Zamily 42) Shes Jolie
comncnwen ZAMIL OFFSHORE SERVICES COMPANY
OFFSHORE HOOK UP, UPGRADE MODIFICATION, SCADA INSTALLATION —
AND COMISSIONING SUPPORT
(CONTRACT : 6600044802)
‘TOOL BOX TALK
Location: QMS OMAR. Date: 08"-MAR-2022
Start Time:18:00 PM ‘TBT Log No :TBQM-OMAR-COAT-145
Meeting Duration:s0 Minutes Number of Attendees: +
Topics Discussed:
* Clean the substrate after abrasive blasting SAES-H-004 Para
8.4.
PARTICIPANTS
[S| Zamil Emp. | Arameo ID 7 | Name of Avendse | Postion Tignature
me | fama
1 | aos | asist [aromowowow | vec rowan LofodG
2 | toswe | ssesere[nooecwninsn | aroucaron | ony a
3 | ese | e2ae77[wmmwannsia [ausraroanien] (addy
i
5
r + |
7
i
7
| —
QC inspector: Qc Supervisor
‘Name MUHAMMAD RIZWAN Name UYA
Disciptin coay Discipline
Signature: Signatui
Cr
‘TAT Log No: TEQM- OMAR-COAT-145, Page 1* Clean the substrate after abrasive blasting SAES-H-004 Para 8.4.
1, Spent abrasive shall be removed from the cleaned
surfaces by dry brushing and/or blowing down or vacuum
cleaning with clean, dry compressed air. Internal surfaces
shall be dry brushed and vacuum cleaned. After cleaned
surface, residual dust level shall be checked and dust
rating shall be level 2 or better in accordance with ISO
8502-3 as per SAES-H-004 Para 8.4.1.
2. Cleaned surfaces shall be primed or coated before the
surface condition degrades below the specified
cleanliness level requirement as per SAES-H-004 Para
8.4.2.
3. After blasting, test the substrate for the chloride content.
Residual chloride shall not exceed 40 mg/m? for external
and 20 mg/m? for internal coating. Wash down the surface
with sweet water to remove chloride contamination.
Chloride test shall follow the water wash down until the
correct value is achieved in accordance with ISO 8502-6
as per SAES-H-004 Para 8.4.3.
4. Abrasive blast cleaned surfaces shall be re-inspected prior
to priming or coating if the surfaces are held for more than
4 hours after blasting. Correction shalll be done and
retested before coating application as per SAES-H-004
Para 8.4.4.
5. Abrasive blasting residue shall be cleaned up regularly at
the area other than those being blasted as per SAES-H-004
Para 8.4.5.
IT Log No: TBQM- OMAR-COAT-145 Page 2