Professional Documents
Culture Documents
Inspection Report
F-084/09
This is to notify that the components as described hereunder have been inspected:
Page 1 of 5
Document Code
Inspection Report
F-084/09
Inspection Details:
As per client’s request and coordinating with vendor and in his factory , test was performed as below :
- According to the IGS-M-IN-302(2) standard, the hydrostatic test of 2 safety relief valves was performed at a
pressure of 150 bar and in a time of 5 minutes. No leakage or pressure drop was observed during the test.
- The increase and decrease of pressure was done gradually.
- Calibration certificates of used measuring instrument were controlled .
Page 2 of 5
Document Code
Inspection Report
F-084/09
Page 3 of 5
Document Code
Inspection Report
F-084/09
Page 4 of 5
Document Code
Inspection Report
F-084/09
10. Conclusion:
There Were no Reason for Objection
Result of Inspection: With Comment, Refer to Underlined Content
With Objection, Refer to Underlined Content
Completed
Not Complete
Status of Items (According to P.O.)
Ready for Packing
Ready for Shipment
Further Inspections: Yes No
M.O.M
Certificate(s)
The Documents Which Shall Be Attached to This Report Drawing(s)
Based on Scope of Inspection: Packing List
NCR
Other:
Name of Inspector: M.R Vakili Signature and Stamp:
Date: 13.Nov.2023
Page 5 of 5