Professional Documents
Culture Documents
Date : 11.22.2023
Project : FCCC
Designed by :
Project No :01
Checked by :
For beams
E*Ibeam = 7111.33
Ic
= 3.5
Client :PrimeAE
Date : 11.22.2023
Project : FCCC
Designed by :
Project No :01
Checked by :
k*lu/r =
Stability properties
Density of concrete = 150 pcf
Grade of column = 5000 psi
Width of column = 24 in
Depth of column = 24 in
Length of the column = 282 in
Factored load, Pu = 177.39 kip
M1(bottom) = 1.76 kip-ft
Mminor
M2(top) = 3.43 kip-ft
M1(bottom) = 115.5 kip-ft
Mmajor
M2(top) = 64.25 kip-ft
Stability properties
The stability index for a story, Q, shall be calculated by
Q = 0.28
Client :PrimeAE
Date : 11.22.2023
Project : FCCC
Designed by :
Project No :01
Checked by :
.
Critical buckling load, Pc =
(clause-6.6.4.5.1)
Here the effective length factor k is calculated using Ec in accordance with 19.2.2 as below
For values of wc between 90 and 160 lb/ft3
where (clause-19.2.2.1.a)
E c= 4286.83 ksi
I= 24192 in^4
βdns= 0.6 (clause-R6.6.4.4.4)
k= 0.95 (clause-6.6.4.4.3)
= 64816805.3208425 kips-in^2
For columns, (EI)eff shall be calculated in accordance with (a), (b), or (c):
where Bdns = ratio of maximum factored sustained axial load to maximum axial load
I = moment of inertia
Cm = 0.6+0.4(M1/M2)
= 0.83
δs = 0.816 < 1
M min = 99.1 kip ft
M2 = 115 > m2 min
Mc2 = 1*95
= 115 kipft
Moments M1 and M2 at the ends of an individual column shall be calculated by (a) and (b)
thus
M1 = 153.5 (M1ns+δM1s) kip ft
M2 = 117.1 (M2ns+δM2s) kip ft
The moment magnifier δs, shall be calculated by (a) (b) (C ) and if δs exceeds 1.5 , only (b) or (C ) shall be permitted
a) δs = (1/1-Q)>1
= 0.72 >1
b) δs = 0.75 >1
Client :PrimeAE
Date : 11.22.2023
Project : FCCC
Designed by :
Project No :01
Checked by :
P Delta analysis
This effect can be included in equation 6.6.4.6.2a by writing the denominator as (1-1.15Q)
δs = 1 >1 (6.6.4.6.2a)
1-1.5Q
Flexural members shall be designed for the total magnified end moments of the columns at the joint
Second order effects shall be considered along the length of columns in sway frames
It shall be permitted to account for these effects using
Therefore δs = 0.58
Client :PrimeAE
Date : 11.22.2023
Project : FCCC
Designed by :
Project No :01
Checked by :
For beams
E*Ibeam = 7111.33
Ic
= 3.5
Client :PrimeAE
Date : 11.22.2023
Project : FCCC
Designed by :
Project No :01
Checked by :
k*lu/r =
Stability properties
Density of concrete = 150 pcf
Grade of column = 5000 psi
Width of column = 24 in
Depth of column = 24 in
Length of the column = 282 in
Factored load, Pu = 177.39 kip
M1(bottom) = 1.76 kip-ft
Mminor
M2(top) = 3.43 kip-ft
M1(bottom) = 115.5 kip-ft
Mmajor
M2(top) = 64.25 kip-ft
Stability properties
The stability index for a story, Q, shall be calculated by
Q = 0.28
Client :PrimeAE
Date : 11.22.2023
Project : FCCC
Designed by :
Project No :01
Checked by :
.
Critical buckling load, Pc =
(clause-6.6.4.5.1)
Here the effective length factor k is calculated using Ec in accordance with 19.2.2 as below
For values of wc between 90 and 160 lb/ft3
where (clause-19.2.2.1.a)
E c= 4286.83 ksi
I= 24192 in^4
βdns= 0.6 (clause-R6.6.4.4.4)
k= 0.95 (clause-6.6.4.4.3)
= 64816805.3208425 kips-in^2
For columns, (EI)eff shall be calculated in accordance with (a), (b), or (c):
where Bdns = ratio of maximum factored sustained axial load to maximum axial load
I = moment of inertia
Cm = 0.6+0.4(M1/M2)
= 0.83
δs = 0.816 < 1
M min = 99.1 kip ft
M2 = 115 > m2 min
Mc2 = 1*95
= 115 kipft
Moments M1 and M2 at the ends of an individual column shall be calculated by (a) and (b)
thus
M1 = 153.5 (M1ns+δM1s) kip ft
M2 = 117.1 (M2ns+δM2s) kip ft
The moment magnifier δs, shall be calculated by (a) (b) (C ) and if δs exceeds 1.5 , only (b) or (C ) shall be permitted
a) δs = (1/1-Q)>1
= 0.72 >1
b) δs = 0.75 >1
Client :PrimeAE
Date : 11.22.2023
Project : FCCC
Designed by :
Project No :01
Checked by :
P Delta analysis
This effect can be included in equation 6.6.4.6.2a by writing the denominator as (1-1.15Q)
δs = 1 >1 (6.6.4.6.2a)
1-1.5Q
Flexural members shall be designed for the total magnified end moments of the columns at the joint
Second order effects shall be considered along the length of columns in sway frames
It shall be permitted to account for these effects using
Therefore δs = 0.58