Professional Documents
Culture Documents
Hyd Pressure Spec A60H
Hyd Pressure Spec A60H
For position and use of pressure check connections, see Brake system, component location and Pressure check
connections, description
All stated pressures apply at a hydraulic oil temperature of 20– 40°.
Hydraulic system, pressures
Dump function
Dumping position 0.01 – 0.06 0.1 – 0.6 1.5 – 8.70 M4
0.8 – 2.0 8.0 – 20 116 – 299 M5
Lowering position with hold function 1.4 – 2.3 14 – 23 203 – 334 M4
0.01 – 0.06 0.1 – 0.6 1.5 – 8.70 M5
Dump lever in warm-up position 2.30 – 2.63 23.0 – 26.3 334 – 381 M4
0.01 – 0.06 0.1 – 0.6 1.5 – 8.70 M5
Hold position 0 – 0.03 0 – 0.3 0 – 4.35 M4
0 – 0.03 0 – 0.3 0 – 4.35 M5
Floating position 0.9 9 130 M4
0.01 0.1 1.5 M5
R35
Servo pressure, dump function 3.5 ±0.35 35 ±3.5 508 ±51 M6
Steering pressure
Left 28.0 ± 0.4 280 ± 4 4061 ± 58 M7
Anti-cavitation pressure (MTRV1) 1.8 ± 0.3 18 ±3 261 ±44 (plugged)
Steering pressure
Right 28.0 ± 0.4 280 ± 4 4061 ± 58 M8
Anti-cavitation pressure (MTRV1) 1.8 ± 0.3 18 ±3 261 ±44 (plugged)
CHV1–CHV2
Shock valve, steering system 31 310 4496
CHV3
Pressure limiting port B1– Warm-up 3.8 38 551
position, (idle)
MTRV1
Anti-cavitation pressure, steering 1.8 ± 0.3 18 ±3 260 ±44
system
MTRV2
Anti-cavitation pressure, dumping 0.3 3 44
system
Brake/cooling fan pump, max. 25.5 ±0.5 255 ±5 3698 ±73 AM1/M21
pressure (mechanical setting on
pump)
Brake charging, activation 19.5 195 2828 AM1
(SE5226)
Max. deployed brake pressure, front 14.1 ± 0.7 141 ± 7 2045 ± 102 M15
(SE5203)
Max. deployed brake pressure, rear 13.8 ± 0.6 138 ± 6 2002 ± 87 M16
Min. accumulator pressure after two
brake applications
Front circuit 19.5 195 2828 M21
(SE5203)
Rear circuit 18.5 185 2683 M22
Precharge pressure accumulator, 10 100 1450
new
Precharge pressure accumulator, 8.5 85 1233
min.
Warning, low pressure accumulator <14.5 <145 <2103 M21/M22
(SE5201/SE5202)
Warning, high pressure accumulator >27.5 >275 >3990 M21/M22
(SE5201/SE5202)
Parking brake, emergency <14.0 <140 <2030 M21/M22
application
(SE5201/SE5202)
NOTE!
Both front and rear circuit shall be
below the limit value
Deployed brake pressure, load & 6.5 ±1 65 ±10 914 ±145 M15/M16
dump brake
(SE5203)
HS-system, pressure
Precharge pressure
Accumulator, tractor unit 4.5 ± 0.1 45 ± 1 653 ± 14.5 Measured on
Gas: Nitrogen (N2) accumulator