Professional Documents
Culture Documents
CONCENCRETE BY USING
COW DUNG ASH
SONA SUWAL
18036020
M.Tech (Structures)
OBJECTIVE
• To investigate the compressive strength of concrete with cow dung
ash .
11/04/20 2
TABLE OF CONTENT
1. Introduction
2. Scope of the study
3. Materials used for analysis
4. Methodology
5. Results
6. Conclusions
7. References
11/04/20 3
INTRODUCTION
• Cement, main binder for production of concrete, mortar, sand crete
blocks.
11/04/20 5
MATERIALS USED IN ANALYSIS
1.Cement
• Ordinary port land cement 53 grade used.
2.Fine aggregate
• Fine aggregates which can pass through 4.75mm IS sieve were used.
3.Coarse aggregate
• Crushed store aggregate of 20mm size was used.
4.Water
•
11/04/20
Water should be clean and free from oil, alkali,acid 6
MATERIALS USED IN ANALYSIS
5. Super plasticizer
• To impart additional workability a super plasticizer
CERAPLAST 300 was used.
7. Glass fiber
• Glass fiber with modulus of elasticity 74gpa.
11/04/20 7
PICTURES OF COWDUNG ASH AND
FIBRES
11/04/20 8
METHODOLOGY
• Specific gravity of cement, fine aggregate and coarse aggregate are
tested.
• The curing was allowed until the date of testing for 7th ,14th, 28th days.
11/04/20 10
PICTURES ON TESTS PERFORMED
11/04/20 11
RESULTS
11/04/20 12
11/04/20 13
11/04/20 14
CONCLUSIONS
• The replacement of cement with cow dung ash 6% and 8% leads to
increase in compressive strength.
11/04/20 15
REFERENCES
1. Deshmukh S.H, Bhusari, “Effect of glass on ordinary portland
cement concrete,” IOSR Journal Of Engineering, June 2012.
2. Jitender Kumar Dhaka, Surendra Roy, “Utilization of fly ash and
cow dung ash as partial replacement of cement in
concrete.”International Journal Of Civil And Structural Engineering
volume 6, 2015.
3. V.S.R.P.K. and Raju.P.P “Incorporation of cow dung ash to mortar
and concrete”. International journal of engineering ressearchand
applications, vol.2pp.580-585,2012.
11/04/20 16
11/04/20 17