Professional Documents
Culture Documents
ACB0001
ACB0001
PROGRAMME(S)
DATE OF INITIAL ACCREDITATION
1. QUALITY MANAGEMENT
02 DECEMBER 1996
SYSTEMS (QMS)
2. ENVIRONMENTAL
MANAGEMENT SYSTEMS 17 DECEMBER 2002
(EMS)
3. OCCUPATIONAL SAFETY &
HEALTH MANAGEMENT 6 DECEMBER 2005
Scan this QR Code or visit www.jsm.gov.my for the current scope of accreditation.
SYSTEMS (OSH)
4. INFORMATION SECURITY
MANAGEMENT SYSTEMS 17 FEBRUARY 2011
(ISMS)
5. FOREST MANAGEMENT
10 DECEMBER 2009
CERTIFICATION
6. MEDICAL DEVICE QUALITY
MANAGEMENT SYSTEMS 30 SEPTEMBER 2015
(MDQMS)
7. ENERGY MANAGEMENT
3 JANUARY 2014
SYSTEMS (EnMS)
8. ANTI BRIBERY MANAGEMENT
21 AUGUST 2019
SYSTEMS (ABMS)
9. BUSINESS CONTINUITY
MANAGEMENT SYSTEMS 23 MAY 2022
(BCMS)
10. FOOD SAFETY MANAGEMENT
23 DECEMBER 2008
SYSTEM (FSMS)
11. GOOD MANUFACTURING
9 OCTOBER 2015
PRACTICES FOR FOOD (GMP)
12. HACCP SYSTEMS
5 MAY 2008
13. PRODUCT CERTIFICATION (PC)
10 DECEMBER 2009
14. PEFC CHAIN OF CUSTODY
27 SEPTEMBER 2009
15. MALAYSIAN SUSTAINABLE
PALM OIL – SUPPLY CHAIN 18 JUNE 2019
CERTIFICATION (MSPO SCC)
16. MALAYSIAN SUSTAINABLE
PALM OIL CERTIFICATION 25 JULY 2017
SCHEME (MSPO)
17. CERTIFICATION OF PERSONS
9 MARCH 2017
(PERSONS)
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
code IAF ID 1
1 Agriculture, forestry and fishing
Food 3 Food products, beverages and tobacco
30 Hotels and restaurants
17 Basic metals and fabricated metal products
18 Machinery and equipment
Mechanical 19 Electrical and optical equipment
20 Shipbuilding
22 Other transport equipment
7 Limited to “Paper products”
Paper 8 Publishing companies
9 Printing companies
2 Mining and quarrying
Minerals 15 Non-metallic mineral products
16 Concrete, cement, lime, plaster, etc.
28 Construction
Construction
34 Engineering services
4 Textiles and textile products
5 Leather and leather products
Goods production 6 Wood and wood products
14 Rubber and plastic products
23 Manufacturing not elsewhere classified
7 Limited to “Pulp and paper manufacturing”
Chemicals 10 Manufacture of coke and refined petroleum products
12 Chemicals, chemical products and fibres
25 Electricity supply
Supply 26 Gas supply
27 Water supply
24 Recycling
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
code IAF ID 1
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
Technical cluster
code IAF ID 1
Agriculture,
1 Agriculture, forestry and fishing
forestry and fishing
3 Food products, beverages and tobacco
Food
30 Hotels and restaurants
17 Limited to “Fabricated metal products”
18 Machinery and equipment
Mechanical 19 Electrical and optical equipment
20 Shipbuilding
22 Other transport equipment
7 Limited to “Paper products”
Paper 8 Publishing companies
9 Printing companies
28 Construction
Construction
34 Engineering services
4 Textiles and textile products
5 Leather and leather products
Goods production
6 Wood and wood products
23 Manufacturing not elsewhere classified
7 Limited to “Pulp and paper manufacturing”
10 Manufacture of coke and refined petroleum products
12 Chemicals, chemical products and fibres
13 Pharmaceuticals
Chemicals
14 Rubber and plastic products
15 Non-metallic mineral products
16 Concrete, cement, lime, plaster, etc.
17 Limited to “Base metals production”
Mining and
2 Mining and quarrying
quarrying
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
Technical cluster
code IAF ID 1
25 Electricity supply
Supply 26 Gas supply
27 Water supply
31 Transport, storage and communication
Transport & Waste
24 Recycling
management
39 Other social services
Wholesale and retail trade; Repair of motor vehicles, motorcycles
29
and personal and household goods
32 Financial intermediation; real estate; renting
Services 33 Information technology
35 Other services
36 Public administration
37 Education
Nuclear 11 Nuclear fuel
Health 38 Health and social work
Note:
