This document describes a circuit with one light bulb that can be controlled by two three-way switches located in different locations. The circuit connects the ground wire from the power source to the bulb ground and the live wire from the source to the common terminal on the first three-way switch. It then connects the bulb to the common terminal on the second three-way switch and connects the remaining wires between the two switches so that either switch can control the bulb.
This document describes a circuit with one light bulb that can be controlled by two three-way switches located in different locations. The circuit connects the ground wire from the power source to the bulb ground and the live wire from the source to the common terminal on the first three-way switch. It then connects the bulb to the common terminal on the second three-way switch and connects the remaining wires between the two switches so that either switch can control the bulb.
This document describes a circuit with one light bulb that can be controlled by two three-way switches located in different locations. The circuit connects the ground wire from the power source to the bulb ground and the live wire from the source to the common terminal on the first three-way switch. It then connects the bulb to the common terminal on the second three-way switch and connects the remaining wires between the two switches so that either switch can control the bulb.
PROCEDURE 1. Connect the ground wire of the source to the ground wire Circuit Breaker of the bulb 2. Connect the live wire from the source to the Common wire of the 3-way switch 1 3. Connect the middle wire of the Lamp to the Common wire of the 3 way switch 2 4. Connect the remaining wires of the 3-way switch 1 to of each wire of the 3- Switch 2 (Interchangeable).