Professional Documents
Culture Documents
(Lead) charges
(Lead) charges (Lead) charges
(Lead) charges for trucks and
for trucks and for trucks and
for trucks and tippers per (Lead) charges
tippers for tippers for
tippers for cu.meter for for trucks and (Lead) charges for
Earth / Rubble /Size Cement/ Steel/ PCC slabs/ tippers per trucks and tippers
Sl No. Distance Sand /Gravel / stones/ Cut RCC poles/ AC Shahabad cu.meter for for Bricks /1000
Murrum/ Stones/ & GI sheets/ slabs/ CC & water/ 1000 nos
Coarse Laterite litres
Lime/ Surki/ Packed
aggregate per blocks/
per cu.meter
cu.meter materials/tonne
Wood/ cum
1 2 3 4 5 6 7 8
1 Lead up to 1 km 1 42.60 41.10 25.70 60.40 25.00 68.50
2 Lead up to 2 km 2 59.70 57.50 36.00 84.60 35.10 95.90
3 Lead up to 3 km 3 79.50 79.50 49.70 117.00 46.80 127.90
4 Lead up to 4 km 4 96.60 96.60 60.40 142.00 56.80 155.30
5 Lead up to 5 km 5 113.60 113.60 71.00 167.10 66.80 182.60
6 for Every km beyond 5 km up to 30 km 30 17.00 17.00 10.70 25.10 10.00 27.40
7 for Every km beyond 30 km 10000 14.20 14.20 8.90 20.90 8.30 22.80
Rubble/ size
Earth /
stone/ cut
Sand /Gravel
stone/ Coarse Cement in Steel in Bricks Rs/1000
Sl No. Description of item Murrum/ /
aggregate, Rs/Tonne Rs/Tonne Nos.
Surki/ Rs /
Lime in
cum
Rs/cum
TBSP-E.I-03 &
14 Orissa pan 580mmx440mm - ISI marked 179 & 184 2101.00
TBSP-E.VIII-02
15 Brick masonry seat 179 TBSP-E.I-06 321.00
16 C.C Squatting plate 179 TBSP-E.I-07 96.00
TBSP-E.II-02 &
17 S&F EWC with'S' trap 180 & 184 2008.00
TBSP-E.VIII-06
TBSP-E.V-01 &
18 S&F Plastic seat and lid for EWC 181, 184 1235.00
TBSP-E.VIII-07
TBSP-H.II-07,
a) 10ltrs capacity single flush 195 & 184 TBSP-E.VIII- 1679.00
04
b) 8 lts capacity single flush 195 TBSP-H.II-09 950.00
39 Pipe clip
a) 75mm dia. 197 TBSP-H.II-59 18.00
b) 90mm dia. 197 TBSP-H.II-60 20.00
c) 110mm dia. 197 TBSP-H.II-61 21.00
d) 160mm dia. 197 TBSP-H.II-62 41
40 3" (75mm) Nahany trap with jali 197 TBSP-H.II-73 117.00
41 4" (101.6mm) multi floor trap with jali 197 TBSP-H.II-74 165.00
Labour charges for laying, fixing and
42 198 TBSP-H.IV-01
commissioning the PVC pipes
1 RM 550.00 491.00
1 RM 475.00 423.00
1 RM 795.00 708.00
1 RM 707.00 630.00
1 RM 291.00 252.00
1 RM 362.00 313.00
40.00 1 RM 30.00
62.00 1 RM 47.00
1 Rm
1 Rm
1 Rm
1 Rm
118 MS powder coated tower bolt 100mm long 119 TBSC-P.I-14 28.00
119 MS powder coated tower bolt 150mm long 119 TBSC-P.I-15 40.00
120 MS powder coated tower bolt 200mm long 119 TBSC-P.I-16 59.00
122 Stainless Steel Butt hinges 150mm long 120 TBSC-P.II-22 167.00
123 Powder coated butt hinges 100mm long 120 TBSC-P.II-10 25.00
MS powder coated Butt hinges 150mm
124 120 TBSC-P.II-12 45.00
long
125 Friction stay hinges for windows 120 TBSC-P.II-15 239.00
126 Stainless Steel handle 125mm long 121 TBSC-P.III-16 128.00
127 Stainless Steel handle 150mm long 121 TBSC-P.III-17 157.00
128 MS powder coated handle 125mm long 120 TBSC-P.III-05 36.00
129 MS powder coated handle 150mm long 120 TBSC-P.III-06 52.00
130 Brass fancy handle 150mm long 120 TBSC-P.III-07 346.00
131 Brass fancy handle 450mm long 120 TBSC-P.III-11 1683.00
132 Brass aldrop 300mm long 121 TBSC-P.IV-01 1321.00
133 Brass aldrop 450mm long 121 TBSC-P.IV-03 3622.00
134 Stainless Steel aldrop 250mm long 121 TBSC-P.IV-11 312.00
135 Stainless Steel aldrop 300mm long 121 TBSC-P.IV-12 343.00
136 MS powder coated aldrop 250mm long 121 TBSC-P.IV-08 154.00
137 MS powder coated aldrop 300mm long 121 TBSC-P.IV-09 185.00
138 Cost of hydraulic floor springs 121 TBSC-P.VII-03 3967.00
139 Brass door stopper 122 TBSC-P.IX-01 205.00
140 MS powder coated door stopper 122 TBSC-P.IX-02 52.00
141 Heavy duty Al.door stopper 122 TBSC-P.IX-03 66.00
167 Dismantling
a) Stone masonry in cement mortar 141 TBSC-U.I-01 571.00
Flat stone in roof or floors including
b) 141 TBSC-U.I-03 22.00
lifting :
Pan tiled or Mangalore tiled roof with out
c) 141 TBSC-U.I-04 20.00
roof timbers :
Wrought and framed timber in roofs or
d) 141 TBSC-U.I-06 297.00
floors
e) Old lime mortar plaster 141 TBSC-U.I-07 7.00
f) Old cement mortar plaster 141 TBSC-U.I-08 8.00
Kadapa slabs or shahabad stone slabs on
g) 141 TBSC-U.I-11 11.00
sand bed
Clean removal of lime plaster from walls
and raking out joints 20mm deep or from
h) 141 TBSC-U.I-14 7.00
terraced roof and raking out joints 100 mm
deep
Clean removal of cement plaster from
i) 141 TBSC-U.I-15 8.00
walls and raking out joint 200 mm deep
Buildings
Referenc
Material hire Labour
168 Hire charges for Access Scaffolding e to SSR
charges charges
page
1st
Floor
a) Footings 152 325.00 760.00
b) Bed blocks, Steps 72.00 392.00
c) Pedestals 369.00 1209.00
d) Plinth beams 1566.00 1833.00
1st
Floor
a) Lintels 155 1330.00 1945.00
b) Sunshades of any width 263.00 299.00
c) Columns 400.00 2732.00
d) Beams 2349.00 2291.00
e) RCC roof slabs upto 150 mm depth 266.00 260.00
f) RCC slabs upto 150-300 mm depth 274.00 267.00
172 HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported height of 3.66
Buildings Referenc Material hire
e to SoR charges
1st
Floor
a) Lintels 156 886.00 1489.00
b) Sunshades of any width 175.00 229.00
c) Columns 267.00 2091.00
d) Beams 1566.00 1753.00
e) RCC roof slabs upto 150 mm depth 177.00 199.00
f) RCC slabs upto 150-300 mm depth 183.00 204.00
g) RCC walls, water tank walls PH- 31 (b) 4 1183.00
(RCC vertical walls)
173 Plumbing
PVC Clamps 110 mm items 197 TBSP-H.II-61 21.00
Plumbing
PVC Clamps 160 mm items 197 TBSP-H.II-62 41.00
Part I (I&CAD
LABOUR CHARGES Works)
SKILLED
174 Bar bender 12 I-1 685.00
175 Blacksmith 12 I-2 575.00
176 Blaster (licensed) 12 I-3 685.00
177 Carpenter 12 I-4 685.00
178 Work Inspector(Non technical) 12 I -10 685.00
179 Mason / Brick layer 12 I -11 580.00
180 Operator concrete mixer 12 I -16 615.00
181 Operator Jackhammer / Pneumatic I - 23
tamper(skilled) 12 605.00
182 Painter 13 I - 35 665.00
183 Plumber(licensed) / Pipe fitter 13 I - 36 675.00
SEMI SKILLED
183 Sprayer(semi skilled) 13 II - 1 550.00
184 Carpenter 13 II - 4 550.00
185 Plumber / Pipe fitter 13 II - 9 550.00
185 Mason / Brick layer 14 II - 35 550.00
186 Painter 14 II - 37 550.00
Crowbarman / Jumperman 13 II - 8 550.00
Bhisti 13 II - 2 550.00
UN SKILLED
Heavy Mazdoor / Light Mazdoor
187 14 III - 3, 4 520.00
Part I (I&CAD
Cost of Materials : Works) Common SoR
188 Binding wire 1 Sl.No.3 71.00
189 Detonator electric 2 21 12.00
190 Sand (un-screened for concrete items) 2 27a 630.00
191 Sand un-screened for filling 2 27 630.00
192 Sand(screened for mortar, plastering
items) 2 28 830.00
193 Impervious Water proof compound 3 80 108.00
194 Roads&
Bridges
Gravel / Quarry spall Works S.No.89/34 108.00
195 Aggregates 6mm nominal size (HBG) S.No.25/33 a 800.00
196 Aggregates 10mm nominal size (HBG) S.No.25/33 b 950.00
197 Aggregates 13.20 / 12.50mm nominal size
(HBG) S.No.25/33 c 1050.00
198 Aggregates 20mm nominal size (HBG) S.No.25/33 d 1100.00
199 Aggregates 40mm nominal size (HBG) S.No.25/33 f 903.00
200 SoR
Gelatin 80% 2015-16 M - 104 73.00
201 Water charges (Urban) 276 108.00
202 Water charges (Rural) 275 80.00
203 PHE PH Items
PVC pipes 110mm dia. 4kg/cm2 Items Table17 227.00
PHE PH Items
PVC pipes 160mm dia. 4kg/cm2 Items Table17 349.00
1 Sqm 3274.00
1 Kg 44 TBSC-D.VI-04 68.00
1 Kg 46 TBSC-E.I-15 75.00
1 Kg 47 TBSC-E.III-01 434.00
1 Kg 49 TBSC-G.I-01 173.00
1 Kg 49 TBSC-G.I-02 221.00
1 Kg 49 TBSC-G.I-03 41.00
1 Kg 50 TBSC-G.II-03 63.00
82
1 Kg 50 TBSC-G.II-04 60.00
1 Kg 50 TBSC-G.VI-01 43.00
1 Kg 50 TBSC-G.VI-02 55.00
1 sqm DELETED
1 sqm 56 TBSC-K.I-05 599.00
1 sqm 56 TBSC-K.I-06 701.00
1 sqm 57 TBSC-K.I-24 28.00
1 RM 67 TBSC-K.II-01 76.00
1 RM 67 TBSC-K.II-02 88.00
1 RM 67 TBSC-K.II-03 87.00
1 RM 67 TBSC-K.II-04 76.00
1 RM 67 TBSC-K.II-05 43.00
1 RM 67 TBSC-K.II-07 57.00
1 RM 67 TBSC-K.II-08 42.00
1 RM 67 TBSC-K.II-09 49.50
24x32 Rs. 50
1 RM 67 TBSC-K.II- 10 49.50
24x32 Rs. 50
1 RM 67 TBSC-K.II-11 48.00
1 RM 67 TBSC-K.II-12 29.00
1 RM 67 TBSC-K.II-13 36.00
768
1 No. 67 TBSC-K.II-14 5.00
1 No. 67 TBSC-K.II-15 5.00
1 No. 67 TBSC-K.II-16 5.00
1 No. 67 TBSC-K.II-17 5.00
1 No. 67 TBSC-K.II-18 5.00
1 Kg. 67 TBSC-K.II-19 31.00
1 RM 67 TBSC-K.II-20 7.00
1 Ltr 67 TBSC-K.II-21 145.00
1 No. 67 TBSC-K.II-22 5.00
1 RM 67 TBSC-K.II-23 13.00
1 RM 67 TBSC-K.II-24 12.00
3490
1 RM Delited 735.00
688
5937
1 sqm 8000.00
Referenc
Material hire Labour
Unit e to SSR
charges charges
page
1 Sqm 153 11.66 94.29
1 Sqm 11.66 135.61
1 Sqm 11.66 176.93
1 Sqm 11.66 218.25
1 Sqm 11.66 259.57
1 Sqm 11.66 300.89
1 Sqm 11.66 342.20
1 Sqm 11.66 383.52
1 Sqm 11.66 424.84
1 Sqm
Labour charges
SCAFFOLDING -Unsupported height of 3.66M - Steel scaffolding pipes, jack props, Steel centering Plates etc.
Labour charges
NG -Unsupported height of 3.66M - Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,
Labour charges
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
1 Each
2018-19
1 Kg 50
1 No. 8
1 Cum
1 Cum
1 Cum
1 Kg 79
1 Cum
1 Cum 505.00
1 Cum 657.00
1 Cum 781.00
1 Cum 870.00
1 Cum 505.00
1 Kg
1 KL
1 KL
1 RM
1 RM
SoR 2018-19
Hire & Fuel SoR 2018-
Crew 19 Crew
charges
charges charges SoR 2017-
18
1 hour 288.30 1121.60 237.10 983.90
1 hour 454.80 237.50 370.60 237.10
1 cum
1 cum
1 RM
0 0
1 cum 0.00
1 cum
1 RM
1 Hour
1 Hour
1 Hour I & CAD
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour I & CAD
1 Hour
1 Hour
1 Hour
1 Hour I & CAD
1 Hour
1 Hour I & CAD
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour
1 Hour
1 sqm
1 No.
1 No.
1 No.
1 RM
1 RM
1 No.
1 No.
1 No.
1 sqm
1 No.
1 RM
1 sqm
1 No.
1 No.
1 No.
Previous SSR 2017-18
TBSC-H.IV-22 667.00
45 24x25 Rs. 45 41
45 24x25 Rs. 45 41
Previous SSR
Supply and fixing of prepainted steel sliding door - 3 track - 3 panel sliding doorsliding
2017-18 2018-19
75.68 79.46
108.36 113.78
141.04 148.09
173.72 182.41
206.4 216.72
239.08 251.03
173.72 182.41
206.4 216.72
239.08 251.03
7.57 7.95
10.84 11.38
14.1 14.80
17.37 18.24
20.64 21.67
23.91 25.11
173.72 182.41
206.4 216.72
239.08 251.03
15.15 15.91
21.5 22.57
27.84 29.23
34.19 35.90
40.54 42.56
46.88 49.22
206.4 216.72
239.08 251.03
ring plates etc.,75.95
Unit
9th
Floor
1 Cum
705.60 1 Cum 325.00
1 Cum
1 Cum
Plates etc.
Unit
9th
Floor
3501.0 1 Cum
538.00 1 Sqm
4918.0 1 Cum
4124.0 1 Cum
468.00 1 Sqm
481.00 1 Sqm
Unit
9th
Floor
2680.0 1 Cum 2607
412.00 1 Sqm 400
3764.0 1 Cum 3663
3155.0 1 Cum 3071
358.00 1 Sqm 348
367.00 1 Sqm 359
1 Sqm
Blasting
Charges Crushing Charges
70 126.25 701.25
70 164.25 891.25
70 195.25 1046.25
70 217.5 1157.50
70 126.25 701.25
10
100
40
20
26
32
600
32
10
170
80
224
100
30
30
675
641
100
75
174
A Name of the Work: PROPOSED ESTABLISHMENT OF HOSPITAL AT MANCHERIAL
IN MANCHERIAL DISTRICT, TELANGANA STATE
D Allowances
1 Add for MA @ 20% 20%
2 Overheads & Contractors Profit @ 13.615% 13.615%
LEAD CHART (COMMON SoR 2022-2023) (Cement & Steel - March, 2023 rates)
Reference Convey- Unloading MA
Sl. Source of to SSR S.No./ Item Lead in Initial ance Loading charges
Description Unit Total
No. Materials page Code No. KM Cost Charges (-) charges (-) 20%
number 13.615% 13.615%
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1 Ordinary Portland Cement 43 / 53 grade (including 1 MT 5200.00 5200.00
loading charges)
2 Reinforcement steel Fe- 500 1 MT 60000.00 60000.00
3 Reinforcement steel Fe- 415 1 MT 0 0
4 Mild steel bars 1 MT 61000.00 61000.00
5 Structural steel 1 MT 61000.00 61000.00
6 MS flats 1 MT 62000.00 62000.00
7 Sand (un-screened for concrete items) Godavari 2 27a 1 Cum 5.00 630.00 62.50 692.50
8 Sand (screened for mortar, plastering items) Godavari 2 28 5.00 830.00 62.50 892.50
9 Sand for filling Godavari 2 27 1 Cum 5.00 630.00 62.50 692.50
10 Common burnt clay bricks (23x11x7cm) Local 34 TBSC-A.I-01 1000 Nos 5.00 9000.00 100.43 97.43 19.49 9217.35
11 Flyash cement / lime solid blocks (50 Kgs/ sq.cm) Local 34 TBSC-A.II-08 1000 Nos 5.00 32000.00 518.02 32518.02
290mmx225mmx140mm
12 Flyash cement / lime solid blocks (50 Kgs/ sq.cm) Local 34 TBSC-A.II-11 1000 Nos 5.00 14000.00 230.23 14230.23
290mmx100mmx140mm
13 Aggregates 40mm nominal size (HBG) Kannala 0 S.No.25/33 f 1 Cum 40.00 903.00 562.87 1465.87
14 Aggregates 20mm nominal size (HBG) Kannala 0 S.No.25/33 d 1 Cum 40.00 1100.00 562.87 1662.87
15 Aggregates 13.20 / 12.50mm nominal size (HBG) Kannala 0 S.No.25/33 c 1 Cum 40.00 1050.00 562.87 1612.87
16 Aggregates 10mm nominal size (HBG) Kannala 0 S.No.25/33 b 1 Cum 40.00 950.00 562.87 1512.87
17 Aggregates 6mm nominal size (HBG) Kannala 0 S.No.25/33 a 1 Cum 40.00 800.00 562.87 1362.87
(Part II)
18 Rough Stone (OTG) Kannala Roads & Sl.No.1 1 Cum 40.00 167.00 562.87 729.87
Bridges
(Part II)
19 Rough Stone (HBG) Kannala Roads & Sl.No.12 1 Cum 40.00 263.00 562.87 825.87
Bridges
Reference Convey- Unloading MA
Sl. Source of to SSR S.No./ Item Lead in Initial ance Loading charges
Description Unit Total
No. Materials page Code No. KM Cost Charges (-) charges (-) 20%
number 13.615% 13.615%
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
20 Gravel / Quarry spall Local 0 S.No.89/34 1 Cum 10.00 108.00 137.31 245.31
21 Polished Shahabad / Tandur stone slabs 15mm to Local 35 TBSC-B.I-03 10 Sqm 0.00 2700.00 0.00 4.07 0.81 2704.88
18mm thick
22 Polished black Kadapa slabs 15mm to 18mm thick Local 35 TBSC-B.I-06 10 Sqm 0.00 1540.00 0.00 4.07 0.81 1544.88
1 Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air
tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except
rock requiring blasting) and refilling with watering and tamping to the required slope including cost and
conveyance of all materials to site and all labour charges, overheads & contractor profit etc., complete for
finished item of work (APSS NO 1301 & 1318).
2 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a
minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both
inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a
depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick
using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification
and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of
seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished
item of work as per Standard specification.
4 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber
upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20
Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of
seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished
item of work as per Standard specification.
5 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with
C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with
304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost
and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for
finished item of work.
6 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site
requirements with standard practice for all floors including cost and conveyance of all materials to site,
labour charges , overheads & contractors profit etc., complete for finished item of work.
Add MA on labour charges for fixing Orissa pan 0.20 527.00 105.40
TBSP-E.VIII-02
Cost of Brick masonry seat TBSP-E.I-06 1 No. 321.00 1 Each 321.00
Cost of C C squatting plate TBSP-E.I-07 1 No. 96.00 1 Each 96.00
Cost of slim line PVC flush tank 10 Ltrs. capacity 1 No. 1679.00 1 Each 1679.00
single flush TBSP-H.II-07
15 mm nominal size CP finish brass angled stop 1 No. 251.00 1 Each 251.00
valve TBSP-F.IV-03/TBSP-F.VIII-02
Add MA on labour charges for fixing angle stop cock 0.20 128.00 25.60
12.70mm PVC connection with brass union nuts 1 No. 119.00 1 Each 119.00
TBSP-J.I-32
Add MA on labour charges for fixing PVC 0.20 0.00 0.00
connection with brass union nuts
31.75mm brass plumber union TBSP-F.VII-30 1 No. 74.00 1 Each 74.00
Add MA on labour charges for fixing 31.75mm brass 0.20 0.00 0.00
plumber union
Cutting holes in brick masonry TBSP-J.I-22 1 No. 62.00 1 Each 62.00
Add MA on labour charges for cutting holes in brick 0.20 62.00 12.40
masonry
Teak wood blocks 76.2mm x 101.6mm TBSP-J.I-31 2 Nos. 29.00 1 Each 58.00
Add MA on labour charges for fixing Teak wood 0.20 0.00 0.00
blocks
4904.40
Overheads & Contractors Profit @ 13.615% 0.13615 4904.40 667.73
5572.13
Rate per Each 5572
12.70mm dia PVC connection with brass union nuts 1 No 119.00 1 Each 119.00
TBSP-J.I-32
Add MA on labour charges for fixing PVC 0.20 0.00 0.00
connection with brass union nuts
Cutting holes in brick masonry TBSP-J.I-22 1 No. 62.00 1 Each 62.00
Add MA on labour charges for cutting holes in brick 0.20 62.00 12.40
masonry
Cost of 76.2 x 101.60 mm teakwood blocks TBSP- 2 Nos 29.00 1 Each 58.00
J.I-31
Add MA on labour charges for fixing Teak wood 0.20 0.00 0.00
blocks
5545.60
Overheads & Contractors Profit @ 13.615% 0.13615 5545.60 755.03
6300.63
Rate per Each 6301
2710.00
Overheads & Contractors Profit @ 13.615% 0.13615 2710.00 368.97
3078.97
Rate per Each say 3079
10 Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and
conveyance of all materials, labour charges for fixing, overheads & contractors profit for finished item of work
in all floors
Cost of NP soap dish TBSP-F.VII-21/TBSP-F.VIII-04
1 No. 601.00 1 Each 601.00
Add for MA @ 20% 0.20 128.00 25.60
626.60
Overheads & Contractors Profit @ 13.615% 0.13615 626.60 85.31
711.91
Rate per Each say 712
11 Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back
with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads &
contractors profit for finished item of work in all floors.
13 Supplying and fixing 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type
(full turn) with internal / external threaded connection conforming to IS 8931 as approved by the Engineer-In-
Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit
complete for finished item of work in all floors.
Rate as per SSR TBSP-F.I-01 / TBSP- 1 No. 261.00 Each 261.00
F.VIII-01
Add for MA @ 20% 0.20 64.00 12.80
273.80
Overheads & Contractors Profit @ 13.615% 0.13615 273.80 37.28
311.08
Rate per Each say 311
14 Supplying and fixing 15 mm brass body CP finish self closing tap push type conforming to IS 1711 as
approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges,
overheads & contractors profit complete for finished item of work in all floors.
15 Supplying and fixing Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with
1m long tube and wall hook with 7 - 10 years warranty with necessary fittings etc., complete including
cost and conveyance of all materials, labour charges, overheads & contractor profit complete for finished item
of work in all floors.
Rate as per SSR TBSP-F.I-07/TBSP-F.VIII-01 1 No. 3400.00 Each 3400.00
Add for MA @ 20% 0.20 64.00 12.80
3412.80
Overheads & Contractors Profit @ 13.615% 0.13615 3412.80 464.65
3877.45
Rate per Each say 3877
16 Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm.
and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site
requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and
conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item
of work at all floor levels. (APSS No. 1302 1319 & 1326)
a) 75mm dia
Data for 6 RM
Cost of 75mm dia pipe TBSP-H.I-01 6.00 RM 290.00 3 RM 580.00
Cost of PVC clamps TBSP-H.II-59 3 Nos. 18.00 Each 54.00
Labour charges TBSP-H.IV-01 6.00 RM 99.00 1 RM 594.00
Add for MA @ 20% 0.20 594.00 118.80
1346.80
Rate per 1 RM 224.47
Overheads & Contractors Profit @ 13.615% 0.13615 224.47 30.56
b) 110mm dia
Data for 6 RM
Cost of 110mm dia pipe TBSP-H.I-03 6.00 RM 549.00 3 RM 1098.00
Cost of PVC clamps TBSP-H.II-61 3 Nos. 21.00 Each 63.00
Labour charges TBSP-H.IV-01 6 RM 99.00 1 RM 594.00
Add for MA @ 20% 0.20 594.00 118.80
1873.80
Rate per 1 RM 312.30
Overheads & Contractors Profit @ 13.615% 0.13615 312.30 42.52
354.82
say 355
17 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11
to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot
and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for
fixing, overheads & contractors profit complete for finished item of work at all floor levels.
a) 15.90mm OD pipe
Rate as per SoR TBSP-J.III-07 1 No. 166.00 Each 166.00
Overheads & Contractors Profit @ 13.615% 0.13615 166.00 22.60
Rate per 1 RM 188.60
say 189
b) 22.20mm OD pipe
Rate as per SoR TBSP-J.III-08 1 No. 201.00 Each 201.00
Overheads & Contractors Profit @ 13.615% 0.13615 201.00 27.37
Rate per 1 RM 228.37
say 228
c) 28.60mm OD pipe
Rate as per SoR TBSP-J.III-09 1 No. 241.00 Each 241.00
Overheads & Contractors Profit @ 13.615% 0.13615 241.00 32.81
Rate per 1 RM 273.81
say 274
d) 34.90mm OD pipe
Rate as per SoR TBSP-J.III-10 1 No. 328.00 Each 328.00
Overheads & Contractors Profit @ 13.615% 0.13615 328.00 44.66
Rate per 1 RM 372.66
say 373
e) 41.30mm OD pipe
f) 54.00mm OD pipe
Rate as per SoR TBSP-J.III-12 1 No. 593.00 Each 593.00
Overheads & Contractors Profit @ 13.615% 0.13615 593.00 80.74
Rate per 1 RM 673.74
say 674
18 Supplying and fixing 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 in
ground or on wall with GI fittings such as elbows tees couplings, nipples, plugs including excavation for
trenches and refilling the trenches ,chiselling masonry walls and making good the walls & floors to the original
surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and
labour charges , overheads & contractors profit complete for finished item of work except for GI bends union
and GI connectors with checkout and socket Tata or Zenith make or equivalent.
19 Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type
including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for
finished item of work.
a) 20mm Nominal bore
Rate as per SSR TBSP-G.III-02 1 No. 909.00 Each 909.00
Overheads & Contractors Profit @ 13.615% 0.13615 909.00 123.76
1032.76
Rate per Each say 1033
20 Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double
layer approved brand and manufacture with cover and suitable locking arrangement and making necessary
holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost
and conveyance of all materials and labour charges , overheads & contractors profit complete for finished
item of work.
a) 110mm dia
Data for 6 RM
Cost of 160mm dia pipe Rate approved by SE in
Non SSR Items vide ref.SE/TSMSIDC Circle
/KNR/2018-19/594; Dt: 24-10-2018 1.00 RM 392.58 1 RM 392.58
Labour charges for laying,jointing & refilling etc,25%
on material cost 0.25 392.58 98.15
490.73
Rate per 1 RM 490.73
Overheads & Contractors Profit @ 13.615% 0.13615 490.73 66.81
557.54
say 558
b) 160mm dia
Data for 6 RM
Cost of 160mm dia pipe Rate approved by SE in
Non SSR Items vide ref.SE/TSMSIDC Circle
/KNR/2018-19/594; Dt: 24-10-2018 1.00 RM 787.00 1 RM 787.00
Labour charges for laying,jointing & refilling etc,25%
on material cost 0.25 787.00 196.75
983.75
Rate per 1 RM 983.75
Overheads & Contractors Profit @ 13.615% 0.13615 983.75 133.94
1117.69
say 1118
c) 315mm dia
Data for 6 RM
Cost of 315mm dia pipe Rate approved by SE in
Non SSR Items vide ref.SE/TSMSIDC Circle
/KNR/2018-19/594; Dt: 24-10-2018 1.00 RM 2769.67 1 RM 2769.67
Labour charges for laying,jointing & refilling etc,25%
on material cost 0.25 2769.67 692.42
Rate per 1 RM 3462.09
Overheads & Contractors Profit @ 13.615% 0.13615 3462.09 471.36
3933.45
say 3933
21 Supply & Fixing of G.I U Type clamps to support SWR & CPVC pipes, including cost and conveyance of
all materials to site, labour charges, complete for finished item of work at all floor levels.
a) For 25 to 75mm dia pipes
Rate as per lowest quotation 1.00 Nos 140.00 1 Nos 140.00
140.00
b) For 100 mm dia pipes
Rate as per lowest quotation 1.00 Nos 170.00 1 Nos 170.00
170.00
c) For 150 mm dia pipes
Rate as per lowest quotation 1.00 Nos 192.00 1 Nos 192.00
192.00
23 Supplying & Fixing Indian make white glazed vitreous china porcelain sink conforming to IS:2556-Part-5-1994
on cantilever brackets with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel
pipe thread conforming to IS:2963-1979 : 750 x 450 x 250of Ist quality ncluding chiselling brick masonry wall
and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of
work in all floors.
24 Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with
integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-
1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass
plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make, 30mm dia PVC flexible
waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour
charges etc., overheads & contractors profit complete for finished item of work for all floors.
26 Supplying and fixing of 101.60mm x 609.60mm white glazed porcelain channels 1st quality fixed in brick
masonry to the required slopes, white cement pointing including cost and conveyance of all materials and
labour charges, overheads & contractors profit complete for finished item of work for all floors.