Indicates Critical Code(s) according to IAF MD 17
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
IAF code
IAF ID 1
1 Agriculture, forestry and fishing
2 Mining and quarrying
3 Food products, beverages and tobacco
9 Printing companies
10 Manufacture of coke and refined petroleum products
13 Pharmaceuticals
14 Rubber and plastic products
16 Concrete, cement, lime, plaster, etc.
17 Basic metals and fabricated metal products
19 Electrical and optical equipment
22 Other transport equipment
25 Electricity supply
27 Water supply
28 Construction
Wholesale and retail trade; Repair of motor vehicles, motorcycles
29
and personal and household goods
31 Transport, storage and communication
32 Financial intermediation; real estate; renting
33 Information technology
34 Engineering services
35 Other services
36 Public administration
37 Education
38 Health and social work
39 Other social services
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
Approved Auditors:
1. Mr. Raguraman Ramasamy
2. Mr. Mohd Mauududi Bin Muhamad Noor
3. Ms. Wan Shahima Bt Mior Ahmed Shahimi
4. Mr. Khairul Azmi Bin Pumijan
5. Mr. Mohd Shahril Bin Mohd Arshad
6. Mr. Mohd Azrul Bin Hassan
7. Ms. Meena Ragawan
8. Ms. Marliani Bt Mohd Ramli
9. Ms. Khairuza Wawiyah Bt Khairuddin
10. Ms. Nor Halida Bt Ibrahim
11. Mr. Saffridin Bin Ariffin
12. Mr. Zakaria Bin Mohamad Nor
Scan this QR Code or visit www.jsm.gov.my for the current scope of accreditation.
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
IAF code
IAF ID 1
9 Printing companies
16 Concrete, cement, lime, plaster, etc.
18 Machinery and equipment
25 Electricity supply
27 Water supply
28 Construction
33 Information technology
34 Engineering services
36 Public administration
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
code
CI Processing of perishable animal
products
Food and Feed Food C II Processing of perishable plant products
C
Processing Manufacturing C III Processing of perishable animal and
plant products (mixed products)
C IV Processing of ambient stable products
Catering E Catering
Retail, transport G Provision of GI Provision of Transport and Storage
and storage Transport and Services and Perishable Food and Feed
Storage G II Provision of Transport and Storage
Services Services for Ambient Stable Food and
Feed
Auxiliary I Production of Food Packaging and Packaging Material
services
Biochemical K Production of (Bio) Chemicals
LIST OF AUDITORS
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
LIST OF AUDITORS
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
LIST OF AUDITORS
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
Type 1b Scheme
CERTIFICATION TITLE
DOCUMENT
SCOPE NO. AND NACE CODE: 19 (26.30)
MCMC MTSFB TC Specification for Short Range Devices (SRD)
T007:2014
SKMM WTS SRD Rev. Technical Specification for Short Range Devices (SRD)
1.01:2007
SKMM WTS GSM-MT Rev. Technical Specification for GSM Mobile Terminals
1.01:2007
SKMM WTS IMT-MT Rev Technical Specification for IMT-2000 Third-Generation (3G) Cellular
1.01:2007 Mobile Terminals
MCMC MTSFB TC Specification for Land Mobile Radio Equipment
T012:2015
SKMM WTS LMR Rev. Technical Specification for Land Mobile Radio Equipment
1.01:2007
SKMM WTS BWA Rev. Technical Specification for Broadband Wireless Access (BWA)
1.01:2007 Equipment
MCMC MTSFB TC Specification for Asymmetric Digital Subscriber Line (ADSL)
T010:2014 Transceivers
SKMM FTS ADSL Rev. Asymmetric Digital Subscriber Line (ADSL) Transceivers
1.01:2007
SKMM MTSFB TC Specification for Private Automatic Branch Exchange (PABX) System for
T003:2013 Connection to Public Switched Telephone Network (PSTN)-First
Revision
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
CERTIFICATION TITLE
DOCUMENT
SKMM FTS P PABX Rev. Technical Specification for Private automatic branch exchange (PABX)
1.01:2007 system for connection to Public Switched Telephone Network (PSTN)
SKMM MTSFB TC Specification for Terminal Equipment Connecting to the Public Switched
T001:2013 Telephone Network (PSTN)-First Revision
SKMM FTS PSTN Terminal equipment connecting to the public switched telephone
Rev.1.01:2007 network (PSTN)
MCMC MTSFB TC T008 : Specification for Integrated Services Digital Network (ISDN) using basic
2014 access
SKMM FTS ISDN-BA Connecting to the integrated services digital network (ISDN) using basic
Rev.1.01:2007 access
MCMC MTSFB TC T009 : Specification for Integrated Services Digital Network (ISDN) Using
2014 Primary Rate Access
SKMM FTS ISDN-PA Technical Specification for Connecting to the Integrated Services Digital
Rev.1.01 : 2007 Network (ISDN) using primary rate access
SKMM MTSFB TC T002 : Specification for Analogue Calling Line Identity Presentation (A-Clip)
Scan this QR Code or visit www.jsm.gov.my for the current scope of accreditation.
