Professional Documents
Culture Documents
Concretes
Table of Contents
74 Test on grout
75-76 Making concrete in laboratory
77-81 Tests on fresh concrete
77 Plasticity / Workability
81 Entrapped air
82-85 Making test specimens
84 Positioning
86 Taking samples
87 Conservation of test specimens
88-91 Surfacing of test specimens
90 With sulphur
90 Plate test
92 Auto-control
93-100 Mechanical strength
93 Control and piloting test machines
94 STANDARD range machine
95 FOOTMETER range machine
95 UNIVERSAL
95 HPC
96 High-performance footmeter machines
99 Adherence
100 Deformation of structures
101-104 Precast concretes
104 Special tests
105-112 Non destructive tests
105 Search for and monitoring of cracks
107 Search for amourings
108 State of corrosion of armourings
109 Mechanical strength
110 Homogeneity
111 Permeability
111 Permeability / Thermal Conductivity
112 Deformation of structures
L0060/R04 Ø 10 mm
L0060.2S L0060/R05 Ø 11 mm
With lot of 5 inlet nozzles from 8 to 12.5 mm. L0060/R06 Ø 12,5 mm
D0267/15.1
• Opening 2 mm.
L0060.2S
(indicated in the standard EN 445)
V0123T Delivered with a 1 litre ± 1cl measurement recipient,
without sieve
Measurement recipient
Baroïd weighing device
C0166/2*
L0060.5
Agitator with electric
For simple and precise determination
of the density of drilling muds. propeller with stand
With spirit level for better
Perfect work site instrument thanks T0052.1/R99
precision to its robust construction.
Delivered in plastic box.
Accessory
Set of ten CO2 cartridges L0060.8
L0060.6/R05
For measurement of the
rheological properties of fluids.
Elutriometer A synchronous engine makes it
L0060.7 possible to have a wide range
of shearing rates controlled.
For determination by sieving The continuous display of data
of the sand content of drilling muds. on a calibrated scale,
Delivered with funnel, cover, sieve facilitates observation of any
L0060.6
and graduated reception vessel variation according to time.
L0060.7
• 6-speed laboratory model.
• Elect. supply: 220 V - 50 Hz.
• Dim.: 390 x 150 x 270 mm.
• Weight: 6.8 kg.
Delivered complete.
CONCRETES
Zyklos type variable gear concrete mixer Capacity:
30 litres or 50 litres, 150 or 250 litres
Mixing Tank
Ref. capacity volume Power Empty weight
C0199/30 30 l 40 l 1,5 kW 180 kg
C0199/30E 30 l 40 l 1,5 kW 180 kg
C0199/30HE 30 l 38 l 1,5 kW 450 kg
C0199/50 50 l 56 l 1,5 kW 800 kg
C0199/150 150 l 170 l 4 kW 800 kg
C0199/250 250 l 365 l 7,5 kW 1400 kg C0199/150 ou C0199/250
The mixing axles are arranged in an eccentric manner and the tank turns
in the same direction and independently.
This produces a shearing force and a sizeable amount of energy.
The static mixing organs fixed on the arms perform a vertical mixing
of the material and hence a perfect homogeneity.
C0199/COLXM2
C0198/11 C0198/2
Exists in :
• 4 set speeds: 96, 211, 320 and 450 rpm.
• or in 3 set speeds: 96, 211 and 400 rpm.
and one variable speed from 65 to 450 rpm.
B0026/F
Recommended accessory
Scraper arm
B0026/D/3 20 l
B0026/F/1 40 l
CONCRETES
Plasticity / Workability
Vebe consistometer
According to BS 1881 / ISO 1920-2 / EN 12350-3
C0183M
Concrete plasticimeter
Flow table C0144.1
According to ASTM C124 / AASHTO T120 / UNE 7102
For rapid determination of the
plasticity of a concrete.
The obtained values are
approximately the same as
those of the slump cone.
• Dimensions: 370 x 120 x 111 mm.
• Weight: 2 kg.
C0144.1
C0165
C0150.01
Including : D1619
• 1 base plate. Hand scoop
• 1 cone.
