Professional Documents
Culture Documents
Unskilled 345.00
Semi skilled 385.00
Skilled 435.00
Highly skilled 495.00
Overhead charges 7.50 %
Contractor's profit 7.50 %
Contractor's profit & overhead charges 15.00 %
Labour CESS 1.00 %
1 Providing and fixing to wall or ceiling and floor rigid PVC pipes conforming to ASTM-D-1785/89[Sch-80] and
pipe fittings of the following nominal bore with clamps including making good the wall , ceiling and floor all
complete as per specification.
PH analysis 2013 WATER SUPPLY item no 3.1.4 / P - 100
Data for 10.00 mtr
i 15mm. Diameter
SUPREME 257.00 / 3.0 M
85.66 /M
Deduct 18% GST 15.41
70.25 /M
A.cost of material
15mm dia PVC Sch-80 pipes 10.00 m Rmt 70.25 = Rs 702.50
Pipe Fittings & wastage 15.00 % = Rs 105.37
Wooden plug , clamps cement etc 3.00 % 21.07
807.87
B.Labour
Plumber Fitter 0.67 nos each 435.00 = Rs 291.45
Male worker 0.67 nos each 345.00 = Rs 231.15
522.60
A+B 1330.47
C.Add Contractor's profit &overhead 15.00 % Rs 199.57
charges Total [a+b+c] Rs 1530.04 /10Rmt
or 1770.20 /each
5 Supplying all labour and T&P for fixing long body bib cock of the following size as per specification all
complete (including cost of cock )
PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.15 / P - 134
Data for 10 nos
i 15mm. Diameter
CERA - RIPPLE F1017152
Bib Cock long nose with wall flange & aerator 2075.00 / Each
Deduct 18% GST 373.50
1701.50 / Each
A. Materials:
15mm dia long body Bib cock 10 nos each 1701.50 = Rs 17015.00
b. Labour
Plumber Fitter(S) 0.33 nos each 435 = Rs 143.55
helper to plumber / fitter 0.33 nos each 385 = Rs 127.05
Jointing materials on labour 2.00 % Rs 5.41
17291.01
Add Contractor's profit &overhead 15.00 % Rs 2593.65
charges 19884.66 /10nos
Rate per each 1988.46
CESS 1.00 % 19.88
2008.34 /each
or 2008.30 /each
5 Supplying all labour and T&P for fixing 2 in 1 bib cock of the following size as per specification all complete
(including cost of cock )
PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.15 / P - 134
Data for 10 nos
i 15mm. Diameter
CERA - RIPPLE F1017211
2 way angle cock with wall flange 1885.00 / Each
Deduct 18% GST 339.30
1545.70 / Each
A. Materials:
15mm dia 2 in 1 Bib cock 10 nos each 1545.70 = Rs 15457.00
b. Labour
Plumber Fitter(S) 0.33 nos each 435 = Rs 143.55
helper to plumber / fitter 0.33 nos each 385 = Rs 127.05
or 1827.40 /each
6 Supplying all labour and T&P for fixing CP Angular stop cocks polished bright confirming to IS:781-1995 of the
following nominal sizes as per specification all complete .
PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.16 / P - 134
Data for 10 nos
i 15mm. Diameter
A. Materials:
CERA - RIPPLE F1017201
Angle cock with wall flange 1545.00 / Each
Deduct 18% GST 278.10
1266.90 / Each
15mm dia CP angular stop cock 10 nos each 1266.90 = Rs 12669.00
b. Labour
Plumber Fitter(S) 0.50 nos each 435 = Rs 217.50
helper to plumber / fitter 0.50 nos each 385 = Rs 192.50
or 1520.10 /each
ii 20mm. Diameter
A. Materials:
20mm dia CP angular stop cock 10 nos each 592.40 = Rs 5924.00
b. Labour
Plumber Fitter(S) 0.75 nos each 435 = Rs 326.25
helper to plumber / fitter 0.75 nos each 385 = Rs 288.75
or 760.90 /each
7 Supplying all labour and T&P for fixing CP Concealed stop cocks polished bright confirming to IS:781-1995 of
the following nominal sizes as per specification all complete .
PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.16 / P - 134
Data for 10 nos
i 15mm. Diameter
CERA - RIPPLE F1017351//F4050102
Stop Cock 1660.00 / Each
Deduct 18% GST 298.80
1361.20 / Each
A. Materials:
15mm dia CP concealed stop cock 10 nos each 1361.20 = Rs 13612.00
b. Labour
Plumber Fitter(S) 0.50 nos each 435 = Rs 217.50
helper to plumber / fitter 0.50 nos each 385 = Rs 192.50
or 1629.60 /each
ii 20mm. Diameter
A. Materials:
20mm dia CP concealed stop cock 10 nos each 704.90 = Rs 7049.00
b. Labour
Plumber Fitter(S) 0.75 nos each 435 = Rs 326.25
helper to plumber / fitter 0.75 nos each 385 = Rs 288.75
or 891.60 /each
7 Supplying all labour and T&P for fixing Brass /Gunmetal full way volve confirming to IS:781-1995 of the
following nominal sizes as per specification all complete.
PH analysis 2013 HOUSE SERVICE PIPES item no 3.2.17/ P - 135
Data for 10 nos
i 25mm. Diameter 20mm/25mm
A. Materials:
15mm dia brass /Gun metal fullway
10 nos each 872.40 = Rs 8724.00
volve
b. Labour
Plumber Fitter(S) 0.50 nos each 435 = Rs 217.50
helper to plumber / fitter 0.50 nos each 385 = Rs 192.50
1 Supplying all materials,labour and T&P for fixing water closet ,squatting pan(Indian type.W.C.pan or Orissa pan)
confirming to IS 2556 : Part-3-2004 duly embedded in cement concrete (1:4:8) using 40mm.nominal size h.b.g.
chips [including foot rest for I.W.C. and trap] all complete as per specificationand directon of theEngineer - in -
charge.
PH analysis 2013 Sanitary installation item no 3-4-1 / P-147
CERA ORISSA PAN
CALINA // S3010102 2495.00 / Each
Deduct 18% GST 449.10
2045.90 / Each
I.W.C
A. Materials
Cost of IWC 580mm 1.00 nos each 2045.90 2045.90
Cost of Trap Nahani without Jali each 166.00 166.00
Cement for .12cum cc 0.206 qntl qntl 580.80 = Rs 119.64
sand 0.058 cum cum 48.57 2.81
metal 0.115 cum cum 709.52 81.59
B.Labour
Plumber /Mason 0.50 nos each 435.00 = Rs 217.50
Male mulia 0.50 nos each 345.00 = Rs 172.50
A+B[ labour+material] 2805.94
C.
Add Contractor's profit &overhead 15.00 % Rs 420.89
charges
D.Carriage of materials:
Cement for .12cum cc 0.206 qntl qntl 16.17 3.33
sand 0.058 cum cum 237.67 13.78
metal 0.115 cum cum 607.87 69.90
E.Royality of materials:
sand 0.058 cum cum 35.00 2.03
metal 0.115 cum cum 130.00 14.95
A+B+C 3330.82
Labour CESS 1.00 % Rs 33.3
Rs 3364.12 /each
A+B 474.71
contractors profit &Over head charges o 15.00 % Rs 71.20
Rs 545.91 /Pair
Labour CESS 1.00 % Rs 5.45
Rs 551.36 /Pair
A+B #REF!
contractors profit &Over head charges o 15.00 % Rs #REF!
Rs #REF! /each
Labour CESS 1.00 % Rs #REF!
Rs #REF! /each
4 Supplying all materials,labour and T&P for Supplying all materials,labour and T&P for fixing wash down water
closet (European type W.C.) with integral "S" or "P" trap tothe floor with wooden plug and chromium plated
screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.
PH analysis 2013 Sanitary installation item no 3.4.4/ P-148
White vtreous China wash down water closet [E.W.C.]
CERA CEMELIA-Concealed // Snow White
4040.00 / Each
Deduct 18% GST 727.20
3312.80 / Each
A.Materials
White vtreous
Jointing China
trap with soil EWC with
pipe as 'P' trap
percement
item 1.00 nos each 3312.80 3312.80
C.P. screw,washers,plugs,white
no.3.3.4 [ ii ] excluding sundries and OH LS = Rs 19.95
etc
charges #REF!
Carriage of materials LS = Rs 20.14
#REF!
B.Labour
Plumber (fitter) 0.50 nos each 435.00 = Rs 217.50
Male mulia 0.50 nos each 345.00 = Rs 172.50
390.00
A+B #REF!