MCMC MTSFB TC T018: Global System for Mobile Communications and Long-Term Evolution –
2021 Cellular Booster Equipment
MCMC MTSFB TC T019: IMT-2020 (Fifth Generation) – Cellular Booster Equipment
2021
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
SCOPE OF ACCREDITATION
SCHEME DESCRIPTION
Type 5 Scheme
Initial assessment:
Selection and testing of one or more samples of a product representative of the production;
One “Product Certification” license may cover many models / products that conform to those standards.
On-going:
Scheduled and unscheduled market place surveillance i.e. selection and testing of samples from the
marketplace.
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
MS 2286-2 : 2012
Polypropylene (PP) Part 2 : Pipes
Plastics Piping Systems for Hot and Cold Water Installations -
MS 1736 : Part 2 : 2004 Crosslinked Polyethylene (PE-X): Part 2: Pipes (ISO 15875-2:2002,
mod)
Plastics Piping Systems for Hot and Cold Water Installations -
MS 1736 : Part 3 : 2004 Crosslinked Polyethylene (PE-X): Part 3: Fittings (ISO 15875-3:2002,
mod)
Plastics Piping Systems for Water Supply and for Buried and above-
Ground Drainage and Sewerage under Pressure – Unplasticized
MS 628 – 2 : 2014
Poly(vinyl chloride) (PVC-U) – Part 2 : Pipes (Second Revision) (ISO
1452-2:2009, mod)
Plastics Piping Systems for Water Supply and for Buried and above-
Ground Drainage and Sewerage under Pressure – Unplasticized
MS 628 – 3: 2014
Poly(vinyl chloride) (PVC-U) – Part 2 : Fittings (First Revision) (ISO
1452-3:2009, mod)
Plastics Piping Systems for Water Supply and for Buried and above-
BS EN ISO 1452 – 3 : 2009 Ground Drainage and Sewerage Under Pressure – Unplasticized
Poly(vinyl chloride) (PVC-U) – Part 3 : Fittings (ISO 1452-3:2009)
Plastics Piping Systems for Water Supply and for Buried and above-
BS EN ISO 1452 – 3 : 2010 Ground Drainage and Sewerage Under Pressure – Unplasticized
Poly(vinyl chloride) (PVC-U)
Plastics Piping Systems for Water Supply and for Buried and above-
BS EN ISO 1452 – 2 : 2009 Ground Drainage and Sewerage Under Pressure - Unplasticized
Poly(vinyl chloride) (PVC-U) – Part 2: Pipes (ISO 1452-2:2009)
Plastics Piping Systems for Hot and Cold Water Installations -
MS ISO 15876 – 2 : 2004
Polybutylene (PB) Part 2 : Pipes (ISO 15876-2:2003, mod)
Plastics Piping Systems for Hot and Cold Water Installations -
MS ISO 15876 – 3 : 2004
Polybutylene (PB) Part 3 : Fittings (ISO 15876-3:2003, mod)
MS 1058 : Part 3 : 2006 Polyethylene (PE) Piping Systems for Water Supply – Part 3 : Fittings
BS EN 12201 - 3 : 2011 + A1 Plastics Piping Systems for Water Supply, and for Drainage and
: 2012 Sewerage under Pressure - Polyethylene (PE) – Part 3 : Fittings
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
Inside - Part 2
Plastics Piping Systems for Hot and Cold Water Installations -
MS 2508-2 : 2012 Polyethylene of Raised Temperature Resistance (PE-RT) - Part 2 :
Pipes
AS/NZS 2642-2 : 2008 Polybutylene (PB) Plumbing Pipe Systems - Part 2 : Polybutylene (PB)
Pipe for Hot and Cold Water Applications
Specification for Thermoplastic Mechanical Fittings for Plastics Pressure
SIRIM 11 : 2017
Piping Systems
Plastics Piping Systems for Hot and Cold Water Installations -
MS 2508-3 : 2012 Polyethylene of Raised Temperature Resistance (PE-RT) - Part 3 :
Fittings
Polybutylene (PB) Plumbing Pipe Systems - Mechanical Jointing Fittings
AS/NZS 2642-3 : 2008 for use with Polybutylene (PB) Pipes for Hot and Cold Water
Applications
ISO 16422 : 2014 Pipes and Joints made of Oriented Unplasticized Poly(Vinyl Chloride)
(PVC-O) for the Conveyance of Water Under Pressure - Specifications
MS 628 : Part 2 : Section 2.1 Specification for Unplasticised PVC (uPVC) Pipes for Water Supply :
: 1999 Part 2 : Joints and Fittings for use with Unplasticised PVC Pipes :
Section 2.1 : uPVC Joints and Fittings
MS 1419 : Part 1 : 2007 Acrylonitrile-Butadiene-Styrene (ABS) Piping Systems for Pressure
Applications - Part 1: Specification for Compounds, Pipes and Fittings
(First Revision)
MS 1419 – 1 : 2020 Acrylonitrile-Butadiene-Styrene (ABS) Piping Systems for Pressure
Applications – Part 1: Specification for Compounds, Pipes and Fittings
(Second Revision)
