Professional Documents
Culture Documents
Important!
When working on the oil, coolant or fuel
circuit, you must protect the alternator
against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may
result in an alternator malfunction.
If the charge air hoses are not fitted dry
and without grease, this will result in
supercharger failure.
Fit charge air hoses dry and without
grease.
11/29/2021 2/27
BMW M57 Diesel Engine - Repair Manual 29
Removal:
Removal of cylinder head is described
separately from installation. Assembly
sequence for removal and installation is
different.
Note:
Some illustrations show the engine
removed.
Remove engine shield at bottom.
Installation note:
The bearing pins are micro-encapsulated
and must be replaced.
Important!
To eliminate the risk of the valves being
damaged when the camshafts are
subsequently fitted, make sure that none
of the pistons is at TDC.
Note:
Worn rocker arms may only be reused on
the same grooves of the camshaft.
Important!
The glow elements protrude at the
sealing surface and may be damaged
when the cylinder head is put down.
Remove cylinder head and set down in
such a way that glow elements are not
damaged.
11/29/2021 12/27
BMW M57 Diesel Engine - Repair Manual 39
Installation note:
Tightening torque 12 23 2AZ.
Installation:
Installation of cylinder head is described
separately from removal. The assembly
sequence differs between removal and
11/29/2021 13/27
BMW M57 Diesel Engine - Repair Manual 40
installation.
Note:
Clean sealing surface of cylinder head
and engine block.
Remove gasket remnants with hardwood
scraper.
Do not allow any gasket remnants to fall
into the oilways and coolant ducts.