27 Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in CM
(1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and conveyance of all
materials and all labour charges, overheads & contractors profit complete for finished item of work for all
floors.
a) 65.00mm OD pipe
Rate as per market 1 RM 600.00 RM 600.00
Overheads & Contractors Profit @ 13.615% 0.13615 600.00 81.69
Rate per 1 RM 681.69
say 682
b) 80.00mm OD pipe
Rate as per market 1 RM 800.00 RM 800.00
Overheads & Contractors Profit @ 13.615% 0.13615 800.00 108.92
Rate per 1 RM 908.92
say 909
c) 100.00mm OD pipe
Rate as per market 1 RM 1000.00 RM 1000.00
Overheads & Contractors Profit @ 13.615% 0.13615 1000.00 136.15
Rate per 1 RM 1136.15
say 1136
d) 150.00mm OD pipe
Rate as per market 1 RM 1300.00 RM 1300.00
Overheads & Contractors Profit @ 13.615% 0.13615 1300.00 177.00
Rate per 1 RM 1477.00
say 1477
NAME OF THE WORK :- ESTABLISHMENT OF NEW MEDICAL COLLEGE & HOSPITAL AT SURYAPET .
2 Supplying and fixing of Hose Cabinet of size each 1 Nos 5130 5130
750mm X 600mm x 250mm made of No 16
gauge SWG CRCA sheet with 6mm thick
glazed glass door including necessary
locking arrangement suitable to accommodate
2 Nos 15 mtr long Hose pipe, 1 No branch
pipe, mounted on wall OR raised brick platform
and duly painted with Post office red externally
and white internally with synthetic enamel
paint complete in all respect, for external
hydrant as required.
Make: Mini Max / Safex / Newage / Winco /
Padmini.
3 Supply and fixing 63mm dia, 15 mtr long RRL each 1 Nos 5630 5630
hose pipe with 63mm dia Male and Female Gun
metal / SS couplings duly binded with GI wire,
rivets etc conforming to IS 636 (Type -A) as
required. Make: Mini Max / Safex / Newage /
Winco /
Newtech / Padmini.
4 Supply and fixing 63mm dia Gun metal branch each 1 Nos 2420 2420
pipe with 20mm (Nominal internal diameter) size
Gun metal conforming to IS 903, suitable for
instantaneous connection to interconnect hose
pipe coupling as required.
Make : Mini Max / Safex / Newage / Winco /
Newtech / Padmini.
5 Supply and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red,
Conforming to IS 884
with upto date amendments, complete with the following
eachas required.
1 Nos 7035.00 7035
6 Supply, Transportation, laying, testing & commissioning following of 'B' class heavy duty MS pipe
conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,
gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with
two or more coats of synthetic enamel paint of required shade complete as required
Makes : Jindal / Hissar / Tata pipes
7 Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat
duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes
as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve / Honeywell.
9 Supply and fixing air vessel made of 250 mm each 1 Nos 15750 15750
dia, 8 mm thick MS sheet, 1200mm in height
with air release valve on top and flanged
connection to riser, drain arrangement with
25mm dia Gun metal wheel valve, with required
accessories, pressure gauge and painting with
synthetic enamel paint of approved shade as
required.
15 Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat
duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes
a as
150required.
mm dia each 1 Nos 6270 6270
Contractor Profit 13.615% 854
Rate Per Each 7124.00
16 Supply and fixing Flow Switches in 150 mmdia Each 1 Each 7350 7350
MS pipe.
Makes : System Sensor / Switzer
13.615% 1001
8351.00
22 Supply, Installation, testing and commissioning of EN54-2 Listed and UL approved based analog
addressable 2 loop micro processor fire control panel expandable by minimum 2 additional loops with
minimum 640processor
4 loop micro character LCD display. Each loop of panel
each shall have
1 maximum
Nos capacity
241500 250analogue
241500
Contractor Profit 13.615% 32880
Rate Per Each 274380.00
23 Supply and Run of 2 Core x 1.5Sqmm FRLS armoured copper cable on ceiling / wall as per IS. 7098 /
Part-I / 1988
a) Labour including
charges : all taxes etc., complete.
Skilled Electrician. 1.00 day day 660.00 660.00
Lineman Electric / Telephone 1.50 day day 550.00 825.00
Helper (Electrical). 1.00 day day 550.00 550.00
Labour for 100 Mtr 2035.00
13.615% 11275
94085.00
29 Supply and Run of 2 Core x 1.5Sqmm FRLS armoured copper cable on ceiling / wall as per IS. 7098 /
Part-I / 1988
a) Labour including
charges : all taxes etc., complete.
Skilled Electrician. 1.00 day day 660.00 660.00
Lineman Electric / Telephone 1.50 day day 550.00 825.00
Helper (Electrical). 1.00 day day 550.00 550.00
Labour for 100 Mtr 2035.00
Labour for 1 Mtr 20.35
b) Material
2 Core x 1.5Sqmm FRLS armoured copper 1.00 Mtrs Mtrs 85.00 85.00
cable
Cost of Material for 1Metres 85.00
Total Cost of Material + Labour Charges 105.35
Add Contractors Profit 13.615% 14.34
119.69
Rate per Meter 120.00
FIRE EXTINGUISHERS
30 Supply & Fixing of 4.5Kg, CO2 Type Fire each 1 Nos 8395 8395
Extinguisher, Trolley Mounted, Easy Weight
Management, Used Unused
Mechanism, Squeeze Grip, Gross Weight 19.1
Kg, Empty Weight 14.6 Kg, Can Height 860MM,
Diameter 140MM,
Discharge time minimum 13 Secs, Controllable
discharge mechanism, Range minimum 2
Meters, Applicable on Class
B,C & electrically started Fire, B Rating 13B,
Can Construction : Hot Spinning / Forging,
Valve Construction : Forging &
Machining, Internal Coating of Can : Not
Applicable, External Coating of Can : Spray
Painting, Sheet metal thickness :
4.5MM, ISI & CE Approved, 2 Year Warranty
Including transportation, all taxes and all labour
charges etc
complete. Makes : Safex / Kenex / Bharat /
Reliance
32 Supply and fixing of ABC Powder MAP 2 Kg each 1 Nos 2990 2990
Fire extinguisher Mono ammonium phosphate
power 90, stored pressure
type, IS 15683 : 2006, pressure gauge gross wt.
3.6 kg, empty wt. 1.6 kg, can Ht.344mm,
Diameter 108mm, Discharge
time less than 8 sec, controllable discharge
mechanism, range min. 2 mts applicable on
classes A,B, C electrically
started fires, A- rating 2A, B-rating 21B, can
construction: Deep drawn Co2 mig welding, wall
construction: Forging &
Machining, internal coating of can: Epoxy power
coating, External coating of Can:Epoxy polyster
powder coating, sheet
metal thickness:1.60mm, Helium leakage
detection tested, insta - alert, ISI & CE approved
with 5 years warranty Including
transportation, all taxes and all labour charges
etc complete.
Makes : Safex / Kenex / Bharat / Reliance
13.615% 1534
12804.00
34 Supply and fixing of Escape signage boards in each 1 Nos 1334 1334
Rigid Photo luminecent based glow in Dark rigid
sheet with high intensity luminous properties
with specificaiton of Cease Fire or its equivalent
make Model-1ES01
35 Supply, Transportation, laying, testing & commissioning following of 'B' class heavy duty MS pipe
conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,
gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with
two or more coats of synthetic enamel paint of required shade complete as required
Makes : Jindal / Hissar / Tata pipes
a) 150 mm dia each 1 Nos 2346 2346
Contractor Profit 13.615% 319
Rate Per Each 2665.00
36 Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat
duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes
a as
150required.
mm dia each 1 Nos 6270 6270
Contractor Profit 13.615% 854
Rate Per Each 7124.00
37 Providing, installation, testing and commissioning of dual plate non - return valve of following sizes
confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required
a Makes:
150 mmAudco
dia / Kirloskar / BDK / H-Shankar / Leader/eachZolotto / Intervalve
1 / Nos
Honeywell.
9856 9856
Contractor Profit 13.615% 1342
40 Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat
duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes
a as
150required.
mm dia Makes: Audco / Kirloskar / BDK / H-Shankareach/ Leader/ Zolotto
1 /Nos
Intervalve / Honeywell.
6270 6270
151 mm dia 13.615% 854
152 mm dia 7124.00
42 Providing, installation, testing and commissioning of dual plate non - return valve of following sizes
confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required
a Makes:
150 mmAudco
dia / Kirloskar / BDK / H-Shankar / Leader/eachZolotto / Intervalve
1 / Nos
Honeywell.
9856 9856
Contractor Profit 13.615% 1342
Rate Per Each 11198.00
44 Supply, Transportation, installation , testing and commissioning of electric driven main fire pump
suitable for automatic operation and consisting of following : complete in all respect as required.a)
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with
stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and
farthest outlet at specified flow of ----- lpm at----- Mtr. head conforming to IS 1520b) Suitable HP SQ
cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3
phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.d) Suitable cement concrete foundation duly plastered with anti
vibration pads.Makes of Pumps: Kirloskar / Mather&Platt.Makes of Motors: Siemens/ ABB/ Kirloskar
45 Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for
automatic operation and consisting of following : complete in all respect as required
a) Horizontal
2280 LPM, 56type, multistage, centrifugal pump of cast
Mtr Head iron body & 1
each bronze Nos
impeller with stainless
646300 steel
646300
Contractor Profit 13.615% 87994
Rate Per Each 734294.00
46 Supplying , installation , testing and commissioning of electric driven pressurisation / Jockey pump
suitable for automatic operation and consisting of following : complete in all respect as required
a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel
shaft, mechanical seal and flow of 180 lpm at 70 Mtr head conforming to IS 1520
b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz.
AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation,
conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
d)
180Suitable
LPM, 56 cement concrete foundation duly plastered with anti vibration
Mtr Head 1 pads.
Nos 61870 61870
Makes of Pumps
Contractor Profit : Kirloskar / Mather&Platt. 13.615% 8424
Makes
Rate Perof Each
Motors : Siemens/ ABB/ Kirloskar 70294.00
48 Supply and fixing of Pressure Switch in the MS each 1 Nos 2625 2625
pipe Line including connection etc as required.
Make : Danfoss / Indfoss
51 Supply and fixing Flow Switches in 150 mmdia Each 1 Each 7350 7350
MS pipe.
Makes : System Sensor / Switzer
13.615% 1001
8351.00
52 Supply and fixing air vessel made of 250 mm each 1 Nos 15750 15750
dia, 8 mm thick MS sheet, 1200mm in height
with air release valve on top and flanged
connection to riser, drain arrangement with
25mm dia Gun metal wheel valve, with required
accessories, pressure gauge and painting with
synthetic enamel paint of approved shade as
required.
54 Supply of 95 Sqmm 3.5 Core XLPE insulated, RMS 1 One 903 903.00
1100V grade armoured alluminium cable as per Rmt
specification confirming to IS:7098
Makes : Torrent / Unicab / Universal /
Polycab / Havells / Gloster / KEI / Finolex /
Payal / RR kable / Finecab / RPG / V - Guard.
Public Addressable
57 Supply, Installation, Testing and Commissioning each 1 Nos 3080 3080
of 15 W Sound Column etc., complete with
connection.
Make : AHUZA / OMEGA or equivalent
Contractor Profit 13.615% 419
Rate Per Each 3499.00
Supplying and fixing 63mm dia, 15 mtr long RRL each 1.00 Nos 5630.00 5630.00
Hose Pipe with 63mm dia Male and Female
Gun metal / SS couplings duly binded with GI
wire, rivets etc conforming to IS 636 (Type -A)
as required. Make: Mini Max / Safex / Newage /
Winco / Padmini.
10.7.23 a)
Supply and fixing 63mm dia Gun metal branch each 1 Nos 2420 2420
pipe with 20mm (Nominal internal diameter)
size Gun metal / SS nozzle conforming to IS
903, suitable for instantaneous connection to
interconnect hose pipe coupling as required
10.7.27
80 mm dia. GIDF stand pipe (1 mtr. below each 2.00 Nos 1164.00 2328.00
ground + 1 mtr. above ground
Supplying and wrapping the anticorrosive each 2.00 Nos 308.00 616.00
material for buried pipes with coating of Primer
and wrapping with 4 mm thick polymer corrosion
resistant tape as per IS : 10221 with 15 mm
overlap as per specificatios.
80mm nominal dia (C)(10.7.42)
1 RBR-FNDN-1- ( I-A-i ) In ordinary soils, up to 3.00 Mts depth below GL by Manual means:
Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical
specifications including setting out, construction of shoring and bracing, removal of stumps and other
deleterious material , dressing of sides and bottom as per Technical Specification 305 MoRD / 304
MoRTH and as directed by the departmental officer including protecting the existing utility services
wherever it is possible during the execution and taking all precautionary measures in the restricted
areas for laying sewer/water pipe lines including divertion of traffic and backfilling in trenches with
excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all
incidental and operational charges etc., complete for Pipe Line trenches by manual means.
Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of
MORT&H
In ordinary soils, by Manual means for Pipe line Trenches
i up to 3.00 Mts depth below GL out put 10.00 Cum
a) Labour
Mate 0 Nos. 550.00 1 Each 0.00
Mazdoor (Labour-Irrigation-Unskilled-Sn.3) 3.64 Nos. 520.00 1 Each 1892.80
1892.80
c&d) Overheads & Contractors Profit @ 13.615% 257.7
add extra for pipe line trenches @ 75% 1419.60
Cost for 240 cum = a+b+c+d 3570.10
Rate per cum = (a+b+c+d)/10 357.01
a Rate per 1 Cum excluding Dewatering Rs 357.01
b Rate per 1 Cum including Dewatering Rs 357.01
2 RBR-FNDN-1- (I-B-i) - In ordinary soils up to 3.00 Mts depth below GL by Mechanical means:
Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical
specifications including setting out, construction of shoring and bracing, removal of stumps and other
deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as
directed by the departmental officer including protecting the existing utility services wherever it is
possible during the execution and taking all precautionary measures in the restricted areas for laying
sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable
material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational
charges etc., complete for Pipe Lines by mechanical means.
67.00
Sn. Description Quantity Rate Unit Amount
3 RBR-FNDN-1- ( I-A-ii ) In ordinary soils, 3.00 Mts to 6.00Mts. depth below GL by Manual means:
Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical
specifications including setting out, construction of shoring and bracing, removal of stumps and other
deleterious material , dressing of sides and bottom as per Technical Specification 305 MoRD / 304
MoRTH and as directed by the departmental officer including protecting the existing utility services
wherever it is possible during the execution and taking all precautionary measures in the restricted
areas for laying sewer/water pipe lines including divertion of traffic and backfilling in trenches with
excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all
incidental and operational charges etc., complete for Pipe Line trenches by manual means.
Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of
MORT&H
In ordinary soils, by Manual means for Pipe line Trenches
i 3.00 Mts to 6.00 Mts. depth below GL out put 10.00 Cum
a) Labour
Mate ( Labour- R&B-S.N.71) 0 Nos. 550.00 1 Each 0.00
Mazdoor (Labour-Irrigation-Unskilled-Sn.3) 4.68 Nos. 520.00 1 Each 2433.60
2433.60
c&d) Overheads & Contractors Profit @ 13.615% 331.33
add extra for pipe line trenches @ 75% 1825.20
Cost for 240 cum = a+b+c+d 4590.13
Rate per cum = (a+b+c+d)/10 459.01
Rate per 1 Cum excluding Dewatering Rs 459.01
Add extra for Dewatering @ 5% 5% 22.95
b Rate per 1 Cum including Dewatering Rs 481.96
4 RBR-FNDN-1- (I-B-ii) - In ordinary soils from 3.00 Mts to 6.00Mts depth below GL by
Mechanical means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings
and technical specifications including setting out, construction of shoring and bracing, removal of
stumps and other deleterious material , dressing of sides and bottom as per Technical Specification
304 MORTH and as directed by the departmental officer including protecting the existing utility
services wherever it is possible during the execution and taking all precautionary measures in the
restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches
with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all
incidental and operational charges etc., complete for Pipe Lines by mechanical means.
Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of
MORT&H
In ordinary soils, by Manual means for Pipe line Trenches
i Above 6.00 Mts. depth below GL out put 10.00 Cum
a) Labour
Mate ( Labour- R&B-S.N.71) 0 Nos. 550.00 1 Each 0.00
Mate ( Labour- R&B-S.N.71) 6.24 Nos. 520.00 1 Each 3244.80
3244.80
c&d) Overheads & Contractors Profit @ 13.615% 441.78
add extra for pipe line trenches @ 75% 2433.60
Cost for 240 cum = a+b+c+d 6120.18
Rate per cum = (a+b+c+d)/10 612.02
a Rate per 1 Cum excluding Dewatering Rs 612.02
Add extra for Dewatering @ 5% 5% 30.60
b Rate per 1 Cum including Dewatering Rs 642.62
6 RBR-FNDN-1- (I-B-iii) - In ordinary soils above 6.00Mts depth below GL by Mechanical means:
Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical
specifications including setting out, construction of shoring and bracing, removal of stumps and other
deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as
directed by the departmental officer including protecting the existing utility services wherever it is
possible during the execution and taking all precautionary measures in the restricted areas for laying
sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable
material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational
charges etc., complete for Pipe Lines by mechanical means.
8 RBR-FNDN-1- (II-B) - Ordinary rock (not requiring blasting) -up to 3.00Mts. below GL by
Machanical means: Excavation in Ordinary Rock for Pipe line trenches as per drawings and technical
specifications including setting out, construction of shoring and bracing, removal of stumps and other
deleterious material , dressing of sides and bottom as per Technical Specification 305 MoRD / 304
MoRTH and as directed by the departmental officer including protecting the existing utility services
wherever it is possible during the execution and taking all precautionary measures in the restricted
areas for laying sewer/water pipe lines including divertion of traffic and disposal of rock upto a lead
of 50 m, including all incidental and operational charges etc., complete for Pipe Line trenches by
machanical means.
Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of
MORT&H
Ordinary Soils : for Sumps, Thrust Blocks and Man Holes etc,.
up to 3.00 Mts depth below GL out put 10.00 Cum
a) Labour
Mate 0 Nos. 550.00 1 Each 0.00
Mazdoor (Labour-Irrigation-Unskilled-Sn.3) 3.64 Nos. 520.00 1 Each 1892.80
Sub total 1892.80
c&d) Overheads & Contractors Profit 0.13615 257.7
Cost for 240 cum = a+b+c+d 2150.50
Rate per cum = (a+b+c+d)/10 215.05
a Rate per 1 Cum excluding Dewatering Rs 215.05
Add extra for Dewatering @ 5% 5% 10.75
b Rate per 1 Cum including Dewatering Rs 225.80
10 RBR-FNDN-1-A-ii -manual means : Earthwork excavation for structures in all types of soils from
3.00 Mts to 6.00Mts. depth below GL by manual means as per drawing and technical specifications
including setting out, construction of shoring and bracing, removal of stumps and other deleterious
material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with
excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. for Thrust
blocks, Chambers and Man Holes etc. by manual means,
Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of
MORT&H
Ordinary Soils : for Sumps, Thrust Blocks and Man Holes etc,.
from 3.00 Mts to 6.00Mts. depth below GL out put 10.00 Cum
a) Labour
Mate 0 Nos. 550.00 1 Each 0.00
Mazdoor (Labour-Irrigation-Unskilled-Sn.3) 4.68 Nos. 520.00 1 Each 2433.60
Sub total 2433.60
c&d) Overheads & Contractors Profit 13.615% 331.33
Cost for 240 cum = a+b+c+d 2764.93
Rate per cum = (a+b+c+d)/10 276.49
a Rate per 1 Cum excluding Dewatering Rs 276.49
Add extra for Dewatering @ 5% 5% 13.82
b Rate per 1 Cum including Dewatering Rs 290.31
11 RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications
Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other
deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in
trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - in
Ordinary soil - by Machanical means
1 Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves
(Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or
equivalent grade as per I.S.3896-part2- 1985 and subsequent revisions, wedge fully rubber lined with EPDM
food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to
face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves
should be with Electrostatic powder coating both inside and outside pocket less body
passage. Drilled as per requirement of the dept.using with Cast Steel excluding all taxes and transportation, etc.
complete ISI marked.
A PN 10.00
Transport
CED @ ST @ CP @
Dia in mm Basic Rate @ Sub- Total
0.00% 18.00% 10.00% 13.6150%
50 7360.00 0.00 0.00 0.00 1002.06 8362.06
100 12434.00 0.00 0.00 0.00 1692.89 14126.89
150 19577.00 0.00 0.00 0.00 2665.41 22242.41
3 Manufacture, supply and delivery of DI (Ductile Iron) Wafer Butterfly valves conforming
to IS 13095 (and its amendments). With hand lever below 150 mm, with Worm gear for
200 mm and above.
CED @ ST @ Transport CP @
Dia in mm Basic Rate Sub- Total
0.00% 18.00% 5.00% 13.615%
a 100 31090.00 0.00 0.00 1554.50 4444.55 37089.05
b 150 52206.00 0.00 0.00 2610.30 7463.24 62279.54
c 200 79170.00 0.00 0.00 3958.50 11317.95 94446.45
ed soft sealing gate valves
5 or GGG-50/SG-500/7 or
y rubber lined with EPDM
00% leak proof with face to
Total Rs.
8363.00
14127.00
22243.00
Total Rs.
9148.00
18823.00
25887.00
39239.00
g
r
Total Rs.
6056.00
7146.00
10046.00
17048.00
23131.00
ated with metallic, corrosion
on GGG-40/SG 400/15 or
evisions. All the inside and
Total Rs.
37090.00
62280.00
94447.00
DESIGN OF THRUST BLOCKS
SOLUTION :
Length of block = L m
Width of block B = 1.30 m
Height of block H = 0.90 m
As the resultant is to lie within the kern zone of the base of block, X should be either equal to
or greater than one third of base width
The resultant of the force 'R' would cut the base at distance of X from A such that
L*W*b - To*h
X =
W
b = 0.65 m
h = 0.35 m
As the resultant is to lie within the kern zone of the base of the block, X should be either
to or greater than 1/3 of the base width
Therefore X = B/3
= 0.433 m
To*h = 389 kg
W*b = 1963 kg
L = 0.86 m
B = 1.30
tct
D
0.90
To
tcs
tcb
A
b
X
SOLUTION :
Length of block = L m
Width of block B = 1.30 m
Height of block H = 0.90 m
As the resultant is to lie within the kern zone of the base of block, X should be either equal to
or greater than one third of base width
The resultant of the force 'R' would cut the base at distance of X from A such that
L*W*b - To*h
X =
W
b = 0.65 m
h = 0.35 m
As the resultant is to lie within the kern zone of the base of the block, X should be either
to or greater than 1/3 of the base width
Therefore X = B/3
= 0.433 m
W*B/3 = 1309 kg
To*h = 210 kg
W*b = 1963 kg
L = 0.77 m
tct
D
D
0.90
To
tcs
tcb
A
b
X
SOLUTION :
Length of block = L m
Width of block B = 1.30 m
Height of block H = 0.90 m
As the resultant is to lie within the kern zone of the base of block, X should be either equal to
or greater than one third of base width
The resultant of the force 'R' would cut the base at distance of X from A such that
L*W*b - To*h
X =
W
b = 0.65 m
h = 0.35 m
As the resultant is to lie within the kern zone of the base of the block, X should be either
to or greater than 1/3 of the base width
Therefore X = B/3
= 0.433 m
W*B/3 = 1309 kg
To*h = 107 kg
W*b = 1963 kg
L = 0.72 m
B = 1.30
tct
D
0.90
To
tcs
tcb
A
b
X
b X Ah To
D
kg/cm2
2.50 0.833
kg/cm2
kg/cm2
2 RATES OF HDPE PIPES 6Kg/Sqcm -PE -100 Grade
Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where
in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in
coil & above 90 mm dia stright length in6 M.)
Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where
in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in
coil & above 90 mm dia stright length in6 M.)
63 mm 0.063 3.80 4.40 4.10 0.05 0.72 148.0 137730 137730 148.00 20.15 0.00 0.00 168.15 148.00 168.15 99.400 267.55 268.00
75 mm 0.075 4.50 5.20 4.85 0.07 1.01 215.0 137730 137730 215.00 29.27 0.00 0.00 244.27 215.00 244.27 99.400 343.67 344.00
90 mm 0.090 5.40 6.20 5.80 0.08 1.45 301.0 137730 137730 301.00 40.98 0.00 0.00 341.98 301.00 341.98 99.400 441.38 442.00
110 mm 0.110 6.60 7.50 7.05 0.10 2.15 453.0 137730 137730 453.00 61.68 0.00 0.00 514.68 453.00 514.68 99.400 614.08 615.00
125 mm 0.125 7.50 8.50 8.00 0.11 2.77 582.0 137730 137730 582.00 79.24 0.00 0.00 661.24 582.00 661.24 99.400 760.64 761.00
140 mm 0.140 8.40 9.50 8.95 0.12 3.48 731.0 137730 137730 731.00 99.53 0.00 0.00 830.53 731.00 830.53 99.400 929.93 930.00
160 mm 0.160 9.60 10.80 10.20 0.14 4.53 958.0 137730 137730 958.00 130.43 0.00 0.00 1088.43 958.00 1088.43 99.400 1187.83 1188.00
180 mm 0.180 10.80 12.10 11.45 0.16 5.72 1203.0 137730 137730 1203.00 163.79 0.00 0.00 1366.79 1203.00 1366.79 99.400 1466.19 1467.00
200 mm 0.200 12.00 13.40 12.70 0.17 7.05 1489.0 137730 137730 1489.00 202.73 0.00 0.00 1691.73 1489.00 1691.73 99.400 1791.13 1792.00
1 Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials
with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including
all labour charges , overheads & contractor profit etc., complete.
a) Brick masonry
(BLD-CSTN-14-9/299)
Mazdoor(unskilled) 0.409 Nos. 520.00 1 Each 212.68
Add for MA @ 20% 0.20 212.68 42.54
Rate per 1 cum 255.22
Overheads & Contractors Profit @
13.615% 0.13615 255.22 34.75
Rate per 1 cum Total Rs. 289.96
Rate per 1 cum Or Say 290.00
c) Clean removal of lime plaster from walls and raking out joints 20mm deep or from terraced roof and raking
out joints 100 mm deep
m) Clean removal of cement plaster from walls and raking out joint 20 mm deep
(BLD-CSTN-14-11)
a) Not exceeding 3 sqm in area :
Details of cost per each :
2nd class mason 0.10 Nos. 550.00 1 No. 55.00
Mazdoor(Male) 0.20 Nos. 520.00 1 No. 104.00
2nd class Blacksmith 0.05 Nos. 550.00 1 No. 27.50
Add for MA @ 20% 0.20 186.50 37.30
223.80
Overheads & Contractors Profit @ 0.13615 223.80 30.47
13.615%
Cost per each Total Rs. 254.27
Say 254.00
3 Removal of WCs, Urinals & Wash basins disposal of unserviceable materials with 100m lead as directed by
Executive Engineer duly taking actual premeasurements before dismantling including all labour charges etc.,
complete.
Unit = Each
Details of cost per each :
50% of Rate as taken as per SSR TBSP- 0.30 185.00 1 No. 55.50
E.VIII-
06
Add for MA @ 20% 0.20 55.50 1 No. 11.10
66.60
Overheads & Contractors Profit @ 0.13615 9.07
66.60
13.615%
Rate for Each 75.67
Say 76
4 Conveyance of dismantled concrete/ debris to a distance of 20 KM for disposal including hire charges of T & P,
labour charges etc., and overheads & contractors profit complete for finished item of work.
Labour , lift charges for scaffolding 9.43 13.56 17.69 21.82 25.96 30.09
Add for MA @ 20% 1.89 2.71 3.54 4.36 5.19 6.02
Rate per 1 sqm 12.49 17.44 22.40 27.35 32.32 37.28
Overheads & Contractors Profit @ 1.7 2.37 3.05 3.72 4.4 5.08
13.615%
Rate per 1 sqm 14.19 19.81 25.45 31.07 36.72 42.36
Or Say 14 20 25 31 37 42
5 Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in
ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLD-CSTN-2-1)
Ordinary Soil - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 Cum
a) Labour
Mazdoor ( Unskilled) 3.64 Nos. 520.00 1 No. 1892.80
Add for MA @ 20% 0.20 1892.80 378.56
b&c) 2271.36
Overheads & Contractors Profit @ 0.13615 2271.36 309.25
13.615%
Cost for 10 cum ( a+b+c) 2580.61
Rate per cum (a+b+c) / 10 Total Rs. 258.06
Rate per 1 cum Or Say 258.00
Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump,
compound
(BLD-CSTN-2-1&wall inCOM-LDLFT-6-66)
ordinary soils and depositing on bank with an initial lead of 10m and 1m
Rate with initial lead & lift 1.00 cum 258.06 1 cum 258.06
Mazdoor for extra lift ( 1 No. for 60m) 0.02 Nos. 520.00 1 Each 10.40
Add for MA @ 20% 0.20 10.40 2.08
Overheads & Contractors Profit @ 0.13615 12.48 1.70
13.615%
Rate per 1 cum Total Rs. 272.24
Or Say 272.00
(BLKD-CSTN-2-2)
Ordinary Soil - Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 240.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 520.00 1 No. 4326.40
Add for MA @ 20% 0.20 4326.40 865.28
b) Machinery
Shovel 0.85 cum 110hp (Part I (I&CAD
Works)) 6.00 hours 3185.70 1 Hour 19114.20
Crew charges (Part I (I&CAD Works)) 6.00 hours 317.20 1 Hour 1903.20
Add MA on crew charges 0.20 1903.20 380.64
c&d) 26589.72
Overheads & Contractors Profit @
13.615% 0.13615 26589.72 3620.19
Cost for 240 cum ( a+b+c+d) 30209.91
Rate per 1 cum (a+b+c+d) / 240 Total Rs. 125.87
Or Say 126.00
7 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on
bank for all lifts and with an initial lead of 10m and 3m to 6m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished
item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-3)
Ordinary Soil - Mechanical Means up to 3m to 6m depth
Unit : 1 cum
Taking output : 210.00 Cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 520.00 1 No. 4326.40
Add for MA @ 20% 0.20 4326.40 865.28
b) Machinery
Shovel 0.85 cum 110hp (Part I (I&CAD 6.00 hours 3185.70 1 Hour 19114.20
Works))
Crew charges (Part I (I&CAD Works)) 6.00 hours 317.20 1 Hour 1903.20
(BLD-CSTN-2-4)
Ordinary rock(not requiring blasting) - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 520.00 1 No. 2704.00
Add for MA @ 20% 0.20 2704.00 540.80
(b & c) 3244.80
Overheads & Contractors Profit @ 0.13615 3244.80 441.78
13.615%
Cost for 10 cum ( a+b+c) 3686.58
Rate per 1 cum (a+b+c) / 10 Total Rs. 368.66
Rate per 1 cum Or Say 369.00
9 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring
blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-5)
Ordinary rock (not requiring blasting)- Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 180.00 Cum
a) Labour
Mazdoor ( Unskilled) 6.24 Nos. 520.00 1 No. 3244.80
Add for MA @ 20% 0.20 3244.80 648.96
b) Machinery
Shovel 0.85 cum 110hp (Part I (I&CAD
Works)) 6.00 hours 3185.70 1 Hour 19114.20
Crew charges (Part I (I&CAD Works))
6.00 hours 317.20 1 Hour 1903.20
Add MA on crew charges 0.20 1903.20 380.64
c&d) 25291.80
Overheads & Contractors Profit @
13.615% 0.13615 25291.80 3443.48
Cost for 180 cum ( a+b+c+d) 28735.28
Rate per 1 cum (a+b+c+d) / 180 Total Rs. 159.64
Rate per 1 cum Or Say 160.00
13 Pre construction Anti termite treatment is a process in which chemical toxic to sub terrain termites is apply/
inject into soil during early stage of building Construction Treatment of soil Beneath the building and around the
foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered
termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates &
impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply
emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the columns , plinth beams
(Back filling) walls and floor junction, external perimeters, along retaining wall @ 5.0 Liters/Sqm of the horizontal
surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at
expansion joints. The substructure of a depth of 500mm around columns & 300mm deep around plinth beams,
basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all
materials to the site, cost of labour for spraying, rodding etc. complete for furnished item of work as per the approval
of the Engineer-in-charge(Plinth area measurements will be taken for payment).
