Professional Documents
Culture Documents
Activity summary:
This worksheet will be used as evidence regarding your work within the following
competencies:
Safety precautions:
1. Personal protective equipment (PPE) must be worn.
2. Follow all standard operating procedures (SOP).
3. Follow manufacturers’ instructions.
4. Refer to relevant safety data sheet (SDS).
Teacher/supervisor signature:
Date:
Unit 48 Worksheet
To accompany May & Simpson Automotive Mechanics 10e
© McGraw-Hill Education Australia 2018
2
YES NO
Student Did you find these tasks difficult to complete? □ □
to
Did the outcomes of the activity meet your needs? □ □
complete
Were the tasks relevant to the type of work carried out in your workplace? □ □
Did the instruction given to you prior to and during this activity assist you in □ □
completing the tasks?
Additional student comments:
Name of workplace:
Student name:
Student signature:
Date:
Unit 48 Worksheet
To accompany May & Simpson Automotive Mechanics 10e
© McGraw-Hill Education Australia 2018
3
__________________________________________________________
__________________________________________________________
2. What is the name of the governing body within each state and territory which assists with
administration of the environmental regulations?
__________________________________________________________
3. List the various pieces of legislation relating to environmental and sustainability best
practice that the automotive industry must comply with:
a.
__________________________________________________________
b.
__________________________________________________________
c.
__________________________________________________________
d.
__________________________________________________________
e.
__________________________________________________________
f.
__________________________________________________________
Unit 48 Worksheet
To accompany May & Simpson Automotive Mechanics 10e
© McGraw-Hill Education Australia 2018
4
4. Name some of the automotive liquid wastes that can be collected and recycled:
a.
__________________________________________________________
b.
__________________________________________________________
c.
__________________________________________________________
d.
__________________________________________________________
e.
__________________________________________________________
f.
__________________________________________________________
a.
__________________________________________________________
b.
__________________________________________________________
c.
__________________________________________________________
d.
__________________________________________________________
e.
__________________________________________________________
f.
__________________________________________________________
6. When waste (both solid and liquid) is required to be stored outside, what basic steps must
be taken to eliminate contamination?
__________________________________________________________
__________________________________________________________
Unit 48 Worksheet
To accompany May & Simpson Automotive Mechanics 10e
© McGraw-Hill Education Australia 2018
5
__________________________________________________________
__________________________________________________________
__________________________________________________________
8. With regard to air quality within an automotive workshop, what are the hazards that
workers should be aware of?
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
10. What is the most likely outcome for an individual who is exposed to excessive noise?
__________________________________________________________
__________________________________________________________
__________________________________________________________
12. What can be installed into a wash bay to capturing waste entering the drain?
__________________________________________________________
13. Provide four procedures that could be used to reduce the possibility of workshop waste
products from entering storm water and waste water drainage systems:
a.
__________________________________________________________
b.
__________________________________________________________
c.
__________________________________________________________
Unit 48 Worksheet
To accompany May & Simpson Automotive Mechanics 10e
© McGraw-Hill Education Australia 2018
6
d.
__________________________________________________________
14. Trade waste water is a common liquid byproduct of an automotive workshop. What are
the common causes of trade waste water?
a.
__________________________________________________________
b.
__________________________________________________________
c.
__________________________________________________________
d.
__________________________________________________________
15. Explain how you would reduce the amount of airborne particles within an automotive
workshop:
__________________________________________________________
__________________________________________________________
__________________________________________________________
16. Name two gasses commonly used within the automotive industry that cause harm to the
atmosphere:
__________________________________________________________
17. How can common harmful gasses be restricted from entering the workplace?
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
Unit 48 Worksheet
To accompany May & Simpson Automotive Mechanics 10e
© McGraw-Hill Education Australia 2018