Professional Documents
Culture Documents
INSTALLATION MANUAL
Applied Machines: / /
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
KH-102 UK-211
Machine
HD-522* FK-513
KP-101
AU-201S WT-506
MK-735
PK-519 PK-520
*: Varies depending on the applicable marketing area
When installing the main body and associated options as a system, follow the order shown on the upper.
Caution:
• Lifting the main body in an awkward position or transporting it in a poorly balanced position could result in
personal injury. When transporting the main body, assign an adequate number of persons to the job and
ensure that each person can take a good position of not being excessively loaded.
(mass: approx. 56.5 kg (124-9/16 lb))
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly.
• When placing the main body on the floor, make sure to use the paper feed cabinet or the desk to secure
the performance and the quality of the product.
• To use this machine, install the reverse automatic document feeder or the original cover.
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
A7AH-9601-00
E-1
5. Accessory parts
No. Name Q’ty
1. User’s guide holder 1
2. Quick start guide 1
3. Installation manual 1 set
1191 4. User’s guide CD 1
(46-7/8)
430 660 101 5. CD-ROM 1 set
(16-15/16) (26) (4)
6. Paper size label 1
7. Panel sheet 1 set
(20-13/16)
528
8. Blind label 1
9. Power cord * 1
(61-7/16)
E-2
E-3
E-4
E-5
E-6
E-7
LED1
Networkport
E-8
Note:
After completing all the steps, take a sample
copy, and confirm the image. If image troubles
occur, first turn OFF and ON the Main Power
Switch, and then redo the steps from E-7 “13.
Date & Time Setting/Time Zone Setting (Service
Mode)” to E-7 “15. Unit change.”
E-9
E-10
2. Original mat
3. Hinge cover
(right)
1
4. Hinge cover (2) Attach the supplied hinge cover (right) and hinge
(left) cover (left).
1 (Two screws supplied with the original cover)
5. Screw
2
E-11
イラスト作成中
・本体形状変更
イラスト作成中
・本体形状変更
Spacer
イラスト作成中
・両面テープ変更
・本体形状変更
E-12