, testing and commisioning Supply, instalation, Supply, instalation,
of ........Amp, ........KA breaking capacity (100% Neutral testing and testing and
busbar) air insulated compact Raising mains/Bus Duct commisioning commisioning
system made of CRCA sheet/Hot Galvanized steel of ........Amp of ........Amp
encloser of thickness not less than 0.8 mm having degree
of protection of IP 55 as per IEC/EN 61439-6,
PVC/Plastic insulated reinforced with glass fibre four strip
ALUMINIUM busbar in convinent sections including
necessary end cover units suitable for 415 volts 3 phase, 4
wire, 50 Hz A.C. System,etc.,with necessary joints Fire
barrrier at each floor Provision of tapping at each
floor/every meter,continuous earthing with 2 nos alluminium
strip of suitable size (one on each side0 including GI
clamping brackets,angle iron brackets,steel
fastners,connecting to earth system as required .
Makes: Legrand (Zucchini) / C&S/Advance-Anant
400Amp, 50 - 53KA
10 Supply and Fixing of Spring Bracket with fixing kit for Supply and Fixing of Supply and Fixing of
400Amps, Air Insulated Busduct / Raising Mains. Makes: Spring Bracket with Spring Bracket with
Legrand (Zucchini) / C&S/Advance-Anant fixing kit for 400 fixing kit for 400
400Amp, 50 - 53KA
10 Supply and fixing of Flange end for 400Amps for Air Supply and fixing of Supply and fixing of
insulated Busdusts . Makes: Legrand (Zucchini) / Schiender Flange end for Flange end for
/C&S/Advance-Anant 400Amps for Air 400Amps for Air
400Amp, 50 - 53KA insula insula
30 Supply and Fixing of Supply and Fixing of
Supply and Fixing of 125Amps Tap off box for Air 125Amps Tap off 125Amps Tap off
Insulated Busduct. box for Air Insulated box for Air Insulated
Makes: Legrand (Zucchini) / C&S/Advance-Anant
2 Supply and Fixing of Adjustable, Confirms to IEC 60947-2 Supply and Fixing of Supply and Fixing of
and IS 13947-Part 1&2 having Breaking Capacity with Adjustable, Confirms Adjustable, Confirms
thermal magnetic release Panel Mounted. to IEC 60947-2 and to IEC 60947-2 and
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
250A 4 Pole MCCB,36/35 KA
2 Supply and Fixing of Adjustable, Confirms to IEC 60947-2 Supply and Fixing of Supply and Fixing of
and IS 13947-Part 1&2 having Breaking Capacity with Adjustable, Confirms Adjustable, Confirms
thermal magnetic release Panel Mounted. to IEC 60947-2 and to IEC 60947-2 and
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
400A 4 Pole MCCB,36/35 KA
5500 Supply and laying of 2 pair telephone wire 0.5mm copper Supply and laying of Supply and laying of
in the existing metallic/non metallic conduit pipe with 2 pair telephone 2 pair telephone
connections etc., complete. wire 0.5mm copper wire 0.5mm copper
Makes: Finolex / Delton / Surabi / Polycab in in
180 Supply and fixing of 2 Line telephone jack socket model Supply and fixing of Supply and fixing of
modular type with connector front and back plate in existing 2 Line telephone 2 Line telephone
modular box with screws connections etc., complete. jack socket model jack socket model
Makes: Legrand Arteor / Schneider Zen celo/ Crabtree modu modu
Murano or Amare/L&T-englaze/
GM-Zenova/Goldmedal(i- Push)
4 Supply, Installation, Testing and commissioning of Digital Supply, Installation, Supply, Installation,
key Telephone instruments with at least of 16 Testing and Testing and
programmable keys, LCD display, fully hands fee etc., commissioning of commissioning of
complete with connectors. Digital k Digital k
Makes: NEC/ Alcatel /Avaya/Seimens
180 Supply, Installation, Testing and commissioning of Non Supply, Installation, Supply, Installation,
caller ID push button Telephone instruments etc., Testing and Testing and
complete with connectors. commissioning of commissioning of
Make : Beetel / NEC/ Alcatel /Avaya/Seimens. Non call Non call
2 Supply, Installation, Testing and commissioning of IP Supply, Installation, Supply, Installation,
Gateway Card and SIP Extension License ( IP Extensions Testing and Testing and
8 ) etc., complete. commissioning of IP commissioning of IP
Gatewa Gatewa
2 Supply and fixing of 16 Port Analog Extension Module etc., Supply and fixing of Supply and fixing of
complete. 16 Port Analog 16 Port Analog
Makes : NEC/ Alcatel /Avaya/Siemens Extension Module Extension Module
etc., c etc., c
2 Supply and fixing of 200 pair MDF krone pair box with MS Supply and fixing of Supply and fixing of
enclosure with lock and key arrangement etc complete with 200 pair MDF krone 200 pair MDF krone
all labour charges. pair box with MS pair box with MS
Makes: Krone or its equivalent. enc enc
2 Supply and fixing of 50 pair MDF krone pair box with MS Supply and fixing of Supply and fixing of
enclosure with lock and key arrangement etc complete with 50 pair MDF krone 50 pair MDF krone
all labour charges. pair box with MS pair box with MS
Makes: Krone or its equivalent. encl encl
5 Supply and fixing of 20 pair MDF krone pair box with MS Supply and fixing of Supply and fixing of
enclosure with lock and key arrangement etc complete with 20 pair MDF krone 20 pair MDF krone
all labour charges. pair box with MS pair box with MS
Makes: Krone or its equivalent. encl encl
5 Supply and fixing of 10 pair MDF krone pair box with MS Supply and fixing of Supply and fixing of
enclosure with lock and key arrangement etc complete with 10 pair MDF krone 10 pair MDF krone
all labour charges. pair box with MS pair box with MS
Makes: Krone or its equivalent. encl encl
1 Supply, Installation, Testing and commissioning of ISDN Supply, Installation, Supply, Installation,
PRI Card. Make: Karel, Mofel: EX 200(IS2/0) Testing and Testing and
commissioning of commissioning of
ISDN PRI ISDN PRI
500 Supply and laying of 10 pair telephone wire 0.5mm copper Supply and laying of Supply and laying of
in the existing metallic/non metallic conduit pipe with 10 pair telephone 10 pair telephone
connections etc.,completeTelephone wire wire 0.5mm copper wire 0.5mm copper
Makes: Finolex / Delton / Surabi / Polycab. in in
500 Supply and laying of 20 pair telephone wire 0.5mm copper Supply and laying of Supply and laying of
in the existing metallic/non metallic conduit pipe with 20 pair telephone 20 pair telephone
connections etc.,completeTelephone wire wire 0.5mm copper wire 0.5mm copper
Makes: Finolex/Delton/ Surabi/ Polycab. in in
300 Supply and laying of 50 pair telephone wire 0.5mm copper Supply and laying of Supply and laying of
in the existing metallic/non metallic conduit pipe with 50 pair telephone 50 pair telephone
connections etc.,completeTelephone wire wire 0.5mm copper wire 0.5mm copper
Makes: Finolex/Delton/ Surabi/ Polycab. in in
250 Supply and Fixing installation testing and commisioning Supply and Fixing Supply and Fixing
of1no of Cat6 Tooless builtin crimping mechanism installation testing installation testing
Information Outlet with Dust Cover Exceed ANSI/TIA-568- and commisioning and commisioning
C.2 and ISO/IEC 11801 standards with 1module face plate of1n of1n
for Category 6 component performance & Compatible to
T568A,T568B wiring pattern and UL-940V0 Rated Plastic
&RoHS Compliant
Makes: Systimax /AMP/ Panduit/ Siemond/
Molex/Legrand
7500 Supply,laying ,testing and commisioning of 4-pair, Cat6 Supply,laying ,testin Supply,laying ,testin
Solid (Third party ETL Intertek tested 600 MHZ above) to g and commisioning g and commisioning
support 1Gbps with Cross (+) filler pair seperator & PVC of 4-pair, Cat6 Soli of 4-pair, Cat6 Soli
sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA-
568-C.2 and UL Listed &RoHS Compliant in the existing
raceways /pvc conduits including making connections to
information outlets and patch panels with ferruling at both
ends for identifiation with necessary tools for punching
stripping crimping and testing required etc., complete
Makes: Systimax /AMP/ Panduit/ Siemond/
Molex/Legrand
12 Supply and Fixing, Installation, Testing and Comissioning Supply and Fixing, Supply and Fixing,
of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis , Installation, Testing Installation, Testing
powder coated Modular Patch Panels (upgradable to and Comissioning of and Comissioning of
intelligent panels with use of sensor strips) with collapsible
shutters on jacks to support latest ammendments of TIA /
EIA Cat 6 Specifications in Existing Communication Rack
along with necessory connections of Cat 6 UTP Cables,
With Rear Cable management trays and clamps.
1) 24 Ports Patch Panels
Makes: Systimax
/Legrand/Molex/Panduit/Siemond/AMP
10 Supply and Fixing, Installation, Testing and Comissioning Supply and Fixing, Supply and Fixing,
of Wall mounted Communication rack in two sections viz Installation, Testing Installation, Testing
rear wall mount Section and hinged front section with glass and Comissioning o and Comissioning o
doors, swing handles ,lock , Top and Bottom Cable
entries,Supports for mounting rack on wall , Cable
managers, Fan tray with 2 x 230 Volt fans, Equipment
mounting hardware, wire managers , power supply box for
supplying power to hubs, fans etc along with earth
continuity kit, Mcb, indicator, moulded power supply cable,
Blank panels , sliding shelves etc.
1) 15 U(44 mm ) wall mounted
Make: APW/HCL/Valrack/Netrack
12 Supply and Fixing, Installation ,Testing and Commissioning Supply and Fixing, Supply and Fixing,
of Small Installation ,Testing Installation ,Testing
Business 24 port Gigabit Managed Switch , and Commissioning and Commissioning
Make :Cisco Model SG350-28 or equivalent in o o
Juniper/Extreme
20 Supply and installation testing and commissioning of 15 Supply and Supply and
Watt column speaker (Makes: Philips/eqvt) including cost installation testing installation testing
all taxes etc complete for finished item of work as directed and commissioning and commissioning
by the engineer-in-charge. of 15 Watt of 15 Watt
5 Supply of wire less Hand Held Microphone with receiver Supply of wire less Supply of wire less
Model No: PVD-57 ( H) etc. Hand Held Hand Held
Make : Mega. Microphone with Microphone with
receiver Model receiver Model
1500 Supply and laying of shielded twin twisted pair 1.0 sqmm Supply and laying of Supply and laying of
cable in existing conduit. shielded twin twisted shielded twin twisted
pair 1.0 sqmm cab pair 1.0 sqmm cab
4 Supply, installation, testing and commissioning of 120W Supply, installation, Supply, installation,
amplifiers for public addressing system suitable for testing and testing and
operation on 230V, 50 Hz single phase Ac supply including commissioning of commissioning of
all labour charges etc., complete., 120W ampl 120W ampl
20 Supply and Fixing of Focus Wall Speaker - 30 watts Supply and Fixing of Supply and Fixing of
including labour charges etc., complete. Focus Wall Speaker Focus Wall Speaker
Make: Ahuja - WB - 330T/PHILIPS /Mega. - 30 watts includin - 30 watts includin
4 Supply and Fixing of Paging Microphone including labour Supply and Fixing of Supply and Fixing of
charges etc., complete. Paging Microphone Paging Microphone
Make: Ahuja - ACM - 66/PHILIPS /Mega. including labour ch including labour ch
4 Testing and commissioning of the Public Address system Testing and Testing and
commissioning of commissioning of
the Public Address the Public Address
system system
10 Supply, Transportation, Installation, Testing and Supply, Supply,
Commissioning of split AC unit with high wall mounted Transportation, Transportation,
indoor unit and outdoor condencing unit Hermetically Installation, Testing Installation, Testing
sealed compressor suitable for operation on 230V, 50Hz, and Commission and Commission
1Phase AC supply capable of performing cooling
dehumidifying air circulating and filtering with cooling and
condensing units with 3 mts of copper piping, insulation kit
and 4 mts of 3 core copper flexible cable including cordless
remote control etc.
1.5 TR 3 Star capable of delivering 18000 BTU / hr and
above with operating on refrigerant R-32 / R-410A
Makes: Blue Star 3HW18VCTU / Daikin FTE-M or N
Sereis / Hitachi / Voltas / Carrier Superia.
10 Supply and fixing of ISI mark (IS:15683) Mono ammonium Supply and fixing of Supply and fixing of
phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored ISI mark (IS:15683) ISI mark (IS:15683)
pressure type, pressure gauge, gross wt. 9.4 kg, empty Mono ammonium Mono ammonium
wt.3.4 kg, Discharge time minimum 13 sec, controllable phosp phosp
discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating -4 A, B
rating -34 B, can construction: Deep drawn and Co2 mig
welding, Valve construction: Forging & Machining, internal
coating of can: Epoxy powder coating, External coating of
Can:Epoxy polyster powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5
years warranty Including transportation, all taxes and all
labour charges etc complete.
Makes: Safex / Kenex / Bharat / Reliance/NewTech
( SSR - 19-20, Item NO: 9.4.8 +Overheads&Contractors
Profit @13.615% )
20 Supply, installation, Testing and commissioning of IP Bullet Supply, installation, Supply, installation,
Camera as per the specifications as follows:- Testing and Testing and
* 2 Megapixel 1/2.8" SONY 2MP High-resolution CMOS commissioning of IP commissioning of IP
Sensor Bullet Bullet
* Fixed Lens 3.6mm 2.0 focal length
* Video Process H.264 Standard compression, supply Dual
stream adjustable 50K~8M,1-25PFS
* Video Resolution 1920 × 1080
* Dual streaming
* Camera should be POE ( Power Over Ethernet)
* Camera should support ONVIF
* Built in IR cut filter with auto switch
* Ingress Protection rating should be IP65
* IR range should be upto 30 Meters
* Network protocol:
TCP/UDP/HTTP/MULTICAST/UPnP/NTP/RTSP/Onvif/FTP
* Should Support WEB,OSD,Real-time video
transmission, support motion detection and IO Alarm;
Linkage front-end storage/snap, supporting the front store,
support the motion detecting and IO alarm linkage center
alerts and screen after
Makes: Pelco/Travizia/Honeywell/RGP/Axies/Tyco.
1 Supply, installation, testing and commissioning of 6-Bay Supply, installation, Supply, installation,
Network Attached Storage (NAS) with 6X4TB HDD testing and testing and
Makes: Seagate/Netgear/Toshiba commissioning of 6- commissioning of 6-
Bay Ne Bay Ne
3 Supply, fixing, testing and commissioning of 8 port Supply, fixing, Supply, fixing,
10/100/1000 + 2 SFP combo port L2 smart managed testing and testing and
switch. commissioning of 8 commissioning of 8
Make: D-Link/Netgear/Cisco port 10/100/ port 10/100/
18 Supply, fixing, testing and commissioning of Single mode Supply, fixing, Supply, fixing,
SFP module. testing and testing and
Make: D-Link/Netgear/Cisco. commissioning of commissioning of
Single mode SF Single mode SF
12 Supply and Fixing of 6 Port Fiber distribution unit (FDU/LIU) Supply and Fixing of Supply and Fixing of
loaded with couplers etc. with labour charges, professional 6 Port Fiber 6 Port Fiber
charges, giving connections etc., complete. distribution unit distribution unit
Make: D-Link/ Molex/ AMP/Legrand/ Krone. (FDU/LIU (FDU/LIU
80 Supply and Fixing of SC Duplex Couplers Supply and Fixing of Supply and Fixing of
SC Duplex Couplers SC Duplex Couplers
175 Supply, fixing and termination of pigtails for fiber Supply, fixing and Supply, fixing and
connectivity. Make: D-Link/Molex/AMP/ Legrand/ Krone termination of termination of
pigtails for fiber pigtails for fiber
connect connect
1000 Supply and run of 6 core (Indoor/Out Door), Single mode Supply and run of 6 Supply and run of 6
armoured Optical Fiber Cable in existing PVC conduit core (Indoor/Out core (Indoor/Out
including all labour charges, professional charges, etc., Door), Single mode Door), Single mode
complete as directed by engineer in charge. armo armo
Make: D-Link/AMP/ Molex/ Legrand/ Krone
25 Supply and Fixing of Subscriber connector (SC) to SC/LC Supply and Fixing of Supply and Fixing of
patch cord of 1 Meter length. Subscriber Subscriber
Make: D-Link/ Molex/ AMP/ Legrand/Krone connector (SC) to connector (SC) to
SC/LC patc SC/LC patc
200 Labour Charges for Optical Fiber Cables Splicing in Labour Charges for Labour Charges for
professional manner. Optical Fiber Cables Optical Fiber Cables
Splicing in professi Splicing in professi
850 Supply,laying ,testing and commisioning of 4-pair, Cat6 Supply,laying ,testin Supply,laying ,testin
Solid (Third party ETL Intertek tested 600 MHZ above) to g and commisioning g and commisioning
support 1Gbps with Cross (+) filler pair seperator & PVC of 4-pair, Cat6 Soli of 4-pair, Cat6 Soli
sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA-
568-C.2 and UL Listed &RoHS Compliant in the existing
raceways /pvc conduits including making connections to
information outlets and patch panels with ferruling at both
ends for identifiation with necessary tools for punching
stripping crimping and testing required etc., complete
Makes: Systimax /AMP/ Panduit/ Siemond/
Molex/Legrand
1 Supply and Fixing, Installation, Testing and Comissioning Supply and Fixing, Supply and Fixing,
of Wall mounted Communication rack in two sections viz Installation, Testing Installation, Testing
rear wall mount Section and hinged front section with glass and Comissioning o and Comissioning o
doors, swing handles ,lock , Top and Bottom Cable
entries,Supports for mounting rack on wall , Cable
managers, Fan tray with 2 x 230 Volt fans, Equipment
mounting hardware, wire managers , power supply box for
supplying power to hubs, fans etc along with earth
continuity kit, Mcb, indicator, moulded power supply cable,
Blank panels , sliding shelves etc.
1) 15 U(44 mm ) wall mounted
Make: APW/HCL/Valrack/Netrack
1 Supply and Fixing of 55" Full HD LED for side Audience, As Supply and Fixing of Supply and Fixing of
1920 x 1080 (16:9) resolution & 170°/160°(H/V) viewing 55" Full HD LED for 55" Full HD LED for
angale, with HDMI & VGA Interface etc., complete., side Audience, As 1 side Audience, As 1
Makes: Samsung/Panasonic/LG
1 Supply and Fixing of Celing Mount Kits for front LED etc., Supply and Fixing of Supply and Fixing of
complete. Celing Mount Kits Celing Mount Kits
(Make: Customs) for front LED etc., c for front LED etc., c
20 Supply and fixing of 32 x 20 mm DLP PVC Mini-trunking Supply and fixing of Supply and fixing of
with independent cover on wall/ ceiling including cost of all 32 x 20 mm DLP 32 x 20 mm DLP
accessories like end caps, Internal/External angles, flat PVC Mini-trunking PVC Mini-trunking
Angles, flat joints etc., with all labour charges, transportaion with i with i
etc., complete.
Make: Legrand/ Modi/ Honeywell
20 Supply and fixing of 105/100 x 50 mm DLP PVC Trunking Supply and fixing of Supply and fixing of
with flexible cover on wall/ ceiling including cost of all 105/100 x 50 mm 105/100 x 50 mm
accessories like end caps, Internal/External angles, flat DLP PVC Trunking DLP PVC Trunking
Angles, flat joints etc., with all labour charges, transportaion with f with f
etc., complete.
Make: Legrand/ Modi/ Honeywell
350 Manufacture, Supply, & Delivery of HDPE Pipes OD 25mm Manufacture, Manufacture,
dia, PE-100 grade, 16 Kg/Sq. cm, conforming to IS 4984 - Supply, & Delivery Supply, & Delivery
1995 including transportation to any where in A.P, of HDPE Pipes OD of HDPE Pipes OD
excluding excise duty, sale tax and specials etc., complete. 25mm dia, P 25mm dia, P
(supply upto 90 mm dia in coil & above 90 mm dia straight
length in 6 m)
400 Laying, jointing of PVC/HDPE pipes of sizes 25mm dia as Laying, jointing of Laying, jointing of
per BIS No.7634 part-III/75 for PVC and BIS No.7634 part- PVC/HDPE pipes of PVC/HDPE pipes of
II/75 for HDPE pipes including trench excavtion and refiling. sizes 25mm dia as sizes 25mm dia as
per per
5 Supply installation Testing and commissioning of .......... Supply installation Supply installation
KVA on line UPS system as per IEC 62040-I(Safety) ,IEC Testing and Testing and
62040-3(Performance) for critical IT solutions ,fully digital commissioning commissioning
IGBT Converter and Inverter ,with Internal /External of .......... of ..........
isolation transformer from DC to AC, PWM, pure sine wave
out put, double conversion ,output pf 0.9, with parallelling
facility , standard communicaton features/options auto and
manual static by pass switch three phase input / Three
phase output. Accoustic level shall be less than 58dB at 1
mtr distance.
Makes: Numeric /APC / Consul Neowatt / Sakshham /
Emerson
10.0 KVA 312/360 V DC
( SSR -19-20 - 11.1.3 a +Overheads&Contractors Profit
@13.615% )
60 Supply and fixing of 12V 120/130 AH SMF battery with 3 Supply and fixing of Supply and fixing of
years warrenty including wire leads,connections etc 12V 120/130 AH 12V 120/130 AH
complete., SMF battery with 3 SMF battery with 3
Makes: Quanta / Racket / Exide. years years
( SSR -19-20 - 11.1.13 +Overheads&Contractors Profit
@13.615% )
5 Supply and providing of battery rack upto 11 to 20 Supply and Supply and
batteries (42 AH) providing of battery providing of battery
rack upto 11 to 20 rack upto 11 to 20
batteries batteries
3 SITC of following OUTDOOR CONDENSING UNITS- SITC of following SITC of following
INVERTER type suitable to operate upto 52°C ambient OUTDOOR OUTDOOR
temperature with minimum one variable speed inverter CONDENSING CONDENSING
scroll compressor. Matching air cooled condenser with UNITS-INVERTER UNITS-INVERTER
copper tubes and aluminium fins duly covered by anti- type s type s
corrosion and hydrophillic resin film. Scroll compressors
suitable for operation with R-410A.. Unit with all necessary
safety devices like high/low pressure cut-outs, fan motor
thermal overload protector, over current/low current safety,
fuses etc. Suitable for operation on
380V~415V~3Ph~50Hz A.C. supply. Oil separator and
Accumulator to be provided for inverter compressors.
24HP (14TR actual capacity at 45 deg. C ambient)
APPROVED MAKE : Bluestar / Voltas / Thosibha/ Daikin
SITC of double skin horizontal floor mounted air handling SITC of double skin SITC of double skin
unit of recirculation type having mixing box with fresh air & horizontal floor horizontal floor
return air manually operated AL dampers. Fresh air inlet mounted air mounted air
should have back draft dampers along with AL manually handling un handling un
operated fresh air dampers. Units shall be with minimum
80mm GI base channel. The panel thickness should be
46+/-2mm having thermal break AL profile. Outer skin of
the unit should be 0.6mm pre-coated GI sheet & Inner skin
should be 0.8mm AL. All internal blank off should be GI.
Filter section with 90% efficiency down to 10 micron pre-
filter box type followed by 95% efficiency down to 5 micron
Microvee filter in a separate filter frame. Cooling coil
section should be 6 or 8 Row Deep Direct Expansion
intertwining cooling coil compatible for Bluestar/voltas/
Thosibha/Daikin outdoor unit. Fin thickness should be
0.15mm & fin spacing should be 12 FPI. Coil casing
should be GI & fin shall be with standard fin material. Coil
shall be 18G SS-304 drain pan with 13mm thick closed cell
nitrile rubber insulations. Unit shall be ultra violet lamp to
kill germs/fungus. Heater section should be with 4kW
electric strip heater in 2 banks.
3 Fan section should be SISW direct driven plug fan with a Fan section should Fan section should
minimum efficiency of 65%. Motors should be IE-2, TEFC be SISW direct be SISW direct
squirrel cage induction type with IP-55 protection, 415V, driven plug fan with driven plug fan with
3Phase & 50Hz. Motor drive should be VFD. VFD drive a mi a mi
should be included in AHU supply. Fan should be housed
over the spring isolator. Unit should be supplied with
manually operated AL dampers. The AHu package should
include Electronic expansion valves compatable to
condensing units, Temperature sensor/controller
compatable to inverter drive, communication cables from
AHU to condensing unit
APPROVED MAKE:
1. FAN – KRUGER / ZIEHL-ABEGG
2. MOTORS – ABB/SIEMENS/BBL
3. FILTERS – CAMFIL/THERMADYNE
4. VFD DRIVE - DANFOSS / ABB
5. AHU - EDGE TECH / ZRCO/ CITIZEN/ BOOPATHY
2 Supply and installation of powder coated linear supply air Supply and Supply and
grilles/Preforated sheets with VCD & Plenum box installation of installation of
.APPROVED MAKE : Cosmic / System air / carry air powder coated powder coated
/Equivalent linear supply air g linear supply air g
2 Supply and installation of powder coated return air grilles Supply and Supply and
APPROVED MAKE : Cosmic / System air / installation of installation of
carry air / Equivalent powder coated powder coated
return air grille return air grille
3 Supplying and installation of Aluminium Volume control Supplying and Supplying and
dampers with flanges for mounting on branch ducts and installation of installation of
units etc complete. Aluminium Volume Aluminium Volume
APPROVED MAKE : Cosmic / System air / carry air / control dampe control dampe
Equivalent
2 Supply and installation of fusible link mechanical Fire safety Supply and Supply and
dampers according to NFPA 90A and UL 555. The casings installation of fusible installation of fusible
and blades of fire dampers shall be constructed of zinc- link mechanical Fire link mechanical Fire
coated steel of at least 1.9 mm thickness. safe safe
30 Supply and installation of Refrigerant Copper piping Supply and Supply and
insulated with Nitrile Rubber Tubular insulation with installation of installation of
13/19mm thickness Refrigerant Copper Refrigerant Copper
7/8 inches OD piping insulat piping insulat
30 Supply and installation of Refrigerant Copper piping Supply and Supply and
insulated with Nitrile Rubber Tubular insulation with installation of installation of
13/19mm thickness Refrigerant Copper Refrigerant Copper
1/2 inches OD piping insulat piping insulat
30 Supply and fixing of Rectangular G.I ducting complete Supply and fixing of Supply and fixing of
with angel flanges, high tech supports, curves & bends Rectangular G.I Rectangular G.I
where indicated for easy flow of air and ensured to be ducting complete ducting complete
air tight by applying silicon or any adhesive after with a with a
fabrication as per approved drawing as per standard
practice Approved Makes:TATA/ Jindal
22 Gauge
30 Supply and fixing of Rectangular G.I ducting complete Supply and fixing of Supply and fixing of
with angel flanges, high tech supports, curves & bends Rectangular G.I Rectangular G.I
where indicated for easy flow of air and ensured to be ducting complete ducting complete
air tight by applying silicon or any adhesive after with a with a
fabrication as per approved drawing as per standard
practice Approved Makes:TATA/ Jindal
20 Gauge
30 Supply and installation of Thermal insulation with 25mm Supply and Supply and
thick Nitrile rubber/ XLPE with Aluminum cladding fixed to installation of installation of
the external surface of ducts with suitable adhesives as Thermal insulation Thermal insulation
recommended by manufacturers. (for exposed ducts) with 25mm thic with 25mm thic
APPROVED MAKE: K- flex / Supreme /Paramount / Arma
flex.
30 Supply and installation of Thermal insulation with 19mm Supply and Supply and
thick Nitrile rubber/ XLPE faced with Aluminum foil fixed to installation of installation of
the external surface of duct with Al foilceds with suitable Thermal insulation Thermal insulation
adhesives as recommended by manufacturers. with 19mm thic with 19mm thic
APPROVED MAKE: K- flex / Supreme /Paramount / Arma
flex.
1 Supply & Erection of 18G Aluminium Backdraft Dampers at Supply & Erection of Supply & Erection of
inlet of AHU unit Approved Makes: Airmaster, Systemair, 18G Aluminium 18G Aluminium
carryair. Backdraft Dampers Backdraft Dampers
at inle at inle
20 Supply and Fixing of Supply and Fixing of
Supply and Fixing of 2 mm thick Hard PVC drain piping
2 mm thick Hard 2 mm thick Hard
with suitable supports as required & insulated with 6mm
PVC drain piping PVC drain piping
thick Nitrile rubber insulation Approved Makes: Sudhakar,
with s with s
Supreme.
40 mm Dia
25 Supply and Fixing of Armoured Electrical cable Supply and Fixing of Supply and Fixing of
Interconnecting between AHU unit and out door units for Armoured Electrical Armoured Electrical
Condensing Units as per standards Approved Makes: cable Interconnecti cable Interconnecti
Finolex, Fine cab.(3.5Core x 35 Sqm)
200 Supply & Fixing of MS structural support for mounting of Supply & Fixing of Supply & Fixing of
Floor mounted AHU with 50 x 50 x 5 mm angle finished MS structural MS structural
with Epoxy painting as per standard practice support for mounting support for mounting
of Flo of Flo
80 Supply and Fixing of Modular OT Wall and Ceiling Supply and Fixing of Supply and Fixing of
Paneling: Wall & Ceiling with PPGI Panel Having 50 mm Modular OT Wall Modular OT Wall
thick with PUF (Polyurethane Foam) and thickness not and Ceiling and Ceiling
less than 0.6 mm thick in room side and 0.6 mm thick in Paneling: W Paneling: W
wall side having density of 40 Kg / M3. Including of all joints
with silicon sealant. Make: Tata/ Jindal
55 Supply and Laying of Coving : Supply and installation of Supply and Laying Supply and Laying
Aluminium Extruded profiles with 1.50mm thick. Coving has of Coving : Supply of Coving : Supply
executed as male and female. Gemale coving with "V" and installation of and installation of
Groove for clip grip for male & supporting at wall to ceiling, Alu Alu
wall to wall & wall to floor. Male coving with clip on type
power coated / PPGI Nickel - Chrome Anodizing radius - R
70. to avoid dust accumulation at 90 deg. places like wall to
floor, wall to wall & wall to ceiling. Make :- Sumangalam /
Zindal.
wall to wall and wall to ceiling
15 Supply and application of epoxy coving of light green or Supply and Supply and
light blue colour with SIKA brand with 50mmX50mmwidth application of epoxy application of epoxy
at the corners of the walls including cost and conveyance coving of light green coving of light green
of all materials and labour charges etc.,complete for or lig or lig
finished item of work for Operation Theatres wall to flooring
and wall to wall.(Make
:Cipy/SIKHA/ARDEX/STRIDEX/TARKET)
22 Supply and Fixing of Epoxy Flooring: Seamless with Supply and Fixing of Supply and Fixing of
perfectly curved resistance and dynamic loads and having Epoxy Flooring: Epoxy Flooring:
conductive protection characteristics, 3 mm thick, washable Seamless with Seamless with
Epoxy flooring and Before apply epoxy apply ESD self perfectly perfectly
leveling - eletrotape copper foil / Copper grounding strips
(0.05 mm thick, 50mm width) is used to create ground
grids for peel and stic ESD flooring and ESD matting also
ESD primer,screading and topping for self leveling
(Make :Cipy/SIKHA/ARDEX/STRIDEX/TARKET)
15 Supply and application of epoxy flooring of light green or Supply and Supply and
light blue colour in Operation Theatres - Epoxy seamless application of epoxy application of epoxy
joint free finish with 3mm thickness and anti slip & water flooring of light flooring of light
washable chemical resistance durable and non particle green or l green or l
shedding with attractive finishing including cost and
conveyence of all materials and all labour charges etc.,
complete for finished item of work.
Make : Cipy/SIKHA/ARDEX/STRIDEX/TARKET)
3 Supply and Fixing of Pass Box SS 304 (Size: 2’*2’) can be Supply and Fixing of Supply and Fixing of
provided in operation theatre to remove waste materials Pass Box SS 304 Pass Box SS 304
from the operation theatres to Dirty linen area just adjacent (Size: 2’*2’) can be (Size: 2’*2’) can be
to Operation Theatre. Pass Box is equipped with two doors pr pr
and the door shall operate electronically. The Pass Box is
designed in such a way that only one door should be
opened at one time. The UV light shall be installed in
chamber. Make: CZS /BLS / SS 304 Zindal
3 Supply and Fixing of Two Plate X-Ray Viewing Screen Supply and Fixing of Supply and Fixing of
designed to provide a high level of control luminance Two Plate X-Ray Two Plate X-Ray
without flicker. Size - 950 x 650 x 115 mm (Make : Viewing Screen Viewing Screen
Mediconz International - Country of Origin -India , designe designe
Srimodular / CZS / Altos)
3 Supply and Fixing of Writing Board of size 950 x 650 x 75 Supply and Fixing of Supply and Fixing of
mm with 50 mm thick and consealed in wall panelling Writing Board of size Writing Board of size
( Make : CZS /BLS / Altos / Srimodular / Mediconz or 950 x 650 x 75 mm 950 x 650 x 75 mm
equavalent)
30 Supply and application of poly urethene (P.U) of light green Supply and Supply and
or light blue colour with 1mm thickness with anti fungal and application of poly application of poly
anti bacterial chemical resistance durable and non particle urethene (P.U) of urethene (P.U) of
shedding including cost and conveyance of all materials light green light green
and labour charges etc., complete for finished item of work
in Operation Theatre walls and ceilings
15.6 Providing & Fixing of Scientific Doors with metal door Providing & Fixing of Providing & Fixing of
frames and door shutters made of galvanize steel (base Scientific Doors with Scientific Doors with
steel as per IS 513 of 0.58 mm thick D quality, galvanized metal door frame metal door frame
as per IS 277 with Zinc of 120 GSM). coated with Zinc
Phosphate Primer to receive any paint on site or finished
with Thermosetting Polyurethane paint of Aliphatic Grade
providing high levels of scratch resistance and
durability/Epoxy polyester powder for powder coating paint
thickness 50-60 microns (Dry film thickness) outer frame
section of 100 x 58 mm x 1.2 mm thick, shutter section of
0.80 mm thick galvanized steel sheet pressed (roll formed)
for 46mm thick fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb Kraft paper used
to give the required rigidity and effective acoustic insulation
with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10”
Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Lock of
approved quality – 1 No, frames fixed to the
concrete/masonry wall by means of self expanding screws
including etc., complete for finished item of work for Double
leaf Door
3 Supply and Fixing of Surgucal Scrub: Surgical scrub sink Supply and Fixing of Supply and Fixing of
should be designed for use in OT complex providing Surgucal Scrub: Surgucal Scrub:
Surgeons with a convenient sink for pre – OT scrub up. Surgical scrub sink Surgical scrub sink
Each fixture should be fabricated with 18 SWG gauge type sho sho
304 stainless steel and should be seamless welded
construction, polished to a stain finish. The scrub sink
should be provided with a water controlled value, waste
connections, stoppers and strainers. 4 Feet Length and 3
Feet Hight with 2 Foot operated and 2 elbow taps should
be there.
Make : Zindal/ Tata
3 Supply and Fixing of Surgeon Double Arm Pendant - Supply and Fixing of Supply and Fixing of
Comprising of Surgeon Double Surgeon Double
- 1 x Arm 800 & 1 x Arm 800 having a Arm Pendant - Arm Pendant -
- 1 x drop tube having a carrying capacity of maximum Comprising Comprising
load of 80 kg
-Rotation of 330 deg.
- 1 x Basic Console - 750 mm
- 1 x Fixed shelf (350x350x50 mm)
- 1 x Adjustable shelf (350x350x50mm)
- 6 x Mains Socket (5/15Amp)
- 6 x Medical Gas Terminal & Hose Assembly
(2 x Oxy, 2xVac, 1xAir(4bar), 1xAir(7bar), 1xN2O, 1xCO2,
Provision for CO2 Data & A/V 2 nos.)
Make : Meditech / Altos / Aravali / Digiline or Equqalent)
3 Supply and Fixing of Anesthesia Single Arm Pendant - Supply and Fixing of Supply and Fixing of
Comprising of Anesthesia Single Anesthesia Single
- 1 x Arm 800 mm having a Arm Pendant - Arm Pendant -
- 1 x drop tube having a carrying capacity of maximum Compris Compris
load of 80 kg
-Rotation of 330 deg.
- 1 x Basic Console - 600 mm
- 1 x Fixed shelf (350x350x50 mm)
- 1 x Adjustable shelf (350x350x50mm)
- 6 x Mains Socket (5/15Amp)
- 6 x Medical Gas Terminal & Hose Assembly
(2 x Oxy, 2xVac, 1xAir(4bar),1xAir 7 Bar,1x N20 , Provision
for
AGSS, Data & A/V 2 nos.)
( Make : Meditech / Altos / Aravali / Digiline or Equqalent)
3 Supply and Fixing of SS/GI Perforated air Grills with AL Supply and Fixing of Supply and Fixing of
VCD as per standard practice. Approved Makes: Airmaster, SS/GI Perforated air SS/GI Perforated air
Systemair, carryair or equavalent Grills with AL VCD Grills with AL VCD
3 Supply Instalation, testing and commissioning of 60 to 100 Supply Instalation, Supply Instalation,
degrees F heat Thermostat including making connections testing and testing and
and soldering etc, complete. commissioning of 60 commissioning of 60
Make: Honey Well / Johnson / Siemanes to 100 d to 100 d
3 Supply, Instalaltion, testing and commissioning of 0 to 100 Supply, Instalaltion, Supply, Instalaltion,
RH pressure guage Humidistate including making testing and testing and
connections and soldering etc, complete. commissioning of 0 commissioning of 0
Make : Honey Well / Johnson / Siemanes to 100 to 100
3 Supply, Instalaltion, testing and commissioning of Pressure Supply, Instalaltion, Supply, Instalaltion,
sensor for VDF including making connections and soldering testing and testing and
etc, complete. commissioning of commissioning of
Make : Honey Well / Johnson / Siemanes Pressure Pressure
6 Supply, Supply,
Transportation and Transportation and
fixing of 36W/40W fixing of 36W/40W
Supply, Transportation and fixing of 36W/40W (600mm (600mm x 600mm) (600mm x 600mm)
x 600mm) LED Slim Panel Round /Square suitable for
Recessed / Surface mounting made of diecast
alluminium body with powder coating, acrylic diffuser
with Driver, operating voltage range of 150 to 265 Volts
AC, P.F > 0.9, Surge protection: 2KV,THD<10%, with
high power LED's having efficacy of > 120
lumins/watt,CCT: 3000K - 5700K, minimum
CRI>70, .etc., complete a) LUMINAIRE MAKE : Phillips /
GE / Crompton / Wipro / Bajaj / Havells / VIN / Renesola
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG. (ELEC-3.9.4 h)
In side OT's
3 Supply and Supply and
Transportation of Air Transportation of Air
Supply and Transportation of Air cooled VRV / VRF Air cooled VRV / VRF cooled VRV / VRF
Conditioning system of having high COP complete with Air Condit Air Condit
indoor and outdoor units duly charged with refrigerant
R-410A and oil (first charge) suitable for cooling with
individual controller, (suitable for 415 +/- 10% for
outdoor and 230 +/- 5% for indoor units) and complete
with all accessories, fittings etc. The units shall be
BMS Compatible. Outdoor Units shall be fully inverter
system complete with 100% scroll/rotary compressor
and drive arrangement, initial charge of refrigerant (R-
410A),refrigerant piping, drier, sight glass, dual
pressure cutout all housed and supported properly in
cabinet, air cooled condenser & its controller for
following capacities. The VRV system shall be cooling
only system.
Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung
Type of Compressor : Hermitic sealed Inverter
Scroll/Twin Rotary
ODU should delvier the required capacity at the
ambient conditions of the place as per ISHRAE
Standards. The System should be highly energy
efficient and COP shall not be less than 3.7. The
outdoor units shall be suitable for operation between 5
and 53 deg C in cooling mode
a) 20.0 HP ( OUT DOOR UNITS)
3 Lifting, shifting, positioning, Installation and testing of the Lifting, shifting, Lifting, shifting,
ODUs including all accessories with Vibration Isolators for positioning, positioning,
ODUs etc., complete -OUT DOOR UNITS Installation and Installation and
testing of testing of
3 Lifting Shifting, Lifting Shifting,
Lifting Shifting, Positioning ,Installation Testing and Positioning ,Installati Positioning ,Installati
commissioning of the following indoor units with on Testing and on Testing and
including all required accessoires etc complete., comm comm
Type Of Units :Hi Wall Units
1.0 TR to 2.0 TR - INDOOR UNITS
100 Supply and Fixing of the following 2 mm thick Hard Supply and Fixing of Supply and Fixing of
CPVC drain piping with suitable supports as required & the following 2 mm the following 2 mm
insulated with 6mm thick Nitrile rubber thick Hard CPVC thick Hard CPVC
insulationApproved Makes: Sudhakar, Supreme or dra dra
equavalent
a) 25 mm
10 Supply and Fixing of the following 2 mm thick Hard Supply and Fixing of Supply and Fixing of
CPVC drain piping with suitable supports as required & the following 2 mm the following 2 mm
insulated with 6mm thick Nitrile rubber thick Hard CPVC thick Hard CPVC
insulationApproved Makes: Sudhakar, Supreme or dra dra
equavalent
b) 32 mm
25 Supply and Installation of Multi Connection Joint / Ref Nets Supply and Supply and
for IDUs Installation of Multi Installation of Multi
Connection Joint / Connection Joint /
Ref Nets Ref Nets
3 Supply and Installation of Multi Connection Joint / Ref Nets Supply and Supply and
for ODU connections- AT OUT DOOR UNITS Installation of Multi Installation of Multi
Connection Joint / Connection Joint /
Ref Nets Ref Nets
1 Supply, installation, testing and commissioning of wall/floor Supply, installation, Supply, installation,
mounting type panel board with alluminium bus bars testing and testing and
fabricated with 16 Gauge CRCA Sheet comprising of TPN commissioning of commissioning of
bus bars of equal size in all phases and neutral equipped wall/floo wall/floo
with bus bar chambers and cable chambers.The bus bars
fault level shall be 50 KA and shall be as per the
requirement of local CEIG, fire regulations, CPRI norms
and other authorities etc. The painting of the complete
system shall be powder coated duly processing the panel
in 7 tank process. The panel shall be suitable for
accomdating the following switch gear including supply of
all components, hard wares etc including all necessary civil
works, adequate reinforcement, foundation bolts, suitable
G.I earth strip 50 x 6mm, door loop earthings, bus bars
should be colour sleeved with heat shrinkable sleeves for
phase and neutral duly supported at regular intervels by
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for Panel shall be
manufacture only from CPRI approval Fabricators.
400A Aluminium Bus Bar with colour code.(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: 250A, 4 Pole, MCCB, 35/36 KA - 1 No.
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Metering Set:
0- 250A Digital Ammeter with selector switch . - 1
No.Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
0-500V Digital Volt meter with selector switch - 1 No. Make:
Conzerve /Elmeasure/ Meco/ HPL/ L&T/ socomec
R, Y, B Indication lamps of LED type - 3 Nos.
Makes: L&T / C&S / SALZAR / HPL .
250/5A C.T coils - 3 Nos.
100 Supply and Supply and
Supply and transportation of following XLPE insulated,
transportation of transportation of
1100V grade armoured alluminium cable as per
following XLPE following XLPE
specification confirming to IS:7098 (Part - I)./1554-I
insulated, 1100V insulated, 1100V
Make: Torent / Universal / Unicab / Havells / KEI / Gloster /
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 25 Sq.mm. - HVAC Panel to Out Door Units
10 Supply and making Supply and making
one end termination one end termination
Supply and making one end termination with heavy duty
with heavy duty with heavy duty
double compression brass gland as per BS 6121:2005 ,IP
double double
66 complete,SIBG type, heavy duty Alluminium lugs duly
crimped with crimping tool, PVC tape etc for following size
of Armoured PVC insulated & PVC sheathed/ XLPE
3.5 Core 25 Sq.mm. - HVAC Panel AND Out Door Units
100 Labour charges for run of U.G cable on wall / existing pipe Labour charges for Labour charges for
with necessary fixing arrangments such as saddles, run of U.G cable on run of U.G cable on
clamps, wooden separators etc., (as directed by wall / existing pipe wall / existing pipe
departmental official) for eath connections for the cables.
2 20 Passenger Bed - cum Lift ( 5 stops for Hospital 20 Passenger Bed - 20 Passenger Bed -
Building.) ( Lower Ground Floor + Upper Ground + 1st cum Lift ( 5 stops cum Lift ( 5 stops
+2nd + 3rd Floor ) for Hospital Buildin for Hospital Buildin
Supplying, installation, commissioning, testing, putting into
operation and handing over of the gear less Passenger
Bed cum lift ( 20 Persons / 1360 Kgs.) capacity in the
available shaft travelling at a speed of 1.25 metre/second
suitable for operation on 415 volts , 3 phase, 50 cycles /
second, AC supply complete with AC Variable voltage, VF,
microprocessor based collective operation with / without
attenFant, automatic power operated doors (16 SWG
Stainless steel car doors and landing doors) car control
panels indication in car and door and landings on SS face
plate as specified, safety devices i.e., Fireman's service
and control, battery charged emergency alarm system,
emergency light in the car. Infra Red door protection
device including scaffolding for errection of the lift, minor
building works, cement concrete / RCC foundation grouting
etc., for equipments in machine room, lift shaft, lift pit etc.,
and ladder in the lift pit etc., complete as required with 2
years waranty period.
Make: JHONSON / KONE / OTIS / SCHINDLER /
MITSUBUSHI.
I) No. of elevators - 1
ii) Type & Capacity : Gearless Passenger bed cum lift of 20
Persons ( 1360 Kgs.)
iii ) Speed Approximately : 1.25 m/sec
iv) Type of Drive: Micro Processor Based VVVF
v) Location of Machine Room: Above Lift well
vi) Travel / Pit / Head room : 12.0 metres(Approx.), .
vii) Serving: Lower Ground Floor + Upper Ground + 1st
+2nd + 3rd Floor, 5 stops, 5 levels, 5 openings.
Number and Position of Car Entrances : 1 (ONE), IN
FRONT ONLY
Position Of Machinery : DIRECTLY ABOVE THE LIFT
WELL -GEARLESS
Size of Lift Well : 2400 X 3000 (MM Wide * MM Depth)
1 250 KVA Generator Set with AMF: 250 KVA Generator 250 KVA Generator
Supply Installation Testing And commissioning of 250 KVA Set with AMF: Set with AMF:
DG Set complete with 1500 RPM Diesel Engine of Supply Installation Supply Installation
suitableBHP & AC Brush less SPDP Alternator mounted on Testing Testing
a common base Frame & coupled through a flexible
coupling or close coupled.
Engine Makes:Caterpillar/Cummins/Koel Green
Alternator Make:Leroy somer/Crompton Greaves/Stamford
Alternator: It shall be self regulated, self excited and
confirms to IS: 13364/1992 or latest version with regulation
of +5% from No load to full load, IP23, with standard
Alternator Protection( Over voltage, over speed & under
voltage).
Diesel Engine: It shall have residential silencer, up to 10 M
exhaust piping , electronic / Mechanical governor, Manual
& electric Start, Batteries, Fuel tank ( with Stand) & piping,
control panel (16 G) with MCCB (4P; 25 KA), Ammeter,
Voltmeter, Frequency Meter, Energy Meter & Hour Meter,
Engine instruments panel and AVM. The diesel engine
shall be capable of providing 10% over load for 1 Hr for
every 11 Hrs of continuious running at full load. Accoustic
Enclosure: Weatherproof, powder coated Accoustic
enclosure for DG set for sound attenuation fabricated from
1.6 mm CRCA sheet steel (structure) with side wall
fabricated from 1.6 mm CRCA sheet and filled with foam as
per CPCB norms latest amendments & IS 8183 .The doors
are fabricated from 1.6 mm CRCA sheet packed with
accoustic material, floor of MS chequrred plate 5.0
mmthick, All doors/ opening are ealed with neoprene/
EPDN gaskets..
1 Supply Installation Testing and Commissioning of AUTO Supply Installation Supply Installation
MAINS FAILURE (AMF) Panel with IP 52 protection, Testing and Testing and
fabricated from CRCA sheet steel 2mmThick , Powder Commissioning of Commissioning of
coated finish , Engine START & STOP commands,control AUTO MAINS AUTO MAINS
RELAYS, selector switches for Ammeter & Voltmeter,
Ammeter & Voltmeter , Control & Power Contactors,
Timers, Electronic Hooter ,Visual & Alarm indication for
faults, UPS, operator interface panel complete in all respect
suitable for following capacity DG sets:
250 KVA Generator Set AMF:
26 Supplying and fixing of hose cabinet of size 750mm X Supplying and fixing Supplying and fixing
600mm x 250mm made of No 16 gauge SWG CRCA sheet of hose cabinet of of hose cabinet of
with 6mm thick glazed glass door including necessary size 750mm X size 750mm X
locking arrangement suitable to accommodate 2 Nos 15 600mm x 600mm x
mtr long Hose pipe, 1 No branch pipe, mounted on wall OR
raised brick platform and duly painted with Post office red
externally and white internally with synthetic enamel paint
complete in all respect, for external hydrant as required.
Makes:Minimax/Safex/Newage/Winco/Padmini/
NewTech
52 Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe Supplying and fixing Supplying and fixing
with 63mm dia Male and Female Gun metal / SS couplings 63mm dia, 15 mtr 63mm dia, 15 mtr
duly binded with GI wire, rivets etc conforming to IS 636 long RRL hose pipe long RRL hose pipe
(Type -A) as required. Makes: Newage/ Winco/ Padmini / wit wit
Safex / Minimax/NewTech
a) Gun metal
26 Supply and fixing 63mm dia Gun metal branch pipe with Supply and fixing Supply and fixing
20mm (Nominal internal diameter) size Gun metal / SS 63mm dia Gun 63mm dia Gun
nozzle conforming to IS 903, suitable for instantaneous metal branch pipe metal branch pipe
connection to interconnect hose pipe coupling as required. with 20mm ( with 20mm (
Makes: Newage/ Winco/ Padmini / Safex /
Minimax/NewTech
a) Gun metal
26 Supplying and fixing First -Aid Hose Reel with MS Supplying and fixing Supplying and fixing
construction spray painted in Post office Red, Conforming First -Aid Hose Reel First -Aid Hose Reel
to Is 884 with upto date amendments, complete with the with MS constructi with MS constructi
following as required.
a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose
Thermoplastic / Textile reinforced / Rubber braided /
Polypropylene Type - 2 as per IS:12585
Makes: Reliance/ Newage/
Safex/NewTech/Winco/Minimax
b) 20mm (Nominal internal) dia gun metal globe valve and
nozzle.
Makes:NEU-G/SANT / Safex.
c) Drum and brackets for fixing the equipments on wall.
d) Connections from riser with 25mm dia stop valve (gun
metal) & MS pipe.
50 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
150mm dia
50 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
80 mm dia
100 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
25 mm dia
1 Supplying, fixing, testing and commissioning of butterfly Supplying, fixing, Supplying, fixing,
valve PN 1.6, with Bronze / Gun metal seat duly ISI marked testing and testing and
complete with Nuts, Bolts, Washers, gaskets, conforming to commissioning of commissioning of
IS 13095 of following sizes as required. butterfly va butterfly va
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / SANT/NEU-G
250 mm dia
5 Supplying, fixing, testing and commissioning of butterfly Supplying, fixing, Supplying, fixing,
valve PN 1.6, with Bronze / Gun metal seat duly ISI marked testing and testing and
complete with Nuts, Bolts, Washers, gaskets, conforming to commissioning of commissioning of
IS 13095 of following sizes as required. butterfly va butterfly va
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / SANT/NEU-G
150mm dia
5 Supplying, fixing, testing and commissioning of butterfly Supplying, fixing, Supplying, fixing,
valve PN 1.6, with Bronze / Gun metal seat duly ISI marked testing and testing and
complete with Nuts, Bolts, Washers, gaskets, conforming to commissioning of commissioning of
IS 13095 of following sizes as required. butterfly va butterfly va
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / SANT/NEU-G
150mm dia
10 Supplying, fixing, testing and commissioning of butterfly Supplying, fixing, Supplying, fixing,
valve PN 1.6, with Bronze / Gun metal seat duly ISI marked testing and testing and
complete with Nuts, Bolts, Washers, gaskets, conforming to commissioning of commissioning of
IS 13095 of following sizes as required. butterfly va butterfly va
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / SANT/NEU-G
100mm dia
10 Supplying, fixing, testing and commissioning of butterfly Supplying, fixing, Supplying, fixing,
valve PN 1.6, with Bronze / Gun metal seat duly ISI marked testing and testing and
complete with Nuts, Bolts, Washers, gaskets, conforming to commissioning of commissioning of
IS 13095 of following sizes as required. butterfly va butterfly va
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / SANT/NEU-G
80 mm dia
10 Supply and fixing air vessel made of 250 mm dia, 8 mm Supply and fixing air Supply and fixing air
thick MS sheet, 1200mm in height with air release valve on vessel made of 250 vessel made of 250
top and flanged connection to riser, drain arrangement with mm dia, 8 mm thick mm dia, 8 mm thick
25mm dia Gun metal wheel valve, with required
accessories, pressure gauge and painting with synthetic
enamel paint of approved shade as required.
1000 Supply, fabricating , installing structural steel supports for Supply, fabricating , Supply, fabricating ,
fixing all sizes of MS pipes from ceiling / wall with MS installing structural installing structural
Channels, Angles, Flats, Rods, as required at site with steel supports f steel supports f
anchor fasteners, Clamps, threaded rods, nuts,
bolts,washers etc complete with painting.
200 mm dia
30 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
150mm dia
75 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
100mm dia
100 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
80 mm dia
150 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
25 mm dia
100 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 50 Sq.mm.
500 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
4.0 Core 16 Sq.mm.
100 Earth work excavation of Trench in hard ground soil, laying Earth work Earth work
of U.G cables of size up to 70 Sqmm on sand cusion excavation of excavation of
covering the cable with bricks and back filling of Trench Trench in hard Trench in hard
duly providing route indicator (as per general instruction ground soil, laying ground soil, laying
S.No. 14 of SSR) embedded in C.C including cost and
conveyance of materials and labour charges etc.,
complete.
500 Labour charges for run of U.G cable on wall / existing pipe Labour charges for Labour charges for
with necessary fixing arrangments such as saddles, run of U.G cable on run of U.G cable on
clamps,wooden separators etc., (as directed by wall / existing pipe wall / existing pipe
departmental official) for the cables.
100 Supply and Transportation of XLPE/PVC insulated & PVC Supply and Supply and
sheathed unarmoured control cables of 1.1 KV grade with Transportation of Transportation of
copper conductor as per IS 7098 Part-I -1988 etc complete XLPE/PVC insulated XLPE/PVC insulated
Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/ & PVC sheath & PVC sheath
Gloster/ orbit
/ Paragon/ RR Kabel/ RPG
12C x 2.5 sq.mm
500 Supply and Transportation of XLPE/PVC insulated & PVC Supply and Supply and
sheathed unarmoured control cables of 1.1 KV grade with Transportation of Transportation of
copper conductor as per IS 7098 Part-I -1988 etc complete XLPE/PVC insulated XLPE/PVC insulated
Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/ & PVC sheath & PVC sheath
Gloster/ orbit
/ Paragon/ RR Kabel/ RPG
2C x 1.5 sq.mm
10 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
35 Sq.mm
10 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
25 Sq.mm
20 S&fixing of heavy duty flange type brass cable glands of S&fixing of heavy S&fixing of heavy
following sizes for PVC armoured cables with brass duty flange type duty flange type
washers, earth tag etc complete including all labolur brass cable glands brass cable glands
charges. of fol of fol
up to 16 Sq.mm
10 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
50Sq.mm confirming confirming
10 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
35Sq.mm confirming confirming
10 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
25 Sq.mm confirming confirming
100 Supply and fixing of crimping type Aluminium lugs Supply and fixing of Supply and fixing of
confirming to IS specifications for following cables including crimping type crimping type
nuts and bolts with connections. Aluminium lugs Aluminium lugs
16 Sq.mm confirming confirming
100 Supply and fixing of crimping type Copper lugs confirming Supply and fixing of Supply and fixing of
to IS specifications for following cables including nuts and crimping type crimping type
bolts with connections. Copper lugs Copper lugs
confirming to confirming to
up to 16 sq.mm
30 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
250mm dia
50 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
200mm dia
50 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
150mm dia
100 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
100mm dia
150 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
80 mm dia
150 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
65mm dia
200 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
50mm dia
200 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
40 mm dia
200 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
32mm dia
200 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
25 mm dia
700 Providing fixing, testing and commissioning of 15mm size Providing fixing, Providing fixing,
quartzoid bulb type sprinklers of rating 68º C. pendent / testing and testing and
side wall with required accessories. commissioning of commissioning of
Makes: HD / TYCO / VIKING / NEWAGE/ SHARP / SAFEX 15mm size qua 15mm size qua
a) Pendant
150 Providing fixing, testing and commissioning of 15mm size Providing fixing, Providing fixing,
quartzoid bulb type sprinklers of rating 68º C. pendent / testing and testing and
side wall with required accessories. commissioning of commissioning of
Makes: HD / TYCO / VIKING / NEWAGE/ SHARP / SAFEX 15mm size qua 15mm size qua
b) Side wall
10 Providing and fixing Flow Switches in 150 mm dia MS pipe. Providing and fixing Providing and fixing
Makes : System Sensor / Switzer /Honeywell Flow Switches in Flow Switches in
150 mm dia MS 150 mm dia MS
pipe. pipe.
M M
50 Supply and instllation of intallegent analogue addressable Supply and Supply and
photo electric smoke detector including cost of base plate instllation of instllation of
etc., complete as per specification with required fittings and intallegent analogue intallegent analogue
accessories. addressable p addressable p
Makes: Notifier / Edwards/ Bosch
50 Supply and installation of response indicators for above Supply and Supply and
false ceiling detectors. installation of installation of
response indicators response indicators
for above fal for above fal
4 Supply and installation of intallegent analogue addressable Supply and Supply and
rate of rise cum fixed temparature heat detectors including installation of installation of
the cost of base plate. 75mm dia MS outlet box for fixing of intallegent analogue intallegent analogue
the detector base, mounting addressable addressable
accessories etc., complete as per specifications and as
required.
Makes: Notifier / Edwards /Bosch
1200 Supply and Transportation of XLPE/PVC insulated & PVC Supply and Supply and
sheathed unarmoured control cables of 1.1 KV grade with Transportation of Transportation of
copper conductor as per IS 7098 Part-I -1988 etc complete XLPE/PVC insulated XLPE/PVC insulated
Make: Torrent / Universal / Unicab / Havells / KEI & PVC sheath & PVC sheath
/Polycab/Gloster/orbit
/Paragon/RR Kabel/RPG
3 C x 1.5 sq.mm
4 Supply and Installation of Intalligent analogue addressable Supply and Supply and
Control Modules including the cost of mounting accessories Installation of Installation of
complete as per pecifications Intalligent analogue Intalligent analogue
and as required. addressable addressable
Makes: Notifier / Edwards /Bosch
20 Supply and installation of duel tone electronic hooter of Supply and Supply and
85dB including the cost of mounting accessories complete installation of duel installation of duel
as per specifications and as required. tone electronic tone electronic
Makes: System Censor / Ravel/Vertex hooter of 85 hooter of 85
20 Supply and installation of dust and vermin proof manual Supply and Supply and
call point to initiate audio visual alarm including the cost of installation of dust installation of dust
mounting accessories complete as per specifications and and vermin proof and vermin proof
as required. manual call manual call
Makes: System Censor / Ravel/Vertex
2 Supply, Installation, testing and commissioning of Supply, Installation, Supply, Installation,
conventional Micro processor testing and testing and
based Fire Alarm panel with ……., 12V SMF batteries etc., commissioning of commissioning of
complete with all conventio conventio
standard accessories.
Makes: System Censor / Ravel/Vertex
a) 12 ZONE
1000 Supply and Transportation of XLPE/PVC insulated & PVC Supply and Supply and
sheathed unarmoured control cables of 1.1 KV grade with Transportation of Transportation of
copper conductor as per IS 7098 Part-I -1988 etc complete XLPE/PVC insulated XLPE/PVC insulated
Make: Torrent / Universal / Unicab / Havells / KEI & PVC sheath & PVC sheath
/Polycab/Gloster/orbit
3 C x 1.5 sq.mm
25 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg Supply and fixing of Supply and fixing of
capacity confirming to IS 2878 made from ISI marked Co2 type Fire Co2 type Fire
steam less cylinder confirming to IS:7285 & CE certified Extinguishers 4.5 Kg Extinguishers 4.5 Kg
and fitted with ISI marked controlled valve confirming to capa capa
IS:3224, high pressure 1 Mtr discharge hose & horn
complete with initial gas charged with carrying handle with
wheels and wall mounting bracket. Squeeze lever
discharge, used un-used indicator, Aphoxy coated paint
(Red) with 93% gloss with 2 years warranty Including
transportation, all taxes and all labour charges etc
complete.
Makes: Cease Fire / Minimax
( SSR - 19-20, Item NO: 9.4.13 +Overheads&Contractors
Profit @13.615% )
25 Supply and fixing of ISI mark (IS:15683) Mono ammonium Supply and fixing of Supply and fixing of
phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored ISI mark (IS:15683) ISI mark (IS:15683)
pressure type, pressure gauge, gross wt. 9.4 kg, empty Mono ammonium Mono ammonium
wt.3.4 kg, Discharge time minimum 13 sec, controllable phosp phosp
discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating -4 A, B
rating -34 B, can construction: Deep drawn and Co2 mig
welding, Valve construction: Forging & Machining, internal
coating of can: Epoxy powder coating, External coating of
Can:Epoxy polyster powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5
years warranty Including transportation, all taxes and all
labour charges etc complete.
Makes: Cease Fire / Minimax
( SSR - 19-20, Item NO: 9.4.7 +Overheads&Contractors
Profit @13.615% )
60 Supply and fixing of Escape signage boards in Rigid Photo Supply and fixing of Supply and fixing of
luminecent based glow in Dark rigid sheet with high Escape signage Escape signage
intensity luminous properties with specificaiton. boards in Rigid boards in Rigid
Makes: Cease Fire or its equivalent make Model-1ES01 Photo lu Photo lu
36 Supply & Fixing of Powder Coated Fire Rated doors, Supply & Fixing of Supply & Fixing of
frames & shutters made of Skin pass galvanized Iron sheet Powder Coated Fire Powder Coated Fire
conforming to Base Steel as per IS 513 “D” Quality, Rated doors, frames Rated doors, frames
Galvanized as per IS 277 with Hot Zinc Coating of 120 & &
grams / Sq.Mtr with powder coating of thickness 60-65
Microns, frame with 1.2mm thick Skin pass Galvanized Iron
sheet formed to double rebate profile of ize 143 mm X 58
mm with maximum bending radius of 1.4 mm and filled with
in-fill Polyurethane foam, the Door Shutters are with 0.80
mm thick Skin pass Galvanized Iron Sheet formed to
provide a 46 mm thick fully flush, double skin door shell
with Lock Seam joints at stile edges, fitted with in-fill of
Honeycomb Kraft Paper and coated with polyester powders
of Pure polyester/ epoxy polyester or polyurethane powder
for powder coating of thickness 60 – 65 microns and are
coated with Zinc Phosphate Primer to receive any paint on
site or finished with Thermosetting Polyurethane paint of
Aliphatic Grade providing high levels of scratch resistance
and durability, the Shutter provided with 6 MM clear float
vision glass in Circular, Square or Rectangular shapes,
Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed
flush to the frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever Handles, Mortise Dead
Bolt, etc for 120 minutes Fire Rated door conforming to
IS:3614 (Part2) 1992
50 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
150mm dia
100 Providing , laying, testing & Commissioning of following ' B ' Providing , laying, Providing , laying,
classes MS pipes conforming to IS 3589 and 1239 testing & testing &
including fittings like elbows, tees, flanges, tapers, nuts, Commissioning of Commissioning of
bolts, gaskets etc., complete. following ' B following ' B
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
100mm dia
5 Supplying, fixing, testing and commissioning of butterfly Supplying, fixing, Supplying, fixing,
valve PN 1.6, with Bronze / Gun metal seat duly ISI marked testing and testing and
complete with Nuts, Bolts, Washers, gaskets, conforming to commissioning of commissioning of
IS 13095 of following sizes as required. butterfly va butterfly va
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / SANT/NEU-G
150mm dia
450 Supplying and wrapping the anticorrosive material for Supplying and Supplying and
buried pipes with coating of Primer and wrapping with 4 wrapping the wrapping the
mm thick polymer corrosion resistant tape as per IS : 10221 anticorrosive anticorrosive
with 15 mm overlap as per specificatios. material for buried material for buried
Make:IWL(PIPE KOT) or its equivalent
150mm dia
( SSR - 18-19, Item NO: 9.5.46 d +Overheads&Contractors
Profit @13.615% )
100 Supply and Transportation of XLPE insulated IS:7098/II/85 Supply and Supply and
H.T.cable for working voltage 11 K.V Earthed with Transportation of Transportation of
Stranded Compacted Circular Aluminium Conductor XLPE insulated XLPE insulated
Screened with Extruded Semi-conducting compound, IS:7098/II/85 H. IS:7098/II/85 H.
XLPE Insulated Screened with extruded semi-conducting
compound in combination with Copper Tape, cores laid up,
inner sheath of Thermoplastic tape, galvanised flat steel
strip armoured and overall Extruded PVC Type ST- 2 Outer
Sheathed cable etc complete
Make: Torrent
/ Universal / Unicab / Havells / KEI /Polycab/Gloster/RR
Kabel/RPG
3C X 120 sq.mm
4 Supply and Making heat shrinkable type indoor Supply and Making Supply and Making
/outdoor/straight through terminations joint kit of approved heat shrinkable type heat shrinkable type
make suitable for XLPE insulated 11 KV cable, with indoor indoor
required components, prepration of cable ends, testing etc /outdoor/strai /outdoor/strai
as required of following sizes.
Makes: Raychem /M seal/ Denson/ Multy/ Transeal-
Hongshang
Outdoor Termination Kit for 11KV XLPE (E) : 3C x 120 /
150 / 185 sq.mm
6 Supply and Making heat shrinkable type indoor Supply and Making Supply and Making
/outdoor/straight through terminations joint kit of approved heat shrinkable type heat shrinkable type
make suitable for XLPE insulated 11 KV cable, with indoor indoor
required components, prepration of cable ends, testing etc /outdoor/strai /outdoor/strai
as required of following sizes.
Makes: Raychem /M seal/ Denson/ Multy/ Transeal-
Hongshang
Indoor Termination Kit for 11KV XLPE (E) : 3C x 120 /
150 / 185 sq.mm
1 Supply, installation, testing and commissioning of TPN Supply, installation, Supply, installation,
415V, free standing type cubical panel board made out of testing and testing and
16 Gauge CRCA sheet steel, the panel shall be painted commissioning of commissioning of
after processing 7 tank process with RAL 7032 siemens TPN 415V, TPN 415V,
grey. The panel shall be consisting of suitable rating of
allumunium bus bars (At the rating of 0.8 A/Sq.mm)
supported with DMC/SMC and colour coded with heat
shrinkable sleeves. The bus bars fault level shall be 50 KA
and shall be as per the requirement of local CEIG, fire
regulations, other authorities etc. The panel shall be
suitable for accomdating the following switch gears
including supply of all components, hard wares etc
including all necessary civil works, adequate reinforcement
foundation bolts suitable G.I earth strip , 100 x 50mm MS
base channel, earth bar, door loop earthings, Bus bar to
switch interconne-ctions. All cables shall have proper cable
entry gland plates, suitable size of glands, earth tags for
glands, lugs, cadmium plated nuts , bolts, feeder
identification marks,and shall be installed on performed
trench and consisting of the following as required and as
per IS standards.
400 A Aluminium Bus Bar with colour code.
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: .
250A TPN, MCCB of 35/36 KA - 1 No
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Metering Set:
0-250A Digital Ammeters -1No (with built-in selector
switches). Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
0-500A Digital Voltmeters -1No (with built-in selector
switches). Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
R,Y,B indication Lamps LED type - 3 Nos
Makes: L&T / C&S / SALZAR / HPL .
1 Supplying, Installation,Testing and commissioning of Supplying, Supplying,
cubical type Floor Mounting, Dead front LT panel suitable Installation,Testing Installation,Testing
for 415V, 3 Phases and neutral 50HZ AC supply system and commissioning and commissioning
fabricated in compartmentalized design from CRCA sheet of cubical of cubical
steel of 2mm thick for frame work and 1.6mm for internal
partitions and doors, 2mm thick for gland plates including
cleaning and fininishing complete with 7 tank process for
powder coating with RAL 7032 (approved shade) having
2000A bus barcapacity extensible type TPN alluminium
alloy bus bars of high conductivity, DMC/SMC bus bar
supports, with shrot circuit capacity of 50 KA per second,
bottom base channel not less than 100mmX50mmX5 mm
thick, fabrication shall be done in compartmentalized
sections, entire panel shall have a commonm earth bar of
size 25x5mm at the rear with 2 Nos earth studs, solid
connections from main bus bar to switchgears with required
size of al bus bars and control wiring, cable alleys, cable
gland plates including providing following switchgears.
MAIN POWER PANEL AT Hospital SUBSTATION
IN COMING
800 A Electrical drawout type Micro processor type 4 pole
ACBs-3 Nois for 2 Nos for transformers and one as bus
coupler with electrical and mechanicl interlocking among
them.
Makes: Siemens-3WLETU45B / L&T-U Power
Omega(MTX3.5 EC) / Schneider -Master pact
NW 6.0P /Legrand-DMX3/C&S Winmaster-2)
Metering
0-800A Digital Ammeter -2NO
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
0-500V Digital Voltmeter -2 No.
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
R,Y,B indication Lamps LED type-6NOs
Makes: L&T / C&S / SALZAR / HPL .
Selector switches-4Nos
1 MAIN Lighting Panel Board MAIN Lighting Panel MAIN Lighting Panel
Supply, installation, testing and commissioning of wall/floor Board Board
mounting type panel board with alluminium bus bars Supply, installation, Supply, installation,
fabricated with 16 Gauge CRCA Sheet comprising of TPN testing and testing and
bus bars of equal size in all phases and neutral equipped
with bus bar chambers and cable chambers.The bus bars
fault level shall be 50 KA and shall be as per the
requirement of local CEIG, fire regulations, CPRI norms
and other authorities etc. The painting of the complete
system shall be powder coated duly processing the panel
in 7 tank process. The panel shall be suitable for
accomdating the following switch gear including supply of
all components, hard wares etc including all necessary civil
works, adequate reinforcement, foundation bolts, suitable
G.I earth strip 50 x 6mm, door loop earthings, bus bars
should be colour sleeved with heat shrinkable sleeves for
phase and neutral duly supported at regular intervels by
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for
Panel shall be manufacture only from CPRI approval
Fabricators.
800A Aluminium Bus Bar with colour code.(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: 630A, 4 Pole, MCCB, 50 KA - 1 No.
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Metering Set:
0- 630A Digital Ammeter with selector switch . - 1 No.
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
0-500V Digital Volt meter with selector switch - 1 No.
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
1 Supply, installation, testing and commissioning of wall/floor Supply, installation, Supply, installation,
mounting type panel board with alluminium bus bars testing and testing and
fabricated with 16 Gauge CRCA Sheet comprising of TPN commissioning of commissioning of
bus bars of equal size in all phases and neutral equipped wall/floo wall/floo
with bus bar chambers and cable chambers.The bus bars
fault level shall be 50 KA and shall be as per the
requirement of local CEIG, fire regulations, CPRI norms
and other authorities etc. The painting of the complete
system shall be powder coated duly processing the panel
in 7 tank process. The panel shall be suitable for
accomdating the following switch gear including supply of
all components, hard wares etc including all necessary civil
works, adequate reinforcement, foundation bolts, suitable
G.I earth strip 50 x 6mm, door loop earthings, bus bars
should be colour sleeved with heat shrinkable sleeves for
phase and neutral duly supported at regular intervels by
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for
Panel shall be manufacture only from CPRI approval
Fabricators.
800A Aluminium Bus Bar with colour code.(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: 400A, 4 Pole, MCCB, 50 KA - 1 No.
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Metering Set:
0- 400A Digital Ammeter with selector switch . - 1 No.
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
0-500V Digital Volt meter with selector switch - 1 No.
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
R, Y, B Indication lamps of LED type - 3 Nos.
1 Supply, installation, testing and commissioning of wall/floor Supply, installation, Supply, installation,
mounting type panel board with alluminium bus bars testing and testing and
fabricated with 16 Gauge CRCA Sheet comprising of TPN commissioning of commissioning of
bus bars of equal size in all phases and neutral equipped wall/floo wall/floo
with bus bar chambers and cable chambers.The bus bars
fault level shall be 50 KA and shall be as per the
requirement of local CEIG, fire regulations, CPRI norms
and other authorities etc. The painting of the complete
system shall be powder coated duly processing the panel
in 7 tank process. The panel shall be suitable for
accomdating the following switch gear including supply of
all components, hard wares etc including all necessary civil
works, adequate reinforcement, foundation bolts, suitable
G.I earth strip 50 x 6mm, door loop earthings, bus bars
should be colour sleeved with heat shrinkable sleeves for
phase and neutral duly supported at regular intervels by
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for Panel shall be
manufacture only from CPRI approval Fabricators.
400A Aluminium Bus Bar with colour code.(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: 250A, 4 Pole, MCCB, 35/36 KA - 1 No.
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Metering Set:
0- 250A Digital Ammeter with selector switch . - 1
No.Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
0-500V Digital Volt meter with selector switch - 1 No. Make:
Conzerve /Elmeasure/ Meco/ HPL/ L&T/ socomec
R, Y, B Indication lamps of LED type - 3 Nos.
Makes: L&T / C&S / SALZAR / HPL .
250/5A C.T coils - 3 Nos.
2 Supply and erection of 9 mtrs 175 X 85mm RS Joist pole Supply and erection Supply and erection
with base plate of 1ft x 1 ft x 6 mm including excavation of of 9 mtrs 175 X of 9 mtrs 175 X
pit, coil earthing, hire charges of special T&P painting of 85mm RS Joist pole 85mm RS Joist pole
Pole CC 1:3:6 upto ground and 1:2:4 for Couping work, with with
including labour and transportation charges etc., complete.
1 Labour Charges for fabrication of DP Structure and fixing Labour Charges for Labour Charges for
charges for AB Switch , HG fuse set LAS etc., including fabrication of DP fabrication of DP
cost hard ware materials, MS Clamps , Nuts and Boltes, Structure and fixing Structure and fixing
etc., complete ch ch
1 Supply and fixing of 100 A 11 KV Horn Gap fuse set as per Supply and fixing of Supply and fixing of
IS 9385 on existing DP structure with 6 nos 24 KV /22 KV 100 A 11 KV Horn 100 A 11 KV Horn
post Insulators( IS 5350, Hot dipped Hard ware, fuse wire Gap fuse set as per Gap fuse set as per
of required size etc., complete IS IS
1 Supply and fixing of distribution type lightning arrester 11 Supply and fixing of Supply and fixing of
KV 5 kA as per IS 3070 with mounting base on the existing distribution type distribution type
DP structure lightning arrester 11 lightning arrester 11
100 Supply and run of one of "0" SWG or 8.25 mm dia hard Supply and run of Supply and run of
drawn bare copper wire including copper binding wire etc., one of "0" SWG or one of "0" SWG or
complete as required including connections. 8.25 mm dia hard 8.25 mm dia hard
drawn b drawn b
3 Supply and fixing of 11 KV pin Insulator (IS 731/1971 ) with Supply and fixing of Supply and fixing of
minimum creepage distance of 300 mm on existing cross 11 KV pin Insulator 11 KV pin Insulator
arm including all accessories like Hot dip GI spindle and (IS 731/1971 ) with (IS 731/1971 ) with
nuts etc.,
9 Supply and erecting porcelain disc type insulator suitable Supply and erecting Supply and erecting
for 11KV line with suitable hardware on existing cross porcelain disc type porcelain disc type
arms. insulator suitable f insulator suitable f
50 Supply and erecting 7/3.15 AAAC / Rabbit (55 Sq.mm) Supply and erecting Supply and erecting
conductor for Overhead line with stringing, binding and 7/3.15 AAAC / 7/3.15 AAAC /
suitable size of clamps for Jumpering etc., complete. Rabbit (55 Sq.mm) Rabbit (55 Sq.mm)
conducto conducto
15 Providing independent earthling by excavating a trench to a Providing Providing
depth of 2.5 M in all soils, as per size specified in the Data, independent independent
using 100mm dia Heavy Gauge C.I ( Cast iron ) pipe of earthling by earthling by
2.5 Mtrs length with Heavy gauge Flange with necessary excavating a trench excavating a trench
accessories including filling with Bentonite powder and all to a to a
labour charges etc., complete. ( for Main Panels and DG
sets )
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 300.00 Sq.mm.
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 240.00 Sq.mm.
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 185.00 Sq.mm.
200 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 150.00 Sq.mm.
200 Earth work excavation of Trench in hard ground soil, laying Earth work Earth work
of U.G cables upto 300 Sq,mm on sand cushion covering excavation of excavation of
the cable with bricks and back filling of Trench duly Trench in hard Trench in hard
providing route indicator embedded in C.C including cost ground soil, laying ground soil, laying
and conveyance of materials and labour charges etc.,
complete.
200 Earth work excavation of Trench in hard ground soil, laying Earth work Earth work
of U.G cables on sand cusion covering the cable with bricks excavation of excavation of
and back filling of Trench duly providing route indicator (as Trench in hard Trench in hard
per general instruction S.No. 14 of SSR) embedded in C.C ground soil, laying ground soil, laying
including cost and conveyance of materials and labour
charges etc., complete.
400 Labour charges for run of U.G cable on wall / existing pipe Labour charges for Labour charges for
with necessary fixing arrangments such as saddles, run of U.G cable on run of U.G cable on
clamps,wooden separators etc., (as directed by wall / existing pipe wall / existing pipe
departmental official) for eath connections for the cables.
100 A) Supply, fixing laying and testing of the following GI / A) Supply, fixing A) Supply, fixing
Copper flats as earthing conductors from equipments to laying and testing of laying and testing of
earth station as per site conditions. the following GI / C the following GI / C
a ) 40x6 mm G.I flat
100 A) Supply, fixing laying and testing of the following GI / A) Supply, fixing A) Supply, fixing
Copper flats as earthing conductors from equipments to laying and testing of laying and testing of
earth station as per site conditions. the following GI / C the following GI / C
b ) 25x3mm Copper.flat
50 Supply and fixing of fencing frame of size 2.1M Height Supply and fixing of Supply and fixing of
fabricated with angle iron 40x40x6mm on four sides and fencing frame of size fencing frame of size
with 40x40x6mm 'T' Angle on middel, MS weld mesh 2.1M Height fabri 2.1M Height fabri
50x50mm including all accessories and painting. And
labour charges etc. complete.
2 Supply and fixing of Gate fixing frame with size 2.1M x Supply and fixing of Supply and fixing of
1.25M width fabricated with MS Angle 40x40x6mm fencing Gate fixing frame Gate fixing frame
frame and the gate of size 1.8M x 1.25M with Angle with size 2.1M x with size 2.1M x
35x35x5mm four sides and 40x40x6mm 'T' Angle in middle 1.25 1.25
& M.S weld mesh 2"x2" including painting.
1 Supply and fixing printed instructions chart both in English Supply and fixing Supply and fixing
and Telugu and duly framed with front glass for treatment printed instructions printed instructions
of person suffering from Electric shock. chart both in English chart both in English
1 Supply of pair of rubber hand gloves suitable for working Supply of pair of Supply of pair of
11/22 KV supply. . rubber hand gloves rubber hand gloves
suitable for working suitable for working
11 11
3 Supply of 6 MM thick 11KV, ISI, approved rubber mat of Supply of 6 MM Supply of 6 MM
thickness, required length and breadth.( 1000mm x thick 11KV, ISI, thick 11KV, ISI,
2000mm x 6mm ).. approved rubber approved rubber
mat of thick mat of thick
1 Supply of standard 18"x12"x8" first aid box with all standard Supply of standard Supply of standard
contents. 18"x12"x8" first aid 18"x12"x8" first aid
box with all standar box with all standar
4 Supply of G.I sheet bucket of round bottom of 13 Ltrs. Supply of G.I sheet Supply of G.I sheet
Capacity with printed letters and filled with sand and bucket of round bucket of round
arranged to existing stand or hook. bottom of 13 Ltrs. bottom of 13 Ltrs.