ISO 21003-2 : 2008 Multilayer Piping Systems for Hot and Cold Water Installations inside
Buildings - Part 2 : Pipes
ISO 21003-3 : 2008 Multilayer Piping Systems for Hot and Cold Water Installations inside
Buildings - Part 3 : Fittings
SIRIM 52 : 2022 Polyethylene (PE) Smooth Wall Pipes for Electrical Cable Installation -
Specification
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
: 2011
SCOPE NO. AND NACE CODE: 14 (22.29)
Onsite Sewage Treatments Units - Part 1: Pre-Fabricated Septic
MS 2441-1 : 2012
Tanks - Specification
MS 795-1 : 2011 WC Flushing Cisterns – Part 1 : Specification
MS 795-1 : 2019 Water Closet Flushing Cistern - Part 1 : Specification (Third Revision)
Plastics Piping Systems for Hot and Cold Water Installations –
MS 2286-3 : 2012
Polypropylene (PP) - Part 3 : Fittings
SS 245 : 2014 Specification for Glass Reinforced Polyester Sectional Water Tanks
ISO 10639 : 2017 Plastics Piping Systems for Pressure and Non-Pressure Water Supply -
Glass - Reinforced Thermosetting Plastics (GRP) Systems Based on
Unsaturated Polyester (UP) Resin
ISO 10467 : 2018 Plastics Piping Systems for Pressure and Non-Pressure Drainage and
Sewerage - Glass - Reinforced Thermosetting Plastics (GRP) Systems
Based on Unsaturated Polyester (UP) Resin
BS EN ISO 21003 – 2 : Multilayer Piping Systems for Hot and Cold Water Installations Inside
2008 +A1: 2011 Buildings - Part 2: Pipes
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
MS 146 : 2006 Hot rolled Steel Bars for The Reinforcement of Concrete – Specification
MS 146 : 2014 (Third Revision)
Hot rolled products of structural steels - Part 2 : Technical delivery
MS EN 10025-2 : 2011
conditions for non-alloy structural steel (Second Revision)
Hot rolled products of structural steels - Part 3 : Technical delivery
MS EN 10025-3 : 2011 conditions for normalized / normalized rolled weldable fine grain
structural steels
Hot rolled products of structural steels - Part 4: Technical delivery
MS EN 10025-4 : 2011 conditions for thermo mechanical rolled weldable fine grain structural
steels
Fixed Fire Fighting Systems – Hose Systems Part 1 : Hose Reels
MS 1447 : Part 1 : 2006
with Semi-Rigid Hose
Wrought Austenitic Stainless Steel Piping Fittings – Specification
MS 1842 : 2010
(First Revision)
ASTM A 403/A 403M-2016 Standard Specification for Wrought Austenitic Stainless Steel Piping
ASTM A 403/A 403M : 2020 Fittings
ASTM A 312/A 312-M 2014B Standard Specification for Seamless, Welded and Heavily Cold
Worked Austenitic Stainless Steel Pipes
BS EN 10248-1 : 1996 Hot Rolled Sheet Piling of Non Alloy Steels - Part 1: Technical
Delivery Conditions
JFS A 1001 : 2014 Hot Rolled Steel Sheet and Strip for Automobile Use
JIS A 5523 : 2012 Weldable Hot Rolled Steel Sheet Piles
JIS G 3101 : 2010 Rolled Steels for General Structure
JIS G 3101 : 2015 Hot Rolled Angle Bar for General Structure
JIS G 3106 : 2008 Rolled Steels for Welded Structure
JIS G 3113 : 2018 Hot-Rolled Steel Plates, Sheet and Strip for Automobile Structural
Uses
JIS G 3134 : 2006 Hot Rolled High Strength Steel Plate, Sheet and Strip with Improved
Formability for Automobile Structure Uses
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
JIS G 3507 : 1991 Carbon Steel Wire Roads for Cold Heading and Cold Forging
JIS G 3507-2 : 2005 Carbon Steels for Cold Heading
MS 2319 : 2010 Specification Wire Rods for Core Wire of Covered Electrode
MS 2682 : 2017 Hot Rolled Alloy Steel Wire Rod for Prestressed Steel – Specification
MS 2705 : 2019 Hot-Rolled Wire Rods for Pre-Stressing Steel Bar Concrete -
Specification
MS ISO 16120-2 : 2008 Non-Alloy Steel Wire Rod for Conversion to Wire - Part 2: Specific
Requirements for General Purpose Wire Rod (First Revision)
MS ISO 16120-3 : 2008 Non-Alloy Steel Wire Rod for Conversion to Wire - Part 3: Specific
Requirements for Rimmed and Rimmed Substitute Low Carbon
Steel Wire Rod (First Revision)
MS ISO 16120-4 : 2008 Non-Alloy Steel Wire Rod for Conversion to Wire - Part 4: Specific
Requirements for Wire Rod for Special Applications
SAE J 403 : 2014 Chemical Compositions of SAE Carbon Steels
BS 4449 : 2005 + A3 : Steel for the Reinforcement of Concrete - Weldable Reinforcing