14 Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not
exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all
peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for
fnished item of work (APSS NO.309&310)
(BLD-CSTN-2-9)
& Amendments/Modifications
in SoR 2021-22
Unit : 1 cum
Ordinary Soils (either excavated or
carted) - MANUAL MEANS
Taking output = 10 cum
a) Material :
Gravel (RMR Rate) 10.00 cum 245.31 1 cum 2453.10
b) Labour
Mate (Crowbar man / Jumper man) 0.20 Nos. 550.00 1 No. 110.00
Mazdoor ( Unskilled ) 2.50 Nos. 520.00 1 No. 1300.00
Bhisti 0.20 Nos. 550.00 1 No. 110.00
Add for MA @ 20% 0.20 1520.00 304.00
Water charges @ 1% 0.01 4277.10 42.77
Rate per 10 cum 4319.87
Overheads & Contractors Profit @ 0.13615 4319.87 588.15
13.615%
Rate per 10 cum 4908.02
Rate per 1 cum Total Rs. 490.80
Or Say 491.00
16 Filling with useful available excavated earth by manual means (excluding rock) in trenches, sides of foundations
and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and
ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire
charges of T & P etc., and overheads & contractors profit complete for finished item of work. (APSS NO. 309 & 310)
(BLD-CSTN-3-5)
Unit : 1 cum
A.MATERIALS :
Cement 162.00 Kgs 5200.00 1000 Kgs 842.40
Coarse aggregate 40mm 0.90 Cum 1465.87 1 Cum 1319.28
Fine aggregate ( Sand ) 0.45 Cum 692.50 1 Cum 311.63
Water (including curing) 1.20 kl 108.00 1 kl 129.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1.00 hour 192.90 1 hour 192.90
capacity
Crew charges 1.00 hour 302.90 1 hour 302.90
Add MA on crew charges 0.20 302.90 60.58
C.LABOUR :
1st class mason 0.10 Nos. 580.00 1 Each 58.00
Mazdoor (unskilled) 1.39 Nos. 520.00 1 Each 722.80
Add for MA @ 20% 0.20 780.80 156.16
4096.25
Overheads & Contractors Profit @ 0.13615 4096.25 557.70
13.615%
Rate per 1 cum Total Rs. 4653.95
Or Say 4654.00
18 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring
bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and
conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all
materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed,
ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402).
Unit : 1 cum
A.MATERIALS :
Cement 129.60 Kgs 5200.00 1000 Kgs 673.92
Coarse aggregate 40mm 0.90 Cum 1465.87 1 Cum 1319.28
Fine aggregate ( Sand ) 0.45 Cum 692.50 1 Cum 311.63
Water (including curing) 1.20 kl 108.00 1 kl 129.60
B. MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1.00 hour 192.90 1 hour 192.90
capacity
Crew charges 1.00 hour 302.90 1 hour 302.90
Add MA on crew charges 0.20 302.90 60.58
C. LABOUR :
1st class mason 0.10 Nos. 580.00 1 Each 58.00
Mazdoor (unskilled) 1.39 Nos. 520.00 1 Each 722.80
Add for MA @ 20% 0.20 780.80 156.16
3927.77
Overheads & Contractors Profit @ 0.13615 3927.77 534.77
13.615%
Rate per 1 cum Total Rs. 4462.53
Or Say 4463.00
( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 5200.00 1000 Kgs 308.88
Rough stone (OTG) 1.10 Cum 729.87 1 Cum 802.86
Fine aggregate(sand) 0.33 Cum 892.50 1 Cum 294.53
B) LABOUR
1st class mason 1.20 Nos. 580.00 1 Each 696.00
Mazdoor (unskilled) 2.00 Nos. 520.00 1 Each 1040.00
Add for MA @ 20% 0.20 1736.00 347.20
3489.46
Add water charges 0.01 3489.46 34.89
3524.36
Overheads & Contractors Profit @ 0.13615 3524.36 479.84
13.615%
Rate per 1 cum Total Rs. 4004.20
Or Say 4004.00
20 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted
from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc.,
from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size
and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for
finished item of work in foundation and basement. (APSS No. 601 & 615)
( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 5200.00 1000 Kgs 308.88
Rough stone (HBG) 1.10 Cum 825.87 1 Cum 908.46
Fine aggregate(sand) 0.33 Cum 892.50 1 Cum 294.53
B) LABOUR
1st class mason 1.20 Nos. 580.00 1 Each 696.00
Mazdoor (unskilled) 2.00 Nos. 520.00 1 Each 1040.00
Add for MA @ 20% 0.20 1736.00 347.20
3595.06
Add water charges 0.01 3595.06 35.95
3631.01
Overheads & Contractors Profit @ 0.13615 3631.01
13.615% 494.36
Rate per 1 cum Total Rs. 4125.37
Or Say 4125.00
21 Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal and
20mm graded machine crushed hard granite metal (coarse aggregate) in (2:1) ratio from approved quarry including
cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, sales &
other taxes except GST on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering
charges, overheads & contractors profit etc.,for finished item of work for footings and basement.
20 Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal (coarse
aggregate) in (2:1) ratio from approved quarry including cost and conveyance of all materials like cement, fine
aggregate (sand), coarse aggregate, water etc. to site, sales & other taxes on all materials, all charges for mixing,
laying concrete in position, curing charges, overheads & contractors profit etc., for finished item of work for Central
Median
23 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved
quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc.,
to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot
plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402).
(BLD-CSTN-3-14)
FOUNDATIONS , PLINTH , PEDESTALS ( Below Plinth)
A.MATERIALS :
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.133 Nos 580.00 1 Each 77.14
2nd class Mason 0.267 Nos 550.00 1 Each 146.85
Mazdoor (both men&women) 4.60 Nos 520.00 1 Each 2392.00
Add for MA @ 20% 0.20 2615.99 523.20
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 265.80 1 hour 354.31
Crew charges 1.333 hours 454.80 1 hour 606.25
Needle vibrator 40mm ( petrol ) 1.333 hours 36.50 1 hour 48.65
Crew charges 1.333 hours 218.00 1 hour 290.59
Add MA on crew charges 0.20 896.84 179.37
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 8283.26
b Column pedestals
Rate for Design mix M 25 1.00 Cum 8283.26 1 Cum 8283.26
Hire charges of centering and scaffolding 1.00 Cum 369.00 1 Cum 369.00
c Plinth Beams
Rate for Design mix M 25 1.00 Cum 8283.26 1 Cum 8283.26
Hire charges of centering and scaffolding 1.00 Cum 1566.00 1 Cum 1566.00
(BLD-CSTN-3-14)
FOUNDATIONS , PLINTH , PEDESTALS ( Below Plinth)
A.MATERIALS :
Cement 400.00 Kgs 5200.00 1000 Kgs 2080.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.133 Nos 580.00 1 Each 77.14
2nd class Mason 0.267 Nos 550.00 1 Each 146.85
Mazdoor (both men&women) 4.60 Nos 520.00 1 Each 2392.00
Add for MA @ 20% 0.20 2615.99 523.20
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 265.80 1 hour 354.31
Crew charges 1.333 hours 454.80 1 hour 606.25
Needle vibrator 40mm ( petrol ) 1.333 hours 36.50 1 hour 48.65
Crew charges 1.333 hours 218.00 1 hour 290.59
Add MA on crew charges 0.20 896.84 179.37
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 8387.26
a Footings
Rate for Design mix M 30 1.00 Cum 8387.26 1 Cum 8387.26
Hire charges of centering and scaffolding 1.00 Cum 325.00 1 Cum 325.00
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 400.00 Kgs 5200.00 1000 Kgs 2080.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.167 Nos 580.00 1 Each 96.86
2nd class Mason 0.167 Nos 550.00 1 Each 91.85
Mazdoor (both men&women) 5.60 Nos 520.00 1 Each 2912.00
Add for MA @ 20% 0.20 3100.71 620.14
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 265.80 1 hour 354.31
Crew charges 1.333 hours 454.80 1 hour 606.25
Needle vibrator 40mm ( petrol ) 1.333 hours 36.50 1 hour 48.65
Crew charges 1.333 hours 218.00 1 hour 290.59
Add MA on crew charges 0.20 896.84 179.37
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 8968.92
COLUMNS :
a) un supported height up to 3.66 m
FF (GF) SF TF
(i) Lifting by Manual means
Rate for other Floors
Rate as above 8968.92 8968.92 8968.92
Hire charges of centering and scaffolding 400.00 400.00 400.00
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.167 Nos 580.00 1 Each 96.86
2nd class Mason 0.167 Nos 550.00 1 Each 91.85
Mazdoor (both men&women) 5.60 Nos 520.00 1 Each 2912.00
Add for MA @ 20% 0.20 3100.71 620.14
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 265.80 1 hour 354.31
Crew charges 1.333 hours 454.80 1 hour 606.25
Needle vibrator 40mm ( petrol ) 1.333 hours 36.50 1 hour 48.65
Crew charges 1.333 hours 218.00 1 hour 290.59
Add MA on crew charges 0.20 896.84 179.37
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 8864.92
COLUMNS :
a) un supported height up to 3.66 m
FF (GF) SF TF 4F 5F 6F
(i) Lifting by Manual means
Rate for other Floors
Rate as above 8864.92 8864.92 8864.92 8864.92 8864.92 8864.92
Hire charges of centering and scaffolding 267.00 267.00 267.00 267.00 267.00 267.00
Labour charges (SoR Pg 119) 2091.00 2300.00 2509.00 2718.00 2927.00 3137.00
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.167 Nos 580.00 1 Each 96.86
2nd class Mason 0.167 Nos 550.00 1 Each 91.85
Mazdoor (both men&women) 5.60 Nos 520.00 1 Each 2912.00
Add for MA @ 20% 0.20 3100.71 620.14
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 265.80 1 hour 354.31
Crew charges 1.333 hours 454.80 1 hour 606.25
Needle vibrator 40mm ( petrol ) 1.333 hours 36.50 1 hour 48.65
Crew charges 1.333 hours 218.00 1 hour 290.59
Add MA on crew charges 0.20 896.84 179.37
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 8864.92
Columns :
a) un supported height up to 3.66 m
(i) Lifting by Mechanical means
FF (G.F) SF TF 4F 5F 6F
Rate for other Floors
Rate as above 8864.92 8864.92 8864.92 8864.92 8864.92 8864.92
Hire charges of centering and scaffolding 400.00 400.00 400.00 400.00 400.00 400.00
25 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and sales & other taxes on all materials, Steel scaffolding pipes, jack Props, Steel Centering Plates,etc.,.,
including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete
mechanically, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and
its fabrication charges for finished item of work (APSS No. 402)
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.167 Nos 580.00 1 Each 96.86
2nd class Mason 0.167 Nos 550.00 1 Each 91.85
Mazdoor (both men&women) 5.60 Nos 520.00 1 Each 2912.00
Add for MA @ 20% 0.20 3100.71 620.14
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 265.80 1 hour 354.31
Crew charges 1.333 hours 454.80 1 hour 606.25
Needle vibrator 40mm ( petrol ) 1.333 hours 36.50 1 hour 48.65
Crew charges 1.333 hours 218.00 1 hour 290.59
Add MA on crew charges 0.20 896.84 179.37
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 8864.92
a) LINTELS :
(i) Lifting by Manual means FF (G.F) SF TF 4F 5F 6F
Rate for other Floors
Rate as above 8864.92 8864.92 8864.92 8864.92 8864.92 8864.92
Hire charges of centering and scaffolding 1330.00 1330.00 1330.00 1330.00 1330.00 1330.00
LINTELS : 7F 8F 9F
Rate as above 8864.92 8864.92 8864.92
Hire charges of centering and scaffolding 1330.00 1330.00 1330.00
Labour charges 3112.00 3307.00 3501.00
Add for MA @ 20% 622.40 661.40 700.20
Lift charges of materials (Manual) 1860.43 2170.50 2480.57
Add for MA @ 20% 372.09 434.10 496.11
Rate per 1 cum 16161.84 16767.92 17372.80
Overheads & Contractors Profit @ 2200.43 2282.95 2365.31
13.615%
Rate per 1 cum 18362.27 19050.87 19738.11
Or Say 18362 19051 19738
7F 8F 9F
Rate as above 1329.74 1329.74 1329.74
Hire charges of centering and scaffolding
1183.00 1183.00 1183.00
Lift charges of materials (Winch 35HP 113.58 121.15 128.73
Electric)
Crew charges 108.09 115.30 122.51
Add for MA @ 20% 21.62 23.06 24.50
Rate per 10 sqm 2756.03 2772.25 2788.47
Overheads & Contractors Profit @
13.615% 375.23 377.44 379.65
Rate per 1 sqm 3131.26 3149.69 3168.12
Or Say 3131 3150 3168
(BLD-CSTN-3-16)
RCC SLABS, BEAMS :
A.MATERIALS :
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.067 Nos 580.00 1 Each 38.86
2nd class Mason 0.133 Nos 550.00 1 Each 73.15
Mazdoor (both Men & Women) 3.077 Nos 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 265.80 1 hour 81.87
Crew charges 0.308 hours 454.80 1 hour 140.08
Needle vibrator 40mm ( petrol ) 0.308 hours 36.50 1 hour 11.24
Crew charges 0.308 hours 218.00 1 hour 67.14
Add MA on crew charges 0.20 207.22 41.44
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 6061.13
a) BEAMS :
i) un supported height up to 3.66 m
Lifting by Mechanical means
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as above 6061.13 6061.13 6061.13 6061.13 6061.13 6061.13
Hire charges of centering and scaffolding 2349.00 2349.00 2349.00 2349.00 2349.00 2349.00
Labour , lift charges for scaffolding 2291.00 2520.00 2749.00 2978.00 3207.00 3437.00
Add for MA @ 20% 458.20 504.00 549.80 595.60 641.40 687.40
Lift charges of materials 0.00 101.11 111.22 121.34 131.45 141.56
(Winch 35HP Electric)
Crew charges 96.23 105.85 115.47 125.09 134.72
Add for MA @ 20% 0.00 19.25 21.17 23.09 25.02 26.94
Rate for 1 cum 11159.33 11650.72 11947.17 12243.63 12540.09 12837.75
Overheads & Contractors Profit @ 1519.34 1586.25 1626.61 1666.97 1707.33 1747.86
13.615%
Rate per 1 cum 12678.67 13236.97 13573.78 13910.60 14247.42 14585.61
Or Say 12679 13237 13574 13911 14247 14586
Labour , lift charges for scaffolding 2672.68 2939.83 3206.98 3474.13 3741.29 4009.60
Add for MA @ 20% 534.54 587.97 641.40 694.83 748.26 801.92
Lift charges of materials 0.00 101.11 111.22 121.34 131.45 141.56
(Winch 35HP Electric)
Crew charges 96.23 105.85 115.47 125.09 134.72
Add for MA @ 20% 0.00 19.25 21.17 23.09 25.02 26.94
Rate for 1 cum 12008.69 12545.86 12888.10 13230.34 13572.58 13916.22
Overheads & Contractors Profit @ 1634.98 1708.12 1754.71 1801.31 1847.91 1894.69
13.615%
Rate per 1 cum 13643.67 14253.98 14642.81 15031.65 15420.49 15810.91
Or Say 13644 14254 14643 15032 15420 15811
a) BEAMS :
i) un supported height up to 4.88 m
Lifting by Mechanical means
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as above 6061.13 6061.13 6061.13 6061.13 6061.13 6061.13
Hire charges of centering and scaffolding 3131.97 3131.97 3131.97 3131.97 3131.97 3131.97
Labour , lift charges for scaffolding 3054.64 3359.97 3665.30 3970.63 4275.96 4582.62
Add for MA @ 20% 610.93 671.99 733.06 794.13 855.19 916.52
Lift charges of materials 0.00 101.11 111.22 121.34 131.45 141.56
(Winch 35HP Electric)
Crew charges 96.23 105.85 115.47 125.09 134.72
Add for MA @ 20% 0.00 19.25 21.17 23.09 25.02 26.94
Rate for 1 cum 12858.66 13441.64 13829.70 14217.75 14605.81 14995.46
Overheads & Contractors Profit @ 1750.71 1830.08 1882.91 1935.75 1988.58 2041.63
13.615%
Rate per 1 cum 14609.37 15271.72 15712.61 16153.50 16594.39 17037.09
Or Say 14609 15272 15713 16154 16594 17037
Labour , lift charges for scaffolding 260.00 286.00 312.00 338.00 364.00 390.00
Add for MA @ 20% 52.00 57.20 62.40 67.60 72.80 78.00
Lift charges of materials 0.00 12.64 13.90 15.17 16.43 17.69
(Winch 35HP Electric)
Crew charges 12.03 13.23 14.43 15.64 16.84
Add for MA @ 20% 0.00 2.41 2.65 2.89 3.13 3.37
Rate per 1 sqm 1335.64 1393.91 1427.82 1461.73 1495.64 1529.54
Overheads & Contractors Profit @ 181.85 189.78 194.4 199.01 203.63 208.25
13.615%
Rate per 1 sqm 1517.49 1583.69 1622.22 1660.74 1699.27 1737.79
Or Say 1517 1584 1622 1661 1699 1738
Labour , lift charges for scaffolding 303.32 333.65 363.98 394.31 424.64 454.97
Add for MA @ 20% 60.66 66.73 72.80 78.86 84.93 90.99
Lift charges of materials 0.00 12.64 13.90 15.17 16.43 17.69
(Winch 35HP Electric)
Crew charges 12.03 13.23 14.43 15.64 16.84
Add for MA @ 20% 0.00 2.41 2.65 2.89 3.13 3.37
Rate per 1 sqm 1431.94 1495.41 1534.51 1573.62 1612.72 1651.83
Overheads & Contractors Profit @ 194.96 203.6 208.92 214.25 219.57 224.9
13.615%
Rate per 1 sqm 1626.90 1699.01 1743.43 1787.87 1832.29 1876.73
Or Say 1627 1699 1743 1788 1832 1877
Labour , lift charges for scaffolding 346.66 381.33 416.00 450.66 485.33 519.99
Add for MA @ 20% 69.33 76.27 83.20 90.13 97.07 104.00
Lift charges of materials 0.00 12.64 13.90 15.17 16.43 17.69
(Winch 35HP Electric)
Crew charges 12.03 13.23 14.43 15.64 16.84
Add for MA @ 20% 0.00 2.41 2.65 2.89 3.13 3.37
Rate per 1 sqm 1528.30 1596.97 1641.28 1685.59 1729.89 1774.20
Overheads & Contractors Profit @ 208.08 217.43 223.46 229.49 235.53 241.56
13.615%
Rate per 1 sqm 1736.38 1814.40 1864.74 1915.08 1965.42 2015.76
Or Say 1736 1814 1865 1915 1965 2016
Lift charges for scaffolding 260.00 286.00 312.00 338.00 364.00 390.00
Add for MA @ 20% 52.00 57.20 62.40 67.60 72.80 78.00
Lift charges of materials 0.00 15.17 16.68 18.20 19.72 21.23
(Winch 35HP Electric)
Crew charges 0.00 14.43 15.88 17.32 18.76 20.21
Add for MA @ 20% 0.00 2.89 3.18 3.46 3.75 4.04
Rate per 1 sqm 1487.17 1550.86 1585.31 1619.76 1654.20 1688.65
Overheads & Contractors Profit @ 202.48 211.15 215.84 220.53 225.22 229.91
13.615%
Rate per 1 sqm 1689.65 1762.01 1801.15 1840.29 1879.42 1918.56
Or Say 1690 1762 1801 1840 1879 1919
Lift charges for scaffolding 303.32 333.65 363.98 394.31 424.64 454.97
Add for MA @ 20% 60.66 66.73 72.80 78.86 84.93 90.99
Lift charges of materials 0.00 15.17 16.68 18.20 19.72 21.23
(Winch 35HP Electric)
Crew charges 0.00 14.43 15.88 17.32 18.76 20.21
Add for MA @ 20% 0.00 2.89 3.18 3.46 3.75 4.04
Rate per 1 sqm 1583.46 1652.35 1692.00 1731.64 1771.29 1810.94
Overheads & Contractors Profit @ 215.59 224.97 230.37 235.76 241.16 246.56
13.615%
Rate per 1 sqm 1799.05 1877.32 1922.37 1967.40 2012.45 2057.50
Or Say 1799 1877 1922 1967 2012 2057
Lift charges for scaffolding 267.00 294.00 320.00 347.00 374.00 401.00
Add for MA @ 20% 53.40 58.80 64.00 69.40 74.80 80.20
Lift charges of materials 0.00 15.17 16.68 18.20 19.72 21.23
(Winch 35HP Electric)
Crew charges 0.00 14.43 15.88 17.32 18.76 20.21
Add for MA @ 20% 0.00 2.89 3.18 3.46 3.75 4.04
Rate per 1 sqm 1655.10 1719.99 1754.43 1790.08 1825.73 1861.38
Overheads & Contractors Profit @ 225.34 234.18 238.87 243.72 248.57 253.43
13.615%
Rate per 1 sqm 1880.44 1954.17 1993.30 2033.80 2074.30 2114.81
Or Say 1880 1954 1993 2034 2074 2115
Lift charges for scaffolding 311.48 342.98 373.31 404.81 436.31 467.81
Add for MA @ 20% 62.30 68.60 74.66 80.96 87.26 93.56
Lift charges of materials 0.00 15.17 16.68 18.20 19.72 21.23
(Winch 35HP Electric)
Crew charges 0.00 14.43 15.88 17.32 18.76 20.21
Add for MA @ 20% 0.00 2.89 3.18 3.46 3.75 4.04
Rate per 1 sqm 1754.13 1824.41 1864.06 1905.10 1946.15 1987.20
Overheads & Contractors Profit @ 238.82 248.39 253.79 259.38 264.97 270.56
13.615%
Rate per 1 sqm 1992.95 2072.80 2117.85 2164.48 2211.12 2257.76
Or Say 1993 2073 2118 2164 2211 2258
Lift charges for scaffolding 267.00 294.00 320.00 347.00 374.00 401.00
Add for MA @ 20% 53.40 58.80 64.00 69.40 74.80 80.20
Lift charges of materials 0.00 20.22 22.24 24.27 26.29 28.31
(Winch 35HP Electric)
Crew charges 0.00 19.25 21.17 23.09 25.02 26.94
Add for MA @ 20% 0.00 3.85 4.23 4.62 5.00 5.39
Rate per 1 sqm 1806.63 1882.34 1917.87 1954.61 1991.34 2028.07
Overheads & Contractors Profit @ 245.97 256.28 261.12 266.12 271.12 276.12
13.615%
Rate per 1 sqm 2052.60 2138.62 2178.99 2220.73 2262.46 2304.19
Or Say 2053 2139 2179 2221 2262 2304
1 Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement
content of400 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed
hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering
Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of
concrete mechanically, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of
steel and its fabrication charges for finished item of work (APSS No. 402).
(BLD-CSTN-3-16)
RCC SLABS, BEAMS :
A.MATERIALS :
Cement 400.00 Kgs 5200.00 1000 Kgs 2080.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.067 Nos 580.00 1 Each 38.86
2nd class Mason 0.133 Nos 550.00 1 Each 73.15
TSMSIDC-SURYAPET Civil Data 144 of 336
Sl. Description Rate Amount (in
Quantity Per Unit
No. (in Rs.) Rs.)
Mazdoor (both Men & Women) 3.077 Nos 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 265.80 1 hour 81.87
Crew charges 0.308 hours 454.80 1 hour 140.08
Needle vibrator 40mm ( petrol ) 0.308 hours 36.50 1 hour 11.24
Crew charges 0.308 hours 218.00 1 hour 67.14
Add MA on crew charges 0.20 207.22 41.44
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 6165.13
a) BEAMS :
i) un supported height up to 3.66 m
Lifting by Mechanical means
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as above 6165.13 6165.13 6165.13 6165.13 6165.13 6165.13
Hire charges of centering and scaffolding 2349.00 2349.00 2349.00 2349.00 2349.00 2349.00
Labour , lift charges for scaffolding 2291.00 2520.00 2749.00 2978.00 3207.00 3437.00
Add for MA @ 20% 458.20 504.00 549.80 595.60 641.40 687.40
Lift charges of materials 0.00 101.11 111.22 121.34 131.45 141.56
(Winch 35HP Electric)
Crew charges 96.23 105.85 115.47 125.09 134.72
Add for MA @ 20% 0.00 19.25 21.17 23.09 25.02 26.94
Rate for 1 cum 11263.33 11754.72 12051.17 12347.63 12644.09 12941.75
Overheads & Contractors Profit @ 1533.5 1600.4 1640.77 1681.13 1721.49 1762.02
13.615%
Rate per 1 cum 12796.83 13355.12 13691.94 14028.76 14365.58 14703.77
Or Say 12797 13355 13692 14029 14366 14704
c) Roof Slabs 75mm thick :
Rate for Design mix M 25 0.08 Cum 6165.13 1 Cum 462.38
un supported height up to 3.66 m Lifting by Mechanical
(i) means
Lifting by Mechanical means
Rate for other Floors FF (GL) SF TF 4F 5F 6F
Rate as above 462.38 462.38 462.38 462.38 462.38 462.38
Hire charges of centering and scaffolding 266.00 266.00 266.00 266.00 266.00 266.00
Lift charges for scaffolding 260.00 286.00 312.00 338.00 364.00 390.00
Add for MA @ 20% 52.00 57.20 62.40 67.60 72.80 78.00
Lift charges of materials 0.00 15.17 16.68 18.20 19.72 21.23
(Winch 35HP Electric)
Crew charges 0.00 14.43 15.88 17.32 18.76 20.21
Add for MA @ 20% 0.00 2.89 3.18 3.46 3.75 4.04
Rate per 1 sqm 1040.38 1104.07 1138.52 1172.97 1207.42 1241.87
Overheads & Contractors Profit @ 141.65 150.32 155.01 159.7 164.39 169.08
13.615%
Rate per 1 sqm 1182.03 1254.39 1293.53 1332.67 1371.81 1410.95
Or Say 1182 1254 1294 1333 1372 1411
Lift charges for scaffolding 260.00 286.00 312.00 338.00 364.00 390.00
Add for MA @ 20% 52.00 57.20 62.40 67.60 72.80 78.00
Lift charges of materials 0.00 15.17 16.68 18.20 19.72 21.23
(Winch 35HP Electric)
Crew charges 0.00 14.43 15.88 17.32 18.76 20.21
Add for MA @ 20% 0.00 2.89 3.18 3.46 3.75 4.04
Rate per 1 sqm 1502.77 1566.46 1600.91 1635.36 1669.80 1704.25
Overheads & Contractors Profit @ 204.6 213.27 217.96 222.65 227.34 232.03
13.615%
Rate per 1 sqm 1707.37 1779.73 1818.87 1858.01 1897.14 1936.28
Or Say 1707 1780 1819 1858 1897 1936
Roof Slabs 150mm thick Dome slab:
c)
Rate for Design mix M 25 0.15 Cum 6165.13 1 Cum 924.77
un supported height up to 3.66 m Lifting by Mechanical
(i) means
Lifting by Mechanical means
Rate for other Floors FF (GL) SF TF 4F 5F 6F
Rate as above 924.77 924.77 924.77 924.77 924.77 924.77
Centering charges - 31 b (6) of PH P.No. 1657.00 1657.00 1657.00 1657.00 1657.00 1657.00
381
Lift charges of materials 0.00 15.17 16.68 18.20 19.72 21.23
(Winch 35HP Electric)
Crew charges 0.00 14.43 15.88 17.32 18.76 20.21
Add for MA @ 20% 0.00 2.89 3.18 3.46 3.75 4.04
Rate per 1 sqm 2581.77 2614.26 2617.51 2620.76 2624.00 2627.25
Overheads & Contractors Profit @ 351.51 355.93 356.37 356.82 357.26 357.7
13.615%
Rate per 1 sqm 2933.28 2970.19 2973.88 2977.58 2981.26 2984.95
Or Say 2933 2970 2974 2978 2981 2985
(BLD-CSTN-3-16)
A.MATERIALS :
12mm HBG graded metal 0.80 Cum 1542.87 1 Cum 1234.30
Sand 0.40 Cum 692.50 1 Cum 277.00
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
Water ( including for curing ) 1.20 Kl 108.00 1 Kl 129.60
B.MACHINERY :
Batching plant 0.50 cum 0.308 hour 265.80 1 hour 81.87
Crew charges 0.308 hour 454.80 1 hour 140.08
Needle vibrator 40mm ( petrol ) 0.308 hours 36.50 1 hour 11.24
Crew charges 0.308 hours 218.00 1 hour 67.14
Add MA on crew charges 0.20 207.22 41.44
C.LABOUR :
1st class mason 0.067 Nos. 580.00 1 Each 38.86
2nd class mason 0.133 Nos. 550.00 1 Each 73.15
Mazdoor (Unskilled) 3.077 Nos. 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
Rate per 1 cum 6013.13
(BLD-CSTN-8-17)
Unit : 10sqm
A.MATERIALS :
Cement mortar 1:4 0.0230 Cum 2933.93 1 Cum 67.48
B. LABOUR
Mason 1st class 0.30 Nos. 580.00 1 Each 174.00
Mazdoor (unskiled) 0.35 Nos. 520.00 1 Each 182.00
Add for MA @ 20% 0.20 356.00 71.20
Add water charges 1% 0.01 494.68 4.95
Rate per 10 Sqm 499.63
Overheads & Contractors Profit @ 0.13615 499.63 68.02
13.615%
Cost for 10 metres long and 10 cm 567.65
wide band
Cost for 1 metres long and 10 cm wide 56.77
band
29 Ornamental borders by providing 20 mm thick raised bands of 230 mm wide in plain cement mortor bands in CM (1:4)
360 Kg, including cost and conveyence of all materials, labour charges and scaffolding etc., curing, overheads &
contractors profit etc., complete for finished item of work.