Capac Capac
1 Providing floor mounting stand for keeping 4Nos of bucket Providing floor Providing floor
1500mm length, 900mm height made out of 40x40x6mm mounting stand for mounting stand for
angle iron welded with 4 hooks and duly painted with one keeping 4Nos of keeping 4Nos of
coat of red lead and two coats of enamel paint. bucket 15 bucket 15
2 Supply and fixing of Danger Boards with Multi- Supply and fixing of Supply and fixing of
Languages(MR) Danger Boards with Danger Boards with
Multi- Multi-
Languages(MR) Languages(MR)
2 Supply and fixing of ABC stored pressure squeeze grip Supply and fixing of Supply and fixing of
type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled ABC stored ABC stored
with ABC Mono Ammonium Phosphate base powder- 90 pressure squeeze pressure squeeze
complete with discharge hose and wall mounting bracket, grip type f grip type f
2mm Mild Steel, EPDM Rubbers, Pressure Guage, which
work effectively on all class of fires (A, B, C
& Electrical fires) with 5 years warranty Including
transportation, all taxes and all labour charges etc
complete.
Makes : Safex / Kenex / Bharat / Reliance/NewTech
2 Supply and fixing of ISI mark (IS:15683) Mono ammonium Supply and fixing of Supply and fixing of
phosphate powder 90 (MAP) 4 Kg Fire extinguisher, stored ISI mark (IS:15683) ISI mark (IS:15683)
pressure type, pressure gauge, gross wt. 6.9 kg, empty Mono ammonium Mono ammonium
wt.2.9 kg, Discharge time minimum 13 sec, controllable phosp phosp
discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating -3 A, B
rating -34 B, can construction: Deep drawn and Co2 mig
welding, Valve construction: Forging & Machining, internal
coating of can: Epoxy powder coating, External coating of
Can:Epoxy polyster powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5
years warranty Including transportation, all taxes and all
labour charges etc complete.
Makes : Safex / Kenex / Bharat / Reliance/NewTech
15 Fabrication, Transportation and supply of hot-dip Fabrication, Fabrication,
galvanized Octogonal Pole with BSEN - 10025 grade S 355 Transportation and Transportation and
JO steel plate for shaft, IS 2062 for base plate with door supply of hot-dip supply of hot-dip
opening arrangement, including the supply of suitable galvanized galvanized
boards with bakelite sheet and MCB's as per IS
specification suitable to withstand the wind speed of 180
KMPH for 7.50 Mtrs height Pole having dimensions Bottom
130 mm,. Top 70mm with 3mm thick, base plate 220 x 220
x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with
template of
Make : Bajaj / Valmont /Transrail/Utkarsh/ Skipper/
Laasma/United
15 Erection charges for 7.50 Mts long Octagonal pole on Erection charges for Erection charges for
bridge kerb portion (R.C.C). with 4 Nos 8" Anchor bolts/ 7.50 Mts long 7.50 Mts long
M20xsuitable "J" type bolts etc duly drilling holes to RCC Octagonal pole on Octagonal pole on
slab and with V.C.C. M.15 concrete for base concreting up bridge bridge
to a height of 8" with necessary Reinforcement work etc.
including cost and con veyance of all material and all
labour charges etc. complete as directed by the department
officers.
500 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
4 Core 16 Sq.mm
100 Supply and transportation of following XLPE insulated, Supply and Supply and
1100V grade armoured alluminium cable as per transportation of transportation of
specification confirming to IS:7098 (Part - I)./1554-I following XLPE following XLPE
Make: Torent / Universal / Unicab / Havells / KEI / Gloster / insulated, 1100V insulated, 1100V
Polycab /RR Kabel / RPG / Finolex / Finecab / Paragon / V-
Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
3.5 Core 25 Sq.mm
15 Supply and transportation of 60 W LED Street light Supply and Supply and
Luminaire made of pressure diecast alluminium body with transportation of 60 transportation of 60
powder coated, having protective toughned glass, Supply W LED Street light W LED Street light
Input voltage 120 - 270 V AC, P.F > 0.90, high power Luminaire Luminaire
LED's having System efficacy > 100 lm/W and junction
temprature < 70°C, with Ingrees protection IP66, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), Driver
surge protection 4KV, external Surge protection 10 KV with
optics distribution , THD<10% at 110 Volts AC, driver
efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70,
etc., complete
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) / GE-Venture / rompton(Hawk/Nexus star) / Bajaj
(Edge) / Halonix(Lumos - Super) / Havells (Endura
Pearl) /Capart(Premium)/Greenlites(Hi-Lux)
/Polycab/Keselec/ HPL(City Vision)/
Jaquar(Premium)/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG
20 Providing Indoor Oridinary end terminations for the cable Providing Indoor Providing Indoor
specified above with compression type steel gland. Bi - Oridinary end Oridinary end
metallic lugs using crimping tool, Insulation tape, terminations for the terminations for the
identification tags etc., including end termination and cable sp cable sp
earthing of gland.
25 Sq.mm
40 Providing Indoor Oridinary end terminations for the cable Providing Indoor Providing Indoor
specified above with compression type steel gland. Bi - Oridinary end Oridinary end
metallic lugs using crimping tool, Insulation tape, terminations for the terminations for the
identification tags etc., including end termination and cable sp cable sp
earthing of gland.
16 Sq.mm
300 Earth work excavation of Trench in hard ground soil, laying Earth work Earth work
of U.G cables upto 70 Sq,mm on sand cushion covering excavation of excavation of
the cable with bricks and back filling of Trench duly Trench in hard Trench in hard
providing route indicator embedded in C.C including cost ground soil, laying ground soil, laying
and conveyance of materials and labour charges etc.,
complete.
300 Labour charges for run of U.G cable up to 70 sq.mm on Labour charges for Labour charges for
wall / existing pipe with necessary fixing arrangments such run of U.G cable up run of U.G cable up
as saddles, clamps,wooden separators etc., (as directed by to 70 sq.mm on to 70 sq.mm on
departmental official) for eath connections for the cables. wall / wall /
30 Supply and Laying NP2 class RCC hume pipe with bends, Supply and Laying Supply and Laying
Collars and other accessores of following siges including NP2 class RCC NP2 class RCC
trench excavation for laying the same with RCC incsing hume pipe with hume pipe with
around. bends, Collar bends, Collar
150mm Dia
2 Supply and fixing of suitable out door type feeder piller box Supply and fixing of Supply and fixing of
made with 14 SWG CRCA sheet after 7 tank process suitable out door suitable out door
including S & F of Legrand / Schnieder / L&T make 40-63A type feeder piller bo type feeder piller bo
FP MCB, 9 Nos SP MCB's,din chanel, bus bars, 6 Sqmm 3
core copper cable for internal wiring , contactor, connectors
and provision for energy meter etc., complete for finished
item of work.
2 Supply and Transportation of ……... Three phase open well Supply and Supply and
ISI submersible motor pumpset confirms to IS 14220 : Transportation of Transportation of
1994. . ……... Three phase ……... Three phase
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi open well ISI open well ISI
/PSG/ Aryen Varsha
7.50HP(100x75)
( SSR -19-20 - 5.4.9 c + Overheads&Contractors Profit
@13.615% )
2 Supply and Transportation of ……... Three phase open well Supply and Supply and
ISI submersible motor pumpset confirms to IS 14220 : Transportation of Transportation of
1994. . ……... Three phase ……... Three phase
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi open well ISI open well ISI
/PSG/ Aryen Varsha
5.00HP(75x65)
( SSR -19-20 - 5.4.9 b + Overheads&Contractors Profit
@13.615% )
2 Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. Supply & Fixing of Supply & Fixing of
enclosed with no volt coil and overload protection with D.O.L Starter 415V, D.O.L Starter 415V,
necessary materials, etc., complete suitable for…... 3 phase, 50Hz.. 3 phase, 50Hz..
Makes: Siemens / Crompton / L&T (MK2 DOL). enclo enclo
up to 3 HP
( SSR -19-20 - 5.4.19 a + Overheads&Contractors Profit
@13.615% )
6 Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. Supply & Fixing of Supply & Fixing of
enclosed with no volt coil and overload protection with D.O.L Starter 415V, D.O.L Starter 415V,
necessary materials, etc., complete suitable for…... 3 phase, 50Hz.. 3 phase, 50Hz..
Makes: Siemens / Crompton / L&T (MK2 DOL). enclo enclo
5 to 7.5 HP
( SSR -19-20 - 5.4.19 b + Overheads&Contractors Profit
@13.615% )
8 Fixing Charges for submersible motor pumpset etc., Fixing Charges for Fixing Charges for
including all labour chrages. submersible motor submersible motor
pumpset etc., includi pumpset etc., includi
400 Supply and Laying of Flat Copper cable as per IS Supply and Laying Supply and Laying
694:1990 for Submersible Motors. of Flat Copper of Flat Copper
Makes: Finolex / Polycab / Havells / KEI/Gloster cable as per IS cable as per IS
3 Core 2.5 Sqmm 694: 694:
( SSR -19-20 - 1.6.3 b + Overheads&Contractors Profit
@13.615% )
400 Supply and Laying of Flat Copper cable as per IS Supply and Laying Supply and Laying
694:1990 for Submersible Motors. of Flat Copper of Flat Copper
Makes: Finolex / Polycab / Havells / KEI/Gloster cable as per IS cable as per IS
3 Core 4.0 Sqmm 694: 694:
( SSR -19-20 - 1.6.3 c + Overheads&Contractors Profit
@13.615% )
GRAND TOTAL:
Rate (Rs.) Unit Amount (Rs.)
NA 81.00 ONE RM 1296000
NA 1193.00 RM 119300
64427338
390247930
314969671 314969670 -1.00
4880968 4880968 0.00
881840.00 881840.00 0.00
5,088,114 5,088,114 0.00
64427338 64427338 -0.40
390247931 390247930 -1.40
0
5011884
5,088,114
76,230
NAME OF THE WORK: CONSTRUCTION OF 200 BEDDED SUPER SPECIALITY
HOSPITAL WITH KIDNEY RESEARCH CENTRE & DIALYSIS UNIT AT PALASA
VILLAGE IN SRIKAKULAM DISTRICT.
GENERAL ABSTRACT
Sl.No. Description of Item Amount in Rs.
1 Civil Works
A HOSPITAL BUILDING ` 292964580
B 130 KLD SEWERAGE TREATMENT PLANT ` 9929139
C 4 LAKH LITERS SUMP ` 3975893
D STROM WATER DRAINS ` 1987391
E COMPOUND WALL ` 5321992
F ROAD ` 5878790
Sub Total 320057784
2 Internal Sanitary & WaterSupply ` 4880968
3 External Sewerage & Sanitary Arrangements ` 881840
10482.00 589.00 649.00 170.00 83.00 4412.00 16385.00 CUM ONE CUM 101.00 1654885
619.00 31.00 73.00 164.00 887.00 CUM ONE CUM 3774.00 3347538
d) Plinth Beams 176.00 3.00 75.00 254.00 CUM ONE CUM 7414.00 1883156
f) STP/Sump base Slab 92.00 95.00 22.00 209.00 CUM ONE CUM 6101.00 1275109
a) Columns :
Cellar : 145.00 145.00 CUM ONE CUM 9997.00 1449565
First Floor : 214.00 2.60 1.40 19.90 237.90 CUM ONE CUM 9997.00 2378286
Basement Floor : 1098.00 194.25 1292.25 CUM ONE CUM 5147.00 6651211
First Floor : 161.00 8.00 4.50 173.50 CUM ONE CUM 8327.00 1444735
i) ROOF SLABS :
i) Roof Slabs 125mm thick :
Cellar : 283.00 283.00 SQM ONE SQM 998.00 282434
First Floor : 284.00 55.00 339.00 SQM ONE SQM 1048.00 355272
First Floor : 1652.00 92.00 261.00 2005.00 SQM ONE SQM 1114.00 2233570
First Floor : 1192.00 10.00 8.00 1210.00 SQM ONE SQM 1243.00 1504030
a) Columns :
un supported height up to 4.27 m
Third Floor : 251.00 251.00 CUM ONE CUM 12595.00 3161345
b) Roof Beams
un supported height up to 4.27 m
Third Floor : 161.00 161.00 CUM ONE CUM 10781.00 1735741
First Floor : 6.00 2.00 12.00 172.00 192.00 CUM ONE CUM 5719.00 1098048
First Floor : 445.00 17.00 16.00 478.00 CUM ONE CUM 6270.00 2997060
For Compound wall : 255.00 255.00 CUM ONE CUM 5729.00 1460895
Basement Floor : 12.60 20.00 32.60 CUM ONE CUM 4942.00 161109
First Floor : 114.20 22.60 19.72 4.90 10.81 7.30 179.53 MT ONE MT 58063.00 10424050
Basement Floor : 2781.00 48.00 60.00 2889.00 SQM ONE SQM 336.00 970704
Basement Floor : 3650.00 80.00 86.00 3816.00 SQM ONE SQM 429.00 1637064
Basement Floor : 3895.00 89.00 98.00 4082.00 SQM ONE SQM 446.00 1820572
First Floor : 104.00 48.00 189.00 341.00 SQM ONE SQM 802.00 273482
Cellar : 80.00
First Floor 615.00 711.00 1326.00 SQM ONE SQM 330.00 437580
First Floor : 55.00 253.00 308.00 SQM ONE SQM 455.00 140140
above First Floor : 298.00 298.00 SQM ONE SQM 492.00 146616
and SS cover plates with brass pivot and sigle piece MS Sheet
outer box with slide plate etc.complete (Weight Capacity
up to 130 Kgs) as approved by Engineer-in-Charge including
supply and fixing ISI marked powder coated aluminium fixtures
of 3 Nos. of butt hinges (IS:205) of 150mm long(for each
shutter), 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4
Nos.alluminium handles (IS:208) 150mm dia and 2 Nos.
aldrops (IS:2681) 300mm long including labour charges for
manufacturing door , fixing the door with required No. of screws
etc., including overheads & contractors profit complete for
finished item of work. (The Aluminium section used shall be
standard make confirming to IS 1948 – 1961) and as approved
by the Engineer) (2000mm x 2600mm)
Cellar : 110.00 RM
After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer
rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge inclusive of
cost of Single / double glass panes and silicon sealant. Note:
For uPVC frame, sash and mullion extruded profiles minus
5%tolerance in dimension i.e. in depth & width of profile shall be
acceptable.Variation in profile dimension in higher side shall be
accepted. But, no extra payment on this account shall be made.
6843.00 0.00 98.00 3632.00 10573.00 SQM ONE SQM 248.00 2622104
1514.98 5.00 16.00 0.00 44.00 1579.98 SQM ONE SQM 169.00 267016
Fifth Floor : 101.00 90.00 191.00 SQM ONE SQM 1546.00 295286
Cellar : 7.00 RM
Cellar : 7.00 RM
Amount
S.No Description of Work Quantity Units Rate
(Rs.)
1 Supplying and laying, filling, jointing and testing SWG SP-1 pipe
conforming to ISI 651 & 4127 with air tight Cement joints in CM
(1.5:1) prop. including excavation of trenches and socket pits in
any soil (except rock requiring blasting) and refilling with
watering and tamping to the required slope including cost and
conveyance of all materials to site and all labour charges ,
overheads & contractor profit etc., complete for finished item of
work (APSS NO 1301 & 1318)
a 152.40mm dia upto 1524.0mm (5') depth 275.00 Rmt 635.00 174625
2 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI 60.00 NO 551.00 33060
make confirming to IS 651 & 4127 with C.I grating &
constructing cement brick masonry in CM (1:6) prop.,
intermediate chamber and fitted with 304.8 mm X 288.6 mm
(12"x9") C.I Frame with hinged cover of standard make as
approved including cost and conveyance of all materials to site,
labour charges, overheads & contractors profit etc., complete for
finished item of work.
4 Constructing 904.0 mm (3’0”) dia brick masonry inspection 20.00 NO 6269.00 125380
chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6)
prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5
N/sq.mm including plastering with cement mortar 1:3 prop; ½”
thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of 904
mm (3'-0") in all sorts of soils (exculding rock) and laying cement
conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and
P.C.C. 1:2:4 benching and channel 100 mm thick as per
Standard specification and including cost and conveyance of all
materials like cement, sand, bricks, water etc., to site and all
incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads &
contractors profit etc., complete for finished item of work as per
Standard specification.
5 Constructing 904.0 mm (3’0”) dia brick masonry inspection 15.00 NO 9792.00 146880
chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6)
prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5
N/sq.mm including plastering with cement mortar 1:3 prop; ½”
thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of
1524 mm (5'-0") in all sorts of soils (exculding rock) and laying
cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal
and P.C.C. 1:2:4 benching and channel 100 mm thick as per
Standard specification and including cost and conveyance of all
materials like cement, sand, bricks, water etc., to site and all
incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads &
contractors profit etc., complete for finished item of work as per
Standard specification.
6 Supplying and fixing 580mm x 440mm long Orissa pan white 48.00 NO 4305.00 206640
glazed Water Closet 1st quality ISI marked confirming to
IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and
providing masonry seat, CC squatting plate and 10 litres
capacity single flush PVC low level cistern with internal
components fixed on 2 Nos. of teak wood blocks of size
76.20mm x 101.60mm using required size of nails, screws as
approved by Engineer-in-charge, angle stop cock 12.70mm dia.
first quality Indian make heavy duty, 12.70mm PVC connection
with brass union nuts CP coated , 31.75mm brass plumber
union, P trap or S trap of Indian W.C. shall be encased on CC
(1:2:4) 150mm alround well above the joint to stop leakage at
the joint etc., complete including cost and conveyance of all
materials to site, cost of CC bed, labour charges and
seigniorage charges, overheads & contractors profit etc.,
complete for finished item of work.
8 Supply, Installation and commissioning approved make floor 20.00 NO 17413.00 348260
mounted close coupled EWC suit CASCADE model 'P' or 'S'
trap with dual flush porcelain cistern fixed on EWC with
allinternal parts of dual flush cistern, ultra solid seat cover of
approvedmake with rubber buffer and cap 15 mm angle stop
cock 450 mm long PVC inter connection pipe wall flanges all of
approved make etc. complete for finished item of work in all
respects: Special Colour - Grade - III
8 Supplying and fixing Indian make Flat Back Wash Hand Basin 158.00 NO 2431.00 384098
1st quality conforming to IS:2556-Part-4:1972 of size 550mm x
400mm with 32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 and fitted with 15 mm
nominal bore Chromium Plated Pillar Tap of 1st quality Indian
make heavy duty complete with standard CI brackets including
wooden blocks ,1 No.12.70mm PVC connection with brass
union nuts CP coated , angle stop cock 12.70mm dia. first
quality Indian make heavy duty, 31.75mm dia. PVC flexible
waste pipe 914.4mm length of 1st quality including cost and
conveyance of all materials to site, labour charges , overheads
& contractors profit for finished item of work
9 Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st 22.00 NO 2898.00 63756
quality conforming to IS:2556-Part-4:1972 with waste fittings like
rubber plug, chain,32 mm nominal size C.P. Fitting with parallel
pipe thread conforming to IS:2963- 1979 and fitted with 15 mm
nominal bore Chromium Plated Pillar Tap of 1st quality Indian
make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent
complete with standard CI brackets including wooden block: 630
x 450 mm - Double C.P. Pillar cock
9 Supplying and fixing NP soap dish heavy type of approved make 112.00 NO 240.00 26880
ISI quality with NP screws etc., complete including cost and
conveyance of all materials, labour charges for fixing ,
overheads & contractors profit for finished item of work in all
floors
10 Supplying and fixing TV shape mirror with plastic frame of size 62.00 NO 546.00 33852
609.6mm x 457.2mm , plywood back with NP screws 1st quality
including cost and conveyance of all materials, labour charges ,
overheads & contractors profit for finished item of work in all
floors.
11 Supply and fixing wall mirror with provision for over head shower 6.00 NO 5394.00 32364
and 115 mm long bend pipe with wall flange Jaquarmake queen
series with 7 years warranty:Chrome plated overheads &
contractors profit for finished item of work in all floors.
11 Supplying and fixing of 25.4mm dia , 609.6mm long aluminium 92.00 NO 178.00 16376
anodized towel rods with brackets and aluminium screws
including cost and conveyance of all materials, labour charges ,
overheads & contractors profit for finished item of work.
12 Supply & Fixing of Towel rod 24 " Jaquar make Queen series 6.00 NO 3173.00 19038
Ivory gold colour with 7 years warranty overheads & contractors
profit for finished item of work in all floors.
12 Supplying and fixing NP bib taps of size 12.70mm dia of Indian 249 NO 405.00 100845
make heavy duty (long body) as approved by the Engineer-In-
Charge including cost and conveyance of all materials, labour
charges , overheads & contractors profit complete for finished
item of work in all floors.
13 Supplying & fixing 15 mm bib tap with flange Chromeum plated 14 NO 1685.00 23590
Jaquar make queen series including overheads & contractors
profit for finished item of work in all floors.
13 Supplying and fixing NP bib taps of size 12.70mm dia of Indian 45 NO 262.00 11790
make heavy duty (short body) as approved by the Engineer-In-
Charge including cost and conveyance of all materials, labour
charges , overheads & contractors profit complete for finished
item of work in all floors.
14 Supplying and fixing 65 mm Nominal Bore GI pipe Medium 490.00 Rmt 858.00 420420
Grade properties & weight as per IS 1239 in ground or on wall
with GI fittings such as elbows tees couplings, nipples, plugs
including excavation for trenches and refilling the
trenches ,chiselling masonry walls and making good the walls &
floors to the original surface and fixing MS clamps on TW blocks
on walls including cost and conveyance of all materials and
labour charges , overheads & contractors profit complete for
finished item of work except for GI bends union and GI
connectors with checkout and socket Tata or Zenith make or
equivalent
16 Supplying and fixing of stainless steel sink of size 914.4 mm 43.00 NOS 5396.00 232028
x457.2mm, 1mm thick of Indian make fixed on cantilever
brackets including supply and fixing 31.75mm C.P. waste
coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm
length of Ist quality ncluding chiselling brick masonry wall and
making good & restoring to original surfaces overheads &
contractors profit complete.for finished item of work in all floors.
18 Providing and placing on terrace (at all floor levels) 20000 Ltrs 5.96 119200
polyetheylene water storage tank with double layer approved
brand and manufacture with cover and suitable locking
arrangement and making necessary holes for inlet and outlets
and over flow pipes but without fittings and base support for
tanks including cost and conveyance of all materials and labour
charges , overheads & contractors profit complete for finished
item of work.
20 Supplying and fixing of 16mm to 20 mm thick polished marble 29 Nos 1976.00 57304
slab partitioins of size 4' 0" x 2' 0" for urinals including full
rounding the edges , fixing in position, polishing, including cost
and conveyance of all materials and labour charges , overheads
& contractors profit complete for finished item of work for all
floors
21 Supplying and fixing of 101.60mm x 609.60mm white glazed 34 Nos 876.00 29784
porcelain channels 1st quality fixed in brick masonry to the
required slopes , white cement pointing including cost and
conveyance of all materials and labour charges , overheads &
contractors profit complete for finished item of work for all
floors.
22 Construction of brick masonry support for GI pipe of size 210 NO 84.00 17640
304.80mm x 228.60mm x 228.60 mm in CM (1:8) prop including
plastering and finishing with 12mm thick in CM (1:5) including
cost and conveyance of all materials and all labour charges,
overheads & contractors profit complete for finished item of work
for all floors.
4880968
Amount
Sl. No. Description of Work Quantity Unit Rate
(Rs.)
1 Earth work excavation for foundations (Mechanical Means) for 300.00 CUM 101.00 30300.00
buildings in ordinary soils and depositing on bank for all lifts
and with an initial lead of 10m and up to 3m depth including
all operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
a) 203.20mm dia upto 1524mm ( 5' ) depth 65.00 Rmt 876.00 56940.00
b) 254mm dia upto 1524mm (5') depth 55.00 Rmt 1263.00 69465.00
3 Constructing 904.0 mm (3’0”) dia brick masonry 10.00 Nos 6269.00 62690.00
inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop using 2nd Class Clay Bricks of 225
mm thick from approved source having a minimum crushing
strength of 5 N/sq.mm including plastering with cement
mortar 1:3 prop; ½” thick both inside and outside fitted with
20” dia RCC manhole covers and frames including excavating
pits up to a depth of 904 mm (3'-0") in all sorts of soils
(exculding rock) and laying cement conrete (1:4:8) 150 mm
thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and
channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement,
sand, bricks, water etc., to site, cost of seigniorage charges
on all materials and all incidental and operational, labour
charges like mixing cement mortar, constructing masonry, lift
charges, curing etc., complete for finished item of work as per
Standard specification.
5 Supplying & fixing of rcc hume pipe NP2 class 300mm dia 150.00 Rmt 1174.00 176100.00
conforming to BIS:458/2003 including cost all taxes and
conveynce of all meterial such as RCC NP2 class pipes,
collars and other required specials excluding earth work
excavation using machinary and refilling for pipe lines as per
approved plan and as directed by Engineer in-charge
including cost taxes and conveyance of all meterials including
alll labour charges for laying in possitions jointing with
required meterials as per standered specifications etc...
complete finished item of work
7 Supply, Delivery of D.I Double Flanged Swing Check type 3 Nos 26948.00 80844.00
Reflux valves (Non Return Valves) of following dia.
conforming to IS- 5312 (Pts-1&2) (with amendments up to
date, if any) having Body, Cover, Door, Bearing holder with
D.I; Hinge pin, Door pin, Door suspension pin with Stainless
Steel (IS 6603); Body seat ring , Door face ring, Bearing
bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 );
Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges
with Cast steel; excluding transportation and all taxes
complete.PN 1.6 (MPa)
100mm Dia
100mm Dia
9 Manufacture, Supply and delivery of DI D/F Butterfly Valves, 3.00 Nos 34759.00 104277.00
Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or
GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2
Double eccentrically designed Disc., with renewable soft seal
on the disc and Integral Body seat face of nickel-chromium
overlay welding (Fusion Bonded) micro finished, 100 % leak
tight in both directions, Medium free bearings and with
minimum thickness of 250 microns Fusion bonded food grade
epoxy coating and 1200mm dia. and above food grade liquid
Epoxy coating of minimum 150 microns applied on both body
and disc inside and outside Face to face dimensions as per
EN558-1/IS 13095 body or IS: 13095 long body design
standard as per EN 593/IS 5163 Flange drilling as per EN
1092-2/ IS 1538 the Valve should be suitable for buried
application.PN 1.6
(MPa)
I MECHANICAL WORKS
1 Supply and fixing, testing and commissioning of Manual 1.00 No. 32,000 32,000
Coarse Bar Screen
Size: To Suit 400mm Wide x 200mm Liquid Height
Clear Opening of Screen: 25mm
Size of Flat: 50mm x 6mm
Angle of Inclination: 60 Degree
Shape of Screen: Curved Top
Accessories: Rake & 2 Nos. Side Plate
MOC: SS 304
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
2 Supply and fixing, testing and commissioning of Manual 1.00 No. 44,000 44,000
Fine Bar Screen
Size: To Suit 300mm Wide x 200mm Liquid Height
Clear Opening of Screen: 10mm
Size of Flat: 50mm x 6mm
Angle of Inclination: 45 Degree
Shape of Screen: Curved Top
Accessories: Rake
MOC: SS 304
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
3 Supply and fixing, testing and commissioning of Slotted 1.00 No. 85,000 85,000
Pipe Oil Skimmer
Size: To Suit 750mm Wide Oil & Grease Trap
Size of Slotted Pipe: 200mm Dia
Type of Operation: Manual Hand Wheel
MOC of All Wetted Parts : SS 304
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
4 Supply and fixing, testing and commissioning of Equ Tank 2.00 Nos. 120,000 240,000
Blower
Capacity of Blower: 50m3/Hr @ 5.5 MWC
Type of Blower: Twin Lobe
MOC of Blower: CI
Speed of Blower : Less than 1000 RPM
Speed of Blower Motor: 1440 RPM
The Blower shall be complete with Blower & Motor mounted
on a common base frame, belt drive, belt guard, Suction &
Discharge Silencer, Air Filter, Safety Valve, NRV, etc.,
complete.
Make: Kay/Everest/Swan
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
6 Supply and fixing, testing and commissioning of Coarse 18.00 Nos. 750 13,500
Bubble Diffusers
Type: Disc Diffuser
Size: 80mm Dia
MOC: EPDM
Make: Rehau/OTT/SSI/Aquaflex/Techpro/Shridevi
/Sreetech
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
7 Supply and fixing, testing and commissioning of Equ 2.00 Nos. 68,000 136,000
Effluent/Sewage Pump
Capacity of Pump: 8 Cu.m/Hr @ 6m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 10mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Accessoreis: Auto Coupling, SS304 Lifting Chain, SS Guide
Pipe, Control Panel with Level Switches for auto Start &
Stop
Make: Kishor/KSB/Grundfos/CRI/Wilo/Kirloskar
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
8 Supply and fixing, testing and commissioning of Mixer for 1.00 Nos. 95,000 95,000
Anoxic Tank
Type: Turbine Type
RPM of Mixer: 100
MOC of Shaft & Blades: SS 304
Motor KW: 1.1
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
9 Supply and fixing, testing and commissioning of Aeration 2.00 Nos. 160,000 320,000
Blower
Capacity of Blower: 120Nm3/Hr @ 5.5 MWC
Type of Blower: Twin Lobe
MOC of Blower: CI
Speed of Blower : Less than 1000 RPM
Speed of Blower Motor: 1440 RPM
10 Supply and fixing, testing and commissioning of Fine 20.00 Nos. 2,000 40,000
Bubble Diffusers
Type: Tubular
Size: 1.0m Long x 90 Dia
MOC: EPDM
Make: Rehau/OTT/SSI/Aquaflex/Techpro/Shridevi
/Sreetech
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
11 Supply and fixing, testing and commissioning of Air Piping 100.00 KGS 450.00 45,000
from Blower upto Diffusers for Equ Tank Blower &
Aeration Blower
MOC of Exposed Pipes: SS 304
MOC of Vertical Drops: SS 304
MOC of Under Water pipes: SS 304
MOC of Guide Pipe & Lifting Chain: SS 304
The Air Piping shall be complete with Individual blower
delivery piping with NRV, Diaphragm Valve, Main Header
Piping from the Blower delivery up to equ tank/aeration tank
including drop/vertical piping, header along the tank,
vertical drop pipes with control valve & dismantling type
joint, diffuser header pipe & laterals with nozzles for
diffuser, end cap, vertical guide pipe at the other end of
diffuser header, lifting chain, etc., complete. The design of
piping shall be such that it should be possible to remove
diffusers from the tanks without emptying tank & shutting off
the system. The arrangement shall be that the we should
be able to take out the Vertical drop pipe & the diffuser
header just by dismantling the joint in the vertical drop pipe
and should be able to refix the same in position.
The Contractor has to provide detailed air piping calc for the
air pipes from the diffuser supplier to match the specified
blower.
Battery Limit: Form Flange of Blowers till diffuser
The Piping cost is inclusive all necessary materials required
for the piping like pipes, fittings, adopters, flanges,
fasteners, pipe supports, clamps, valves, labour charges for
fabrication, erection, pressure testing, etc., complete.
13 Supply and fixing, testing and commissioning of Internal 2.00 Nos. 57,000 114,000
Recirculation Pump
Capacity of Pump: 2 Cu.m/Hr @ 5m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 10mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Accessoreis: Auto Coupling, SS304 Lifting Chain, SS Guide
Pipe, Control Panel with Level Switches for auto Start &
Stop
Make: Kishor/KSB/Grundfos/CRI/Wilo/Kirloskar
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
Final payment after Lab Testing treated water satisfing the
following parameters BOD less than 5, COD less than 10
14 Supply and fixing, testing and commissioning of Sludge 2.00 Nos. 38,000 76,000
Pump
Capacity of Pump: 2 Cu.m/Hr @ 5m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Make: Johnson/Kirloskar/KSB
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
15 Supply and fixing, testing and commissioning of UV 1.00 No. 108,000 108,000
Disinfection System
Flow: 7.50 Cu.m/Hr.
Type of Flow: Gravity
Type: UV Lamp covered with Quartz Glass
MOC of Enclosure: SS 304
Accessories: Control Panel
Make: Hitech/Sukrut
17 Supply and fixing, testing and commissioning of Pressure 1.00 No. 150,000 150,000
Sand Filter
Capacity of Filter: 7.50 Cu.m/Hr.
Minimum Dia of Filter: 1.00m
Minimum HOS of Filter: 1.8m
Minimum Height of Filter Sand: 0.30m
Minimum Plate Thickness for Shell & Dish: 6mm
Type of Underdrain: Nozzle Plate with Plastic Nozzles
Type of Inlet: Inlet Distribution Box/ Bell Mouth.
Specification for Filter Media: As per CPHEEO Manual
MOC of Filter: MSEP
Accessories: Frontal Piping & Valves.
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
18 Supply and fixing, testing and commissioning of Activated 1.00 No. 220,000 220,000
Carbon Filter
Capacity of Filter: 7.50 Cu.m/Hr.
Minimum Dia of Filter: 1.00m
Minimum HOS of Filter: 1.8m
Minimum Height of Activated Carbon: 0.30m
Minimum Plate Thickness for Shell & Dish: 6mm
Type of Underdrain: Nozzle Plate with Plastic Nozzles
Type of Inlet: Inlet Distribution Box.
Type of Activated Carbon: Coal Based/Coconut shell
Minimum Iodine Value for Activated Carbon: 1000
MOC of Filter: MSEP
Accessories: Frontal Piping & Valves.
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
19 Supply and fixing, testing and commissioning of 1.00 System 40,000 40,000
Hypochlorite solution dosing System
Dosing System shall be complete with
1 No. - 100 Lit Capacity HDPE Tank with Inlet & Outlet
Connections, Level Indicator
Dosing Pump, 0 - 5 LPH Capacity, 2 Nos.
Complete Flexible Tubing with Valves, NRV's, Strainers,
etc., from Dosing Tank to dosing Point
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
21 Supply and fixing, testing and commissioning of Treated 2.00 Nos. 57,000 114,000
Water Pump
Capacity of Pump: 15 Cu.m/Hr @ 20m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Closed
MOC of Casing: CI
MOC of Impeller: CI
Make: Johnson/Kirloskar/KSB/Grundfos
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
22 Supply and fixing, testing and commissioning of Filter 2.00 Nos. 50,000 100,000
Press Feed Pump
Capacity of Pump: 1 Cu.m/Hr @ 20m Head
Type of Pump: Screw Pump
Impeller Type: Screw
MOC of Casing: CI
MOC of stator : Nitrile
MOC of rotor : SS 304
Make: PD pumps / Rotomac / Alpha helical /Roto
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
23 Supply and fixing, testing and commissioning of Manual 1.00 No. 125,000 125,000
Plate Filter Press
Size of Plate: 610 x 610mm
No. of Chambers: 8 Chamber
Operation: Hydraulic Pump
Capacity: For Dewatering of 2 Cu.m/Day, 3% Sludge in
10Hour
Make: Hydro Press/Yo-Tana/Amar
including all incidental and operational charges etc, as per
approved drawings and as directed by Engineer-in-charge
complete for finished item of work.
25 Supply and fixing, testing and commissioning of Jib Crane 1.00 No. 0 0
for Lifting of Submersible Pumps
item Capacity : 0.5 Ton
deteled
26 Supply and fiing , testing and commissioning of Tube deck 8.00 CUM 10,000.00 80,000.00
Media for Tube settler .
Settling Velocity 50 m/sec
Thickness 1.00 mm
Structure ; Chirvan V - type
Hopper slope : 55 degree to 0 degree
MOC : PVC
Make: Rehau/OTT/SSI/Aquaflex/Techpro/Shridevi
/Sreetech
Sub - Total 2,620,500
1 250 A Aluminium Bus Bar with colour code. 1.00 No 155000.00 155,000
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: .
250A Three Pole, MCCB of 36 KA of
Makes: L&T /
Schneider / Havells
Metering Set:
0- 250A Digital Ammeter with selector switch . - 1 No.
WIRING
3 Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR 10 PTS 491.00 4,910
/ ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990
specification flexible copper cable (ISI MARK) in existing
pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular
switches with cover plate including all labour charges etc.,
complete for Light, Fan, Exhaust Fan etc., complete. (for
Non Residential Building)
Makes of wires:- Finolex / RR kabel / Havells / APAR E-
beam / KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art /
Gloster / Kundan cab/Sudhakar
4 Wiring with three runs of 1.5 sq.mm FRLS / HFFR / ZHFR 2 PTS 275.00 550.00
P.V.C. insulated 1100V grade as per IS : 694 / 1990
specificationflexible copper cable (phase, neutral, earth) in
the existing conduit pipe with 6 Amps Modular type switch,
and 6 A 3/2 pin Modular type socket with cover plate on
common switch board etc., complete.
Makes of wires:- Finolex / RR kabel / Havells / APAR E-
beam / KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art /
Gloster / Kundan cab/Sudhakar
RUN of MAINS
7 Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) 100 RM 82.00 8,200
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per
IS : 694 / 1990 specification flexible copper cable in
existing MS conduit pipe for individual ligting circuits
including labour charges etc., complete as required for
switch boards.
Makes of wires:- Finolex / RR kabel / Havells / APAR E-
beam / KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art /
Gloster / Kundan cab/Sudhakar
8 Supply and 3 runs of 4.0 sq mm (phase neutral and earth) 100 RM 114.00 11,400
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per
IS : 694 / 1990 specification flexible copper cable in
existing conduit pipe for run of mains including labour
charges etc., complete as required including labour charges
for 16A sockets.
Makes of wires:- Finolex / RR kabel / Havells / APAR E-
beam / KEI / Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab / Vimal / Fortune Art /
Gloster / Kundan cab/Sudhakar
1 Supply and fixing of TPN 4 way distribution board IP-43 1 NOS 6774.00 6,774
(8+12 Module) Protection as per IS:13032 with provision to
accommodate the ELCB incomer and suitable for single
pole outgoing MCB's in sheet Steel enclosure with 32A 4
pole MCB as incomer and 12 No of 6 to 32 Amps single
pole, 10 KA breaking capacity 'c' Curve MCB outgoings
including making connections etc., complete concealing in
wall. (LIGHTING DB's)
Makes : Legrand(Ekinox 3) / Schneider.
EARTHINGS
1 Supply and run of No. 8SWG GI wire including cost of all 50 RM 7.00 350
accessories and labour charges etc complete.
2 Supply and run of 25mmX6mm GI strip including cost of all 50 RM 91.00 4,550
accessories and labour charges etc complete.
3 Supply and run of 25mmX3mm copper strip including cost 50 RM 379.00 18,950
of all accessories and labour charges etc complete.
FIXTURES
5 Supply and fixing of BH/SBH in lieu of ceiling rose with 1 5 NOS 10.00 50
NO 3-5 W bulb with connections etc., complete with labour
charges
Makes: Anchor / Gold Medal Olive / Million Zoom.
STREET LIGHT
8 fixing of LED / MV / SV/ MH luminaire on wall with 1.0Mtr of 10.00 NOS 549.00 5,490
40mm dia GI pipe bracket and anti tilting MS Flat with 2.5
Sq.mm flexible copper wire etc.,including all labour charges
for mason work and giving connections etc., complete.