2016 Steel - Bar, Coil and Decoiled Product - Specification
SS 560 : 2016 Specification for Steel for the Reinforcement of Concrete – Weldable
Reinforcing Steel – Bar, Coil and Decoiled Product
MS 2383 : 2011 Prefinished / Prepainted Sheet Metal Products for Interior / Exterior
Building Applications - Performance Requirements
MS 2383: 2020 Prefinished Flat Steel Products for Interior / Exterior Building
Applications - Performance Requirement
AS 1397 : 2011 Continuous Hot-Dipped Mettalic Coated Steel Sheet and Strip -
Coatings of Zinc and Zinc Alloyed with Aluminium and Magnesium
ISO 11950 : 1995 Cold-Reduced Electrolytic Chromium / Chromium Oxide - Coated
Steel
JIS G 3313 : 2015 Electrolytic Zinc - Coated Steel Sheet and Strip
MS 1196 : 2020 Continuous Hot-Dip Aluminium / Zinc Alloy-Coated Sheet of
Commercial, Drawing and Structural Qualities
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
MS 2025-Part 1: 2006 Cold Formed Sheet Piling of Non Alloy Steels - Part 1 : Technical
Delivery
MS 2025-Part 2: 2006 Cold Formed Sheet Piling of Non-Alloy Steels - Part 2 : Tolerances
on Shape and Dimensions
MS 2651: 2015 Cold-Reduced Carbon Steel Sheet and Strip of Commercial and
Drawing Qualities
MS 2651: 2020 Cold-Reduced Carbon Steel Sheet and Strip of Commercial and
Drawing Qualities
MS ISO 4960: 2014 Cold-Reduced Carbon Steel Strip with a Mass Fraction of Carbon
over 0.25%
SCOPE NO. AND NACE CODE: 17 (24.20)
MS 1919 : 2013 (BS EN Ductile Iron Pipes, Fittings, Accessories and Their Joints for Water
545:2010) Pipelines – Requirements and Test Methods
Pipework – Stainless Steel Fittings Threaded in Accordance with
ISO 4144 : 2003
ISO 7-1
Copper and Copper Alloys – Plumbing Fittings – Part 3 : Fittings
BS EN 1254 – 3 : 1998
with Compression Ends for use with Plastics Pipes
Non-Alloy Steel Tubes and Fittings for the Conveyance of Aqueous
MS 1968 : 2007 (Confirmed
Liquids including Water for Human Consumption-Technical Delivery
2011)
Conditions
ISO 6594 : 2006 Cast Iron Drainage Pipes and Fittings - Spigot Series
JKR 20200 – 0045 - 99 Standard Specification for Detachable Joints and Variable Adaptors
for uPVC, Ductile Iron and AC Pipes
JKR 20200 – 0048 - 99 Standard Specification for Flexible Coupling and Flange Adaptors
JKR 20200 – 0100 - 01 Standard Specification for Ductile Iron Strainers (DN 50 to DN 600)
JKR 20200 – 0042 - 99 Standard Specification for Ductile Iron Pillar Hydrants
MS 1988 : 2007 Welded Stainless Steel Tubes for the Conveyance of Water and
Other Aqueous Liquids
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
ASTM F1476 – 07 (2013) Specification for Performance of Gasketed Mechanical Couplings for
Use in Piping Applications
SCOPE NO. AND NACE CODE: 17 (24.44)
BS EN 1057:2006 Copper and Copper Alloys - Seamless, Round
BS EN 1057 : 2006 + A1 :
Copper Tubes for Water and Gas in Sanitary and Heating
2010
Applications (+A1:2010)
SPAN TS 3010 : 2022 Copper Alloy Threaded Fittings for Water Industry
SCOPE NO. AND NACE CODE: 17 (24.51)
Gully Tops and Manhole Tops for Vehicular and Pedestrian Areas -
BS EN 124 -2 : 2015
Part 2 : Gully Tops and Manhole Tops Made of Cast Iron
SPAN TS 3003: 2021 Manhole Tops - Specification
SCOPE NO. AND NACE CODE: 17 (25.29)
BS 1564 : 1975 Specification for Pressed Steel Sectional Rectangular Tanks
ANSI / AWWA D 103-09 Factory - Coated Bolted Carbon Steel Tanks for Water Storage
ISO 28765 : 2016 Vitreous and Porcelain Enamels – Design of Bolted Steel Tanks for
the Storage or Treatment of Water or Municipal or Industrial
Effluents and Sludges
CNS 9443 : 2000 Stainless Steel Water Tank
JKR 20200 – 0041 - 99 Standard Specification for Stainless Steel Water Tanks (with
effective capacity up to 15,000 litres)
SCOPE NO. AND NACE CODE: 17 (25.93)
MS 145 : 2006 Specification for Steel Welded Fabric for the Reinforcement of Concrete
MS 145 : 2014 Steel Fabric for the Reinforcement of Concrete – Specification (Fourth
Revision)
SCOPE NO. AND NACE CODE: 17 (25.99)
MS 1799 : 2008 (Amd. 1 :
2010) Urinals - Specification
MS 1799 : 2020
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
SPAN TS 3005: 2021 Shower Outlet for Sanitary Tapware for Water Supply System -
Specification