Cost for 1 metres long and 23 cm wide 130.56
band
Say RM 131
30 Ornamental borders by providing 20 mm thick raised bands of 100 mm wide in plain cement mortor bands in CM(1:4)
360 Kg ,including cost and conveyence of all materials, labour charges and scaffolding s etc., curing, overheads &
contractors profit etc., complete for finished item of work.
(BLD-CSTN-3-16)
RCC SLABS, BEAMS :
A.MATERIALS :
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.067 Nos 580.00 1 Each 38.86
2nd class Mason 0.133 Nos 550.00 1 Each 73.15
Mazdoor (both Men & Women) 3.077 Nos 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 265.80 1 hour 81.87
Crew charges 0.308 hours 454.80 1 hour 140.08
Needle vibrator 40mm ( petrol ) 0.308 hours 36.50 1 hour 11.24
Crew charges 0.308 hours 218.00 1 hour 67.14
Add MA on crew charges 0.20 207.22 41.44
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 6061.13
a) BEAMS :
un supported height up to 3.66m
(i) Lifting by Manual means
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as above 6061.13 6061.13 6061.13 6061.13 6061.13 6061.13
Hire charges of centering and scaffolding 1566.00 1566.00 1566.00 1566.00 1566.00 1566.00
Labour , lift charges for scaffolding 1753.00 1928.00 2104.00 2279.00 2454.00 2630.00
Add for MA @ 20% 350.60 385.60 420.80 455.80 490.80 526.00
Lift charges of materials (Manual) 0.00 171.21 342.41 513.62 684.82 856.03
Add for MA @ 20% 0.00 34.24 68.48 102.72 136.96 171.21
Rate for 1 cum 9730.73 10146.18 10562.82 10978.27 11393.72 11810.36
Overheads & Contractors Profit @ 1324.84 1381.4 1438.13 1494.69 1551.25 1607.98
13.615%
Rate per 1 cum 11055.57 11527.58 12000.95 12472.96 12944.97 13418.34
Or Say 11056 11528 12001 12473 12945 13418
Labour , lift charges for scaffolding 1753.00 1928.00 2104.00 2279.00 2454.00 2630.00
Add for MA @ 20% 350.60 385.60 420.80 455.80 490.80 526.00
Lift charges of materials 0.00 101.11 111.22 121.34 131.45 141.56
(Winch 35HP Electric)
Crew charges 96.23 105.85 115.47 125.09 134.72
Add for MA @ 20% 0.00 19.25 21.17 23.09 25.02 26.94
Rate for 1 cum 9730.73 10157.32 10390.17 10621.83 10853.49 11086.35
Overheads & Contractors Profit @ 1324.84 1382.92 1414.62 1446.16 1477.7 1509.41
13.615%
Rate per 1 cum 11055.57 11540.24 11804.79 12067.99 12331.19 12595.76
Or Say 11056 11540 11805 12068 12331 12596
BEAMS :
Rate for other Floors 7F 8F 9F
Rate as above 6061.13 6061.13 6061.13
Hire charges of centering and scaffolding 1566.00 1566.00 1566.00
RCC SLABS :
Roof Slabs 115mm thick : un
a) supported height up to 3.66 m
Rate for Design mix M 25 0.115 Cum 6061.13 1 Cum 697.03
Labour , lift charges for scaffolding 199.00 219.00 239.00 259.00 279.00 299.00
Add for MA @ 20% 39.80 43.80 47.80 51.80 55.80 59.80
Lift charges of materials (Manual) 0.00 19.69 39.38 59.07 78.75 98.44
Add for MA @ 20% 0.00 3.94 7.88 11.81 15.75 19.69
Rate per 1 sqm 1112.83 1160.46 1208.08 1255.71 1303.34 1350.96
Overheads & Contractors Profit @
13.615% 151.51 158 164.48 170.96 177.45 183.93
Rate per 1 sqm 1264.34 1318.46 1372.56 1426.67 1480.79 1534.89
Or Say 1264 1318 1373 1427 1481 1535
Labour , lift charges for scaffolding 199.00 219.00 239.00 259.00 279.00 299.00
Add for MA @ 20% 39.80 43.80 47.80 51.80 55.80 59.80
Lift charges of materials 0.00 11.63 12.79 13.95 15.12 16.28
(Winch 35HP Electric)
Crew charges 0.00 11.07 12.17 13.28 14.39 15.49
Add for MA @ 20% 0.00 2.33 2.56 2.79 3.02 3.26
Rate per 1 sqm 1112.83 1161.85 1188.35 1214.85 1241.36 1267.86
Overheads & Contractors Profit @ 151.51 158.19 161.79 165.4 169.01 172.62
13.615%
Rate per 1 sqm 1264.34 1320.04 1350.14 1380.25 1410.37 1440.48
Or Say 1264 1320 1350 1380 1410 1440
Labour , lift charges for scaffolding 199.00 219.00 239.00 259.00 279.00 299.00
Add for MA @ 20% 39.80 43.80 47.80 51.80 55.80 59.80
Lift charges of materials(Manual) 0.00 21.40 42.80 64.20 85.60 107.00
Add for MA @ 20% 0.00 4.28 8.56 12.84 17.12 21.40
Rate per 1 sqm 1173.44 1223.12 1272.80 1322.48 1372.16 1421.85
Overheads & Contractors Profit @ 159.76 166.53 173.29 180.06 186.82 193.58
13.615%
Rate per 1 sqm 1333.20 1389.65 1446.09 1502.54 1558.98 1615.43
Or Say 1333 1390 1446 1503 1559 1615
Labour , lift charges for scaffolding 199.00 219.00 239.00 259.00 279.00 299.00
Add for MA @ 20% 39.80 43.80 47.80 51.80 55.80 59.80
Lift charges of materials 0.00 12.64 13.90 15.17 16.43 17.69
(Winch 35HP Electric)
Crew charges 12.03 13.23 14.43 15.64 16.84
Add for MA @ 20% 0.00 2.41 2.65 2.89 3.13 3.37
Rate per 1 sqm 1173.44 1224.51 1251.22 1277.93 1304.64 1331.34
Overheads & Contractors Profit @ 159.76 166.72 170.35 173.99 177.63 181.26
13.615%
Rate per 1 sqm 1333.20 1391.23 1421.57 1451.92 1482.27 1512.60
Or Say 1333 1391 1422 1452 1482 1513
Lift charges for scaffolding 199.00 219.00 239.00 259.00 279.00 299.00
Add for MA @ 20% 39.80 43.80 47.80 51.80 55.80 59.80
Lift charges of materials(Manual) 0.00 25.68 51.36 77.04 102.72 128.40
Add for MA @ 20% 0.00 5.14 10.27 15.41 20.54 25.68
Rate per 1 sqm 1324.97 1379.79 1434.60 1489.42 1544.24 1599.05
Overheads & Contractors Profit @ 180.39 187.86 195.32 202.78 210.25 217.71
13.615%
Rate per 1 sqm 1505.36 1567.65 1629.92 1692.20 1754.49 1816.76
Or Say 1505 1568 1630 1692 1754 1817
Lift charges for scaffolding 199.00 219.00 239.00 259.00 279.00 299.00
Add for MA @ 20% 39.80 43.80 47.80 51.80 55.80 59.80
Lift charges of materials 0.00 15.17 16.68 18.20 19.72 21.23
(Winch 35HP Electric)
Crew charges 0.00 14.43 15.88 17.32 18.76 20.21
Add for MA @ 20% 0.00 2.89 3.18 3.46 3.75 4.04
Rate per 1 sqm 1324.97 1381.46 1408.71 1435.96 1463.20 1490.45
Overheads & Contractors Profit @ 180.39 188.09 191.8 195.51 199.22 202.93
13.615%
Rate per 1 sqm 1505.36 1569.55 1600.51 1631.47 1662.42 1693.38
Or Say 1505 1570 1601 1631 1662 1693
Labour , lift charges for scaffolding 204.00 224.00 245.00 265.00 286.00 306.00
Add for MA @ 20% 40.80 44.80 49.00 53.00 57.20 61.20
Lift charges of materials(Manual) 0.00 29.96 59.92 89.88 119.84 149.80
Add for MA @ 20% 0.00 5.99 11.98 17.98 23.97 29.96
Rate per 1 sqm 1488.50 1548.45 1609.60 1669.56 1730.71 1790.66
Overheads & Contractors Profit @ 202.66 210.82 219.15 227.31 235.64 243.8
13.615%
Rate per 1 sqm 1691.16 1759.27 1828.75 1896.87 1966.35 2034.46
Or Say 1691 1759 1829 1897 1966 2034
Labour , lift charges for scaffolding 204.00 224.00 245.00 265.00 286.00 306.00
Add for MA @ 20% 40.80 44.80 49.00 53.00 57.20 61.20
Lift charges of materials 0.00 17.69 19.46 21.23 23.00 24.77
(Winch 35HP Electric)
Crew charges 16.84 18.52 20.21 21.89 23.58
Add for MA @ 20% 0.00 3.37 3.70 4.04 4.38 4.72
Rate per 1 sqm 1488.50 1550.40 1579.39 1607.18 1636.17 1663.96
Overheads & Contractors Profit @ 202.66 211.09 215.03 218.82 222.76 226.55
13.615%
Rate per 1 sqm 1691.16 1761.49 1794.42 1826.00 1858.93 1890.51
Or Say 1691 1761 1794 1826 1859 1891
Labour , lift charges for scaffolding 204.00 224.00 245.00 265.00 286.00 306.00
Add for MA @ 20% 40.80 44.80 49.00 53.00 57.20 61.20
Lift charges of materials 0.00 0.00 0.00 0.00 0.00 0.00
(Winch 35HP Electric)
Crew charges 0.00 0.00 0.00 0.00 0.00
Add for MA @ 20% 0.00 0.00 0.00 0.00 0.00 0.00
Rate per 1 sqm 1488.50 1512.50 1537.70 1561.70 1586.90 1610.90
Overheads & Contractors Profit @ 202.66 205.93 209.36 212.63 216.06 219.32
13.615%
Rate per 1 sqm 1691.16 1718.43 1747.06 1774.33 1802.96 1830.22
Or Say 1691 1718 1747 1774 1803 1830
Labour , lift charges for scaffolding 204.00 224.00 245.00 265.00 286.00 306.00
Add for MA @ 20% 40.80 44.80 49.00 53.00 57.20 61.20
Lift charges of materials(Manual) 0.00 34.24 68.48 102.72 136.96 171.21
Add for MA @ 20% 0.00 6.85 13.70 20.54 27.39 34.24
Rate per 1 sqm 1640.03 1705.12 1771.40 1836.49 1902.78 1967.87
Overheads & Contractors Profit @ 223.29 232.15 241.18 250.04 259.06 267.93
13.615%
Rate per 1 sqm 1863.32 1937.27 2012.58 2086.53 2161.84 2235.80
Or Say 1863 1937 2013 2087 2162 2236
(BLD-CSTN-3-16)
RCC SLABS, BEAMS :
A.MATERIALS :
Cement 400.00 Kgs 5200.00 1000 Kgs 2080.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.067 Nos 580.00 1 Each 38.86
2nd class Mason 0.133 Nos 550.00 1 Each 73.15
Mazdoor (both Men & Women) 3.077 Nos 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 265.80 1 hour 81.87
Crew charges 0.308 hours 454.80 1 hour 140.08
Needle vibrator 40mm ( petrol ) 0.308 hours 36.50 1 hour 11.24
Crew charges 0.308 hours 218.00 1 hour 67.14
Add MA on crew charges 0.20 207.22 41.44
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 6165.13
Labour , lift charges for scaffolding 1753.00 1928.00 2104.00 2279.00 2454.00 2630.00
Add for MA @ 20% 350.60 385.60 420.80 455.80 490.80 526.00
Lift charges of materials (Manual) 0.00 171.21 342.41 513.62 684.82 856.03
Add for MA @ 20% 0.00 34.24 68.48 102.72 136.96 171.21
Rate for 1 cum 9730.73 10146.18 10562.82 10978.27 11393.72 11810.36
Overheads & Contractors Profit @ 1324.84 1381.4 1438.13 1494.69 1551.25 1607.98
13.615%
Rate per 1 cum 11055.57 11527.58 12000.95 12472.96 12944.97 13418.34
Or Say 11056 11528 12001 12473 12945 13418
(BLD-CSTN-3-16)
RCC SLABS, BEAMS :
A.MATERIALS :
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.067 Nos 580.00 1 Each 38.86
2nd class Mason 0.133 Nos 550.00 1 Each 73.15
Mazdoor (both Men & Women) 3.077 Nos 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 265.80 1 hour 81.87
Crew charges 0.308 hours 454.80 1 hour 140.08
Needle vibrator 40mm ( petrol ) 0.308 hours 36.50 1 hour 11.24
Crew charges 0.308 hours 218.00 1 hour 67.14
Add MA on crew charges 0.20 207.22 41.44
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 6061.13
Labour , lift charges for scaffolding 260.00 286.00 312.00 338.00 364.00 390.00
Add for MA @ 20% 52.00 57.20 62.40 67.60 72.80 78.00
Lift charges of materials 0.00 12.64 13.90 15.17 16.43 17.69
(Winch 35HP Electric)
Crew charges 12.03 13.23 14.43 15.64 16.84
Add for MA @ 20% 0.00 2.41 2.65 2.89 3.13 3.37
Rate per 1 sqm 1335.64 1393.91 1427.82 1461.73 1495.64 1529.54
Overheads & Contractors Profit @ 181.85 189.78 194.4 199.01 203.63 208.25
13.615%
Rate per 1 sqm 1517.49 1583.69 1622.22 1660.74 1699.27 1737.79
Or Say 1517 1584 1622 1661 1699 1738
(BLD-CSTN-3-16)
A.MATERIALS :
Cement 380.00 Kgs 5200.00 1000 Kgs 1976.00
20mm HBG graded metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.067 Nos 580.00 1 Each 38.86
2nd class Mason 0.133 Nos 550.00 1 Each 73.15
Mazdoor (both men&women) 3.077 Nos 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 265.80 1 hour 81.87
Crew charges 0.308 hours 454.80 1 hour 140.08
Add MA on crew charges 0.20 140.08 28.02
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Rate per 1 cum 5969.32
Labour , lift charges for scaffolding 179.40 197.40 215.40 233.40 251.40 269.40
Add for MA @ 20% 35.88 39.48 43.08 46.68 50.28 53.88
Lift charges of materials(Manual) 0.00 6.42 12.84 19.26 25.68 32.10
Add for MA @ 20% 0.00 1.28 2.57 3.85 5.14 6.42
Rate per 1 RM 596.93 626.23 655.54 684.84 714.15 743.45
Overheads & Contractors Profit @ 81.27 85.26 89.25 93.24 97.23 101.22
13.615%
Rate per 1 RM 678.20 711.49 744.79 778.08 811.38 844.67
Or Say 678 711 745 778 811 845
(BLD-CSTN-5-17)
Unit = 1 Cum
A.MATERIALS
No of blocks required for 110 Nos 32518.02 1000 Nos 3576.98
1 Cum of Masonry
Cement 24.00 Kgs 5200.00 1000 Kgs 124.80
Fine aggregate ( Sand ) 0.10 cu.m. 892.50 1 cu.m. 89.25
B .LABOUR
Mason 1st class 0.42 Nos. 580.00 1 Each 243.60
Mason 2nd class 0.92 Nos. 550.00 1 Each 506.00
Man Mazdoor 0.70 Nos. 520.00 1 Each 364.00
Woman Mazdoor 2.10 Nos. 520.00 1 Each 1092.00
Add for MA @ 20% 0.20 2205.60 441.12
water charges @ 1% 0.01 6437.75 64.38
Rate per 1 cum 6502.13
b) Superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 6502.13 6502.13 6502.13 6502.13 6502.13 6502.13
Hire charges for Access Scaffolding 51.82 51.82 51.82 51.82 51.82 51.82
Labour charges for scaffolding 419.07 602.71 786.36 970.00 1153.64 1337.29
Add for MA @ 20% 83.81 120.54 157.27 194.00 230.73 267.46
Lift charges ( Page 131 of Std. Data ) 0.00 220.56 441.12 661.68 882.24 1102.80
Add for MA @ 20% 0.00 44.11 88.22 132.34 176.45 220.56
7056.84 7541.88 8026.93 8511.97 8997.01 9482.06
Overheads & Contractors Profit @ 960.79 1026.83 1092.87 1158.90 1224.94 1290.98
13.615%
Rate per 1 cum 8017.63 8568.71 9119.80 9670.87 10221.95 10773.04
Or Say 8018 8569 9120 9671 10222 10773.00
(BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Flyash lime solid blocks TBSC-A.II-11 247 Nos. 14230.23 1000 Nos. 3514.87
Internal walls :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 650.24 650.24 650.24 650.24 650.24 650.24
Hire charges for Access Scaffolding 11.66 11.66 11.66 11.66 11.66 11.66
Labour charges for scaffolding 94.29 135.61 176.93 218.25 259.57 300.89
Add for MA @ 20% 18.86 27.12 35.39 43.65 51.91 60.18
Lift charges ( Page 131 of Std. Data ) 0.00 22.06 44.11 66.17 88.22 110.28
Add for MA @ 20% 0.00 4.41 8.82 13.23 17.64 22.06
Rate per 1 sqm 775.05 851.10 927.15 1003.20 1079.25 1155.30
Overheads & Contractors Profit @ 105.52 115.88 126.23 136.59 146.94 157.29
13.615%
Rate per 1 sqm 880.57 966.98 1053.38 1139.79 1226.19 1312.59
Or Say 881 967 1053 1140 1226 1313
Unit = 1 Cum
A.MATERIALS
No of blocks required for 37 Nos 106.00 1 Nos 3922.00
1 Cum of Masonry
Cement 24.00 Kgs 5200.00 1000 Kgs 124.80
Fine aggregate ( Sand ) 0.100 Cum 892.50 1 Cum 89.25
B .LABOUR
Mason 1st class 0.420 Nos. 580.00 1 Each 243.60
Mason 2nd class 0.920 Nos. 550.00 1 Each 506.00
Man Mazdoor 0.700 Nos. 520.00 1 Each 364.00
Women Mazdoor 2.100 Nos. 520.00 1 Each 1092.00
Add for MA @ 20% 0.20 2205.60 441.12
water charges @ 1% 0.01 6782.77 67.83
Rate per 1 cum 6850.60
b) Superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 6850.60 6850.60 6850.60 6850.60 6850.60 6850.60
Hire charges for Access Scaffolding 50.70 50.70 50.70 50.70 50.70 50.70
Labour charges for scaffolding 409.96 589.61 769.26 948.91 1128.57 1308.22
Add for MA @ 20% 81.99 117.92 153.85 189.78 225.71 261.64
Lift charges ( Page 131 of Std. Data ) 0.00 220.56 441.12 661.68 882.24 1102.80
Add for MA @ 20% 0.00 44.11 88.22 132.34 176.45 220.56
7393.25 7873.50 8353.75 8834.00 9314.27 9794.52
Overheads & Contractors Profit @ 1006.59 1071.98 1137.36 1202.75 1268.14 1333.52
13.615%
Rate per 1 cum 8399.84 8945.48 9491.11 10036.75 10582.41 11128.04
Or Say 8400 8945 9491 10037 10582 11128
Unit - 10sqm
A.MATERIALS :
Flyash lime solid blocks 84 Nos. 47.00 1 Nos. 3948.00
Cement 36.00 Kgs 5200.00 1000 Kgs 187.20
Fine aggregate ( Sand ) 0.100 cu.m. 892.50 1 cu.m. 89.25
B.LABOUR :
1st class mason 0.42 Nos. 580.00 1 Each 243.60
2nd class mason 0.92 Nos. 550.00 1 Each 506.00
Mazdoor (Unskilled) 2.80 Nos. 520.00 1 Each 1456.00
Add for MA @ 20% 0.20 2205.60 441.12
water charges @ 1% 0.01 6871.17 68.71
Rate per 10 sqm 6939.88
Rate per 1 sqm 693.99
Internal walls :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 693.99 693.99 693.99 693.99 693.99 693.99
Hire charges for Access Scaffolding 11.66 11.66 11.66 11.66 11.66 11.66
Labour charges for scaffolding 94.29 135.61 176.93 218.25 259.57 300.89
Add for MA @ 20% 18.86 27.12 35.39 43.65 51.91 60.18
Lift charges ( Page 131 of Std. Data ) 0.00 22.06 44.11 66.17 88.22 110.28
Add for MA @ 20% 0.00 4.41 8.82 13.23 17.64 22.06
Rate per 1 sqm 818.80 894.85 970.90 1046.95 1123.00 1199.05
Overheads & Contractors Profit @ 111.48 121.83 132.19 142.54 152.90 163.25
13.615%
Rate per 1 sqm 930.28 1016.68 1103.09 1189.49 1275.90 1362.30
Or Say 930 1017 1103 1189 1276 1362
Lift charges for scaffolding 392.00 431.20 470.40 509.60 548.80 588.00
Add for MA @ 20% 78.40 86.24 94.08 101.92 109.76 117.60
Lift charges ( Page 131 of Std. Data ) 0.00 78.08 156.16 234.24 312.32 390.40
Add for MA @ 20% 0.00 15.62 31.23 46.85 62.46 78.08
Rate per 1 cum 5063.55 5204.28 5345.02 5485.76 5626.49 5767.23
Overheads & Contractors Profit @ 689.40 708.56 727.72 746.89 766.05 785.21
13.615%
Rate per 1 cum 5752.95 5912.84 6072.74 6232.65 6392.54 6552.44
Or Say 5753 5913 6073 6233 6393 6552
(BLD-CSTN-3-11)
Unit : 1 cum
A.MATERIALS :
Cement 330.00 Kgs 5200.00 1000 Kgs 1716.00
20mm HBG graded metal 0.90 Cum 1602.87 1 Cum 1442.58
Fine aggregate ( Sand ) 0.45 Cum 692.50 1 Cum 311.63
Water (including curing) 1.20 kl 108.00 1 kl 129.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1.00 hour 192.90 1 hour 192.90
capacity
Crew charges 1.00 hour 302.90 1 hour 302.90
Add MA on crew charges 0.20 302.90 60.58
C.LABOUR :
1st class mason 0.10 Nos. 580.00 1 Each 58.00
Mazdoor (unskilled) 1.39 Nos. 520.00 1 Each 722.80
Add for MA @ 20% 0.20 780.80 156.16
5093.15
Overheads & Contractors Profit @ 0.13615 5093.15 693.43
13.615%
Rate per 1 cum 5786.58
Or Say Or Say 5787.00
35 Plain Cement Concrete M 20 design mix using Concrete Batching Plant, 20mm size hard granite machine crushed
graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 330 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like
cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering, shuttering, machine
mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc., complete for finished item of
work (APSS No. 402 & 403) for steps & Sheet Rock.
Lift charges for scaffolding 392.00 431.20 470.40 509.60 548.80 588.00
Add for MA @ 20% 78.40 86.24 94.08 101.92 109.76 117.60
Lift charges ( Page 131 of Std. Data ) 0.00 171.21 342.41 513.62 684.82 856.03
Add for MA @ 20% 0.00 34.24 68.48 102.72 136.96 171.21
Rate per 1 cum 6343.53 6596.02 6848.50 7100.99 7353.48 7605.96
Overheads & Contractors Profit @ 863.67 898.05 932.42 966.80 1001.18 1035.55
13.615%
Rate per 1 cum 7207.20 7494.07 7780.93 8067.79 8354.65 8641.51
Or Say 7207 7494 7781 8068 8355 8642
1 Plain Cement Concrete M 20 design mix using Concrete Batching Plant, 20mm size hard granite machine crushed
graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 330 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like
cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering, shuttering, machine
mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc., complete for finished item of
work (APSS No. 402 & 403) for Saucer drain
Lift charges for scaffolding 392.00 431.20 470.40 509.60 548.80 588.00
Add for MA @ 20% 78.40 86.24 94.08 101.92 109.76 117.60
Lift charges ( Page 131 of Std. Data ) 0.00 171.21 342.41 513.62 684.82 856.03
Add for MA @ 20% 0.00 34.24 68.48 102.72 136.96 171.21
Rate per 1 cum 6343.53 6596.02 6848.50 7100.99 7353.48 7605.96
Overheads & Contractors Profit @ 863.67 898.05 932.42 966.80 1001.18 1035.55
13.615%
Rate per 1 cum 7207.20 7494.07 7780.93 8067.79 8354.65 8641.51
Or Say 7207 7494 7781 8068 8355 8642
36 Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concrete using Concrete Batching Plant including cost and conveyance of
all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering,
shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for
finished item of work (APSS No. 402 & 403) for sill slabs.
(BLD-CSTN-3-13 - A)
A.MATERIALS :
Cement 350.00 Kgs 5200.00 1000 Kgs 1820.00
12mm HBG graded metal 0.80 Cum 1542.87 1 Cum 1234.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.133 Nos 580.00 1 Each 77.14
2nd class Mason 0.267 Nos 550.00 1 Each 146.85
Mazdoor (both men&women) 3.60 Nos 520.00 1 Each 1872.00
Add for MA @ 20% 0.20 2095.99 419.20
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 265.80 1 hour 81.87
Crew charges 0.308 hour 454.80 1 hour 140.08
Add MA on crew charges 0.20 140.08 28.02
Water (including for curing) 1.20 kl 108.00 1 kl 129.60
Basic cost per 1 cum 6226.04
Lift charges for scaffolding 392.00 431.20 470.40 509.60 548.80 588.00
Add for MA @ 20% 78.40 86.24 94.08 101.92 109.76 117.60
Lift charges ( Page 131 of Std. Data ) 0.00 209.60 419.20 628.80 838.40 1048.00
Add for MA @ 20% 0.00 41.92 83.84 125.76 167.68 209.60
Rate per 1 cum 6768.44 7067.00 7365.56 7664.12 7962.68 8261.24
Overheads & Contractors Profit @ 921.52 962.17 1002.82 1043.47 1084.12 1124.77
13.615%
Rate per 1 cum 7689.97 8029.18 8368.38 8707.59 9046.80 9386.01
Or Say 7690 8029 8368 8708 9047 9386
37 Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concrete using Concrete Batching Plant including cost and conveyance of
all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering,
shuttering, labour charges such as weigh batching, machine mixing, laying concrete, lift charges, curing etc., and
overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for platforms and shelves.
(BLD-CSTN-3-16)
A.MATERIALS :
Cement 350.00 Kgs 5200.00 1000 Kgs 1820.00
12mm HBG graded metal 0.80 Cum 1542.87 1 Cum 1234.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.067 Nos 580.00 1 Each 38.86
2nd class Mason 0.133 Nos 550.00 1 Each 73.15
Mazdoor (both Men & Women) 3.077 Nos 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 265.80 1 hour 81.87
Crew charges 0.308 hour 454.80 1 hour 140.08
Add MA on crew charges 0.20 140.08 28.02
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Basic cost per 1cum 5765.32
37 Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of
350 kgs. of cement per 1 cum of concrete using WEIGH BATCHER / MIXER including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering,
shuttering, labour charges such as weigh batching, machine mixing, laying concrete, lift charges, curing etc., and
overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for Platforms & Shelves
(BLD-CSTN-3-16)
A.MATERIALS :
Cement 350.00 Kgs 5200.00 1000 Kgs 1820.00
12mm HBG graded metal 0.80 Cum 1542.87 1 Cum 1234.30
Sand 0.40 Cum 692.50 1 Cum 277.00
B.LABOUR :
1st class Mason 0.067 Nos 580.00 1 Each 38.86
2nd class Mason 0.133 Nos 550.00 1 Each 73.15
Mazdoor (both Men & Women) 3.077 Nos 520.00 1 Each 1600.04
Add for MA @ 20% 0.20 1712.05 342.41
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 265.80 1 hour 81.87
Crew charges 0.308 hour 454.80 1 hour 140.08
Add MA on crew charges 0.20 140.08 28.02
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Basic cost per 1cum 5765.32
(BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 5200.00 1000 Kgs 137.28
Fine aggregate (Sand) 0.11 Cum 892.50 1 Cum 98.18
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5200.00 1000 Kgs 74.88
Fine aggregate (Sand) 0.04 Cum 892.50 1 Cum 35.70
B.LABOUR :
1st Class Mason 0.63 Nos. 580.00 1 Each 365.40
2nd Class Mason 1.47 Nos. 550.00 1 Each 808.50
Mazdoor (Unskilled) 3.90 Nos. 520.00 1 Each 2028.00
Add for MA @ 20% 0.20 3201.90 640.38
water charges @ 1% 0.01 4188.32 41.88
Rate per 10 Sqm 4230.20
Rate per 1 Sqm 423.02
41 Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of
4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand,
water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials
and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting
grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of
work. (SS 901,903 & 904).