D Delivery Piping with Valves & NRV for Internal Recirculation 15 m 750 11,250
Pump up to Inlet of Anoxic Tank - 80 NB - uPVC Sch 40
Pipe
E Piping from Sec Clarifier Launder Outlet to Filter Feed Tank 5 m 750 3,750
through UV disinfection module - 80 NB uPVC Sch 40 Pipe
F Filter Feed Pump Suction (Dual Suction, one from Filter 10 m 750 7,500
Feed Tank & second from UF Feed Tank) and Delivery
Piping with valves, NRV, up to frontal piping of PSF &ACF -
80 NB uPVC Sch 40 Pipe
G Sludge Pump Suction and Delivery Piping with valves, 10 m 650 6,500
NRV, up to Thickener/Inlet of Aeration Tank - 65 NB - uPVC
Sch 40 Pipe
H Treated Water Pump Suction and Delivery Piping with 60 m 750 45,000
valves, NRV, up to battery limit - 80 NB - uPVC Sch 40 Pipe
4 Supply and Installation of 600mm x 75mm x 2mm thick hot 20.00 RM 840.00 16,800
dip GIperforated cable tray with cover along with required
angle supportswith coupler plates, Anchor bolts and nuts
etc complete and the tray,should be fitted on the wall /
Ceiling etc. complete.
1 Operation and maintance for Sewerage treatment plant for 12 MONTHS 72,388.00 868,656
24 hours, three shifts, Two helpers (in two shifts) + One
Technision (Electrician in one shift) including all required
chemicals and spares and Motor winding charges and any
other spares and consumables required during operation,
including cost and conveyance of all materials and labour
charges, all taxes etc., complete as Directed by Engineer-
in-Charge. (For Second year after trail run for Sewerage
treatment plant).
CONDUIT PIPE
1 16000 RM Supply and fixing of 25mm outer dia 2.20 mm thick Heavy ONE RM 81.00
grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK)
concealed in Roof Slabs with all required MS deep boxes
and all accessories including and labour charges etc.,
complete.
Makes : Precision/Universal& Marudhar/VIP /
GoldMedal /Million plast / GM / Sudhakar /Anchor/
Polyline/ Polycab/Orbit/AKG
2 11000 RM Supply and Fixing of 25mm outer dia Medium grade ( 1.8 ONE RM 91.00
mm Thick ) with IS:9537 part 3 FRLS regid P.V.C. pipe (ISI
MARK) concealed in wall with all required MS Deep Boxes
and all accessories including masonary work for light, fan
and separate plug point with MS modular switch box
including all labour charges etc., complete. for EPABX,
LAN, and CCTV, Run of mains, light, fan points.
Makes : Precision/Universal& Marudhar/VIP /
GoldMedal /Million plast / GM / Sudhakar /Anchor/
Polyline/ Polycab/Orbit/AKG
341 500 RM Supply and Fixing of 25mm outer dia thick surface P.V.C ONE RM 74.00
pipe (ISI MARK) with all accessories fixing on chromium
plated metallic base saddles alllabour charges etc.,
complete for run of mains
Makes : Precision/Universal& Marudhar/VIP /
GoldMedal / Million plast / GM /Sudhakar
/Polycab/Anchor/ Polyline/ Orbit/ AKG
3 475 Nos Supply and erecting MS galvanished Fan hook box with EACH 40.00
hook in RCC slab including all Labour charges etc.,
complete.
WIRING
4 3020 PTS Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / EACH 585.00
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 POINT
/ 1990 specification flexible copper cable (ISI MARK) in
existing pipe with 6A Modular switch, Ceiling rose/BH/SBH
Modular switches with cover plate including all labour
charges etc., complete for Light, Fan, Exhaust Fan etc.,
complete. (for Non Residential Building)
5 12 PTS Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / EACH 877.50
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 POINT
/ 1990 specification flexible copper cable (ISI MARK) in
existing pipe with 6A Modular switch, Ceiling rose/BH/SBH
Modular switches with cover plate including all labour
charges etc., complete for Light, Fan, Exhaust Fan etc.,
complete in NON Residential Buildings for 2 way
Staircase Points
7 50 PTS Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / EACH 509.00
ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 POINT
specificationflexible copper cable (ISI MARK) in existing
pipe with 6A switch and 6A, 3/2 pin socket Modular type
with 6A switch control and MS boxes with cover plate fixing
on separate board including all labour charges etc.,
complete.
Makes of wires:- Finolex / RR kabel / Havells /KEI /
Gloster/ V-Guard/Bonton /Finecab/ HPL / GM / Million /
Goldmedal /Fortune Art / Sudhakar/Orbit/ Tamra/
Anchor/Plaza/Vihan/Ollvin
9 75 PTS Supply and Fixing of 16 A/ 6A modular type power out EACH 963.00
let6s with front cover plates with following configurations POINT
1) 16A Socket - 1 nos.
2) 16A Switch - 1nos.
3) 6A socket - 2nos..
4) 6A Switch - 2nos.
Makes of wires:- Finolex / RR kabel / Havells /KEI /
Gloster/ Polycab / Bonton / V-Guard / GM / Million
/HPL / Goldmedal / Finecab /Fortune Art / Kundancab/
Sudhakar/ Orbit/ Standard/ Tamra/ Anchor
RUN of MAINS
10 9000 RM Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / ONE RM 24.00
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694
/ 1990 specification flexible copper cable in existing pipe for
earth continuity including all labour charges etc., complete.
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
11 15000 RM Supply and run of 3 of 22 /0.3mm (1.5 Sq.mm) FRLS / ONE RM 72.00
HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694
/ 1990 specification flexible copper cable in existing pipe for
mains continuity including all labour charges etc., complete.
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
12 13000 RM Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) ONE RM 101.00
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per
IS : 694 / 1990 specification flexible copper cable in
existing MS conduit pipe for individual ligting circuits
including labour charges etc., complete as required for
switch boards.
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
13 3500 RM Supply and 3 runs of 4.0 sq mm (phase neutral and earth) ONE RM 140.00
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per
IS : 694 / 1990 specification flexible copper cable in
existing conduit pipe for run of mains including labour
charges etc., complete as required including labour
charges for 16A sockets.
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
14 1500 RM Supply & run of 3 of 6.0 Sqmm (84/0.3mm) (phase neutral ONE RM 202.00
and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V
grade as per IS : 694 / 1990 specification flexible copper
cable in existing MS conduit pipe for run of mains including
labour charges etc. complete for AC points & SDB's etc as
required.
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
15 1600 RM Supply and run of 5 of 6 Sq mm (phases, neutral and earth) ONE RM 336.00
FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per
IS : 694 / 1990 specification flexible copper cable in
existing MS conduit pipe for circuits including labour
charges etc. complete as required for run of mains from
Lighting panel board to TPN DB'S with pin type lugs and
connections. [for LDBs]
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
16 1600 RM Supply & run of 5 of 10.0 Sqmm (phases, neutral and ONE RM 509.00
earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade
as per IS : 694 / 1990 specification flexible copper cable in
the existing conduict pipe for run of mains from Power
panel board to TPN DB"s with pin type lugs and
connections etc., complete. [for PDBs]
Makes of wires:- Finolex / RR kabel / Havells
/KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL /
GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/
Tamra/ Anchor/Plaza/Vihan/Ollvin
DISTRIBUTION BOARDS
17 75 NOS Supply and fixing single phase DB in sheet steel enclosure EACH 1909.00
with metallic plug and socket with 1 No. 20/32A,10KA 'c'
curve SPMCB (Motor characteristics MCBs) control
including making connections etc., complete concealing in
wall for A.C. points etc.
Makes : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro.
.
18 60 NOS Supply and fixing of TPN 4 way distribution board IP-43 EACH 8576.00
(8+12 Module) Protection as per IS:13032 with provision to
accommodate the ELCB incomer and suitable for single
pole outgoing MCB's in sheet Steel enclosure with 32A 4
pole MCB as incomer and 12 No of 6 to 32 Amps single
pole, 10 KA breaking capacity 'c' Curve MCB outgoings
including making connections etc., complete concealing in
wall. (LIGHTING DB's)
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro
19 60 NOS Supply and fixing of TPN 4 way distribution board IP-43 EACH 9229.00
(8+12 Mofule) Protection as per IS:13032 with provision to
accommodate ELCB as incomer and suitable for single
pole outgoing MCB's in sheet Steel enclosure with 63
Amps 4 pole MCB as incomer and 12 No of 6 to 32 Amps
single pole, 10 KA breaking capacity 'c' curve MCBs as
outgoings including making connections etc., complete
concealing in wall.
(POWER DB's)
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro
20 5 NOS Supply and fixing of SPN 8 way distribution board IP-43 EACH 4775.00
Protection as per IS:13032 flushed in wall suitable for
single pole outgoing MCB's in sheet Steel enclosure with
40Amps DP MCB as incomer and 6 No of 6 to 32 Amps
single pole, 10 KA breaking capacity 'c' Curve MCBs as
outgoings including connections and labour charges etc.,
complete concealing in wall.
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro
21 10 NOS Supply and fixing TPN - 8 way Vertical type Distribution EACH 35886.00
board with IP-43 Protection as per IS:13032 (Metal Door)
suitable to accommodate MCCB as incomer and
single/three pole MCBs as outgoings with 125A, 4Pole 25
kA MCCB as incomer with 6No of 40/63A, 10 KA TP MCBs
'c' curve and 6 No, 6-32A, 10 kA SP MCBs 'c' curve as
outgoing including making connections and labour charges
etc., complete concealing in wall.
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&T-
Newrange/Indo Asian-Opti Pro
22 5 Nos Supply and Installation of 63 Amps FP, MCCB, 25KA with EACH 9919.00
cable end boxes on suitable angle iron frame work for the
areas mentioned in the drawings including all Labours
charges massonry work etc complete with connections.
Make: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
23 5 Nos Supply and Installation of 125 Amps FP, MCCB, 25KA with EACH 13623.00
cable end boxes on suitable angle iron frame work for the
areas mentioned in the drawings including all Labours
charges, massonry work etc. complete for finished item of
work.
Make: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
24 3 Nos Supply and Installation of 250 Amps FP, MCCB, 25KA with EACH 31876.00
cable end boxes on suitable angle iron frame work for the
areas mentioned in the drawings including all Labours
charges, massonry work etc. complete for finished item of
work.
Make: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
24 135 Nos Supply and fixing of cable adopteres box with cover for EACH 600.00
DBs including, massanory work etc., complete.,
Make : Legrand(Ekinox 3) / Schneider-Acti9/Hager -
Novello+/ Seimens/Crabtree Xpro
classique-II/L&Tnewrange
EARTHINGS
28 500 RM Supply and run of No. 8SWG GI wire including cost of all ONE RM 19.00
accessories and labour charges etc complete.
29 500 RM Supply and run of 25mmX6mm GI strip including cost of all ONE RM 111.00
accessories and labour charges etc complete.
30 300 RM Supply and run of 50mmX6mm GI strip including cost of all ONE RM 198.00
accessories and labour charges etc complete.
31 150 RM Supply and run of 25mmX3mm copper strip including cost ONE RM 468.00
of all accessories and labour charges etc complete.
FIXTURES
32 1780 NOS Supply, Fixing and Transportation of 18W/20W, 1200mm EACH 952.00
length LED batten light with extruded alluminium housing
and polycarbonate cover, input voltage AC 220 - 260 Volts
with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt
driver and frosted cover CCT: 3000K - 5700K, minimum
CRI>70, .etc., complete. with Fixing of 18W/20W LED
luminaire on wall / Ceiling with / TW round blocks with all
accessories including giving connections and all labour
charges etc., complete.
Makes: a) LUMINAIRE : Phillips / GE-Venture /
Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready / Surya /C&S/ Fortune Art / Syska /
Enrich / Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/
Orbit/Panasonic /Trinic /Lumens
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / EVERLIGHT.
33 40 NOS Supply, Transportation and fixing of 9W LED Down lighter, EACH 1134.00
suitable for Recessed / Surface mounting made of diecast
alluminium body with powder coating, acrylic diffuser with
Driver, operating voltage range of 150 to 265 Volts AC, P.F
> 0.9, Surge protection: 2KV, THD<10% with high power
LED's having efficacy of > 120 lumins / watt, CCT: 3000K -
5700K, minimum CRI > 70, Luminaire performance
complies to IS 10322 (Part 5 / Sec-3) etc., complete a)
a) LUMINAIRE MAKE : Phillips /Lighting
Technologies(LT) / GE-Venture / Crompton / Wipro /
Bajaj / Havells / Halonix/Jaquar/HPL/GM / Surya /C&S/
Fortune Art / Syska / GreenLites / Gold Medal / Enrich /
Capart / Pharox / Stanjo /
Goldwyn/VIN/Ib LED/Promtec/Eveready/Opple
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG/ EVERLIGHT / San'an
34 50 NOS Supply, transportation and fixing of .36 W Recessed / EACH 3749.00
Surface mounting 2' x 2' ' (600x600 mm)LED luminaire
made of CRCA sheet housing with powder coated with
acrylic diffuser, Constant current out put of Driver as per IS:
15885 (Part 2/ Sec 13) : 2012 operating voltage range of
150 to 265 Volts AC, Power factor > 0.9 high power LEDs
having efficacy of > 90 lumens/watt, junction temparature
less than 85 degrees centigrade and THD is less than 10%
etc., complete
Makes : Phillips / GE-Venture / Crompton / Wipro / Bajaj
/ Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready / Surya /C&S/ Fortune Art / Syska /
Enrich / Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/
Orbit/Panasonic/Trinic/ilite
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / EVERLIGHT.
( SSR -19-20 - 3.8.21 +Overheads&Contractors Profit
@13.615% )
35 4 NOS Supply, Fixing and transportation of 90W LED HIgh Bay EACH 11662.00
Luminaire with high power COB LED made of pressure
diecast alluminium housing with powder coated,Supply
Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's having efficacy >100 lumines/watt, System efficacy
>95lm/W and junction temprature < 70°C, with Ingrees
protection IP66, IK05, Driver surge protection 4KV, external
Surge protection ≥ 5KV with wide/ Narrow beam optics,
THD<10% at 110 Volts AC, driver efficiency >90%, , CCT:
3000K - 5700K, minimum CRI>70, etc., complete with
suitable suspension arrangement including all labour
charges and conveyance of all materials etc complete with
wire leads and connections.
a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /
Crompton/ Bajaj /Greenlites /
Havells/Capart(Premium)
/Halonix/Polycab/Keselec/HPL/Jaquar/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG
35 230 NOS Supply and Fixing of batten holder/angle holder on existing EACH 56.00
block with 0.5W LED Lamp with input voltage 90 to 300V,
Colour temparature 3000k - 6500k, Beam angle 170 - 220
degrees, B22 base and all labour charges etc., complete.
In lieu of ceiling rose.
Makes: Phillips /Crompton / Bajaj / Havells /
Halonix/GM/HPLSyska / Green Lites /
Fortune Art / GoldMedal /R LED/Luker/Leo/Orbit
36 200 NOS Supply and fixing of BH/SBH in lieu of ceiling rose with 1 EACH 12.00
NO 3-5 W bulb with connections etc., complete with labour
charges
Makes: Phillips / Crompton / Bajaj / Surya / Style Lamp /
Capart
37 20 NOS Supply and fixing of call bell on 6"x8" decolam block EACH 192.00
including giving connections, cost of all accessories and
labour charges etc., complete.
Makes: GM G Home / Gold Medal Olive / Million Zoom /
Great white Omega/Koncept/Vimal opel/
Anchor/Vihan/CPL
38 10 NOS Supply and fixing of buzzer on 4"x4" decolam block EACH 153.00
including giving connections, cost of all accessories and
labour charges etc., complete.
Makes: GM G Home / Gold Medal Olive / Million Zoom /
Great white Omega/Koncept/Vimal opel/
Anchor/Vihan/CPL
39 10 NOS Supply and fixing of Ding dong bell on 6"x8" decolam block EACH 272.00
including giving connections, cost of all accessories and
labour charges etc., complete.
Makes: GM G Home / Gold Medal Olive / Million Zoom /
Great white Omega/Koncept/Vimal opel/
Anchor/Vihan/CPL
40 5 NOS Supply and fixing of Electronic Music bell on 6"x8" decolam EACH 368.00
block including giving connections, cost of all accessories
and labour charges etc., complete.
Makes: GM G Home / Gold Medal Olive / Million Zoom /
Great white Omega/Koncept/Vimal opel/
Anchor/Vihan/CPL
41 475 NOS Supply and Transportation of 48" (1200mm) Sweep 5 star EACH 2318.00
rated Ceiling Fan , with double ball bearings, air delivery
more than 200 cubic meter/min but without Regulator.
Makes : Crompton HS Plus / Havells ES Neo/Orient
Energy Star/ Halonix(Zephyr) /Polycab(Synergy Star)
42 475 NOS Supply and Fixing of modular Electronic step type fan EACH 511.00
regulator hum free step type socket size with MS box, front
plate in the existing switch board ( Modular Type )
44 475 NOS Labour charges for Fixing of Ceiling fan including giving EACH 158.00
connections with twin core wire etc., complete.
45 100 NOS Supply and Transportation of 12" (300mm) Light duty EACH 1680.00
exhaust fan with metalic blades and wire guard etc
complete.
Crompton / Bajaj Bahar WG / Havells Ventil Air- DB /
Orient hill air/Halonix /Polycab
46 95 NOS Supply and Transportation of 12" (300mm) ISI, 900 RPM EACH 3187.00
Heavy duty exhaust fan with metallic blades with Mark.
Makes: Crompton / Almounard / Havells Turbo Force.
47 195 NOS Labour charges for fixing of Exhaust fan in wall with EACH 675.00
necessary connections and masonary work of making hole,
finishing etc., complete.
48 195 NOS Supply and fixing of louver shutter suitable for 12" Exhaust EACH 229.00
fan including all labour charges etc complete with
connections and colouring matching to the wall with enamel
paint.
U.G CABLES
228 500 RM Earth work excavation of Trench in hard ground soil, laying ONE RM 259.00
of U.G cables on sand cusion covering the cable with bricks
and back filling of Trench duly providing route indicator (as
per general instruction S.No. 14 of SSR) embedded in C.C
including cost and conveyance of materials and labour
charges etc., complete.
229 1000 RM Labour charges for run of U.G cable on wall / existing pipe ONE RM 44.00
with necessary fixing arrangments such as saddles,
clamps,wooden separators etc., (as directed by
departmental official) for the cables.
CABLE GLANDS:
230 S&fixing of heavy duty flange type brass cable glands of
following sizes for PVC armoured cables with brass
washers, earth tag etc complete including all labolur
charges.
a 12 NO 300 Sq.mm EACH 1023.00
b 12 NO 240 Sq.mm EACH 738.00
c 12 NO 185.00 Sq.mm. EACH 625.00
d 12 NO 150.00 Sq.mm. EACH 511.00
e 20 NO 120.00 Sq.mm. EACH 284.00
f 20 NO 95.00 Sq.mm. EACH 239.00
g 30 NO 70.00 Sq.mm. EACH 199.00
h 30 NO 50.00 Sq.mm. EACH 182.00
i 30 NO 35 Sq.mm. EACH 170.00
j 30 NO 25 Sq.mm. EACH 114.00
ALUMINIUM LUGS:
231 Supply and fixing of crimping type Aluminium lugs
confirming to IS specifications for following cables including
nuts and bolts with connections.
a 20 NO 300 Sq.mm EACH 114.00
b 20 NO 240 Sq.mm EACH 91.00
c 20 NO 185.00 Sq.mm. EACH 62.00
d 30 NO 150.00 Sq.mm. EACH 51.00
e 30 NO 120.00 Sq.mm. EACH 45.00
f 40 NO 95.00 Sq.mm. EACH 40.00
g 40 NO 70.00 Sq.mm. EACH 34.00
h 40 NO 50.00 Sq.mm. EACH 28.00
i 50 NO 35 Sq.mm. EACH 23.00
j 50 NO 25 Sq.mm. EACH 17.00
STREET LIGHT
233 10 NOS Supply and transportation of 30 W LED Street light EACH 3522.00
Luminaire made of pressure diecast alluminium body with
powder coated, having protective toughned glass, Supply
Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's having System efficacy > 100 lm/W and junction
temprature < 70°C, with Ingrees protection IP66, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), Driver
surge protection 4KV, external Surge protection 10 KV with
optics distribution , THD<10% at 110 Volts AC, driver
efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70,
etc., complete
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) / GE-Venture / rompton(Hawk/Nexus star) / Bajaj
(Edge) / Halonix(Lumos - Super) / Havells (Endura
Pearl) /Capart(Premium)/Greenlites(Hi-Lux)
/Polycab/Keselec/ HPL(City Vision)/
Jaquar(Premium)/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG
234 10 NOS Supply and transportation of 60 W LED Street light EACH 6703.00
Luminaire made of pressure diecast alluminium body with
powder coated, having protective toughned glass, Supply
Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's having System efficacy > 100 lm/W and junction
temprature < 70°C, with Ingrees protection IP66, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), Driver
surge protection 4KV, external Surge protection 10 KV with
optics distribution , THD<10% at 110 Volts AC, driver
efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70,
etc., complete
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) / GE-Venture / rompton(Hawk/Nexus star) / Bajaj
(Edge) / Halonix(Lumos - Super) / Havells (Endura
Pearl) /Capart(Premium)/Greenlites(Hi-Lux)
/Polycab/Keselec/ HPL(City Vision)/
Jaquar(Premium)/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG
235 20 NOS fixing of LED / MV / SV/ MH luminaire on wall with 1.0Mtr EACH 595.00
of 40mm dia GI pipe bracket and anti tilting MS Flat with
2.5 Sq.mm flexible copper wire etc.,including all labour
charges for mason work and giving connections etc.,
complete.
TV WIRING
236 1000 RM Supply and laying of RG6 co-axial cable in the existing ONE RM 29.00
metallic/non metallic conduit pipe with connections
etc.,complete for TVs and CCTV Net work.
Makes: Finolex/ Million / Gold Medal / Anchor / Polycab
237 10 Nos Supply and fixing of TV outlet Modular type in existing MS / Each 261.00
modular box with modular front cover plate with screws
connections etc., complete.
Makes: Legrand Arteor / Schneider Zen celo/ Crabtree
Murano or Amare/L&T-englaze/
GM-Zenova/Goldmedal(i- Push)
239 Supply and Laying NP2 class RCC hume pipe with bends,
Collars and other accessores of following siges including
trench excavation for laying the same with RCC incsing
around.
a 30 RM 300 mm ONE RM 348.00
WATER COOLERS
240 2 NOS Supply and fixing of water cooler fully stainless steel of Each 42994.00
capacity 60/120 to be operated on single phase supply with
ISI mark.
Makes Blue star / Voltas / Usha.
242 Supply and Fixing of Spring Bracket with fixing kit for
400Amps, Air Insulated Busduct / Raising Mains. Makes:
Legrand (Zucchini) / C&S/Advance-Anant
a 10 NO 400Amp, 50 - 53KA Each 5908.00
243 Supply and fixing of Flange end for 400Amps for Air
insulated Busdusts . Makes: Legrand (Zucchini) / Schiender
/C&S/Advance-Anant
a 10 NO 400Amp, 50 - 53KA Each 10225.00
244 30 NO Supply and Fixing of 125Amps Tap off box for Air Each 13520.00
Insulated Busduct.
Makes: Legrand (Zucchini) / C&S/Advance-Anant
245
Supply and Fixing of Adjustable, Confirms to IEC 60947-2
and IS 13947-Part 1&2 having Breaking Capacity with
thermal magnetic release Panel Mounted.
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak2
a 2 NO 250A 4 Pole MCCB,36/35 KA Each 23234.00
b 2 NO 400A 4 Pole MCCB,36/35 KA Each 28972.00
246 5500 RM Supply and laying of 2 pair telephone wire 0.5mm copper ONE RM 20.00
in the existing metallic/non metallic conduit pipe with
connections etc., complete.
Makes: Finolex / Delton / Surabi / Polycab
247 180 NOS Supply and fixing of 2 Line telephone jack socket model Each 249.00
modular type with connector front and back plate in existing
modular box with screws connections etc., complete.
Makes: Legrand Arteor / Schneider Zen celo/ Crabtree
Murano or Amare/L&T-englaze/
GM-Zenova/Goldmedal(i- Push)
249 4 NOS Supply, Installation, Testing and commissioning of Digital Each 16701.00
key Telephone instruments with at least of 16
programmable keys, LCD display, fully hands fee etc.,
complete with connectors.
Makes: NEC/ Alcatel /Avaya/Seimens
250 180 NOS Supply, Installation, Testing and commissioning of Non each 495.00
caller ID push button Telephone instruments etc.,
complete with connectors.
Make : Beetel / NEC/ Alcatel /Avaya/Seimens.
251 2 NOS Supply, Installation, Testing and commissioning of IP each set 47150.00
Gateway Card and SIP Extension License ( IP Extensions
8 ) etc., complete.
252 2 NOS Supply and fixing of 16 Port Analog Extension Module etc., each 22609.00
complete.
Makes : NEC/ Alcatel /Avaya/Siemens
253 2 NOS Supply and fixing of 200 pair MDF krone pair box with MS Each 9312.00
enclosure with lock and key arrangement etc complete with
all labour charges.
Makes: Krone or its equivalent.
254 2 Nos Supply and fixing of 50 pair MDF krone pair box with MS Each 2719.00
enclosure with lock and key arrangement etc complete with
all labour charges.
Makes: Krone or its equivalent.
255 5 Nos Supply and fixing of 20 pair MDF krone pair box with MS Each 1376.00
enclosure with lock and key arrangement etc complete with
all labour charges.
Makes: Krone or its equivalent.
256 5 Nos Supply and fixing of 10 pair MDF krone pair box with MS Each 847.00
enclosure with lock and key arrangement etc complete with
all labour charges.
Makes: Krone or its equivalent.
257 1 Nos Supply, Installation, Testing and commissioning of ISDN Each 53683.00
PRI Card. Make: Karel, Mofel: EX 200(IS2/0)
258 500 RM Supply and laying of 10 pair telephone wire 0.5mm copper ONE RM 51.00
in the existing metallic/non metallic conduit pipe with
connections etc.,completeTelephone wire
Makes: Finolex / Delton / Surabi / Polycab.
259 500 RM Supply and laying of 20 pair telephone wire 0.5mm copper ONE RM 91.00
in the existing metallic/non metallic conduit pipe with
connections etc.,completeTelephone wire
Makes: Finolex/Delton/ Surabi/ Polycab.
260 300 RM Supply and laying of 50 pair telephone wire 0.5mm copper ONE RM 216.00
in the existing metallic/non metallic conduit pipe with
connections etc.,completeTelephone wire
Makes: Finolex/Delton/ Surabi/ Polycab.
LAN
261 250 Nos Supply and Fixing installation testing and commisioning Each 522.00
of1no of Cat6 Tooless builtin crimping mechanism
Information Outlet with Dust Cover Exceed ANSI/TIA-568-
C.2 and ISO/IEC 11801 standards with 1module face plate
for Category 6 component performance & Compatible to
T568A,T568B wiring pattern and UL-940V0 Rated Plastic
&RoHS Compliant
Makes: Systimax /AMP/ Panduit/ Siemond/
Molex/Legrand
262 7500 RM Supply,laying ,testing and commisioning of 4-pair, Cat6 ONE RM 47.00
Solid (Third party ETL Intertek tested 600 MHZ above) to
support 1Gbps with Cross (+) filler pair seperator & PVC
sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA-
568-C.2 and UL Listed &RoHS Compliant in the existing
raceways /pvc conduits including making connections to
information outlets and patch panels with ferruling at both
ends for identifiation with necessary tools for punching
stripping crimping and testing required etc., complete
Makes: Systimax /AMP/ Panduit/ Siemond/
Molex/Legrand
263 12 NOS Supply and Fixing, Installation, Testing and Comissioning EACH 6602.00
of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis ,
powder coated Modular Patch Panels (upgradable to
intelligent panels with use of sensor strips) with collapsible
shutters on jacks to support latest ammendments of TIA /
EIA Cat 6 Specifications in Existing Communication Rack
along with necessory connections of Cat 6 UTP Cables,
With Rear Cable management trays and clamps.
1) 24 Ports Patch Panels
Makes: Systimax
/Legrand/Molex/Panduit/Siemond/AMP
264 10 NOS Supply and Fixing, Installation, Testing and Comissioning EACH 8670.00
of Wall mounted Communication rack in two sections viz
rear wall mount Section and hinged front section with glass
doors, swing handles ,lock , Top and Bottom Cable
entries,Supports for mounting rack on wall , Cable
managers, Fan tray with 2 x 230 Volt fans, Equipment
mounting hardware, wire managers , power supply box for
supplying power to hubs, fans etc along with earth
continuity kit, Mcb, indicator, moulded power supply cable,
Blank panels , sliding shelves etc.
1) 15 U(44 mm ) wall mounted
Make: APW/HCL/Valrack/Netrack
265 12 NOS Supply and Fixing, Installation ,Testing and Commissioning EACH 15123.00
of Small
Business 24 port Gigabit Managed Switch ,
Make :Cisco Model SG350-28 or equivalent in
Juniper/Extreme
266 20 Nos Supply and installation testing and commissioning of 15 Each 2107.00
Watt column speaker (Makes: Philips/eqvt) including cost
all taxes etc complete for finished item of work as directed
by the engineer-in-charge.
267 5 Nos Supply of wire less Hand Held Microphone with receiver Each 2160.00
Model No: PVD-57 ( H) etc.
Make : Mega.
268 1500 RM Supply and laying of shielded twin twisted pair 1.0 sqmm ONE RM 38.00
cable in existing conduit.
269 4 Nos Supply, installation, testing and commissioning of 120W Each 9465.00
amplifiers for public addressing system suitable for
operation on 230V, 50 Hz single phase Ac supply including
all labour charges etc., complete.,
270 20 Nos Supply and Fixing of Focus Wall Speaker - 30 watts Each 3435.00
including labour charges etc., complete.
Make: Ahuja - WB - 330T/PHILIPS /Mega.
271 4 Nos Supply and Fixing of Paging Microphone including labour Each 2290.00
charges etc., complete.
Make: Ahuja - ACM - 66/PHILIPS /Mega.
272 4 JOB Testing and commissioning of the Public Address system Each JOB 2000.00
a 10 NOS 1.5 TR 3 Star capable of delivering 18000 BTU / hr and Each 49911.00
above with operating on refrigerant R-32 / R-410A
Makes: Blue Star 3HW18VCTU / Daikin FTE-M or N
Sereis / Hitachi / Voltas / Carrier Superia.
b 10 NOS 2.0 TR 3 Star capable of delivering 24000 BTU/ hr and Each 54547.00
above with operating on refrigerant R-32 / R-410A
Makes: / Hitachi / Blue Star 3HW24LBTU / Daikin /
Voltas / Carrier Superia.
V - FIRE EXTINGUISHERS
274 10 Nos Supply and fixing of ISI mark (IS:15683) Mono ammonium EACH 5908.00
phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored
pressure type, pressure gauge, gross wt. 9.4 kg, empty
wt.3.4 kg, Discharge time minimum 13 sec, controllable
discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating -4 A, B
rating -34 B, can construction: Deep drawn and Co2 mig
welding, Valve construction: Forging & Machining, internal
coating of can: Epoxy powder coating, External coating of
Can:Epoxy polyster powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5
years warranty Including transportation, all taxes and all
labour charges etc complete.
Makes: Safex / Kenex / Bharat / Reliance/NewTech
( SSR - 19-20, Item NO: 9.4.8 +Overheads&Contractors
Profit @13.615% )
275 20 NOS Supply, installation, Testing and commissioning of IP Bullet Each 17295.00
Camera as per the specifications as follows:-
* 2 Megapixel 1/2.8" SONY 2MP High-resolution CMOS
Sensor
* Fixed Lens 3.6mm 2.0 focal length
* Video Process H.264 Standard compression, supply Dual
stream adjustable 50K~8M,1-25PFS
* Video Resolution 1920 × 1080
* Dual streaming
* Camera should be POE ( Power Over Ethernet)
* Camera should support ONVIF
* Built in IR cut filter with auto switch
* Ingress Protection rating should be IP65
* IR range should be upto 30 Meters
* Network protocol:
TCP/UDP/HTTP/MULTICAST/UPnP/NTP/RTSP/Onvif/FTP
* Should Support WEB,OSD,Real-time video
transmission, support motion detection and IO Alarm;
Linkage front-end storage/snap, supporting the front store,
support the motion detecting and IO alarm linkage center
alerts and screen after
Makes: Pelco/Travizia/Honeywell/RGP/Axies/Tyco.
276 20 NOS Supply, installation, testing and commissioning of 16 Each 46076.00
chanel Network Video Recorder (NVR)with following
specifications
* incomming upto 100 Mbps
* Outgoing upto 80 Mbps
* Recording Capability 16-ch@4CIF, 12-ch@720P,
6-ch@1080P
* 2 SATA Interfaces for two HDDs
* Recording Capability 16-ch@4CIF, 12-ch@720P,
6-ch@1080P
* Flexibility of recording at multiple resolutions up to 5 MP
* Recording resolution 5MP/3MP/1080P/UXGA/720P/
* VGA/4CIF/DCIF/2CIF/CIF/QCIF
* Supports both HD and Full HD recording
* HDMI/VGA output options
* Motion Detection Control
* Privacy Mask Control
* ONVIF supported
Makes: Pelco/Travizia/Honeywell/RGP/Axies/Tyco
277 1 NOS Supply, installation, testing and commissioning of 6-Bay Each 135375.00
Network Attached Storage (NAS) with 6X4TB HDD
Makes: Seagate/Netgear/Toshiba
278 3 NOS Supply, fixing, testing and commissioning of 8 port Each 16295.00
10/100/1000 + 2 SFP combo port L2 smart managed
switch.
Make: D-Link/Netgear/Cisco
279 18 NOS Supply, fixing, testing and commissioning of Single mode Each 4500.00
SFP module.
Make: D-Link/Netgear/Cisco.
280 12 NOS Supply and Fixing of 6 Port Fiber distribution unit (FDU/LIU) Each 8246.00
loaded with couplers etc. with labour charges, professional
charges, giving connections etc., complete.
Make: D-Link/ Molex/ AMP/Legrand/ Krone.
282 175 NOS Supply, fixing and termination of pigtails for fiber Each 350.00
connectivity. Make: D-Link/Molex/AMP/ Legrand/ Krone
283 1000 RM Supply and run of 6 core (Indoor/Out Door), Single mode ONE RM 75.50
armoured Optical Fiber Cable in existing PVC conduit
including all labour charges, professional charges, etc.,
complete as directed by engineer in charge.
Make: D-Link/AMP/ Molex/ Legrand/ Krone
284 25 NOS Supply and Fixing of Subscriber connector (SC) to SC/LC Each 1813.00
patch cord of 1 Meter length.
Make: D-Link/ Molex/ AMP/ Legrand/Krone
285 200 Core Labour Charges for Optical Fiber Cables Splicing in Each 350.00
professional manner.
286 850 RM Supply,laying ,testing and commisioning of 4-pair, Cat6 ONE RM 47.00
Solid (Third party ETL Intertek tested 600 MHZ above) to
support 1Gbps with Cross (+) filler pair seperator & PVC
sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA-
568-C.2 and UL Listed &RoHS Compliant in the existing
raceways /pvc conduits including making connections to
information outlets and patch panels with ferruling at both
ends for identifiation with necessary tools for punching
stripping crimping and testing required etc., complete
Makes: Systimax /AMP/ Panduit/ Siemond/
Molex/Legrand
287 1 NO Supply and Fixing, Installation, Testing and Comissioning EACH 8670.00
of Wall mounted Communication rack in two sections viz
rear wall mount Section and hinged front section with glass
doors, swing handles ,lock , Top and Bottom Cable
entries,Supports for mounting rack on wall , Cable
managers, Fan tray with 2 x 230 Volt fans, Equipment
mounting hardware, wire managers , power supply box for
supplying power to hubs, fans etc along with earth
continuity kit, Mcb, indicator, moulded power supply cable,
Blank panels , sliding shelves etc.
1) 15 U(44 mm ) wall mounted
Make: APW/HCL/Valrack/Netrack
288 1 NOS Supply and Fixing of 55" Full HD LED for side Audience, As Each 150485.00
1920 x 1080 (16:9) resolution & 170°/160°(H/V) viewing
angale, with HDMI & VGA Interface etc., complete.,
Makes: Samsung/Panasonic/LG
289 1 NOS Supply and Fixing of Celing Mount Kits for front LED etc., Each 13211.00
complete.
(Make: Customs)
290 20 RM Supply and fixing of 32 x 20 mm DLP PVC Mini-trunking ONE RM 195.00
with independent cover on wall/ ceiling including cost of all
accessories like end caps, Internal/External angles, flat
Angles, flat joints etc., with all labour charges, transportaion
etc., complete.
Make: Legrand/ Modi/ Honeywell
291 20 RM Supply and fixing of 105/100 x 50 mm DLP PVC Trunking ONE RM 1193.00
with flexible cover on wall/ ceiling including cost of all
accessories like end caps, Internal/External angles, flat
Angles, flat joints etc., with all labour charges, transportaion
etc., complete.
Make: Legrand/ Modi/ Honeywell
292 350 RM Manufacture, Supply, & Delivery of HDPE Pipes OD 25mm ONE RM 43.00
dia, PE-100 grade, 16 Kg/Sq. cm, conforming to IS 4984 -
1995 including transportation to any where in A.P,
excluding excise duty, sale tax and specials etc., complete.
(supply upto 90 mm dia in coil & above 90 mm dia straight
length in 6 m)
293 400 RM Laying, jointing of PVC/HDPE pipes of sizes 25mm dia as ONE RM 28.00
per BIS No.7634 part-III/75 for PVC and BIS No.7634 part-
II/75 for HDPE pipes including trench excavtion and refiling.
296 5 Nos Supply and providing of battery rack upto 11 to 20 EACH 5681.00
batteries (42 AH)
HVAC Units
Nominal Capacities:
a 3 No 24HP (14TR actual capacity at 45 deg. C ambient) Each 260000.00
APPROVED MAKE : Bluestar / Voltas / Thosibha/ Daikin
300 2 SQM Supply and installation of powder coated linear supply air One SQM 6500.00
grilles/Preforated sheets with VCD & Plenum box
.APPROVED MAKE : Cosmic / System air / carry air
/Equivalent
301 2 SQM Supply and installation of powder coated return air grilles One SQM 4000.00
APPROVED MAKE : Cosmic / System air /
carry air / Equivalent
302 3 SQM Supplying and installation of Aluminium Volume control One SQM 7500.00
dampers with flanges for mounting on branch ducts and
units etc complete.
APPROVED MAKE : Cosmic / System air / carry air /
Equivalent
303 2 SQM Supply and installation of fusible link mechanical Fire safety One SQM 6500.00
dampers according to NFPA 90A and UL 555. The casings
and blades of fire dampers shall be constructed of zinc-
coated steel of at least 1.9 mm thickness.
306 30 SQM Supply and installation of Thermal insulation with 25mm One SQM 1500.00
thick Nitrile rubber/ XLPE with Aluminum cladding fixed to
the external surface of ducts with suitable adhesives as
recommended by manufacturers. (for exposed ducts)
APPROVED MAKE: K- flex / Supreme /Paramount / Arma
flex.
306 30 SQM Supply and installation of Thermal insulation with 19mm One SQM 575.00
thick Nitrile rubber/ XLPE faced with Aluminum foil fixed to
the external surface of duct with Al foilceds with suitable
adhesives as recommended by manufacturers.
APPROVED MAKE: K- flex / Supreme /Paramount / Arma
flex.
307 1 SQM Supply & Erection of 18G Aluminium Backdraft Dampers at One SQM 7500.00
inlet of AHU unit Approved Makes: Airmaster, Systemair,
carryair.