SPAN TS 3012 : 2022 Sanitary Tapware – Delay Action or self-Closing valve PN 10
BS EN 16767: 2020 Industrial valves – Metallic check valves
SCOPE NO. AND NACE CODE: 18 (28.24)
MS IEC 60745-1 : 2005
Hand-held motor operated electric tools - Safety Part 1 General
MS IEC 60745-1 : 2010
Requirements
(IEC 60745-1:2001)
MS IEC 60745-2-1 : 2005 Hand-held motor operated electric tools - Safety Part 2-1 Particular
(IEC 60745-2 -1: 2003) Requirements for Drills and Impact Drills
MS IEC 60745-2-3 : 2010 Hand-Held Motor-operated electric tools - Safety - Part 2-3
Particular Requirements for Grinders, Polishers and Disk-Type
Sanders (First Revision)
MS IEC 60745-2-4 : 2005 Hand-held motor operated electric tools - Safety Part 2-4 Particular
(IEC 60745-2-4: 2002) Requirements for Sanders and Polishers other than Disk Type
SCOPE NO. AND NACE CODE: 19 (26.20)
MS IEC 60950-1 : 2007 Information technology equipment
(IEC 60950-1 : 2005)
SCOPE NO. AND NACE CODE: 19 (26.51)
ISO 4064 – 1 : 2014 Water Meters for Cold Potable Water and Hot Water - Part 1 :
Metrological and Technical Requirements
ISO 4064 – 4 : 2014 Water Meters for Cold Potable Water and Hot Water - Part 4 : Non-
Metrological Requirements not covered in ISO 4064-1
SCOPE NO. AND NACE CODE: 19 (27.11)
MS IEC 61347-2-3 : 2003 Lamp controlgear Part 2-3 : Particular requirements for A.C.
(IEC 61347-2-3 : 2000) supplied electronic ballasts for fluorescent lamps
MS IEC 60929 : 1995 Lamp controlgear A.C. supplied electronic ballasts for fluorescent
(IEC 60929 : 1990) lamps - Performance requirements
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
MS IEC 60335-2-9 : 2006 Household and similar electrical appliances - Safety - Part 2-9:
(IEC 60335-2-9 : 2006) Particular requirements for grills, toasters and similar portable cooking
appliances
MS IEC 60335-2-13 : 2006 Household and similar electrical appliances -Safety - Part 2-13:
(IEC 60335-2-13 : 2004) Particular requirements for deep fat fryers, frying pans and similar
appliances
MS IEC 60335-2-14 : 2003 Household and similar electrical appliances -Safety - Part 2-14:
(IEC 60335-2-14 : 2002) Particular requirements for kitchen machines
MS IEC 60335-2-15 : 2004 Household and similar electrical appliances - Safety - Part 2-15:
(IEC 60335-2-15 : 2002) Particular requirements for appliances for heating liquids
MS IEC 60335-2-21 : 2005 Household and similar electrical appliances - Safety - Part 2-21:
(IEC 60335-2-21 : 2001 + A1 Particular requirements for storage water heaters
: 2004)
MS IEC 60335-2-23 : 2003 Household and similar electrical appliances -Safety - Part 2-23:
Particular requirements for appliances for skin or hair care
MS IEC 60335-2-23 : 2006
(IEC 60335-2-23 : 2003
IEC 60335-2-23 : 2005)
MS IEC 60335-2-24 : 2002 Household and similar electrical appliances -Safety - Part 2-24:
(IEC 60335-2-24 : 2002) Particular requirements for refrigerating appliances, ice-cream
appliances and ice-makers
MS IEC 60335-2-29 : 2005 Household and similar electrical appliances -Safety - Part 2-29:
(IEC 60335-2-29 : 2002 + A1 Particular requirements for battery chargers
: 2004)
MS 1597-2-24 : 2005 Safety of household and similar electrical appliances – Part 2-24:
(IEC 60335-2-24 : 2005 with Particular requirements for refrigerating appliances, ice-cream
modification) appliances and ice-makers
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
BS EN 16139 : 2013 Furniture - Strength, Durability and Safety - Requirements for Non-
Domestic Seating
BS EN 15372 : 2016 Furniture - Strength, Durability and Safety - Requirements for Non-
Domestic Tables
BS EN 1335-2 : 2018 Office Furniture : Office Work Chair : Safety Requirements
BS EN 14073-2 : 2004 Office Furniture - Storage Furniture - Part 2 : Safety Requirements
BS EN 527-2 : 2016 +A1 : Office Furniture - Work Tables : Part 2 Safety, Strength and Durability
2019 Requirements
BS EN 1023-2 : 2000 Office Furniture - Screens - Part 2 : Mechanical Safety Requirements
SCOPE NO. AND NACE CODE: 23 (32.99)
MS 183 : 2001 Specification for Industrial Safety Helmet (First Revision)
ANSI / ISEA Z 89.1 : 2014 Standard for Industrial Head Protection
BS EN 397 : 2012+A1 : 2012 Industrial Safety Helmets
MS 2050 : 2007 Personal Eye-Protection - Specifications (First Revision)