• 1 funnel. According to EN 12350-1
• 1 picking rod. D1619
• 1 hand scoop.
• 1 measurement ruler: length 300 mm. • Capacity: 5 kg of concrete.
C0150.01
Galvanised steel slump cone with quick securing and bracket arm
According to EN 12350-2, EN 12382 / ISO 1920-2
C0150.2
Including :
• 1 support plate with 2 handles. • 1 picking rod, length 600 mm - Ø 16 mm.
• 1 normalised cone with 2 handles • 1 funnel.
and 2 securing lugs. • 1 hand scoop.
• 1 system with brochet arm. • Dimensions: 480 x 410 x 340 mm.
• Weight: 13 kg.
C0150.2 With direct readout on the Thanks to its transport handles and its rapid
indicator of the sliding arm securing, this cone and its accessories can be
System with bracket arm carried in a single hand
C0151
Accessories C0151
Delivered with cone and pestle.
Spare cone Spare rammer pestle
C0141
C0151.1 C0151.2
Workability tester
For slump table.
According to ASTM C1362
C0141
CONCRETES
Slump test system Accessories for C0207
According to EN 12350-8
C0207
Plate
Including :
• A galvanised steel cone. C0207/R01
• A galvanised steel base plate,
905 x 905 mm, with two engraved Additional mass
circles Ø 210 mm and 500 mm.
C0207/01
Cone
C0183M/R03
C0207
C0208
Including :
• The L-shaped box composed of :
- a tank.
- 2 bars system (3 vertical bars :
Ø 12 mm, with 41 mm spacing,
or 2 vertical bars with 59 mm
C0208.1
spacing)
- a guillotine door.
• Two identification markings at C0208.2
200 mm and 400 mm are
engraved on the bottom.
• A galvanised steel 300-mm ruler.
C0208.3 Accessory
Including : Ring
• A galvanised steel ring, section: 30 x 25 mmand Ø 300 mm.
The bars fixed in the ring : Ø 10 mm and length 100 mm. C0208.3/R01
The distance between the bars is 48 mm.
• A galvanised steel cone.
• A 800 x 800 mm base plate with two engraved
circles for centering the ring.
C0208.3
C0383 C0167/1
Concrete penetrometer
According to ASTM C403 / AASHTO T197
C0384
C0384
CONCRETES
Entrapped air
5-litre concrete air meter Accessory
According to NF P18-353 / EN 12350-7 / ISO 1920-2
ASTM C231 type A / BS 1881:106 / UNE 7141
Calibration cylinder
C0195M 5l
C0195M.1
C0194/4 Transport box For air meter C0195M
Delivered complete with pump,
manometer, picking rod.
• Dimensions: 350 x 350 x 700 mm.
• Weight: 13 kg.
C0195M
C0195T 8l
Accessory for
C0195T C0195T and C0195TE
C0195TE
Similar to model C0195T, but equipped with
an electric compressor to maintain constant air
pressure.
• Elect. supply: 240 V single-phase 50 Hz.
• Weight: 14 kg.
C0194/4*
C0195TE
Moulds according
to standards
AFNOR - ISO - EN - ASTM...
Techniplast covers
C0119/1.230 set of 10
C0119/1.21 C0119/1.20
Accessories
Unmoul ding oil
C0139.1 10L
T0099/1
C0119/1.1 T0099/1 - C0119/1.1S
Steel • Length : 450 mm.
CONCRETES
Plastic cubic moulds with pneumatic Accessories for mould C0105/1
removal from mould C0105/1/R01 Mould base (set of 100)
R0508 Compressor
• Set of 40.
C0105/6
C0119/1.24
C0105/5
Positioning
C0163.1S
C0163.1S
C0163 C0162/D
C0162/AB needle Ø 25 mm
C0162/AR needle Ø 35 mm
C0162/AB/AR
CONCRETES
Battery supplied poker Accessory for
vibrator Ø 25mm C0162/ACA
Rechargeable batterie
According to NF P18-422
C0162/ACA
C0162/ACA/R01
Completely autonomous equipment
supplied by one (1) 12 V battery.
Used to vibrate 20 to 30 concrete test
specimens Ø 16 cm H 32 cm with
a single battery.
