Professional Documents
Culture Documents
(EL-1004)
LABORATORY MANUAL
FALL 2023
(LAB # 01)
Familiarization to Proteus and Lab Equipment
_______________________________
LAB ENGINEER SIGNATURE & DATE
TASK NO 1:
Procedure:
TASK NO 2:
Procedure:
1. In this circuit, the main motive was to calculate the voltage and current.
2. First , I made the simulation of circuit.
3. In this circuit a dc voltage source , a diode ,dc voltmeter , dc ammeter , 1k-ohm resistor
has been used.
4. The voltmeter is connected in parallel because the voltage is same in parallel circuit and
ammeter is connected in series because the current is same in series circuit.
0.0 0 0 0
0.2 0.2 0 0
0.4 0.4 0 0
0.6 0.57 0.03 0.052
0.8 0.611 0.19 0.31
1.0 0.63 0.37 0.587
1.2 0.64 0.56 0.875
1.4 0.65 0.75 1.15
1.6 0.63 0.95 1.50
1.8 0.66 1.14 1.72
2.0 0.66 1.34 2.03
3.0 0.68 2.32 3.41
4.0 0.69 3.31 4.79
5.0 0.69 4.31 6.24
6.0 0.70 5.30 7.5
7.0 0.70 6.30 9
8.0 0.71 7.29 10.26
9.0 0.71 8.29 11.6
10.0 0.72 9 12.5