Walls in superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 423.02 423.02 423.02 423.02 423.02 423.02
Hire charges for Access Scaffolding 1.17 1.17 1.17 1.17 1.17 1.17
Labour charges for scaffolding 9.43 13.56 17.69 21.82 25.96 30.09
Add for MA @ 20% 1.89 2.71 3.54 4.36 5.19 6.02
Lift charges (Page 131 of Std. Data) 0.00 32.02 64.04 96.06 128.08 160.10
Add for MA @ 20% 0.00 6.40 12.81 19.21 25.62 32.02
Rate per 1 Sqm 435.51 478.88 522.27 565.64 609.04 652.42
Overheads & Contractors Profit @ 59.29 65.20 71.11 77.01 82.92 88.83
13.615%
494.80 544.08 593.38 642.65 691.96 741.25
Or Say 495 544 593 643 692 741.00
42 Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials
like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental
charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by
Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)
(BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement 43.20 Kgs 5200.00 1000 Kgs 224.64
Fine aggregate ( Sand ) 0.15 cu.m. 892.50 1 cu.m. 133.88
B.LABOUR :
1st Class Mason 0.60 Nos. 580.00 1 Each 348.00
a) for basement :
Rate per 1 Sqm 1.00 sqm 138.89 1 sqm 138.89
Overheads & Contractors Profit @ 0.13615 138.89
13.615% 18.91
Rate per 1 Sqm 157.80
Say 158.00
b) Walls in superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 138.89 138.89 138.89 138.89 138.89 138.89
Hire charges for Access Scaffolding 1.17 1.17 1.17 1.17 1.17 1.17
Labour charges for scaffolding 9.43 13.56 17.69 21.82 25.96 30.09
Add for MA @ 20% 1.89 2.71 3.54 4.36 5.19 6.02
Lift charges ( Page 131 of Std. Data ) 0.00 8.47 16.94 25.42 33.89 42.36
Add for MA @ 20% 0.00 1.69 3.39 5.08 6.78 8.47
151.38 166.50 181.62 196.75 211.88 227.00
Overheads & Contractors Profit @ 20.61 22.67 24.73 26.79 28.85 30.91
13.615%
Rate per 1 Sqm 171.99 189.17 206.35 223.54 240.73 257.91
Or Say 172 189 206 224 241 258
(BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick
Cement 43.20 Kgs 5200.00 1000 Kgs 224.64
Fine aggregate (Sand) 0.18 Cum 892.50 1 Cum 160.65
Top coat in CM(1:4), 4mm thick
Cement 14.40 Kgs 5200.00 1000 Kgs 74.88
Fine aggregate (Sand) 0.04 Cum 892.50 1 Cum 35.70
B.LABOUR :
1st Class Mason 0.63 Nos. 580.00 1 Each 365.40
2nd Class Mason 1.47 Nos. 550.00 1 Each 808.50
Mazdoor (Unskilled) 3.90 Nos. 520.00 1 Each 2028.00
Add for MA @ 20% 0.20 3201.90 640.38
water charges @ 1% 0.01 4338.15 43.38
Rate per 10 Sqm 4381.53
Rate per 1 Sqm 438.15
Walls in superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 438.15 438.15 438.15 438.15 438.15 438.15
Hire charges for Access Scaffolding 1.17 1.17 1.17 1.17 1.17 1.17
Labour charges for scaffolding 9.43 13.56 17.69 21.82 25.96 30.09
Add for MA @ 20% 1.89 2.71 3.54 4.36 5.19 6.02
Lift charges ( Page 131 of Std. Data ) 0.00 32.02 64.04 96.06 128.08 160.10
Add for MA @ 20% 0.00 6.40 12.81 19.21 25.62 32.02
450.64 494.01 537.40 580.77 624.17 667.55
Overheads & Contractors Profit @ 61.35 67.26 73.17 79.07 84.98 90.89
13.615%
Rate per 1 Sqm 511.99 561.27 610.57 659.84 709.15 758.44
Or Say 512 561 611 660 709 758
(BLD-CSTN-8-8)
Unit : 10 sqm
A.MATERIALS :
Cement 60.48 Kgs 5200.00 1000 Kgs 314.50
Fine aggregate (Sand) 0.21 Cum 892.50 1 Cum 187.43
B.LABOUR :
2nd Class Mason 0.94 Nos. 550.00 1 Each 517.00
Mazdoor (Unskilled) 1.60 Nos. 520.00 1 Each 832.00
Add for MA @ 20% 0.20 1349.00 269.80
water charges @ 1% 0.01 2120.72 21.21
Rate per 10 Sqm 2141.93
Rate per 1 Sqm 214.19
a) for basement :
Rate per 1 Sqm 1.00 sqm 214.19 1 sqm 214.19
Overheads & Contractors Profit @ 0.13615 214.19
13.615% 29.16
Rate per 1 Sqm 243.35
Or Say Say 243.00
b) Walls in superstructure :
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 214.19 214.19 214.19 214.19 214.19 214.19
Hire charges for Access Scaffolding 1.17 1.17 1.17 1.17 1.17 1.17
Labour charges for scaffolding 9.43 13.56 17.69 21.82 25.96 30.09
Add for MA @ 20% 1.89 2.71 3.54 4.36 5.19 6.02
Lift charges ( Page 131 of Std. Data ) 0.00 13.49 26.98 40.47 53.96 67.45
Add for MA @ 20% 0.00 2.70 5.40 8.09 10.79 13.49
226.68 247.82 268.97 290.10 311.26 332.41
Overheads & Contractors Profit @ 30.86 33.74 36.62 39.50 42.38 45.26
13.615%
Rate per 1 Sqm 257.54 281.56 305.59 329.60 353.64 377.67
Or Say 258 282 306 330 354 378
(BLD-CSTN-10-25)
Unit : 10 sqm
A.MATERIALS :
Cement 100.80 Kgs 5200.00 1000 Kgs 524.16
Fine aggregate (Sand) 0.21 Cum 892.50 1 Cum 187.43
Integral cement waterproofing liquid 0.40 Ltrs 215.00 1.00 Ltrs 86.00
B.LABOUR :
1st Class Mason 0.66 Nos. 580.00 1 Each 382.80
2nd Class Mason 1.54 Nos. 550.00 1 Each 847.00
Mazdoor (Unskilled) 3.70 Nos. 520.00 1 Each 1924.00
Add for MA @ 20% 0.20 3153.80 630.76
water charges @ 1% 0.01 4582.15 45.82
Rate per 10 Sqm 4627.97
(BLD-CSTN-8-2)
A.MATERIALS :
Cement 72.00 Kgs 5200.00 1000 Kgs 374.40
Fine aggregate (Sand) 0.15 Cum 892.50 1 Cum 133.88
Integral cement waterproofing liquid 0.29 Ltrs 215.00 1.00 Ltrs 62.35
B.LABOUR :
1st Class Mason 0.60 Nos. 580.00 1 Each 348.00
Mazdoor (Unskilled) 0.96 Nos. 520.00 1 Each 499.20
Add for MA @ 20% 0.20 847.20 169.44
water charges @ 1% 0.01 1587.27 15.87
Rate per 10 Sqm 1603.14
(BLD-CSTN-8-11)
Unit : 10 sqm
A)MATERIALS
Rabbit wire mesh 13.30 sqm 22.00 1 sqm 292.60
Cement for base coat and plastering 120.00 Kgs 5200.00 1000 Kgs 624.00
Cement for lumps 50.00 Kgs 5200.00 1000 Kgs 260.00
Fine aggregate (Sand) 0.25 cu.m. 892.50 1 cu.m. 223.13
12mm plastering 2 coats in 1:6 & 1:4 21.80 sqm 423.02 1 sqm 9221.84
both sides
Excluding HYSD steel/mild steel &
binding wire
B) LABOUR CHARGES
1st Class Mason 8.00 Nos. 580.00 1 Each 4640.00
Operator concrete mixer 1.00 Nos. 615.00 1 Each 615.00
Mazdoor (Unskilled) 10.00 Nos. 520.00 1 Each 5200.00
Add for MA @ 20% 0.20 10455.00 2091.00
C)Machinery :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 2.00 hours 192.90 1 hours 385.80
capacity
Crew charges 2.00 hours 302.90 1 hours 605.80
Add MA on crew charges 0.20 302.90 121.16
water charges @ 1% 0.01 24280.32 242.80
Rate per 10 Sqm 24523.12
Rate per 1 Sqm 2452.31
46 Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick set over a base coat of CM (1:8) ,
12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of
all materials like cement, sand, water, flooring stones etc. complete including sales & other taxes on all materials
including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift
charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work.
(APSS No.703 & 701)
(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished shahabad stone 15 to 18mm 11.00 Sqm 2704.88 10 Sqm 2975.37
thick
Cement for CM (1:8) proportion for base 21.60 Kgs 5200.00 1000 Kgs 112.32
coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
Cement for pointing 20.00 Kgs 5200.00 1000 Kgs 104.00
Sand for CM(1:8) 0.12 Cum 892.50 1 Cum 107.10
B .LABOUR
Mason 1st class 3.10 Nos 580.00 1 Each 1798.00
Mason 2nd class 1.10 Nos 550.00 1 Each 605.00
Mazdoor(un skilled) 0.86 Nos 520.00 1 Each 447.20
Add for MA @ 20% 0.20 2850.20 570.04
Add water charges 1% 0.01 6890.63 68.91
Rate for 10 sqm 6959.53
(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished black Kadapa slabs minimum of 11.00 Sqm 1544.88 10 Sqm 1699.37
15mm thick
Cement for CM (1:8) proportion for base 21.60 Kgs 5200.00 1000 Kgs 112.32
coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
Cement for pointing 20.00 Kgs 5200.00 1000 Kgs 104.00
Sand for CM(1:8) 0.12 Cum 892.50 1 Cum 107.10
B .LABOUR
Mason 1st class 3.10 Nos 580.00 1 Each 1798.00
Mason 2nd class 1.10 Nos 550.00 1 Each 605.00
Mazdoor(un skilled) 0.86 Nos 520.00 1 Each 447.20
Add for MA @ 20% 0.20 2850.20 570.04
Add water charges 1% 0.01 5614.63 56.15
Rate for 10 sqm 5670.77
(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (300mm x 10.50 Sqm 315.00 1 Sqm 3307.50
300mm)
Cement for CM(1:8) proportion for base 21.60 Kgs 5200.00 1000 Kgs 112.32
coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White Cement 2.00 Kgs 34.00 1 Kg 68.00
Sand for CM(1:8) 0.12 Cum 892.50 1 Cum 107.10
B .LABOUR
Mason 1st class 0.96 Nos 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos 550.00 1 Each 1232.00
Mazdoor(un skilled) 3.30 Nos 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3504.80 700.96
Add water charges 1% 0.01 7972.28 79.72
Rate for 10sqm 8052.00
(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (300mm x 10.50 Sqm 315.00 1 Sqm 3307.50
300mm)
Cement for CM(1:8) proportion for base 21.60 Kgs 5200.00 1000 Kgs 112.32
coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
Providing and fixing flooring with full 10.50 SQM 340.00 1 Sqm 3570.00
depth jointing and pointing to the
Vitrified/ CeramicTile flooring in specified
thick for tiles of any sizes with epoxy
emulsion grout/ synthetic /resin adhesive
in width of 3-5 mm with Nylonspacers
excluding cost of tiles.
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Cost of Double charged vitrified tiles 10.50 sqm 578.00 1 Sqm 6069.00
TBSC-C.II-05
Cement for CM(1:8)proportion for base 21.60 Kgs 5200.00 1000 Kgs 112.32
coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White Cement 6.00 Kgs 34.00 1 Kg 204.00
Sand for CM(1:8) 0.12 Cum 892.50 1 Cum 107.10
B .LABOUR
Mason 1st class 0.96 Nos 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos 550.00 1 Each 1232.00
Mazdoor(un skilled) 3.30 Nos 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3504.80 700.96
Add water charges 1% 0.01 10869.78 108.70
Rate for 10sqm 10978.48
1 Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer
pigment of size 800 x 800 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630
(Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by
the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick
using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like
consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment
of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc.,
to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar,
laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707).
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8 to 10mm thick of size 10.50 Sqm 443.00 1 Sqm 4651.50
600mm x 600mm
Cement for CM(1:8)proportion for base 21.60 Kgs 5200.00 1000 Kgs 112.32
coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White Cement 6.00 Kgs 34.00 1 Kg 204.00
Sand for CM(1:8) 0.12 Cum 892.50 1 Cum 107.10
B .LABOUR
Mason 1st class 0.96 Nos 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos 550.00 1 Each 1232.00
Mazdoor(un skilled) 3.30 Nos 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3504.80 700.96
Add water charges 1% 0.01 9452.28 94.52
Rate for 10sqm 9546.80
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
digital / polished glazed full body 10.50 Sqm 800.00 1 Sqm 8400.00
porcelain vitrified tiles with any type of
design texture 9 to 11mm thick of size
900mm x 900mm TBSCC.II-09
Cement for CM(1:8)proportion for base 21.60 Kgs 5200.00 1000 Kgs 112.32
coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White Cement 6.00 Kgs 34.00 1 Kg 204.00
Sand for CM(1:8) 0.12 Cum 892.50 1 Cum 107.10
B .LABOUR
Mason 1st class 0.96 Nos 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos 550.00 1 Each 1232.00
Mazdoor(un skilled) 3.30 Nos 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3504.80 700.96
Add water charges 1% 0.01 13200.78 132.01
Rate for 10sqm 13332.79
7F 8F 9F
13332.79 13332.79 13332.79
2102.88 2453.36 2803.84
420.58 490.67 560.77
15856.24 16276.82 16697.40
2158.83 2216.09 2273.35
18015.07 18492.91 18970.75
1801.51 1849.29 1897.07
1802 1849 1897
51 Supply and fixing of Venetian blinds Vertical blinds 100 mm wide with all accessories including cost and conveynace
of materials, labour charges and overheads & contractor profit etc., for complete finished item of work.
A) Material requirement
multi-wall polycarbonate sheets 6.00 mm 1.00 Sqm 1340.00 1 Sqm 1340.00
thick TBSC-D.VI-20
Overheads & Contractors Profit @ 0.13615 1340.00 182.44
13.615%
Rate per 1 sqm 1522.44
Say 1522
54 Supplying and fixing Aluminium Universal glazing set 40mm wide for jointing and fixing Polycarbonate sheets
including cost and conveyance of all materials, labour charges, overheads and contractors profit etc., complete for
finished item of work.
55 Providing Plinth protection with a bed of 100mm thick PCC(1:5:10) using screened sand ,40mm size HB Granite metal
and on top of PCC, 20mm thick granolithic concrete flooring with CC(1:1:2) prop.using 6mm to 12mm size graded
hard granite machine crushed metal laid monolithically already laid, in alternate panels of size not exceeding 1.5 x 1.5
Mts. and providing 5mm thick glass strips between the pannels and finishing the top surface to required smoothness
and slopes including grooves, thread lining as directed by the Engineer - in - charge including cost and conveyance of
all materials to site and operational & incidental and labour charges like mixing of cement concrete, laying, curing, lift
charges etc., and overheads & contractors profit complete including cost of CC bed for finished item of work. (APSS
No.701 & 710).
(BLD-CSTN-9-9)
Unit = 10 sqm.
A. MATERIALS:
Granite stone tiles 8mm thick (mirror 10.50 Sqm 1182.00 1 Sqm 12411.00
polished of all shades)
Cement for CM(1:8) for base coat 21.60 Kgs 5200.00 1000 Kgs 112.32
Cement for slurry 33.00 Kgs 5200.00 1000 Kg 171.60
White Cement 6.00 Kgs 34.00 1 Kg 204.00
Sand for CM(1:8) 0.20 Cum 892.50 1 Cum 178.50
B .LABOUR
Mason 1st class 0.96 Nos 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos 550.00 1 Each 1232.00
Mazdoor(un skilled) 3.30 Nos 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3504.80 700.96
Add water charges 1% 0.01 17283.18 172.83
Rate for 10 sqm 17456.01
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs other than
black 16 to 18mm thick 10.50 Sqm 3030.00 1 Sqm 31815.00
Cement for CM(1:8) for base coat 36.00 Kgs 5200.00 1000 Kgs 187.20
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing 6.00 Kgs 34.00 1 Kg 204.00
Sand for CM(1:8) 0.20 Cum 892.50 1 Cum 178.50
B .LABOUR
Mason 1st class 3.00 Nos 580.00 1 Each 1740.00
Mason 2nd class 1.00 Nos 550.00 1 Each 550.00
Mazdoor(un skilled) 8.00 Nos 520.00 1 Each 4160.00
Add for MA @ 20% 0.20 6450.00 1290.00
Add water charges 1% 0.01 40296.30 402.96
Rate for 10sqm 40699.26
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to 10.50 Sqm 2576.00 1 Sqm 27048.00
18mm thick
Cement for CM(1:8) for base coat 36.00 Kgs 5200.00 1000 Kgs 187.20
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing 6.00 Kgs 34.00 1 Kg 204.00
Sand for CM(1:8) 0.20 Cum 892.50 1 Cum 178.50
B .LABOUR
Mason 1st class 3.00 Nos 580.00 1 Each 1740.00
Mason 2nd class 1.00 Nos 550.00 1 Each 550.00
Mazdoor(un skilled) 8.00 Nos 520.00 1 Each 4160.00
Add for MA @ 20% 0.20 6450.00 1290.00
Machine cutting charges 16.67 RM 24.00 1 RM 400.08
Half rounding the edges 16.67 RM 456.00 1 RM 7601.52
Add for MA @ 20% 0.20 3200.64 640.13
Add water charges 1% 0.01 44171.03 441.71
Rate for 10 sqm 44612.74
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to 10.50 Sqm 2576.00 1 Sqm 27048.00
18mm thick
Polymer cementitious additive for fixing 36.00 Kgs 207.00 1 Kgs 7452.00
tiles/stones etcTBSC-Q.III-05
B .LABOUR
Mason 1st class 3.00 Nos 580.00 1 Each 1740.00
Mason 2nd class 1.00 Nos 550.00 1 Each 550.00
Mazdoor(un skilled) 8.00 Nos 520.00 1 Each 4160.00
Add for MA @ 20% 0.20 6450.00 1290.00
Machine cutting charges 16.67 RM 24.00 1 RM 400.08
Half rounding the edges 16.67 RM 456.00 1 RM 7601.52
Add for MA @ 20% 0.20 3200.64 640.13
Add water charges 1% 0.01 50881.73 508.82
Rate for 10 sqm 51390.55
52 Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed
metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding
1.50 m x 1.50 m, using glass strips and finishing the top surface to required smoothness and slopes and thread lining
including cost of all materials like cement, metal sand and water and overheads & contractors profit complete for
finished item of work. (APSS No.701 & 710)
(BLD-CSTN-9-13)
Unit : 10sqm
A.MATERIALS :
6mm to 12mm HBG Metal 0.17 Cum 1542.87 1 Cum 262.29
Cement 120.00 Kgs 5200.00 1000 Kgs 624.00
Sand 0.085 Cum 692.50 1 Cum 58.86
B. LABOUR
Mason 1st class 1.25 Nos. 580.00 1 Each 725.00
Mason 2nd class 0.06 Nos. 550.00 1 Each 33.00
Mazdoor (unskiled) 3.00 Nos. 520.00 1 Each 1560.00
Add for MA @ 20% 0.20 2318.00 463.60
Add water charges 1% 1% 3726.75 37.27
Rate per 10 Sqm 3764.02
53 Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement,
pigments of size 300mm x 300mm and thickness 25mm of any shade as approved by Engineer-In-Charge set over
base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab
including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement
to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand,
water and tiles etc.,and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Chequred tiles 25mm thick TBSC-C.VIII- 10.50 sqm 288.00 1 sqm 3024.00
04
Cement for CM(1:6) proportion 28.80 Kgs 5200.00 1000 Kgs 149.76
for base coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
Cement for jointing & pointing 6.00 Kgs 5200.00 1000 Kgs 31.20
Sand for CM(1:6) proportion 0.12 Cum 892.50 1 Cum 107.10
B. LABOUR
Mason 2nd class 0.96 Nos. 450.00 1 Each 432.00
Man Mazdoor 2.24 Nos. 425.00 1 Each 952.00
Mazdoor (unskiled) 3.30 Nos. 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3100.00 620.00
Add water charges 1% 0.01 7203.66 72.04
Rate per 10 Sqm 7275.70
53 Flooring with Johnson EnduraTloor tiles-lvory & Terracota confirming to IS:13801 using aggregates, cement,
pigments of size 300mm x 300mm and thickness 10mm of any shade as approved by Engineer-In-Charge set over
base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab
including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement
to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand,
water and tiles etc.,and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Johnson EnduraTloor tiles-lvory & 10.50 sqm 437.30 1 sqm 4591.65
Terracota 10mm thick (Quotation)
Cement for CM(1:6) proportion 28.80 Kgs 5200.00 1000 Kgs 149.76
for base coat
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
Cement for jointing & pointing 6.00 Kgs 5200.00 1000 Kgs 31.20
Sand for CM(1:6) proportion 0.12 Cum 892.50 1 Cum 107.10
B. LABOUR
Mason 2nd class 0.96 Nos. 450.00 1 Each 432.00
Man Mazdoor 2.24 Nos. 425.00 1 Each 952.00
Mazdoor (unskiled) 3.30 Nos. 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3100.00 620.00
Add water charges 1% 0.01 8771.31 87.71
Rate per 10 Sqm 8859.02
Unit : 1sqm
A.MATERIALS :
precast concrete blocks for paving of M- 1.00 sqm 345.00 1 sqm 345.00
35 grade and thickness not less than 60
mm for Light traffic TBSC-C.IX-02
232.00
Add for MA @ 20% 0.20 232.00 46.40
Rate per 1 Sqm 692.65
Overheads & Contractors Profit @
13.615% 0.13615 692.65 94.30
Rate per 1 Sqm 786.95
Or Say Or Say 787
55 Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone slabs 15mm to
18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with
cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste
mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water
etc., complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of shahabad stone slabs 11.00 sqm 2704.88 10 sqm 2975.37
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
B.LABOUR
Mason 1st class 0.96 Nos. 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos. 550.00 1 Each 1232.00
Mazdoor(unskilled) 3.10 Nos. 520.00 1 Each 1612.00
Add for MA @ 20% 0.20 3400.80 680.16
Add water charges 1% 0.01 7514.74 75.15
Rate for 10 sqm 7589.89
56 Providing skirting to internal walls to 10.00 cm height with Polished Kadapa stone slabs 15mm to 18mm thick,
length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,
complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-22)
Unit = 10 sqm
A.MATERIALS :
Cost of Kadapa stone slabs 10.50 sqm 1544.88 10 sqm 1622.12
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
B.LABOUR
Mason 1st class 0.96 Nos. 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos. 550.00 1 Each 1232.00
Mazdoor(unskilled) 3.10 Nos. 520.00 1 Each 1612.00
Add for MA @ 20% 0.20 3400.80 680.16
Add water charges 1% 0.01 6161.50 61.61
Or Say 6223.11
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of Edge cut Rectified ceramic tiles 8 10.50 sqm 300.00 1 sqm 3150.00
mm thick
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 6.00 Kgs 34.00 1 Kg 204.00
B.LABOUR
Mason 1st class 0.77 Nos. 580.00 1 Each 446.60
Mazdoor(unskilled) 0.80 Nos. 520.00 1 Each 416.00
Add for MA @ 20% 0.20 862.60 172.52
Add water charges 1% 0.01 4847.53 48.48
Rate per 10 Sqm 4896.01
Rate for other Floors FF (G.F) SF TF 4F 5F 6F
Rate as worked out above 4896.01 4896.01 4896.01 4896.01 4896.01 4896.01
Lift charges ( Page 131 of Std. Data ) 0.00 86.26 172.52 258.78 345.04 431.30
Add for MA @ 20% 0.00 17.25 34.50 51.76 69.01 86.26
4896.01 4999.52 5103.03 5206.54 5310.06 5413.57
Overheads & Contractors Profit @ 666.59 680.68 694.78 708.87 722.96 737.06
13.615%
Rate per 10 Sqm 5562.60 5680.20 5797.81 5915.41 6033.02 6150.63
Rate per 1 RM 55.63 56.80 57.98 59.15 60.33 61.51
Or Say 56 57 58 59 60 62
58 Providing skirting to internal walls to 10 cm height with soluble salt porcelain vitrified tiles screen printed and
polished of thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of
any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm
thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and
jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work.(APSS
No.701 &707)
(BLD-CSTN-9-20)
Unit = 10 sqm
Cost of vitrified tiles 8-10mm thick 10.50 sqm 443.00 1 sqm 4651.50
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 2.00 Kgs 34.00 1 Kg 68.00
B.LABOUR
Mason 1st class 0.96 Nos. 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos. 550.00 1 Each 1232.00
Mazdoor(unskilled) 3.30 Nos. 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3504.80 700.96
Add water charges 1% 0.01 9383.67 93.84
Rate for 10 sqm 9477.51
55 Providing skirting to internal walls up to 10 cm height with Double charged / multi charged stain free full
body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm
1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and
designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed
with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and
overheads & contractors profit complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-21)
Unit = 10 sqm
Cost of Double charges vitrified tiles 8- 10.50 sqm 578.00 1 sqm
10mm thick TBSC-C.II-05 6069.00
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 2.00 Kgs 34.00 1 Kg 68.00
B.LABOUR
Mason 1st class 0.96 Nos. 580.00 1 Each 556.80
Mason 2nd class 2.24 Nos. 550.00 1 Each 1232.00
Mazdoor(unskilled) 3.30 Nos. 520.00 1 Each 1716.00
Add for MA @ 20% 0.20 3504.80 700.96
Add water charges 1% 0.01 10801.17 108.01
Rate for 10 sqm 10909.18
56 a) Providing skirting to internal walls to 10 cm height with 8mm thick mirror polished granite tiles length equal to
flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads &
contractors profit complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-21)
Unit = 10 sqm
A.MATERIALS :
Cost of granite tiles 8mm thick 10.50 sqm 1182.00 1 sqm 12411.00
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 5.00 Kgs 34.00 1 Kg 170.00
B.LABOUR
Mason 1st class 2.10 Nos. 580.00 1 Each 1218.00
Mason 2nd class 4.90 Nos. 550.00 1 Each 2695.00
Mazdoor(unskilled) 0.80 Nos. 520.00 1 Each 416.00
Add for MA @ 20% 0.20 4329.00 865.80
Add water charges 1% 0.01 18234.21 182.34
Rate for 10 sqm 18416.55
b) Cladding to internal walls with 8mm thick mirror polished granite tiles length equal to flooring
tiles,
Rate set
for over
otherbase coat of CM(1:5) 12 mm FF
Floors thick using screened
(G.F) SF sand with
TF cement slurry
4 F of honey
5 F like 6F
Rate as worked out above 18416.55 18416.55 18416.55 18416.55 18416.55 18416.55
Lift charges ( Page 131 of Std. Data ) 0.00 432.90 865.80 1298.70 1731.60 2164.50
Add for MA @ 20% 0.00 86.58 173.16 259.74 346.32 432.90
18416.55 18936.03 19455.51 19974.99 20494.47 21013.95
Overheads & Contractors Profit @ 2507.41 2578.14 2648.87 2719.60 2790.32 2861.05
13.615%
Rate per 10 Sqm 20923.96 21514.17 22104.38 22694.59 23284.79 23875.00
Rate per 1 Sqm 2092.40 2151.42 2210.44 2269.46 2328.48 2387.50
Or Say 2092 2151 2210 2269 2328 2388
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 3030.00 1 sqm 31815.00
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 5.00 Kgs 34.00 1 Kg 170.00
Machine cutting charges 66.67 RM 24.00 1 RM 1600.08
Add for MA @ 20% 0.20 640.03 128.01
B.LABOUR
Mason 1st class 2.10 Nos. 580.00 1 Each 1218.00
Mason 2nd class 4.90 Nos. 450.00 1 Each 2205.00
Man Mazdoor(Beldar) 0.80 Nos. 520.00 1 Each 416.00
Add for MA @ 20% 0.20 3839.00 767.80
Add water charges 1% 0.01 38778.30 387.78
Rate for 10 sqm 39166.08
b) Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black
and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand
with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 3030.00 1 sqm 31815.00
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 5.00 Kgs 34.00 1 Kg 170.00
B.LABOUR
Mason 1st class 2.10 Nos. 580.00 1 Each 1218.00
Mason 2nd class 4.90 Nos. 450.00 1 Each 2205.00
Man Mazdoor(Beldar) 0.80 Nos. 520.00 1 Each 416.00
Add for MA @ 20% 0.20 3839.00 767.80
Add water charges 1% 0.01 37050.21 370.50
Rate for 10 sqm 37420.71
57 Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of
design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness
between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all
shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick
using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing
with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc., complete overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
cost of glazed full body porcelain wall 10.50 sqm 750.00 1 sqm
tiles of size 300 x 600 mm 7875.00
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 6.00 Kgs 34.00 1 Kg 204.00
B.LABOUR
Mason 1st class 0.77 Nos. 580.00 1 Each 446.60
Mazdoor(unskilled) 0.80 Nos. 520.00 1 Each 416.00
Add for MA @ 20% 0.20 862.60 172.52
Add water charges 1% 0.01 9572.53 95.73
Rate for 10 sqm 9668.26
58 Providing dadooing to walls with glazed full body ceramic tiles of any size and thickness between 5 to 7mm 1st
quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs
with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand
with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of glazed coloured tiles TBSC-C.VI- 10.50 sqm 504.00 1 sqm 5292.00
02
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 6.00 Kgs 34.00 1 Kg 204.00
B.LABOUR
Mason 1st class 0.77 Nos. 580.00 1 Each 446.60
Mazdoor(unskilled) 0.80 Nos. 520.00 1 Each 416.00
Add for MA @ 20% 0.20 862.60 172.52
Add water charges 1% 0.01 6989.53 69.90
Rate for 10 sqm 7059.43
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of Double charged vitrified tiles 10.50 sqm 578.00 1 sqm
TBSC-C.II-05 6069.00
Sand for CM(1:5) base coat 0.12 cum 892.50 1 cum 107.10
Cement for CM(1:5) base coat 34.56 Kgs 5200.00 1000 Kgs 179.71
Cement for slurry 33.00 Kgs 5200.00 1000 Kgs 171.60
White cement for jointing & pointing 6.00 Kgs 34.00 1 Kg 204.00
B.LABOUR
Mason 1st class 0.77 Nos. 580.00 1 Each 446.60
Mazdoor(unskilled) 0.80 Nos. 520.00 1 Each 416.00
Add for MA @ 20% 0.20 862.60 172.52
Add water charges 1% 0.01 7766.53 77.67
Rate for 10 sqm 7844.20
(BLD-CSTN-3-7)
Unit: 1 Cum
A. Materials :-
Cement 129.60 Kgs 5200.00 1000 Kgs 673.92
Cost of brick jelly 20mm size(1/3rd rate) 460 Nos. 9217.35 1000 Nos. 1413.33
7F 8F 9F
4021.81 4021.81 4021.81
468.48 546.56 624.64
93.70 109.31 124.93
4583.99 4677.68 4771.38
624.11 636.87 649.62
5208.10 5314.55 5421.00
5208 5315 5421
(BLDS-CSTN-3-13)
Unit: 1 Cum
A.MATERIALS :
Cement 129.60 Kgs 5200.00 1000 Kgs 673.92
40mm HBG metal 0.90 Cum 1465.87 1 Cum 1319.28
Sand 0.45 Cum 692.50 1 Cum 311.63
B.LABOUR :
1st class Mason 0.167 Nos 580.00 1 Each 96.86
2nd class Mason 0.167 Nos 550.00 1 Each 91.85
Mazdoor (unskilled) 4.70 Nos 520.00 1 Each 2444.00
Add for MA @ 20% 0.20 2632.71 526.54
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 192.90 1 hour 192.90
Crew charges 1.00 hour 302.90 1 hour 302.90
Needle vibrator 40mm ( petrol ) 1.00 hour 36.50 1 hour 36.50
Crew charges 1.00 hour 218.00 1 hour 218.00
Add MA on crew charges 0.20 520.90 104.18
Water(including for curing) 1.20 kl 108.00 1 kl 129.60
Basic cost per 1cum 6448.16
62 Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia
pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each
step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia
holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer
finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost
of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work.