Case including :
• Electric motor: 12 000 vibrations C0162/ACA
per minute.
• Vibrating needle, approx. 1 meter long.
• Two rechargeable 12 V batteries.
• One 220 V / 12 V charger.
• Weight: 2.9 kg.
C0162.1
C0159 C0159/A
• Vibration rate: 3 000 vibrations per minute. • Vibration rate: 3 000 vibrations per minute.
• Elect. supply: 220 V single-phase • Elect. supply: 220 V 50Hz.
or 380 V three-phase. • Delivered with tightening clamp.
• Delivered with tightening clamp. • Dimensions: 80 x 40 x (h) 41 cm.
• Weight: 82 kg.
C0159
C0159/A
CONCRETES
Thermostatic curing tank Accessoires pour bains
C0308 thermostatiques
For approx. 20 test specimens (16 X 32 cm). Plastic cover
• Temperature regulation at 20°C with
immersion control thermostat. C0308/01 et C0309/01
• Power: 2 000 W . For conservation box.
• Elect. supply: 220V single-phase.
• Tank dimensions: 940 x 650 x 500 mm. Heating resistance
• Weight: 60 kg. C0305/R01.1
Humidifier Atomised
water
C0188.1
particles
Air humidifier for test specimen
conservation chamber. Used to obtain a
95% relative humidity (RH) rate by water
atomisation in particles of Ø 1 µ.
• Yield: 0.8 kg/hour.
• Air flow rate: 200 m3/hour. C0305/R02.2
• Max. water pressure: 1.5 bars. C0188.1
• Elect. supply: 220 V single-phase 50 Hz. Test specimen lifting
• Dimensions: H 300 mm - Ø 420 mm. system
• Weight: 3.8 kg.
C0121/9
Standard model ➀
C0350
• Power: 2 200 W.
• Blades: 350 mm or 450 mm.
• Dimensions: 1 390 x 700 x 1 200 mm.
• Net weight: 130 kg.
Large model
C0350/600
➁
• Power: 3 300 W.
• Blade 500 mm. ➂
• Dimensions: 1 400 x 700 x 1 400 mm. ➃
• Weight: 150 kg.
Meets all CE safety directives
Common accessories such as :
➀ Blade protection shield.
for concrete saws ➁ Knee-level emergency
Diamond blade stop button.
➂ Pedal for driving in the blade.
C0350/2 Ø 450 mm
➃ Wheeled trolley for displacing
C0350/3 Ø 350 mm the materials.
C0352 C0353
Portable saw
C0351
C0351
CONCRETES
Appliance for rectifying concrete test pieces
C0202/SA
This compact machine enables a standard cylindrical
or cubic test specimen to be corrected.
Control box
Accessory
Diamond disk
C0202/R01
C0202/R01
With sulphur
Surfacing cylindrical concrete test specimens Surfacing products Flower of sulphur
5-litre heating box C0121/1.1 25-kg bag
Sulphur mortar
A type for normal concrete.
5-litre heating box For standard concrete.
Useful capacity of 2.5 l. C0121/1A 10-kg bag
For surfacing cylindrical specimens
of concrete and any other type
B type for R.C.H.
of specimens.
In conformity with safety standards. C0121/1.20 20-kg can
Plate test
Set of elastomer plates Capping retainers for rapid surfacing
CERIB-CEMP patent According to ASTM C1231
C0100/1 C0107.1
C0107.1/R01 60 shore
C0107.1
C0100/1
C0107.1/R01
Warning the distance between platens
must be greater than 340 mm.
Ø 16 x 32 cm.
Lifting device
C0121/9
C0121/3 C0121/9
For test specimen Ø 16 cm x 32 cm.
CONCRETES
Mobile filtration hood
Accessory
D3601
D3601
C0125/1
Classe 2 or A
Ref. Cap kN Ø x Ø H mm
E0101.143 50 82 x 59
E0101.146 300 135 x 200
E0101.148 1 000 135 x 200
E0101.149 2 000 135 x 200
E0101.150 3 000 135 x 200
Calibration case
According to EN 12390-4 / ASTM E4
E0101/2012
E0101/2012/L
E0101/2012
for processing your Connecting all on request
calibration results.