MS 1953 : 2007 Personal Protection - Equipment for Eye and Face Protection during
Welding and Allied Processes
MS ISO 6161 : 2003 Personal Eye-Protectors - Filters and Eye-Protectors against Laser
Radiation
ISO 6161 : 1981 Personal Eye-Protectors - Filters and Eye-Protectors against Laser
Radiation
BS EN 166 : 2002 Personal Eye-Protection - Specifications
BS EN 175 : 1997 Personal Protection - Equipment for Eye and Face Protection during
Welding and Allied Processes
ANSI / ISEA Z 87.1 : 2010 Standard for Occupational and Educational Personal Eye and Face
Protection Devices
BS EN 352-1 : 2002 Hearing Protectors - General Requirements - Part 1 : Ear-Muffs
BS EN 352-2 : 2002 Hearing Protectors - General Requirements - Part 2 : Ear-Plugs
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
Organisms Risks
BS EN 511 : 2006 Protective Gloves against Cold
BS EN 421 : 2010 Protective Gloves against Ionizing Radiation and Radioactive
Contamination
BS EN 60903 : 2003 Gloves of Insulating Material
NFPA 2112 : 2018 Standard on Flame-Resistant Clothing for Protection of Industrial
Personnel against Short-Duration Thermal Exposures from Fire
BS EN 14605 : 2005 +A1 Protective Clothing against Liquid Chemicals - Performance
: 2009 Requirements for Clothing with Liquid-Tight (Type 3) or Spray-Tight
(Type 4) Connections, including Items Providing Protection to Parts of
the Body only (types pb [3] and pb [4])
BS EN ISO 11612 : 2015 Protective Clothing – Clothing to Protect against Heat and Flame –
Minimum Performance Requirement (ISO 11612:2015)
MS 1731 : 2004 High-Visibility Warning Cloth
MS ISO 11612 : 2005 Clothing for Protection against Heat and Flame - Test Methods and
Performance Requirements for Heat Protective Clothing
MS ISO 13688 : 2004 Protective Clothing - General Requirements
MS ISO 14877 : 2005 Protective Clothing for Abrasive Blasting Operations using Granular
Abrasives
ISO 13688 : 2013 Protective Clothing - General Requirements
ISO 14877 : 2002 Protective Clothing for Abrasive Blasting Operations using Granular
Abrasives
ISO 11612 : 2015 Protective Clothing – Clothing to Protect against Heat and Flame –
Minimum Performance Requirements
BS EN ISO 13982-1 : 2004+ Protective Clothing for use against Solid Particulates - Part 1:
A1 : 2010 Performance Requirements for Chemical Protective Clothing Providing
Protection to the Full Body against Airborne Solid Particulars (Type 5
Clothing)
BS EN 13795-1 : 2019 Surgical Clothing and Drapes - Requirements and Test Methods Part 1 :
Surgical Drapes and Gown
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
BS EN 360 : 2002 Personal Protective Equipment against Falls from a Height. Retractable
type Fall Arresters
BS EN 354 : 2002 Personal Protective Equipment against Falls from a Height. Lanyards
BS EN 354 : 2010 Personal Fall Protection Equipment. Lanyards
BS EN 362 : 2004 Personal Protective Equipment against Falls from a Height. Connectors
BS EN 353-2 : 2002 Personal Protective Equipment against Falls from a Height. Guided
Type Fall Arresters including a Flexible Anchor Line
MS 2308 : 2010 Personal Protective Equipment against Falls from a Height. Lanyards
MS 2311 : 2010 Personal Protective Equipment against Falls from a Height. Full Body
Harnesses
MS 2312 : 2010 Personal Protective Equipment against Falls from a Height - Connectors
MS 2309 : 2010 Personal Protective Equipment against Falls from a Height - Energy
Absorbers
MS 2310 : 2010 Personal Protective Equipment against Falls from a Height - Retractable
Type Fall Arresters
MS 2307-1 : 2010 Personal Protective Equipment against Falls from a Height - Part 1 :
Guided Type Fall Arresters including a Rigid Anchor Line
SIRIM 40 : 2020 Non-Medical Face Masks - Specification
CWA 17553 : 2020 Community Face Coverings – Guide to Minimum Requirements,
Methods of Testing and Use
SCOPE NO. AND NACE CODE: 27 (36.00)
Specification for Corrugated Steel Panel Tanks with Liner for Water
SIRIM 18 : 2017
Storage
SCOPE NO. AND NACE CODE: 28 (43.99)
Playground Equipment - Safety Performance for Public Use -
MS 966 : 2017
Specification
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
SCOPE OF ACCREDITATION
