Professional Documents
Culture Documents
Applications
Reactor Switching Capacitor Switching
(Reactive Power Compensation)
Transformer Switching
Motor Switching (Soft Starter, Liquid Rotor Starters,
Resistance Switching (Neutral Grounding of
Pumping Stations, FLP/NFLP Cranes FWD-REV in
Generators, Heaters, Ventilation System, Melting
Mines, Lift Hoists)
Furnace)
Features & Types
Salient Features
Low Voltage Vacuum Contactor and Medium Voltage Vacuum inductive switching over voltages
Contactor Comes with smart & ready to use Voltage Control Card – Less
Wide range - Rated Voltage 415V-12kV, Rated Current upto 1000A, control wiring & improved Customer Convenience
STC upto 10kA for 1Sec., AC-4 Duty Compliant Very high reliability due to minimum no. of dynamic components in
VC with higher BIL i.e. PFHV-38kVrms & Impulse-95kVp available VC Mechanism
for high altitude requirements High mechanical and electrical life & Low maintenance
Flexibility to configure VC in case of change in control voltage even Rugged structure for higher reliability in harsh dusty-corrosive
at site without changing control coils atmosphere
Option for selecting No. of Poles i.e. 1/2/3 & Latching Mode i.e. In-House R&D enables continuous improvement & development of
Electrical / Mechanical, for specific applications like Neutral VC
Grounding, Soft Starters etc. Fully Type Tested
Epoxy Encapsulated VI Pole enables Higher Insulation & makes VC Certified with latest QMS (ISO 9001-2008), EMS (ISO 14001-
Compact & Cost effective to integrate 2004) & OHSAS (BS 18001-2007)
Low chopping current – No requirement of surge suppressor for VCs compliant to latest IEC: 60947 & IEC 62271-106
Mechanism
Ordering Information – 1. Rated Voltage, Rated Current, STC
Assembly
Rating, 2. Control Voltage, 3. Application Details (Inside
Enclosure)
DETAILS SUB-DETAILS
Note:
1. VCs are suitable for INDOOR application only 4. MVVC Closing Coils are NOT suitable for continuous Rated control Voltage
2. Use of separate phase barriers for 3-Pole MVVC is must 5. VC Aux Contacts are NOT suitable for DC breaking. Hence DO NOT use for coil
3. MVVC Coils are suitable for DC control supply only. Bridge Rectifier or VCC is current breaking
required for AC control supply at site 6. Dimensions above are indicative. Specific GAD to be referred before engineering
About CG Vacuum Contactors Vacuum Contactor Technology
With the increase in regular faults & complicacies in using conventional A “Vacuum Contactor” is a “Switching device” that “makes and breaks”
contactors, reliability for Load Control & Switching System became an area the electrical current inside a chamber called “Vacuum Interrupter Tube”
of concern. To avoid these issues with conventional contactors, Vacuum (VI).
technology is becoming an increasingly viable alternative for reducing A Vacuum Interrupter is a sealed-off device with a level of vacuum
downtime. >10-5 torr.
In alignment with CG’s legacy to build market leadership through SMART During breaking arc is established between fixed & moving contacts of
Solutions, CG-Aurangabad developed pioneering concept of Vacuum VI. At current zero the arc ceases & the circuit voltage is isolated
Contactors (VC) with Epoxy Encapsulated Vacuum Interrupters (VI). internally by rapidly improved dielectric strength between fixed & moving
CG is a market leader in Vacuum Interrupter Technology in India and a major contacts.
global player. VI is the ‘heart’ of VC and use of own make vacuum interrupters The special contact material used in the VI, ensure low chopping current
in VC gives CG an added advantage. & switching over voltage, thus enhances the life of connected load. Viz.
CG commenced manufacturing of Vacuum Contactors in the year 2001-02 Motors, Transformers, Capacitors etc.
at Aurangabad. Since then over 20,000 CG make VCs ranging from 415V
to 12kV are in service & providing reliable, safe and maintenance free
Switching Solution to various Industries & Utilities within & outside India.
FIXED ELECTRODE
METALISED CERAMIC
ARC SHIELD
ELECTRICAL CONTACTS
RETAINER SHIELD
CONTACT RETAINER
MOVING ELECTRODE