Measurement cell
Capacity 3 000 kN.
Equipped with 4 gauge bridges to measure
deformation on the 4 generators.
A fifth gauge is used to calibrate the machine.
Positioning assembly
E0101/F To ensure correct positioning of the cell.
CONCRETES
Control and piloting test machines
C0008/R02
Opportunity to :
• Follow up to 3 machines (optional).
• Ratemeter.
• Connecting to a PC (Ethernet).
• Display units
(kN, kg, lb, t, MPa, N/mm2, psi, b/ln2 ...).
• Display of the curve load / time.
• Storage on USB key.
• Separate calibration.
• 8 analog inputs.
• 1 Ethernet output 100Mbit.
• 2 USB outputs.
• 1 SD Card slot.
• Power supply: 230 V single phase 50Hz.
• Power requirement: 70 W.
• Dimensions: 245 x 55 x 260 mm.
• Weight: 5 kg.
Regulation
valve
C0049S C0070N
CONCRETES
FOOTMETER range machine
Capacity 2 000 kN - 3 000 kN
Footmeter compression machine
According to EN 12390-4 / NF P18-411 / BS 1881:115
DIN 51220, 51302 / UNE 83304 / ASTM C39 / AASHTO T22
UNIVERSAL
Capacity 3 000 kN
Footmeter compression machine
For test specimens: 16 x 32 and 25 x 25 block.
• Chrome-plated columns.
• Space between plates for blocks: 290 mm.
• Space between cylindrical plates: 336 mm.
• Compression plates for 16 x 32, Ø 287 mm x 60 mm.
• Compensation ships on request.
• Elect. supply: 230 V single-phase 50 Hz.
• Power: 750 W. C0086FN
HPC
Capacity 3 000 kN - 5 000 kN
Footmeter compression machine
According to EN 12390-4 / NF P18-411 / BS 1881:115
DIN 51220, 51223, 51302
This rigid four-column load frame with single acting ram, lower
fixed platen and upper spherically seated platen with oil filled
ball seat. The columns are chromium plated and the piston is
hardened and micro finished. The machine is precision aligned
and cylinder test conform.
CONCRETES
Device for splitting test Splitting test system
According to EN 12390-6 / ASTM C496 According to EN 12390-6 / ASTM C496
NF P18-408 / BS 1881: 117
C0100/10
C0100
• Weight: 17 kg.
Used to perform splitting tests on test • For test specimens: 100 x 200 to 160 x 320 mm.
specimens. The system is positioned
between the plates of any compression
C0100/11
test press with a space of 340 mm.
• Dimensions: 180 x 360 x 320 mm. • For paving stones.
• Weight: 48 kg.
C0100
C0100/10 C0100/11
Accessories:
Loading strips ( set of 100) Auto-centering device
According to EN 12390-5 / NF P18-407 / UNE 83305
Ref. Dimensions cm Characteristics Standards
ASTM C78,C293 / AASHTO T97 / BS 1881:118
C0090/E3 370 x 15 x 3 plywood EN 13286-42
C0090/E7 270 x 10 x 3 plywood EN 13286-42 C0107/01
C0090/E9 116 x 3,6 x 3 plywood EN 13286-42
For 150 x 150 or 100 x 100 mm specimens.
C0090/E10 370 x 10 x 3 hardboard EN 12390-6 Platen Ø 287 mm.
C0090/E11 270 x 180 x 3 plywood EN 13286-42
C0106
C0107/01
For prism: 15 x 15 x 56.
Lateral displacement knife. Articulated upper
and lower knives. Possibility of making flexion
C0106
in 3 points. To be inserted in the test space of a
compression machine fitted with an adequate
calibration scale (between 0, 100 or 200 kN
maximum).
• Weight: 27 kg.
C0130E
Including :
• Clump with three LVDT sensors for acquisition
of displacement.
• Pressure sensor to be inserted in the hydraulic circuit.
• Conditioner with four inputs.
• Acquisition card with software.
