This document provides the results of testing performed on plastic pipes as per ASTM D standards. It includes 11 clauses testing various requirements such as outer diameter, wall thickness, length, appearance, vicat softening temperature, burst pressure, flattening test, tensile strength, and blow test resistance. All test results were found to meet the specified requirements. Additionally, it lists the sizes and dimensions of various plastic fittings including brass and plastic rings, fittings, unions, and end plugs.
This document provides the results of testing performed on plastic pipes as per ASTM D standards. It includes 11 clauses testing various requirements such as outer diameter, wall thickness, length, appearance, vicat softening temperature, burst pressure, flattening test, tensile strength, and blow test resistance. All test results were found to meet the specified requirements. Additionally, it lists the sizes and dimensions of various plastic fittings including brass and plastic rings, fittings, unions, and end plugs.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document provides the results of testing performed on plastic pipes as per ASTM D standards. It includes 11 clauses testing various requirements such as outer diameter, wall thickness, length, appearance, vicat softening temperature, burst pressure, flattening test, tensile strength, and blow test resistance. All test results were found to meet the specified requirements. Additionally, it lists the sizes and dimensions of various plastic fittings including brass and plastic rings, fittings, unions, and end plugs.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
AS PER ASTM D SIZE OF PIPE BRAND NAME : DATE: BATCH NO SDR : QTY: Clause no Requirement Frequancey No of sample Specification Observation Remarks Required Dimension (mm ) 1 Mean out side diameter Each control unit 10
2 Wall thickness Each control unit 10
3 Effective Length Each control unit 10 3 mtr
4 Pipe end Each control unit 10 Satisfactory
5 Visual Appearance Each control unit 10 Satisfactory
7 3 6 Vicat Softening Temp Each control unit 1 >110 0C
Pipe shall Not Fail
7 Brust Pres.at82 ºC for 6 minut Each control unit During the Prescribed Duration Pipe shall Not Fail 8 Sustained Pres.at 82 ºC for 4 Hr Each control unit 1 During the Prescribed Duration
Pipe Shall Show No
9 Flatening Test Each control unit 1 Signs off Cracking Spliting & Breaking
10 Tensile Strength At 27± 2 0C Each control unit 1 > 50 Mpa
11 Resistance to External Blow at 27ºC Each control unit 10 < 10%
Quality Inspector Quality Incharge
ITEM NAME SIZE RUBBER O RING SIZE BRASS RING ½'' 16X2 BRASS RING 1'' 16 X 2.5 BRASS MTA ½'' 10 X 2.5 BRASS FTA ½'' 10 X 2.5 BRASS MTA ¾'' 12 X 2.5 BRASS FTA ¾'' 12 X 2.5 BRASS MTA 1'' 14 X 3 BRASS FTA 1'' 14 X 3 BRASS MTA 1¼'' 22 X 3.5 BRASS FTA 1¼'' 22 X 3.5 BRASS MTA 1½'' 32 X 3.5 BRASS FTA 1½'' 32 X 3.5 BRASS MTA 2'' 32 X 3.5 BRASS FTA 2'' 32 X 3.5
FTA ( PLASTIC ) ½'' 18.65 X 14.5 X 3
FTA ( PLASTIC ) ¾'' 24 X 18.6 X 3.5 FTA ( PLASTIC ) 1'' 30.7 X 23.7 X 3.5 FTA ( PLASTIC ) 1¼'' 31.5 X 39 X 4 FTA ( PLASTIC ) 1½'' 36.5 X 45 X 4 FTA ( PLASTIC ) 2'' 46 X 56.8 X 4
TANK NIPPLE ( PLASTIC ) 1'' 50.1 X 32.1 X 3
UNION ( PLASTIC ) ½'' 17 X 3.5
UNION ( PLASTIC ) ¾'' 29.5 X 22.7 X 3.5 UNION ( PLASTIC ) 1'' 37.8 X 30.9 X 3.5 UNION ( PLASTIC ) 1¼'' 43.7 X 36.6 X 3.8 UNION ( PLASTIC ) 1½'' 52 X 45.5 X 5.3 UNION ( PLASTIC ) 2'' 56 X 5.2