Professional Documents
Culture Documents
ME Thermodynamics II
“Theoretical and Software based calculations of Vortex Tube under given specified
conditions”
Marks: 10 CLOs: 1, 2 PLO: 2
Objectives
A vortex tube, also known as a Ranque-Hilsch vortex tube, is a mechanical device without moving parts
that separates a compressed gas into hot and cold streams. According
to a manufacturer's specifications, pressurized air enters a vortex tube
at a temperature of 30°C and a gauge pressure of 800 kPa. Cold air
exits the left side of the tube at a temperature of -10°C and at
atmospheric pressure. Hot air exits the right side of the tube at a
Figure 1: Vortex tube
temperature of 120°C and at atmospheric pressure. The ratio of mass
flow rate between the cold stream and the inlet stream is 0.70.
Are these specifications possible?
Sr. No Attributes
1 Depth of knowledge required
✓ Each student will have to prepare the draft of CEP including calculations, design parameters and
✓ CEP report/draft final submission and Viva date is last week of semester. Prepare well your report.
✓ Total marks of CEP will be 10 including 5 marks of report, and 5 marks of viva.
Notes
➢ The allowed submission file format is MS Word with no screenshots.
➢ All references should be added through EndNote.
➢ The late submissions will be penalized as a 10% marks deduction per day for up to three days.
➢ The submission after three days will not be considered. Resubmission is not allowed.
Good Luck!