This document summarizes a framing check report in two pages. It lists various structural elements like anchor bolts, guy ropes, bracings, and connections and observes whether they are installed correctly and according to drawings. The report checks that anchor bolts have the proper projection and nuts, bracings are installed at haunches, connection joints are properly tightened, and bolts are fitted correctly. It verifies plumbness of columns and alignment of frames, and ensures secondary structures like purlins and girts are straight and uniformly sloped.
This document summarizes a framing check report in two pages. It lists various structural elements like anchor bolts, guy ropes, bracings, and connections and observes whether they are installed correctly and according to drawings. The report checks that anchor bolts have the proper projection and nuts, bracings are installed at haunches, connection joints are properly tightened, and bolts are fitted correctly. It verifies plumbness of columns and alignment of frames, and ensures secondary structures like purlins and girts are straight and uniformly sloped.
This document summarizes a framing check report in two pages. It lists various structural elements like anchor bolts, guy ropes, bracings, and connections and observes whether they are installed correctly and according to drawings. The report checks that anchor bolts have the proper projection and nuts, bracings are installed at haunches, connection joints are properly tightened, and bolts are fitted correctly. It verifies plumbness of columns and alignment of frames, and ensures secondary structures like purlins and girts are straight and uniformly sloped.
Format No: Rev. No.: R-00 Project Engineer: Erector:
Effective Date: 01-01-2022 Page No.: 1 of 2 Project Manager: Date: Project Name :- Location :- Project No. & Building Name:- Particular Observation Observation Observation Observation Date: Date: Date: Date: Grid: to Grid: Grid: to Grid: Grid: to Grid: Grid: to Grid: Yes No Remark Yes No Remark Yes No Remark Yes No Remark Anchor bolt projection is as per Drg? Nut of the anchor bolts are tightened? Anchor Bolt Pedestals
Lock nuts are provided with anchor bolts?
Plate Washers are provided with anchor bolts? Proper Packing plates in the gap between the Base plate of Column and RCC Column? Turn-buckle is used in temporary bracings? Guy Ropes
Guy ropes are provided with Columns/ Rafters?
Temporary bracings are installed at all haunches (Connection plates of Rafter)? Connection joint between rafter to rafter are tighten by turn of nut Connectio
method / torque wrench
n joints
Gap between the connections plates have been filled with Shim plates?
Roof and wall bracing are installed as per Drg?
All Bracings
Flange Angle bracing are tightened?
Diagonal Rod bracing are tightened? Diagonal Angle bracing are tightened? Hill side washer and nut is provided with the diagonal bracings? Hill side washer is fitted as per the drawing? Inspected By Verified/Approved By FRAMING CHECK REPORT (2/2)
Format No: Rev. No.: R-00 Project Engineer: Erector:
Effective Date: 01-01-2022 Page No.: 2 of 2 Project Manager: Date: Project Name :- Location :- Project No. & Building Name:- Particular Observation Date: Observation Date: Observation Date: Date: Observation
Grid: to Grid: Grid: to Grid: Grid: to Grid: Grid: to Grid:
Yes No Remark Yes No Remark Yes No Remark Yes No Remark Machine bolts are correctly fitted in secondary framing? All high strength bolts are fitted as per drawing requirements? Connection Bolts
Washer installed with high strength bolts?
Thread projection of the bolts is maintained as per requirement? High Tensile bolts are tightened by turn of the nut method? High strength bolts are correctly tightened as per required torque/Turn of Nut Method? Correct sizes of bolts are used? All bolts are fitted in all holes of connection plates? Column is in plumb? Framin
Main frame is correctly plumbed and aligned?
g
Crane beams are aligned?
Are stopper installed on crane beams? Sag angles are correctly fitted and are per Drg. Seconda ry
Purlins are straight, Aligned and in uniform slope?
Girts/Side Runners are straight and aligned? Girts/Side Runners are in plumb? Final painting/Touchup is done as per requirement? Inspected By Verified/Approved By