63 Supplying and fixing of stainless steel (grade 304) 50mm dia pipe and 2mm thick medium class Grip bar along the
Ramp flight/Staircase Flight as per approved drawing including cost and conveyance of all materials to site, buffing
charges, polishing charges, overheads & contractors profit etc complete for finished item of work.
Cost of 50mm dia stainless steel pipes 2.39 Kgs 434.00 1 Kg 1037.26
(2.39 Kgs/RM)
Labour charges for fabrication 2.39 Kgs 188.00 1 Kg 449.32
Rate per 1 RM 1486.58
Overheads & Contractors Profit @
13.615% 0.13615 1486.58 202.40
1688.98
say 1689.00
65 Supply and fixing pre-cast RCC grills of any design of 50mm thick manufactured with M 30 grade concrete using
vibro compaction process using jointless FRP moulds to achieve shuttering finish and adequately reinforced as per
the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and labour
charges etc., overheads & contractors profit complete for finished item of work.
(BLD-CSTN-11-5)
Unit : 10 sqm
A.MATERIALS :
White cement TBSC-R.I-01 2.00 kgs 34.00 1 kgs 68.00
B.LABOUR :
Painter 1st class 0.063 Nos. 665.00 1 Each 41.90
Painter 2nd class 0.147 Nos. 550.00 1 Each 80.85
Mazdoor(unskilled) 0.32 Nos. 520.00 1 Each 166.40
Add for MA @ 20% 0.20 289.15 57.83
Sundries including brushes, ladders etc., 1% 414.97
@ 1%
Rate per 10 sqm 414.97
Overheads & Contractors Profit @ 0.13615 414.97 56.50
13.615%
Rate per 10 sqm 471.47
Rate per 1 sqm 47.15
Say 47.00
66 Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness
over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt
and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust,
applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper
for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental,
labour charges, over heads and contractors profit etc., complete for finished item of work in all floors for Internal
walls.
68 Painting to new walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC content less
than 50 grams/litre over promer coat using white cemnt as approved by Engineer-In-Charge, making 3 coats in all to
give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials,
including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and
overheads & contractors profit complete for finished item of work as per APSS 911 for internal walls in all floors.
(BLD-CSTN-12-1)
Unit = 10 Sqm
Cost of white cement 0.50 Kg 34.00 1 Kg 17.00
Painter 1st class 0.08 Nos. 665.00 1 Each 53.20
Painter 2nd class 0.19 Nos. 550.00 1 Each 104.50
Cost of washable oil bound distemper 1.70 Ltrs 63.00 1 Ltr 107.10
Painter 1st class 0.36 Nos. 665.00 1 Each 239.40
Painter 2nd class 0.84 Nos. 550.00 1 Each 462.00
Add for MA @ 20% 0.20 859.10 171.82
Sundries including brushes, ladders etc., 0.01 1155.02
@ 1%
1155.02
Overheads & Contractors Profit @ 0.13615 1155.02 157.26
13.615%
Rate per 10 sqm 1312.28
Rate per 1 sqm 131.23
Say 131.00
(BLD-CSTN-11-10)
Unit = 10 Sqm
Cost of washable oil bound distemper 1.70 Ltrs 63.00 1 Ltr 107.10
Painter 1st class 0.36 Nos. 665.00 1 Each 239.40
Painter 2nd class 0.84 Nos. 550.00 1 Each 462.00
Add for MA @ 20% 0.20 701.40 140.28
Sundries including brushes, ladders etc., 0.01 948.78
@ 1%
948.78
Overheads & Contractors Profit @ 0.13615 948.78 129.18
13.615%
Rate per 10 sqm 1077.96
Rate per 1 sqm 107.80
Say 108.00
70 Painting to new walls with 2 coats of water proof cement paint of shade as approved by the Engineer-In-Charge
over a base coat of aproved white cement base coat making 3 coats in all to give an even shade after thourughly
brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all
materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete
for finished item of work as per SS 912 in all floors
(BLD-CSTN-12-5)
Cost of white cement for base coat 1.00 Kgs 34.00 1 Kgs 34.00
Painter 1st class 0.21 Nos. 665.00 1 Each 139.65
Painter 2nd class 0.49 Nos. 550.00 1 Each 269.50
Water proof cement paint 3.50 Kgs 60.00 1 Kgs 210.00
Painter 1st class 0.15 Nos. 665.00 1 Each 99.75
Painter 2nd class 0.35 Nos. 550.00 1 Each 192.50
Mazdoor(unskilled) 1.50 Nos. 520.00 1 Each 780.00
Add for MA @ 20% 0.20 1481.40 296.28
Sundries including brushes, ladders etc., 0.01 2021.68
@ 1%
2021.68
Overheads & Contractors Profit @
13.615% 0.13615 2021.68 275.25
Rate per 10 sqm 2296.93
Rate per 1 sqm 229.69
Or Say Say 230.00
(BLD-CSTN-12-4)
Water proof cement paint TBSC-G.II- 3.50 Kgs 60.00 1
Kgs
04 210.00
Painter 1st class 0.15 Nos. 665.00 1 Each 99.75
Painter 2nd class 0.35 Nos. 550.00 1 Each 192.50
Mazdoor(unskilled) 1.50 Nos. 520.00 1 Each 780.00
Add for MA @ 20% 0.20 1072.25 214.45
Sundries including brushes, ladders etc.,
@ 1% 0.01 1496.70
1496.70
Overheads & Contractors Profit @ 0.13615 1496.70 203.78
13.615%
Rate per 10 sqm 1700.48
Rate per 1 sqm 170.05
Or Say Say 170.00
68 Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic
emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls
including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour
charges etc., and overheads & contractors profit complete for finished item of work in all floors.
69 Supply & fixing of PVC WATER STOPPER 230mm wide for Expansion joints at slab,including cost & conveyance of
material , labour charges & contractors profit.Complete for finished item for work.
71 Painting to new wood work and flush shutters with lappam finish, over a primary coat and painting two coats
of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre of approved
shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete
including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials
etc., and overheads & contractors profit complete in all floors (APSS No.1200, 1207 & 1211).
(BLD-CSTN-12-12-196)
Cost of Synthetic Enamel Paint TBSC- 1.10 Ltr 221.00 1
Ltr
G.V-02 243.10
1st Class Painter 0.36 Nos. 665.00 1 Each 239.40
2nd Class Painter 0.84 Nos. 550.00 1 Each 462.00
Add for MA @ 20% 0.20 701.40 140.28
Sundries including brushes , ladders etc., 0.01 1084.78
@ 1%
1084.78
Overheads & Contractors Profit @ 0.13615 1084.78
13.615% 147.69
Rate per 10 sqm 1232.47
Rate per 1 sqm 123.25
Say 123.00
73 Painting primer coat on new wood work using red oxide Iron primer paint grade - 1 of approved brand including
cost and conveyance of all materials to site , all labour charges etc., and overheads & contractors profit complete in
all floors.(APSS No. 1201, 1212 & 1207).
(BLD-CSTN-12-7)
Unit : 10 sqm
A.MATERIALS :
Red oxide primer 0.70 Ltr 149.00 1 Ltr 104.30
B.LABOUR :
1st Class Painter 0.21 Nos. 665.00 1 Each 139.65
2nd Class Painter 0.49 Nos. 550.00 1 Each 269.50
Add for MA @ 20% 0.20 409.15 81.83
Sundries including brushes , ladders etc.,
@ 1% 0.01 595.28
595.28
Overheads & Contractors Profit @ 0.13615 595.28
13.615% 81.05
Rate per 10 sqm 676.33
Rate per 1 sqm 67.63
Say 68.00
(BLD-CSTN-12-12-197)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint TBSC- 1.10 Ltr 221.00 1 Ltr 243.10
G.V-02
B.LABOUR :
1st Class Painter 0.33 Nos. 665.00 1 Each 219.45
2nd Class Painter 0.77 Nos. 550.00 1 Each 423.50
Add for MA @ 20% 0.20 642.95 128.59
Sundries including brushes , ladders etc., 0.01 1014.64
@ 1%
1014.64
Overheads & Contractors Profit @ 0.13615 1014.64 138.14
13.615%
Rate per 10 sqm 1152.78
Rate per 1 sqm 115.28
Say 115.00
72 Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than
50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to
site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-198)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint TBSC- 0.90 Ltr 289.00 1
Ltr
G.V-01 260.10
B.LABOUR :
1st Class Painter 0.33 Nos. 665.00 1 Each 219.45
2nd Class Painter 0.77 Nos. 550.00 1 Each 423.50
Add for MA @ 20% 0.20 642.95 128.59
Sundries including brushes , ladders etc., 0.01 1031.64
@ 1%
1031.64
Overheads & Contractors Profit @ 0.13615 1031.64
13.615% 140.46
Rate per 10 sqm 1172.10
Rate per 1 sqm 117.21
Say 117.00
74 Polishing two coats to teak wood doors using French spirit polish of approved brand for new wood work to teak
wood frame and shutters including sand papering to smooth surfaces etc. including cost and conveyance of all
materials to site, all labour charges etc., complete for finished item of work in all floors.
(BLD-CSTN-12-15)
A.Materials
French polish 0.228 Ltrs 217.00 1 Ltrs 49.48
cost of spirit 1.63 Ltrs 118.00 1 Ltrs 192.34
B.Labour
1st Class Painter 0.96 Nos. 665.00 1 Nos. 638.40
2nd Class Painter 2.24 Nos. 550.00 1 Nos. 1232.00
Add for MA @ 20% 0.20 1870.40 374.08
Sundries for terpentaine, sand paper, 0.01 2486.30
putty, wood filler, white woolen cloth,
linseed oil, cotton etc., @ 1%
2486.30
Overheads & Contractors Profit @ 0.13615 2486.30 338.51
13.615%
Rate per 10 Sqm 2824.81
Rate per 1 Sqm 282.48
Say 282.00
74 Supply & applying Poly-Urethane Water Proof Polish Glossy/ Matt finish to the wood works duly cleaning the
surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper,
clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3
hrs, sand with 180 and 320 No., emery paper, applying two component wood sealer, after the surface preparation
applying one coat of approved spraying PU thinner (for spraying) / applying one coat of approved brushing PU thinner
or general purpose thinner (for brushing) and apply one coat of PU by brush or spray, air-dry overnight, Sand again
with 180 No. emery paper and removing dust, applying second coat of PU, air drying for 4 - 6 Hrs, Sand with 320 No
emery paper, and applying (either with spray or brush) two coats of approved brand PU including cost & labour
charges, emery papers, cost of thinner & Poly-Urethane Water Proof Polish, over heads and contracors profit etc.,
complete for finished item of work
75 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm
centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the
collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the
pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all
accessories all fixtures and painted with one coat of approved steel primer etc., overheads & contractors profit
complete for finished item of work as per special spn 1105
74 Providing specialized polysulphide sealant treatment to the expansion joints (Size : 25mm x 12mm) including cost and
conveyance of all materials to site, all incidental, operational, labour charges etc.overheads & contractors profit
complete for finished item of work as per approved drawing for all floors duly a]. Chipping and removing of existing
covering on expansion joints b]. Cleaning of the surface from dirt, dust and other contaminations c].Application of one
coat of - High performance specially designed SBR latex polymer based bonding agent d]. Providing and application
of Acrylic Polymer modified instatement concrete /mortar to the damaged edges of joint and making the groove. e].
Providing and fixing of masking tape on top of the joint both sides f]. Providing and fixing of Back up support material
of Backer rod to leave the depth of 12mm on the joint g]. Providing and application of one coat of polysulphide primer
on inner edges of Joint. h]. Providing and application of Two part Polysulphide sealant to a width of 25mm and 12mm
depth with putty knife and neat finish i]. Removing of masking tape and providing and application of two coats of
Acrylic elastomeric cementitious coating.
76 Providing and fixing of 24 gauge alluminium sheet over expansion joint groove of width 15cm fixed to walls /
columns at one edge and resting over the other block walls/columns concealing expansion joint with slotted holes for
free edge of aluminium sheet to facilitate free movement of aluminium sheet over the finished surface of expansion
joint and wall face using sheet metal screws with nylon receiver complete including cost and conveyance of all
materials to site, all incidental, operational, labour charges , overheads & contractors profit etc., complete for finished
item of work as per approved drawing (for all floors for vertical joints and bottom of slab)
verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure,
with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall should be with self-
expanding cap & screws. The rate is inclusive of cost and conveyance of all materials to site, all labour charges,
incidental charges, cost of all consumables etc. and scaffolding charges, form work , overheads & contractors profit
etc., complete for finished item of work in all floors.
77 Supplying and fixing Gyp board Fine line Grid false ceiling (GS-FLC-4.6)using 12.5mm thick Gyp Board sheet
tiles of size 595mm x 595mm conforming to IS 2095 - 1992 fixing to Gyp steel precoated GI wall angle of size 25mm x
25mm x 0.70mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610mm center to center
and suspending the frame work using precoated GI Tee section (24mm x 38mm x 0.7mm) from soffit at 1220mm
center to center fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI Tee
section with 4mm dia GI rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200mm
center to center and fixing the 12.5mm Gypboard sheet tiles of size 595mm x 595mm and finishing two coats of
drywall top coat, overheads and contractor profit complete for finished item of work in all floors.
80 Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI mark MS Tube
for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational, incidental, labour
charges , overheads & contractors profit for finished item of work.etc., complete for finished item of work in all floors
for stair case head room roof.
81 Supply of Structural Steel hollow Square & Rectangular sections conforming to IS 4923-1997 for fixing of GI
Sheet including cost and conveyance of all materials to work site and all operational, incidental, labour charges ,
overheads & contractors profit for finished item of work.etc., complete for finished item of work in all floors for stair
case head room roof.
82 Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness,
Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester
painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum
12 Meters with Regular Range Colours fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled
with white lead & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets
complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses including cost and
conveyance of all materials , labour charges , overheads and contractors profit etc., complete for finished item of work
in all floors.
Unit : 10 sqm
A. MATERIALS:
Galvalume sheet 0.50mm thick 10.50 sqm 434.00 1 sqm 4557.00
TBSC-D.VI-05
G.I scam bolts & nuts 2 x 27 (laps) x 17 47.91 Nos. 8.00 1 No. 383.28
= 884 TBSC-D.VI-14
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 43.90 Nos. 12.00 1 No. 526.80
3 nos = 810 nos. with washers or srews,
if wooden battens used. TBSC-D.VI-16
Limpet washers (for scam & ‘J’ bolts) 91.82 Nos. 4.00 1 No. 367.28
TBSC-D.VI-18
Bitumen washers TBSC-D.VI-19 91.82 Nos. 4.00 1 No. 367.28
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 550.00 1 No. 462.00
Man mazdoor (beldar) 0.91 Nos. 520.00 1 No. 473.20
Add for MA @ 20% 0.20 935.20 187.04
Rate per 10 sqm 7323.88
Rate per 1 sqm 732.39
Overheads & Contractors Profit @ 0.13615 732.39 99.71
13.615%
Rate per 1 sqm 832.10
say 832.00
83 Supply and delivery of encapsulated plastic steps manufactured as per companies standard specification
including cost of materials packing as per companiess standards, loading, transportation, unloading and stacking at
site of work , and taxes such as complete sales tax,C.E.D and others etc., as applicable including labour charges for
fixing etc. complete for finished item of work.
1 Roofing with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling
screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with
25x3 mm Butyl tape. The sheets are provided with anti capillary grove including cost and conveyance of all
materials , labour charges , overheads and contractors profit etc., complete for finished item of work in all floors..
85 Supply and fixing ornamental MS Wicket gate Size 1.50m x 3.00m as per the approved drawing using 75mm x
75mm x 6mm MS angle alround for frame and 63mm x 6mm MS flats in 6 rows horizontally, 25mm MS square vertical
bars at 125mm c /c and CI spikes 9" long at the top and 6" long spikes in two rows in the middle, 3 Nos of Pin clamps
fixed in RCC columns, providing 2 Nos.of MS powder coated aldrops 300mm long including cost all taxes and
conveyance of all materials,fabrication charges welding charges incidental charges all labour charges, overheads and
contractor profit etc., complete for finsihed item of work.
79 Drilling holes in hard granite or sheet rock with uising Pneumatic Compressor 20mm dia as applicable including
labour charges etc. complete for finished item of work as directed by the Engineer-in-Charge .
79 Supplying and fabricating, erecting and fixing in position tabular trusses of approved design with M.S tube
conforming to I.S-1161 specifications including roof frame work consisting of rafters,ties struts and purlins including
cost of foundations bolts, cleats, bearings plates,etc.,complete as per the sketch enclosed and including cost of
primary coat with red oxide paint including cost and conveyance of all materials, labour charges for erecting & fixing
all structural steel works erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and
cranes etc., complete in position, labour charges for fabrication, all incidental charges, overheads and contractor profit
etc., complete for finished item of work as directed by the Engineer-in-Charge
Road Datas
2 Construction of earthened road by forming Sub grade with approved material obtained from borrow pits with
an extra lead of 10KM having CBR more than 10, with all lifts and leads transporting to site, spreading, grading to
required slope and compacted , removal of top soil, excavation of soils at borrowed area, conveyance of soil,
depositing the soil , spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes
Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational
charges of T&P charges, complete for finished item of work as per MoRT&H specification 305 (5th Revision)
3 Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table
400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in
uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with
Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc.,
complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the
Engineer-in-charge. ( Payment will be made based on levels for finished item of work ).
with motor grader or by approved means, on prepared surface mixing by mix place method with Rotavator/ approved
means, at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of
work as per MoRT& H specification 401 (4th revision) and as directed by the Engineer- in - charge (Payment will be
made based on levels for finished item of work)
Unit : 1 cum
Taking output : 300 cum
a) Labour
Mate day 1 day 0.00
Mazdoor skilled 2.40 day 520.00 1.00 day 1248.00
Mazdoor unskilled 8.00 day 520.00 1.00 day 4160.00
Add for MA @ 20% 20% 5408.00 1081.60
b) Machinery
Vibratory roller 8T 6.00 hr 3475.20 1 hr 20851.20
Water tanker 6 KL 5.00 hr 769.00 1 hr 3845.00
Tractor with grader @ 25cum per hour 12.00 hr 520.00 1 hr 6240.00
Tractor with Rotavator 12.00 hr 520.00 1 hr 6240.00
c) Material
Coarse graded Granular sub base
material as per Table 400-2 of MORT &H
9.5mm to4.75mm @ 66% (Av rate
of 9.5-11.2mm , 5-7mm & 2.36-5mm)
45mm-9.50 IRC & MORT&H HBG/HBG 134.4 cum 1948.77 1 cum 261914.4192
Chips @ 35%
(Av. Of 40-45, 25-27, 19-22mm, 12-
14mm, 9.5-11.2mm )
9.5mm to 4.75mm @ 25% 182.4 cum 1295.37 1 cum 236275.488
(Av. rate of 9.5-11.2mm , 5-7mm & 2.36 -
5mm HBG M/C metal)
2.36mm and below @40% 67.2 cum 1086.87 1 cum 73037.664
(Rate of 2.36mm & below HBG metal)
Total 571227.57
D)Over head charges @
Add for Over head charges on (A)+(B)+ 0.05 625685.61 31284.28056
(C)
82 Plain Cement Concrete M 20 design mix using WEIGH BATCHER / MIXER, 20mm size hard granite machine crushed
graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like
cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering, shuttering, machine
mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc., complete for finished item of
work (APSS No. 402 & 403) for Kerb stone.
(BLD-CSTN-3-11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.80 Cum 1602.87 1 Cum 1282.30
Sand 0.40 Cum 692.50 1 Cum 277.00
Cement 350.00 Kgs 5200.00 1000 Kgs 1820.00
Water ( including for curing ) 1.20 Kl 108.00 1 Kl 129.60
B.MACHINERY :
Batching plant 0.50 cum 0.308 hour 265.80 1 hour 81.87
Crew charges 0.308 hour 454.80 1 hour 140.08
Needle vibrator 40mm ( petrol ) 1.000 hours 36.50 1 hour 36.50
Crew charges 1.000 hours 218.00 1 hour 218.00
Add for MA @ 20% 20% 358.08 71.62
C.LABOUR :
1st class mason 0.100 Nos. 580.00 1 Each 58.00
Mazdoor (Unskilled) 1.390 Nos. 520.00 1 Each 722.80
Add for MA @ 20% 20% 780.80 156.16
Rate per 1 cum 4993.92
Rate for other Floors FF
Cost of M 20 design mix 4993.92
TSMSIDC-SURYAPET Civil Data 243 of 336
Sl. Description Rate Amount (in
Quantity Per Unit
No. (in Rs.) Rs.)
Hire charges of centering and scaffolding 72.00
Providing, Laying, Spreading and compacting graded HBG/HBG crushed stone aggregate to Wet Mix macadem
specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix
plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well
prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-
in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work. (Payment based on levels for
finished item of work)
formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling
the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and
plate vibrators and finished in continuous operation including provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction
joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water
finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
Unit = cum
Taking output = 75 cum (172.50 t)
(100 x 3.75 x 0.200)
a) Labour
Mate day -
Mason 1st Class 5.00 day 580.00 1 day 2900.00
Mason (2nd class) 5.00 day 550.00 1 day 2750.00
Mazdoor (Unskilled) 150.00 day 520.00 1 day 78000.00
Mazdoor (Skilled) 6.00 day 520.00 1 day 3120.00
Surveyor 2.00 day 885.00 1 day 1770.00
Mazdoor ( semi skilled) 6.00 day 520.00 1 day 3120.00
Blacksmith for cutting of dowel bars
including removal of burrs, fabrications &
fixing of dowel bars. 1.00 day 575.00 1 day 575.00
Add for MA @ 20% 20% 92235.00 18447.00
b) Machinery
Concrete mixer 0.28 / 0.4 cum capacity
(6 mixers) with weigh batcher and
suitable capacity calibrated water tank
36.00 hour 192.90 1 hour 6944.40
crew charges 36.00 hour 302.90 1 hour 10904.40
Add for MA @ 20% 20% 10904.40 2180.88
Needle vibrator hire charges 9.00 hour 36.50 1 hour 328.50
crew charges 9.00 hour 218.00 1 hour 1962.00
Add for MA @ 20% 20% 1962.00 392.40
Screed vibrator hire charges (Sl.No.47
of I&CAD Hire charges) 9.00 hour 19.30 1 hour 173.70
crew charges 9.00 hour 296.40 1 hour 2667.60
Add for MA @ 20% 20% 2667.60 533.52
Plate vibrator (Sl.No.45 0f Hire charges)
9.00 hour 219.80 1 hour 1978.20
crew charges 9.00 hour 154.40 1 hour 1389.60
Add for MA @ 20% 20% 1389.60 277.92
Concrete joint cutting machine for initial
& final cuts- hire charges (Sl.No.33 of
Hire charges) 4.00 hour 419.10 1 hour 1676.40
82 Cutting of holes for beams, slabs and walls for plumbing lines including cost and conveyance of all materials to site,
labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302
1319 & 1326)
83 Supply and fixing of wire mesh(chiken mesh) at joint of RCC and brick work(internal and external walls) area with nails
overheads & contractors profit etc., complete
Rabbit wire mesh (chicken mesh) of not 1.00 Sqm 20.00 1 Sqm 20.00
less than 30 gauge -TBSC-E.I-12
Overheads & Contractors Profit @ 0.13615 20.00 2.72
13.615%
22.72
Labour charges for fixing of chiken 1.00 Sqm 1 Sqm 113.00
mesh(as per quotation) 113
Add for MA @ 20% 20% 113.00 22.60
Rate per 1 sqm 158.32
158.00
85 Drilling holes of 25 mm dia and 800mm deep in hard rock or sheet rock with pneumatic compressor and placing
of 20mm dia Tor steel bars and grouting the holes in CM(1:2) prop. excluding cost of steel and its fabrication charges
but including cost and conveyance of all materials and labour charges etc.,and overheads & contractors profit
complete for finished item of work.
Unit : 1RM
Drilling holes as per item Sl No.143, 1.00 RM 144.00 1 RM 144.00
item No. 7 b II) (R&B)
Overheads & Contractors Profit @ 0.13615 144.00 19.61
13.615%
Rate per 1 RM 163.61
Say 164
Unit : 1RM
Rate as per SSR as per item Sl No.146, 1.00 RM 116.00 1 RM 116.00
item No. 8 II) (R&B)
Overheads & Contractors Profit @ 0.13615 116.00 15.79
13.615%
Rate per 1 RM 131.79
Say 132
87 Clearing Juliflora (Prosafis) jungle including up-rooting and removing of Juliflora stumps including all labour
charges.
Basic rate as per item No.112.d 1.00 SQM 3.50 1 SQM 3.50
Overheads & Contractors Profit @ 0.13615 3.50 0.48
13.615%
3.98
Say 4.000
b) Labour charges for aluminium doors ( S.No.11 of Page No. 396 of SoR 2011-12 )
1st class carpenter 0.099 Nos. 685.00 Each 67.82
2nd class carpenter 0.198 Nos. 550.00 Each 108.90
Power Saw Cutter -Hand Operated -Operator 0.099 Nos. 685.00 Each 67.82
Power Drill -Hand Operated -Operator 0.099 Nos. 685.00 Each 67.82
Mazdoor(Unskilled) 0.297 Nos. 520.00 Each 154.44
Non-technical work inspector 0.099 Nos. 685.00 Each 67.82
Add for MA @ 20% 0.20 534.60 106.92
Machinery
Power Saw Cutter -Hand Operated -Hire 0.793 Hrs 146.00 1 Hour 115.78
charges
Power Drill -Hand Operated -Hire charges 0.793 Hrs 137.00 1 Hour 108.64
865.94
Power charges for Motors 1% 0.01 865.94 8.66
Labour charges per 1 sqm Or Say 874.60
c) Labour charges for aluminium sliding windows ( S.No.10 of Page No. 395 of SoR 2011-12 )
1st class carpenter 0.096 Nos. 685.00 Each 65.76
2nd class carpenter 0.289 Nos. 550.00 Each 158.95
Power Saw Cutter -Hand Operated -Operator 0.096 Nos. 685.00 Each 65.76
Power Drill -Hand Operated -Operator 0.096 Nos. 685.00 Each 65.76
Mazdoor(Unskilled) 0.289 Nos. 520.00 Each 150.28
Non-technical work inspector 0.096 Nos. 685.00 Each 65.76
Add for MA @ 20% 0.20 572.27 114.45
C.Machinery
Power Saw Cutter -Hand Operated -Hire 0.771 Hrs 146.00 1 Hour 112.57
charges
Power Drill -Hand Operated -Hire charges 0.771 Hrs 137.00 1 Hour 105.63
904.92
Power charges for Motors 1% 0.01 904.92 9.05
Labour charges per 1 sqm Or Say 913.97
d) Labour charges for aluminium partitions partly glazed ( S.No.8 of Page No. 394 of SoR 2011-12 )
1st class carpenter 0.434 Nos. 685.00 Each 297.29
2nd class carpenter 0.434 Nos. 550.00 Each 238.70
Power Saw Cutter -Hand Operated -Operator 0.043 Nos. 685.00 Each 29.46
Power Drill -Hand Operated -Operator 0.058 Nos. 685.00 Each 39.73
Mazdoor(Unskilled) 0.145 Nos. 520.00 Each 75.40
Non-technical work inspector 0.072 Nos. 685.00 Each 49.32
Add for MA @ 20% 0.20 729.90 145.98
C.Machinery
Power Saw Cutter -Hand Operated -Hire 0.347 Hrs 146.00 1 Hour 50.66
charges
Power Drill -Hand Operated -Hire charges 0.463 Hrs 137.00 1 Hour 63.43
989.97
Power charges for Motors 1% 0.01 989.97 9.90
Labour charges per 1 sqm Or Say 999.87
Power Drill -Hand Operated -Operator 0.100 Nos. 685.00 Each 68.50
Mazdoor(Unskilled) 0.300 Nos. 520.00 Each 156.00
Non-technical work inspector 0.100 Nos. 685.00 Each 68.50
Add for MA @ 20% 0.20 595.00 119.00
C.Machinery
Power Saw Cutter -Hand Operated -Hire 0.800 Hrs 146.00 1 Hour 116.80
charges
Power Drill -Hand Operated -Hire charges 0.800 Hrs 137.00 1 Hour 109.60
940.40
Power charges for Motors 1% 0.01 940.40 9.40
Labour charges per 1 sqm 949.80
88 Supply and fixing of two shutter main door cum fixed window as per approved drawing with best teak
wood frame of section 150mm x 100 mm with fixed fan light of 500mm at top and fixed panels of 600mm
width at sides fixed with 12mm thick Tinted - Bronze/Green glass using 12mm x 12mm teak wood beading
and fixing ornamental grill made of 25mm x 5mm MS flats as per the approved drawing in fan light portion
and fixed panels and 1st class teak wood top and middle rails & styles of section 120mm x 35mm, bottom
rail of size 150mm x 35mm and 12mm thick plain float glass for shutter with ornamental etching including
cost and conveyance to site of teak wood frame, shutters, glass including supply and fixing 6 nos MS
Zhold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 8 Nos butt
hinges(IS:205) 250mm long , 1 No. aldrop (IS:2681) 450mm long, 3 Nos tower bolts- 10mm (IS:204) of
200 mm long , 2 Nos 450 mm long fancy handles, 2 Nos door stoppers including fixing the fixtures to door
with required number of screws, bolt and nuts including labour charges for fixing the frame in position,
fixing the shutters to the frame, fixing glass in fan light portion etc., including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be
embedded in flooring for a depth of not less than 40 mm) (3000mm x 2600mm).