C0230.1
Module en compression
Universal extensometer
According to ASTM C469 / ISO 6784 / BS 1881:121 / DIN 1048:1
C0134
C0134
CONCRETES
Adherence
Pull off dynamometer
According to XP P18-853 / EN 12808-1
Deformation of structures
Pull out test appartus
According to EN 12504-3 / ASTM C900 / BS 1881
C0376
The extraction of an insert in hardened concrete is
used to evaluate its mechanical resistance strength.
The apparatus is composed of the following
elements:
• 1 hydraulic cylinder.
• 1 pump with manometer, 60 kN.
• 1 set of inserts to be positioned at concrete pouring.
• Support ring.
• Dimensions : 740 x 300 x 255 mm.
• Weight: 18 kg.
Accessories
Set of 25 inserts
C0376/1
C0376
C0129
CONCRETES
Compression machine for tests on concrete blocks,
capacity 2 000 kN or 3 000 kN
According to EN 772-1 / ASTM C39,E447 /AASHTO T22
NF P18-411 / BS 1610,6073 / UNE 83304
C0085/5SN
General characteristics:
• High rigidity 4-column frame.
• Compression plate: 510 x 310 mm.
• Distance between fixed plates : 335 mm or adjustable option.
• Elect. supply: 230 V single-phase 750 W.
C0085/5SN
C0090/3
C0091/3
SDB3600/A
CONCRETES
Accessory for road kerbs
According to EN 1340
C0091/13
This apparatus is composed of a steel baffle
plate mounted n an articulated base.
It is used to apply a flexion force in 3 points
without torsional stress.
It is fixed on the upper part of flexion machine
type C0091/2 or C0091/3
C0091/13
C0100/12
Special tests
Very universal bending testing machines with bending table with 6 meter support
length for testing of large concrete, timber and other specimens.
Two swivelling supports with continuously adjustable facility.
The machine can also be used for compression and tensile tests.
The machine has a rigid c-shape construction and a double
acting actuator with anti-rotation system to prevent
the natural tendency to rotate.
These large testing machines are specially designed for crushing tests on sewer and
drain pipes, concrete pipes, fittings, cones and others up to 2000 mm in diameter
and 2500 mm length. Rectangular shaped top bearer is detachable from the
actuator. The system does not permit rotation but is swivels in longitudinal direction.
Bottom bearer is V-shaped with an included angle of 150°.
CONCRETES
Search for and monitoring of cracks
Temperature Displacement
C0363
General characteristics :
• Tight displacement sensor IP65.
• Displacement measurement scope ± 5 mm
(and higher upon request).
• Measurement precision : ± 0.01 mm.
• Sensor measurement range : - 30 °C + 65 °C ± 0.4 °C.
• Max. number of stored measurements: 8 100 (16 200 on request).
• Duration of acquisition: 1 hour to 365 days.
• Period of acquisition: 0.5 second to 1 hour.
• Data transfer by RS232 C with memorisation of curves and values.
• Display of the date and time of max. and min.
crack openings during the operation.
• Apparatus autonomy: greater than 1 year.
• Weight: 300 g.
• Delivered with software and accessories, without PC.
Accessories
Set of 50 discs Tube of adhesive
C0362/1 C0362/2
C0361
MT4703030
MT4703033
MT 4703031 MT4703035
Type G3 Type G6
MT4703032 MT4703034
Used to measure the evolution of movements Used to measure a complex deformation in a same plan.
of a plane Z perpendicular or parallel to a reference Association of 2 verniers, one measuring translation and the other
plan xy. Readout at 0.2 mm according measuring rotation, to evaluate the evolution of a crack.
to the micrometer principle. Principle of 1/10 mm vernier.
Field of measurement: 30 mm. Self-adhesive fixation.
CONCRETES
Search for amourings
Reinforcement detector
Rebar type
E0489L
Thanks to a directional sensor, the presence and position of
reinforcements in the concrete may be determined.
• A more or less sharp sound depending on how near
the position of the reinforcement is (parallel or
perpendicular to the sensor) up to 110 mm cover.
• Dimensions: 183 x 110 x 78 mm.
• Weight: 1 kg.
