Professional Documents
Culture Documents
ETAP Page: 1
19.0.1C
Location: Date: 03-16-2024
Contract: SN:
Engineer: Revision: Base
Study Case: ANSI Duty
Filename: SLD VLPC~~ Config.: Normal
* The terminal short-circuit current of the single-phase loads is calculated in the Panel/UPS/1Ph System Device Duty calculation.
The terminal short-circuit current of the three-phase loads is calculated in the three phase Device duty calculation.
Project:
ETAP Page: 2
19.0.1C
Location: Date: 03-16-2024
Contract: SN:
Engineer: Revision: Base
Study Case: ANSI Duty
Filename: SLD VLPC~~ Config.: Normal
* The terminal short-circuit current of the single-phase loads is calculated in the Panel/UPS/1Ph System Device Duty calculation.
The terminal short-circuit current of the three-phase loads is calculated in the three phase Device duty calculation.