Professional Documents
Culture Documents
PAGE 1 of 2
Location
Area
: SUBAN
Permit No.
: Drawing Attach
SPECIFICATION OF LOAD
LIFTING WEIGHTS
Items
CONTAINER 40"
CENTER OF GRAVITY
(for awkward load only)
Weight in kg
4,000.00
TOTAL
4,000.00
Lifting Equipment & Accessories To Be Used (specify type, SWL) and manpower required
No
SWL (Te)
Quantity
Type of equipment
13
SHACKLE
8.5
RIGGING SUPERVISOR
TAG LINE
RIGGER
CRANE OPERATOR
Category of lifts:
Simple
Complicated
Number
Complex
Applicable?
(Yes / No)
HAZARDS IDENTIFIED :
CONTROL PLAN :
- Ensure valid certificate, valid color code, SWL plate and identification number of
lifting gear
- Uncertified Rigger
- Lack Communication
- Perform PJSM to all crew rigger and ensure the all crew understand the job
steps
Assessment performed by :
Name :
Position :
Date:
PAGE 2 of 2
Location
Area
: SUBAN
Permit No.
: Drawing Attach
Ensure lifting and rigging equipments are certified for current use and in good working order through pre-use inspections.
Ensure that crane equipments are certified for current use and in a good condition
Ensure the radius of boom crane is safe when lifting operation worked
Positioning the crane it's about 7 meters from target location with boom radius 77 (13.9 Tons)
Ready for lifting from trailler to the location installation it's about 6 meters with boom radius 79 (13.9 Tons)
ON COMPLETION OF WORK
Radio
Verbal
Steps Taken To Eliminate Danger To Personnel Involved & Others, Including Barriers Where Appropriate:
Barrier off area to all personnel not involved with the lifting operation
A suitable risk assessment to be completed before job start.
Toolbox talk to be held prior to job start and and at any point where task deviates from procedure.
De-brief and learning points:
Planned By:
Signature:
Date:
Reviewed By:
Signature:
Date:
Hand signals