Professional Documents
Culture Documents
DEPARTMENT
DEFECT SHEET
Aircraft Type: CRJ-200 Work Order No.: ERROR2
Aircraft Registration: 6O-PAA
Date Completed.: Hrs: Serial No: 7126
Check: OPENED IN ERROR Cycles:
1 000−26−900−750-AFT
Hydrostatic test of the extinguisher,
water fire cabin
AFT PN : 892480
2 000−26−900−750-CPT
Hydrostatic test of the portable fire
extinguisher, cockpit PN: BA51015-
5.
3 000−26−900−750-FWD
Hydrostatic test of the portable fire
extinguisher, cabin
FWD PN : BA22594GR-3.
Assembly
Page 1 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
EFFECTIVITY:
Pre Modsum TC601R15984 or Pre
SB 601R-34-137 or Pre SB 601R-34-
139
Support-Structure
Page 2 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Bracket
FS235.0
on Fuselage
Page 3 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Page 4 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Fittings on Fuselage
Fittings on Fuselage
Page 5 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Page 6 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Page 7 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
EFFECTIVITY:
P/N 601R13000
EFFECTIVITY:
P/N 601R13000-1
Page 8 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
EFFECTIVITY:
P/N 601R13000
EFFECTIVITY:
P/N 601R13000-2
Page 9 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
129 000-57-900-521 Detailed Inspection of the Left Wing Performed Detailed Inspection of the
Lower Wing Plank Access Holes Left Wing Lower Wing Plank Access
from BL0.0 to WS314.50 Holes from BL0.0 to WS314.50 and
found to be satisfactoery IAW Task 000-
57-900-521
130 000-57-900-522 Detailed Inspection of the Right Detailed Inspection of the Right Wing
Wing Lower Wing Plank Access Lower Wing Plank Access Holes from
Holes from BL0.0 to WS314.50 BL0.0 to WS314.50 carried out. Wing
tank nterior found to be satisfactory and
there were no cracks, corrosion, dents,
gouges or scratches
Page 10 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Page 11 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Page 12 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Page 13 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
Page 14 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
(ADG)
176 Carry out Task 000-24-900-142 - - Detailed Inspection of the Center Tank
Detailed Inspection of the Center Wiring Harness Clipping Along the Front
Tank Wiring Harness Clipping and Rear Spar carried out and found to
Along the Front and Rear Spar be satisfactory.
Page 15 of 16
No Task No Defect Rectification Task Mech/Tech Authorization Date
The undersigned "certifies that the work specified was carried out in accordance with the current regulations and in
respect of that work, the aircraft or aircraft component is considered ready for release to service"
Page 16 of 16