Professional Documents
Culture Documents
2. What is ESPM?
A. Electrical Standard Practices Manual
B. Electrical Supplemental Procedure Manual
C. Electrical Supplemental Practices Manual
4. Route 1M is meaning:
A. Not safety route
B. Sensitive route
C. EFCS route
14. A wire marks 2313-0035 on its body, 4 last digits bring what information?
A. Wire number
B. Wire type
C. Wire size
17. You want to clean a surface by cloth with liquid, you do?
A. Put cloth to the liquid
B. Put the liquid to cloth
C. Whatever above is ok provided efficiency
26. Which ones following are applicable in EPA for ESD prevention?
A. wrist strap, anti-static bags, humid control, anti-static mat
B.wrist strap, ESD jacket, anti-static bags, humid control, anti-static mat
C.wrist strap, ESD jacket, humid control, anti-static mat
29. If you let a current more than 50 miliamps goes through you, you will
30 What is ESD ?
A. sudden flow of electricity between two electrically charged objects caused by contact,
an electrical short, or dielectric breakdown
B. a flow of electricity between two electrically charged objects caused by contact
C. sudden flow of electricity between two electrically charged objects caused by
disconnection.
31 Where could we set up an EPA ?
40. How many splice permitted for damaged repair on the same wire.
A. Only one splice
B. Not more three slices
C. No required
2. A ground fault is
A. an intentional electrical path between a power source and a grounded surface
B. an unintentional electrical path between power sources
C. an unintentional electrical path between a power source and a grounded surface
3. . Fora direct current, the value indicated on the ammeter is:
A. Voltage
B. Resistance
C. Current
4. A voltmeter measures
A. The potential difference between two points
B. The potentialof one point
C. The resistance difference between two points
8. In EWIS Symbol ˷ is :
A. alternating current
B. direct current
C. earth ground
14. The reason for cutting back properly a wire before crimping is to:
A. complies with ARINC specification.
B. keeps as short as possible wire length
C. ensure that area of contact will not be oxidized