The document describes different types of hammers used for various purposes. It discusses ball-peen hammers, cross-peen hammers, French hammers, straight-peen hammers, point-peen hammers, claw hammers, framing hammers, sledgehammers, club hammers, mallets, dead blow hammers and more. Each hammer type has a specific head design and use case in fields like metalworking, carpentry, masonry and other trades.
Original Description:
Original Title
REVGO Printable Flashcards (BT2) - Alvaro Cabanting Jr 01
The document describes different types of hammers used for various purposes. It discusses ball-peen hammers, cross-peen hammers, French hammers, straight-peen hammers, point-peen hammers, claw hammers, framing hammers, sledgehammers, club hammers, mallets, dead blow hammers and more. Each hammer type has a specific head design and use case in fields like metalworking, carpentry, masonry and other trades.
The document describes different types of hammers used for various purposes. It discusses ball-peen hammers, cross-peen hammers, French hammers, straight-peen hammers, point-peen hammers, claw hammers, framing hammers, sledgehammers, club hammers, mallets, dead blow hammers and more. Each hammer type has a specific head design and use case in fields like metalworking, carpentry, masonry and other trades.
is flat and one is rounded or hemispherical. It is commonly used for rounding the edges of metal pins and fasteners, closing rivets and shaping metal. It can be called “machinist’s hammer”. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: Cross-peen hammer is a hammer with two heads – one is flat and the other is blade perpendicular to the handle. It can be used for starting panel pins or tacks without the risk of hitting your fingers and for shaping metal. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A French hammer or French locksmith has a notch behind the cross-peen designed to get into the tight areas of a box lock. It can also be called a French style cross-peen hammer. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A straight-peen hammer is a hammer with two heads – one is flat and one is a blade parallel to the handle. It functions like cross-peen hammer in shaping metal. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A point-peen hammer is a type of hammer with two heads – one is flat and the other is pointed used for picking hard objects. It is similar in function to a pick hammer which is a sturdier version of a point-peen hammer. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A claw hammer has two heads – one is flat and other is a curved forked claw that can grip nail heads, allowing the users to lever out nails. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A stubby claw hammer is a smaller version of a claw hammer used for cabinet works and other projects which require a hammer in close quarters. Stubby claw hammers are designed for confined areas. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A framing hammer has two heads – one is flat and the other is straight forked claw. The flat head is typically waffled. It is commonly used for assembling house frames. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A sledgehammer is a large steel-head hammer used for demolition and heavy-driving. The steel head is typically mounted on a long handle for maximum momentum when driving. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A club hammer has a short, double-faced head similar to that of a sledgehammer but usually has shorter handle. It is used for driving chisels and masonry heads, as well as light demolition work. It is also known as drilling hammer, lump hammer, mini-sledgehammer or thor’s hammer. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A mallet is a hammer used to strike an object without damaging it. For this use, they are typically lightweight using wooden handle. The head is not made from metal but from wood, rubber or leather to prevent damage to objects. The image shows a rubber mallet which can be used in woodworking and tile installation. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A dead blow hammer is a special type of hammer where the head is specially designed for minimal recoil or rebound. The head is usually a solid rubber or plastic or semi-hollow. It is commonly available in black or orange color. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A joiner’s mallet is a common type of woodworking mallet typically made of wood. It is characterized by a large wooden head with two slightly angled faces. It is used for delicate woodworking jointing and chisel works. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A tack hammer or upholstery hammer is a hammer with one or two small head/s designed for pounding in small nails. Tack hammers are commonly used for cabinetwork, molding, trim, and upholstery. The heads are typically magnetized. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A pick hammer is a type of hammer with two heads – one is flat and the other is either a chisel or pick. These are typically used for breaking rocks. It is also known as rock hammer or geologist’s pick. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A bushing hammer or bush hammer is a type of masonry tool used to texturize stone and concrete using its metal head that contains conical or pyramidal points or teeth. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A repousse or chasing hammer is a type of hammer used for forming and raising shapes from sheet metal or jewelry. It is characterized by bulbous-ended handle and two heads – one is rounded flat and other is a small rounded peen. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A drywall hammer is a special type of straight-peen hammer where the peen more closely resembles a hatchet with a notch in the bottom. This hammer is specially used for putting up or taking down drywalls. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A journeyman’s mallet is a small mallet with brass head which is most commonly used in fine wood joinery. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A carver’s mallet or wood carving mallet is a type of a wooden mallet which is characterized by its round head designed for driving gouges and precise chiseling. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A hatchet hammer or half-hatchet hammer is a combination of a flat headed hammer and a hatchet blade on the opposite side. It can be used for a variety of tasks involving cutting, splitting and striking. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A rip hammer or ripping claw hammer is another version of a claw hammer but with straight claw instead of curved claw. It is more preferred for ripping objects such as nailed woods. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A stonemason’s or bricklayer’s hammer is a type of masonry hammer with two heads – one is flat-faced and the other is a chisel- shaped blade. It can be used for chipping stones or masonry bricks. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A scaling hammer is a specialty hammer with a vertical chisel and pick instead of normal flat heads. These hammers are used for removing scale, rust and various hard coatings from boilers and other surfaces. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A planishing hammer has a slightly convex head and a pein tipped with a cylindrical die. It is used for fine- shaping and smoothing metal over a planishing stake, allowing the metal to take the shape of the stake’s head. Planishing is a process of flattening sheet metals with smooth-faced hammer or between rollers. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A roofing hammer is a specialty hammer used for roofing works. It is characterized by the claw end with a spike offset which is used to guide or tap the roof covering piece into place. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A tinner’s hammer or setting hammer is a type of hammer with two heads – one is a square flat and the other is a sharpened cross- peen. It is used for completing seams and setting a rolled edge in metalworks. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A toolmaker’s hammer has two heads – a rounded flat face and a ball peen. Between these two heads is a magnifying glass. It is used for doing delicate work in machines. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A welding hammer or chipping hammer has a metal head consisting of a round chisel at one end and a vertical pein on the other. The handle has a spring which helps dissipate heat while it is used to remove slag from welding points once the weld bead has cooled. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A blocking hammer is a type of hammer with two heads – one that is a flat square and the other is a cylindrical head. It is commonly used by blacksmiths for shaping metal on a block or anvil. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A blacksmith hammer or forging hammer is a form of a sledgehammer where the second head is slightly tapered and rounded. It is designed for shaping hot metal against an anvil. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A scutch hammer is a special masonry hammer used to remove old mortar from bricks and paving. It is characterized by the slots for scutch comb holder in one or two of its heads. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A lineman’s hammer has two solid conical heads. It is used by linemen working on telephone poles when driving lag screws and hammering bolts. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A brass hammer is characterized by its brass head which is typically thin and cylindrical double heads. It is used for metalworks such as pounding steel pins without damaging the surrounding surface. It is an alternative to steel- headed hammers in more sensitive works. IDENTIFY THIS TYPE OF HAMMER Hand Tools Answer: A bolster or brick bolster resembles a chisel but has wider cutting edge. It is used for cutting brick and stone. IDENTIFY THIS TOOL Hand Tools Answer: A hacksaw is a type of saw with a metal C-shaped frame holding a thin fine-toothed blade in tension. It is made for cutting metal such as pipes, but it can also cut plastic pipes. It can have different handle configurations such as straight, pistol or tubular. The image shows a hacksaw with pistol handle. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A coping saw, like a hack saw, is also a type of hand saw with a C-shaped frame holding a blade in tension. However, the blade is narrower and is ideal for doing curved cuts on wood such as coping joints. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A bow saw is a type of saw with a bow- shaped frame holding a coarse-toothed blade usually used for wood cutting. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A bucksaw is an old type of handsaw for cutting logs or firewood. It typically has an H- shaped frame holding a coarse-toothed blade in tension. It is typically used with a sawbuck which holds the logs being cut. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A fret saw looks similar to a coping saw. It also has a C-shaped frame but is deeper and has a relatively shorter blade. It is used for cutting with tighter radii and more intricate or delicate curves and cuts such as fretworks. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A keyhole saw is a long, narrow and small saw used for cutting small features in different materials. It is also called pad saw, alligator saw, jab saw, compass saw and drywall saw. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A Japanese saw or pull saw is a type of saw that works by pulling the blade instead of pushing it which provides a cleaner and narrower cut. It is used for smaller and more precise cutting works. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A backsaw is characterized by its stiffening rib on the edge opposite the cutting edge which allows for better control and more precise cutting. It can be used for precise wood cutting such as for dovetails, miter and tenons. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A veneer saw is a small handsaw with double cutting edges for cutting thin hardwood veneer. Its narrow curved blade facilitates precision work and its elevated handle makes it possible to cut flush with a surface. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A pruning saw is a handsaw used for cutting lumber specially trimming live shrubs and trees. It is typically characterized by a tapering straight or curved blade. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A rip-cut saw is a type of handsaw with a wide blade and is characterized by the orientation of the blade teeth. The teeth of a rip- cut is designed for cutting woods parallel to the direction of the wood grain. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A cross-cut saw is a type of handsaw with a wide blade and is characterized by the orientation of the blade teeth. The teeth of a cross-cut blade is designed for cutting woods perpendicular to or across the wood grain. