Zamily +e) Slate Jol is 5
Pumccnevien ZAMIL OFFSHORE SERVICES COMPANY
OFFSHORE HOOK UP, UPGRADE MODIFICATION, SCADA INSTALLATION
‘AND COMISSIONING SUPPORT
(CONTRACT: 6600044802)
TOOL BOX TALK
Location: QMS OMAR Date: 26-DEC-2021
Start Time:06:30 PM TBT Log No :TBQM-OMAR-COAT-104
‘Meeting Duration:30 Minutes Number of Attendees: +
‘Topics Discussed:
* MEASURING AND MONITORING DEVICES CALIBRATION AS PER
SCHEDULE Q.
PARTICIPANTS
[Sl] Zamil Emp. | Aramco 1D 7] Name of Attendee] Position [Siamatare 1
no. |i TQAMA | |
1 | esas #343826 | AnouLuaRl [meen onewan [Agito |
TRO 7
2 | sumcon | azesiess [aman | BRA a
sue-con | ea7sasa | ansiapionanion | arpucaron | unvC—
5
é
7
3
; 1
QC Inspector : QC Supervisor
‘Name : UMER SAEED KHAN Name FRANCIS BINUYA
Discipine: COAT, Dscpine: GATING S
Signature: Signature:
oo 26-22)
eee
TBT Log No: TRQM- OMAR-COAT-104 Page 1* MEASURING AND MONITORING DEVICES CALIBRATION AS PER
SCHEDULE Q.
Schedule Q Att-IV Para 7.1.
Control of inspection, measuring and testing equipment shall be as per
contractor procedures.
Specific tools and equipment shall be identified to make and perform tests in the
field with instructions for their use, calibration, and storage.
The CONTRACTOR shall identify, maintain, control, adjust, and calibrate all
tools, gauges, instruments and -other measuring and testing devices used for
controlling quality.
Calibration shall be performed at established periods as specified in the most
stringent of COMPANY standards, other applicable standards, or manufacturer
recommendations; if no standards apply, the calibration cycle shall not exceed
six months.
CONTRACTOR shall provide backup equipment when the primary equipment
is being calibrated or tested.
Page 2