309 25 Rmt Supply and Fixing of Armoured Electrical cable One RM 228.00
Interconnecting between AHU unit and out door units for
Condensing Units as per standards Approved Makes:
Finolex, Fine cab.(3.5Core x 35 Sqm)
310 200 Kgs Supply & Fixing of MS structural support for mounting of One Kg 63.00
Floor mounted AHU with 50 x 50 x 5 mm angle finished
with Epoxy painting as per standard practice
311 80 SQM Supply and Fixing of Modular OT Wall and Ceiling One SQM 5459.00
Paneling: Wall & Ceiling with PPGI Panel Having 50 mm
thick with PUF (Polyurethane Foam) and thickness not
less than 0.6 mm thick in room side and 0.6 mm thick in
wall side having density of 40 Kg / M3. Including of all joints
with silicon sealant. Make: Tata/ Jindal
312 55 RM Supply and Laying of Coving : Supply and installation of One RM 642.00
Aluminium Extruded profiles with 1.50mm thick. Coving has
executed as male and female. Gemale coving with "V"
Groove for clip grip for male & supporting at wall to ceiling,
wall to wall & wall to floor. Male coving with clip on type
power coated / PPGI Nickel - Chrome Anodizing radius - R
70. to avoid dust accumulation at 90 deg. places like wall to
floor, wall to wall & wall to ceiling. Make :- Sumangalam /
Zindal.
wall to wall and wall to ceiling
313 15 RM Supply and application of epoxy coving of light green or One RM 385.00
light blue colour with SIKA brand with 50mmX50mmwidth
at the corners of the walls including cost and conveyance
of all materials and labour charges etc.,complete for
finished item of work for Operation Theatres wall to flooring
and wall to wall.(Make
:Cipy/SIKHA/ARDEX/STRIDEX/TARKET)
314 22 SQM Supply and Fixing of Epoxy Flooring: Seamless with One SQM 2959.00
perfectly curved resistance and dynamic loads and having
conductive protection characteristics, 3 mm thick, washable
Epoxy flooring and Before apply epoxy apply ESD self
leveling - eletrotape copper foil / Copper grounding strips
(0.05 mm thick, 50mm width) is used to create ground
grids for peel and stic ESD flooring and ESD matting also
ESD primer,screading and topping for self leveling
(Make :Cipy/SIKHA/ARDEX/STRIDEX/TARKET)
315 15 SQM Supply and application of epoxy flooring of light green or One SQM 1940.00
light blue colour in Operation Theatres - Epoxy seamless
joint free finish with 3mm thickness and anti slip & water
washable chemical resistance durable and non particle
shedding with attractive finishing including cost and
conveyence of all materials and all labour charges etc.,
complete for finished item of work.
Make : Cipy/SIKHA/ARDEX/STRIDEX/TARKET)
316 3 No Supply and Fixing of Pass Box SS 304 (Size: 2’*2’) can be Each 63500.00
provided in operation theatre to remove waste materials
from the operation theatres to Dirty linen area just adjacent
to Operation Theatre. Pass Box is equipped with two doors
and the door shall operate electronically. The Pass Box is
designed in such a way that only one door should be
opened at one time. The UV light shall be installed in
chamber. Make: CZS /BLS / SS 304 Zindal
317 3 Nos Supply and Fixing of Two Plate X-Ray Viewing Screen Each 32500.00
designed to provide a high level of control luminance
without flicker. Size - 950 x 650 x 115 mm (Make :
Mediconz International - Country of Origin -India ,
Srimodular / CZS / Altos)
318 3 Nos Supply and Fixing of Writing Board of size 950 x 650 x 75 Each 10000.00
mm with 50 mm thick and consealed in wall panelling
( Make : CZS /BLS / Altos / Srimodular / Mediconz or
equavalent)
319 30 SQM Supply and application of poly urethene (P.U) of light green One SQM 808.00
or light blue colour with 1mm thickness with anti fungal and
anti bacterial chemical resistance durable and non particle
shedding including cost and conveyance of all materials
and labour charges etc., complete for finished item of work
in Operation Theatre walls and ceilings
320 15.60 SQM Providing & Fixing of Scientific Doors with metal door One SQM 9971.00
frames and door shutters made of galvanize steel (base
steel as per IS 513 of 0.58 mm thick D quality, galvanized
as per IS 277 with Zinc of 120 GSM). coated with Zinc
Phosphate Primer to receive any paint on site or finished
with Thermosetting Polyurethane paint of Aliphatic Grade
providing high levels of scratch resistance and
durability/Epoxy polyester powder for powder coating paint
thickness 50-60 microns (Dry film thickness) outer frame
section of 100 x 58 mm x 1.2 mm thick, shutter section of
0.80 mm thick galvanized steel sheet pressed (roll formed)
for 46mm thick fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb Kraft paper used
to give the required rigidity and effective acoustic insulation
with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10”
Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Lock of
approved quality – 1 No, frames fixed to the
concrete/masonry wall by means of self expanding screws
including etc., complete for finished item of work for Double
leaf Door
321 3 Nos Supply and Fixing of Surgucal Scrub: Surgical scrub sink Each 68820.00
should be designed for use in OT complex providing
Surgeons with a convenient sink for pre – OT scrub up.
Each fixture should be fabricated with 18 SWG gauge type
304 stainless steel and should be seamless welded
construction, polished to a stain finish. The scrub sink
should be provided with a water controlled value, waste
connections, stoppers and strainers. 4 Feet Length and 3
Feet Hight with 2 Foot operated and 2 elbow taps should
be there.
Make : Zindal/ Tata
322 3 Nos Supply and Fixing of Surgeon Double Arm Pendant - Each 235000.00
Comprising of
- 1 x Arm 800 & 1 x Arm 800 having a
- 1 x drop tube having a carrying capacity of maximum
load of 80 kg
-Rotation of 330 deg.
- 1 x Basic Console - 750 mm
- 1 x Fixed shelf (350x350x50 mm)
- 1 x Adjustable shelf (350x350x50mm)
- 6 x Mains Socket (5/15Amp)
- 6 x Medical Gas Terminal & Hose Assembly
(2 x Oxy, 2xVac, 1xAir(4bar), 1xAir(7bar), 1xN2O, 1xCO2,
Provision for CO2 Data & A/V 2 nos.)
Make : Meditech / Altos / Aravali / Digiline or Equqalent)
323 3 Nos Supply and Fixing of Anesthesia Single Arm Pendant - Each 175000.00
Comprising of
- 1 x Arm 800 mm having a
- 1 x drop tube having a carrying capacity of maximum
load of 80 kg
-Rotation of 330 deg.
- 1 x Basic Console - 600 mm
- 1 x Fixed shelf (350x350x50 mm)
- 1 x Adjustable shelf (350x350x50mm)
- 6 x Mains Socket (5/15Amp)
- 6 x Medical Gas Terminal & Hose Assembly
(2 x Oxy, 2xVac, 1xAir(4bar),1xAir 7 Bar,1x N20 , Provision
for
AGSS, Data & A/V 2 nos.)
( Make : Meditech / Altos / Aravali / Digiline or Equqalent)
326 3 SQM Supply and Fixing of SS/GI Perforated air Grills with AL One SQM 11520.00
VCD as per standard practice. Approved Makes: Airmaster,
Systemair, carryair or equavalent
327 3 Lot Supply Instalation, testing and commissioning of 60 to 100 One Lot 2500.00
degrees F heat Thermostat including making connections
and soldering etc, complete.
Make: Honey Well / Johnson / Siemanes
328 3 Lot Supply, Instalaltion, testing and commissioning of 0 to 100 One Lot 2500.00
RH pressure guage Humidistate including making
connections and soldering etc, complete.
Make : Honey Well / Johnson / Siemanes
329 3 Lot Supply, Instalaltion, testing and commissioning of Pressure One Lot 6500.00
sensor for VDF including making connections and soldering
etc, complete.
Make : Honey Well / Johnson / Siemanes
339 25 NOS Supply and Installation of Multi Connection Joint / Ref Nets EACH 4772.00
for IDUs
340 3 NOS Supply and Installation of Multi Connection Joint / Ref Nets EACH 5454.00
for ODU connections- AT OUT DOOR UNITS
HVAC Panel ( RHS & LHS)
341 1 NOS Supply, installation, testing and commissioning of wall/floor EACH 185234.00
mounting type panel board with alluminium bus bars
fabricated with 16 Gauge CRCA Sheet comprising of TPN
bus bars of equal size in all phases and neutral equipped
with bus bar chambers and cable chambers.The bus bars
fault level shall be 50 KA and shall be as per the
requirement of local CEIG, fire regulations, CPRI norms
and other authorities etc. The painting of the complete
system shall be powder coated duly processing the panel
in 7 tank process. The panel shall be suitable for
accomdating the following switch gear including supply of
all components, hard wares etc including all necessary civil
works, adequate reinforcement, foundation bolts, suitable
G.I earth strip 50 x 6mm, door loop earthings, bus bars
should be colour sleeved with heat shrinkable sleeves for
phase and neutral duly supported at regular intervels by
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for Panel shall be
manufacture only from CPRI approval Fabricators.
a 100 RM 3.5 Core 25 Sq.mm. - HVAC Panel to Out Door Units ONE RM 239.00
343 Supply and making one end termination with heavy duty
double compression brass gland as per BS 6121:2005 ,IP
66 complete,SIBG type, heavy duty Alluminium lugs duly
crimped with crimping tool, PVC tape etc for following size
of Armoured PVC insulated & PVC sheathed/ XLPE
344 100 RM Labour charges for run of U.G cable on wall / existing pipe ONE RM 44.00
with necessary fixing arrangments such as saddles,
clamps, wooden separators etc., (as directed by
departmental official) for eath connections for the cables.
WATER HEATERS
349 Supply,Transportation and fixing of storage / Pressure type
Vertical / Horizontal 230/250V single phase 2000watts ISI
mark 5 Star rated water heater with SS tank and ABS
plastic body of ........ capacity to withstand up to 6.5 bar of
water pressure including all standard accessories and dead
weight pressure reducing valve on out let side, including
cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and
all labour charges etc., complete.
Makes : Crompton Solarium BLX / Jaquar Elena /
Venus Lyra / Racold Eterno Swift /
AO Smith HSE SDS /Havells Puro Turbo/Warmex
351 26 Nos Supplying and fixing of hose cabinet of size 750mm X EACH 3295.00
600mm x 250mm made of No 16 gauge SWG CRCA sheet
with 6mm thick glazed glass door including necessary
locking arrangement suitable to accommodate 2 Nos 15
mtr long Hose pipe, 1 No branch pipe, mounted on wall OR
raised brick platform and duly painted with Post office red
externally and white internally with synthetic enamel paint
complete in all respect, for external hydrant as required.
Makes:Minimax/Safex/Newage/Winco/Padmini/
NewTech
352 52 Nos Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe EACH 6397.00
with 63mm dia Male and Female Gun metal / SS couplings
duly binded with GI wire, rivets etc conforming to IS 636
(Type -A) as required. Makes: Newage/ Winco/ Padmini /
Safex / Minimax/NewTech
a) Gun metal
353 26 Nos Supply and fixing 63mm dia Gun metal branch pipe with EACH 2500.00
20mm (Nominal internal diameter) size Gun metal / SS
nozzle conforming to IS 903, suitable for instantaneous
connection to interconnect hose pipe coupling as required.
Makes: Newage/ Winco/ Padmini / Safex /
Minimax/NewTech
a) Gun metal
354 26 Nos Supplying and fixing First -Aid Hose Reel with MS EACH 7612.00
construction spray painted in Post office Red, Conforming
to Is 884 with upto date amendments, complete with the
following as required.
a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose
Thermoplastic / Textile reinforced / Rubber braided /
Polypropylene Type - 2 as per IS:12585
Makes: Reliance/ Newage/
Safex/NewTech/Winco/Minimax
b) 20mm (Nominal internal) dia gun metal globe valve and
nozzle.
Makes:NEU-G/SANT / Safex.
c) Drum and brackets for fixing the equipments on wall.
d) Connections from riser with 25mm dia stop valve (gun
metal) & MS pipe.
358 10 Nos Supply and fixing air vessel made of 250 mm dia, 8 mm EACH 16247.00
thick MS sheet, 1200mm in height with air release valve on
top and flanged connection to riser, drain arrangement with
25mm dia Gun metal wheel valve, with required
accessories, pressure gauge and painting with synthetic
enamel paint of approved shade as required.
359 1000 Kg Supply, fabricating , installing structural steel supports for EACH Kg 72.00
fixing all sizes of MS pipes from ceiling / wall with MS
Channels, Angles, Flats, Rods, as required at site with
anchor fasteners, Clamps, threaded rods, nuts,
bolts,washers etc complete with painting.
ELECTRCAL PANEL:
365 1 Nos Designing, Supply, Transportation, Installation, Testing and EACH 287446.00
commissioning of system controller to control operation of
main electric fire pump, diesel pump, Pressurization pump,
Terrace pump in sequence as per specification consisting
of relays, timers. Sensors, annunciation window for fault
indication, complete as per specification
Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP
X3/
Siemens-3VL / Hager-h3/C&S -Winbreak2
Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure
/ Siemens
INCOMING :
400A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-400 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip
indicating lamps
Set of Copper Bus Bar 500A
OUTGOING :
( Note : All outgoing feeders for pumps should have digital
Ammeter with selector switches, and LED type ON, OFF,
trip indicating lamps)
MAIN FIRE PUMP
200 A, 50kA TPN MCCB, Ics=100% Icu, with fully
automatic Star/Delta starter suitable for 75 hp pump with
overload protection, current sensing type single phase
preventer complete with all accessories and internal wiring
required for automatic operation, selector switch for
local/remote, auto/manual/OFF operation.
JOCKEY PUMP
100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP
fully automatic Star/Delta starter with overload protection,
current sensing type single phase preventor complete with
all acceessories and internal wiring required for automatic
operation, selector switch for local/remote,
auto/manual/OFF operation.
DIESEL ENGINE CONTROL
366 Providing , laying, testing & Commissioning of following ' B
' classes MS pipes conforming to IS 3589 and 1239
including fittings like elbows, tees, flanges, tapers, nuts,
bolts, gaskets etc., complete.
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
U.G CABLES
367 Supply and transportation of following XLPE insulated,
1100V grade armoured alluminium cable as per
specification confirming to IS:7098 (Part - I)./1554-I
Make: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab /RR Kabel / RPG / Finolex / Finecab /
Paragon / V-Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
368 100 RM Earth work excavation of Trench in hard ground soil, laying ONE RM 259.00
of U.G cables of size up to 70 Sqmm on sand cusion
covering the cable with bricks and back filling of Trench
duly providing route indicator (as per general instruction
S.No. 14 of SSR) embedded in C.C including cost and
conveyance of materials and labour charges etc.,
complete.
369 500 RM Labour charges for run of U.G cable on wall / existing pipe ONE RM 44.00
with necessary fixing arrangments such as saddles,
clamps,wooden separators etc., (as directed by
departmental official) for the cables.
ALUMINIUM LUGS:
372 Supply and fixing of crimping type Aluminium lugs
confirming to IS specifications for following cables including
nuts and bolts with connections.
a 10 NO 50Sq.mm EACH 28.00
b 10 NO 35Sq.mm EACH 23.00
c 10 NO 25 Sq.mm EACH 17.00
d 100 NO 16 Sq.mm EACH 11.00
COPPER LUGS:
373 Supply and fixing of crimping type Copper lugs confirming
to IS specifications for following cables including nuts and
bolts with connections.
SPRINKLER SYSTEM:
375 Providing , laying, testing & Commissioning of following ' B
' classes MS pipes conforming to IS 3589 and 1239
including fittings like elbows, tees, flanges, tapers, nuts,
bolts, gaskets etc., complete.
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
377 10 Nos Providing and fixing Flow Switches in 150 mm dia MS pipe. EACH 7612.00
Makes : System Sensor / Switzer /Honeywell
379 50 Nos Supply and installation of response indicators for above EACH 170.00
false ceiling detectors.
380 4 Nos Supply and installation of intallegent analogue addressable EACH 4658.00
rate of rise cum fixed temparature heat detectors including
the cost of base plate. 75mm dia MS outlet box for fixing of
the detector base, mounting
accessories etc., complete as per specifications and as
required.
Makes: Notifier / Edwards /Bosch
382 4 NOS Supply and Installation of Intalligent analogue addressable EACH 4772.00
Control Modules including the cost of mounting accessories
complete as per pecifications
and as required.
Makes: Notifier / Edwards /Bosch
FIRE EXTINGUISHERS
387 25 Nos Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg EACH 10112.00
capacity confirming to IS 2878 made from ISI marked
steam less cylinder confirming to IS:7285 & CE certified
and fitted with ISI marked controlled valve confirming to
IS:3224, high pressure 1 Mtr discharge hose & horn
complete with initial gas charged with carrying handle with
wheels and wall mounting bracket. Squeeze lever
discharge, used un-used indicator, Aphoxy coated paint
(Red) with 93% gloss with 2 years warranty Including
transportation, all taxes and all labour charges etc
complete.
Makes: Cease Fire / Minimax
( SSR - 19-20, Item NO: 9.4.13 +Overheads&Contractors
Profit @13.615% )
388 25 Nos Supply and fixing of ISI mark (IS:15683) Mono ammonium EACH 7385.00
phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored
pressure type, pressure gauge, gross wt. 9.4 kg, empty
wt.3.4 kg, Discharge time minimum 13 sec, controllable
discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating -4 A, B
rating -34 B, can construction: Deep drawn and Co2 mig
welding, Valve construction: Forging & Machining, internal
coating of can: Epoxy powder coating, External coating of
Can:Epoxy polyster powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5
years warranty Including transportation, all taxes and all
labour charges etc complete.
Makes: Cease Fire / Minimax
( SSR - 19-20, Item NO: 9.4.7 +Overheads&Contractors
Profit @13.615% )
SIGNAGE BOARDS:
389 60 Nos Supply and fixing of Escape signage boards in Rigid Photo Each 1363.00
luminecent based glow in Dark rigid sheet with high
intensity luminous properties with specificaiton.
Makes: Cease Fire or its equivalent make Model-1ES01
FIRE DOORS
390 36 SQM Supply & Fixing of Powder Coated Fire Rated doors, ONE SQM 13359.00
frames & shutters made of Skin pass galvanized Iron sheet
conforming to Base Steel as per IS 513 “D” Quality,
Galvanized as per IS 277 with Hot Zinc Coating of 120
grams / Sq.Mtr with powder coating of thickness 60-65
Microns, frame with 1.2mm thick Skin pass Galvanized Iron
sheet formed to double rebate profile of ize 143 mm X 58
mm with maximum bending radius of 1.4 mm and filled with
in-fill Polyurethane foam, the Door Shutters are with 0.80
mm thick Skin pass Galvanized Iron Sheet formed to
provide a 46 mm thick fully flush, double skin door shell
with Lock Seam joints at stile edges, fitted with in-fill of
Honeycomb Kraft Paper and coated with polyester powders
of Pure polyester/ epoxy polyester or polyurethane powder
for powder coating of thickness 60 – 65 microns and are
coated with Zinc Phosphate Primer to receive any paint on
site or finished with Thermosetting Polyurethane paint of
Aliphatic Grade providing high levels of scratch resistance
and durability, the Shutter provided with 6 MM clear float
vision glass in Circular, Square or Rectangular shapes,
Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed
flush to the frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever Handles, Mortise Dead
Bolt, etc for 120 minutes Fire Rated door conforming to
IS:3614 (Part2) 1992
TERRACE FLOOR
391 Providing , laying, testing & Commissioning of following ' B
' classes MS pipes conforming to IS 3589 and 1239
including fittings like elbows, tees, flanges, tapers, nuts,
bolts, gaskets etc., complete.
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
EXTERNAL ELECTRIFICATION
VCB Panel
type floor mounted metal clad, 11 KV 800A VCB Panel with
394 1 NO 3 Nos. VCBs suitable for 50Hz 3-phase system, suitable for EACH 1528122.00
26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec
Internal Arc capacity. Switchgear Panel enclosure of sheet
steel preferably Aluzinc, dust tight, vermin proof, totally
enclosed cubicle floor mounting, free standing type with
single break, horizontally drawout type breaker with trip free
mechanism as per latest standard i.e. IS/IEC 62271-200 as
amended up to date and as per Technical specifications,
IP4X for VCB Panel enclosure. Switchgear Panel shall be
electrically & mechanically interlocked as per IEC 62271-1,
full voltage insulated copper Busbar with heat shrinkable
sleeving, complete with suitable metering & protection
devices, breaker featured with mechanical ON-OFF
indicator with hand trip device and all accessories such as
shunt trip coil, motorized & manually operated spring
charging mechanism, emergency trip push buttons,
auxiliary switch of 2NO + 2NC, interconnections, space
heaters, panel earthing etc. and equipped with following
switchgear and accessories including connection suitable
for 3x185 to 3x 400 sqmm XLPE 11kV cable (cable entry
from bottom) to be connected through heat shrinkable
jointing material etc as required. (Note - Cost of end
termination not included in this item.)
Makes:ABB/Schneider/Seimens/Kirloskar/Amara
HT CABLES
396 Supply and Transportation of XLPE insulated IS:7098/II/85
H.T.cable for working voltage 11 K.V Earthed with
Stranded Compacted Circular Aluminium Conductor
Screened with Extruded Semi-conducting compound,
XLPE Insulated Screened with extruded semi-conducting
compound in combination with Copper Tape, cores laid up,
inner sheath of Thermoplastic tape, galvanised flat steel
strip armoured and overall Extruded PVC Type ST- 2 Outer
Sheathed cable etc complete
Make: Torrent
/ Universal / Unicab / Havells / KEI /Polycab/Gloster/RR
Kabel/RPG
a 4 No Outdoor Termination Kit for 11KV XLPE (E) : 3C x 120 / Each 13719.00
150 / 185 sq.mm
b 6 No Indoor Termination Kit for 11KV XLPE (E) : 3C x 120 / Each 10140.00
150 / 185 sq.mm
IN COMING
800 A Electrical drawout type Micro processor type 4 pole
ACBs-3 Nois for 2 Nos for transformers and one as bus
coupler with electrical and mechanicl interlocking among
them.
Makes: Siemens-3WLETU45B / L&T-U Power
Omega(MTX3.5 EC) / Schneider -Master pact
NW 6.0P /Legrand-DMX3/C&S Winmaster-2)
Metering
0-800A Digital Ammeter -2NO
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
0-500V Digital Voltmeter -2 No.
Make: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/
Schneider /AE/ Socomec
R,Y,B indication Lamps LED type-6NOs
Makes: L&T / C&S / SALZAR / HPL .
Selector switches-4Nos
Makes: L&T / C&S / SALZAR / HPL .
32A fuse bases with 2A control fuses -6Nos L&T Make.
800A/5A CTS-6Nos.
Make: Kappa/L&T/Seimens/C&S/Schneidera
OUT GOINGs
630A TP MCCB, 50 KA - 3 Nos -
Makes: L&T- D shine / Schneider-NS NSX / Legrand -DP
X3/ Siemens-3VL / Hager-h3/ C&S -Winbreak2
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for
Panel shall be manufacture only from CPRI approval
Fabricators.
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for
Panel shall be manufacture only from CPRI approval
Fabricators.
800A Aluminium Bus Bar with colour code.(0.8A/Sqmm).
Radiology Panel
226 1 NOS Supply, installation, testing and commissioning of wall/floor EACH 141569.00
mounting type panel board with alluminium bus bars
fabricated with 16 Gauge CRCA Sheet comprising of TPN
bus bars of equal size in all phases and neutral equipped
with bus bar chambers and cable chambers.The bus bars
fault level shall be 50 KA and shall be as per the
requirement of local CEIG, fire regulations, CPRI norms
and other authorities etc. The painting of the complete
system shall be powder coated duly processing the panel
in 7 tank process. The panel shall be suitable for
accomdating the following switch gear including supply of
all components, hard wares etc including all necessary civil
works, adequate reinforcement, foundation bolts, suitable
G.I earth strip 50 x 6mm, door loop earthings, bus bars
should be colour sleeved with heat shrinkable sleeves for
phase and neutral duly supported at regular intervels by
SMC supports and all cables shall have proper cable entry,
danger board, feeder identification marks, rigid inter
connections, cadmium plated bolts and nuts and shall be
installed on wall/flooring and consisting of the following as
required and as per IS standards for Panel shall be
manufacture only from CPRI approval Fabricators.
227 2 Nos Supply and erection of 9 mtrs 175 X 85mm RS Joist pole Each 31105.00
with base plate of 1ft x 1 ft x 6 mm including excavation of
pit, coil earthing, hire charges of special T&P painting of
Pole CC 1:3:6 upto ground and 1:2:4 for Couping work,
including labour and transportation charges etc., complete.
228 30 RM Supply transportatioin the 4"x2" (100 x 50 mm) channel ONE RM 640.00
iron w including complete as required and all accessories.
229 1 SET Supply and fixing of 11 KV ,400 A 3 phase central post EACH 20451.00
rotating double break type AB switch(isolator) as per IS
9921) without earth blade,gang operated ,Hozizontal
type,operating mechanism with GI spring loaded reverse
loop type fixed contact,solid HD electrolytic copper tubular
moving contact with silver/Nicle plated at end points,9 Nos
post insulators of 12 Kv(IS 2594 and IS 5350) ,Hot Dip
galvenizing hardware,.
230 4 Set Supply and fixing of stayset with 7/8 SWG (10to 15m long) EACH 3094.00
guy insulator with concreting 1:3:6 incluidng excavation of
pit and back filling including cost and conveyance of all
materials and labolur charges etc., complete.
231 1 Job Labour Charges for fabrication of DP Structure and fixing EACH 7000.00
charges for AB Switch , HG fuse set LAS etc., including
cost hard ware materials, MS Clamps , Nuts and Boltes,
etc., complete
232 1 SET Supply and fixing of 100 A 11 KV Horn Gap fuse set as per EACH 6249.00
IS 9385 on existing DP structure with 6 nos 24 KV /22 KV
post Insulators( IS 5350, Hot dipped Hard ware, fuse wire
of required size etc., complete
233 1 SET Supply and fixing of distribution type lightning arrester 11 EACH 2840.00
KV 5 kA as per IS 3070 with mounting base on the existing
DP structure
234 100 RM Supply and run of one of "0" SWG or 8.25 mm dia hard ONERM 322.00
drawn bare copper wire including copper binding wire etc.,
complete as required including connections.
235 3 Nos. Supply and fixing of 11 KV pin Insulator (IS 731/1971 ) with EACH 227.00
minimum creepage distance of 300 mm on existing cross
arm including all accessories like Hot dip GI spindle and
nuts etc.,
236 9 Nos Supply and erecting porcelain disc type insulator suitable EACH 539.00
for 11KV line with suitable hardware on existing cross
arms.
237 1 Nos. Providing transformer plinth 2 x 2 x 1.5 mtr in size with EACH 8000.00
necessary excavation in ground at the bottom with 150mm
thick 1:2:4 cement concrete raft at the bottom and top and
225mm thick wall constructed in stone masonry and
remaking hallow portion shall be filled in by 1:5:10 cement
concrete duly plastered 20mm thick outsides including
watering etc., complete.
238 60 CUM Supply, transportation and spreading the (40mm) metal in ONE CUM 831.00
two layers in and around the double pole structure.
239 50 RM Supply and erecting 7/3.15 AAAC / Rabbit (55 Sq.mm) ONERM 44.00
conductor for Overhead line with stringing, binding and
suitable size of clamps for Jumpering etc., complete.
EARTHING
240 15 Nos. Providing independent earthling by excavating a trench to a Each 6701.00
depth of 2.5 M in all soils, as per size specified in the Data,
using 100mm dia Heavy Gauge C.I ( Cast iron ) pipe of
2.5 Mtrs length with Heavy gauge Flange with necessary
accessories including filling with Bentonite powder and all
labour charges etc., complete. ( for Main Panels and DG
sets )
241 10 NOs Providing independent earthing for Sophisticated Electronic EACH 12792.00
equipment with 600mm x 600mm x 3.15mm thick copper
plate rigidly fixed to 40mm dia G.I Pipe of 2.5mtr. length
filling with salt and charcoal giving earth connection from
electrode G.I strip of 40 mm x 6mm x 200mm length and
hume pipe with all accessories and labour charges
complete as per IS specification 3043 / 1987 (Part II).
LT CABLES:
242 Supply and transportation of following XLPE insulated,
1100V grade armoured alluminium cable as per
specification confirming to IS:7098 (Part - I)./1554-I
Make: Torent / Universal / Unicab / Havells / KEI /
Gloster / Polycab /RR Kabel / RPG / Finolex / Finecab /
Paragon / V-Guard / Fortune Art / Suncab / Delton
/ Payal / Gemscab/ Orbit/Avocab.
244 200 RM Earth work excavation of Trench in hard ground soil, laying One RM 214.00
of U.G cables on sand cusion covering the cable with bricks
and back filling of Trench duly providing route indicator (as
per general instruction S.No. 14 of SSR) embedded in C.C
including cost and conveyance of materials and labour
charges etc., complete.
245 400 RM Labour charges for run of U.G cable on wall / existing pipe One RM 44.00
with necessary fixing arrangments such as saddles,
clamps,wooden separators etc., (as directed by
departmental official) for eath connections for the cables.
248 2 Nos Supply and fixing of Gate fixing frame with size 2.1M x Nos 5084.00
1.25M width fabricated with MS Angle 40x40x6mm fencing
frame and the gate of size 1.8M x 1.25M with Angle
35x35x5mm four sides and 40x40x6mm 'T' Angle in middle
& M.S weld mesh 2"x2" including painting.
Safety Accessories.
249 1 NOS Supply and fixing printed instructions chart both in English EACH 511.00
and Telugu and duly framed with front glass for treatment
of person suffering from Electric shock.
250 1 pairs Supply of pair of rubber hand gloves suitable for working EACH 227.00
11/22 KV supply. .
251 3 NOS Supply of 6 MM thick 11KV, ISI, approved rubber mat of EACH 2150.00
thickness, required length and breadth.( 1000mm x
2000mm x 6mm )..
252 1 NOS Supply of standard 18"x12"x8" first aid box with all standard EACH 1221.00
contents.
253 4 NOS Supply of G.I sheet bucket of round bottom of 13 Ltrs. EACH 190.00
Capacity with printed letters and filled with sand and
arranged to existing stand or hook.
254 1 NOS Providing floor mounting stand for keeping 4Nos of bucket EACH 1363.00
1500mm length, 900mm height made out of 40x40x6mm
angle iron welded with 4 hooks and duly painted with one
coat of red lead and two coats of enamel paint.
255 2 NOS Supply and fixing of Danger Boards with Multi- EACH 114.00
Languages(MR)
256 2 NOS Supply and fixing of ABC stored pressure squeeze grip Each 5908.00
type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled
with ABC Mono Ammonium Phosphate base powder- 90
complete with discharge hose and wall mounting bracket,
2mm Mild Steel, EPDM Rubbers, Pressure Guage, which
work effectively on all class of fires (A, B, C
& Electrical fires) with 5 years warranty Including
transportation, all taxes and all labour charges etc
complete.
Makes : Safex / Kenex / Bharat / Reliance/NewTech
257 2 NOS Supply and fixing of ISI mark (IS:15683) Mono ammonium Each 4317.00
phosphate powder 90 (MAP) 4 Kg Fire extinguisher, stored
pressure type, pressure gauge, gross wt. 6.9 kg, empty
wt.2.9 kg, Discharge time minimum 13 sec, controllable
discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating -3 A, B
rating -34 B, can construction: Deep drawn and Co2 mig
welding, Valve construction: Forging & Machining, internal
coating of can: Epoxy powder coating, External coating of
Can:Epoxy polyster powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5
years warranty Including transportation, all taxes and all
labour charges etc complete.
Makes : Safex / Kenex / Bharat / Reliance/NewTech
STREET LIGHTS:
258 15 Nos Fabrication, Transportation and supply of hot-dip Ecah 13361.00
galvanized Octogonal Pole with BSEN - 10025 grade S 355
JO steel plate for shaft, IS 2062 for base plate with door
opening arrangement, including the supply of suitable
boards with bakelite sheet and MCB's as per IS
specification suitable to withstand the wind speed of 180
KMPH for 7.50 Mtrs height Pole having dimensions Bottom
130 mm,. Top 70mm with 3mm thick, base plate 220 x 220
x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with
template of
Make : Bajaj / Valmont /Transrail/Utkarsh/ Skipper/
Laasma/United
259 15 Nos Erection charges for 7.50 Mts long Octagonal pole on Ecah 4772.00
bridge kerb portion (R.C.C). with 4 Nos 8" Anchor bolts/
M20xsuitable "J" type bolts etc duly drilling holes to RCC
slab and with V.C.C. M.15 concrete for base concreting up
to a height of 8" with necessary Reinforcement work etc.
including cost and con veyance of all material and all
labour charges etc. complete as directed by the department
officers.
260 15 Nos Fabrication, Transportation and supply of 1.50 Mtr Length Ecah 1954.00
Single Arm Bracket made with MS galvanized 40mm /
50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/
Skipper
261 15 Nos Supply and laying of 1.5 Sq.mm 3 Core flexible copper EACH 954.00
cable from pole box to LED fitting with 1No 6-32A
MDS/L&T Hager make MCB and suitable connector
including all labour chargesetc complete.,
265 300 RM Earth work excavation of Trench in hard ground soil, laying One RM 259.00
of U.G cables upto 70 Sq,mm on sand cushion covering
the cable with bricks and back filling of Trench duly
providing route indicator embedded in C.C including cost
and conveyance of materials and labour charges etc.,
complete.
266 300 RM Labour charges for run of U.G cable up to 70 sq.mm on One RM 44.00
wall / existing pipe with necessary fixing arrangments such
as saddles, clamps,wooden separators etc., (as directed by
departmental official) for eath connections for the cables.
267 Supply and Laying NP2 class RCC hume pipe with bends,
Collars and other accessores of following siges including
trench excavation for laying the same with RCC incsing
around.
269 1 Job Preparation of drawings, Feeses and for CEIG Approval Each 35000.00
Motor pumpsets
SUBMERSIBLE PUMP SETS
273 8 Nos Fixing Charges for submersible motor pumpset etc., EACH 1500.00
including all labour chrages.
GRAND TOTAL:
Amount (Rs.)
1296000
1001000
37000
19000
1766700
10530
133140
25450
235935
72225
57900
216000
1080000
1313000
490000
303000
537600
814400
143175
514560
553740
23875
358860
49595
68115
95628
81000
67010
60020
63960
9500
55500
59400
70200
1694560
45360
187450
46648
12880
2400
3840
1530
2720
1840
1101050
242725
72675
75050
168000
302765
131625
44655
3755250
137500
113600
89800
75000
65300
106400
81400
63200
47800
41000
129500
44000
12276
8856
7500
6132
5680
4780
5970
5460
5100
3420
2280
1820
1240
1530
1350
1600
1360
1120
1150
850
64250
35220
67030
11900
29000
2610
7960
10440
85988
497050
59080
102250
405600
46468
57944
110000
44820
135202
66804
89100
94300
45218
18624
5438
6880
4235
53683
25500
45500
64800
130500
352500
79224
86700
181476
42140
10800
57000
37860
68700
9160
8000
499110
545470
1615720
59080
345900
921520
135375
48885
81000
98952
39200
61250
75500
45325
70000
39950
8670
150485
13211
3900
23860
15050
11200
937325
760740
28405
780000
1050000
1050000
13000
8000
22500
13000
21000
15000
40200
46800
45000
17250
7500
3800
5700
12600
436720
35310
5775
65098
29100
190500
97500
30000
24240
155548
206460
705000
525000
93312
375621
34560
7500
7500
19500
22500
1095135
29319
31985
33028
43690
44732
49020
200252
203960
40902
4089
3408
25560
65350
59650
107900
96600
85200
73800
17000
2050
119300
16362
185234
23900
2560
4400
40900
5638526
1680366
243363
178950
215644
85670
332644
65000
197912
102250
48300
28400
13066
27835
23290
35790
32950
35000
162470
72000
409014
681690
81803
63624
43401
287446
88620
61350
102225
96600
42600
31600
80000
25900
22000
36900
51000
1700
1140
1940
280
230
170
1100
2300
49400
67800
102240
147700
102250
136300
144900
107400
111400
84000
68200
56800
350000
75000
76120
215850
8500
18632
129600
19088
17040
13640
51126
108000
252800
184625
81780
480924
102250
136300
27835
153450
1528122
2408638
119300
54876
60840
243025
1757558
486570
233000
141569
62210
19200
20451
12376
7000
6249
2840
32200
681
4851
8000
49860
2200
100515
127920
275000
227200
179600
150000
51800
42800
17600
16200
46800
174100
10168
511
227
6450
1221
760
1363
228
11816
8634
200415
71580
29310
14310
80000
20500
100545
3680
5880
77700
13200
5280
41584
35000
44764
61806
57944
48854
3862
12954
12000
36400
56800
64427338
ABSTRACT
Srikakulam District
Sub Work: Providing Internal Electrification.,
S.NO NAME OF THE WORK Amount
Electrical Works:
1 Internal Wiring 20964413
2 Raising mains/Bus Duct system 1168392
2 EPABX - Telephone wiring 810104
3 LAN wiring 830400
4 Public Address System 233660
5 I) Split type Air-Conditiner:- 2660300
a) 1.5 TON - 10 Nos
b) 2.0 TON - 10 Nos
II) INVERTER Cassette type AC :
a) 3.5 TR 4 star - 10 Nos
GENERAL ABSTRACT
Sl.No. Description of Item Amount
1 Hospital Building
a Civil Works ` 292964580
b Internal Sanitary & WaterSupply ` 4880968
Internal,External Electrification,Fire Fighting, Lifts &
c ` 64427338
Modular OTs
Sub Total ` 362272886
2 130 KLD Sewerage Treatment Plant `
a Civil Works ` 4841025
b Mechanical ` 2620500
c Electrical ` 574782
d Pipeing ` 104500
e Instrumentation ` 195800
2 Earth work excavation for foundations (Mechanical 10909.00 CUM ONE CUM 115.00 1254535
Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and
3m to 6m depth including all operational,incidental,
labour charges such as shoring, sheeting, planking,
strutting etc., and overheads & contractors profit
complete for finished item of work excluding
dewatering charges etc., as per SS 20 B(APSS 308)
3 Earth work excavation for foundations (Mechanical 2621.00 CUM ONE CUM 128.00 335488
Means) for buildings in ordinary rock (not requiring
blasting) and depositing on bank for all lifts and with an
initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work
excluding dewatering charges etc., as per SS 20
B(APSS 308)
4 Earth work excavation for foundations for buildings in 575.00 CUM ONE CUM 1920.00 1104000
hard rock (blasting prohibited) and depositing on bank
for all lifts and with an initial lead of 10m and up to 3m
depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting
etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges
etc., as per SS 20 B(APSS 308)
6 Filling with useful available excavated earth (excluding 20897.00 CUM ONE CUM 31.00 647807
rock) with a lead of 50 m in trenches, sides of
foundations and basement with initial lead in layers not
exceeding 15cm thick, watering and ramming including
cost and conveyance of water to work site and all
operaitonal, incidental, labour charges, hire charges of
T&P etc., and overheads & contractors profit complete
for fnished item of work (APSS NO.309&310)
7 Conveyance of un-useful excavated earth to a 3690.00 CUM ONE CUM 75.00 276750
distance of 5 KM for disposal including hire charges of
T & P, labour charges etc., and overheads &
contractors profit complete for finished item of work.
