Professional Documents
Culture Documents
Fig 1
2. Calculate the value of Vth and Rth between terminals B and C of the circuit [CO3] 4 Short
shown in Fig 2. All resistance values are in ohms. Answer
Fig 2
Page 1 of 3
3. Calculate V0 of the following circuit (Fig 3) using nodal analysis. [CO3] 3 File
Upload
Fig 3
4. Using the superposition theorem, calculate the value of Vo in the circuit of [CO3] 4 File
Fig. 4. upload
Fig 4
5. Identify the value of I1 and I2 of the following circuit (Fig. 5) [CO1] 2 Short
Answer
Fig 5
Page 2 of 3
6. Read all the statements below and find the correct answers. You may select [CO1] 2 Multiple
more than one option. Choice
[a] Ohm’s law is applicable for all elements and all conditions.
[b] Current can flow through an open circuit.
[c] Thevenin Theorem cannot be applied in circuits where the
resistance of a component changes with voltage or current.
[d] In a circuit if all the resistance have equal value then Ry<Rdel.
7. Suppose Req is equal to the last two digits of your student ID. Calculate the [CO3] 3 File
value of R from the following figure (Fig 6) Upload
Fig 6
Page 3 of 3