Over head charges on A+B 15.00 % Rs #REF!
Rs #REF! /each
Labour CESS 1.00 % Rs #REF!
Rs #REF! /each
5 Supplying all materials,labour and T&P for fixing plastic seat and cover for wash down water closet with
chromium plated brass hinges and rubber buffers all complete as per specification.
PH analysis 2013 Sanitary installation item no 3.4.5/ P-148
Plastic Seat & Cover
CERA CARINA PLUS // Snow White
900.00 / Each
Deduct 18% GST 162.00
738.00 / Each
A.Materials
White Plastic seat and cover 1.00 nos each 738.00 738.00
B.Labour
Fixing charges including sundries ,T&P and carriage of T&P LS = Rs 19.95
A+B 757.95
Over head charges on A+B 15.00 % Rs 113.69
Rs 871.64 /each
Labour CESS 1.00 % Rs 8.71
Rs 880.35 /each
6 Supplying all materials,labour and T&P for fixing of PVC10.00 ltr capacity low level flushing cistern with
manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per
specification.
7 Supplying all materials,labour and T&P for fixing Bowl pattern urinal conforming to IS :2556: part 6-1996
including connecting the urinal of 430x260x350 mm or 340x410x265mm sizes respectively with waste pipe by
means of white lead mixed with choppedhempetc. all complete as per specification.
8 Supplying all materials,labour and T&P for fixing glazed earthen-ware squatting plate of size (600 mmx350mm.)
confirming to IS : 2556-part-6-1995 with integral longitudinal flushing pipe including embedding the plate in
25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:4:8) using 40mm. size h.b.g. chips all complete
as per specification.
PH analysis 2013 Sanitary installation item no 3.4.9/ P-150
One - seated Urinal 600 x 355 mm size
A Materials
A.Vitreous china squatting plate urinal 1.00 nos each 1397.40 1397.40
Cement ,sand grit etc. 16.08
Carriage of materials 19.95
B.Labour
Plumber (fitter) 0.50 nos each 435.00 = Rs 217.50
Mason. 0.50 nos each 435.00 = Rs 217.50
Male mulia 1.00 nos each 345.00 = Rs 345.00
A+B 2213.43
D. oh charges etc.
Over head charges contractors profit 15.00 % Rs 332.01
Rs 2545.44 /each
9 Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar taps confirming to IS
2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to
the damages etc. all complete as per specification.
PH analysis 2013 Sanitary installation item no 3.4.11/ P-151
Vitreoous china flat back Wash hand basin 460x350x180mm
CERA CHIME // Snow White
Cat No. S2040139 1830.00 / Each
Deduct 18% GST 329.40
1500.60 / Each
A. Materials
Cost of wash hand basin 460x350x180 1.00 nos each 1500.60 1500.60
CI bracket for wash basin and sinks 53.00 % 132 185.00
Waste pipe 32x1150mm 80.00 % 59.32 139.32
Cement, sand and wooden plugs etc. LS = Rs 24.02
1848.94
B.Labour
Plumber (fitter) 0.33 nos each 435.00 = Rs 143.55
Mason. 0.33 nos each 435.00 = Rs 143.55
Man mulia 0.67 nos each 345.00 = Rs 231.15
518.25
A+B 2367.19
Over head charges contractors profit 15.00 % Rs 355.07
Rs 2722.26 /each
Labour CESS 1.00 % Rs 27.22
Rs 2749.48 /each
9 Supplying all materials,labour and T&P for fixing corner wash hand basin with hole for pillar taps confirming to
IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good
to the damages etc. all complete as per specification.
PH analysis 2013 Sanitary installation item no 3.4.11/ P-151
Vitreoous china corner Wash hand basin 16" x 16"
A. Materials
Cost of wash hand basin 550x400 1.00 nos each 960.70 960.70
CI bracket for wash basin and sinks 53.00 % 132 185.00
Waste pipe 32x1150mm 80.00 % 59.32 139.32
Cement, sand and wooden plugs etc. LS = Rs 24.02
1309.04
B.Labour
Plumber (fitter) 0.33 nos each 435.00 = Rs 143.55
Mason. 0.33 nos each 435.00 = Rs 143.55
Man mulia 0.67 nos each 345.00 = Rs 231.15
518.25
A+B 1827.29
Over head charges contractors profit 15.00 % Rs 274.09
Rs 2101.38 /each
Labour CESS 1.00 % Rs 21.01
Rs 2122.39 /each
11 Supplying all materials,labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983
with cast iron bracet and stainless steel plug including painting of fittings and brackets ,cutting and making good
to the walls etc. all as per specification including cost of sink with all accessories.