a) Columns :
Cellar Floor : 145.00 CUM ONE CUM Err:509 Err:509
b) Lintels
Cellar Floor : 10.00 CUM ONE CUM Err:509 Err:509
e) Roof Beams :
un supported height up to 3.66 m
Cellar Floor : 98.00 CUM ONE CUM Err:509 Err:509
f) ROOF SLABS :
i) Roof Slabs 125mm thick :
Cellar Floor : 283.00 SQM ONE SQM Err:509 Err:509
a) Columns :
un supported height up to 4.27 m
Third Floor : 251.00 CUM ONE CUM Err:509 Err:509
b) Roof Beams
un supported height up to 4.27 m
Third Floor : 161.00 CUM ONE CUM Err:509 Err:509
a Treads
Cellar Floor : 43.00 SQM ONE SQM 5455.00 234565
41 Providing 110 mm Dia ISI marked PVC down water 1107.00 RM ONE RM 272.00 301104
take pipes with socket , 2.5mm thick 4.0 kg/sq.cm
pressure of ISI marked including cost of necessary
PVC Bends, shoes, iron / PVC clamps and all other
accessories and fixing in position including cost and
conveyance of all materials, operational & incidental
charges including all labour charges for fixing at site
etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 1328)
6 Disposal of earth
Qty as per excavation 14081.38 Cum
Ded for Filling with Available Earth -11969.18 Cum
2112.21 Cum
Say 2113.00 Cum
b) RAFT
Raft-1 1 19.270 25.620 0.750 370.27
Raft-1 1 41.600 45.120 0.750 1407.74
Raft-1 1 9.280 14.290 0.750 99.46
Ded Of Duct -2 5.270 21.100 0.750 -166.80
Ded Of Duct -1 25.810 3.540 0.750 -68.53
1642.15
Say 1643.00 Cum
c) Pedestals
C1 13 1.050 1.050 0.600 8.60
C2 20 1.050 1.050 0.600 13.23
C3 12 1.050 1.050 0.600 7.94
C4 5 1.050 1.050 0.600 3.31
C5 10 1.050 1.050 0.600 6.62
C6 6 1.050 1.050 0.600 3.97
C7 4 1.050 1.050 0.600 2.65
C8 2 1.050 1.050 0.600 1.32
C9 2 1.050 1.050 0.600 1.32
C10 2 1.050 1.050 0.600 1.32
C11 7 1.050 1.050 0.600 4.63
C12 19 1.050 1.050 0.600 12.57
C13 11 1.050 1.050 0.600 7.28
113 74.75
Say 75.00 Cum
c) Plinth Beams
Horizontal
Block-(-A)
T1-T7 1 13.810 0.300 0.400 1.66
Deduction of Columns -4 0.750 0.300 0.400 -0.36
T7-T10 2 7.700 0.300 0.600 2.77
T10-T16 2 13.810 0.300 0.400 3.31
Deduction of Columns -8 0.750 0.300 0.400 -0.72
Secondary Beam 1 6.850 0.300 0.400 0.82
Deduction of Columns -1 0.300 0.300 0.400 -0.04
DET-Hospital Building
APMSIDC-PALASA 864 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Secondary Beam 1 6.820 0.300 0.400 0.82
Deduction of Columns -1 0.300 0.300 0.400 -0.04
Q1-Q5 1 9.520 0.300 0.400 1.14
Deduction of Columns -2 0.750 0.300 0.400 -0.18
Q5-Q10 1 11.250 0.300 0.600 2.03
O1-O5 4 9.520 0.300 0.600 6.85
O5-O12 4 16.290 0.300 0.400 7.82
DET-Hospital Building
APMSIDC-PALASA 865 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Deduction of Columns -16 0.750 0.300 0.400 -1.44
O12-O16 4 9.520 0.300 0.600 6.85
Secondary Beam 2 4.300 0.300 0.400 1.03
G1-G16 2 35.320 0.300 0.400 8.48
Deduction of Columns -4 0.450 0.300 0.400 -0.22
Deduction of Columns -8 0.600 0.300 0.400 -0.58
E1-E3 1 4.300 0.300 0.400 0.52
Cantilever Beams 2 1.000 0.300 0.400 0.24
A6-A11 1 14.830 0.300 0.400 1.78
Deduction of Columns -4 0.600 0.300 0.400 -0.29
Ramp Block
R19-R21 5 5.100 0.230 0.300 1.76
Deduction of Columns -4 0.380 0.230 0.300 -0.10
K17-K19 4 5.860 0.230 0.300 1.62
Deduction of Columns -8 0.380 0.230 0.300 -0.21
I17-I23 1 16.820 0.230 0.300 1.16
Deduction of Columns -5 0.380 0.230 0.300 -0.13
H17-H18 2 5.080 0.230 0.300 0.70
Deduction of Columns -4 0.380 0.230 0.300 -0.10
H18-H22 1 10.360 0.230 0.400 0.95
Deduction of Columns -2 0.230 0.230 0.300 -0.03
G17-G19 2 7.480 0.230 0.300 1.03
Deduction of Columns -4 0.380 0.230 0.300 -0.10
G19-G21 4 4.800 0.230 0.350 1.55
F18-F19 2 2.180 0.230 0.300 0.30
Vertical
Block-(-A)
B1-E1 2 1.360 0.300 0.300 0.24
E1-G1 2 5.330 0.300 0.400 1.28
G1-H1 8 3.000 0.300 0.300 2.16
H1-O1 6 19.040 0.300 0.400 13.71
Deduction of Columns -24 0.600 0.230 0.400 -1.32
O1-Q1 4 3.000 0.300 0.300 1.08
Q1-T1 10 5.720 0.300 0.400 6.86
Deduction of Columns -1 0.600 0.300 0.400 -0.07
Secondary Beam 1 1.400 0.300 0.300 0.13
Secondary Beam 1 4.330 0.300 0.300 0.39
B5-G5 6 8.940 0.300 0.600 9.66
Deduction of Columns -10 0.750 0.300 0.600 -1.35
Deduction of Columns -2 0.600 0.300 0.600 -0.22
A6-B6 4 4.580 0.300 0.400 2.20
Ramp Block
D17-G17 2 5.860 0.230 0.400 1.08
G17-H17 4 3.000 0.230 0.300 0.83
H17-J17 2 5.750 0.230 0.400 1.06
J17-K17 2 2.560 0.230 0.300 0.35
D18-I18 2 12.920 0.230 0.300 1.78
Deduction of Columns -8 0.750 0.230 0.300 -0.41
I18-K18 2 6.050 0.230 0.400 1.11
C19-G19 2 8.640 0.230 0.300 1.19
Deduction of Columns -8 0.750 0.230 0.300 -0.41
G19-I19 2 5.860 0.230 0.400 1.08
I19-J19 3 2.890 0.230 0.300 0.60
J19-L19 3 4.930 0.230 0.400 1.36
L19-N19 3 3.490 0.230 0.350 0.84
N19-P19 3 3.850 0.230 0.350 0.93
P19-R19 2 2.760 0.230 0.300 0.38
DET-Hospital Building
APMSIDC-PALASA 866 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
97.17
Say 98.00 Cum
DET-Hospital Building
APMSIDC-PALASA 867 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
d) 230Thk Retaining Wall
Upto Cellar Floor Lvl 1 255.155 4.300 1097.17
1097.17
Say 1098.00 Sqm
8 VRCC
i Columns Upto GL
C1/RAFT-1 13 0.380 0.600 0.500 1.48
C2/RAFT-1 20 0.380 0.600 0.500 2.28
C3/RAFT-1 12 0.380 0.600 0.500 1.37
C4/RAFT-1 5 0.450 0.750 0.500 0.84
C5/RAFT-1 10 0.460 0.600 0.500 1.38
C6/RAFT-1 6 0.460 0.600 0.500 0.83
C7/RAFT-1 4 0.460 0.600 0.500 0.55
C8/F6 2 0.600 0.600 0.825 0.59
C9/F7 2 0.600 0.600 0.875 0.63
C10/RAFT-1 2 0.600 0.600 0.500 0.36
C11/RAFT-1 7 0.600 0.750 0.500 1.58
C12/RAFT-1 19 0.600 0.750 0.500 4.28
C13/RAFT-1 11 0.600 0.750 0.500 2.48
113 18.64
Say 19.00 Cum
iii
Columns Raft Top to Roof slab bottom
C1 13 0.380 0.600 3.475 10.30
C2 20 0.380 0.600 3.475 15.85
C3 12 0.380 0.600 3.475 9.51
C4 5 0.450 0.750 3.475 5.86
C5 10 0.460 0.600 3.475 9.59
C6 6 0.460 0.600 3.475 5.75
C7 4 0.460 0.600 3.475 3.84
C8 2 0.600 0.600 3.475 2.50
C9 2 0.600 0.600 3.475 2.50
C10 2 0.600 0.600 3.475 2.50
C11 7 0.600 0.750 3.475 10.95
C12 19 0.600 0.750 3.475 29.71
C13 11 0.600 0.750 3.475 17.20
113 126.06
Say 127.00 Cum
Total Qty of Columns
i Upto G.L 18.64
ii Above plinth 126.06
144.71
Say 145.00 Cum
9 Roof Beams
Horizontal
Block-(-A)
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
DET-Hospital Building
APMSIDC-PALASA 868 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Deduction of Columns -2 0.230 0.300 0.300 -0.04
DET-Hospital Building
APMSIDC-PALASA 869 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
Q13-Q16 1 7.120 0.300 0.300 0.64
O1-O5 4 9.520 0.450 0.575 9.85
O5-O12 4 16.290 0.300 0.275 5.38
Deduction of Columns -16 0.750 0.300 0.275 -0.99
O12-O16 4 9.520 0.450 0.575 9.85
G1-G16 2 35.320 0.300 0.300 6.36
Deduction of Columns -4 0.450 0.300 0.300 -0.16
Deduction of Columns -8 0.600 0.300 0.300 -0.43
E1-E3 1 4.300 0.300 0.400 0.52
Cantilever Beams 2 1.000 0.300 0.300 0.18
Ramp Block
R19-R21 5 5.100 0.230 0.355 2.08
Deduction of Columns -4 0.380 0.230 0.355 -0.12
K17-K19 4 5.860 0.230 0.275 1.48
Deduction of Columns -8 0.380 0.230 0.275 -0.19
I17-I23 1 16.820 0.230 0.275 1.06
Deduction of Columns -5 0.380 0.230 0.275 -0.12
H17-H18 2 5.080 0.230 0.300 0.70
Deduction of Columns -4 0.380 0.230 0.300 -0.10
H18-H22 1 10.360 0.230 0.450 1.07
Deduction of Columns -2 0.230 0.230 0.450 -0.05
G17-G19 2 7.480 0.230 0.300 1.03
Deduction of Columns -4 0.380 0.230 0.300 -0.10
G19-G21 3 4.800 0.230 0.380 1.26
F18-F19 2 2.180 0.230 0.300 0.30
Vertical
Block-(-A)
B1-E1 2 1.360 0.300 0.300 0.24
E1-G1 2 5.330 0.300 0.450 1.44
G1-H1 8 3.000 0.300 0.300 2.16
H1-O1 8 19.040 0.300 0.425 19.42
Deduction of Columns -32 0.600 0.300 0.425 -2.45
O1-Q1 2 3.000 0.230 0.300 0.41
O2-Q2 4 3.000 0.300 0.300 1.08
Q1-T1 6 5.720 0.230 0.450 3.55
Q5-T5 4 5.720 0.230 0.475 2.50
Deduction of Columns -1 0.600 0.230 0.475 -0.07
Secondary Beam 1 1.400 0.300 0.325 0.14
Secondary Beam 1 4.330 0.300 0.325 0.42
B5-G5 6 8.940 0.380 0.475 9.68
Deduction of Columns -10 0.750 0.380 0.475 -1.35
Deduction of Columns -2 0.600 0.380 0.475 -0.22
Ramp Block
D17-G17 2 5.860 0.230 0.450 1.21
G17-H17 4 3.000 0.230 0.300 0.83
H17-J17 2 5.750 0.230 0.450 1.19
J17-K17 2 2.560 0.230 0.300 0.35
D18-I18 2 12.920 0.230 0.300 1.78
Deduction of Columns -8 0.750 0.230 0.300 -0.41
I18-K18 2 6.050 0.230 0.380 1.06
C19-G19 2 8.640 0.230 0.300 1.19
DET-Hospital Building
APMSIDC-PALASA 870 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Deduction of Columns -8 0.750 0.230 0.300 -0.41
DET-Hospital Building
APMSIDC-PALASA 871 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
G19-I19 2 5.860 0.230 0.450 1.21
I19-J19 3 2.890 0.230 0.275 0.55
J19-L19 3 4.930 0.230 0.425 1.45
L19-N19 3 3.490 0.230 0.355 0.85
N19-P19 3 3.850 0.230 0.355 0.94
P19-R19 2 2.760 0.230 0.275 0.35
97.30
Say 98.00 Cum
10 Roof slab
i) Roof Slab 125mm thick
Ramp Block 1 432.775 432.78
Ded Of Staircase -1 5.100 5.700 -29.07
Ded Of Lift -2 2.400 3.000 -14.40
Deduction of Ramp -1 5.100 21.000 -107.10
282.21
Say 283.00 Sqm
11 Lintels
D2 1 1.960 0.225 0.175 0.08
D3 2 1.660 0.225 0.175 0.13
D5 11 1.360 0.225 0.175 0.59
D6 22 1.260 0.225 0.175 1.09
ALD1 2 2.460 0.225 0.175 0.19
FD1 3 2.460 0.225 0.175 0.29
FD2 2 1.960 0.225 0.175 0.15
W1 11 2.260 0.225 0.175 0.98
W2 12 1.960 0.225 0.175 0.93
W3 2 1.660 0.225 0.175 0.13
V1 12 2.260 0.225 0.175 1.07
V2 17 1.960 0.225 0.175 1.31
DET-Hospital Building
APMSIDC-PALASA 872 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
V5 38 1.060 0.225 0.175 1.59
JW 12 2.260 0.225 0.175 1.07
Lift 2 1.460 0.225 0.175 0.11
135 9.71
Say 10.00 Cum
12 Sunshades
W1 11 2.100 23.10
W2 12 1.800 21.60
W3 2 1.500 3.00
JW 12 2.100 25.20
V1 12 2.100 25.20
V2 17 1.800 30.60
V5 38 0.900 34.20
162.90
Say 163.00 RM
a Platforms
G toilets Wash Basins Platform 1 2.940 0.600 1.76
Store 1 2.895 0.600 1.74
Cold Store 1 2.895 0.600 1.74
L toilets Wash Basins Platform 1 2.940 0.600 1.76
Laboratory 1 2.500 0.600 1.50
8.50
Say 9.00 Sqm
b Lofts
Store 1 2.895 0.600 1.74
Cold Store 1 2.895 0.600 1.74
Laboratory 1 3.000 0.600 1.80
House Keeping 1 6.230 0.600 3.74
9.01
Say 10.00 Sqm
DET-Hospital Building
APMSIDC-PALASA 873 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Staircase 1 7.700 0.230 3.150 5.58
Cold Store To Service Corridor 1 13.060 0.230 3.150 9.46
Deduction of columns -3 0.750 0.230 3.150 -1.63
WC To PHC 2 6.060 0.230 3.150 8.78
WC 2 6.360 0.230 3.150 9.22
Deduction of columns -2 0.750 0.230 3.150 -1.09
Electrical Room 1 4.970 0.230 3.000 3.43
DET-Hospital Building
APMSIDC-PALASA 874 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Staircase 1 5.300 0.230 3.000 3.66
Cold Store 1 2.800 0.230 3.150 2.03
Ramp Wall 1 5.160 0.230 3.600 4.27
Staircase 2 4.300 0.230 3.150 6.23
Drivers Rest To Parking 1 35.320 0.230 3.150 25.59
Deduction of columns -6 0.600 0.230 3.150 -2.61
Ramp Block
Ramp Wall 1 5.100 0.230 3.175 3.72
Attendents Waiting Room 2 5.860 0.230 3.175 8.56
Deduction of columns -4 0.380 0.230 3.175 -1.11
Laboratory 2 5.860 0.230 3.175 8.56
Deduction of columns -4 0.380 0.230 3.175 -1.11
Corridor 1 5.940 0.230 3.175 4.34
Security 1 2.700 0.230 3.175 1.97
Corridor To Staircase Entrance 1 8.490 0.230 3.175 6.20
Deduction of columns -2 0.380 0.230 3.175 -0.55
Staircase 1 4.800 0.230 3.175 3.51
Staircase Entrance To Admin 1 5.860 0.230 3.175 4.28
Deduction of columns -1 0.380 0.230 3.175 -0.28
Lift 2 2.400 0.230 3.175 3.51
House Keeping To Lift 2 5.330 0.230 3.175 7.78
Deduction of columns -2 0.380 0.230 3.175 -0.55
Staircase 1 4.800 0.230 3.175 3.51
Vertical
Block-(-A)
Drivers Rest 1 1.360 0.230 3.150 0.99
Drivers Rest 1 1.360 0.230 3.150 0.99
Staircase 1 5.330 0.230 3.150 3.86
Staircase 1 5.330 0.230 3.150 3.86
Lobby 1 1.900 0.230 3.150 1.38
Lobby 1 1.900 0.230 3.150 1.38
Parking 1 19.530 0.230 3.150 14.15
Deduction of columns -3 0.750 0.230 3.150 -1.63
Parking 1 3.000 0.230 3.150 2.17
Toilets 2 5.720 0.230 3.150 8.29
PHC 2 1.500 0.230 3.150 2.17
Toilets 2 3.115 0.230 3.150 4.51
Electrical Room To Store 2 6.620 0.230 3.150 9.59
Deduction of columns -4 0.600 0.230 3.150 -1.74
Water 2 1.750 0.230 3.600 2.90
Parking 1 7.440 0.230 3.150 5.39
Corridor 1 3.000 0.230 3.150 2.17
Parking 1 12.690 0.230 3.150 9.19
Deduction of columns -3 0.600 0.230 3.150 -1.30
Parking 1 4.350 0.230 3.150 3.15
Deduction of columns -1 0.600 0.230 3.150 -0.43
Ramp Wall 1 16.200 0.230 3.600 13.41
Ramp Block
House Keeping 2 5.860 0.230 3.150 8.49
Lab To Attendents 2 9.510 0.230 3.150 13.78
Deduction of columns -2 0.600 0.230 3.150 -0.87
House Keeping 2 6.460 0.230 3.175 9.43
Lab 2 2.260 0.230 3.175 3.30
Staircase 2 8.640 0.230 3.175 12.62
Deduction of columns -8 0.600 0.230 3.175 -3.51
Ramp Walls 3 2.890 0.230 3.175 6.33
Ramp Walls 2 4.930 0.230 3.175 7.20
DET-Hospital Building
APMSIDC-PALASA 875 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Ramp Middle Wall 1 4.930 0.230 3.175 3.60
DET-Hospital Building
APMSIDC-PALASA 876 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Ramp Walls 2 8.530 0.230 3.175 12.46
Deduction of columns -4 0.600 0.230 3.175 -1.75
Ramp Walls 1 8.530 0.230 3.175 6.23
Deduction of columns -2 0.600 0.230 3.175 -0.88
Ramp Walls 2 2.630 0.230 3.175 3.84
Deduction
D2 -1 1.500 0.230 2.600 -0.90
D3 -2 1.200 0.230 2.600 -1.44
D5 -11 0.900 0.230 2.100 -4.78
W1 -11 1.800 0.230 1.800 -8.20
W2 -12 1.500 0.230 1.800 -7.45
W3 -2 1.200 0.230 1.800 -0.99
FD1 -2 2.000 0.230 2.100 -1.93
FD2 -2 1.500 0.230 2.100 -1.45
V1 -12 1.800 0.230 0.500 -2.48
V2 -17 1.500 0.230 0.500 -2.93
V5 -38 0.600 0.230 0.500 -2.62
JW -12 1.800 0.230 1.800 -8.94
Lift -2 1.000 0.230 2.100 -0.97
Lintels Deduction
D2 -1 1.960 0.230 0.175 -0.08
D3 -2 1.660 0.230 0.175 -0.13
D5 -11 1.360 0.230 0.175 -0.60
W1 -11 2.260 0.230 0.175 -1.00
W2 -12 1.960 0.230 0.175 -0.95
W3 -2 1.660 0.230 0.175 -0.13
FD1 -2 2.460 0.230 0.175 -0.20
FD2 -2 1.960 0.230 0.175 -0.16
V1 -12 2.260 0.230 0.175 -1.09
V2 -17 1.960 0.230 0.175 -1.34
V5 -38 1.060 0.230 0.175 -1.62
JW -12 2.260 0.230 0.175 -1.09
Lift -2 1.460 0.230 0.175 -0.12
244.21
Say 245.00 Cum
14 100 mm thick brick masonry walls
Horizontals
Block-(-A)
WC 2 2.630 3.450 18.15
PHC 1 3.280 3.450 11.32
Staff Toilet 1 1.200 3.450 4.14
Electrical Room 1 4.070 3.450 14.04
Corridor 2 2.400 3.450 16.56
PHC To WC 1 3.830 3.450 13.21
WC 1 3.940 3.450 13.59
Ramp Block
Attendents Attached Toilets 6 1.315 3.450 27.22
House Keeping Attached Toilets 2 1.915 3.450 13.21
Verticals
Block-(-A)
WC 12 1.500 3.450 62.10
Service Corridor 2 1.200 3.450 8.28
Staff Toilet 1 1.800 3.450 6.21
Store 1 3.045 3.450 10.51
Electrical Room 1 2.780 3.450 9.59
Cold Store 1 5.720 3.000 17.16
Ramp Block
DET-Hospital Building
APMSIDC-PALASA 877 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Attendents Attached Toilets 2 6.045 3.450 41.71
House Keeping Attached Toilets 2 1.200 3.450 8.28
DET-Hospital Building
APMSIDC-PALASA 878 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Deduction
D6 -22 0.800 2.100 -36.96
ALD1 -2 2.000 2.600 -10.40
FD1 -1 2.000 2.100 -4.20
Lintels Deduction
D6 -22 1.260 0.175 -4.85
ALD1 -2 2.460 0.175 -0.86
FD1 -1 2.460 0.175 -0.43
237.58
Say 238.00 sqm
15 PCC for Steps
Staircase 0.5 24 2.000 0.300 0.150 1.08
Staircase 0.5 24 2.000 0.300 0.150 1.08
Staircase 0.5 24 2.400 0.300 0.150 1.30
3.46
Say 4.00 cum
17 TMT STEEL
Columns Footings 11.35 90.000 Kgs/Cum 1021.64
Raft 1643.00 80.000 Kgs/Cum 131440.00
Pedestals 74.75 100.000 Kgs/Cum 7474.95
DET-Hospital Building
APMSIDC-PALASA 879 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Plinth beams 98.00 150.000 Kgs/Cum 14700.00
230mm thick Retaining wall 1097.17 22.000 Kgs/Sqm 24137.66
Columns upto 3.60 mts levael 145.00 200.000 Kgs/Cum 29000.00
Roof beams 98.00 200.000 Kgs/Cum 19600.00
125mm thick Roof slab 283.0 10.000 Kgs/Sqm 2830.00
150mm thick Roof slab 762.00 12.000 Kgs/Sqm 9144.00
175mm thick Roof slab 651.00 14.000 Kgs/Sqm 9114.00
175mm thick waist slab 180.00 14.000 Kgs/Sqm 2520.00
Lintels 10 80.000 Kgs/Cum 800.00
251782.25
Say 251.80 MT
18 Mild Steel
Sunshades 162.90 4.000 Kgs/RM 651.60
Lofts & Platforms 19 4.000 Kgs/Sqm 76.00
Shelves 3.00 4.000 Kgs/Sqm 12.00
RBM 238.0 0.500 Kgs/Sqm 119.00
858.60
Say 0.86 MT
19 External plastering
All round the Building Block-(-A) 1 155.450 3.600 559.62
All round the Building Ramp Block 1 106.113 3.600 382.01
Deductions
W1 -11 1.800 1.800 -35.64
W2 -12 1.500 1.800 -32.40
W3 -2 1.200 1.800 -4.32
JW -12 1.800 1.800 -38.88
V1 -12 1.800 0.500 -10.80
V2 -17 1.500 0.500 -12.75
V5 -38 0.600 0.500 -11.40
795.44
Say 796.00 Sqm
20 Ceiling plastering
Qty Same as Ceramic tile flooring 78.00
Qty Same as Vitrified flooring 369.00
Qty Same as Chequered flooring 102.00
Qty Same as Granite flooring 143.29
Qty Same as VDF flooring 1144.00
1836.29
Say 1837.00 Sqm
DET-Hospital Building
APMSIDC-PALASA 880 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Toilets Entrance 2 12.110 3.450 83.56
Toilets Lobby 1 3.530 3.450 12.18
Toilets Corridor 1 5.260 3.450 18.15
Toilets Corridor 1 7.660 3.450 26.43
WC 10 5.400 3.450 186.30
DET-Hospital Building
APMSIDC-PALASA 881 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
PHC Toilet 2 7.000 3.450 48.30
Staff Toilet 1 6.000 3.450 20.70
Laboratory & Security Toilet 2 5.400 3.450 37.26
Attendents Waiting Toilet 4 5.400 3.450 74.52
Attendents Waiting Toilet Lobby 2 2.400 3.450 16.56
House Keeping & Admin Toilet 2 6.000 3.450 41.40
Staircase 1 24.260 3.450 83.70
Staircase 1 24.100 3.450 83.15
Staircase 1 26.560 3.450 91.63
Parking 1 138.120 3.450 476.51
Entrance Corridor 1 21.080 3.450 72.73
Water Dumb 1 5.400 3.450 18.63
Duct 1 3.000 3.450 10.35
Deductions
D2 -1 1.500 2.600 -3.90
D3 -2 1.200 2.600 -6.24
D5 -11 0.900 2.100 -20.79
D6 -22 0.800 2.100 -36.96
ALD1 -2 2.000 2.600 -10.40
FD1 -3 2.000 2.100 -12.60
FD2 -2 1.500 2.100 -6.30
W1 -11 1.800 1.800 -35.64
W2 -12 1.500 1.800 -32.40
W3 -2 1.200 1.800 -4.32
V1 -2 1.800 0.500 -1.80
V2 -17 1.500 0.500 -12.75
V5 -38 0.600 0.500 -11.40
JW -12 1.800 1.800 -38.88
Ded for Dadooing with ceramic tiles for
Toilets -232.80
Ded for Dadooing in corridor -5.84
Cladding with Granite Slab -11.52
2155.96
Say 2156.00 Sqm
a 12 mm thick internal plastering
60% of above quantity 1293.57
Say 1294.00 Sqm
b 20 mm thick Internal plastering
40% of above quantity 862.38
Say 862.00 Sqm
22 Flooring
a) Ceramic Tile Flooring
Toilets Entrance 2 2.940 3.115 18.32
Toilets Lobby 1 1.200 4.730 5.68
Toilets Corridor 1 2.630 1.500 3.95
Toilets Corridor 1 3.830 1.500 5.75
WC 10 1.200 1.500 18.00
PHC Toilet 2 2.000 1.500 6.00
Staff Toilet 1 1.200 1.800 2.16
Laboratory & Security Toilet 2 1.200 1.500 3.60
Attendents Waiting Toilet 4 1.200 1.500 7.20
Attendents Waiting Toilet Lobby 2 1.200 1.200 2.88
House Keeping & Admin Toilet 2 1.200 1.800 4.32
77.84
Say 78.00 Sqm
DET-Hospital Building
APMSIDC-PALASA 882 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
b) Vitrified Tile Flooring
Electrical Room 1 3.995 3.115 12.44
Store 1 2.635 3.045 8.02
Lobby 1 1.130 1.315 1.49
Lobby 2 2.400 3.345 16.06
Lobby 2 3.340 2.930 19.57
Service Corridor 2 6.060 1.200 14.54
Ded Of Ducts -6 0.750 0.600 -2.70
Cold Store 1 3.950 6.160 24.33
Drivers Rest 1 4.300 2.400 10.32
Corridor 1 20.050 3.000 60.15
Infront Ramp 1 10.360 3.230 33.46
Laboratory & Security 2 3.000 3.000 18.00
Attendents Waiting 2 4.315 6.045 52.17
House Keeping & Admin 2 3.000 4.915 29.49
Lobby 2 1.085 1.315 2.85
Infront Lift 2 2.400 3.000 14.40
Under Ramp 1 21.000 2.550 53.55
368.15
Say 369.00 Sqm
d) Granite Slabs
Infront Staircase-1 1 2.400 6.280 15.07
Staircase Midlanding 1 2.000 4.430 8.86
Under Staircase 1 5.300 4.430 23.48
Infront Staircase-2 1 4.300 2.450 10.54
Staircase Midlanding 1 2.000 4.300 8.60
Under Staircase 1 4.300 5.300 22.79
Infront Staircase-3 1 5.100 2.480 12.65
Staircase Midlanding 1 5.100 2.400 12.24
Under Staircase 1 5.100 5.700 29.07
143.29
Say 144.00 Sqm
e) Chequered tiles
Ramp 2 2.400 18.000 86.40
Ramp Mid Landing 1 5.100 3.000 15.30
101.70
Say 102.00 Sqm
e) Intenrlocking Tiles
Entrance Ramp 1 5.000 15.965 79.83
79.83
Say 80.00 Sqm
f) VDF Flooring
Parking 1 35.320 33.740 1191.70
Ded Of Toilet -1 4.530 10.610 -48.06
1143.63
Say 1144.00 Sqm
23 Skirting
a) Skirting with Vitrified Tiles
Electrical Room 1 11.105 11.11
Store 1 8.315 8.32
Lobby 1 3.575 3.58
Lobby 2 8.145 16.29
DET-Hospital Building
APMSIDC-PALASA 883 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Lobby 2 9.610 19.22
Service Corridor 2 13.320 26.64
Cold Store 1 14.060 14.06
Drivers Rest 1 11.000 11.00
Corridor 1 43.100 43.10
Infront Ramp 1 23.950 23.95
Laboratory & Security 2 9.000 18.00
Attendents Waiting 2 14.675 29.35
House Keeping & Admin 2 10.915 21.83
Lobby 2 3.485 6.97
Infront Lift 2 7.800 15.60
Under Ramp 1 44.550 44.55
313.56
Say 314.00 Rmt
25 Dadooing in corridor
3.0 m wide corridor 1 9.690 1.500 14.54
Deductions
D5 -2 0.900 1.500 -2.70
FD1 -2 2.000 1.500 -6.00
5.84
Say 6.00 Sqm
DET-Hospital Building
APMSIDC-PALASA 884 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
Staircase-1&2 2 22 2.000 0.300 26.40
Staircase-3 1 22 2.400 0.300 15.84
42.24
Say 43.00 Sqm
ii Risers
Staircase-1&2 2 24 2.000 0.150 14.40
Staircase-3 1 24 2.400 0.150 8.64
23.04
Say 24.00 Sqm
26 High polished granite platforms
Qty same as Platforms 9.00
9.00
Say 9.00 Sqm
30 Wall putty
Same as internal plastering 2156.00
2156.00
Say 2156.00 Sqm
32
Emulsion paint for external plastering
Same as of external plastering @ 60% 477.60
477.60
Say 478.00 Sqm
33
Emulsion paint for external plastering
Same as of external plastering @ 40% 318.40
318.40
Say 319.00 Sqm
DET-Hospital Building
APMSIDC-PALASA 885 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
34 Doors
Wooden Doors
D2 (1.5X 2.60) 1 1.500 2.600 3.90
Say 3.90 Sqm
DET-Hospital Building
APMSIDC-PALASA 886 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
D6 (0.8 X 2.10) - Frame 22 5.000 110.00
Say 110.00 RM
35 Doors
ALD Doors
ALD1 (2.0X 2.60) 5 2.000 2.600 26.00
Say 26.00 Sqm
36 Windows
W1 11 1.800 1.800 35.64
W2 12 1.500 1.800 32.40
W3 2 1.200 1.800 4.32
Total Quantity 72.36 Sqm
40 Ventilators
V1 12 1.800 0.500 10.80
V2 17 1.500 0.500 12.75
V5 38 0.600 0.500 11.40
34.95 Sqm
41 Structural Glazing
staire case at Ramp 2 1.800 3.000 10.80
10.80
Say 11.00 Sqm
42 Structural Glazing with top hung
shutters
20% of above quantity 2.16
2.16
Say 3.00 Sqm
43 Railing
All round the staircase 1 7.350 0.900 6.62
DET-Hospital Building
APMSIDC-PALASA 887 OF1109
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
All round the staircase 1 7.350 0.900 6.62
All round the staircase 1 7.350 0.900 6.62
All round the ramp 1 36.000 0.900 32.40
52.25
Say 53.00 Sqm
44 Grip bar
Staircase 1 15.030 15.03
Staircase 1 14.900 14.90
Staircase 1 16.500 16.50
Ramp 1 47.100 47.10
PHC Toilet 2 6.000 12.00
Entrance Ramp 1 10.600 10.60
116.13
Say 117.00 Rmt
45 Cupboards
Store 1 2.000 2.100 4.20
Cold Store 2 2.000 2.100 8.40
House Keeping 1 2.500 2.100 5.25
17.85
Say 18.00 Sqm
46 Mastic pad
Roof beams
Horizontal 1 3.460 0.450 1.56
PB 1 3.460 0.300 1.04
2.60
Say 3.00 Sqm
48 Aluminium sheet
Roof beams
Horizontal 1 3.460 3.46
PB 1 3.460 3.46
6.92
Say 7.00 Rmt
DET-Hospital Building
APMSIDC-PALASA 888 OF1109
NAME OF THE WORK: CONSTRUCTION OF 200 BEDDED SUPER SPECIALITY HOSPITAL WITH KIDNEY
RESEARCH CENTRE & DIALYSIS UNIT AT PALASA VILLAGE IN SRIKAKULAM DISTRICT.
