Professional Documents
Culture Documents
All Pile GIL Bridge 2
All Pile GIL Bridge 2
Loads:
Load Factor for Vertical Loads= 1.0
Load Factor for Lateral Loads= 1.0
Loads Supported by Pile Cap= 0 %
Shear Condition: Static
Profile:
Pile Length, L= 19.0 -m
Top Height, H= -1.0 -m
Slope Angle, As= 0
Batter Angle, Ab= 0
Note: If the program cannot find a result or the result exceeds the upper limit. The result will be displayed as 9999.
The Max. Moment calculated by program is an internal force from the applied load conditions. Structural engineer has to check whether
the pile has enough capacity to resist the moment with adequate factor of safety. If not, the pile may fail under the load conditions.
2 2
yt=0 at 3.2-m
9.8 13.5 23.4 49.8 1.07
4 St=0 at 4.1-m Silt (Phi + C) 4
22 22
24 24
26 26
28 28
30 30