Scan this QR Code or visit www.jsm.gov.my for the current scope of accreditation.
SCHEME DESCRIPTION
Type 6 Scheme
IECEx 03-4 : IECEx Certified Service Facilities Scheme – Part 4: Ex inspection and maintenance
IECEx 03-5: IECEx Certified Service Facilities Scheme – Part 5: Repair, overhaul and reclamation of Ex
equipment
Conformity of the processes or activities to the IECEx certified service facilities scheme is based on the
following:
Initial Assessment:
Assessment of the implementation of IECEx certified service facilities scheme in terms of management
system requirements, IECEx rules of procedure requirements and IECEx operational documents
requirements.
Assessment of the implementation of IECEx certified service facilities scheme in terms of management
system requirements, IECEx rules of procedure requirements and IECEx operational documents
requirements.
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
Type 6 Scheme
Conformity of the processes or activities to PEFC Council Technical Document, PEFC ST 2002:2020 is
assured by the following:-
Initial Assessment:
Documentation assessment of the standard operating procedures of the chain of custody system.
Assessment on the implementation of the chain of custody system in terms of procedures and records
on the transportation (which may include records at forest gate or checking station), purchasing and
processing (includes physical separation from certified raw material and non certified raw material,
traceability, production plan), packaging and labeling, sales and records keeping.
Assessment on the implementation of the chain of custody system in terms of procedures and records
on the transportation (which may include records at forest gate or checking station), purchasing and
processing (includes physical separation from certified raw material and non certified raw material,
traceability, production plan), packaging and labeling, sales and records keeping.
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
SCHEME DESCRIPTION
Type 6 Scheme
Conformity of the processes or activities to Malaysian Sustainable Palm Oil (MSPO) Supply Chain
Certification Standard is assured by the following: -
Initial Assessment:
Documentation assessment of the standard operating procedures of the chain of custody system which
covers management requirements and traceability of the production throughout the supply chain from raw
materials to processing and manufacturing of palm oil and palm oil-based products.
Assessment on the implementation of the chain of custody system in terms of management requirements,
traceability of the production, procedures and logistic records (which may include records provided by
transporter, at the weighing bridge), purchasing and processing (includes physical separation from
certified raw material and non certified raw material, traceability, production book keeping), packaging and
labeling, product claim, sales and records keeping. (activities during initial assessment for SCCS).
Assessment on the implementation of the chain of custody system in terms of management requirements,
traceability of the production, procedures and logistic records (which may include records provided by
transporter, at the weighing bridge), purchasing and processing (includes physical separation from
certified raw material and non certified raw material, traceability, production book keeping), packaging and
labeling, product claim, sales and records keeping. (activities during ongoing assessment for SCCS).
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
SCOPE OF ACCREDITATION
Oil Palm Plantations and MS 2530-3:2013 – General principles for oil palm plantations and
Organised Smallholders organized smallholders
Palm Oil Mills MS 2530-4:2013 – General principles for palm oil mills
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia
Schedule
Issue date: 19 January 2024
Valid until: 16 February 2025
SCOPE OF ACCREDITATION
Basic knowledge and awareness to enter a site that includes a
Unit Ex 000
Scan this QR Code or visit www.jsm.gov.my for the current scope of accreditation.
The Scheme for the Accreditation of Certification Bodies (The ACB Scheme)
Department of Standards Malaysia