Professional Documents
Culture Documents
tF
u
lo
a
c
d
M
s
n
m
ie
S
SIREMOBIL Compact / L
SP
Disposal Instructions
System
10409105
© Siemens 2008
The reproduction, transmission or use
of this document or its contents is not
permitted without express written
authority. Offenders will be liable for
damages. All rights, including rights
created by patent grant or registration
of a utility model or design, are
reserved.
Disclaimer
The installation and service of equipment described herein is to be performed by qualified
personnel who are employed by Siemens or one of its affiliates or who are otherwise autho-
rized by Siemens or one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated with
or authorized by Siemens or one of its affiliates are directed to contact one of the local
offices of Siemens or one of its affiliates before attempting installation or service proce-
dures.
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Disposal list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
System overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Circuit board in MEMOSKOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
The proper disposal of hazardous materials is an issue at the time a system or device is
scrapped, as well as during its operating life when components containing problematic
materials are replaced.
The list of hazardous materials (arranged by product) in these instructions gives an over-
view of the disposal requirements of the various components and assemblies. The disposal
information and graphics will assist you in locating these hazardous materials in the sys-
tem.
• The items in the following table are to be disposed of by a suitable disposal company.
Lead
X-ray tube unit C-arm, bottom (1/Fig. 1 / p. 6) Oil
1
Implosion danger of X-ray
tube
Tube assembly colli- C-arm, bottom of (2/Fig. 1 / p. 6) Lead
mator the X-ray tube 1
assembly
X-ray image intensi- I.I. housing, (3/Fig. 1 / p. 6) Lead
fier, 17 and 23 cm. inserted in hous- Implosion danger of I.I. 1
ing tube
X-ray image intensi- C-arm, top: lead (4/Fig. 1 / p. 6) Lead
fier, 17 and 23 cm. inserted in cap Implosion danger of I.I. 1
tube
Counterweight: only C-arm, top: lead (4/Fig. 1 / p. 6) Lead 1
for 17 cm I.I. installed in I.I.
Counterweight: only C-arm: in the (5/Fig. 1 / p. 6) Lead 1
for 23 cm I.I. shaft, near the
X-ray tube
assembly
Basic unit Electronics box (6/Fig. 1 / p. 6) Lead 1
Monitor(s) Monitor trolley, (7/Fig. 1 / p. 6) Implosion danger of pic- 1/2
top ture tube
MULTISPOT In the monitor (8/Fig. 1 / p. 6) Implosion danger of pic- 1
optional trolley ture tube inside the MULTI-
SPOT
Battery MEMOSKOP (9/Fig. 1 / p. 6) Lithium 2
C-E/C/C-SUB in (1/Fig. 2 / p. 7)
monitor trolley