PROJECT / TASK: Operation Of Batching Plant CONTRACTOR: JOB No.:
SUPERVISOR: LOCATION: DATE:
JOB STEP HAZARDS Control Measure ACTION
Break the job into steps. List the hazard or type of harm List the necessary control measures to be followed to A person who will Listing work which may be hazardous. identified with each step eliminate the identified hazards ensure this happens
Electrocution Entry to be restricted inside the batching plant operator
room other than the operator and the electrician Only authorised operator to be operated the same. Proper earthing to be given and all the connections are to be provided through ELCB only. An electrician has to use rubber hand gloves(Tested and Trademark ) while doing local test and all. Identification boards to be displayed.
All the machinery to be checked and certified by putting
Moving Parts/Trip Hazard a green sticker All the moving parts to be guarded and no loose clothing allowed near the machinery/conveyors. Unauthorised entry to be restricted.
Fire Hazard CO2 fire extinguisher to be provided.
Batching Plant Operation Nose mask to be provided to those who are engaged in (Commissioning) Dust Hazard cement loading work.
Safety goggles to be provided other than PPE’S for all
Eye Hazard those who are engaged in the work.
Documents of the mobile plants/vehicle to be checked
Mobile Plants/Hit Hazard and cleared ‘OK’ before entering the site. A valid licence for the operator. Cement Loading Proper access to be provided by clearing all unwanted materials or traffic to enter the workplace. Movement area of the machine to be isolated. Daily check for the equipment and the checklist to be fulfilled daily. Shifting of material using Loader Continuous supervision to be provided.
Vehicle to be inspected and valid document to be
checked. A valid licence for the vehicle driver. Mobile plant/Hit Hazard Daily check for the vehicle and checklist to be fulfilled. Placing of transit mixer Access to be cleared from all unwanted materials and traffic for vehicle movement.