Professional Documents
Culture Documents
MACHINE
SUMOBOT
(Individual Category)
MARILY S. TARUSAN
Principal IV
Region III
Schools Division of Zambales
Municipality of Subic
MATAIN ELEMENTARY SCHOOL
Subic
I. Title: SUMOBOT
II. Picture:
III. Description:
1. The robot will follow the lines after calibrating it, then the robot to reach its
destination.
2. It is designed to go trough any obstacles
3. It is powered by 7.2 -volt Li-on battery and can be charged using any Android
charger.
V. Procedure
LINE TRACING
(Team Category)
MARILY S. TARUSAN
Principal IV
Region III
Schools Division of Zambales
Municipality of Subic
MATAIN ELEMENTARY SCHOOL
Subic
II.Picture:
III. Description:
1. The robot will follow the lines after calibrating it, then the robot to reach its
destination.
2. It is designed to go trough any obstacles
3. It is powered by 7.2 -volt Li-on battery and can be charged using any
Android charger.
IV. Materials Used
1. Wheels
2. Chassis
3. Ultrasonic Sensor
4. Guiro Sensor
5. Wires
6. Batteries
7. Charging Port
8. Switch
9. Dynamo
10. Screw
11. Ardruino Uno Board
12. Line Sensor
V. Procedure
Linetracing
(Individual Category)
MARILY S. TARUSAN
Principal IV
Region III
Schools Division of Zambales
Municipality of Subic
MATAIN ELEMENTARY SCHOOL
Subic
II. Picture:
III. Description:
1. The robot will follow the lines after calibrating it, then the robot to reach its
destination.
2. It is designed to go trough any obstacles
3. It is powered by 7.2 -volt Li-on battery and can be charged using any Android
charger.
IV. Materials Used
1. Wheels
2. Chassis
3. Ultrasonic Sensor
4. Guiro Sensor
5. Wires
6. Batteries
7. Charging Port
8. Switch
9. Dynamo
10. Screw
11. Ardruino Uno Board
12. Line Sensor
V. Procedure
SUMOBOT
(Team Category)
MARILY S. TARUSAN
Principal IV
Region III
Schools Division of Zambales
Municipality of Subic
MATAIN ELEMENTARY SCHOOL
Subic
II. Picture:
III. Description:
1. The robot will follow the lines after calibrating it, then the robot to reach
its destination.
2. It is designed to go trough any obstacles
3. It is powered by 7.2 -volt Li-on battery and can be charged using any
Android charger.
IV. Materials Used
1. Wheels
2. Chassis
3. Ultrasonic Sensor
4. Guiro Sensor
5. Wires
6. Batteries
7. Charging Port
8. Switch
9. Dynamo
10. Screw
11. Ardruino Uno Board
12. Line Sensor
V. Procedure
II. Picture:
III. Description:
1.
2.
3.
IV. Materials Used
1.Old PC Monitor
2.Mirroring device
V. Procedure
Letter of Intent
This is to request permission into your good office to allow me to introduce Random Name Generator
to the teachers of Matain Elementary School which is beneficial not only to addressed least learned
skills in Science but also in delivering and presenting concepts and topics in different learning areas.
Respecfully yours;
Letter of Endorsement
School Memorandum
No. 8, s.2016
You are hereby certified to indorse an innovation to the 50 teachers of Matain Elementary
School during the scheduled School-Learning Action Cell (SLAC) Session.
AURORA F. DE LUNA,Ed.D
Principal IV