Professional Documents
Culture Documents
Tims Dicom 09-18-09a
Tims Dicom 09-18-09a
FORESIGHT IMAGING
TIMS
TECHNICAL TRAINING
Auto-SYNC Auto-SYNC
• Auto-SYNC Session • Foresight strength
• Allows us to configure to ANY modality
• Creates video configurations files for use in
TIMS
• Automatically measures and defines video
parameters
• Auto-SYNC Procedure different between
SDTV & Analog RGB / Monochrome
Auto-SYNC Tips
• To alter aspect ratio: run Auto-SYNC filter:
Contrast / Brightness
• Pixel Reader in “Full Window” mode
• Histogram in “Quad Window”
• Adjust Black Level for “Blackness””
• Adjust Gain to “Whiteness”
• Insure black level / gain not “clipped”
Glossary Glossary
• Htotal (in Pixels) • Horizontal Back Sync- HBS (in Pixels)
– Total # of pixels per line – Counts from leading edge of H-Sync to Active
– Determines sample clock rate video
– Determines Aspect ratio – Includes H-Sync & H-Back Porch
• Phase Delay - (in nanoseconds) • Width (in Pixels)
– Shift of pixel clock position (phase) – Counts from end of HBS value
– Determines # of pixels captured
Miscellaneous Troubleshooting
• Set AOI in Preview Window • Network / Connection issues
– Verify IP & network connections are valid
• Set Disk Usage Level 50% to 90 % • Video connections
– Connections
• Monochrome Mode set in 3 places – Splitter
– Auto-SYNC - (in pixel type drop-down), – Termination
– To test, connect TIMS direct to source
Monochrome
• Trigger
– TIMS ~ Channels, Image Menu, Gray_8 – Disconnect from source & short TIMS input to jacket
– TIMS ~ Channels, DICOM, File Save Options, – This forces trigger
• Image Quality
Monochrome2 – Adjust with Auto-SYNC
Troubleshooting Troubleshooting
• Common workflow issues
• PACS connectivity – Auto send / save not configured
– DMWL not configured
– Verify AE, IP & port are correct – Common / repetitive tag entries not pre-set
• Common error messages
– Ping PACS IP address – File time / length too long
– Three ways to reduce file size:
– Import TIMS file to PACS • Increase compression
• Increase decimation rate
• Reduce image by defining & capturing AOI only
– Use TIMS DICOM analyzer to compare files – No local Windows admin rights
– Country / Region settings not compatible with TIMS
– Verify TIMS AE title valid & authorized on • Date or number settings issues
• Date format may need to match PACS format
PACS • Windows crashes
– Disk drive full
– Delete studies, set disk level
– Verify TIMS only application invoked
Troubleshooting Troubleshooting
• Printer access Files required by Foresight Support
• CHP File & Auto-SYNC log file
– Ping printer IP address – In c:\program files\foresight\idea\chp directory
– Verify TIMS AE title valid • TIMS configuration dump
– Verify TIMS is authorized & validated on – Configdump utility in ..\foresight\tims directory,
creates file TIMS_Config.txt in ..\tims\CFG directory.
Printer
• Include the DICOM study from the
– Use TIMS filter files ..\foresight\tims\studies directory
– If monochrome printer, set monochrome option • TIMS log files from the ..\foresight\tims\Logs
directory
Certification Testing