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A two-man saw is a type of hand- powered saw which is operated by two persons. It is typically used for cutting large woods or logs. IDENTIFY THIS TYPE OF SAW Hand Tools Answer: A drawknife (drawing knife, draw shave, shaving knife) is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer (along the cutting edge) than it is deep (from cutting edge to back edge). IDENTIFY THIS TOOL Hand Tools Answer: A flush-cut saw is a double-edged tool, similar to a veneer saw, that is designed for trimming the ends of dowels, tenons, and other protrusions flush with a surface. IDENTIFY THIS TOOL Hand Tools Answer: An alignment pry bar or aligning bar is a type of a pry bar which is designed to align bolts and other mating holes in construction and engineering. It is characterized by the pointy end which is used for aligning bolt holes. It is also known as sleeve bars. IDENTIFY THIS TOOL Hand Tools Answer: A cat’s claw pry bars, claw bars or cat’s paw nail puller is a type of pry bar primarily used for removing embedded or headless nails from wood or other materials. It is characterized by claws on both ends that look like cat’s claws. IDENTIFY THIS TOOL Hand Tools Answer: A digging pry bar or digging bar is a long, straight type of metal pry bars which is used for digging and loosening hard or compacted materials such as rock, soil, tree roots, concrete or ice. The ends can either be blunted, pointed, chiseled or wedged in design. IDENTIFY THIS TOOL Hand Tools Answer: A flat pry bar has beveled edges with nail slots at both ends and a curved rocker head for maximum prying power. It is ideal for prying , scraping and pulling. IDENTIFY THIS TOOL Hand Tools Answer: A gooseneck pry bar is the most common type of pry bar. It is also called as crowbar, pinch bar or wrecking bar. It is generally used for nail pulling, prying and wrecking. IDENTIFY THIS TOOL Hand Tools Answer: A rolling head pry bar has a rolling head hook end which delivers the leverage needed to pry objects apart effectively. IDENTIFY THIS TOOL Hand Tools Answer: A molding pry bar has a prying-end that is notably thin and wide, which makes it more useful than a flat bar at getting behind a piece of trim and less likely to cause damage. IDENTIFY THIS TOOL Hand Tools Answer: A heavy-duty pry bar is characterized by its handle with a built-in strike cap which is designed to be hit with a hammer, providing extra strength and leverage support. IDENTIFY THIS TOOL Hand Tools Answer: A brick trowel or bricklaying trowel is a type of masonry trowel used for spreading mortar on bricks or concrete blocks. It is characterized by its pointed toe or nose which gives precise control of mortar placement. It can also be called a pointing trowel. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A bucket trowel is a type of masonry trowel characterized by its wide blade and used for scooping mortar from a bucket. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A concrete finishing trowel is characterized by a flat rectangular steel blade with attached handle and is used for manually finishing a concrete. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A gauging trowel is a masonry trowel with a round nose or toe which is used for mixing mortar and applying small amounts in confined areas. It can also be used for replacing crumbled mortar and to patch concrete. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A pool trowel is a masonry trowel with flat blades and rounded ends. It has an attached handle and is used to apply coatings to concrete, such as swimming pools or decks. This tool is designed for curved and smooth surfaces and usually used for finishing coats that require minimal lines and are smooth in appearance. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A corner trowel or corner tool is a type of hand tool used for shaping concrete or drywall compounds around internal and external corners. It is characterized by a 90-degree bend in the blade with handle on its center. It is also a type of angle trowel. The image shows an inside corner trowel. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A corner trowel or corner tool is a type of hand tool used for shaping concrete or drywall compounds around internal and external corners. It is characterized by a 90-degree bend in the blade with handle on its center. It is also a type of an angle trowel. The image shows an outside corner trowel. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A margin trowel is a type of masonry trowel that is characterized by its square end for finishing angles and narrow spaces. It is also used to move, apply or smooth small amounts of masonry or adhesive material. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A notched trowel is characterized by the blade edges that have notches, usually two edges. The notches can have different profiles. Notched trowels are generally used to spread adhesive and thin set. It is also called a tile trowel. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A duckbill trowel has a long , curved edge that will allow for smoothing out materials tucked in tight spaces. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A tuckpointing trowel or tuck-pointer is a narrow-bladed pointing trowel which is mostly used for filling masonry joints with mortar. It is also called as pointing iron, brick iron, joint filler, finger trowel etc. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A concrete edger is a special type of trowel for shaping edges of concrete. It is used to produce neat rounded edges along the slab perimeter. It is characterized by a rounded edge on its blade. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A fresno is a type of steel trowel that has a bull float handle. It looks similar to a bull float but the blade is thinner and made of steel. IDENTIFY THIS TYPE OF TROWEL Hand Tools Answer: A concrete float or simply hand float or darby is a handtool used to finish a concrete surface by making it smooth. Floating or darbying is commonly done after screeding the concrete slab. The purpose of floating is to level ridges and fill voids left by the screeding operation. There are different types of tools used for concrete floating. The image shows a wooden hand float. IDENTIFY THIS TOOL Hand Tools Answer: A magnesium float is a hand float with magnesium blade. It is used for concrete floating. Compared to trowels, floats have thicker blade and a closed loop handle. Aside from wood and magnesium, the blade can be made from resin and aluminum. Unlike trowels, steel is not common for concrete floats. IDENTIFY THIS TOOL Hand Tools Answer: A bull float is a type of concrete float that has a long blade with attached long handle used to push or pull across large areas of concrete. The blade is typically 8 inches in width and 3 to 10 feet in length. The blade is typically made from aluminum, magnesium or wood. IDENTIFY THIS TOOL Hand Tools Answer: A fresno trowel is basically a trowel with long handle. It is used for hand troweling large areas such as driveways. The ends of the blade can be rounded or square. IDENTIFY THIS TOOL Hand Tools Answer: A walk-behind power trowel functions the same as hand concrete trowels but is used on larger areas. This type is typically used for finishing driveways and small to mid-sized commercial or warehouse floors. The blades can also be replaced with float which makes it a power float. IDENTIFY THIS EQUIPMENT Power Tools Answer: A ride-on power trowel functions the same as hand concrete trowels but is used on larger areas. This type is typically used for finishing larger concrete areas, typically over 6,000 square feet. Some models can also be used for power floating. IDENTIFY THE EQUIPMENT Power Tools Answer: A hand screed or straightedge is a bar or board used in screeding concrete flatworks. These tools are typically long and straight and are used for smoothing and roughly leveling wet concrete shortly after it is poured. The common size of its section is 2” by 4”. IDENTIFY THE TOOL Hand Tools Answer: A bump cutter is basically a straightedge or hand screed with long handle for longer reach. It functions like other screeding tools which is used in leveling the concrete flatwork. Some bull floats can also be used as screed which can be called screed float. IDENTIFY THE TOOL Hand Tools Answer: A stand-up or walk-behind screed machine is used for screeding small concrete pours and tight areas. It is characterized by a vibrating screed bar that is operated by a single user. IDENTIFY THE EQUIPMENT Power Tools Answer: A roller screeding machine or spinning screed is a type of a screeding machine operated by two users. The leveling if concrete is done by spinning metal tube and is commonly used for small concrete flatwork. IDENTIFY THE EQUIPMENT Power Tools Answer: A truss screeding machine or truss screed is a relatively large screed machine used for larger concrete flatworks. Leveling the concrete is done using a vibrating truss or A-frame dragged by a crew or a wheeled vehicle. IDENTIFY THE EQUIPMENT Power Tools Answer: A laser-guided screeding machine or laser screed is a type of large screed machine which is used for more precise concrete leveling. The leveling bar is typically attached to a wheeled control or vehicle. IDENTIFY THE EQUIPMENT Equipment Answer: A concrete hand tamper is a tool used to consolidate a wet concrete, making the larger aggregates settle and bringing the fine materials to the surface. Take note that it is only used on low slump concrete because coarse aggregate naturally settle in high slump concrete. IDENTIFY THIS TOOL Hand Tools Answer: A roller tamper is a tool used to consolidate a wet concrete, making the larger aggregates settle and bringing the fine materials to the surface. Take note that it is only used on low slump concrete because coarse aggregate naturally settle in high slump concrete. IDENTIFY THE EQUIPMENT Hand Tools Answer: A concrete hand groover or jointer is a type of tool used to create joints and grooves in wet concrete instead of cutting them by concrete saw when it dries. The joints or grooves control the location of cracks that may form on the concrete slab. IDENTIFY THIS TOOL Hand Tools Answer: A concrete finishing broom or brush is a special broom used to create a broom-finish on concrete. Broom-finished concrete is popular for patios, driveways and more. IDENTIFY THIS TOOL Hand Tools Answer: A digging shovel is characterized by the shape of its blade. It has a sharp or pointed blade that is used to pierce tougher ground. The handle and grip can also have different shapes. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A flat shovel, flat-nose or flat-headed shovel is characterized by a slight concave but flat blade or head which is used to scoop and transfer material. Take note that a flat shovel is also called a spade. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A scoop shovel is characterized by larger blade than most shovels with a slightly shorter shaft and handle. The blade has flat tip and deeper concave shape to move larger amounts of material. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: An edging shovel is characterized by a smooth, flat blade with flat edges. It is used to provide a clean, precise cut along the borders of gardens and lawns. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: An ergonomic shovel or bent-handle shovel has a bent shaft to reduce strain on the back of the user. It is commonly seen in snow shovels. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A round digging shovel or round- pointed shovel is used for digging holes in softer soil types. It has a blade with curved edges like a pointed digger shovel, but the tip has a curved shape. It is ideal for digging holes for new plants or trees, or for transplanting bedding plants. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A folding shovel, camping shovel or portable shovel is a shovel designed to fold where the blade meets the shaft. The blade or head can have different shapes. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A post-hole digger or shovel is basically a double-shovel with blades that are rectangular with rounded corners and a semi-cylindrical design. This tool is specifically to create rounded holes in which to insert poles and posts. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A trenching shovel or clean-out shovel is designed to scoop up any loose soil in a trench after it was cut by hand or a powered trencher. It is characterized by narrow and long blade. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A powered shovel or electric shovel is typically a snow shovel. By turning a horizontal auger, it sucks up snow in its path and discharges it out of the way. IDENTIFY THE TYPE OF SHOVEL Power Tools Answer: A garden shovel, handheld shovel, hand shovel, garden trowel is a miniature shovel with pointed head and short shaft which is mostly used for gardening purposes. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A hoe is a typical digging tool with a long handle with a paddle, blade or stirrup at the end, typically at an angle to the handle. It is one of the oldest type of hand tools and is commonly used for gardening. IDENTIFY THIS TOOL Hand Tools Answer: A rake is an implement consisting of a pole with a crossbar toothed like a comb at the end, or with several tines held together by a crosspiece, used especially for drawing together cut grass or fallen leaves, or smoothing loose soil or gravel. IDENTIFY THIS TOOL Hand Tools Answer: A snow shovel or snow pusher is a special type of shovel for moving and pushing snow. It has a very wide blade. IDENTIFY THE TYPE OF SHOVEL Hand Tools Answer: A utility knife in construction industry refers to a small tool with razor blade that is retractable and replaceable. It is used for different cutting, scraping and other general uses. IDENTIFY THIS TOOL Hand Tools Answer: A brace-and-bit tool is a hand-operated tool used for boring holes on wood, consisting of a crank-shaped turning device called brace that grips and rotates the hole-cutting bit. IDENTIFY THIS TOOL Hand Tools Answer: A woodworking pencil, carpenter’s pencil or flat pencil is a type of pencil with rectangular section to prevent it from rolling away. It is typically used in woodworking. IDENTIFY THE ITEM Hand Tools Answer: A manual screwdriver is the most common type of screwdriver. It consists of a thick handle and a cylindrical steel shank. Its head or tip can have different types. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A ratcheting screwdriver is a screwdriver that saves time and reduce the need to lift and reposition the screwdriver after every turn. An internal ball-bearing mechanism allows the user to make multiple turns of the screw through an easy back-and-forth wrist action IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A powered or electric screwdriver is a handheld device used to drive screws. It can be battery-operated or corded. This tool greatly reduces the time it takes to insert or remove screws. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A yankee screwdriver is a type of ratcheting screwdriver that operates on a spring- loaded ratcheting principle. Instead of using wrist action to turn the screwdriver, the screw turns pushing the tool. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: Nail sets or nail punching tools are short, tapered steel bars that are used along with hammers. They are used for the final few blows onto the exposed heads of finish nails, sinking them beneath the surface without damaging the surrounding wood. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A chisel is a long-bladed hand tool with a beveled cutting edge and a plain handle that is struck with a hammer or mallet, used to cut or shape wood, stone, metal, or other hard materials. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A file is a tool used to shape materials, by wearing away its fine materials. Today, files are usually made of a steel bar that has a rough surface. It is also called as rasp if it has coarse teeth and is used for woods. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A plane is a tool for shaping wood. Planes are used to flatten, reduce the thickness of, and impart a smooth surface to a rough piece of lumber. As the name implies, the tool turns the worked surface into a smooth plane, a level, even surface. The image shows a hand plane or bench plane. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A block plane is a type of bench plane or hand plane where the blade is in acute angle with the surface of the workpiece. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A spokeshave is a small plane with a handle on each side of its blade, used for shaping curved surfaces (originally wheel spokes). IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A router plane is a hand plane used for smoothing out sunken panels, and more generally for all depressions below the general surface of the pattern. It planes the bottoms of recesses to a uniform depth and can work into corners that otherwise can only be reached with a chisel. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A plough plane or plow plane is a type of hand plane and is used for cutting long grooves and dadoes in boards such as those used for the fitting of drawer bottoms into drawers. To ensure the cut is parallel to the side of the board, plough planes have adjustable fences that use the edge of the board as a reference. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A powered planer or plane is a powered version of a hand planer. Power planers are timesavers that have found their niche with such varied tasks as edge-smoothing and leveling framing lumber and chamfering handrails and posts. It is also called electric planer. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: The Japanese hand plane is a simple yet extremely efficient concept of a sharp iron blade held in a wooden body. This assembly is pulled towards the user rather than pushed and because of this, the plane is more accurate and less fatiguing to use. The wooden bodies are less likely to mark or damage the surface of the work than metal bodied planes and are ideal for delicate work as well as more heavy duty planing. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A finger plane is a small plane, typically with a brass body, used by luthiers. Finger planes are used for final trimming work after glue-up, particularly around curved edges and to level inlays across curved instrument tops. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A surform plane is a special type of plane used for bullnose work, which means rounding off the edges or corners of an object. It can be used for different materials such as wood, foam, rubber, soft metals and plastic. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: Parallel clamps or parallel-jaw clamps are used to hold on to objects that are hard to grip or need extra support when working on them. The jaws are guaranteed parallel and will always be at a constant 90° angle with the bar during use to maintain the squareness of the object being clamped. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: Corner clamps are clamps designed to clamp objects in a corner at 90° or 45°. The device is used to hold two items at a 90° or 45° angle before they are attached. Corner clamps are sometimes referred to as miter clamps because they are regularly used to form miter joints. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: A C-clamp, G-clamp or carriage clamp is a device for securing workpieces to a bench or template during fitting, joining, gluing, or assembly. C-clamps have a tightening screw passing through one end of a C-shaped frame made of metal or hard wood. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: A strap clamp is a type of a band clamp that holds objects using its looped strap made of cloth or metal. In woodworking, it also functions like the corner clamp but can accommodate odd angles and frames with more than four sides. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: A spring clamp is similar to a typical clip that can be controlled by two fingers. It is used to clamp thinner objects where light pressure will suffice. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: A trigger clamp is a holding device which uses a trigger mechanism to adjust the jaws. Due to the fact that it can be operated using only one hand, a trigger clamp can also be known as a one-handed bar clamp or quick-action bar clamp. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: A pipe clamp is a two-piece kit that attaches to a length of inexpensive threaded galvanized pipe or black pipe in whatever length you want. A pipe clamp is often used in cabinet or furniture construction for edge gluing wood together. It can be made to any size by simply changing the length of pipe between the fittings. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: A wood screw clamp or hand screw clamp is a large woodworking clamp which differs from other types because it is mostly made out of wood, rather than metal. It is used where damage to workpieces should be avoided. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: Bench vises or workbench vise, in particular, is attached directly to a workbench to hold the workpiece during operations such as sawing, planing, and drilling. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: A rack clamp is specifically designed for metalworking. It is a strong and durable type of clamp, capable of withstanding the pressures of both DIY and industrial use. It can be used for all types of metalworking, including metal fabrication, welding, machining, moulding, pattern making and die holding. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: An edging clamp is a special type of woodworking clamp for applying edge banding on the side of a surface. Edging is often fixed to the side of work surfaces, such as bench tops and tables, in order to make it both more durable and attractive. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: The router is a power tool with a flat base and a rotating blade extending past the base. The spindle may be driven by an electric motor or by a pneumatic motor. It routs (hollows out) an area in hard material, such as wood or plastic. Routers are used most often in woodworking, especially cabinetry. IDENTIFY THIS EQUIPMENT Carpentry Tools and Equipment Answer: A sliding T bevel, also known as a bevel gauge or false square is an adjustable gauge for setting and transferring angles. Different from the square, which is fixed and can only set a 90° angle, the sliding T bevel can set any angle and transfer it on another piece. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A sanding block is a block used to hold sandpaper. In its simplest form, it is a block of wood or cork with one smooth flat side. The user wraps the sandpaper around the block, and holds it in place. Fancier versions use clips, teeth or clamps to hold the paper in place. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: Sash clamps are used to glue up wide panels and large assemblies, not just for doors and the like but for many more assembly tasks that the name would suggest. The clamps consist of a sturdy beam, a clamping head, and a head that can be moved along the bar and fixed solidly in place with a lever. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A hand vice is a small clamp or vise on a handle designed for holding small objects while they are being worked usually by hand. IDENTIFY THIS ITEM Carpentry Tools and Equipment Answer: An F-clamp, also known as a bar clamp or speed clamp, is a type of clamp. The name comes from its "F" shape. The F-clamp is similar to a C-clamp in use but has a wider opening capacity. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: Known to be the quick-action hold down tool, a toggle clamp is employed to keep a workpiece stationary. It may be fixed to a fixture or a bench. Or it may be handheld for holding different pieces of wood together. IDENTIFY THIS TYPE OF CLAMP Carpentry Tools and Equipment Answer: A hand drill is a manual tool that converts and amplifies circular motion of the crank into circular motion of a drill chuck. Though it has been replaced in most applications by power drills, the hand drill is used by many woodworkers. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A power drill is a handheld power tool used for drilling holes and driving screws, bolts and other fasteners using a driver bit. It can be corded or cordless. A power drill can be a drill driver or impact driver which looks similar but have different capabilities. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A hammer drill or a hammer drill driver is basically a drill driver with additional hammering action which is efficient for drilling hard materials. It can also be called as percussion drill or impact drill. IDENTIFY THIS TOOL General Tools and Equipment Answer: A rotary hammer or combination hammer is a larger version of a hammer drill. It is used for demolition because it gives a more powerful hammering or chipping action. IDENTIFY THIS TOOL General Tools and Equipment Answer: A hole saw or hole cutter is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill. IDENTIFY THIS TOOL General Tools and Equipment Answer: Moisture meters indirectly measure the moisture content in a piece of wood by measuring certain electrical properties within the wood. It can be pin-type or pinless meter. The image shows a pin-type moisture meter. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A caliper is an instrument for measuring external or internal dimensions, having two hinged legs resembling a pair of compasses and in-turned or out-turned points. Many types of calipers permit reading out a measurement on a ruled scale, a dial, or a digital display. Some calipers can be as simple as a compass with inward or outward- facing points, but no scale. IDENTIFY THIS TOOL General Tools and Equipment Answer: A featherboard or fingerboard is a simple jig that makes it much safer to cut thin stock on a table saw or router table. Primarily used on a table saw or router table, a featherboard is basically a body of wood or plastic with thin, flexible angled fingers that press against the workpiece. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A metal detector is a device in woodworking used to detect metals in wood products to prevent damage to the woodworking tools. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A saw-horse or sawhorse, saw-buck, trestle or buck is a beam with four legs used to support a board or plank for sawing. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A workbench or worktable is a special table used for woodworking. IDENTIFY THIS ITEM Carpentry Tools and Equipment Answer: A bench hook is a workbench appliance used in woodworking to hold workpieces in place while crosscutting with a hand saw. A bench hook is a simple method used to improve accuracy and safety. IDENTIFY THE ITEM Carpentry Tools and Equipment Answer: A miter gauge is a device used for holding workpieces at a set angle while being cut on table saws, band saws or sanded on stationary disk sanders. The miter gauge slides in a slot on the worktable (known as a miter slot) on the machine being used. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: An awl or scratch awl is a small pointed tool used for piercing holes, especially in leather. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A gimlet is a hand tool for drilling small holes, mainly in wood, without splitting. It is a piece of steel of semi-cylindrical form with a cross handle and a worm screw at the other end. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A wood scribe or marking gauge is a tool used in woodworking to mark out lines for cutting or other purposes. The main purpose is to scribe a line parallel to a reference edge. IDENTIFY THE TOOL Carpentry Tools and Equipment Answer: A protactor-type angle locator or angle finder is commonly used in carpentry works for setting machine angles or for obtaining any angles. IDENTIFY THE TOOL Carpentry Tools and Equipment Answer: Drilling machines, pillar drill or drill presses , are primarily used to drill or enlarge a cylindrical hole in a workpiece or part. The chief operation performed on the drill press is drilling, but other possible operations include: reaming, countersinking, counterboring, and tapping. The image shows a benchtop pillar drill that is mounted on a workbench. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A floor-standing pillar drill or floor drill press is similar to a benchtop pillar drill but is mounted on the floor and has a longer stand or body. It functions like the other drilling machines. IDENTIFY THIS EQUIPMENT Carpentry Tools and Equipment Answer: A radial drill press or radial pillar drill is a drilling press similar to a floor-standing or benchtop drill press that has an adjustable arm and allows the user to adjust the distance between the chuck and the column. Radial drills are also suitable for drilling far from the edge of a workpiece. IDENTIFY THIS EQUIPMENT Carpentry Tools and Equipment Answer: A magnetic drill press or portable drill press is a machine tool fitted with a cutting tool attachment and an electromagnet, is used for drilling holes in metals. It can also be used for core drilling. A magnetic drill press is also called a magnetic core drilling machine, magnetic drilling machine, mag base drill, magnetic drill machine, mag base drill or mag drill. IDENTIFY THIS EQUIPMENT Carpentry Tools and Equipment Answer: An oscillating spindle sander is a sander mounted on a spindle that both rotates and oscillates in and out or up and down along the axis of the spindle. This equipment is good for sanding curves and contours that would be difficult with hand or orbital sander. IDENTIFY THIS EQUIPMENT Carpentry Tools and Equipment Answer: A drum sander is a sanding machine that uses a rotating sanding drum. A stationary drum sander is a great tool for a smoothing everything from narrow strips to wide panels, while producing parts of consistent thickness. Drum-sanding is also an efficient way to smooth and level assembled frame-and-panel cabinet doors. IDENTIFY THIS EQUIPMENT Carpentry Tools and Equipment Answer: A bench-type belt sander or bench sander is a sanding or grinding machine using a rotating belt sandpaper. Most models today are combination of belt sander and disc sander. IDENTIFY THIS EQUIPMENT Carpentry Tools and Equipment Answer: A miter box is a guide to enable a saw to cut miter joints at the desired angle. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: An adz or adze is a tool similar to an axe, with an arched blade at right angles to the handle, used for cutting or shaping large pieces of wood. IDENTIFY THIS TOOL General Tools and Equipment Answer: An axe is a tool typically used for chopping wood, usually a steel blade attached parallel to a wooden handle. IDENTIFY THIS TOOL General Tools and Equipment Answer: A sandpaper is a paper covered on one side with abrasive material (such as sand) glued fast and used for smoothing and polishing. IDENTIFY THIS ITEM General Tools and Equipment Answer: A caulking gun or skeleton gun is a tool that holds a tube or cartridge that's filled with material used for sealing up gaps and cracks in the home. Caulk can be made of silicone or latex, and is used to bond a wide range of materials like metal, glass, wood and ceramic. IDENTIFY THIS TOOL General Tools and Equipment Answer: An electric adhesive dispenser or electric caulking gun is a powered version of a caulking gun. It can be corded or cordless. IDENTIFY THIS TOOL General Tools and Equipment Answer: A pocket knife or portable multitool is small tool with foldable blades and tools for different purposes. IDENTIFY THIS TOOL General Tools and Equipment Answer: A water level is the ideal tool for accurate unsighted room to room measurement or distant levelling, when using a spirit level would be ineffective. The water level is often used to determine the level spot on 2 items that are at a distance from each other, such as posts or stakes in the ground. It works because water can easily establish its level on its own. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A spirit level or bubble level is a broad category of levelling tools that rely on bubbles on a mineral spirit inside a transparent vial embedded in the tool. It is used to indicate how parallel (level) or perpendicular (plumb) a surface is relative to the earth. The image shows a spirit level bar, mason’s level or carpenter’s level which is a lightweight bar with one or more levelling vials embedded on its body. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A bull’s eye spirit level or circular spirit level is basically a circular transparent container with a bubble and mineral spirit or alcohol inside. It is used for levelling planes in two dimensions. These are typically embedded on jigs, machines, devices, appliances and instruments. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A torpedo level or canoe level is a shorter version of the typical spirit level bar. It is called torpedo because of its tapered shape. It is best used levelling in tight spaces. A torpedo level is relatively shorter and rarely exceeds 1 foot in length. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A post level is a type of spirit level that is wrapped on one of the edges of a square or rectangular post, pole or beam to ensure its plumb and level when installing or erecting. It typically has a rubber strap wrapped around the post or beam to hold it in place. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: Line levels or string levels are a special spirit level used for leveling across longer distances. They can be attached to a tightly pulled string to find level between two stakes in the ground to find level ground. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: An engineer’s level or machinist level is a high-precision spirit level used to level machines and other works required high accuracy levelling. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A pocket level is a small spirit level device that are designed to be fitted easily inside pockets. They can be mounted on a belt via clips and have magnets and v-groove that help them stick to metallic surfaces. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: An angle level is a spirit or digital level that is used for creating slopes and angles between 0 and 90 degrees. They come with an adjustable bubble vial that can help you set the angle you wish. These are used by plumbers to make sure drainage pipes are slanted correctly. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A cross-check level or right-angle levels are small pocket levels with two spirit vials for small levelling works. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: An electronic or digital level is an advanced and more accurate type of levelling tool that features a simulated bubble display or a digital readout of degrees of slope. Electronic level comes in different forms such as level bars, tripods and small levelling devices. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A plumb bob, or plummet, is a weight, usually with a pointed tip on the bottom, suspended from a string and used as a vertical reference line, or plumb-line. It is a precursor to the spirit level and used to establish a vertical datum. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A laser level or spot laser level is a type of electronic laser that projects lasers to surfaces as a levelling guide. The projected laser lines or dots can vertical, vertical and rotating. These devices can be mounted on a tripod, on a wall or any surfaces. Some models are also auto-levelling. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A pipe laser level or pipe laser is a type of construction laser that is used to measure and determine the correct grade for pipes. Pipe lasers are the most accurate way to install long runs of piping. Use them to align manholes, set slope between manholes, and to ensure each piece of pipe in the system is properly sloped and aligned. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: An optical level is basically a telescope with attached spirit level that can be adjusted so the line of sight through the device is level. It can be manually or automatically adjusted using knobs and spirit or bubble levels embedded on it. These devices are commonly used establishing elevations in large lands by surveyors. The image shows a builder’s level that can only be used for horizontal levelling, not vertical angles. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A transit level and theodolite level are two similar types of optical or electronic levels used for establishing elevations in surveying and meteorology. There is no clear distinction between transit and theodolite but unlike a builder’s level, they both can rotate on vertical axis and determine vertical angles. They are also mounted on a tripod. IDENTIFY THIS LEVELLING TOOL General Tools and Equipment Answer: A measuring tape or tape measure is a broad category of measuring tool or ruler that uses a flexible ribbon with linear-measurement markings. The image shows a retractable metal tape measure although in construction it is simply called a tape measure or pocket tape measure. IDENTIFY THIS TOOL General Tools and Equipment Answer: A surveyor’s tape measure, long tape or roll-up tape measure is a flexible tape measure that are incredibly long and ideal for creating land maps, boundaries and determining distances. Instead of a spring, this tape measure has a hand crank to wind up the tape which is commonly made of fiberglass. IDENTIFY THIS TOOL General Tools and Equipment Answer: A surveyor's wheel, also called a clickwheel, hodometer, waywiser, trundle wheel, measuring wheel or perambulator is a device for measuring long distances such as roads and properties. IDENTIFY THE EQUIPMENT General Tools and Equipment Answer: A surveyor’s rope is a measuring tool by surveyors for rough surveying measurements such as in a rough terrain or for measuring water depths. IDENTIFY THE ITEM General Tools and Equipment Answer: A drywall square or drywall T-square has two blades that can be fixed or adjustable. One blade is long which can reach 4 feet. This square is used for laying out cut lines on standard- size sheets of plywood, drywall and other board materials. IDENTIFY THE TOOL Carpentry Tools and Equipment Answer: A try square or try-square is a woodworking tool used for marking and checking 90° angles on pieces of wood. The square in the name refers to the 90° angle. The handle is thicker than the blade, so it's easy to push the inside of the handle up against the edge of a board and mark (or verify) a line perpendicular (square) to the edge. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A combination square is a multi- purpose measuring and marking tool used in metalworking, woodworking, and stonemasonry. It is composed of a rule and one or more interchangeable heads that can be attached to the rule. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A speed square is a right-angled triangular structure with different graduated scales on each of its edges. The different scale markings are: common, degrees, hip/val, and inches. The point where the edges make a right angle is called the pivot. The extruded edge called the lip. It is used for marking, checking perpendicularity and as guide for sawing. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A framing square or steel scale is a right-angle tool, generally made of steel. The wider of the two arms is called the blade, whereas, the other narrower arm is called the tongue. The blade is two inches wide, and the width of the tongue is one and a half inches. Its general use lies in laying out stairs and in roof framing. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: Folding rules, sometimes called zig-zag rules or jointed rules, are a series of two or more smaller rule strips joined with hinges. These rules can be folded together to be carried easily, or used in confined spaces. They can also be folded out and used to measure longer distances or take measurements that are further away and difficult to reach. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A miter square or mitre square is a hand tool used in woodworking and metalworking for marking and checking angles other than 90°. Most miter squares are for marking and checking 45° angles and its supplementary angle, 135°. IDENTIFY THE TOOL Carpentry Tools and Equipment Answer: A marking knife or striking knife is a woodworking layout tool used for accurately marking workpieces. It is used to cut a visible line, which can then be used to guide a hand saw, chisel or plane when making woodworking joints and other operations. IDENTIFY THIS TOOL Carpentry Tools and Equipment Answer: A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for accurate measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers. IDENTIFY THE TOOL General Tools and Equipment Answer: An angle gauge measures the angle of a fixed or worked object relative to a larger object. The three most common types of angle gauges are used in forestry, woodworking and engineering. IDENTIFY THE TOOL General Tools and Equipment Answer: Digital angle gauges use an electronic sensor to measure the distance between two measurement points. It is commonly used in woodworking. IDENTIFY THE DEVICE General Tools and Equipment Answer: A soil probe or soil sampler probe is a tubular tool that is pushed into the soil to take a soil sample at several layers. This is a quick alternative to get a quick soil profile, description and moisture content. IDENTIFY THE TOOL General Tools and Equipment Answer: A 3-pin/1-pin rebar bender is a type of tubular manual rebar bender that provides an easy way to bend rebars. It has 3 pins on one side of its head and 1 pin on the other side. IDENTIFY THE TOOL General Tools and Equipment Answer: A portable rebar bender machine is a small powered rebar bender used for small size steel bars. It can bend round steel bars, deformed steel bars. Some models can also cut rebars. IDENTIFY THIS TOOL General Tools and Equipment Answer: A tally counter or tally meter is a mechanical or electronic device used to incrementally count something, typically fleeting. It is used in multiple purposes but in construction, it is typically used in counting people and materials. IDENTIFY THE ITEM General Tools and Equipment Answer: A manual tile cuter is a simple scoring tool used to cut straight lines in ceramic and porcelain tile. They are used by tile installers. IDENTIFY THIS TOOL General Tools and Equipment Answer: A putty knife or putty plate is an implement with a broad flat metal blade used especially for applying putty and for scraping. It can be used for applying filler materials like wood filler, drywall taping compound, scraping residue and any number of other applications. Wider putty knives are also referred to as scraper putty knives. IDENTIFY THIS TOOL General Tools and Equipment Answer: A hawk or hand board is a tool used to hold a plaster, mortar, or a similar material, so that the user can repeatedly, quickly and easily get some of that material on the tool which then applies it to a surface. A hawk consists of a board with a perpendicular handle fixed centrally on the reverse. The user holds the hawk horizontally with the non-dominant hand and applies the material on the hawk with a tool held in the dominant hand. IDENTIFY THIS TOOL General Tools and Equipment Answer: A crimping tool or crimping pliers is a device used to conjoin two pieces of metal by deforming one or both of them to hold each other. The result of the tool's work is called a crimp. An example of crimping is affixing a connector to the end of a cable. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: Diagonal pliers are pliers intended for the cutting of wire. The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or "on a diagonal", hence the name. They are quite strong and can also be used to cut nails. Thus they are useful in carpentry as well as electrical work. It also known as flush cut pliers, side cutting pliers or wire cutters. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: A needle nose pliers or long-nosed pliers is characterized by its long nose. The nose of this tool is elongated for more precision and contains a cutting edge near the base. A highly versatile tool, it can be used for bending, shaping, and cutting wire. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: Slip joint pliers or water pump pliers are pliers whose pivot point or fulcrum can be moved to increase the size range of their jaws. Most slip joint pliers use a mechanism that allows sliding the pivot point into one of several positions when the pliers are fully opened. They are often used for plumbing applications and can perform many of the same duties as wrenches. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: A tongue-and-groove pliers or “channel locks” is a type of adjustable pliers with a toothed groove along the upper handle, allowing the lower jaw to be locked into a number of positions. The angled jaws make this tool useful for turning nuts and bolts. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: Locking pliers are pliers that can be locked into position, using an over-center toggle action. Locking pliers can be used to handle materials whenever it would be awkward or uncomfortable to grip them directly, for instance when working with heat or maneuvering small components into position for gluing or soldering. It is also known as vise-grip or mole wrench. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: A lineman’s pliers a type of pliers used by linemen, electricians, and other tradesmen primarily for gripping, twisting, bending and cutting wire, cable and small metalwork components. It is characterized by a 3- section jaw – serrated flat, serrated round and side-cutting section for wires. The handles are typically insulated. It is also known as side-cutting pliers or combination pliers. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: A wire stripper is a small, hand-held device used to strip the electrical insulation or outer sheath from electric wires. It is also known as cable stripper. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: Fencing pliers have more capability than the typical set of pliers. They can be used as a medium sized hammer, they have a robust claw on the back end for pulling fence staples or whatever else might need pried upon, and they can cut through whatever can fit between their cutting jaws IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: A flat nose pliers has flat, tapered jaws of these pliers that are used for gripping and twisting metal, as well as twisting leads and wires. It’s a common tool in both electrical and mechanical work. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: A sheet metal pliers has wide, rectangular jaws of these pliers are used for bending sheet metal and forming seams. They are commonly found in metal shops and other industries where sheet metal is used. Some models combine sheet metal pliers with locking pliers. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: A nail puller pliers has tips of its caws that are tapered to allow it to dig under the head of nails and pull them out. Some variations also have a claw on the back of the right jaw to provide additional leverage. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: Circlip pliers (also known as snap ring pliers) are used to remove and insert internal or external circlips. Circlips (aka retaining rings and snap rings) are fasteners that grasp elements or installations onto a shaft or in a dwelling/bore when assembled in a groove. Once it's fixed, the exposed piece functions as a shoulder which holds the particular element or installation. IDENTIFY THE TYPE OF PLIERS General Tools and Equipment Answer: A sharpener stone, grind stone or whetstone is a block of abrasive material or stone used for manually grinding or sharpening materials and tools such as knives. IDENTIFY THIS ITEM General Tools and Equipment Answer: An adjustable wrench, also called an adjustable spanner or an adjustable crescent is a tool, which can be used to loosen or tighten a nut or bolt. It has a "jaw" (the part where the nut or bolt fits), which is of adjustable size. For this reason, it can perform the same basic function as an entire set of combination or open-ended wrenches, although it requires more space due to its thicker size. It can also be called crescent wrench. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: Also referred to as a hex key, an allen wrench is hexagonal piece of metal may be either L-shaped or T-shaped with the extra limb functioning as a handle. As a male-style wrench, this fits into the heads of screws and bolts that have a hexagonal recess. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: Box-ended or box end wrenches have a closed loop at both ends, sometimes slightly higher or lower than the handle to let it grip recessed nuts without rounding the edges. The closed ends are designed to fit either hexagonal or square bolts, and are different in size. Box-ended wrenches are frequently sold in sets. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A combination wrench is a combination of box- end and open-end wrenches. One side is a closed loop for hexagonal or square nuts, while the other end is an open U-shape. Used most often for difficult nuts, the closed end loosens the nut so that the open end can be used to quickly unscrew it. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A crowfoot wrench is an open-ended wrench without a handle and is designed to be attached to a ratchet handle and socket extension. It is used for very tight spaces. It is typically sold in sets in different sizes. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: An impact wrench or air impact wrench is a power tool used for tightening or loosening nuts and bolts like a regular wrench. It closely resembles a power drill but it uses impact sockets to operate on nuts and bolts. It can be corded or cordless. This power tool can apply high torque to remove stubborn nuts or bolts. IDENTIFY THE TYPE OF WRENCH Power Tools Answer: A lug wrench is the name for a type of socket wrench used to loosen and tighten lug nuts on automobile wheels. In the United Kingdom and Australia it is commonly known as a wheel brace. Lug wrenches may be L-shaped, or X-shaped. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: An oil filter wrench is commonly used in automotive industry. It typically has a loop of chain or metal strap to wrap around the filter casing. There are also other various forms of this type of wrench. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: An open-ended wrench is characterized by two U-shaped ends, with one being slighting bigger than the other. They are used for hard-to- reach nuts and bolts, and the open design makes it possible to attach them either vertically or horizontally onto the target fitting. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A pipe wrench is an adjustable wrench that is used, as the name implies, on pipes. Most often, pipe wrenches are used on threaded pipe, usually galvanized steel, black iron or similar metal pipes. A pipe wrench has two serrated jaws that are tightened and dig into the pipe for grip. The top serrated jaw adjusts up and down to fit different size pipes. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A ratcheting wrench is any type of wrench with a ratcheting device on one or two ends. It can be combined with open-ended, box- ended or combination wrenches. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A socket wrench is a ratchet tool with a series of detachable sockets for tightening and loosening nuts of different sizes. A socket wrench or ratchet allows you to turn nuts and bolts with more ease than using a regular wrench. The ratcheting feature allows you to keep the wrench on the bolt eliminating the need to refit the wrench every time you need to make a turn. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A torque wrench is a type of a socket wrench designed to deliver a specific amount of torque without overtightening. This amount can be calibrated, and different types are available (including manual, digital, and other variations). It’s most commonly used for automotive work such as tightening wheel lug nuts. Torque sticks may be quicker but not as accurate. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: An alligator wrench is one of the earliest type of wrenches. It is called an alligator wrench due to its way of gripping nuts using its fixed jaw, with a serrated top jaw and a smooth bottom jaw. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: An armorer’s wrench as a C-shaped, serrated head and may include square slots and/or a hole to attach a ratchet handle. It is used for gun repair and maintenance. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A basin wrench has a long, T-shaped handle ending in a curved, serrated jaw. Its primary function is to loosen or tighten the fixtures under sinks and toilets, resulting in it also being known as a faucet wrench. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A bionic wrench has a round opening and two handles similar to those of pliers. When placed around the target head, the two handles can be squeezed, causing the hole to tighten and grip the head firmly, making this an adjustable box-ended wrench. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: Drum bung and plug wrenches (also known as drum bung wrenches or drum plug wrenches) are used to install and remove drum plugs (bungs). The drum plugs are screwed into a flange on the drum and the wrench is used to tighten the plug to prevent leakage. The wrench can be used to slowly loosen plugs to safely release any pressure inside the drum before the plug is removed. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: Available for both male and female-style dies, a die stock holder wrench is a two-handed wrench that grips the die in the middle using a screws to secure it. These dies are used in creating the threads on nuts and bolts. They are the basis of any tap and die set. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A dog bone wrench or dumbbell wrench is characterized by two box-shaped ends with different socket size in one tool. These are used almost exclusively for bike maintenance, although their ability to fit into small spaces has occasionally made them useful elsewhere. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A drum key is a square-holed socket wrench that has a T-shape with flattened handles. As the name implies, it is used to tune various percussion instruments, such as drums. Drum keys with longer handles allow you to apply more torque than the shorter handles. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A fire hydrant wrench is a large box- ended wrench that has a pentagon shape that was designed solely for use on fire hydrants. As a result, a hydrant can only be opened using one of these tools. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A flare nut wrench or line wrench is a hybrid of box-ended and open-ended wrenches. The opening is just wide enough to fit around a tube, but it still grips nuts like a box end. These wrenches are especially useful on softer metals prone to damage from open-ended wrenches, such as those used in plumbing. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A hammer wrench or striking wrench is a short, thick wrench (box end or open end) that has a block end that is used for hitting with a hammer or sledgehammer to transmit a high amount of force. It’s commonly used to help tighten large flange fittings and fasteners. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: The monkey wrench is a type of adjustable wrench, a 19th century American refinement of 18th-century English coach wrenches. It’s an older form of adjustable wrench similar to an alligator wrench, but with smooth jaws and rounded handle. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A pliers wrench has flat-edged jaws are at an angle and each is attached to a handle, which are connected by a bolt. The bolt can slide between two or more positions of an opening on the upper jaw, allowing the wrench to be adjusted to fit different sizes of head. The name comes from the way this tool is gripped, which is the same as a pair of pliers. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: Spanner wrenches are a highly specialized class of tools that have a curved end which may resemble either a hook or a C-shape. These have pins which allow them to be used on a variety of items, from spanner head screws to retainer rings. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A spud wrench is an old type of wrench that has a spike on the opposing end which was used to line up the holes on pipes. It has since been made obsolete by the plumber’s wrench, although it can still be found in the occasional toolbox. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A strap wrench has a rubber, fabric, or metal band or chain that loops through a handle. This self-tightening tool works best on round objects that are too greasy or oily for a normal wrench to grip. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A stubby wrench is basically any wrench with short body, typically a shorter combination wrench. It is used to fit into more confined spaces. Some newer versions also have a hinge along the handle to allow either end to be angled for even more precise use. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A tap wrench is a hand tool used to make screw threads. These tools typically have a removable bit called a tap, although some heavy-duty models have a fixed end. These taps have threads that make them look much like a bolt. The user uses a tap wrench by drilling a hole into a surface with a secondary tool, then screwing the tap into the hole. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A torx key is similar to an allen wrench or hex key but is used to fit into star-shaped heads (torx) of bolts and screws. It has an L-shaped body and can have a hex and allen keys on both ends. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: An S-wrench refers to any wrench with S-shaped body or handle. The ends can be box- ended, open-ended, ratcheting or combination. It is used in very tight spaces such as in locomotive works. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A chain pipe wrench is a type of adjustable pipe wrench that consists of a forged steel handle to which is attached a length of heavy sprocket chain. It is used by wrapping the chain around a length of pipe and engaging the sprockets in notches on the back of the handle. IDENTIFY THE TYPE OF WRENCH Hand Tools Answer: A roofing knife is a special type of utility knife that is used for roofing installation or roofing works. It has a bow-tie blade for better functionality on roofing materials. IDENTIFY THIS TOOL Hand Tools Answer: Boning rods are used to set out horizontal lines or lines with a constant slope. In particular they are used for setting out canal excavation works, but also for roads and dyke construction. IDENTIFY THIS TOOL General Tools and Equipment Answer: A manual sand sieve or sand sifter is a cheap hand-made tool for screening or sieving sand in construction. It can be operated by one person or two persons. The most important component is the sieving mesh. This is the cheapest alternative for sieving sand or soil in small construction works. IDENTIFY THIS TOOL General Tools and Equipment Answer: A surface vibrator can be in the form of a vibrating screed or plate vibrator. They are used for long horizontal surfaces such as pavements and slabs. The image shows a plate surface vibrator. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: A concrete vibrating table is made of metallic platforms mounted on springs and vibrated by electric motors. The concrete is placed in molds mounted on the platforms and securely clamped to the vibrating table. This equipment is used for precast products. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: An external vibrator or formworks vibrator is a vibrating device generally attached in formworks and is used in concrete columns, thin walls or in casting of precast units. It is also called shutter form vibrator. IDENTIFY THE EQUIPMENT General Tools and Equipment Answer: A needle vibrator, poker vibrator or immersion vibrator is a type of concrete vibrator used to vibrate wet concrete from within. Power is provided by electric motor, compressed air or petrol engine. The long tube houses a flexible shaft which rotates an eccentric weight inside the vibrating head. The frequency of the vibrator is about 700 cycles per minute. IDENTIFY THE EQUIPMENT General Tools and Equipment Answer: A rebar vibrator or rebar shaker is a device attached at the top of rebar. The shaking of the rebar is transmitted to the concrete. It is used to vibrate concrete in a cell or in a very tight space. IDENTIFY THE EQUIPMENT General Tools and Equipment Answer: A measuring box is a measuring tool in construction. It is typically used to manually determine the proportion of raw materials especially of concrete. The standard volume of a measuring box is 1 cu.ft. or 1.25 cu.ft. IDENTIFY THE EQUIPMENT General Tools and Equipment Answer: A manual hollow block mold is used to manually mold concrete hollow blocks piece by piece. IDENTIFY THIS TOOL General Tools and Equipment Answer: Made of hardened steel, cold chisels have a beveled cutting edge and an octagon-shaped handle. The cold chisel has a flat cutting edge, but related chisels are wedge-shaped (cape chisel), half-round, diamond-shaped, or round. Because cold chisels are used to form metal, they have a less-acute angle to the sharp portion of the blade than a woodworking chisel. IDENTIFY THIS TOOL General Tools and Equipment Answer: A straightedge is a steel rule used to test the flatness of a workpiece. The edge of the steel rule is placed on the surface of a material and then held up against the light. IDENTIFY THIS TOOL General Tools and Equipment Answer: A hermaphrodite caliper consists of two legs, one is like that of a divider and the other one is like the leg of an inside caliper. Hermaphrodite calipers may be used to scribe arcs or in marking layout work. IDENTIFY THIS TOOL General Tools and Equipment Answer: Snips, also known as shears, are hand tools used to cut sheet metal and other tough webs. The image shows a tinner’s snip or tin snip that is defined by its long handles and short blades. They usually have extra wide jaws and are made of drop forged carbon steel. IDENTIFY THIS TOOL General Tools and Equipment Answer: Compound-action snips, also known as aviation snips, maille snips or sheet snips are special type of snips or shear tool with a special linkage design. Compound-action snips, also known as aviation snips, maille snips or sheet snips. There are three cutting styles for compound-action snips: straight cutting, left cutting, and right cutting. IDENTIFY THIS TOOL General Tools and Equipment Answer: A scriber is a pointed tool used for marking lines on metals. The process of using a scriber is called scribing and is just part of the process of marking out. IDENTIFY THIS TOOL General Tools and Equipment Answer: A strip heater or acrylic line bender is a machine with a strip of wire that heats the acrylic to such a heat that it becomes malleable without warping or bubbling the acrylic as that can happen with other more rapid means of heating the acrylic. It heats the acrylic up so that it is easy to bend and shape how ever you like. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: A mill drill or milling machine is a drilling machine similar to a drill press or pillar drill. Mill drills have a table that can move on two axes. They combine the design of a drill press with the functionality of a milling machine and can both drill holes and remove material from the surface of a workpiece in light milling tasks. Drill presses and mill drills are often used in small fabrication shops or maintenance departments. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: Compressed air sprayers or pressure sprayers disperse fertilizers, pesticides, soaps, cleaning solutions, stains, and sealants. They use compressed air to pump solution through a spray nozzle for application. The image shows a handheld pressure sprayer. IDENTIFY THIS ITEM General Tools and Equipment Answer: Compressed air sprayers or pressure sprayers disperse fertilizers, pesticides, soaps, cleaning solutions, stains, and sealants. They use compressed air to pump solution through a spray nozzle for application. The image shows a backpack pressure sprayer. IDENTIFY THIS ITEM General Tools and Equipment Answer: Compressed air sprayers or pressure sprayers disperse fertilizers, pesticides, soaps, cleaning solutions, stains, and sealants. They use compressed air to pump solution through a spray nozzle for application. The image shows a cart- type pressure sprayer. IDENTIFY THIS ITEM General Tools and Equipment Answer: A manual ground tamper or soil tamper consists of a heavy metal head with a long shaft or handle used for levelling soil, asphalt, gravel, stone and dirt. IDENTIFY THIS TOOL General Tools and Equipment Answer: A door lifter or board lifter is a tool was designed to slide under your door to help support and elevate the during installation. The tapered front end of the door lift slips neatly under boards and doors and holds them securely in place. IDENTIFY TOOL General Tools and Equipment Answer: A hammer tacker is a type of staple gun that inserts a staple whenever the head of the tool quickly strikes a hard object. A hammer tacker can be used for many purposes, such as: installing roofing paper, carpet backing or even installing insulation. IDENTIFY THIS TOOL General Tools and Equipment Answer: A staple gun or staple gun tacker is used to fasten metal staples as used in upholstery, carpeting, home repair and light construction. IDENTIFY THIS TOOL General Tools and Equipment Answer: Hot glue guns are portable devices that utilize and dispense hot melt adhesives or “hot glue”. Hot glue guns use continuous heating elements to melt the adhesive or locally known as “glue sticks”. IDENTIFY THIS TOOL General Tools and Equipment Answer: Hot melt adhesive (HMA), also known as hot glue or glue sticks, is a form of thermoplastic adhesive that is commonly sold as solid cylindrical sticks of various diameters designed to be applied using a hot glue gun. IDENTIFY THIS ITEM General Tools and Equipment Answer: A mixing paddle is a long tool typically attached to a drill or mixer for mixing up plaster, paint or other liquid to a desired consistency. IDENTIFY THIS ITEM General Tools and Equipment Answer: A mixer drill is a powered drill designed for mixing. It is characterized by a double handle on the sides. The mixing paddle is attached on its nozzle. IDENTIFY THIS TOOL General Tools and Equipment Answer: A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering to measure the clearance between two parts. It is a precision measuring tool made from tight tolerance high carbon steel material used to check spacing and gaps of dies or any machinery during set-up or repair. IDENTIFY THIS TOOL General Tools and Equipment Answer: A radius gauge, also known as a fillet gauge, is a tool used to measure the radius of an object. Radius gauges require a bright light behind the object to be measured. The gauge is placed against the edge to be checked and any light leakage between the blade and edge indicates a mismatch that requires correction. IDENTIFY THIS TOOL General Tools and Equipment Answer: A beam compass is a compass with a beam and sliding sockets or cursors for drawing and dividing circles larger than those made by a regular pair of compasses. It is used for drawing larger circles or curvatures larger than those possible with the small compass sets. It is used on materials or workpieces such as drywalls and boards. IDENTIFY THIS TOOL General Tools and Equipment Answer: A chalk line or chalk box is a tool for marking long, straight lines on relatively flat surfaces, much farther than is practical by hand or with a straightedge. They may be used to lay out straight lines between two points, or vertical lines by using the weight of the line reel as a plumb line. It also known as chalk reel. IDENTIFY THIS ITEM General Tools and Equipment Answer: An air hammer, also known as an air chisel, is a pneumatic hand tool used to carve in stone, and to break or cut metal objects apart. It is designed to accept different tools depending on the required function. IDENTIFY THIS TOOL General Tools and Equipment Answer: Heat guns are electric hand tools which look and work in a similar way to hair dryers – operating a fan that pulls air into the body of the tool and drives it across an electric heating element and out through a nozzle. Heat guns are sometimes referred to as hot air guns. IDENTIFY THIS TOOL General Tools and Equipment Answer: A hand riveter or rivet gun is a manual tool used to install blind rivets; usually to fasten two or more pieces of material together. Take note that there are other types of rivet gun used to install other types of rivet fastener. The image shows a standard or one-hand hand riveter commonly used for light construction. IDENTIFY THIS TOOL General Tools and Equipment Answer: A lazy tong hand riveter or folding hand riveter is another version of manual rivet gun with an accordion mechanism to install blind rivets. It is used for larger sizes of blind rivets and for heavy-duty fastening. IDENTIFY THIS TOOL General Tools and Equipment Answer: A lever-type hand riveter, long arm hand riveter or two-handed riveter is another version of manual rivet gun used for larger sizes of blind rivets. The long arms provide extra reach for tight areas and for extra leverage. IDENTIFY THIS TOOL General Tools and Equipment Answer: A bolt extractor is used to extract stuck or rusted bolts and screws. This tool is basically a drill bit that drills into the stuck screw then the other head is used to unscrew to remove the bolt or screw. IDENTIFY THIS TOOL General Tools and Equipment Answer: A power rivet gun or power riveter is a powered tool for installing blind rivets. It can be electric-powered or pneumatically-powered. It is ideal where installing rivets is repetitive. IDENTIFY THIS TOOL General Tools and Equipment Answer: Scratchers or scarifiers are used in the under layers of plaster and rendering, primarily the first or scratch coat. This tool is used to easily scratch undercoats so finish coat will bond and not separate. IDENTIFY THIS TOOL General Tools and Equipment Answer: A profile gauge or contour gauge is a tool for recording the cross-sectional shape of a surface. It consists of a set of steel or plastic pins that are set tightly against one another in a frame which keeps them in the same plane and parallel while allowing them to move independently, perpendicularly to the frame. The gauge can then be used to draw the profile or to copy it on to another surface. IDENTIFY THIS TOOL General Tools and Equipment Answer: A step ladder or A-frame ladder is the most common type of ladder for domestic use. It is self- supporting and foldable. It consists of two sets of rungs or steps that are evenly spaced with a top cap that connects the two together. The image shows a twin-type or double- front step ladder because both sides can be used for climbing. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A step ladder or A-frame ladder is the most common type of ladder for domestic use. It is self- supporting and foldable. It consists of two sets of rungs or steps that are evenly spaced with a top cap that connects the two together. The image shows a front-type step ladder because only one side can be used for climbing. The other side is used for support only. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A platform ladder is a form of a front- type step ladder with a platform provided at the highest intended landing level that is usually surrounded by rails for safety. A platform ladder is used when the user will be standing in the ladder for a long time. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A step stool is a smaller and portable type of step ladder but with flat and wide steps, instead of the thin rungs in a typical step ladder. It is usually for light load only and shorter. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A single ladder is a broad category of a ladder types indicating a non-self-supporting ladder with fixed length. Take note of its difference to a sectional ladder. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A combination ladder is a combination of a step ladder and an extension ladder. Some models can also be used as a non-self-supporting single ladder. This type of ladder can be designed with either steps or rungs, and the inclusion of a pail shelf is optional. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A sectional ladder is a non-self- supporting portable ladder, nonadjustable in length, consisting of two or more sections, and so constructed that the sections may be combined to function as a single ladder. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A telescopic or telescoping ladder is a type of a single ladder with adjustable length through telescoping sections. It is typically lightweight and portable. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A flexible ladder, rope ladder or hanging ladder consists of vertical ropes or chains supporting horizontal, historically round and wooden, rungs. It is commonly used in ships, hiking and mountaineering but some facilities employ flexible ladders as fire exits. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: An extension ladder is a non-self- supporting portable ladder adjustable in length. It consists of two or more sections traveling in guides or brackets or the equivalent and so arranged as to permit length adjustment. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: An articulated ladder or folding ladder is a portable ladder with one or more pairs of locking articulated joints which allow the ladder to be set up in several modes such as a straight or extension ladder, with or without a stand-off, as a regular or double front stepladder, scaffold or work table. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A trestle ladder or extension trestle ladder is a double-front step ladder which includes a vertically adjustable single ladder that can be locked in place. These are used in pairs to supports planks or staging. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: An attic ladder is any form of ladder that is used to access the attic. It can have an articulated, telescopic or extension mechanism. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: The multipurpose ladder combines the features of the step and extension models that increase its versatility. It can be self-supporting or require that you place it against something stable. IDENTIFY THIS TYPE OF LADDER General Tools and Equipment Answer: A duct tape or duck tape is cloth- or scrim-backed pressure-sensitive adhesive tape, often coated with polyethylene. It is a multipurpose tape and is used for general sealing, patching, packing and repairs. IDENTIFY THIS ITEM General Tools and Equipment Answer: Most commonly known as “scotch tape”, a clear adhesive tape or transparent adhesive tape is a multipurpose adhesive tape ideally for basic sealing, holding or mounting. IDENTIFY THIS ITEM General Tools and Equipment Answer: Masking tape or painter’s tape is a type of pressure-sensitive tape made of a thin and easy-to-tear paper. It is available in a variety of widths. It is used mainly in painting, to mask off areas that should not be painted. IDENTIFY THIS ITEM General Tools and Equipment Answer: A drywall tape or joint tape is a rugged paper or mesh that is designed to cover seams in drywall. It is not an adhesive tape but is held in place with a drywall joint compound. IDENTIFY THIS ITEM General Tools and Equipment Answer: A flashlight or torchlight is a portable, handheld electric light. A typical flashlight consists of the light source mounted in a reflector, a transparent cover (sometimes combined with a lens) to protect the light source and reflector, a battery, and a switch, all enclosed in a case. IDENTIFY THIS ITEM General Tools and Equipment Answer: A handheld transceiver, ham radio, “walkie-talkie” or two-way radio is a portable communication device. It is used in various purposes like in large construction sites. IDENTIFY THIS ITEM General Tools and Equipment Answer: A kneelboard or kneeling board is a soft pad support for knees. It is used by different tradesmen for different purposes such as gardening, repairing and construction. IDENTIFY THIS ITEM General Tools and Equipment Answer: A concrete ladder lift or locally known as “portalift” is a motorized lifting machine with a moving bucket along a guide rail. It is commonly used to transfer concrete or other materials to a higher level. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: A manual block splitter is a manual equipment used to split slabs or blocks such as paving blocks or bricks. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: A surface grinder machine, floor grinder or polisher is a machine used to grind several types of floors, but mainly used in concrete. It is used to grind down the concrete, remove coating and polish the substrate. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: A manual tube bender or pipe bender is a tool that is used for bending pipes and tubes of different sizes, materials and radius. The image shows a dual tube bender that has two bending die which allows the too to bend pipe of two different sizes. IDENTIFY THIS TOOL General Tools and Equipment Answer: A mini or micro pipe bender is a smaller and more compact version of a standard manual pipe bender. It is typically used for bending pipes and tubes with diameter not larger than 10mm. IDENTIFY THIS TOOL General Tools and Equipment Answer: An ergonomic pipe bender is a manual pipe bender characterized by its curved handles which are ergonomically designed for easier bending. IDENTIFY THIS TOOL General Tools and Equipment Answer: A free-standing pipe bender is characterized by its free-standing base and a long handle for easier bending. It is used for bending larger and longer pipes. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: The ratchet pipe bender has a ratchet handle which slowly pushes upwards, pushing the pipe to bend between two blocks. This bender is more compact so can be used easily in small spaces and its ratchet mechanism means that it requires less effort from the user to bend the pipe. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: A conduit pipe bender is a manual pipe bender characterized by its single handle. It used the floor or any flat surface for leverage in bending conduit pipes. Conduit pipes for electrical wires are thinner and easier to bend than other types of pipes or tubes. IDENTIFY THIS EQUIPMENT General Tools and Equipment Answer: A spring tubing bender or spring pipe bender is a simple tool that is used to bend copper tubes and pipes. The spring allows the bending of the pipes without kinking. IDENTIFY THIS TOOL General Tools and Equipment Answer: A hand air pump or floor pump is a type of manual pump that is typically used for tires. IDENTIFY THIS TOOL General Tools and Equipment Answer: A glass cutter is a tool used to make a shallow score in one surface of a piece of glass that is to be broken in two pieces. The scoring makes a split in the surface of the glass which encourages the glass to break along the score. The image shows a pencil-type glass cutter. IDENTIFY THIS TOOL General Tools and Equipment Answer: A circular glass cutter is a tool that scores the glass surface in a circular pattern. It is used to cut circular holes or arches on glass. IDENTIFY THIS TOOL General Tools and Equipment Answer: A T-type glass cutter or T-cutter is a glass-cutting tool used for scoring straight and parallel lines on glass surfaces. It helps cutting glass panels with straight sides. IDENTIFY THIS TOOL General Tools and Equipment Answer: Glass corner protectors are triangular protective items used to protect glass and mirror edges during shipping, handling or storing. It is typically made from rubber or plastic. IDENTIFY THIS TOOL General Tools and Equipment Answer: A grease gun is a common workshop and garage tool used for lubrication. The purpose of the grease gun is to apply lubricant through an aperture to a specific point, usually from a grease cartridge to a grease fitting or 'nipple'. IDENTIFY THIS TOOL General Tools and Equipment Answer: A portable tile vibrator or a handheld levelling tool is a tool used for levelling tiles using vibration. This tool employs a suction cup and a small vibrating motor that allows the user to easily level tiles while it is being installed. IDENTIFY THIS TOOL General Tools and Equipment Answer: A floor pliers is a special type of tool used to clamp or anchor tile levelling clips on tiles being installed. It is typically part of a tile levelling system. IDENTIFY THIS TOOL General Tools and Equipment Answer: A wedge-type tile levelling system is a not a single tool but a combination of different tools and devices used to level tiles. It consists of floor pliers, wedges and tile levelling clips. IDENTIFY THIS TOOL General Tools and Equipment Answer: Tile spacers are small objects used and inserted between tiles to provide even spacing for grouting. Common shapes is a cross-shaped spacer and comes with different thicknesses. IDENTIFY THIS ITEM General Tools and Equipment Answer: An anti-lippage tile levelling system is another variation of tile levelling tools. Unlike other systems, this system uses screw-type levelling clips that requires no tools. IDENTIFY THIS TOOL General Tools and Equipment Answer: A mortar spraying machine or hopper gun is used to spray mortar or cement mixtures to surfaces such as walls. These tools is connected to an air compressor. IDENTIFY THIS TOOL General Tools and Equipment Answer: A stucco machine or splatter machine that is used to splatter or fling wet plaster onto a surface. It is used to create splattered or stucco finishes on surfaces. IDENTIFY THIS TOOL General Tools and Equipment Answer: A mortar gun is basically similar to any pneumatic sprayer like paint spray gun. However, this tool is designed for mortar and has a larger cup. It is also connected to an air compressor. IDENTIFY THIS TOOL General Tools and Equipment Answer: Non-contact voltage testers (also known as inductance testers) allows you to check for voltage in wires or devices without you having to touch any wires or parts. The device is like a mini wand with a small tip on the end that senses voltage in such things as electrical wiring, outlets, circuit breakers, lamp cords, light sockets, and switches. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: Neon voltage testers, or neon circuit testers have a small body with a neon light inside and two short wire leads with a metal probe on each end. It can detect voltage but cannot determine the voltage amount. It is also known as a test light, test lamp, voltage tester or mains tester. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: A plug-in circuit analyzer is a device with a power plug and handheld monitor that can determine various information about the circuit it is plugged into. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: An electrical outlet tester, receptacle tester, or socket tester is a small device containing a power plug and three indicator lights, used for quickly detecting some types of incorrectly-wired electrical wall outlets. The tester is easily carried in a pocket, can be used with little training, and can identify some common wiring problems, but can fail to indicate other types of wiring defects. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: A continuity tester is a device that is powered by batteries and has a probe at one end and a cord with either an alligator clip or another probe at the other end. It is used to determine if an electrical path can be established between two points. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: A multimeter or a multitester, also known as a volt/ohm meter or VOM, is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter may include features such as the ability to measure voltage, current and resistance. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: Solenoid voltage testers, also known in the trade by the nickname "wiggies," are also multi-function testers, but they are somewhat simpler and easier to use than the battery-operated multimeters. Both analog and digital models are available. Solenoid volt meters are capable of testing for both voltage and polarity. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: A digital clamp meter functions the same as a multimeter but instead of the touching the conductors, it relies on the principle of magnetic induction to make non-contact AC current measurements. Electric current flowing through a wire produces a magnetic field. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: An antistatic wrist strap, ESD wrist strap, or ground bracelet is an antistatic device used to safely ground a person working on very sensitive electronic equipment, to prevent the buildup of static electricity on their body, which can result in electrostatic discharge (ESD). IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. The image shows a soldering pencil or soldering pen, one of the simples and most common type of soldering iron. IDENTIFY THIS TOOL Electrical Tools and Equipment Answer: A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. The image shows a soldering gun which is basically a gun-shaped soldering iron. IDENTIFY THIS TOOL Electrical Tools and Equipment Answer: A soldering station refers to a set of devices that include the soldering iron (pencil or gun), desoldering tools and hot air guns among others. It is characterized by its temperature control which is not available in a standard soldering pencil or gun. IDENTIFY THIS DEVICE Electrical Tools and Equipment Answer: A desoldering pump, colloquially known as a solder sucker, is a manually-operated device which is used to remove solder from a printed circuit board. It is a hand-held device that supplies heat from metal tips, hot air from nozzle guns and pump-action to remove solder. IDENTIFY THIS TOOL Electrical Tools and Equipment Answer: A desoldering braid, desoldering wick or solder wire, is a finely braided thin copper wire coated with rosin flux. The end of a length of braid is placed over the soldered connections of a component being removed. IDENTIFY THIS ITEM Electrical Tools and Equipment Answer: A soldering bar, solder bar or locally known as “nikolite bar” is a general-purpose soldering alloy (typically of tin and lead). It is commonly used for copper drain piping, tin plating, seaming joints and sheet metal. IDENTIFY THIS ITEM Electrical Tools and Equipment Answer: Wire gauge is a measurement of wire diameter. This tool is important in determining the amount of electric current the wire can safely carry, as well as its electrical resistance and weight IDENTIFY THIS ITEM Electrical Tools and Equipment Answer: Electrical tape (or insulating tape) is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It can be made of many plastics, but vinyl is most popular, as it stretches well and gives an effective and long-lasting insulation. The most common color is black but there are other colors available for different electrical purposes. IDENTIFY THIS ITEM Electrical Tools and Equipment Answer: A friction tape is a type of woven cloth adhesive tape (i.e. cotton) impregnated with a rubber-based adhesive. It is generally used in electrical wires and cables to insulate splices. Its tough surface helps to prevent abrasion and protects wires, cables, and splices from penetration from neighboring systems IDENTIFY THIS ITEM Electrical Tools and Equipment Answer: A fish tape (also known as a draw wire or draw tape or an "electricians snake") is a tool used by electricians to route new wiring through walls and electrical conduit. IDENTIFY THIS ITEM Electrical Tools and Equipment Answer: Cable ties or zip ties are fasteners that bundle your cables and wires together to keep them organized and prevent damage. They come in different sizes, lengths, materials and even colors. IDENTIFY THIS ITEM Electrical Tools and Equipment Answer: A terminal screwdriver or terminal block screwdriver is a special type of screwdriver with a small flathead tip that fits precisely fits in terminal block screws. The flathead tip is smaller because the screws in a terminal block is smaller than the other types of screws. Terminal blocks are insulated devices for grouping of wires. IDENTIFY THIS TOOL Electrical Tools and Equipment Answer: A paint scraper is a tool that has a flat steel blade and a handle of wood, plastic, or metal. Its uses are many, among them removing wallpaper or paint after they've been softened with heat, and it can be wielded in a grip similar to that you use to hold a screwdriver. A single- edge paint scraper is the most basic type of paint scraper. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A paint scraper is a tool that has a flat steel blade and a handle of wood, plastic, or metal. Its uses are many, among them removing wallpaper or paint after they've been softened with heat, and it can be wielded in a grip similar to that you use to hold a screwdriver. The image shows a double-edge paint scraper which can scrape more quickly than single-edge ones. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A floor scraper is a form of a scraper tool similar to a paint scraper that is used to scrape flooring materials or coatings. These tools have broader blades to cover larger areas and longer handles. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A hook scraper is a special type of paint scraper used to scrape stubborn paint and coatings. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A steel wool consists of fine strands of steel matted together into a mass, used as an abrasive. In painting works, it is used to remove grease and corrosion from metal surfaces. IDENTIFY THIS ITEM Painting Tools and Equipment Answer: A paint pad or pad roller is a tool used for applying paints and coatings on trims and edges. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A paint roller is a roller covered in wool, sponge, synthetic fiber, or other absorbent material for applying paint to a surface, especially in interior decorating. The roller sleeve can be plain or textured, depending on the application. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A bristle paint brush is used to apply paint and other coatings on a surface for decorative purposes or visual art. It is made by clamping the bristles to a handle with a ferrule and is available in various sizes, shapes and materials. IDENTIFY THE TYPE OF PAINTBRUSH Painting Tools and Equipment Answer: A foam paint brush is similar in function to a bristle brush but uses foam in applying the paint and other coatings to a surface. It gives a smooth finish and can be used in furniture, cabinetry and trims. IDENTIFY THE TYPE OF PAINTBRUSH Painting Tools and Equipment Answer: A wire brush is a tool consisting of a brush whose bristles are made of wire, most often steel wire. The wire brush is primarily an abrasive implement, used for cleaning rust and removing paint or other coatings. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: Usually made of steel, a paint can opener or paint tin opener has a curved end to open paint cans. The beveled end fits between the lip of the lid and the lip of the can and the bend just past the beveled end allows for leverage to be applied to the lid. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A drop cloth or drop sheet is a fabric or any material used to protect or cover the flooring when painting walls or any vertical surfaces. IDENTIFY THIS ITEM Painting Tools and Equipment Answer: Paint stirrers or stir sticks are disposable wooden sticks that can be used for manually stirring paints. It can be used on smaller cans or tins of paint, instead of using a powered mixer. IDENTIFY THIS ITEM Painting Tools and Equipment Answer: A can spout or pouring spout is an object attached to the lid of a can that helps easier pouring of the paint content. It prevents unnecessary messes while painting. IDENTIFY THIS ITEM Painting Tools and Equipment Answer: A paint tray or roller tray is a tray used to hold paint for decorating with a paint roller, typically having a well and a ridged slope with which to spread paint evenly over the roller. IDENTIFY THIS ITEM Painting Tools and Equipment Answer: A paint guide, trim guard or edger tool is a tool with a blade that is used to paint trims around doors and windows, baseboards and moldings. It helps protecting the other surfaces in a woodwork from unwanted paint stains. IDENTIFY THIS ITEM Painting Tools and Equipment Answer: A paint screen or bucket grid is a perforated tool that is used to rid the roller cover of excess paint, overloading of the cover. It functions like a roller tray directly in a paint bucket. IDENTIFY THIS ITEM Painting Tools and Equipment Answer: An airless paint sprayer or spray gun is an electric tool that propels the pain through the tip of the sprayer using an electric pump, applying extremely high pressure to the paint reservoir. Unlike a compressed air sprayer, this tool does not need to be connected to an air compressor. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A compressed air sprayer or air spray gun is a paint spraying tool that projects the paint out of the tip using compressed air, creating a smooth and even finish. Unlike an electric or airless paint sprayer, this tool is connected an air compressor to function. IDENTIFY THIS TOOL Painting Tools and Equipment Answer: An air brush is a small, air-operated spraying tool that sprays various materials such as paint, ink and dye. It is very similar to a paint spray gun but it is characterized by its more compact size and smaller cup. It is commonly used in smaller and more precise spraying works.- IDENTIFY THIS TOOL Painting Tools and Equipment Answer: A plastic pipe cutter is a type of tubing or pipe cutter that is characterized by a single sharp blade cutting across the pipe. Pipe cutters for PVC pipes have a ratcheting mechanism while pipe cutter for softer plastic such as CPVC and PEX does not. IDENTIFY THE TYPE OF PIPE CUTTER Plumbing Tools and Equipment Answer: A roller-type pipe cutter is a pipe cutting tool that comes in different forms but is characterized by its cutting wheels and rollers that grips the pipe. As the tool revolves around the pipe, it scores the surface until the pipe is totally cut in two. IDENTIFY THE TYPE OF PIPE CUTTER Plumbing Tools and Equipment Answer: A snap pipe cutter or soil pipe cutter is a type of pipe cutting tool used for larger pipes, especially cast-iron pipes. It is characterized by a chain with cutting wheels that is pressed evenly around the pipe, cutting the pipe into two. IDENTIFY THE TYPE OF PIPE CUTTER Plumbing Tools and Equipment Answer: An internal pipe cutter is a special type of tool attached to a power drill and used to cut pipes from the inside. It is commonly used for cutting plastic pipes. IDENTIFY THE TYPE OF PIPE CUTTER Plumbing Tools and Equipment Answer: A thread sealing tape, plumber’s tape, “teflon tape” or technically known as polytetrafluoroethylene (PTFE) is typically used for sealing threaded connections. The tape is sold cut to specific widths and wound on a spool, making it easy to wind around pipe threads. IDENTIFY THIS ITEM Plumbing Tools and Equipment Answer: A faucet or valve key is a removable key that is used to turn off and on a valve or faucet. It is commonly used for emergency faucets that has no handles. It is also known as spigot key. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A sink plunger, cup plunger or standard plunger is the most common and basic type of drain plunger that can be used for sinks in the bathroom, kitchen or bathtubs. This type of plunger works well on a flat surface where the cup can lay flat over the drain and create the vacuum necessary to dislodge the clog. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A flange plunger or toilet plunger is a type of drain plunger most commonly used for unclogging toilets. It has a flange section of rubber which protrudes from the bottom of the cup. This flange is typically foldable allowing the plunger to be used as a cup plunger. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: An automatic plunger is a type of drain tool that uses carbon dioxide cartridges that delivers pressurized air to unblock drainage lines without damaging the pipes and its seals. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A powered plunger is a handheld pump that blasts pressurized air into the blocked pipes or toilet. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: An accordion plunger is a drain plunger that is characterized by its accordion end that is best suited for clearing toilet clogs. It is made of a single piece of molded plastic with several flexible accordion-style ridges and a small cup on the bottom. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A taze plunger is used for clearing large pipes and not the typical household drain clog. A taze plunger consists of a disc sized to fit a particular pipe size, and a long steel rod that pushes the disc into the pipe. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A press-fitting tool is a powered tool used to make a press fitting connection typically for copper pipes. This tool is used to provide positive mechanical interlock and creating a rigid, permanent, leak-tight joint. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A heat welding machine or thermal fusion machine is a heating equipment used to heat plastic pipes especially PPR pipes and connectors to create a heat welded connection. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A hand auger, plumber’s snake or drain snake is a flexible auger that is used to dislodge clogs in plumbing pipes and fixtures. This is used for smaller drains such as kitchen and bathroom sinks. Some models have the hose stored in a canister. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A toilet hand auger or toiler auger is a special type of auger that is designed for unclogging toilet bowls. These may be manual cable type augers or may be powered augers that can be connected to a power drill. The flexible cable used in these types of augers has been specifically designed to easily maneuver and navigate the plumbing connected to a toilet. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A power drain auger, drum auger or drain cleaner is a powered tool that is used to clear larger pipes and drains and heavier blockages. IDENTIFY THIS EQUIPMENT Plumbing Tools and Equipment Answer: Internal pipe wrench is a tool used for the removal of broken threaded ends of pipe, small nipples, pipe plugs and fittings. These tools grip the inside of a pipe or fitting. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: Borescopes are small cameras that are fastened into a flexible, long cable and are inserted into sewer lines and drains. These give professionals a good view of the condition of the piping. IDENTIFY THIS TOOL Plumbing Tools and Equipment Answer: A pipe thawing machine or pipe defroster is an equipment used to thaw frozen pipes. IDENTIFY THIS EQUIPMENT Plumbing Tools and Equipment Answer: Flaring tools use pressure to make a fabricated mechanical joint for joining or sealing copper tubing with a flare connection. Flaring allows you to connect tubes to each other or another kind of fitting. IDENTIFY THIS TOOL Plumbing Tools and Equipment