Detailed Estimate - Lower Ground Floor
S.NO DESCRIPTION NOS L(M) B(M) D(M) QUANTITY
1 Earth work excavation by
Machinary up to 3.0m
Lower Ground Floor Excavation 1 41.450 44.970 3.000 5592.02
5592.02
Say 5593.00 Cum
b) RAFT
Raft-2 1 41.300 44.820 0.750 1388.30
Ded Of Duct -2 5.270 21.100 0.750 -166.80
Ded Of Duct -1 25.810 3.540 0.750 -68.53
1152.98
Say 1153.00 Cum
c) Pedestals
C4 5 1.050 1.050 0.600 3.31
C5 8 1.050 1.050 0.600 5.29
C6 6 1.050 1.050 0.600 3.97
C7 4 1.050 1.050 0.600 2.65
C8 2 1.050 1.050 0.600 1.32
C9 2 1.050 1.050 0.600 1.32
C10 2 1.050 1.050 0.600 1.32
C11 7 1.050 1.050 0.600 4.63
C12 19 1.050 1.050 0.600 12.57
C13 11 1.050 1.050 0.600 7.28
66 43.66
Say 44.00 Cum
c) Plinth Beams
Horizontal
Block-(-B)
T24-T30 1 13.810 0.300 0.400 1.66
Deduction of Columns -4 0.750 0.300 0.400 -0.36
T30-T33 2 7.700 0.300 0.600 2.77
T33-T39 2 13.810 0.300 0.400 3.31
Deduction of Columns -8 0.750 0.300 0.400 -0.72
Secondary Beam 2 9.520 0.300 0.400 2.28
Deduction of Columns -4 0.230 0.300 0.400 -0.11
Q24-Q28 2 9.520 0.300 0.400 2.28
Deduction of Columns -4 0.750 0.300 0.400 -0.36
Q28-Q30 1 2.800 0.300 0.400 0.34
Q30-Q35 1 11.250 0.300 0.600 2.03
Add extra Quantity for level difference 1 290.000 0.300 0.400 34.80
Say 35.00 Cum
7 VRCC
i Columns Upto GL
C4/RAFT-1 5 0.450 0.750 0.500 0.84
C5/RAFT-1 8 0.460 0.600 0.500 1.10
C6/RAFT-1 6 0.460 0.600 0.500 0.83
C7/RAFT-1 4 0.460 0.600 0.500 0.55
C8/F6 2 0.600 0.600 0.825 0.59
C9/F7 2 0.600 0.600 0.875 0.63
C10/RAFT-1 2 0.600 0.600 0.500 0.36
C11/RAFT-1 7 0.600 0.750 0.500 1.58
C12/RAFT-1 19 0.600 0.750 0.500 4.28
C13/RAFT-1 11 0.600 0.750 0.500 2.48
Add extra Quantity for level difference 33 0.450 0.750 2.000 22.28
99 35.51
Say 36.00 Cum
8 Roof Beams
Horizontal
Block-A
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
Deduction of Columns -2 0.230 0.300 0.300 -0.04
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
9 Roof slab
i) Roof Slab 125mm thick
Ramp Block 1 432.775 432.78
Ded Of Staircase -1 5.100 5.700 -29.07
Ded Of Lift -2 2.400 3.000 -14.40
Deduction of Ramp -1 5.100 21.000 -107.10
282.21
Say 283.00 Sqm
10 Lintels
MD1 1 3.460 0.225 0.175 0.14
D2 19 1.960 0.225 0.175 1.47
D3 9 1.660 0.225 0.175 0.59
D5 28 1.360 0.225 0.175 1.50
D6 43 1.260 0.225 0.175 2.13
ALD1 5 2.460 0.225 0.175 0.48
FD1 8 2.460 0.225 0.175 0.77
FD2 2 1.960 0.225 0.175 0.15
W1 43 2.260 0.225 0.175 3.83
W2 23 1.960 0.225 0.175 1.78
W3 2 1.660 0.225 0.175 0.13
V1 16 2.260 0.225 0.175 1.42
V2 22 1.960 0.225 0.175 1.70
V5 68 1.060 0.225 0.175 2.84
JW 23 2.260 0.225 0.175 2.05
Lift 2 1.460 0.225 0.175 0.11
21.09
Say 22.00 Cum
11 Sunshades
W1 43 2.100 90.30
W2 23 1.800 41.40
W2 2 1.800 3.60
JW 23 2.100 48.30
V1 16 2.100 33.60
V2 22 1.800 39.60
V5 68 0.900 61.20
318.00
Say 318.00 RM
a Platforms
Block-A
b Lofts
Block-A
Store 1 3.045 0.600 1.83
Store 1 4.800 0.600 2.88
Clean Linen 1 4.800 0.600 2.88
Nurse Station 1 3.000 0.600 1.80
Console 1 3.385 0.600 2.03
Ramp Block
Laboratory 1 3.000 0.600 1.80
House Keeping 1 6.230 0.600 3.74
Block-(-B)
Store 2 3.000 0.600 3.60
Chemical Store 1 6.160 0.600 3.70
Drug Store 1 7.000 0.600 4.20
Medico Legal Store 1 7.000 0.600 4.20
Medical Store 1 4.800 0.600 2.88
Surgical Store 1 4.800 0.600 2.88
Celan Store 1 4.800 0.600 2.88
Office 1 4.800 0.600 2.88
Tailoring 1 4.800 0.600 2.88
47.05
Say 48.00 Sqm
16 TMT STEEL
17 Mild Steel
Sunshades 318.00 4.000 Kgs/Rm 1272.00
Lofts & Platforms 120 4.000 Kgs/Sqm 480.00
Shelves 40.00 4.000 Kgs/Sqm 160.00
Sillslab 1.549 4.000 Kgs/Sqm 6.20
RBM 1262.0 0.500 Kgs/Sqm 631.00
RCM facia 16.00 3.000 Kgs/Sqm 48.00
2597.20
Say 2.60 MT
18 External plastering
All round the Building Block-(A) 1 155.450 3.600 559.62
Duct Shorter Side 2 6.000 1.000 12.00
Duct Shorter Side 2 18.575 3.600 133.74
All round the Building Ramp Block 1 106.113 3.600 382.01
All round the Building Block-(-B) 1 155.450 3.600 559.62
Duct Shorter Side 2 6.000 1.000 12.00
Duct Shorter Side 2 18.575 3.600 133.74
Deductions
W1 -43 1.800 1.800 -139.32
W2 -23 1.500 1.800 -62.10
W3 -2 1.200 1.800 -4.32
JW -23 1.800 1.800 -74.52
V1 -16 1.800 0.500 -14.40
V2 -22 1.500 0.500 -16.50
V5 -68 0.600 0.500 -20.40
1461.17
Say 1462.00 Sqm
19 Ceiling plastering
Qty Same as Ceramic tile flooring 249.00
Qty Same as Vitrified flooring 1444.00
Qty Same as Chequered flooring 102.00
Qty Same as Granite flooring 985.85
2780.85
Say 2781.00 Sqm
21 Flooring
a) Ceramic Tile Flooring
Block-A
L Toilet 1 3.830 1.620 6.20
L Toilet Corridor 1 3.230 1.200 3.88
WC 4 1.200 1.500 7.20
G Toilet 1 3.995 1.500 5.99
G Toilet Lobby 1 1.360 1.620 2.20
WC 2 1.200 1.500 3.60
Staff Toilet 1 1.200 1.800 2.16
Ward Attached Toilets 2 1.500 1.800 5.40
d) Granite Slabs
Entrance Portico 1 1 5.320 2.000 10.64
Infront Staircase-1 2 1 2.400 6.280 30.14
Staircase Midlanding 2 1 2.000 4.430 17.72
Infront Staircase-2 2 1 4.300 2.450 21.07
Staircase Midlanding 2 1 2.000 4.300 17.20
Infront Staircase-3 1 1 5.100 2.480 12.65
Staircase Midlanding 1 1 5.100 2.400 12.24
Lobby 1 2.350 2.810 6.60
Entrance Foyer 1 20.900 8.710 182.04
Corridor 1 21.750 3.000 65.25
Corridor 1 2.400 28.430 68.23
Corridor 1 2.400 18.810 45.14
Corridor 1 30.900 3.000 92.70
Infront Lift 2 2.400 3.000 14.40
Corridor 1 23.390 3.000 70.17
Corridor Lobby 1 10.360 3.230 33.46
Corridor 1 14.400 3.000 43.20
Corridor Lobby 1 5.070 1.730 8.77
Corridor 1 4.070 3.000 12.21
Corridor 1 2.400 25.130 60.31
Corridor 1 2.400 18.810 45.14
Corridor 1 30.790 3.000 92.37
e) Chequered tiles
Ramp 2 2.400 18.000 86.40
Ramp Mid Landing 1 5.100 3.000 15.30
101.70
Say 102.00 Sqm
f) Interlocking Tiles
Entrance Ramp At Portico 2 5.000 2.000 20.00
Portico 1 14.250 6.240 88.92
108.92
Say 109.00 Sqm
22 Skirting
a) Skirting with Vitrified Tiles
Block-A
Service Corridor 2 21.420 42.84
Infront Toilets 1 8.920 8.92
1 14.120 14.12
1 4.880 4.88
Store 1 11.360 11.36
Electrical Room 1 14.220 14.22
AHU Room 1 14.170 14.17
Water & lobby 1 13.600 13.60
Ultra Sound 1 20.220 20.22
Console 1 14.910 14.91
ECG 1 11.420 11.42
Lobby 1 10.500 10.50
CT Scan 1 24.210 24.21
X Ray 2 24.210 48.42
X Ray Processing 1 15.600 15.60
Reporting 1 15.600 15.60
Waiting 1 21.610 21.61
Rec 1 16.360 16.36
Store 1 15.600 15.60
Clean Linen 1 15.600 15.60
Store 1 15.600 15.60
Duty Nurse 1 15.600 15.60
Nurse Station 1 13.200 13.20
Duty Doctor 1 15.600 15.60
Admin 1 15.600 15.60
Examination 1 26.000 26.00
Ward 1 38.460 38.46
Pharmacy 1 22.360 22.36
Police Out Post 1 15.460 15.46
Rest Room 1 10.770 10.77
Rec 1 20.920 20.92
Lobby 1 10.320 10.32
Ramp Block
Laboratory & Security 2 12.000 24.00
Attendents Waiting 2 20.720 41.44
House Keeping & Admin 2 15.830 31.66
Lobby 2 4.800 9.60
24 Dadooing in corridor
Block-A
Corridor 1 43.500 1.500 65.25
Entrance Corridor 1 61.800 1.500 92.70
Corridor 1 38.080 1.500 57.12
Corridor 1 56.860 1.500 85.29
Ramp Block
3.0 m wide corridor 1 13.160 1.500 19.74
3.0 m wide corridor 1 23.390 1.500 35.09
Block-(-B)
Corridor 1 37.420 1.500 56.13
Corridor 1 61.580 1.500 92.37
Corridor 1 38.080 1.500 57.12
Corridor 1 56.860 1.500 85.29
Deductions
ALD1 -2 2.000 1.500 -6.00
FD1 -6 2.000 1.500 -18.00
MD1 -1 3.000 1.500 -4.50
D2 -15 1.500 1.500 -33.75
D3 -3 1.200 1.500 -5.40
D5 -13 0.900 1.500 -17.55
D6 -2 0.800 1.500 -2.40
558.50
Say 559.00 Sqm
ii Risers
Staircase-1&2 4 28 2.000 0.150 33.60
Staircase-3 1 28 2.400 0.150 10.08
43.68
Say 44.00 Sqm
27 High polished granite platforms
Qty same as Platforms 72.00
72.00
Say 72.00 Sqm
30 Wall putty
Same as internal plastering 6083.00
6083.00
Say 6083.00 Sqm
36 Doors
ALD Doors
ALD1 (2.0X 2.60) 13 2.000 2.600 67.60
Say 67.60 Sqm
37 Windows
2 Track Sliding Windows
W1 40 1.800 1.800 129.60
W2 17 1.500 1.800 45.90
W3 3 1.200 1.800 6.48
Total Quantity 181.98 Sqm
38
MS Grill for Windows @ 15 Kg/Sqm
W1 44 1.800 1.800 142.56
W2 17 1.500 1.800 45.90
W3 3 1.200 1.800 6.48
Ventilators
V5 66 0.600 0.500 19.80
214.74
41 Ventilators
V5 66 0.600 0.500 19.80
Say 19.80 Sqm
42 Structural Glazing
staire case at Ramp 2 1.800 3.000 10.80
10.80
Say 11.00 Sqm
43 Railing
All round the staircase 2 1 7.350 0.900 13.23
All round the staircase 2 1 7.350 0.900 13.23
All round the staircase 1 1 7.350 0.900 6.62
All round the ramp 1 1 36.000 0.900 32.40
65.48
Say 66.00 Sqm
44 Grip bar
Staircase 2 1 15.030 30.06
Staircase 2 1 14.900 29.80
Staircase 1 1 16.500 16.50
Ramp 1 1 47.100 47.10
PHC Toilet 1 1 7.800 7.80
PHC Toilet 1 1 7.500 7.50
PHC Toilet 1 1 8.690 8.69
Entrance Ramp 1 2 9.000 18.00
165.45
Say 166.00 Rmt
45 Cupboards
Pharmacy Issue 1 2.000 2.100 4.20
Nurse Station 1 2.000 2.100 4.20
Store 3 2.500 2.100 15.75
Clean Linen Store 1 2.500 2.100 5.25
Rec 1 2.500 2.100 5.25
Lab 1 2.500 2.100 5.25
Store 1 2.500 2.100 5.25
Drug Store 2 2.500 2.100 10.50
Surgical Store 2 2.500 2.100 10.50
46 RCM Drop
Entrance Portico 1 33.730 0.450 15.18
15.18
Say 16.00 Sqm
47 False ceiling
Qty Same as Vitrified flooring 1 1444.00 1444.00
Qty Same as Granite flooring 1 985.85 985.85
2429.85
Say 2430.00 Sqm
48 Mastic pad
Roof beams
Horizontal 2 3.460 0.450 3.11
3.11
Say 4.00 Sqm
50 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
51 Impervious coat for terrace
Portico 1 14.830 9.980 148.00
148.00
Say 149.00 Sqm
2 Roof Beams
Horizontal
Block-A
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
Deduction of Columns -2 0.230 0.300 0.300 -0.04
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
Q13-Q16 1 7.120 0.300 0.300 0.64
O1-O5 4 9.520 0.450 0.575 9.85
3 Roof slab
iii) Roof Slab 175mm thick
H1-H5 x H1-O1 2 2 9.980 19.040 760.08
H31-H32 x H31-O31 1 1 6.460 19.040 123.00
B31-B32 x B31-G31 1 1 6.760 8.940 60.43
943.51
Say 944.00 Sqm
i) Roof Slab 150mm thick
Block-(A) 1 40.600 35.780 1452.67
Block-(B) 1 40.600 35.780 1452.67
Ded Of Staircase -2 5.300 4.430 -46.96
Ded Of Staircase -2 4.300 5.300 -45.58
Ded Of Duct -2 6.000 18.575 -222.90
Deduct Double Height Portion -1 15.830 8.480 -134.24
Portico Slab 1 14.250 9.750 138.94
Deduction of 175mm Thick Slab -943.51
1651.09
Say 1652.00 Sqm
ii) Roof Slab 125mm thick
c Racks
Injection room(male) 3 1 3.140 0.450 4.24
Injection room(female) 3 1 3.140 0.450 4.24
8.48
Say 9.00 Sqm
10 Sunshades
W1 68 2.100 142.80
W2 5 1.800 9.00
W3 1 1.500 1.50
153.30
Say 154.00 Rmt
13 Mild Steel
Sunshades 153.30 4.000 Kgs/RM 613.20
Platforms & Lofts 33.087 4.000 Kgs/Sqm 132.35
Shelves 9.000 4.000 Kgs/Sqm 36.00
Sillslab 1.899 4.000 Kgs/Sqm 7.60
RBM 1357.3 0.050 Kgs/Sqm 67.86
857.01
Say 0.86 MT
14 External plastering
All round the Building 1 411.000 3.600 1479.60
All round the Open Courtyard 2 49.150 2.230 219.21
Open court yard wall 2 49.150 3.600 353.88
Deductions
W1 -68 1.800 1.800 -220.32
W2 -5 1.500 1.800 -13.50
W3 -1 1.200 1.800 -2.16
V5 -54 0.600 0.500 -16.20
1800.51
Say 1801.00 Sqm
15 Ceiling plastering
Qty Same as Vitrified flooring 900.00
Qty Same as Ceramic flooring 312.00
Qty Same as Granite Slab Flooring 1367.00
17 Flooring
a) Vitrified flooring
BLOCK-A1
Receiption at Nephrology & Urology 2 4.915 3.000 29.49
Renal Lab 1 4.800 3.000 14.40
Stores at Toilets 2 4.085 3.000 24.51
Electrical Room 1 3.995 3.115 12.44
Class IV Room 1 3.995 3.115 12.44
Uro dynamic Lab 1 4.800 3.000 14.40
Deduct Toilet -1 1.315 1.615 -2.12
Uro flowmetry room 1 4.800 3.000 14.40
Urology -OP 1,2,3,4 4 4.800 3.000 57.60
Technician Room 1 4.800 3.000 14.40
Nephrology-OP 1,2,3,4 4 4.800 3.000 57.60
Procedure Room 2 4.800 3.000 28.80
Store at Dept.Seminar Room 1 4.300 2.400 10.32
Dept.Seminar Room 2 4.835 8.480 82.00
Attendants waiting rooms 2 4.315 6.045 52.17
Laboratory & Security 2 3.000 3.000 18.00
House keeping & Floor Administration 2 3.000 6.230 37.38
Dedct Toilet -2 1.315 1.915 -5.04
Server Room 1 4.565 5.965 27.23
Store at Dept.Seminar Room 1 4.565 2.400 10.96
Block-B
Reception & Registration 1 4.680 8.595 40.22
Pharmacy issue counter 1 4.680 8.595 40.22
Security 1 4.300 2.400 10.32
Sample collection 1 4.785 3.000 14.36
Injection Rooms Male & Female 2 3.140 3.000 18.84
Stores at Toilets 2 3.830 3.000 22.98
Class IV Room 1 3.950 3.000 11.85
Electrical Room 1 3.950 3.000 11.85
Stores 2 2.635 3.045 16.05
Dressing Male &Female 2 4.800 3.000 28.80
Plaster room 1 4.800 3.000 14.40
G.Surgery-OP 1,2,3,4 4 4.800 3.000 57.60
Minor OT 1 4.800 3.000 14.40
ECG Room 1 4.800 3.000 14.40
General Medicine-OP 1,2,3,4 4 4.800 3.000 57.60
Stress test 1 4.800 3.000 14.40
ii Risers
Staircase 4 24 2.000 0.150 28.80
Staircase 1 24 2.415 0.150 8.69
Entrance 1 6 5.315 0.150 4.78
42.28
Say 43.00 Sqm
f) Interlocking Tiles
Entrance Ramp At Portico 2 5.000 2.000 20.00
Portico 1 14.250 6.240 88.92
27 Wall putty
Same as internal plastering 6067.00
6067.00
Say 6067.00 Sqm
29
Emulsion paint for external plastering
Same external plastering @ 60% 1080.60
1080.60
Say 1081.00 Sqm
31 Doors
MD1 1 6.100 3.000 18.30
18.30
Say 18.30 Sqm
33 Ventilators
V5 66 0.600 0.500 19.80
19.80
Say 19.80 Sqm
34
MS Grill for Windows @ 15 Kg/Sqm
W1 68 1.800 1.800 220.32
W2 5 1.500 1.800 13.50
W3 1 1.200 1.800 2.16
staire case at Ramp 2 1.856 3.000 11.14
At Entrance 2 2.400 3.000 14.40
V5 54 0.600 0.500 16.20
277.72 Sqm
Say 278.00 Sqm
4170.00 Kgs
36 Structural Glazing
staire case at Ramp 2 1.856 3.000 11.14
At Entrance 2 2.400 3.000 14.40
At Double height 2 2.400 3.000 14.40
At Double height 1 5.165 3.000 15.50
55.43
Say 56.00 Sqm
37 Structural Glazing with top hung
shutters
20% of above quantity 11.09
11.09
Say 12.00 Sqm
38 Jali wall
40 Grip bar
Staircase 5 14.830 74.15
Ramp 1 47.100 47.10
121.25
Say 122.00 Rmt
38 RCM Drop
Entrance Portico 1 33.730 0.450 15.18
Duct 2 1 6.000 0.450 5.40
20.58
Say 21.00 Sqm
41 False ceiling
Qty Same as Vitrified flooring 899.68
899.68
Say 900.00 Sqm
42 Mastic pad
Roof beams
Horizontal 2 3.460 0.450 3.11
3.11
Say 4.00 Sqm
44 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
2 Roof Beams
Horizontal
Block-A
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
Deduction of Columns -2 0.230 0.300 0.300 -0.04
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
Q13-Q16 1 7.120 0.300 0.300 0.64
3 Roof slab
iii) Roof Slab 175mm thick
H1-H5 x H1-O1 2 2 9.980 19.040 760.08
H31-H32 x H31-O31 1 1 6.460 19.040 123.00
B31-B32 x B31-G31 1 1 6.760 8.940 60.43
943.51
Say 944.00 Sqm
i) Roof Slab 150mm thick
Block-(A) 1 40.600 35.780 1452.67
Block-(B) 1 40.600 35.780 1452.67
Ded Of Staircase -2 5.780 4.300 -49.71
Ded Of Staircase -2 5.170 4.300 -44.46
Ded Of Duct -2 6.000 18.440 -221.28
Ded Of Dumb Waiter -2 1.500 1.200 -3.60
Deduction of 175mm Thick Slab -943.51
1642.78
c Racks
Reception 1 2 2.000 0.450 1.80
Stores 2 1 2.500 0.450 2.25
Dialyzer Storage 1 1 2.500 0.450 1.13
Laboratory 1 1 2.000 0.450 0.90
Pay Rooms 1 9 2.000 0.450 8.10
Pantry 2 1 2.500 0.450 2.25
16.43
Say 17.00 Sqm
5 230mm thick brick masonary
Horizontal
Block A2
Toilet Block to Dirty Utility 2 13.810 0.225 3.150 19.58
Deduction of columns -8 0.750 0.225 3.000 -4.05
Staircase 2 7.700 0.225 3.000 10.40
Toilet Block to Store 2 13.810 0.225 3.150 19.58
Deduction of columns -8 0.750 0.225 3.000 -4.05
Passage Beside Toilet Block 2 6.400 0.225 3.450 9.94
9 Lintels
W1 33 2.260 0.225 0.175 2.94
W2 78 1.960 0.225 0.175 6.02
W3 10 1.660 0.225 0.175 0.65
W4 5 1.360 0.225 0.175 0.27
V5 76 1.060 0.225 0.175 3.17
JW 24 2.260 0.225 0.175 2.14
D3 7 1.660 0.225 0.175 0.46
D5 40 1.260 0.225 0.175 1.98
D6 60 1.060 0.115 0.175 1.28
FD-1 12 2.460 0.225 0.175 1.16
FD-2 2 1.960 0.225 0.175 0.15
Strucural Glazing
SG 2 2.260 0.225 0.175 0.18
ALD-1 8 2.460 0.115 0.175 0.40
20.80
Say 21.00 Cum
10 Sunshades
W1 33 2.100 69.30
W2 78 1.800 140.40
W3 10 1.500 15.00
W4 5 1.200 6.00
230.70
Say 231.00 Rmt
11 Sill slabs
W1 33 2.260 0.230 0.050 0.86
W2 78 1.960 0.230 0.050 1.76
W3 10 1.660 0.230 0.050 0.19
W4 5 1.360 0.230 0.050 0.08
V5 76 1.060 0.230 0.050 0.93
3.81
Say 3.90 cum
12 TMT STEEL
Columns upto 3.60 mts levael 213.92 200.000 Kgs/Cum 42784.06
Roof beams 160.69 200.000 Kgs/Cum 32137.52
125mm thick Roof slab 283.84 10.000 Kgs/Sqm 2838.37
150mm thick Roof slab 1642.8 12.000 Kgs/Sqm 19713.32
175mm thick Roof slab 943.5 14.000 Kgs/Sqm 13209.13
175mm thick waist slab 247.20 14.000 Kgs/Sqm 3460.80
Lintels 20.80 80.000 Kgs/Cum 1663.85
115807.04
Say 115.80 MT
13 Mild Steel
Sunshades 230.70 4.000 Kgs/RM 922.80
Platforms & Lofts 39.000 4.000 Kgs/Sqm 156.00
Shelves 16.425 4.000 Kgs/Sqm 65.70
Sillslab 3.811 4.000 Kgs/Sqm 15.25
14 External plastering
All round the Building 1 421.977 3.600 1519.12
Duct Shorter Side 4 6.000 1.000 24.00
Duct Shorter Side 4 18.575 3.600 267.48
Deductions
W1 -33 1.800 1.800 -106.92
W2 -78 1.500 1.800 -210.60
W3 -10 1.200 1.800 -21.60
w4 -5 0.900 1.800 -8.10
V5 -76 0.600 0.500 -22.80
1440.58
Say 1441.00 Sqm
15 Ceiling plastering
Qty Same as Vitrified flooring 2352.00
Qty Same as Ceramic flooring 180.00
Qty Same as Cheqqured Tiles
flooring 102.00
17 Flooring
a) Vitrified flooring
Block-A
Dialysis 2 18.575 14.430 536.07
Change Room 1 2.985 2.400 7.16
Duty Nurse Room 2 3.320 6.115 40.60
Dialyzer Storage 2 3.145 6.115 38.46
Chemical Mixing 1 3.260 6.115 19.93
Reception 1 4.680 3.115 14.58
Arogya Sree 1 4.680 3.000 14.04
RO Plant 1 9.000 6.115 55.04
RO Plant 1 4.450 2.365 10.52
AHU 2 4.085 3.000 24.51
Class IV 1 3.995 3.115 12.44
Electrical 1 3.995 3.115 12.44
Store/pantry 1 2.695 3.045 8.21
3.0 m wide corridor 1 30.905 3.000 92.72
infront of Reception 3.0 m wide
corridor 1 26.110 2.480 64.75
infront of Staircase 1 4.300 3.780 16.25
3.0 m wide corridor near AHU 1 27.200 3.000 81.60
Near Dumb 1 3.640 1.730 6.30
infront of Staircase 1 6.270 2.400 15.05
infront of PHC 2 6.270 2.400 30.10
infront of PHC 2 2.930 0.940 5.51
infront of Utility 2 1.315 1.130 2.97
Ramp Block
Laboratory & Security 2 3.000 3.000 18.00
Attendents Waiting 2 4.315 6.045 52.17
House Keeping & Admin 2 3.000 4.915 29.49
Lobby 2 1.085 1.315 2.85
Infront Lift 2 2.400 3.000 14.40
Corridor 1 23.390 3.000 70.17
Corridor Lobby 1 10.360 3.230 33.46
Block-B
Service Corridor 2 8.050 1.200 19.32
Store 2 2.635 3.045 16.05
Electrical Room 2 3.995 3.115 24.89
Lobby 2 2.540 1.130 5.74
Lobby 2 1.230 3.230 7.95
ii Risers
Staircase-1&2 4 28 2.000 0.150 33.60
Staircase-3 1 28 2.400 0.150 10.08
43.68
Say 44.00 Sqm
24 Wall putty
Same as internal plastering 5852.00
5852.00
Say 5852.00 Sqm
27
Texture Paint for Exterrnal Walls
Same as of external plastering @
40% 576.40
576.40
Say 577.00 Sqm
28 Doors
D2 2 1.500 2.600 7.80
7.80
Say 7.80 Sqm
ALD
ALD1 20 2.000 2.600 104.00
104.00
Say 104.00 Sqm
30 Windows withmesh
W2 62 1.500 1.800 167.40
31 Ventilators
V5 74 0.600 0.500 22.20
22.20
Say 22.20 Sqm
32 Jali wall
Jali wall 24 1.800 1.800 77.76
77.76
Say 78.00 Sqm
35 Railing
Staircase
All round the staircase 2 1 7.350 0.900 13.23
All round the staircase 2 1 7.350 0.900 13.23
All round the staircase 1 1 7.350 0.900 6.62
All round the ramp 1 1 36.000 0.900 32.40
65.48
Say 66.00 Sqm
36 Strucural Glazing
SG 4 1.800 2.100 15.12
15.12
Say 16.00 Sqm
38 cupboards
Reception 1 1 2.500 2.100 5.25
Dialyzer Store 1 1 2.500 2.100 5.25
Store 1 1 2.000 2.100 4.20
Pay Rooms 1 9 2.000 2.100 37.80
52.50
Say 53.00 Sqm
36 Grip bar
37 RCM Drop
Duct 2 1 6.000 0.450 5.40
5.40
Say 6.00 Sqm
38 False ceiling
Qty Same as Vitrified flooring 2351.35
2351.35
Say 2352.00 Sqm
55 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
3 Roof slab
i) Roof Slab 125mm thick
Ramp Block (as per CAD) 1 432.775 432.78
Ded Of Staircase -1 5.100 5.700 -29.07
Ded Of Lift -2 2.400 3.000 -14.40
Deduction of Ramp -1 5.100 21.000 -107.10
282.21
Say 283.00 Sqm
10 Sunshades
W1 35 2.100 73.50
W2 4 1.800 7.20
W3 14 1.500 21.00
101.70
Say 102.00 Rmt
11 TMT STEEL
Columns upto 3.60 mts levael 250.97 200.000 Kgs/Cum 50193.22
Roof beams 160.69 200.000 Kgs/Cum 32137.52
125mm thick Roof slab 283.00 10.000 Kgs/Sqm 2830.00
150mm thick Roof slab 1647.00 12.000 Kgs/Sqm 19764.00
175mm thick Roof slab 943.51 14.000 Kgs/Sqm 13209.13
175mm thick waist slab 225.90 14.000 Kgs/Sqm 3162.60
12 Mild Steel
Sunshades 101.70 4.000 Kgs/RM 406.80
Sillslab 1.170 4.000 Kgs/Sqm 4.68
Platforms & Lofts 29.000 4.000 Kgs/Sqm 116.00
Shelves 71.000 4.000 Kgs/Sqm 284.00
RBM 1725.3 0.500 Kgs/Sqm 862.66
1674.14
Say 1.67 MT
13 External plastering
All round the Building 1 415.736 4.200 1746.09
Duuct at A4 1 32.000 4.200 134.40
Duuct at A4 1 24.230 4.200 101.77
Duuct at B3 1 49.150 4.200 206.43
Ramp offset walls 2 18.000 4.200 151.20
Deductions
W1 -32 1.800 1.800 -103.68
W2 -14 1.500 1.800 -37.80
W3 -10 1.200 1.800 -21.60
V5 -58 0.600 0.500 -17.40
2159.41
Say 2160.00 Sqm
14 Ceiling plastering
Qty Same as Vitrified flooring 2403.00
Qty Same as Ceramic flooring 100.00
Qty Same as Chqqured tiles flooring 104.00
Qty Same as Granite Slabs flooring 43.00
Deduct
Pre operative Ward -1 8.920 8.590 -76.62
Post Operative Ward -1 14.430 8.590 -123.95
ICU -1 11.200 12.800 -143.36
Pay Rooms -1 11.200 12.800 -143.36
2162.70
Say 2163.00 Sqm
16 Flooring
a) Vitrified flooring
BLOCK - A4
Store Room 1 4.240 4.240 17.98
Doctor Room 1 4.240 4.240 17.98
Anesthetia Room 1 4.240 4.240 17.98
Pre operative Ward 1 8.915 8.595 76.62
Deduction of toilet -1 2.510 1.800 -4.52
Change Room 4 2.400 2.065 19.82
Duty nurse 1 4.835 3.000 14.51
Deduction of toilet -1 1.200 1.500 -1.80
Officer Incharge 1 4.565 3.000 13.70
Deduction of toilet -1 1.200 1.500 -1.80
O.T.Records Room 1 3.435 2.735 9.39
O.T.Reception 1 5.965 5.595 33.37
A.H.U 1 6.885 9.390 64.65
Theatre Pack Preparation 1 4.800 6.115 29.35
ii Risers
Staircase 5 28 2.000 0.150 42.00
42.00
Say 42.00 Sqm
b) Epoxy coving
BLOCK - A4
Operation Theatre 3 26.000 78.00
Sterilization 1 18.230 18.23
96.23
Say 97.00 RM
23 Wall putty
Same as internal plastering 6989.00
Pre operative Ward 1 8.920 8.590 76.62
Post Operative Ward 1 14.430 8.590 123.95
ICU 1 11.200 12.800 143.36
Pay Rooms 1 11.200 12.800 143.36
7476.30
Say 7477.00 Sqm
25
Emulsion paint for external plastering
Same external plastering @ 60% 1296.00
27 Cinder Filling
Toilet Blocks 4 7.085 4.730 0.300 40.21
40.21
Say 41.00 cum
30 Ventilators
V5 58 0.600 0.500 17.40
17.40
Say 17.40 Sqm
1 RCM Drop
Duct 2 1 6.000 0.450 5.40
5.40
Say 6.00 Sqm
33 Painting to iron Work
Quantity Same as MS Grill 172.00
Say 172.00 Sqm
34 Railing
Staircase
Staircase 5 7.000 0.900 31.50
Duct 2 1 6.000 0.900 10.80
42.30
Say 43.00 Sqm
b cupboards
Change Room 1 4 2.400 2.100 20.16
OT records Room 1 1 3.780 2.100 7.94
OT pharmacy Store 1 2 4.800 2.100 20.16
Store 1 2 2.890 2.100 12.14
Class IV Room 1 2 4.070 2.100 17.09
Dirty Utility 1 2 2.890 2.100 12.14
89.63
Say 90.00 Sqm
35 Grip bar
36 False ceiling
Pre operative Ward 1 8.920 8.590 76.62
Post Operative Ward 1 14.430 8.590 123.95
ICU 1 11.200 12.800 143.36
Pay Rooms 1 11.200 12.800 143.36
487.30
Say 488.00 Sqm
37 Structural glazing
Pre Operative Ward 1 2.400 3.000 7.20
Change Room 1 2.400 3.000 7.20
Post OP I.C.U WARD 2 2.400 3.000 14.40
2 5.020 3.000 30.12
Staircase 2 1.800 3.000 10.80
69.72
Say 70.00 SQM
39 Mastic pad
Roof beams
Horizontal 2 3.460 0.450 3.11
3.11
Say 4.00 Sqm
41 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
2 Roof Beams
Horizontal
Block-A
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
Deduction of Columns -2 0.230 0.300 0.300 -0.04
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
Q13-Q16 1 7.120 0.300 0.300 0.64
O1-O5 4 9.520 0.450 0.575 9.85
O5-O12 2 16.290 0.300 0.275 2.69
3 Roof slab
i) Roof Slab 125mm thick
Ramp Block 1 432.775 432.78
Ded Of Staircase -1 5.100 5.700 -29.07
Ded Of Lift -2 2.400 3.000 -14.40
Deduction of Ramp -1 5.100 21.000 -107.10
282.21
Say 283.00 Sqm
d sill slabs
W1 75 2.260 0.230 0.050 8.48
W2 26 1.960 0.230 0.050 2.55
11.02
Say 12.00 cum
9 Lintels
D2 3 1.960 0.225 0.175 0.23
D3 5 1.660 0.225 0.175 0.33
D5 12 1.360 0.225 0.175 0.64
ALD1 1 2.460 0.225 0.175 0.10
FD1 2 2.460 0.225 0.175 0.19
FD2 2 1.960 0.225 0.175 0.15
W1 75 2.260 0.225 0.175 6.67
W2 26 1.960 0.225 0.175 2.01
V5 60 1.060 0.225 0.175 2.50
JW 60 2.260 0.225 0.175 5.34
Lift 2 1.460 0.225 0.175 0.11
D2 13 1.500 0.115 0.175 0.39
D3 5 1.200 0.115 0.175 0.12
D5 12 0.900 0.115 0.175 0.22
D6 36 0.800 0.115 0.175 0.58
ALD1 6 2.000 0.115 0.175 0.24
FD1 8 2.000 0.115 0.175 0.32
20.16
Say 21.00 Cum
10 Sunshades
W1 75 2.260 169.50
W2 26 1.960 50.96
220.46
Say 221.00 Rmt
11 Sill slabs
W1 75 2.260 0.230 0.050 1.95
W2 26 1.960 0.230 0.050 0.59
V5 60 1.060 0.230 0.050 0.73
3.27
Say 3.30 cum
13 Mild Steel
Sunshades 220.46 4.000 Kgs/RM 881.84
Platforms & Lofts 280.560 4.000 Kgs/Sqm 1122.24
Shelves 108.000 4.000 Kgs/Sqm 432.00
Sillslab 3.267 4.000 Kgs/Sqm 13.07
RBM 1160.5 0.500 Kgs/Sqm 580.23
3029.37
Say 3.03 MT
14 External plastering
All round the Building 1 415.736 3.600 1496.65
Duct at A4 1 49.150 3.600 176.94
Duct at B3 1 49.150 3.600 176.94
Ramp offset walls 2 18.000 3.600 129.60
Deductions
W1 75 1.800 1.800 243.00
W2 26 1.500 1.800 70.20
V5 60 0.600 0.500 18.00
2311.33
Say 2312.00 Sqm
15 Ceiling plastering
Qty Same as Waist slab 226.00
Qty Same as Ceramic flooring 129.13
16
Internal plastering 12 mm thick
BLOCK - A4
Seminar Hal 1 30.330 3.475 105.40
Lecture Hall 1 50.050 3.475 173.92
Stores 1 13.270 3.475 46.11
Pantry 1 13.270 3.475 46.11
Meeting Hall 1 26.000 3.475 90.35
PA Room 1 11.940 3.475 41.49
Ante Room 1 18.370 3.475 63.84
Superintendent Chamber 1 26.000 3.475 90.35
Cabins1-6 6 10.690 3.475 222.89
RMO Room 1 15.600 3.475 54.21
Pantry 1 15.600 3.475 54.21
Head Nurse Room 1 15.600 3.475 54.21
AHU Room 2 14.170 3.475 98.48
17 Flooring
a) Vitrified flooring
BLOCK - A4
Seminar Hal 1 6.570 8.595 56.47
Lecture Hall 1 16.430 8.595 141.22
Stores 1 3.145 3.490 10.98
Pantry 1 3.145 3.490 10.98
Meeting Hall 1 6.885 6.115 42.10
PA Room 1 3.470 2.500 8.68
Ante Room 1 3.300 5.885 19.42
Superintendent Chamber 1 6.885 6.115 42.10
Cabins1-6 6 2.345 3.000 42.21
RMO Room 1 4.800 3.000 14.40
Pantry 1 4.800 3.000 14.40
Head Nurse Room 1 4.800 3.000 14.40
AHU Room 2 4.085 3.000 24.51
Electrical Room 1 3.995 3.115 12.44
Store Rooms 2 2.635 3.045 16.05
Before Staircase 1 2.400 6.390 15.34
Class IV Room 1 3.995 3.115 12.44
ii Risers
Staircase 5 24 2.000 0.150 36.00
36.00
24 Wall putty
Same as internal plastering 4894.00
Qty Same as Vitrified flooring 2462.55
7356.55
Say 7357.00 Sqm
28 Doors
D2 15 1.500 2.600 58.50
58.50
Say 58.50 Sqm
30 Ventilators
V5 61 0.600 0.500 18.30
18.30
Say 18.30 Sqm
31
MS Grill for Windows @ 15 Kg/Sqm
W1 75 1.800 1.800 243.00
W2 35 1.500 1.800 94.50
V5 61 0.600 0.500 18.30
355.80 Sqm
Say 356.00 Sqm
5340.00 Kgs
32 RCC Jally Windows
JW 22 1.800 1.800 71.28
71.28
Say 72.00 Sqm
34 Railing
Staircase
Staircase 5 2 3.500 0.900 31.50
Duct 2 1 6.000 0.900 10.80
42.30
Say 43.00 Sqm
35 RCM Drop
Duct 2 1 6.000 0.450 5.40
5.40
Say 6.00 Sqm
b cupboards
Pay Room 1 18 1.200 2.100 45.36
Dirty Utility 1 2 2.890 2.100 12.14
57.50
Say 58.00 Sqm
35 Grip bar
Staircase 5 14.830 74.15
Ramp 1 47.100 47.10
121.25
Say 122.00 Rmt
36 False ceiling
Qty Same as Vitrified flooring 2462.55
2462.55
Say 2463.00 Sqm
37 Structural glazing
4 2.400 3.600 34.56
2 5.020 3.600 36.14
Staircase 2 1.800 3.000 10.80
40 Cinder Filling
Toilet Blocks 6 7.085 4.730 0.300 60.32
60.32
Say 61.00 cum
42 Mastic pad
Roof beams
Horizontal 2 3.460 0.450 3.11
3.11
Say 4.00 Sqm
44 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
2 Roof Beams
Staircase Head Room
Staircase(h) 5 2 4.690 0.230 0.380 4.10
Deduction of Columns 5 -4 0.300 0.230 0.380 -0.52
Staircase(v) 5 2 5.346 0.230 0.380 4.67
Deduction of Columns 5 -4 0.450 0.230 0.380 -0.79
Water Tank Bottom
Water Tank Bottom 4 2 7.350 0.230 0.425 5.75
Deduction of Columns 4 -6 0.600 0.230 0.425 -1.41
Water Tank Bottom 4 2 6.620 0.230 0.425 5.18
Deduction of Columns 4 -2 0.300 0.230 0.425 -0.23
16.74
Say 17.00 Cum
3 Roof slab
i) Roof Slab 125mm thick
Staircase Head Room
Staircase Head Room 5 7.700 4.690 180.57
180.57
Say 181.00 Sqm
5 Sunshades
W2 5 1.800 9.00
9.00
Say 9.00 Rmt
9 Dummy columns
Block-A & Ramp Block
C1 13 0.380 0.600 0.900 2.67
C2 14 0.380 0.600 0.900 2.87
C3 4 0.380 0.600 0.900 0.82
C4 1 0.450 0.750 0.900 0.30
C8 2 0.600 0.600 0.900 0.65
C9 2 0.600 0.600 0.900 0.65
C10 2 0.600 0.600 0.900 0.65
C11 1 0.600 0.750 0.900 0.41
C12 11 0.600 0.750 0.900 4.46
C13 10 0.600 0.750 0.900 4.05
11 Mild Steel
RBM 458.0 0.500 Kgs/Sqm 229.00
229.00
Say 0.23 MT
12 External plastering
All round the Building 5 25.400 3.600 457.20
Parapet wall (All round)
All round the Building 1 410.581 1.915 786.26
All round the Open Courtyard 2 49.150 1.915 188.24
Deductions
W2 -5 1.500 1.800 -13.50
1418.21
Say 1419.00 Sqm
13 Ceiling plastering
Staircase 5 7.000 5.000 175.00
Water tank Bottom 4 6.975 6.745 188.19
363.19
Say 364.00 Sqm
21 Windows
W2 5 1.500 1.800 13.50
13.50 Sqm
2 Gully traps 60
Say 60 Nos
3 Insppection Chambers 60
Say 60 Nos
4 Manholes
3' - 0' Depth 20
Say 20 Nos
6 Indian IWC
Cellar Floor 6 6
Lower G.Floor 9 9
Upper G.Floor 12 12
First Floor 10 10
Second Floor 0 0
Third Floor 11 11
Say 48 Nos
7 European EWC
Cellar Floor 13 13
Lower G.Floor 27 27
Upper G.Floor 25 25
First Floor 24 24
Second Floor 36 36
Say 125 Nos
7a European EWC
Third Floor 20 20
Say 20 Nos
8a Wash Basin
Third Floor 22 22
Say 22 Nos
9 Soap dish
Cellar Floor 12 12
Lower G.Floor 16 16
Upper G.Floor 42 42
First Floor 12 12
Second Floor 30 30
Say 112 Nos
9a Soap dish
Third Floor 22 22
Say 22 Nos
10 Mirrors
Cellar Floor 8 8
Lower G.Floor 14 14
Upper G.Floor 8 8
First Floor 8 8
Second Floor 24 24
Say 62 Nos
10a Mirrors
Third Floor 6 6
Say 6 Nos
11 Towel rods
Cellar Floor 8 8
Lower G.Floor 14 14
Upper G.Floor 8 8
First Floor 8 8
Second Floor 24 24
Say 62 Nos
11a Towel rods
Third Floor 6 6
Say 6 Nos
12 Surgical Sinks
Cellar Floor 0 0
Lower G.Floor 2 2
Upper G.Floor 2 2
First Floor 10 10
Second Floor 1 1
Third Floor 28 28
Say 43 Nos
13 Urinals
Cellar Floor 4 4
Lower G.Floor 10 10
Upper G.Floor 8 8
First Floor 4 4
Second Floor 0 0
Third Floor 8 8
Say 34 Nos
14 Marble Partitions
Cellar Floor 3 3
Lower G.Floor 9 9
Upper G.Floor 7 7
First Floor 3 3
Second Floor 0 0
Third Floor 7 7
Say 29 Nos
15 Porcelain Channels
Cellar Floor 4 4
Lower G.Floor 10 10
Upper G.Floor 8 8
First Floor 4 4
Second Floor 0 0
Third Floor 8 8
Say 34 Nos
13 NP bib taps
a) Long Body taps
Cellar Floor 10 10
Lower G.Floor 30 30
Upper G.Floor 12 12
First Floor 22 22
Second Floor 40 40
Say 114 Nos
13a Long Body taps
Third Floor 14 14
Say 14 Nos
14 Health faucet
Cellar Floor 13 13
Lower G.Floor 27 27
Upper G.Floor 25 25
First Floor 24 24
Second Floor 36 36
Say 125 Nos
Sink
Cellar Floor 0 0.8 0
Lower G.Floor 2 0.8 2
Upper G.Floor 2 0.8 2
First Floor 10 0.8 8
Second Floor 2 0.8 2
Third Floor 18 0.8 14
Wash Basin
Cellar Floor 14 0.8 11
Lower G.Floor 30 0.8 24
Upper G.Floor 45 0.8 36
First Floor 31 0.8 25
Second Floor 38 0.8 30
Third Floor 22 0.8 18
416.90 Rmt
Say 417 Rmt
Internal Connections
Cellar Floor 45 45
Lower G.Floor 115 115
Upper G.Floor 125 125
First Floor 165 165
Second Floor 110 110
Third Floor 135 135
1515.80
Say 1516.00 Rmt
Internal Connections
Cellar Floor 35 35
Lower G.Floor 60 60
Upper G.Floor 65 65
First Floor 50 50
Second Floor 40 40
Third Floor 35 35
958.20
Say 959.00 Rmt
17 CPVC Pipes
Terrace Ring Main
DOMESTIC & DRINKING WATER
a) 100.00 mm OD 325.00 Rmt
b) 54.00 mm OD 135.00 Rmt
21 Towel rings
Cellar Floor 8 8
Lower G.Floor 14 14
Upper G.Floor 8 8
Second Floor 32 32
Second Floor 24 24
Third Floor 6 6
Say 92 Nos
22 Short body
Cellar Floor 6 6
Lower G.Floor 9 9
Upper G.Floor 12 12
First Floor 10 10
Second Floor 0 0
Third Floor 8 8
Say 45 Nos
NAME OF THE WORK: CONSTRUCTION OF 200 BEDDED SUPER SPECIALITY HOSPITAL WITH KIDNEY
RESEARCH CENTRE & DIALYSIS UNIT AT PALASA VILLAGE IN SRIKAKULAM DISTRICT.