PH analysis 2013 Sanitary installation item no 3.4.14/ P-152
sink 24"x18"10" (Parryware)
CERA SILA
Cat No. B4721501 6535.00 / Each
Deduct 18% GST 1176.30
5358.70 / Each
A.Materials
Cost of Sink 1.00 nos each 5358.70 5358.70
castiron brackets[one pair] 2.00 264.00 528.00
Cement, sand and wooden plugs etc. LS = Rs 40.29
Painting of bracketsetc. LS 40.10
Carriage of materials LS 20.14
5987.23
B.Materials
Plumber (fitter) 0.220 nos each 435.00 = Rs 95.70
Mason. 0.600 435.00 261.00
Man mulia 0.820 nos each 345.00 = Rs 282.90
639.60
A+B 6626.83
Over head charges on A+B 15.00 % Rs 994.02
Rs 7620.85 /each
Labour CESS 1.00 % Rs 76.20
Rs 7697.05 /each
13 Supplyingfitting fixing of PVC waste pipe of following nominal diameter of wash basin or sink inclusing brass
check nut complete as per specification.
PH analysis 2013 Sanitary installation item no 3.4.20/ P-155
A.Materials
Semirigid PVC waste pipe for sink and
wash basin 32mm dia with length not
less than 700mm with PVC waste fittings 1.00 nos each 42.37 42.37
Carriage of materials LS 30.22
72.59
Over head charges on A+B 15.00 % Rs 10.88
Rs 83.47 /each
Labour CESS 1.00 % Rs 0.83
Rs 84.30 /each
19 Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets
and guard rails fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per
specification.
PH analysis 2013 Sanitary installation item no 3.4.27/ P-159
Glass self :- (per each)
A.Materials
CERA
F5005301 4035.00 / Each
Deduct 18% GST 726.30
Cost of Glass shelf 600x120mm with 3308.70 / Each
anodised aluminum angle frame CP brass 1.00 nos each 3308.70 = Rs 3308.70
bracket and50mm
Rawl plug guard rail of standrad size 2.00 nos each 10.00 = Rs 20.00
25mm cp screw 4.00 nos each 1.12 = Rs 4.48
Cement, sand and chips and carriage of
LS = Rs 6.20
materials
3339.38
B.Materials
Carpenter 0.25 nos each 435.00 = Rs 108.75
Man mulia 0.25 nos each 345.00 = Rs 86.25
195.00
A+B 3534.38
Over head charges on A+B 15.00 % Rs 530.15
Rs 4064.53 /each
Labour CESS 1.00 % Rs 40.64
Rs 4105.17 /each
21 Supplying all materials,labour and T&P for fixing standard size C. P. towel ring fixed fixed to wooden plugs
with cromium plated brass screws complete as per specification.
PH analysis 2013 Sanitary installation item no 3.4.29/ P-160
Chromium plated towel ring:-
CERA
F5003105 910.00 / Each
Deduct 18% GST 163.80
746.20 / Each
A.Materials
Cost of towel ring 1.00 nos each 746.20 = Rs 746.20
Carriage of materials and fixing charges LS 30.22
776.42
Over head charges on A+B 15.00 % Rs 116.46
Rs 892.88 /each
Labour CESS 1.00 % Rs 8.92
Rs 901.80 /each
22 Supplying all materials,labour and T&P for fixing of [A] liquid soap container - glass container or plastic
container with chromium plated brass lid and brackets fixed to wooden plugs with chromium plated brass screws
[B] cromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plugs with
chromium plated brass screws [ C] white glased tooth brush holder fixed to wooden plugs with chromiumplated
brass screws as per specification
27 Laying (to level or slopes) and jointing with rubber rings pre-cast reinforced socket and spigot concrete pipes
Class NP-2 conforming to IS:458 - 2003 suitable for rubber ring roll on joint of the following internal diameter as
per specification complete.(Earthwork in trenches to be measured and paid for separately)