Professional Documents
Culture Documents
Component
EB Number
First Issue Date
SCDLJ75-EB44-0271
25 April 2014
Transmittal Sheet
Revision No. 00
Revision Date
ATA System 44-20
PNR SCDLJ75-0469-C
Purpose
x LHT 21/G Production of new LHT Component
X LHT 145 Modification of used Component (LHT or other)
Revision History
IR
Revision Reason
Additional Distribution
Prepared Horstmann, M. HAM TX/O Phone 61683 Date/Signature Digitally Signed by:
Horstmann, Michael
Date:25-Apr-2014
Checked Steinberg, Sven HAM TX/O Phone 61681 Date/Signature Digitally signed by:
Steinberg, Sven
Date: 25.04.2014
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, Sys- Transmittal Sheet
tem Configuration Database Update, niceview3D opti-
mizations, and various improvements
Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, Sys-
tem Configuration Database Update, niceview3D opti-
Transmittal Sheet
mizations, and various improvements
Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Note
EB Number SCDLJ75-EB44-0271
Any use of the following informa-
First Issue Date 25 April 2014
tion being proprietary to Lufthansa
Revision No. 00 Technik AG is prohibited unless
Revision Date approved in writing.
ATA System 44-20
PNR SCDLJ75-0469-C
1. PLANNING INFORMATION
1.1 Effectivity
Learjet LJ75 , Cabin Management System (CMS) Configuration Database (CSDB),
a/c serialnumber (MSN):
45-469
1.4 Reason
This Component Engineering Bulletin (EBC) covers a software update for Learjet 75,
a/c MSN 45-469 based on a customer request for niceview 3D optimizations, and various improve-
ments.
1.5 Description
1.5.1 Description of Component
The Configuration Software Data Base (CSDB) contains software for the components within the nice
In-Flight Entertainment (IFE) and Cabin Management System (CMS). The following table provides an
overview on the LRUs affected by this EBC with their appropriate button on the Graphical User Inter-
face (GUI):
Overview of affected components
p/n * Name of LRU Button on GUI
BDP3009-001-001 BluRay Disc Player [media center]
DIS1010-001-001 Pop-up display RH-HD submenu in connecting LRU maintenance page
DIS1010-002-001 Pop-up display LH-HD submenu in connecting LRU maintenance page
EDU3009-001-001 Ethernet Decoder Unit [fwd bulkhead decoder]
* In this EBC, a shortend p/n (first seven characters) is used.
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
Overview of affected components (Continued)
p/n * Name of LRU Button on GUI
EEU0910-001-001 Ethernet Encoder Unit [iPod/hdmi encoder]
EIU3009-001-001 Ethernet Interface Unit [ethernet interface unit]
LCD1209-001-001 LCD 12" Monitor submenu in connecting LRU maintenance page
PCS3009-001-001 PCU Core Module II [pcu core seat 1, pcu core seat 2, pcu core seat 3,
pcu core seat 4, pcu core seat 5, pcu core seat 6,
pcu core seat 7, pcu core seat 8]
PSM2410-001-001 Passenger Control Unit dis- submenu in connecting LRU maintenance page
play-HD
* In this EBC, a shortend p/n (first seven characters) is used.
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 2
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
1.5.4 Peripheral System Connection
None.
1.5.5 Component / System Differences
niceview3D display behaviour improved.
1.6 Compliance
OPTIONAL: This modification is an optional change, to be accomplished by an authorised aircraft
maintenance station.
1.7 Approval
This design change is considered to be a minor change.
The design data contained in this document do not affect qualification of the component.
The software, contained in this component, is defined as Level "E" according to RTCA DO178B.
Therefore no further substantiation of compliance is required.
The technical content of this EBC must be reviewed and accepted by Learjet.
1.8 Manpower
It is estimated that 4 man-hours will be required to accomplish and test this modification.
1.11 References
- Bombardier Standard Practice Procedure Chapter 20.
- Lufthansa Technik Functional Procedure Description C-ABK766-UG-001 (Software Load Proce-
dure for niceHD on Learjet 70/75).
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 3
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
2. MATERIAL INFORMATION
For parts availability please contact:
Chris Reed
Logistics Agent Specialist
Email: chris.reed@aero.bombardier.com
Telephone: +1-316-946-7829
For further assistance please refer to LHT Customer Service Innovation:
Email: csi@lht.dlh.de
Telephone: +49-40-5070-63673
NOTE: #1: Software automatically gets overwritten with new software during installation.