1 Earth work excavation for foundations (Mechanical Means) for 649.00 ONE CUM 101.00
buildings in ordinary soils and depositing on bank for all lifts
and with an initial lead of 10m and up to 3m depth including
all operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
2 Earth work excavation for foundations (Mechanical Means) for 151.00 ONE CUM 115.00
buildings in ordinary soils and depositing on bank for all lifts
and with an initial lead of 10m and 3m to 6m depth including
all operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding
dewatering charges etc., as per SS 20 B(APSS 308)
2 Filling with useful available excavated earth (excluding 372.00 ONE CUM 31.00
rock) with a lead of 50 m in trenches, sides of foundations and
basement with initial lead in layers not exceeding 15cm thick,
watering and ramming including cost and conveyance of water
to work site and all operaitonal, incidental, labour charges,
hire charges of T&P etc., and overheads & contractors profit
complete for fnished item of work (APSS NO.309&310)
3 Plain Cement Concrete (1:4:8) (cement: fine aggregate: 73.00 ONE CUM 3774.00
Coarse aggregate) for foundations and under flooring bed
using coarse aggregate 40mm size hard , machine
crushed granite from approved quarry including cost and
conveyance of all materials like cement, sand, coarse
aggregate, water etc. to site, including sales & other taxes on
all materials and including all charges for machine mixing,
laying concrete in foundations and under flooring bed,
ramming in 15 cm layers finishing top surface to the required
level curing etc., and overheads & contractors profit complete
for finished item of work. (APSS No. 402)
4 Supply and placing of the Design Mix Concrete M 30 grade
corresponding to IS 456 with minimum cement content of 400
kgs per 1 cum of concrete using WEIGH BATCHER / MIXER
with 20mm size graded machine crushed hard granite metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1
to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site and sales & other taxes
on all materials , centering using Steel scaffolding pipes , jack
props , wallers , Foot plates , brackets , steel centering plates
etc., including all operational, incidental and labour charges
such as weigh batching, machine mixing, lifting of concrete
manually, laying concrete, vibrating, curing etc., and
overheads & contractors profit complete but excluding cost of
steel and its fabrication charges for finished item of work
(APSS No. 402)
.
a) Columns upto an un-supported height of 3.66m 1.40 ONE CUM Err:509
a) Sump Roof beams upto 3.66 mts level 4.50 ONE CUM Err:509
c) Sump Slabs 150mm thick upto an un-supported height of 261.00 ONE SQM Err:509
3.66m
7 Providing Thermo Mechanically Treated (TMT) (Fe 500 19.72 ONE MT 58063.00
grade as per IS 1786-1979)(Tata, SAIL, VSP, JSW & Shyam
Steel ) of different diameters for RCC works , including labour
charges for straightening, cutting, bending to required sizes
and shapes, placing in position with cover blocks of approved
materials and size and tying and lap-splicing with binding wire
of 18 SWG, forming grills for reinforcement work as per
approved designs and drawings, including cost and
conveyance of steel bars, including all wastages such as
overlaps, couplings, chairs, spacer bars including cost and
conveyance of binding wire, cover blocks and all incidental,
operational, labour charges such as cutting, bending, placing
in position, tying including sales and other taxes on all
materials etc. ,and overheads & contractors profit complete for
finished item of work.( APSS No.126)
8 Brick masonry for panel walls in superstructure with CM (1:8) 16.00 ONE CUM 6270.00
prop: (Cement : Sand) using common burnt clay bricks of
class as per Table- I of IS:1077-1992, Non- Modular or
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand,
bricks, water etc., to site, labour charges, like mixing cement
mortar, scaffolding charges, constructing masonry, lift
charges, curing, etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 501 & 504)..
9 Plastering 12mm thick in two coats using screened sand
with base coat of 8mm thick in CM (1:6) and top coat of
4mm thick in CM (1:4) with dubara sponge finishing
including cost and conveyance of all materials like cement,
sand, water etc., to site, including sales & other taxes on all
materials, and all operational, incidental charges on materials
and including cost of all labour charges for mixing mortar,
finishing, scaffolding, lift charges, curing, including cutting
grooves as directed by Engineer - in - charge etc., and
overheads & contractors profit complete for finished item of
work. (SS 901,903 & 904)
14 Plastering 12mm thick single coat in CM(1:5) using screened 41.00 ONE SQM 323.00
sand including cost and conveyance of all materials like
cement, sand, water etc., to site and all operational, incidental
charges on materials and including cost of all labour charges
for mixing mortar, finishing, curing as directed by Engineer-in-
charge etc., and overheads & contractors profit complete for
finished item of work.(SS 901,903 & 904)
15 Ornamental ceiling plastering 12mm thick single coat in CM 60.00 ONE SQM 336.00
(1:5) using screened sand including cost and conveyance of
all materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
12 Providing impervious coat to exposed RCC roof slab surfaces 711.00 ONE SQM 356.00
of sump , sump side wall,sump bottom slab,in side of septic
tank , in sunken slabs etc. to required slopes with CM (1:3)
prop. using screened sand 12mm thick mixed with integral
cement water proofing liquid confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by
Engineer-in-charge at 200ml per one bag of cement, laid over
roof slab when it is green, finished smooth with a floating coat
of neat cement and thread lining at regular intervals of
45cmx45cm where ever necessary including cost and
conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, operational, incidental, and
labour charges for mixing mortar, laying, lift charges,
rendering smooth and thread lining, curing including rounding
off junctions of wall and slab etc., and overheads &
contractors profit complete for finished item of work. (APSS
No. 901 & 903).
13 Providing impervious coat to exposed RCC roof slab surfaces 253.00 ONE SQM 455.00
to required slopes with CM (1:3) prop. using screened sand
20mm thick (average) mixed with integral cement water
proofing liquid confirming to IS: 2645-2003 manufactured by
reputed manufacturers as approved by Engineer-in-charge at
200ml per one bag of cement, laid over roof slab when it is
green, finished smooth with a floating coat of neat cement and
thread lining at regular intervals of 45cmx45cm including cost
and conveyance of all materials like cement, sand, water
proofing compound, water etc., to site, operational, incidental,
and labour charges for mixing mortar, laying, lift charges,
rendering smooth and thread lining, curing including rounding
off junctions of wall and slab etc., and overheads &
contractors profit complete for finished item of work. (APSS
No. 901 & 903).
14 Supply & fixing of Rolling shutter made of 80 x 1.25 mm 4.60 ONE SQM 3633.00
machine rolled CRCA laths, interlocked together through their
entire length and jointed together at the ends by end-locks,
mounted on specially designed pipe shaft of 50mm dia
nominal bore MS B class pipe with brackets, plates, guide
channels, stoppers, bottom locking plates and arrangements
for inside & outside locking with push-pull operations including
cost of hood cover and springs complete, painted with one
coat of approved steel primer, locks, ball bearings, all
accessories etc., overheads & contractors profit complete for
finished item of work as per special spn: 1108
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm 2.00 ONE SQM 4879.00
including cost of ISI marked Aluminium fixtures of 3 Nos. butt
hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm
long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top ,
2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and
1 No. Rubber / Nylon door stop bushes including fixing the
fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing
the shutter to the frame etc., including overheads &
contractors profit complete for finished item of work as per
APSS 1001 & 1002 (The vertical frame of door shall be
embedded in flooring for a depth of not less than 10 mm)
(1000mm x 2100mm)
17 Providing and fixing factory made uPVC white colour sliding
glazed window comprising of uPVC multi-chambered frame
with in-built roller track and sash extruded profiles duly
reinforced with 1.60 ± 0.2 mm thick galvanized mild steel
section made from roll forming process of required length
(shape & size according to uPVC profile), appropriate
dimension of uPVC extruded glazing beads and uPVC
extruded interlocks, EPDM gasket, wool pile, zinc alloy (white
powder coated) touch locks with hook, zinc alloy body with
single nylon rollers (weight bearing capacity to be 40 kg), G.I
fasteners 100 x 8 mm size for fixing frame to finished wall and
necessary stainless steel screws etc. Profile of frame & sash
shall be mitred cut and fusion
Two track two panels sliding window made of frame 67 x 50 1.44 ONE SQM 6640.00
mm & sash 46 x 62 mm both having wall thickness of 2.3 ±
0.2 mm and single glazing bead / double glazing bead of
appropriate dimension .
18 White washing two coats with white cement to ceiling to give 60.00 ONE SQM 40.00
an even shade after thouroughly brushing the surface to
remove all dirt and remains of loose powdered materials
including cost of all materials , labour charges and incidental
such as scaffolding , lift charges etc., and overheads &
contractors profit complete for finished item of work in all
floors.
19 Supply & application of one coat water based cement primer 86.00 ONE SQM 188.00
of interior grade I and two coats of synthetic polymer luxury
plastic emulsion paint of superior grade having VOC (Volatile
Organic Compound) content less than 50 grams/litre for
internal walls including cost and conveyance of all materials to
site, incidental, operational and all labour charges etc., and
overheads & contractors profit complete for finished item of
work in all floors.
20 Supply & application of one coat water based cement primer 98.00 ONE SQM 248.00
of exterior grade II and two coats of synthetic polymer luxury
plastic emulsion paint of superior grade having VOC (Volatile
Organic Compound) content less than 50 grams/litre for
exterior walls including cost and conveyance of all materials to
site, incidental, operational and all labour charges etc., and
overheads & contractors profit complete for finished item of
work in all floors.
21 Painting two coats with synthetic enamel paint Grade-II VOC 16.00 ONE SQM 169.00
(Volatile Organic Compound) content less than 50 grams/litre
over primer coat of red oxide to new iron work including cost
and conveyance of all materials to site, incidental, operational
and all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors. (SS No. 1201,
1212 & 1207).
22 Supplying and fixing of stainless steel (grade 304) hand railing 7.10 ONE SQM 3219.00
as per approved drawing with top rail of 50mm dia pipe and
2mm thick medium class and vertical posts of 25mm dia and
1.6mm thick medium class 1 No for each step fixed with base
plate of 75mm dia using bonding agent and anchor fastner
and welding, drilling of 25mm dia holes with pneumatic
compressor for fixing railing, buffing, polishing all members of
the railing thouroughly , lacquer finishing to present
seamless finish including cost and conveyance of all
materials, electrodes, welding charges, cost of all
consumables, labour charges , overheads & contractors profit
etc., complete for finished item of work.
Amount
(Rs.)
65549
17365
11532
275502
`
0
Err:509
Err:509
Err:509
Err:509
Err:509
Err:509
Err:509
Err:509
1145002
100320
36894
43708
13243
20160
253116.00
115115
16712
9758
9562
2400
16168
24304
2704
22855
Err:509
0
DETAILED ESTIMATE OF 4.0 LAKHS LITRES RCC SUMP WITH PUMP ROOM
b Haunch concrete
Sump 0.50 1 50.00 0.30 0.300 2.25
Pump Room area 0.50 1 32.00 0.30 0.300 1.44
Steps for staircase 0.50 23 1.00 0.30 0.165 0.57
4.259
SAY 4.300 CUM
c 500 mm Thick Side walls
Sump long walls 2 22.500 0.500 3.275 73.69
Sump short walls 3 10.00 0.500 3.275 49.13
122.813
SAY 123.000 CUM
11 External plastering
Pump room internal 1 36.000 2.925 105.30
Deductions
R/S -1 2.300 2.020 -4.65
D -1 1.000 2.020 -2.02
W -1 1.200 1.200 -1.44
97.19
SAY 98.000 Sqm
12 Basement plastering
Sump alround 1 67.000 0.600 40.20
40.20
SAY 41.000 Sqm
2 Providing, Laying, Spreading and compacting graded 0.00 CUM ONE CUM 1177.00 0.00
HBG/HBG crushed stone aggregate to Wet Mix
macadem specification including cost of all materials
and including premixing the material with water at
OMC in Mechanical mix plant carriage of mixed
material by tipper to site , laying in uniform layers
with paver in base courses on well prepared surface
and compacting with Vibratory roller to acheive the
desired density etc., as directed by the Engineer-in-
Charge and as per MoRT&H specification.406 (5th
revision) for finished item of work. (Payment based
on levels for finished item of work)
3 Construction of Granular sub-base by providing 434.00 CUM ONE CUM 1007.00 437038.000
HBG material confirming to Grading - III of MORT
& H Table 400-2 including cost and conveyance of
all material to woek site and spreading in uniform
layers with motor grader or by approved means, on
prepared surface mixing by mix place method with
Rotavator/ approved means, at OMC and
compacting with vibratory roller to achieve the
desired density etc., complete for finished item of
work as per MoRT& H specification 401 (4th revision)
and as directed by the Engineer- in - charge
(Payment will be made based on levels for finished
item of work)
Rate
Unit Amount
Sl. No. Description of Work Quantity In
(in words) (Rs.)
Figures
4 Plain Cement Concrete (1:4:8) (cement: fine 164.00 CUM One CUM 3774.00 618936.00
aggregate: Coarse aggregate) for foundations
using coarse aggregate 40mm size hard , machine
crushed granite from approved quarry using
concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site
including all charges for machine mixing and hire
charges of concrete mixer, laying concrete in
foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
for DLC
5 Plain Cement Concrete (1:5:10) (cement: fine 14.00 CUM ONE CUM 3630.00 50820.00
aggregate: Coarse aggregate) for foundations and
under flooring bed using coarse aggregate 40mm
size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all
materials like cement, sand, coarse aggregate, water
etc. to site including all charges for machine mixing
and hire charges of concrete mixer, laying concrete
in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
6 Plain Cement Concrete M 20 nominal mix using 172.00 CUM ONE CUM 5719.00 983668.000
20mm size graded machine crushed hard granite
metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry using
concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate,
water etc. to site including all charges centering,
labour charges such as weigh batching, machine
mixing, hire charges of concrete mixer, laying
concrete in position, curing etc., & lift charges , and
overheads & contractors profit for Kerb stone &
Sasur Drains for finished item of work. (APSS No.
402)
Rate
Unit Amount
Sl. No. Description of Work Quantity In
(in words) (Rs.)
Figures
7 Construction of un-reinforced, dowel jointed at 231.00 CUM ONE CUM 5712.00 1319472.00
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any
other type as per Clause 1501.2.2 M30 (Grade),
coarse and fine aggregates conforming to IS : 383,
maximum in a concrete mixer of not less than 0.2
cum capacity and appropeiate weigh batcher using
approved mix design, laid in approved fixed side
formwork (steel channel, laying and fixing of 125
mictron thick polythene film, wedges, steel plates
including levelling the formwork as per drawing),
spreading the concrete with sholvels, rakes,
compacted using needle, scareed and plate vibrators
and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant,
dowel bars, near approaches to bridge / culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14- days, curing compound (where
specified) and water finishing to lines and grade as
per drawing and Technical Specification Clause
1501 MORD.
8 Plastering 12mm thick single coat in CM(1:5) using 1387.00 SQM ONE SQM 323.00 448001.00
screened sand including cost and conveyance of all
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and
including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge
etc., and overheads & contractors profit complete for
finished item of work.(SS 901,903 & 904)
9 Supply and placing of the Design Mix Concrete M 25 194.25 SQM ONE SQM 5147.00 999804.75
grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using
weigh batcher / mixer with 20mm size graded
machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1
to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to
site, centering using casurina ballies, bamboos,
wooden reapers, runners, wood posts, wall plates
etc., including all operational, incidental and labour
charges such as weigh batching, machine mixing,
lifting of concrete manually, laying concrete,
vibrating, curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS
No. 402) For Retaing wall
Rate
Unit Amount
Sl. No. Description of Work Quantity In
(in words) (Rs.)
Figures
10 Providing Thermo Mechanically Treated (TMT) (Fe 7.30 MT ONE MT 58063.00 423859.9
500 / Fe 500 D grade as per IS 1786-1979) of
different diameters for RCC works including labour
charges for straightening, cutting, bending to
required sizes and shapes, placing in position with
cover blocks of approved materials and size and
tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved
designs and drawings, including cost and
conveyance of steel bars, including all wastages
such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover
blocks and all incidental, operational, labour charges
such as cutting, bending, placing in position, tying
etc., and overheads & contractors profit complete for
finished item of work.( APSS No.126)
11 Flooring with chequered Cement Concrete heavy 189.00 SQM ONE SQM 802.00 151578.00
duty tiles conforming to IS: 13801 using aggregates,
cement, pigments of size 300mm x 300 mm and
thickness 25 mm of any shades as approved by
Engineer - In - Charge set over base coat of cement
mortar (1:6), 12 mm thick using screened sand over
CC bed alredy laid or RCC roof slab including neat
cement slurry of honey like consistency spread @
3.3 kgs per sqm and jointed with neat white cement
to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like
cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
5878790
NAME OF THE WORK :CONSTRUCTION OF PROPOSED SUPER SPECIALTY HOSPITAL AT PALASA,
SRIKAKULAM DISTRICT, ANDRAPRADESH
GENERAL ABSTRACT
Sl.No. Description of Item Amount
b Mechanical ` 2620500
c Electrical ` 574782
e Pipeing ` 104500
f Instrumentation ` 195800
1 Earth work excavation for foundations (Mechanical 589.00 CUM One CUM 101.00 59489.00
Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and
up to 3m depth including all operational,incidental,
labour charges such as shoring, sheeting, planking,
strutting etc., and overheads & contractors profit
complete for finished item of work excluding
dewatering charges etc., as per SS 20 B(APSS 308)
2 Plain Cement Concrete (1:4:8) (cement: fine 31.00 CUM One CUM 3774.00 116994.00
aggregate: Coarse aggregate) for foundations and
under flooring bed using coarse aggregate 40mm size
hard , machine crushed granite from approved quarry
including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site,
including sales & other taxes on all materials and
including all charges for machine mixing, laying concrete
in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level
curing etc., and overheads & contractors profit complete
for finished item of work. (APSS No. 402)
3 Filling with useful available excavated earth 467.00 CUM One CUM 31.00 14477.00
(excluding rock) with a lead of 50 m in trenches, sides of
foundations and basement with initial lead in layers not
exceeding 15cm thick, watering and ramming including
cost and conveyance of water to work site and all
operaitonal, incidental, labour charges, hire charges of
T&P etc., and overheads & contractors profit complete
for fnished item of work (APSS NO.309&310)
4 Conveyance of un-useful excavated earth to a 122.00 CUM One CUM 75.00 9150.00
distance of 5 KM for disposal including hire charges
of T & P, labour charges etc., and overheads &
contractors profit complete for finished item of work.
Sl. Unit Rate Amount
Description of Work Quantity
No. (in words) In Figures (Rs.)
5 Supply and placing of the Design Mix Concrete M 30
grade corresponding to IS 456 with minimum
cement content of 400kgs per 1 cum of concrete
using WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to
Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site and sales &
other taxes on all materials , centering using Steel
scaffolding pipes , jack props , wallers , Foot plates ,
brackets , steel centering plates etc., including all
operational, incidental and labour charges such as
weigh batching, machine mixing,delifting of concrete
Manually, laying concrete, curing etc., and overheads &
contractors profit complete but excluding cost of steel
and its fabrication charges for finished item of work
(APSS No. 402)
a) Roof beams
i) Roof beams between 0.00 to 3.00mts depth from 8.00 CUM One CUM Err:509 Err:509
GL (6.30mts level from base slab)
ii 450 mm thick RCC Side walls 203.00 SQM One SQM Err:509 Err:509
iii 125mm thick Roof Slab 55.00 SQM One SQM Err:509 Err:509
iv 150mm thick Roof Slab 92.00 SQM One SQM Err:509 Err:509
v 175mm thich Roof Slab 10.00 SQM One SQM Err:509 Err:509
8 Plain Cement Concrete M 20 design mix using 2.00 CUM One CUM 5719.00 11438.00
WEIGH BATCHER / MIXER, 20mm size hard granite
machine crushed graded metal (coarse aggregate - as
per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry, using a minimum quantity of 350 kgs.
of cement per 1 cum of concrete including cost and
conveyance of all materials like cement, fine
aggregate (Sand), coarse aggregate, water etc., to site
including steel centering, shuttering, machine mixing,
delifting charges, laying concrete,vibrating, curing,
overheads & contrctors profit etc., complete for finished
item of work (APSS No. 402 & 403)
Sl. Unit Rate Amount
Description of Work Quantity
No. (in words) In Figures (Rs.)
9 Providing Thermo Mechanically Treated (TMT) (Fe 22.60 MT One MT 58063.00 1312223.8
500 grade as per IS 1786-1979) of different diameters
for RCC works , including labour charges for
straightening, cutting, bending to required sizes and
shapes, placing in position with cover blocks of
approved materials and size and tying and lap-splicing
with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and
drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings,
chairs, spacer bars including cost and conveyance of
binding wire, cover blocks and all incidental, operational,
labour charges such as cutting, bending, placing in
position, tying including sales and other taxes on all
materials etc. ,and overheads & contractors profit
complete for finished item of work.( APSS No.126)
10 Brick masonry for panel walls in superstructure with 17.00 CUM One CUM 6270.00 106590.00
CM (1:8) prop: (Cement : Screened sand) using
common burnt clay bricks of class as per Table- I of
IS:1077-1992, Non- Modular or traditional size 23 x 11 x
7 cms from approved source having minimum crushing
strength of 40 Kg/Sqcm. including cost and conveyance
of all materials like cement, screened sand, bricks,
water etc., to site, including sales & other taxes on all
materials and such as labour charges, like mixing
cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc.,and overheads &
contractors profit complete for finished item of work.
(APSS No. 501 & 504).
11 Ornamental ceiling plastering 12mm thick single 48.00 SQM. One SQM. 336.00 16128.00
coat in CM (1:5) using screened sand including cost
and conveyance of all materials like cement, sand,
water etc., to site, including sales & other taxes on all
materials, and all operational, incidental charges on
materials and including cost of all labour charges for
mixing mortar, finishing, curing as directed by Engineer-
in-charge etc., and overheads & contractors profit
complete for finished item of work.(SS 901,903 & 904)
Sl. Unit Rate Amount
Description of Work Quantity
No. (in words) In Figures (Rs.)
12 Plastering 12mm thick in two coats using screened 80.00 SQM. One SQM. 429.00 34320
sand with base coat of 8mm thick in CM (1:6) and
top coat of 4mm thick in CM (1:4) with dubara
sponge finishing including cost and conveyance of all
materials like cement, sand, water etc., to site, including
sales & other taxes on all materials, and all operational,
incidental charges on materials and including cost of all
labour charges for mixing mortar, finishing, scaffolding,
lift charges, curing, including cutting grooves as directed
by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work.
(SS 901,903 & 904)
13 Plastering 20mm thick in two coats using screened sand 89.00 SQM. One SQM. 446.00 39694.00
with base coat of 16mm thick in CM(1:6) and top coat of
4mm thick in CM(1:4) with dubara sponge finishing
including cost and conveyance of all materials like
cement, sand, water etc., to site and all operational,
incidental charges on materials and including cost of all
labour charges for mixing mortar, finishing, scaffolding,
lift charges, curing, including cutting grooves as directed
by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For External Walls
14 Providing impervious coat to exposed RCC roof 55.00 SQM. One SQM. 455.00 25025.00
slab surfaces to required slopes with CM (1:3) prop.
using screened sand 20mm thick (average) mixed with
water proofing compound manufactured by reputed
manufacturers as approved by Engineer-in-charge at 1
Kg per one bag of cement, laid over roof slab when it is
green, finished smooth with a floating coat of neat
cement and thread lining at regular intervals of
45cmx45cm including cost and conveyance of all
materials like cement, sand, water proofing compound,
water etc., to site, including sales & other taxes on all
materials and operational, incidental, and labour
charges for mixing mortar, laying, lift charges, rendering
smooth and thread lining, curing including rounding off
junctions of wall and slab etc., and overheads &
contractors profit complete for finished item of work.
(APSS No. 901 & 903).
15 White washing two coats with white cement to 89.00 SQM. One SQM. 40.00 3560
external walls to give an even shade after
thouroughly brushing the surface to remove all dirt and
remains of loose powdered materials including cost of
all materials , labour charges and incidental such as
scaffolding , lift charges etc., and overheads &
contractors profit complete for finished item of work in all
floors.
Sl. Unit Rate Amount
Description of Work Quantity
No. (in words) In Figures (Rs.)
16 Painting two coats with synthetic enamel paint 5.00 SQM. One SQM. 169.00 845
Grade-II VOC (Volatile Organic Compound) content
less than 50 grams/litre over primer coat of red oxide
to new iron work including cost and conveyance of all
materials to site, sales & other taxes, incidental,
operational and all labour charges etc.,and overheads &
contractors profit complete for finished item of work in all
floors. (SS No. 1201, 1212 & 1207).
17 Flooring with chequered Cement Concrete heavy duty 48.00 SQM ONE SQM 802.00 38496
tiles conforming to IS: 13801 using aggregates, cement,
pigments of size 300mm x 300 mm and thickness 25
mm of any shades as approved by Engineer - In -
Charge set over base coat of cement mortar (1:6), 12
mm thick using screened sand over CC bed alredy laid
or RCC roof slab including neat cement slurry of honey
like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment
of matching shade including cost and conveyance of all
materials like cement, sand, water and tiles etc.,and
overheads & contractors profit complete for finished
item of work.
17 Supply and fixing doors as per drawings with medium 4.20 CUM One SQM 4879.00 20491.8
teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick single shutter
with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides, fixing
1mm thick mat finish laminated sheet to full width
and height of the flush shutter both sides including
cost and conveyance to site of teak wood frame, flush
shutter, laminated sheet including supply and
19 Supplying and fixing of stainless steel ( grade 304 ) 33.00 SQM. One SQM. 3219.00 106227.00
hand railing as per approved drawing with top rail of
50mm dia pipe and 2mm thick medium class and
vertical posts of 25mm dia and 1.6mm thick medium
class 2 Nos for each step fixed with base plate of
75mm dia using bonding agent and anchor fastner and
welding, drilling of 25mm dia holes with pneumatic
compressor for fixing railing, buffing, polishing all
members of the railing thouroughly , lacquer finishing
to present seamless finish including cost and
conveyance of all materials, electrodes, welding
charges, cost of all consumables, labour charges ,
overheads & contractors profit etc., complete for
finished item of work.
Sl. Unit Rate Amount
Description of Work Quantity
No. (in words) In Figures (Rs.)
20 Supply and placing of the Design Mix Concrete M 30 3.00 ONE ONE CUM Err:509 Err:509
grade corresponding to IS 456 with minimum cement
content of 400 kgs per 1 cum of concrete using WEIGH
BATCHER / MIXER with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per
IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and sales & other taxes on
all materials , centering using Steel scaffolding pipes ,
jack props , wallers , Foot plates , brackets , steel
centering plates etc., including all operational, incidental
and labour charges such as weigh batching, machine
mixing, lifting of concrete manually, laying concrete,
vibrating, curing etc., and overheads & contractors profit
complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402) (plinth
beam)
22 Supply and delivery of encapsulated plastic steps 30 Nos ONE Nos 189.00 5670
manufactured as per companies standard specification
including cost of materials packing as per companiess
standards, loading, transportation, unloading and
stacking at site of work , and taxes such as complete
but exclduing taxes and others etc.,as applicalble
including labour charges for fixing etc. complete for
finished item of work.
23 Supplying & fixing 602 x 602 mm CI man hole frame 2 Nos ONE Nos 2913.00 5826
and cover (light weight) 30 Kgs including cost and
conveyance and labour charges for fixing, overheads
and contractor profit etc., complete for finished item of
work
24 Providing 110 mm Dia ISI marked PVC down water take 3 RM ONE RM 272.00 816
pipes with socket , 2.5mm thick 4.0 kg/sq.cm pressure
of ISI marked including cost of necessary PVC Bends,
shoes, iron / PVC clamps and all other accessories and
fixing in position including cost and conveyance of all
materials, sales & other taxes on materials to site,
operational & incidental charges including all labour
charges for fixing at site etc., and overheads &
contractors profit complete for finished item of work.
(APSS No. 1328)
Sl. Unit Rate Amount
Description of Work Quantity
No. (in words) In Figures (Rs.)
25 Providing and fixing factory made uPVC white colour 1.56 Sqm ONE Sqm 6640.00 10358.4
sliding glazed window comprising of uPVC multi-
chambered frame with in-built roller track and sash
extruded profiles duly reinforced with 1.60 ± 0.2 mm
thick galvanized mild steel section made from roll
forming process of required length (shape & size
according to uPVC profile), appropriate dimension of
uPVC extruded glazing beads and uPVC extruded
interlocks, EPDM gasket, wool pile, zinc alloy (white
powder coated) touch locks with hook, zinc alloy body
with single nylon rollers (weight bearing capacity to be
40 kg), G.I fasteners 100 x 8 mm size for fixing frame to
finished wall and necessary stainless steel screws etc.
Profile of frame & sash shall be mitred cut and fusion
26 Supplying and fixing 50mm dia nominal bore Medium 170.00 RM ONE RM 556.00 94520
Grade properties & weight as per IS 1239 ISI mark MS
Tube for fixing of GI Sheet including cost and
conveyance of all materials to work site and all
operational, incidental, labour charges etc., complete for
finished item of work in all floors for stair case head
room roof.
27 Roofing with UV resistant multi-wall polycarbonate 90.00 Sqm ONE Sqm 1546.00 139140
sheets of any colour 6mm thick fixed with Aluminium
Universal glazing set 40mm wide and as per drawing
etc., complete excluding the cost of
purlins,rafters,trusses,aluminium universal glazing set
40mm wide including cost and conveyance of all
materials, labour charges, overheads and contractors
profit etc., complete for finished item of work
2 PCC (1:4:8)
Equalization & Oil & Grease 1 6.15 6.00 0.15 5.54
Three sides of Barscreen 1 2.70 1.35 0.15 0.55
Sludge Holding tank 1 1.85 4.70 0.15 1.30
Biological System 1 18.20 5.40 0.15 14.74
Extra For Treated water tank 1 2.00 7.80 0.15 2.34
Columns Under Excvataion 8 1.670 1.67 0.15 3.35
Anoxic Tank 1 4.500 4.10 0.15 2.77
30.58
SAY 31.00 CUM
466.60
SAY 467.00 CUM
5 Disposal of earth
Total earth work excavation 589.00
Refilling with availabe earth 466.60
122.40
SAY 122.00 CUM
202.80
SAY 203.00 SQM
8 PCC
a Steps for Dry Pump Room 1 12 0.600 0.15 0.300 0.32
Feed pumps 1.000 0.600 1.20 0.500 0.36
Sludge pumps 2.000 0.600 0.60 0.600 0.43
Filter Feed pumps 1.000 1.200 0.60 0.600 0.43
1.55
SAY 2.00 CUM
10 Roof beams
Treated water tank 2 5.90 0.30 0.450 1.59
Cantilever Beams 6 1.460 0.30 0.450 1.18
Pump room 3 8.460 0.30 0.450 3.43
Pump room 2 6.460 0.30 0.450 1.74
7.95
SAY 8.00 CUM
13 HYSD STEEL
Raft 91.23 80.000 Kgs/Cum 7298.25
Columns 2.51 120.00 Kgs/Cum 301.39
Side walls 45.02 120.00 0.350 Kgs/Cum 1890.74
Side walls 202.80 120.00 0.450 Kgs/Cum 10951.20
Roof beams 7.95 120.00 Kgs/Cum 953.53
Roof slab 91.77 80.000 0.150 Kgs/Cum 1101.24
Staircase 10.00 65.000 0.150 Kgs/Cum 97.50
22593.8
Say 22.60 MT
14 Impervious Coat
Pump room
1 8.460 6.46 54.65
54.65
Say 55.00 Sqm
16.11
Say 17.00 cum
17 Internal plastering
Allround Pump Room 1 28.000 3.000 84.00
Deductions
R/S -1 2.000 2.400 -4.80
79.20
Say 80.00 Sqm
18 External plastering
Allround Pump Room 1 29.840 3.125 93.25
89.00
Say 89.00 Sqm
22 100mm dia MS Sleeves @
12.10Kg/RM
4 0.600 2.40
2.40
Say 3.00 RM
or 29.04
Say 30.00 Kgs
0.0300 MT
Say 0.10 MT
23 Impervious coat
Horizontals ( Bar Screen ) 1 2.70 2.250 6.075
Bar screen 2 1.00 2.250 4.500
Buffle Wall 1 0.90 1.500 1.350
Bar screen 1 1.00 0.750 0.750
Oil & Grease 2 0.90 1.350 2.430
Sludge Holding 2 1.50 3.125 9.375
Sludge Holding 1 4.70 3.125 14.688
Bar screen Long Wall 1 2.60 2.25 5.850
Bottom
307.318
614.635
2.67
SAY 3.00 CUM
25 SS Railing
1.00 mt RCC Platform along MBBR- 1 24.250 1.000 24.250
1 to Filter Feed Tank
Staircase 1 3.900 1.500 5.850
Midlanding 2 1.500 1.000 3.000
33.10 Sqm
Say 33.00 Sqm
2 Plain Cement Concrete (1:3:6) (cement: fine 20.00 CUM ONE CUM 4942.00
aggregate: Coarse aggregate) for foundations
using coarse aggregate 40mm size hard , machine
crushed granite from approved quarry using
concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site
including all charges for machine mixing and hire
charges of concrete mixer, laying concrete in
foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
for storm water drain bottom
3 Supply and placing of the Design Mix Concrete M 22.00 CUM ONE CUM 6101.00
25 grade corresponding to IS 456 with minimum
cement content of 380 kgs per 1 cum of concrete
using weigh batcher / mixer with 20mm size graded
machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1
to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to
site, centering using steel scaffolding pipes , jack
props , wallers , foot plates , brackets , steel
centering plates etc., including all operational,
incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete
manually, laying concrete, vibrating, curing etc., and
overheads & contractors profit complete but
excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402)
4 Supply and placing of the Design Mix Concrete M
25 grade corresponding to IS 456 with minimum
cement content of 380 kgs per 1 cum of concrete
using weigh batcher / mixer with 20mm size graded
machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1
to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to
site, centering using casurina ballies, bamboos,
wooden reapers, runners, wood posts, wall
plates etc., including all operational, incidental and
labour charges such as weigh batching, machine
mixing, lifting of concrete manually, laying concrete,
vibrating, curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS
No. 402)
a 100mm thick Drain side walls 306.00 SQM ONE SQM 4207.00
5 Reinforced Cement Concrete M 20 nominal mix 221.00 SQM ONE SQM 748.00
using 12mm size hard granite machine crushed
graded metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved
quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer
10 / 7 cft (0.2 / 0.8 cum) capacity including cost and
conveyance of all materials like cement, fine
aggregate (Sand), coarse aggregate, water etc., to
site including centering, shuttering, labour charges
such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift
charges, curing etc., and overheads & contractors
profit complete for finished item of work (APSS No.
402 & 403) for 100mm thick precast slabs
6 Providing Thermo Mechanically Treated (TMT) 4.90 MT ONE MT 58063.00
(Fe 500 grade as per IS 1786-1979) of different
diameters for RCC works , including labour
charges for straightening, cutting, bending to
required sizes and shapes, placing in position with
cover blocks of approved materials and size and
tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved
designs and drawings, including cost and
conveyance of steel bars, including all wastages
such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover
blocks and all incidental, operational, labour charges
such as cutting, bending, placing in position, tying
etc., and overheads & contractors profit complete for
finished item of work.( APSS No.126)
Amount
(Rs.)
17170
98840
134222
1287342
165308
284509
1987391
NAME OF THE PROJECT :- CONSTRUCTION OF PROPOSED SUPERSPECIALITY HOSPITAL AT PALASA IN
SRIKAKULAM DISTRICT AP
Detailed Estimate for Storm water drain
S.NO DESCRIPTION NOS L B D QUANTITY
3 PCC(1:3:6)
SD2 1 340.00 0.800 0.075 20.400
20.400
Say 20.00 Cum
4 RCC M25 grade
Drain bottom
SD2 1 340.00 0.650 0.100 22.100
22.100
Say 22.00 Cum
7 TMT STEEL
Drain bottom 22.1 50.00 Kgs/Cum 1105.00
100mm thick drain side walls 306.0 80.00 0.100 Kgs/Cum 2448.00
100mm thick precast slab 221.0 60.00 0.100 Kgs/Cum 1326.00
4879.00
Say 4.90 MT
DETAILED ESTIMATE FOR EXTERNAL WATER SUPPLY & SEWERAGE
S.No DESCRIPTION NOS L(M) B(M) QUANTITY
1 External Sewerage
SWG Pipe
200 mm dia 1 65.0 65.00
250 mm dia 1 55.0 55.00
6 CPVC
Bore Point to Sump
100 mm dia 100.00 100.00
7 Sluice valves
100 mm 4 4
9 Butterfly valve 3
Sluice valves
100 mm 300.000
ERAGE
QUANTITY
Rmt
Rmt
Nos
Nos
Rmt
Rmt
Rmt
Rmt
Nos
No
No
RM
NAME OF THE WORK: CONSTRUCTION OF 200 BEDDED SUPER SPECIALITY HOSPITAL WITH KIDNEY RESEARC
CENTRE & DIALYSIS UNIT AT PALASA VILLAGE IN SRIKAKULAM DISTRICT.
2 Plain Cement Concrete (1:5:10) (cement: fine aggregate: 12.00 CUM 1.00 ONE CUM 3630.00
Coarse aggregate) for foundations and under flooring
bed using coarse aggregate 40mm size hard , machine
crushed granite from approved quarry using concrete
Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and
conveyance of all materials like cement, sand, coarse
aggregate, water etc. to site including all charges for
machine mixing and hire charges of concrete mixer, laying
concrete in foundations and under flooring bed, ramming in
15 cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit complete for
finished item of work. (APSS No. 402)
5 Providing Thermo Mechanically Treated (TMT) (Fe 500 10.81 MT 1.00 ONE MT 58063.00
grade as per IS 1786-1979) of different diameters for
RCC works , including labour charges for straightening,
cutting, bending to required sizes and shapes, placing in
position with cover blocks of approved materials and size
and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved
designs and drawings, including cost and conveyance of
steel bars, including all wastages such as overlaps,
couplings, chairs, spacer bars including cost and
conveyance of binding wire, cover blocks and all incidental,
operational, labour charges such as cutting, bending,
placing in position, tying etc., and overheads & contractors
profit complete for finished item of work.( APSS No.126)
6 Brick masonry for panel walls in superstructure with 255.00 CUM 1.00 ONE CUM 6270.00
CM (1:8) prop: (Cement : Sand) using common burnt clay
bricks of class as per Table- I of IS:1077-1992, Non-
Modular or traditional size 23 x 11 x 7 cms from approved
source having minimum crushing strength of 40 Kg/Sqcm.
including cost and conveyance of all materials like cement,
screened sand, bricks, water etc., to site, labour charges,
like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, etc.,and
overheads & contractors profit complete for finished item of
work. (APSS No. 501 & 504).
8 Plastering 12mm thick single coat in CM(1:5) using 3632.00 SQM 1.00 ONE SQM 323.00
screened sand including cost and conveyance of all
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, curing
as directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
9 Providing and fixing of Expansion joint filler board for 0.00 SQM 1.00 ONE SQM 374.00
buildings, columns, beams and slabs 25 mm thick including
cost and conveyance of all materials to site, all incidental,
operational, labour charges etc.overheads & contractors
profit complete for finished item of work as per approved
drawing for all floors
10 Supplying and fixing of MS Gate, doors, grill to windows / in 1944.00 Kgs 1.00 ONE Kgs 89.00
open court yards using MS angles, flat, square bars
including cost and conveyance of all materials, cutting,
bending, welding, all operational charges, labour charges,
overheads and contractor profit etc., complete for finished
item of work.
11 Supply & application of one coat water based cement 3632.00 SQM 1.00 ONE SQM 248.00
primer of exterior grade II and two coats of synthetic
polymer luxury plastic emulsion paint of superior grade
having VOC (Volatile Organic Compound) content less than
50 grams/litre for exterior walls including cost and
conveyance of all materials to site, incidental, operational
and all labour charges etc., and overheads & contractors
profit complete for finished item of work in all floors.
Amount
(Rs.)
8383
43560
103550
556050
198940
627661
1598850
1173136
173016
900736
5459946
3 VRCC
a Column footings.
F1 181 0.65 0.65 0.20 15.29
Say 15.30 Cum
b Columns
below G.L
C1/F1 181 0.23 0.45 0.90 16.86
Say 17.00 Cum
above G.L
C1/F1 181 0.23 0.45 0.15 2.81
Say 2.90 Cum
c Plinth beam
1 597.00 0.45 0.30 80.60
Dedction for columns 181 0.23 0.45 0.30 -5.62
74.97
Say 75.00 Cum
4 TMT STEEL
Footings 15 Cum 60.00 Kg/cum 917.67
columns 20 Cum 120.00 Kg/cum 2388.00
Plinth beam 75 Cum 100.00 Kg/cum 7497.50
10803.17 Kgs
Say 10.81 MT
3632.00
Say 3632.00 Sqm