89 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm
x 65 mm with fixed fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x
12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of
30mm thick double shutters with bond wood solid block board type core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made
conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including
cost and conveyance to site of teak wood frame, flush shutter including supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Stainless steel
fixtures of 6 Nos. butt hinges (IS:12817) 150mm long, 1 No. aldrop (IS:15834) 300mm long, 2 Nos. tower
bolts - 10mm (IS:15833) of 200 mm long at top, 2 Nos. 150mm long handles , 2 Nos. door stoppers and 2
Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan
light portion etc., including overheads & contractors profit complete for finished item of work as per APSS
1001 & 1002 The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm)
(1800mm x 2600mm).
(BLD-CSTN-13-16)
Size : 1.80m x 2.60m 4.68 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.80 + 0.50
= 4.10 x 0.10 x 0.065 0.02665 cum
0.06058 cum
4 mm thick pin headed glass 2x0.9 x 0.50 0.90 sqm
Teak wood beading 2 x 2 (0.90+0.50) 5.60 RM
30 mm thick flush shutter 2 x 0.85 x 2.05 3.485 sqm
10 mm MS square bars 2 x 1.80 x 0.785 2.826 Kgs
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 91479.00 1 cum 3103.88
all sides, including cost and conveyance to site of teak wood frame, flush shutter including supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Stainless steel
fixtures of 6 Nos. butt hinges (IS:12817) 150mm long, 1 No. aldrop (IS:15834) 300mm long, 2 Nos. tower
bolts (IS:15833) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles , 2 Nos. door stoppers and 2
Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan
light portion etc., including overheads & contractors profit complete for finished item of work as per APSS
1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm)
(1500mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.60m 3.90 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 = 0.03393 cum
Outer frame - Horizontal 2 x 1.50 + 0.50
= 3.50 x 0.10 x 0.065 = 0.02275 cum
0.05668 cum
4 mm thick pin headed glass 2 x 0.75 x 0.5 = 0.75 sqm
Teak wood beading 2 x 2 (0.75+ 0.50) = 5.00 RM
30 mm thick flush shutter 2 x 0.70 x 2.05 = 2.87 sqm
10 mm MS square bars 2 x 1.50 x 0.785 = 2.355 Kgs
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 91479.00 1 cum 3103.88
on all sides, including cost and conveyance to site of teak wood frame, flush shutter including supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Stainless steel
fixtures of 6 Nos. butt hinges (IS:12817) 150mm long, 1 No. aldrop (IS:15834) 300mm long, 2 Nos. tower
bolts (IS:15833) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles, 2 Nos. door stoppers and 2
Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan
light portion etc, including overheads & contractors profit complete for finished item of work as per APSS
1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm)
(1200mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.60m 3.12 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 = 0.03393 cum
Outer frame - Horizontal 2 x 1.20 + 0.50
= 2.90 x 0.10 x 0.065 = 0.01885 cum
0.05278 cum
4 mm thick pin headed glass 2x0.6 x 0.5 = 0.60 sqm
Teak wood beading 2 x 2 (0.6 + 0.50) = 4.40 RM
30 mm thick flush shutter 2 x 0.55 x 2.05 = 2.255 sqm
10 mm MS square bars 2 x 1.20 x 0.785 = 1.884 Kgs
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 91479.00 1 cum 3103.88
size 300 mm x 40 mm x 5mm including cost of ISI marked Stainless steel fixtures of 3 Nos. butt hinges
(IS:12817) 150mm long , 1 No. aldrop (IS:15834) 300mm long, 1 No. tower bolt (IS:15833) of 200 mm x
10 mm dia at top, 2 Nos. 150mm long handles , 1 No. door stopper and 1 No. rubber bush including fixing
the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the
frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads &
contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door
shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2600mm).
(BLD-CSTN-13-16)
Size : 1.00m x 2.60m 2.60 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04693 cum
4 mm thick pin headed glass 1.00 x 0.50 0.50 sqm
Teak wood beading 2 x (1+ 0.50) 3.00 RM
30 mm thick flush shutter 1 x 0.90 x 2.05 1.845 sqm
93 Supply and fixing of doors as per approved drawings with medium teak wood frame of
section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin
headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars
and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block
board type core having cross bands and face veneers, hot pressed bonded with water proof
phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides including cost and conveyance to site of
teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300
mm x 40 mm x 5mm including cost of ISI marked Aluminium
fixtures of 3 Nos. butt hinges (IS:12817) 150mm long , 1 No. aldrop (IS:15834) 300mm long,
1 No. tower bolt (IS:15833) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles , 1 No.
door stopper and 1 No. rubber bush including fixing the fixtures to door with required number
of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the
shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors
profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door
shall be embedded in flooring for a depth of not less than 10 mm) (900mm x 2600mm)
(BLD-CSTN-13-16)
Size : 0.90m x 2.60m 2.34 sqm
Quantity analysis
93 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and
ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type
Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush
(BLD-CSTN-13-16)
Size : 2.00m x 2.10m 4.20 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 = 0.02743 cum
Outer frame - Horizontal 1 x 2.00
= 2.00 x 0.10 x 0.065 = 0.01300 cum
0.04043 cum
94 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and
ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type
Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including
(BLD-CSTN-13-16)
Size : 1.80m x 2.10m 3.78 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 = 0.02743 cum
Outer frame - Horizontal 1 x 1.80
= 1.80 x 0.10 x 0.065= 0.01170 cum
0.03913 cum
30 mm thick flush shutter 2 x 0.85 x 2.05 = 3.485 sqm
Cost of medium TW frame 2 m to 3m length 0.0274 cum 91479.00 1 cum 2509.27
95 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and
ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type
Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush
(BLD-CSTN-13-16)
Size : 1.50m x 2.10m 3.15 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.50
= 1.50 x 0.10 x 0.065 0.00975 cum
0.03718 cum
96 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and
ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type
Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush
(BLD-CSTN-13-16)
Size : 1.20m x 2.10m 2.52 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.20
= 1.20 x 0.10 x 0.065 0.00780 cum
0.03523 cum
Cost of medium TW frame below 2 m length 0.0078 cum 82331.00 1 cum 642.18
Cost of 30 mm thick flush shutter TBSC-L.II-05 2.255 sqm 1334.00 1 sqm 3008.17
92 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and
ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type
Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including
supply and
(BLD-CSTN-13-16)
Size : 1.00m x 2.10m 2.10 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.00
= 1.00 x 0.10 x 0.065 0.00650 cum
0.03393 cum
30 mm thick flush shutter 0.90 x 2.05 1.845 sqm
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 91479.00 1 cum 2509.27
94 Providing of Factory made prelaminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size
105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos.
of 50mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the
frame with the help of PVC fasteners of 3 no's to be provided for each vertical member, GI stiffeners of ("U"
channel of size 29x9x1mm, 150mm long) -3 no's at hinge point, Frame reinforcement of("U" GI channel of
size 46x22x.06mm),Bottom tie rod of ("U" GI channel size of 15x15x1mm) etc. omplete as per
manufacturers specification for finished item of work. Maximum door frame size : 980 x 2070 including
providing of 35mm thick Factory made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter
moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of
size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber),
core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with
prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides.
Hardware made out of steel coated butterfly hinges - 3 Nos. for each shutter and ISI make S.S round lock
completes for finished item of work. Maximum shutter size of :910x2030mm as per the design approved by
the Engineer-in-Charge inside including labour charges for fixing the frame in position, fixing the shutter to
the frame etc., including overheads & contractors profit complete for finished item of work.
93 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core
having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on
all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and
fixing 6 Nos.
MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Stainless steel fixtures of 3
Nos. butt hinges (IS:12817) 150mm long, 1 No. aldrop (IS:15834) 300mm long, 1 No. tower bolt
(IS:15833) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles , 1 No. door stopper and 1
No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical
frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900mm x 2100mm).
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 91479.00 1 cum 2509.27
94 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and
ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core
having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on
all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including
suply and fixing 6 Nos. MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked Stainless
steel fixtures 3 Nos. butt hinges (IS:12817) of 150mm long, 1 No. aldrop (IS:15834) 250 mm long, 1 No.
tower bolt (IS:15833) of
150 mm x 10mm dia, 2 Nos. 125mm long handles ,1 No. rubber bush including supplying and fixing
1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing the frame in
position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished
item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth
of not less than 10mm) (800mm x 2100mm).
(BLD-CSTN-13-16)
Quantity analysis Size : 0.80m x 2.10m 1.68 sqm
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 91479.00 1 cum 2509.27
95 Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron
sheet conforming to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating
of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass
Galvanized Iron sheet formed to double rebate profile of size 143 mm X 58 mm with maximum bending
radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin
pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush,double skin door shell with Lock
Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders
of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65
microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with
Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and
durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular
shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile
102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire
Rated door conforming to IS:3614 (Part2) 1992 including overheads and contractor profit etc., complete for
finished item of work
Rate as per SSR TBSC-L.III-22 1.00 Sqm 15024.00 1.00 Sqm 15024.00
Overheads & Contractors Profit @ 13.615% 0.13615 15024.00 2045.52
Rate for 1 Sqm 17069.52
Or Say 17070
brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weight Capacity up to 130
Kgs ) as approved by Engineer-in-Charge including supply and fixing ISI marked powder coated
aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles
(IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing
door , fixing the door with required No. of screws etc., including overheads & contractors profit complete
for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 –
1961) and as approved by the Engineer) (1800mm x 2600mm).
(BLD-CSTN-13-31)
Quantity analysis Size : 1.80m x 2.60m 4.68 sqm
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.80 + 2 x 2.60 8.80 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM
9.30 RM
= 9.30 RM @ 2.404 Kgs / 22.357 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm RM
4 x 2.10 + 2 x 2 x 0.90 12.00 RM
, 3.18 mm thick) = 12.00 RM @1.501 Kgs/ 18.012 Kgs.
Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 0.90 RM 1.80 RM
= 1.80 RM @ 2.646 Kgs / 4.763 Kgs.
Glazing clips RM
2 x 2 x 2(0.90+0.50) +2 x 2 42.40 RM
x= 2(0.90+1.20) + 2 x 2Kgs
42.40 RM @ 0.101 x 2 /RM 4.282 Kgs.
49.414 Kgs.
5mm thick plain glass 2 x 0.90 x 0.50 0.90 sqm.
5mm thick ground glass 2 x 0.90 x 1.20 2.16 sqm.
12mm thick prelaminated paticle board 2 x 0.90 x 0.90 1.62 sqm.
Rubber beading 2 x 2(0.90+0.50)+2 x 2(0.90+1.20) 14.00 RM
Cost analysis =
A.Material :
Cost of powder coated Al. sections TBSC-R.I- 49.414 Kgs. 332.00 1 Kgs. 16405.45
03
Cost of 5mm thick plain glass TBSC-F.I-02 0.90 sqm. 568.00 1 sqm. 511.20
5mm thick ground glass TBSC-F.IV-02 2.16 sqm. 759.00 1 sqm. 1639.44
12mm thick prelaminated paticle boardTBSC- 1.62 sqm. 877.00 1 sqm. 1420.74
H.III-48
Cost of rubber beading TBSC-R.I-11 14.00 RM 5.00 1 RM 70.00
Cost of floor springs TBSC-P.VII-03 2 Nos. 3967.00 Each 7934.00
Cost of Al. tower bolts 300mm TBSC-P.I-11 4 Nos. 125.00 Each 500.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm TBSC-P.IV-06 2 Nos. 343.00 Each 686.00
B.Labour charges 4.68 sqm. 874.60 1 sqm. 4093.12
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 4.68 Sqm: 33659.95
Overheads & Contractors Profit @ 13.615% 0.13615 33659.95 4582.80
38242.75
Rate per 1 Sqm: 8171.53
Or Say 8172
as required, embedding in floors and SS cover plates with brass pivot and sigle piece MS Sheet outer box
with slide plate etc.complete (Weight Capacity up to 130 Kgs) as approved by Engineer-in-Charge
including supply and fixing ISI marked powder coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt
(IS:204) 300mm long, 4 Nos. alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681)
300mm long including labour charges for manufacturing door, fixing the door with required No. of screws
etc., including overheads & contractors profit complete for finished item of work. (The Aluminium section
used shall be standard make confirming to IS 1948–1961) and as approved by the Engineer) (1500mm x
2600mm).
(BLD-CSTN-13-31)
Quantity analysis Size : 1.50m x 2.60m 3.90 sqm
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.50 + 2 x 2.60 = 8.20 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 = 0.50 RM
8.70 RM
= 8.70 RM @ 2.404 Kgs / 20.915 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm RM
4 x 2.10 + 2 x 2 x 0.75 = 11.40 RM
, 3.18 mm thick)
= 11.40 RM @1.501 Kgs/ 17.111 Kgs.
Bottom rails (114.30 x 44.45. 3.18mm thick) RM
2 x 0.75 = 1.50 RM
= 1.50 RM @ 2.646 Kgs / RM 3.969 Kgs.
Glazing clips 2 x 2 x 2(0.75+0.50) + 2 x 2 x RM
2(0.75+1.20)
= 38.80 RM @+ 0.101
2 x 2 xKgs
2(0.75+0.90)
/RM = 3.919 Kgs.
45.914 Kgs.
5mm thick plain glass 2 x 0.75 x 0.50 = 0.75 sqm.
5mm thick ground glass 2 x 0.75 x 1.20 = 1.80 sqm.
12mm thick prelaminated paticle board 2 x 0.75 x 0.90 = 1.35 sqm.
Rubber beading 2 x 2(0.75+0.50)+2 x 2 (0.75 + 1.20) 12.80 RM
Cost analysis =
A.Material :
Cost of powder coated Al. sections TBSC-R.I- 45.91 Kgs. 332.00 1 Kgs. 15243.45
03
Cost of 5mm thick plain glass TBSC-F.I-02 0.75 sqm. 568.00 1 sqm. 426.00
5mm thick ground glass TBSC-F.IV-02 1.80 sqm. 759.00 1 sqm. 1366.20
12mm thick prelaminated paticle board TBSC- 1.35 sqm. 877.00 1 sqm. 1183.95
H.III-48
Cost of rubber beading TBSC-R.I-11 12.80 RM 5.00 1 RM 64.00
Cost of floor springs TBSC-P.VII-03 2 Nos. 3967.00 Each 7934.00
Cost of Al. tower bolts 300mm TBSC-P.I-11 4 Nos. 125.00 Each 500.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm TBSC-P.IV-06 2 Nos. 343.00 Each 686.00
B.Labour charges 3.90 sqm. 874.60 1 sqm. 3410.93
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 3.90 Sqm: 31214.53
Overheads & Contractors Profit @ 13.615% 0.13615 31214.53 4249.86
35464.39
Rate per 1 Sqm: 9093.43
Or Say 9093
as required, embedding in floors and SS cover plates with brass pivot and sigle piece MS Sheet outer box
with slide plate etc.complete (Weight Capacity up to 130 Kgs) as approved by Engineer-in-Charge
including supply and fixing ISI marked powder coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt
(IS:204) 300mm long, 4 Nos. alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681)
300mm long including labour charges for manufacturing door, fixing the door with required No. of screws
etc., including overheads & contractors profit complete for finished item of work. (The Aluminium section
used shall be standard make confirming to IS 1948–1961) and as approved by the Engineer) (1200mm x
2600mm).
(BLD-CSTN-13-31)
Quantity analysis Size : 1.20m x 2.60m 3.12 sqm
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.20 + 2 x 2.60 = 7.60 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 = 0.50 RM
8.10 RM
= 8.10 RM @ 2.404 Kgs / 19.472 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm RM
4 x 2.10 + 2 x 2 x 0.75 = 11.40 RM
, 3.18 mm thick)
= 11.40 RM @1.501 Kgs/ 17.111 Kgs.
Bottom rails (114.30 x 44.45. 3.18mm thick) RM
2 x 0.6 = 1.20 RM
= 1.20 RM @ 2.646 Kgs / RM 3.175 Kgs.
Glazing clips 2 x 2 x 2(0.60+0.50) + 2 x 2 x RM
2(0.6+1.20)
= 35.20 RM + @20.101
x 2 x Kgs
2(0.6+0.90)
/RM = 3.555 Kgs.
43.313 Kgs.
5mm thick plain glass 2 x 0.60 x 0.50 = 0.60 sqm.
5mm thick ground glass 2 x 0.60 x 1.20 = 1.44 sqm.
12mm thick prelaminated paticle board 2 x 0.60 x 0.90 = 1.08 sqm.
Rubber beading 2 x 2(0.60+0.50)+2 x 2 (0.60 + 1.20) 11.60 RM
Cost analysis =
A.Material :
Cost of powder coated Al. sections TBSC-R.I- 43.31 Kgs. 332.00 1 Kgs. 14379.92
03
Cost of 5mm thick plain glass TBSC-F.I-02 0.60 sqm. 568.00 1 sqm. 340.80
5mm thick ground glass TBSC-F.IV-02 1.44 sqm. 759.00 1 sqm. 1092.96
12mm thick prelaminated paticle board TBSC- 1.08 sqm. 877.00 1 sqm. 947.16
H.III-48
Cost of rubber beading TBSC-R.I-11 11.60 RM 5.00 1 RM 58.00
Cost of floor springs TBSC-P.VII-03 2 Nos. 3967.00 Each 7934.00
Cost of Al. tower bolts 300mm TBSC-P.I-11 4 Nos. 125.00 Each 500.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm TBSC-P.IV-06 2 Nos. 343.00 Each 686.00
B.Labour charges 3.12 sqm. 874.60 1 sqm. 2728.75
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 3.12 Sqm: 29067.58
Overheads & Contractors Profit @ 13.615% 0.13615 29067.58 3957.55
33025.13
Rate per 1 Sqm: 10584.98
Or Say 10585
96 Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize
steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120
GSM) coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy
polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section
of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll
formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb
kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 2 Nos., 6”
D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 6 Nos, Mortise Lock ofapproved quality – 1 No,
frames fixed to the concrete/masonry wall by means of self expanding screws including overheads and
contractor profit etc., complete for finished item of work for Double leaf Door.
97 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding doors three
track - two glass shutters sliding and one mesh shutter sliding- 95 -Series duly manufactured
using UPVC reinforced profiles of (108 mm x 45 mm)/(95.50 mm x 60 mm) x 2.0 mm for outer
frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.0 mm for sliding door shutter frames capable
of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50
microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the
window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter
shall be made of (48.5 mm x 30 mm))/(50 mm x 26.5 mm) x 2.0 mm UPVC profile section and
fitted with nylon/polymer mesh and rollers/pulley duly fixed with TPV Gaskets/ EPDM
weathering seal resistant accessories like clipping locking system made of aluminium 1 No.,
per set of sashes and the system is to be installed at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all
materials, accessories, labour charges for transportation, erection at site with templates for
casement sizing, overheads and contractors profit etc., complete for finished item of work
Rate as per SSR TBSC- 1.00 Sqm 7048.00 1.00 Sqm 7048.00
L.III-10
Overheads & Contractors Profit @ 13.615% 0.13615 7048.00 959.59
Rate for 1 Sqm 8007.59
Or Say 8008
Rate as per SSR TBSC-L.III-10 1.00 Sqm 7048.00 1.00 Sqm 7048.00
Providing and Fixing Pre painted Steel Sliding Windows / Doors - 3 track sliding window /doors
shutter with mesh shutter – (2 - glass shutters and 1 - mesh shutter) fabricated from Roll
formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS
513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated
thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a
polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or
powder coated with pure polyester powder up to 50-60 microns thick. Section for external
frameas
Rate should be of 44 x 107mm .Section
per SSR for glass shutter
TBSC-M.II- 1.00 Sqmand mesh shutter in1.00
8638.00 case of door 8638.00
Sqm
should be of 35 x 67 mm Section for euro groove should be 25 x 31mm (Aluminium/ Plastic) (in
13
case of window
Overheads sections should
& Contractors Profit @be13.615%
35 x 49 mm and 25 x 24 mm and
0.13615 30 x 41 mm) and Lap 1176.06
8638.00
Strip should be
Rate for 1 Sqm of 39 x 41mm (30 x 41 mm & Touch lock for window ) (Aluminium/ Plastic. The 9814.06
doors/ windows should be panelled with 5mm thick plain float glass. Corner bracket for internal
and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Or Say 9814
Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by
means of corner bracket. The above frames should be fixed to the concrete/masonry walls by
means of self expanding brackets & screws including 10mm square guard bars with 6” pitch
(152.4mm) (in case of windows only) and all Taxes complete for finished item of work.
1 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors with
openable
Rate as pershutters duly manufactured using UPVC reinforced
SSR TBSC-L.III-12 1.00 Sqm profiles (Composition
8544.00 of profile 8544.00
1.00 Sqm
Overheads & Contractors Profit @ 13.615% 0.13615 8544.00 1163.27
Rate for 1 Sqm 9707.27
Or Say 9707
2 Providing & Fixing of Open able Windows with Flymesh made of pre-painted steel as per
a IS 513 of
Centre 0.58mm
fixed both thick galvanizedshutter
side openable as per window
IS 277 finish paintedx1800mm
: 1800mm with a polyester paint and3.24
with fixed the sqm
fan light of 500mm
Window portion at top : TBSC-M.I-11 2.34 Sqm 7244.00 1 Sqm 16950.96
b Centre fixed both side openable shutter window 1500mm x1800mm with fixed 2.70 sqm
fan lightportion
Window of 500mm at top : TBSC-M.I-10 1.95 Sqm 8280.00 1 Sqm 16146.00
3 Supply and fixing of pre-painted steel casement/openable windows base steel as per IS
A) 513 of - 0.58mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint,
WINDOWS
a Centre fixed both side openable shutter window 1800x1800 with fixed fan light 3.24 sqm
of 500mm
Window at top :
portion TBSC-M.I-04 2.34 Sqm 6858.00 1 Sqm 16047.72
b Centre fixed both side openable shutter window 1500x1800 with fixed fan light 2.70 sqm
of 500mm
Window at top :
portion TBSC-M.I-04 1.95 Sqm 6858.00 1 Sqm 13373.10
Top Hung 2 '-0 x 2'-0 (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter
frame
Rate assection size of 46mm x 46 mm
per SoR and (ii)1.00
TBSC- Ventilators:
Sqm Top Hung 4 1'-0
7978.00 x 2'-0 7978.00
Sqm
M.III-01
Overheads & Contractors Profit @ 13.615% 0.13615 7978.00 1086.20
Rate for 1 Sqm Or Say 9064.00
a Fixed louvers 2'-0 x 2'-0 (609.6 x 609.6mm) (Box section) outer frame section size of 33 x 56 mm and (ii)
Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56
mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm)
(Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
97 SSupplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding
windows duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a
minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of
(62mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x
2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with
hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through
fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed
with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC.
System shall have single point locking with Touch Lock and the system is to be installed at the site using
anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and
conveyance of all materials, accessories, labour charges for transportation, erection at site including
overheads and contractors profit etc., complete for finished item of work.
Rate as per SSR TBSC-M.II-09 1.00 Sqm 6818.00 1.00 Sqm 6818.00
Overheads & Contractors Profit @ 13.615% 0.13615 6818.00 928.27
Rate for 1 Sqm 7746.27
Or Say 7746
97 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with
mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced
profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of
CaCo3 for every 100 parts of PVC resin) of (94mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer
frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20mm for sliding shutter frames capable of mounting
single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness
of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm
thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25mm)/(52 mm x 21.5
mm) x 2.0 mm fitted with Vinyl Coated Fiber mesh- on rollers/ pulley duly fixed with Grey colour TPV
Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single
point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon
rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site including overheads and contractors profit
etc., complete for finished item of work.
Rate as per SSR TBSC-M.II-11 1.00 Sqm 7119.00 1.00 Sqm 7119.00
Overheads & Contractors Profit @ 13.615% 0.13615 7119.00 969.25
Rate for 1 Sqm 8088.25
Say 8088
Rate as per SSR TBSC-M.I-24 1.00 Sqm 7521.00 1.00 Sqm 7521.00
Overheads & Contractors Profit @ 13.615% 0.13615 7521.00 1023.98
Rate for 1 Sqm 8544.98
Or Say 8545
99 Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC
sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and
reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of
60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60
mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of
5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin). Ventilator shall
be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be
2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation,
erection at site including overheads and contractor profit etc., complete for finished item of work.
Rate as per SSR TBSC-M.III-07 1.00 Sqm 6407.00 1.00 Sqm 6407.00
Overheads & Contractors Profit @ 13.615% 0.13615 6407.00 872.31
Rate for 1 Sqm 7279.31
Say 7279
100 Providing, supplying & fixing of Top hung Ventilator with Exhaust Fan provision made
out
Rateofas
multi
per chambered
SSR uPVC sections with TPV Gasket
TBSC- 1.00for
Sqmsash & 9014.00
Glazing bead shall
1.00 Sqm be co- 9014.00
M.III-08
Overheads & Contractors Profit @ 13.615% 0.13615 9014.00 1227.26
Rate for 1 Sqm 10241.26
Or Say 10241
101 F
Rate as per SSR TBSC- 1.00 Sqm 1145.00 1.00 Sqm 1145.00
R.I-24
Overheads & Contractors Profit @ 13.615% 0.14 1145.00 155.89
Rate for 1 Sqm 1300.89
Say 1301
Cost of 25X 6mm MS Flat (RMR) 8.40 Kgs 62000.00 1000 Kgs 520.80
Labour charges for fabrication of steel TBSC- 34.78 Kgs 37.00 1 Kg 1286.71
T.I-16
Labour charges for fixing 34.78 6.00 208.66
TBSC-T.I-17
Add for MA @ 20% 0.20 723.34 144.67
Rate per 3.06 Sqm 3769.77
1231.95
Overheads & Contractors Profit @ 13.615% 0.13615 1231.95 167.73
1399.68
Rate per 1 Sqm Or Say 1400
101 Providing and Fixing Pre painted Steel Sliding Window 2 Track-2 Panel Sliding Window
fabricated
Rate as perfrom
SSRRoll formed sections made of galvanized
TBSC- Steel colour
1.00 Sqm coated/powder
7813.00 coated 7813.00
1.00 Sqm
M.II-01
Overheads & Contractors Profit @ 13.615% 0.13615 7813.00 1063.74
Rate for 1 Sqm 8876.74
Or Say 8877
102 Supply and fixing powder coated alimunium fully glazed 2 shutter windows with fixed
panel
Quantityin between
analysis openable shutters as per approved
Size :drawings using anodized aluminium
1.80m x 1.30m 2.34 sqm
1) Outer frame ( 38.50mm x 33mm, 3mm 2 ( 1.80 + 1.30 )
thick )
6.20 RM @ 0.775 Kgs / RM 4.81 Kgs.
2) Mullions[59mm (3mm) x 33mm (2.50mm) x 2 x 1.30
30mm (3mm) ] 2.60 RM @ 1.123 Kgs / RM 2.92 Kgs.
3) Shutters Z Section (38.50mm x 33mm x 3x2(0.60 +1.30)
3mm thick = 11.40 RM @ 0.663 Kgs/ RM 7.56 Kgs.
4) Glazing clips 3x2(0.60+1.30)
= 11.40 RM @ 0.101 Kgs /RM 1.15 Kgs.
16.44 Kgs.
Cost analysis
Cost of powder coated Al. sections TBSC- 16.44 Kgs. 332.00 1 Kgs. 5458.08
R.I-03
103 Supply and fixing powder coated alimunium fully glazed top hung ventilators fixed with
5mm
Quantitythickanalysis
plain glass using suitable alluminium glazing clips and
Size : 0.90mx rubber beading as 0.45
0.50m per sqm
1) Outer frame ( 38.50mm x 33mm, 3mm 2 ( 0.90 + 0.50 )
thick )
= 2.80 RM @ 0.775 Kgs / 2.17 Kgs.
2) Shutters Z Section (38.50mm x 33mm x RM
2x2(0.45+0.50)
3mm thick = 3.80 RM @ 0.663 Kgs / 2.52 Kgs.
3) Glazing clips RM
2x2(0.45+0.50)
= 3.80 RM @ 0.101 Kgs 0.38 Kgs.
/RM. 5.07 Kgs.
Cost analysis
Cost of powder coated Al. sections TBSC- 5.07 Kgs. 332.00 1 Kgs. 1683.24
R.I-03
Cost of 5mm thick plain glass 0.45 sq.m. 568.00 1 sq.m. 255.60
TBSC-F.I-02
Cost of rubber beading 3.80 RM 5.00 1 RM 19.00
TBSC-R.I-11
Labour charges 0.45 Sqm. 949.80 1 Sqm. 427.41
105 Supply and fixing powder coated alimunium sliding window with fixed fan light at top as
per approved
and fixing 5mmdrawings with
thick plain all required
glass accessories
in fan light and 5mm such as stoppers,bolts,weather
thick ground stripping
glass for shutters fitted with
alluminium glazing clips and rubber beading, powderSize
Quantity analysis coating of all
: 1.20m alluminium sections 25mm
x 1.80m 2.16 Sqm
Quantity analysis
Window frame
Cost analysis
A.Material :
Cost of powder coated Al. sections 14.000 Kgs. 332.00 1 Kgs. 4648.00
Cost of 5mm thick plain glass TBSC-F.I- 2.16 sqm. 568.00 1 sqm. 1226.88
02
Cost of rubber beading TBSC- 6.00 RM 5.00 1 RM 30.00
R.I-11
B.Labour charges 2.16 sqm 913.97 1 sqm 1974.17
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 2.16 Sqm: 7879.05
Overheads & Contractors Profit @ 13.615% 0.13615 7879.05 1072.73
8951.78
Rate per 1 Sqm 4144.34
Or Say 4144
101 Supply and fixing of Cement Bonded Prelaminated Particle Board aluminum glazed partitions using
10mm Cement Bonded Prelaminated Particle Board and 5.00mm thick plain glass to full height. Using with
Cement Bonded Prelaminated Particle Board to a height of 0.91 meter at bottom panel and remaining
height with glass and aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x
62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides
including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all
materials etc., complete as directed during execution including overheads & contractors profit etc.,
complete for finished item of work.