Rev. Date:
Rev. Tag:
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 4
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
3. ACCOMPLISHMENT INSTRUCTIONS
This modification shall only be performed by an authorised aircraft maintenance station.
NOTE: All work (processes and procedures) described in this paragraph must be performed accord-
ing to Standards Manuals shown in section 1.11 "References".
NOTE: Do not remove power from the a/c or individual units if not required by the procedure. A loss
of power during the update procedure may result in a damaged LRU.
NOTE: Figures in this document do not reflect the current display on the main control panel (galley
control panel) and are intended as reference only.
3.1 General/Preparation
1. Gain access to the CMS maintenance panel (A5238) located in the flight deck center pedestal, aft
vertical surface
2. Power up the cabin and wait until the nice system is booted completely and the main control
panel (galley control panel) shows the main screen (refer to figure 1)
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 5
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
3.1.2 cms equipment page menu structure niceHD
1. Within the cms equipment page, navigate to item [system software] (displaying the current sys-
tem software p/n)
2. Insert the USB memory stick into the USB port on the CMS maintenance panel (A5238).
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 6
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
3. Wait for the [system software] item to display "update available" (refer to figure 3).
figure 3: "cms equipment" page, item "system software", status "update available"
4. Select the "system software“ item to bring up the "csdb update" page/ menu (refer to figure 4).
8. Wait for the update to be finished (total time for update approximately 5 min)
9. Wait for the status to change to "done - remove usb stick" (refer to figure 6)
Rev. Date:
Rev. Tag:
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 7
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
10. Remove the USB memory stick from the USB port
11. Wait for "csdb update" screen to vanish and the "cms equipment" page to show up
12. Follow section 4.1.1 "system software (Configuration Server Database)" and ensure that the cor-
rect config database is reported prior to proceed with section 3.3 "Preparation for the automated
system update procedure"
(verify update p/n SCDLJ75-0469-C is reported on the "system software" entry)
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 8
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
"ready" although an update is available and required.
In case the GUI does not indicate one of the above mentioned states, the system did not find
any package to be updated. In this case no update can be performed.
4. Select the item [system] to get to the "cms update" page (refer to figure 9)
5. In case an internet connection to the DRM License Server is required for the update, establish the
connection in reference to section 3.3.1 before continuing with this procedure
6. Select [update]
Rev. Date: 7. Verify that the status changes to "updating" (refer to figure 10)
Rev. Tag: (active indicates the number of LRUs currently marked for update, pending indicates the number
of LRUs scheduled to be updated)
NOTE: In case the update page reports
active: 1 or 2
pending: 9
for more than 20 min, the APA3009 may require repower.
Remove power from the APA for about 5 sec (CB 71 and CB 227 on P9)
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 9
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
The APA3009 will reboot again and the automated update procedure will proceed.
8. Once the update of the EIU is started (last LRU to be updated) the GCP will go blank
9. Wait until the main screen is shown again (refer to figure 1)
10. The system update update is completed.
Rev. Date:
Rev. Tag:
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 10
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761
Engineering Bulletin cLufthansa Technik
Component
Subject CABIN SYSTEMS - Cabin Management System, System Configuration Database Update,
niceview3D optimizations, and various improvements
4. ACCEPTANCE TEST PROCEDURE
All parts within the nice system are capable to report the current software p/n to the main control
panel (galley control panel).
4.1 Verification of the modification
If not explicitly mentioned, all tasks are to be performed at the main control panel (galley control
panel).
1. Navigate to cms equipment page (refer to section 3.1).
4.1.1 system software (Configuration Server Database)
1. Navigate to item system software
2. Verify following indications:
- p/n: SCDLJ75-0469-C
3. Return to previous page.
NOTE: If the wrong p/n is reported, repeat the update procedure (section 3.2).
4.2 Close-up
1. Turn off system.
Rev. Date:
Rev. Tag:
Rev. Date 25 April 2014 See proprietary notice first page! SCDLJ75-EB44-0271
Rev. No. 00 Page 11
LHT Form 32331 B-10 (HAM WO/E3) Printed in the Federal Republic of Germany IQM.245761