Professional Documents
Culture Documents
MAC PC Reset Proc
MAC PC Reset Proc
Place, Leonard
From: ARAMARK CTS Network on behalf of Zamora, Jerry A. Sent: Thu 1/12/2006 7:52
To: cenet@LISTSERV.ARAMARKSVM.COM
Cc:
Subject: Re: MAC PC
Attachments:
You might try to reset the bat manufacturing menu (page 2-12 tru 2-15 in manual) to do this get into the manf. menu by
holding down the F1-1 and F5-0 key and power up the unit it will ask for a password the PW should be MACPC when the
menu appears type in bat (be shure you have a fully charge battery if you think that the battery is fully discharged type in
0 (zero) in the af mentioned sentence) when the prompt comes up type in 50 enter then type sav enter then to get out of
the menu type end enter
Good luck
JAZ
________________________________
Hi All,
I hope someone can help with this issue. We have a couple MAC PC EKG's that continue to give and error... Battery is
0/50
Aborting
We have a new battery showing 18.75 volts, a power supply showing 28.00 volts. We even try to reset battery setting in
system and both systems will not hold for long, until they error again the same Aborting.
Any ideas?
Thanks,
********************************************************************************
This message and any included attachments are from the ARAMARK CTS List
and are intended only for the addressee(s). The information contained
herein may include trade secrets or privileged or otherwise confidential
file://C:\DOCUME~1\placel\LOCALS~1\Temp\4VTDTJ8D.htm 11/1/2007
Page 2 of 2
file://C:\DOCUME~1\placel\LOCALS~1\Temp\4VTDTJ8D.htm 11/1/2007