Rate as per SoR TBSC-N.I-04 1.00 Sqm 3756.00 1.00 Sqm 3756.00
Deduct Cost of 5mm thick plain glass TBSC- -1.00 Sqm 568.00 1 Sqm -568.00
F.I-02
Add Cost of 4mm thick plain glass TBSC-F.II-01 1.00 Sqm 336.00 1 Sqm 336.00
3524.00
Overheads & Contractors Profit @ 13.615% 0.13615 3524.00 479.79
Rate for 1 Sqm 4003.79
Or Say 4004
103 Supplying and fixing of Two shutters cupboards as per drawing with medium teak wood frames of size
75mm x 40mm section with 2 Nos styles and 3 Nos rails at top, bottom and Middle rails and shutters of
MDF Board Interior grade both sides laminated 18mm thick of 4Nos shutters size each of 0.987 x 0.7 m
with 18mm x 12mm alround teak wood beading to each shutter including fixtures like Piano Hinges each
shutter of length 4 Nos 0.987m Powder coated Mild steel as per IS-3818 : 1992 of nominal size 25mm (B)
of thickness 0.8 to 1.0 mm, 2 no's Stainless Steel Tower Bolt-10 mm Bolt (IS:15833) 100 mm Long, 4 Nos
of Stainless Steel Door Handles 100 mm Long and standard cup board locks 2Nos, and magnets catche'rs
4Nos for shutters including cost and conveyance of all materials to site, labour charges, over heads and
contractor profit etc., complete for finished item of work.
2 27.00 Nos Supplying and fixing of Hose Cabinet of size 750mm X Each 5828.00
600mm x 250mm made of No 16 gauge SWG
CRCA sheet with 6mm thick glazed glass door
including necessary locking arrangement suitable to
accommodate 2 Nos 15 mtr long Hose pipe, 1 No
branch pipe, mounted on wall OR raised brick platform
and duly painted with Post office red externally and
white internally with synthetic enamel paint
complete in all respect, for external hydrant as
required.
Make: Mini Max / Safex / Newage / Winco / Padmini.
3 54.00 Nos Supply and fixing 63mm dia, 15 mtr long RRL hose Each 6397.00
pipe with 63mm dia Male and Female Gun metal / SS
couplings duly binded with GI wire, rivets etc
conforming to IS 636 (Type -A) as required. Make:
Mini Max / Safex / Newage / Winco / Newtech /
Padmini.
4 27.00 Nos Supply and fixing 63mm dia Gun metal branch pipe Each 2749.00
with 20mm (Nominal internal diameter) size Gun metal
conforming to IS 903, suitable for instantaneous
connection to interconnect hose pipe coupling as
required.
Make : Mini Max / Safex / Newage / Winco / Newtech /
Padmini.
10 350.00 Kgs Supply, fabricating , installing structural steel supports EACH 134.00
for fixing all sizes of MS pipes from ceiling / wall with Kg
MS Channels, Angles, Flats, Rods, as required at site
with anchor fasteners, Clamps, threaded rods, nuts,
bolts,washers etc complete with painting
Sprinkler Sytem
11 Supply, Transportation, laying, testing &
commissioning following of 'B' class heavy duty MS
pipe conforming to IS 3589/IS 1239 including Welding,
fittings like elbows, tees, flanges, tapers, nuts bolts,
gaskets etc. and fixing the pipe on the wall/ceiling with
suitable clamp/support frame and painting with two or
more coats of synthetic enamel paint of required
shade complete as required
Makes : Jindal / Hissar / Tata pipes
13 2000.00 KGS Supply, fabricating , installing structural steel supports KGS 134.00
for fixing all sizes of MS pipes from ceiling / wall with
MS Channels, Angles, Flats, Rods, as required at site
with anchor fasteners, Clamps, threaded rods, nuts,
bolts,washers etc complete with painting
16 13.00 EACH Supply and fixing Flow Switches in 150 mmdia MS EACH 8351.00
pipe.
Makes : System Sensor / Switzer
ADDRESSIBLE SYSTEM
11 720.00 Nos Supply and instllation of UL approved intellegent Each 3821.00
analogue addressable photo electric smoke detector
including cost of base plate etc., complete as per
specification with required fittings and accessories.
Makes: Notifier / Edwards / Honeywell / Morley IAS /
Bosch / cooper.
12 120.00 Nos Supply and installation of response indicators for Each 170.00
above false ceiling detectors.
Makes: System Censor / Ravel / Vertex / Seaara
19 36.00 Nos Supply and fixing of addressable wall mounting Each 4233.00
strobes cum hooters including the cost of mounting
accessories complete as per specifications and as
required including testing and
commissioning.
Makes: Siemens / Morley IAS / Bosch / Ravel /
Honeywell / cooper
20 1008.00 One Supply and Run of 2 Core x 1.5Sqmm FRLS ONE RM 120.00
RM armoured copper cable on ceiling / wall as per IS.
7098 / Part-I / 1988 including all taxes etc., complete.
Makes: Finolex / RR kabel / Havells / Polycab / RPG /
KEI / V-Guard.
E FIRE EXTINGUISHERS
21 20.00 Nos Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Each 9538.00
Trolley Mounted, Easy Weight Management, Used
Unused Mechanism, Squeeze Grip, Gross Weight
19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM,
Diameter 140MM, Discharge time minimum 13 Secs,
Controllable discharge mechanism, Range minimum 2
Meters, Applicable on Class B,C & electrically started
Fire, B Rating 13B, Can Construction : Hot Spinning /
Forging, Valve Construction : Forging & Machining,
Internal Coating of Can : Not Applicable, External
Coating of Can : Spray Painting, Sheet metal
thickness : 4.5MM, ISI & CE Approved, 2 Year
Warranty Including transportation, all taxes and all
labour charges etc complete.
Makes : Safex / Kenex / Bharat / Reliance
23 195.00 Nos Supply and fixing of ABC stored pressure squeeze Each 6853.00
grip type fire extinguishers, 9 kg capacity, IS:15683 :
2006, filled with ABC Mono Ammonium Phosphate
base powder 90 complete with discharge hose and
wall mounting bracket, 2mm Mild Steel, EPDM
Rubbers, Pressure Guage, which work effectively on
all class of fires (A, B, C & Electrical fires) with 5 years
warranty Including transportation, all taxes and all
labour charges etc complete
F SIGNAGE BOARDS
24 36.00 Nos Supply and fixing of Escape signage boards in Rigid Each 1516.00
Photo luminecent based glow in Dark rigid sheet with
high intensity luminous properties with specificaiton of
Cease Fire or its equivalent
Make Model-1ES01
H TERRACE FLOOR
25 Supply, Transportation, laying, testing &
commissioning following of 'B' class heavy duty MS
pipe conforming to IS 3589/IS 1239 including Welding,
fittings like elbows, tees, flanges, tapers, nuts bolts,
gaskets etc. and fixing the pipe on the wall/ceiling with
suitable clamp/support frame and painting with two or
more coats of synthetic enamel paint of required
shade complete as required
Makes : Jindal / Hissar / Tata pipes
b) 48.00 Rms 100 mm dia Two Way Fire Brigade risers ONE RM 1802.00
30 1.00 Nos Supply and fixing 2 way fire brigade connection of cast Each 7158.00
iron body with 2 Nos Gun metal Male instantaneous
inlet couplings complete with cap and chain as
required for 100mm dia MS pipe connection,
conforming to IS 904 as required.
Make: Mini Max / Safex / Newage / Winco / Padmini.
Pump Room
35 1.00 Supply and fixing of Pressure Switch in the MS pipe Each 2982.00
Line including connection etc as required.
Make : Danfoss / Indfoss
38 1.00 Supply and fixing Flow Switches in 150 mmdia MS Each 8351.00
pipe.
Makes : System Sensor / Switzer
42 1.00 Supply and fixing 2 way fire brigade connection of cast EACH 7158.00
iron body with 2 Nos Gun metal Male instantaneous
inlet couplings complete with cap and chain as
required for 100mm dia MS pipe connection,
conforming to IS 904 as required.
Make: Mini Max / Safex / Newage / Winco / Padmini.
43 1.00 Supply and fixing 4 way fire brigade connection of cast EACH 9544.00
iron body with 2 Nos Gun metal Male instantaneous
inlet couplings complete with cap and chain as
required for 100mm dia MS pipe connection,
conforming to IS 904 as required.
Make: Mini Max / Safex / Newage / Winco / Padmini.
246321
157356
345438
74223
180200
52880
16600
150147
39474
46900
199875
180200
224740
175780
365850
338400
712600
1660000
268000
92612
81300
108563
2751120
20400
548760
1234800
61166
196350
152388
120960
190760
1336335
54576
266500
86496
7124
11122
22396
14997
159402
7158
734294
512176.00
2982.00
787.00
1524.00
8351.00
533000
360400
61560
7158
9544
157500
14997
7124
411645
227435
224960
22500
31000
18815842.00
2 2 x 4 Oxygen Emergency Manifold with 19 mm O.D x12 mm 1Set 1.00 45300.00 45300
ID Copper Pipe mounted on Top Frame, Middle Frame and
Bottom Frame, along with brass blocks,NRVs/Cylinder
Valves and Pigtail Pipes of 1 mtr long of size 8 mm O.D x 3
mm I.D,duly tested at 250 Kg/Cm2 pressure.
4 2 x 2 Nitrous Oxide Emergency Manifold with Heavy Duty 1Set 1.00 32700.00 32700
with 19 mm O.D x12 mm ID Copper Pipe mounted on Top
Frame, Middle Frame and Bottom Frame, along with brass
blocks,NRVs/Cylinder Valves and Pigtail Pipes of 1 mtr long
of size 8 mm O.D x 3 mm I.D,duly tested at 250 Kg/Cm2
pressure.
C VACUUM SYSTEM
5 2 nos. of Ingersoll Rand make Model 10V x 10 Model with 10 1Set 1.00 941640.00 941640
HP Motor with 1500 litres Receiver, Filters, Electricals etc.
Secretion Trap and bacteria filter.
8 Supply and fixing of Copper Pipe Lines of 15 mm dia. 0.9 2100 2100 616.00 1293600
mm thick for distribution, pipes shall be half drawn, Mtrs
tempered, seamless,phosphorous deoxidized, non arsenic
and dereased confirming to BS 2871-1971 Part-1 (Table-X)
and the chemical compositions shall be as per BS 6017 of
1981 table-2, including cost with Lloyd Test Certification and
conveyance of pipes, necessary specials, made of copper
and suitable for a steam working pressure of 17 bar and
should confirm to BS 864 with specially made for brazed
socket type connections, including taxes, transportation
charges, including laying and jointing, testing, commissioning
and all other labour charges etc. complete for finished item
of work
15mm O.D x0.9mm thick copper pipe
9 Supply and fixing of Copper Pipe Lines of 22 mm dia. 0.9 2400Mtrs 2400 891.00 2138400
mm thick for distribution, pipes shall be half drawn,
tempered, seamless,phosphorous deoxidized, non arsenic
and dereased confirming to BS 2871-1971 Part-1 (Table-X)
and the chemical compositions shall be as per BS 6017 of
1981 table-2, with Lloyd Test Certification including cost and
conveyance of pipes, necessary specials made of copper
and suitable for a steam working pressure of 17 bar and
should confirm to BS 864 with specially made for brazed
socket type connections, including taxes, transportation
charges including laying and jointing, testing, commissioning
and all other labour charges etc. complete for finished item
of work
22mm O.D x0.9mm thick copper pipe
11 Supply and fixing of Copper Pipe Lines of 42 mm dia. 1.2 700 Mtrs 700 1793.00 1255100
mm thick for distribution, pipes shall be half drawn,
tempered, seamless,phosphorous deoxidized, non arsenic
and dereased confirming to BS 2871-1971 Part-1 (Table-X)
and the chemical compositions shall be as per BS 6017 of
1981 table-2, including cost and conveyance of pipes,
necessary specials made of copper and suitable for a
steam working pressure of 17 bar and should confirm to BS
864 with specially made for brazed socket type connections,
including taxes, transportation charges including laying and
jointing, testing, commissioning and all other labour charges
etc. complete for finished item of work
42mm O.Dx1.2mm thick copper pipe
12 Supply and fixing of Copper Pipe Lines of 54 mm dia. 1.2 400 Mtrs 400 2520.00 1008000
mm thick for distribution, pipes shall be half drawn,
tempered, seamless,phosphorous deoxidized, non arsenic
and dereased confirming to BS 2871-1971 Part-1 (Table-X)
and the chemical compositions shall be as per BS 6017 of
1981 table-2, including cost and conveyance of pipes,
necessary specials made of copper and suitable for a
steam working pressure of 17 bar and should confirm to BS
864 with specially made for brazed socket type connections,
including taxes, transportation charges including laying and
jointing, testing, commissioning and all other labour charges
etc. complete for finished item of work
54mm O.Dx1.2mm thick copper pipe
B Isolation Valves
13 Supply and fixing of 15 mm dia. Isolation Valves with 22Nos 22.00 1450.00 31900
necessary end fittings designed for a working pressure of
300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated
with 90 degrees turn, Hand lever operated of standard make
of valves including cost and conveyance of all mateials,
taxes, transportation chrges, fixing charges and testing
charges and all labour charges etc. comlete for finished item
of work.
15 mm Valves
14 Supply and fixing of 22 mm dia. Isolation Valves with 45 Nos 45.00 2050.00 92250
necessary end fittings designed for a working pressure of
300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated
with 90 degrees turn, Hand lever operated of standard make
of valves including cost and conveyance of all mateials,
taxes, transportation chrges, fixing charges and testing
charges and all labour charges etc. comlete for finished item
of work.
22 mm Valves
15 Supply and fixing of 28 mm dia. Isolation Valves with 30 Nos 30.00 3275.00 98250
necessary end fittings designed for a working pressure of
300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated
with 90 degrees turn, Hand lever operated of standard make
of valves including cost and conveyance of all mateials,
taxes, transportation chrges, fixing charges and testing
charges and all labour charges etc. comlete for finished item
of work.
28 mm Valves
16 Supply and fixing of 54 mm dia. Isolation Valves with 14 Nos 14 5000.00 70000
necessary end fittings designed for a working pressure of
300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated
with 90 degrees turn, Hand lever operated of standard make
of valves including cost and conveyance of all mateials,
taxes, transportation chrges, fixing charges and testing
charges and all labour charges etc. comlete for finished item
of work.
54 mm Valves
F GAS OUTLETS
H ACCESSORIES
19 Oxygen Flow meters with Humidifer Bottles 470 Nos 470 1350.00 634500
20 Ward Vacuum Units with 600 ml Jar 200Nos 200 1714.00 342800
21 Vacuum Tube 200 Mtr 200 70.00 14000
22 High Pressure Tube 100 Mtr 100 97.00 9700
24 CO2 SYSTEM
4 + 4 size of CO2 manifold complete with 8 nos. pig tail 1Set 1.00 24,000.00 24000.00
pipes CE Certified as per specifications
2 cylinder emergency manifold CE Certified as per 1 Set 1.00 8,500.00 8500.00
specifications
Fully Automatic CO2 Control System ( Improted for 1Set 1.00 425,000.00 425000.00
Oxygen as technical specifications. NFPA-99 (imported)
TOTAL 15670089.00
2 Plain Cement Concrete (1:5:10) (cement: fine 31.00 CUM ONE CUM 4463.00
aggregate: Coarse aggregate) for foundations and
under flooring bed using coarse aggregate 40mm
size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all
materials like cement, sand, coarse aggregate, water
etc. to site including all charges for machine mixing
and hire charges of concrete mixer, laying concrete in
foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
3 Supply and placing of the Design Mix Concrete M 42.00 Cum ONE Cum 10816.00
25 grade corresponding to IS 456 with minimum
cement content of 380 kgs per 1 cum of concrete
using batching and mixing plant of 15 cum per hour
capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383
- 1970 and IS 2386 Part 1 to Part 8) from approved
quarry including cost and conveyance of all materials
like cement, fine aggregate (sand) coarse aggregate,
water etc., to site and sales & other taxes on all
materials , centering using Steel scaffolding pipes ,
jack props , wallers , Foot plates , brackets , steel
centering plates etc., including all operational,
incidental and labour charges such as weigh
batching, machine mixing, laying concrete, curing
etc., and overheads & contractors profit complete but
excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402).
ii 100mm thick Drain side walls 275.00 SQM ONE SQM 2351.00
ii 125mm thick Drain side walls 316.00 SQM ONE SQM 2603.00
5 Reinforced Cement Concrete M 20 nominal mix 255.00 SQM ONE SQM 1352.00
using 12mm size hard granite machine crushed
graded metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved
quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer
10 / 7 cft (0.2 / 0.8 cum) capacity including cost and
conveyance of all materials like cement, fine
aggregate (Sand), coarse aggregate, water etc., to
site including centering, shuttering, labour charges
such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift
charges, curing etc., and overheads & contractors
profit complete for finished item of work (APSS No.
402 & 403) for 125mm thick precast slabs.
Amount
(Rs.)
47124
138353
454272
646525
822548
344760
734496
3364444.00
1 452.00 SD4
2 50.00 SD3
a SD3
2 80.00 160.00
1 52.00 52.00
212.00
Say 212.00 RM
b SD4
1 75.00 75.00
75.00
Say 75.00 RM
1 Earth work excavation
2 PCC(1:5:10)
SD2 1 250.000 0.650 0.075 12.188
SD3 1 212.000 0.800 0.075 12.720
SD4 1 75.000 1.150 0.075 6.469
31.376
Say 31.00 Cum
3 RCC M25 grade
Drain bottom
SD2 1 250.000 0.650 0.100 16.250
SD3 1 212.000 0.850 0.100 18.020
SD4 1 75.000 1.000 0.100 7.500
41.770
Say 42.00 Cum
1 Earthwork excavation for road way in soils upto 1473.00 CUM ONE CUM 53.00 78069
SDR by mechanical means including trimming
bottom and side slopes in accordance with
requirements of lines , grades and cross sections
etc., complete for finished item of work for trench
cutting as per MoRT&H specification 301(5th
revision) and as directed by the Engineer-in-
Charge
2 Construction of earthened road by forming Sub 510.00 CUM ONE CUM 387.00 197370
grade with approved material obtained from
borrow pits with an extra lead of 10KM having CBR
more than 10, with all lifts and leads transporting to
site, spreading, grading to required slope and
compacted , removal of top soil, excavation of soils
at borrowed area, conveyance of soil, depositing
the soil , spreading soil, breaking clods, sectioning,
grading and consolidation with 8 to 10 Tonnes
Vibratory Road Roller @ OMC to meet requirement
of table 300-2 of MoRT&H, including all hire and
operational charges of T&P charges, complete for
finished item of work as per MoRT&H specification
305 (5th Revision)
2 Construction of Granular sub-base by providing 510.00 CUM ONE CUM 2395.00 1221450
HBG material confirming to Grading - VI of
MoRT&H Table 400-1 including cost, (excluding
seigniorage) charges and conveyance of all
materials to work site and spreading in uniform
layers with motor grader or by approved means,
on prepared surface mixing by mix in place method
with Rotavator / approved means at OMC and
compacting with vibratory roller to achieve the
desired density etc., complete for finished item of
work as per MoRT&H Specification 401 (5th
revision) and as directed by the Engineer-in-
charge. ( Payment will be made based on levels
for finished item of work ).
4 Plain Cement Concrete (1:5:10) (cement: fine 51.00 CUM ONE CUM 4463.00 227613
aggregate: Coarse aggregate) for foundations and
under flooring bed using coarse aggregate 40mm
size hard , machine crushed granite from
approved quarry including cost and conveyance of
all materials like cement, sand, coarse aggregate,
water etc. to site, sales & other taxes on all
materials and including all charges for machine
mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top
surface to the required level curing etc.,and
overheads & contractors profit complete for
finished item of work. (APSS No. 402)
5 Plain Cement Concrete M 20 design mix using 132.00 CUM ONE CUM 6290.00 830280
WEIGH BATCHER / MIXER, 20mm size hard
granite machine crushed graded metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part
1 to Part 8) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum
of concrete including cost and conveyance of all
materials like cement, fine aggregate (Sand),
coarse aggregate, water etc., to site including steel
centering, shuttering, machine mixing, lift charges,
laying concrete,vibrating, curing, overheads &
contrctors profit etc., complete for finished item of
work (APSS No. 402 & 403) for Kerb stone.
7 Flooring with chequered cement concrete 678.00 SQM ONE SQM 827.00 560706
heavy duty tiles confirming to IS:13801 using
aggregates, cement, pigments of size 300mm x
300mm and thickness 25mm of any shade as
approved by Engineer-In-Charge set over base
coat of cement mortar (1:6), 12 mm thick using
screened sand over CC bed alredy laid or RCC
roof slab including neat cement slurry of honey like
consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with
pigment of matching shade including cost and
conveyance of all materials like cement, sand,
water and tiles etc.,and overheads & contractors
profit complete for finished item of work.
8 Construction of un-reinforced, dowel jointed at 680.00 CUM ONE CUM 7123.00 4843640
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over
a prepared sub base, with 43 grade cement or any
other type as per Clause 1501.2.2 M30 (Grade),
coarse and fine aggregates conforming to IS : 383,
maximum in a concrete mixer of not less than 0.2
cum capacity and appropeiate weigh batcher using
approved mix design, laid in approved fixed side
formwork (steel channel, laying and fixing of 125
mictron thick polythene film, wedges, steel plates
including levelling the formwork as per drawing),
spreading the concrete with sholvels, rakes,
compacted using needle, scareed and plate
vibrators and finished in continuous operation
including provision of contraction and expansion,
construction joints, applying debonding strips,
primer, sealant, dowel bars, near approaches to
bridge / culvert and construction joints, admixtures
as approved, curing of concrete slabs for 14- days,
curing compound (where specified) and water
finishing to lines and grade as per drawing and
Technical Specification Clause 1501 MORD.
9 Painting two coats with synthetic enamel paint 202.00 SQM ONE SQM 115.00 23230
Grade-II VOC (Volatile Organic Compound)
content less than 50 grams/litre to new iron work
including cost and conveyance of all materials to
site, sales & other taxes, incidental, operational
and all labour charges etc., and overheads &
contractors profit complete for finished item of work
in all floors. (SS No. 1201, 1212 & 1207).
EXTERNAL WATERSUPPLY
2 Plain Cement Concrete (1:4:8) (cement: fine aggregate: 55.00 Cum 4654.00 255970.00
Coarse aggregate) for foundations using coarse aggregate
40mm size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site including
all charges for machine mixing and hire charges of concrete
mixer, laying concrete in foundations and under flooring
bed, ramming in 15 cm layers finishing top surface to the
required level curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
3 Supply, Fixing & Delivery of HDPE Pipes are conforming to 420.00 RM 1188.00 498960.00
IS 14333 -2000 for using underground water supply e
systems including transportation to anywhere in site ,
excluding all taxes (Supply up to 90 mm draincoil & above
90 mm dia. straight length)overheads & contractors profit
complete for finished item of work. For 160 mm Dia(OD)
HDPE - PE 100 8.00 KG/CM2
4 Supply, Fixing & Delivery of HDPE Pipes are conforming to 1192.00 RM 615.00 733080.00
IS 14333 -2000 for using underground drainage and
sewerage systems including
transportation to anywhere in site excluding all taxes
(Supply up to 90 mm draincoil & above 90 mm dia. straight
length)overheads & contractors profit complete for finished
item of work. For 110 mm DiaHDPE - PE 100 8.00 KG/CM2
5 Supply, Fixing & Delivery of HDPE Pipes are conforming to 165.00 RM 442.00 72930.00
IS 14333 -2000 for using underground drainage and
sewerage systems including
transportation to anywhere in site, excluding all taxes
(Supply up to 90 mm draincoil & above 90 mm dia. straight
length)overheads & contractors profit complete for finished
item of work. For 90 mm Dia
7 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or 120.00 RM 682.00 81840.00
equivalent UPVC Pipes and Fittings SCH-40 Grade to meet
the requirement of ASTM-D 2846 for hot and cold water (IS
15778:2007) including cost and conveyance of all materials
to site, labour charges for fixing, overheads & contractors
profit complete for finished item of work at all floor levels..
For 65 mm Dia For Risers
8 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or 300.00 RM 909.00 272700.00
equivalent UPVC Pipes and Fittings SCH-40 Grade to meet
the requirement of ASTM-D 2846 for hot and cold water (IS
15778:2007) including cost and conveyance of all materials
to site, labour charges for fixing, overheads & contractors
profit complete for finished item of work at all floor levelss.
For 80 mm Dia For Risers
7 Vibrated Plain Cement Concrete (1:3:6) nominal mix using 11.00 CUM 6006.00 66066.00
40mm size machine crushed hard granite metal and 20mm
graded machine crushed hard granite metal (coarse
aggregate) in (2:1) ratio from approved quarry including
cost and conveyance of all materials like cement, fine
aggregate (sand), coarse aggregate, water etc. to site, sales &
other taxes except GST on all materials, all charges for
mixing, laying concrete in position, vibrating, curing,
centering charges, overheads & contractors profit etc.,for
finished item of work for footings and basement. for Thrust
Block
8 Filling with useful available excavated earth by manual 69.00 Cum 209.00 14421.00
means (excluding rock) in trenches, sides of foundations
and basement with initial lead in layers not exceeding
15 cm thick, consolidating each deposited layer by
watering and ramming including cost and conveyance of
water to work site and all operational, incidental,
labour charges, hire charges of T & P etc., and overheads
& contractors profit complete for finished item of work.
(APSS NO. 309 & 310)
11 Manufacture,supply and delivery of cast carban steel 4.00 EACH 22243.00 88972.00
rising/Non raising spindle sluice valves design standard as
per IS:14846/2000 for water supply scheme with ss spindle
& ss working parts the grade of cast steel for body Bonnet,
Dome,Stool cover, Wedge Stuffing box, gland Thrust Plate,
Shall be as per IS:1030/1989.(The valve shall be used for
High presure schmes &pumping stations) excluding
transporation, Central exise duty and sale tax etc., complete.
ISI Marked for 150mm dia
12 Manfacture, Supply and delivery of Cast Carbon Steel Bolted 3.00 EACH 18823.00 56469.00
Cover Non Return Valve as per IS:5312/Part 1/1984.Round
body heavy duty material spec. As per IS:1030/1989 with SS
Hinge &Seat Rings.including transporation, Central Exercise
duty and sale tax etc., complete
13 Manfacture, Supply and delivery of Cast Carbon Steel Bolted 3.00 EACH 25887.00 77661.00
Cover Non Return Valve as per IS:5312/Part 1/1984.Round
body heavy duty material spec. As per IS:1030/1989 with SS
Hinge &Seat Rings.including transporation, Central Exercise
duty and sale tax etc., complete
14 Manufacture, Supply and delivery of DI D/F Butterfly 6.00 EACH 10046.00 60276.00
Valves with GGG40/SG 400/12 or Equivalent grade as per
I.S.3896-part 2-1985 and subsequent revisions, Double
eccentrically Disc., with renewable soft seal on the disc and
Body seat face of stainless steel / nickel weld overlay, with
powder or liquid Epoxy coating with minimum thickness of
250 microns applied on both body and disc inside and
outside. Face to face dimensions as per AWWA C 504 or BS
5155 or IS:13095. Drilled as per IS: 1538/ISO
2602205.00
2602205.00
2 100 mm Diameter
Sump to Hospital 1 250.000 250.00
Add for variations 12.50
262.50
SAY 263.00 RM
3 100 mm Diameter ( Municipal
Water )
From Mechine Bhagiradha line
125
to site
SAY 125.00 RM
4 Flush water
100mmø Pipe
From STP to Hospital building 1 180.000 180.00
180.00
Say 180.00 RM
5 90mmø Pipe
From STP to Hospital building 2 75.000 150.00
150.00
Say 150.00 RM
6 75mmø Pipe
From STP to Hospital 2 85.000 170.00
Add for variations 17.00
187.00
Say 187.00 RM
7 Earth work Excavation
Domestic water &Flush water
150 mm dia 1.0 315.00 0.30 2.000 189.00
100 mm dia 1.0 567.50 0.30 2.000 340.50
90 mm dia 1.0 150.00 0.30 2.000 90.00
75 mm dia 1.0 187.00 0.30 2.000 112.20
731.70
Say 732.00 CUM
8 PCC (1;4:8)
150 mm dia 1.0 315.00 0.30 0.15 14.18
9 150mmø Pipe
External out side to sump 1 400.000 400.00
400.00
Add for variations 20.00
420.00
SAY 420.00 RM
10 100mm Dia
100mmø Pipe
Sump to Hospital 1 758.000 758.00
From Mechine Bhagiradha line
125
to site
From STP to Hospital building 1 200.000 200.00
1083.00
Add for variations 108.30
1191.30
Say 1192.00 RM
11 90mmø Pipe
From STP to Hospital building 1 150.000 150.00
150.00
Add for variations 15.00
165.00
SAY 165.00 RM
12 75mmø Pipe
From STP to Hospital 1 187.000 187.00
187.00
SAY 187.00 RM
13 Manufacture,supply and delivery of cast carban steel rising/Non raising spindle sluice valves
design standard as per IS:14846/2000 for water supply scheme with ss spindle & ss working parts
the grade of cast steel for body Bonnet, Dome,Stool cover, Wedge Stuffing box, gland Thrust
Plate, Shall be as per IS:1030/1989.(The valve shall be used for High presure schmes &pumping
stations) excluding transporation, Central exise duty and sale tax etc., complete. ISI Marked
14 Manfacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per
IS:5312/Part 1/1984.Round body heavy duty material spec. As per IS:1030/1989 with SS Hinge
&Seat Rings.including transporation, Central Exercise duty and sale tax etc., complete
15 Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG40/SG 400/12 or
Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically
Disc., with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld
overlay, with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on
both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155
or IS:13095. Drilled as per IS: 1538/ISO
16 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR
11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to
2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site,
labour charges for fixing, overheads & contractors profit complete for finished item of work at all
floor levels.
4 30.00 120.00
120.00
SAY 120.00 RM
17 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent UPVC Pipes and Fittings SCH-
40 Grade to meet the requirement of ASTM-D 2846 for hot and cold water (IS 15778:2007)
including cost and conveyance of all materials to site, labour charges for fixing, overheads &
contractors profit complete for finished item of work at all floor levels.
6 50.00 300.00
300.00
SAY 300.00 RM
663.16
19 Plain Cement Concrete (1:2:4) (cement: fine aggregate: Coarse aggregate) for
foundations and under flooring bed using coarse aggregate 40mm size hard , machine
crushed granite from approved quarry including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site, including sales & other taxes
exceluding GST on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top
surface to the required level curing etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402) for Thrust Block