CONCRETES
Mechanical strength
Sclerometer
According to EN 12504-2, EN 12398 / ASTM C805 / BS 1881:202
NF P18-417 / DIN 1048 / UNE 83307
For the non destructive inspection of hardened concrete, verification
of the homogeneity of a structure and estimate of the resistance.
Standard Model N
C0380
For examination of ordinary concretes.
Resistance included between 10 and 70 MPa.
• Dimensions: 330 x 80 x 80 mm.
• Weight: 1.5 kg.
"Original Schmidt" sclerometer C0380
Model N
C0381
For intensive use.
C0380/1
C0381/E2
Homogeneity
Accessories common to
Portable Appliance ultrasound equipment
According to EN 12504 / ASTM C597 / BS 1881:203
NF P18-418 / UNE 83308
E0632 Contact paste
Without oscilloscope. E0641/3
• 2 probes with cables.
• 2 outputs for oscilloscope without cable.
• Weight: 900 g.
E0632
Ultrasound appliance
According to EN 12504-4 / ASTM C 597-02
BS 1881:203 / ISO1920-7:2004
E0746
For non-destructive control of materials.
Unit with digital display of the measurements
(wavelength propagation time, speed).
Measurement range :
• Speed: from 1 to 9999 m/s to ± 1 m/s. E0746
• Propagation time: 0.1 to 9999 Ns to ± 0.1 Ns.
• Three excitation energies: 125 v, 250 v, 500 v and auto.
• Bandwidth 20 to 500 KHz. The equipment includes :
• No selectable gain: 1x, 10x, 100x, auto. The unit with outlets for oscilloscope and RS 232C,
• Batteries: 4 xAA or rechargeable. batteries, bag, 2 54 Khz transducers, 2 1.5 m cables, 25Ns
• USB power plug (no mains plug). metering rod, a battery charger with USB cable, 4 AA (LR )
• Nominal power: 3.6 to 6 Volts. batteries, data medium with software, carrying case and
• Operating temperature: -10°C to 60°C. contact product.
• Dimensions: 172 x 55 x 220 mm. Sensors ranging from 24 kHz to 500 KHz and exponential
• Weight: 1.316 kg. sensors may be connected.
CONCRETES
Permeability
Cembureau permeability tester
According to EN 12504 / ASTM C597 / BS 1881:203
NF P18-418 / UNE 83308
E0651
Used to measure the air or gas permeability
of elements made of concrete or other porous
materials, through a concrete disc.
The apparatus includes :
• A pressure cell capable of accepting test
specimens of Ø 150 mm and H 50 mm.
• A control console with manometer graduated from 0
to 6 bars and 4 capillary columns (1,5 - 5 - 15 and 150 ml)
to measure the gas flow rate through the material.
• Dimensions : L 1180 mm - H 780 mm.
• Weight: 21 kg.
Option
Cembureau permeability tester Cembureau
E0656 model with 2 cells
With water for concrete mortar. E0651/2
E0651
Indispensable accessory
Gas cylinder and pressure reducer
Caracteristics :
• 3 measurement cells.
• Test pressure: max. 10 bars.
• Dimensions: 420 x 1 270 x 1 660 mm.
• Weight: 110 kg. E0658
Deformation of structures
Deflection recorder
C0407
Precise determination of the measurement of the deflection on bridges,
beams and other suspended structures by means of an Invar wire.
The apparatus is composed of :
• Drum recorder, height: 100 mm, graduated from 0 to 20 with rotation
of 1 turn per 24 hours, 7 days or 31 days.
• Amplification 5 and 10.
• Elect. supply: 5 V alkaline battery.
• Weight: 2 kg.
Delivered without Invar wire.
Accessory
Invar wire
C0407 C0407/R01
100 m roll, Ø 0.5 mm
(15 kg resistance).
Version 1
C0405/1
Composed of a large dial gauge, 25 mm stroke,
with articulated support for securing the Invar wire.
Delivered with transport carrying case and 20 m
of Invar wire.
Version 2
C0407/1
Idem above, including in addition:
• 3 sets of dial gauges 25 mm / 0.01 with accessories.
Accessory
Invar wire
C0407/2
20 m roll of Invar wire. C0407/1 C0405/1