Professional Documents
Culture Documents
8.) Determine the reaction between cylinder B and the vertical wall.
a. 75 lb c. 96.50 lb
b. 80 lb d. 126.50 lb
9.) Determine the reaction between cylinder A and the vertical wall.
a. 75 lb c. 96.50 lb
b. 80.lb d. 126.50 lb
4.) Determine the minimum value of distance d to create the specified
moment about Point D. SITt. 6. Knowing that 𝛼 = 20°
a. 411.51 mm c. 715.19 mm
b. 114.51 mm d. 517.19 mm
18.) Determine the magnitude of the smallest force P for which the
resultant of two forces applied at A is vertical
a. 386 lb c. 231 lb
12.) Determine the tension in cable ADB. b. 321 lb d. 368 lb
a. 260 N c. 224 N 19.) Determine the magnitude of the resultant force if force P is at its
b. 112 N d. 130 N smallest possible.
13.) Determine the reaction at C. a. 386 lb c. 213 lb
a. 260 N c. 224 N b. 321 lb d. 368 lb
b. 112 N d. 130 N
14.) Determine the direction angle of the reaction at C. SIT. 11. The tailgate of a car is supported by the hydraulic lift BC. If the
a. 2.05° c. 78.95° lift exerts a 125-lb force directed along its centerline on the ball and
b. 87.95° d. 11.05° socket at B,
15.) Determine the magnitude of force P so that the resultant is a 20.) Determine the moment of the force about A.
vertical force of 2500N. a. 116.16 lb-ft c. 176.91 lb-ft
a. 2600 N c. 2800 N b. 128.00 lb-ft d. 184.91 lb-ft
b. 2700 N d. 2900 N
16.) Determine the direction angle of of force P so that the resultant is SIT. 12. For the given coplanar force system which consists of two forces
and one couple.
a vertical force.
a. 36.5° c. 26.5°
b. 63.5° d. 53.5°
SIT. 17. The post is to be pulled out of the ground using two ropes A and
B. Rope A is subjected to a force of 600 lb and is directed at 60° from
the horizontal. The resultant force acting on the post is to be 1200 lb,
vertically upward.
SIT. 18. A 150kg. man stands on the middle rung of a 50kg ladder as
shown. Assuming the floor and wall are perfectly smooth and that the
slipping is prevented by a string DE
Sit. 1. Under cruising conditions the distributed load acting on the wing
of a small airplane has the idealized variation shown in the figure
10.) Determine the magnitude of the smallest force P for which the
resultant of two forces applied at A is vertical
a. 386 lb c. 213 lb
3.) Determine the normal force between the bar and the smooth b. 321 lb d. 368 lb
surface at A. 11.) Determine the magnitude of the resultant force if force P is at its
a.) 911.75 N c.) 212.13 N smallest possible.
b.) 204.90 N d.) 943.92 N a. 386 lb c. 213 lb
4.) Determine the distance “x” before motion impends. b. 321 lb d. 368 lb
a.) 1.07 m c.) 4.07 m
Sit. 7. A 150kg. man stands on the middle rung of a 50kg ladder as
b.) 3.50 m d.) 5.60 m
shown. Assuming the floor and wall are perfectly smooth and that the
slipping is prevented by a string DE
Sit. 3. At full draw, an archer applies a pull of 130 N to the bowstring of
the bow shown in the figure.
Sit. 14. For the given coplanar force system which consists of two forces
and one couple.
Sit. 11. The plate is subjected to the two forces at A and B as shown.
28.) Determine the resultant of the set of forces.
a. 36.60 kN c. 47.80 kN
b. 51.50 kN d. 74.50 kN
29.) Determine the angle that the resultant makes with the x-axis.
a. 44.71° c. 71.44°
b. 45.29° d. 18.56°
30.) Determine the resultant force couple system acting at A that will
replace all sets of forces.
a. 385.61 kN-m c. 248.92 kN-m
b. 487.17 kN-m d. 156.92 kN-m
Sit. 15. A force of 60kN is acting horizontally, then another force of 50kN
is acting upward to the right. If the resultant of these two forces is
95.4kN.
31.) At what angle does the resultant makes with the horizontal?
a. 27° c. 63°
b. 72° d. 36°
32.) At what angle does the 50kN force makes with the horizontal?
a. 30° c. 45°
b. 15° d. 60°
33.) Compute the horizontal component of the resultant?
a. 58kN c. 64kN
b. 85kN d. 46kN
SIT. 16. Three identical cylinders are stacked within a rigid bin as shown
in the figure. Weight of each cylinder is 500N. Assume all contact surface
are frictionless.
1. Which of the following most nearly gives the minimum Sit. 4. A propped cantilever beam shown in Figure is made of reinforced
thickness of B-1? concrete having a width of 290 mm overall depth of 490 mm. The beam
a. 397.14 mm c. 317.71 mm is loaded with uniform dead load of 35 kN/m (including its own weight),
b. 400.00 mm d. 500.00 mm and a uniform live load of 55 kN-m. Given 𝑓′𝑐 = 24 𝑀𝑃𝑎, 𝑓𝑦 = 415 𝑀𝑃𝑎.
2. Which of the following most nearly gives the minimum Concrete cover is 60 mm from the centroid of the bars.
thickness of B-2?
a. 226.94 mm c. 285.71 mm
b. 380.95 mm d. 302.59 mm
3. Which of the following most nearly gives the minimum
thickness of B-3?
a. 198.57 mm c. 257.61 mm
b. 145.77 mm d. 324.32 mm
Sit. 9. The strength of the materials used in the given section of the
beam shown are 𝑓′𝑐 = 20 𝑀𝑃𝑎 and 𝐹𝑦 = 415 𝑀𝑃𝑎. Using ultimate
strength design,
Sit. 7. The cross section of a beam is shown in the figure below. Using
𝑓′𝑐 = 3000 𝑝𝑠𝑖, normal weight of concrete, 𝑛 = 9, and 𝑀 = 250 𝑓𝑡 − 𝑘,
Sit. 13. A beam having a span of 12m shown in figure 13. carries a
concentrated load of 60kN at point B. Assuming EI is constant to be
50000 kN-m2.
Sit. 14. The beam is subjected to the load as shown in figure 6-a.
16. Find the distance x1 such that the tension in segment AB of the cable
is equal to that in segment BC.
a. 9m c. 12 m
b. 10 m d. 11 m
17. Calculate the tension in segment BC when 𝑥1 = 5𝑚.
4. Which of the following gives the reaction at the simply supported a. 206.56 kN c. 165.43 kN
end? b. 174.90 kN d. 187.92 kN
a. 5.25 kN c. 4.89 kN 18. What is the total length of the cable when 𝑥1 = 5𝑚
b. 7.50 kN d. 7.33 kN a. 20.13 m c. 21.12 m
5. Which of the following gives the angle of rotation at the simply b. 20.76 m d. 19.76 m
supported end? SIT. 7. Figure shown in figure is a semi-circular arch subjected to equal but
a. 30/EI c. 20/EI oppositely directed forces at A and B.
b. 10/EI d. 40/EI
6. Which of the following gives the moment at the fixed end?
a. 48 kN-m c. 36 kN-m
b. 54 kN-m d. 78 kN-m
SIT. 3. For the restrained beam shown below,