Professional Documents
Culture Documents
* Hydro MPC-S maintains the pressure through cutting in/out the CR pumps.
* The system performance is adapted to the demand through cutting in/out the
required number of CR pumps and through parallel control of the pumps in
operation.
* Pump changeover is automatic and depends on load, time and fault.
Dry-running protection and diaphragm tank are available according to the list of
accessories.
Pumps, piping, cabling complete as well as Control MPC are mounted on the base
frame.
The booster system has been preset and tested.
120
110
100
90
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 Q [m³/h]
P2
[kW]
110
100
90
80
70
60
50
40
30
20
10
Technical:
Min flow system: 6.4 m³/h 80
Max flow: 340 m³/h
Max flow system: 255 m³/h 60
Head max: 119 m
Impellers main: 4 40
Main pump name: CR64-4
Main pump No: 96123536 20
Number of pumps: 4
Non-ret. valve: at discharge side
0
0 50 100 150 200 250 300 Q [m³/h]
Installation: P2
Maximum operating pressure: 16 bar [kW]
Maximum inlet pressure: 4.1 bar
80
Flange standard: DIN
Manifold inlet: DN 200 60
Manifold outlet: DN 200 40
Pressure stage: PN 16 20
0
Liquid:
Pumped liquid: Water 300
1500
1570
DN 200
PN 16
Electrical data:
Power (P2) main pump: 22 kW
250
1050
415
1390
X0 PE PE
Common alarm
Config.file Control MPC: 98272009 Remote control
3011
PN 16
DN 200
415
300
1050
1390
635
1500
800
2026
250
1570