Professional Documents
Culture Documents
Riggers
Haulers
Single load only Multiple items along with the primary load
**It is preferable to avoid assembly of multiple loads during a lifting. A competent person like the Team Leader/Supervisor should assemble loads if
separate lifting is not feasible. Lifting activity must have atleast 02 technicians/riggers plus one Supervisor and for loads above 40Kgs there must be
atleast 02 hauler
/rigger, to support lifting and monitoring activities . The center of gravity considered during the load tie-off and slinging phase.
# only low stretch kernmantle ropes must be used for lifting
1 of 2
Sketch/Layout of the Site
Lifting preparations
▪ Drop /Exclusion zone marked: Mtrs (at least 1/7th of lifting height)
▪ Expected duration of the lifting activity (in Hours) From: Hrs. to Hrs.
▪ No. attachment points for the load to maintain stability & center of gravity 01 02 03
▪ Communication methodology between team Verbal Hand signal Combination
▪ Is there a secure anchorage point Yes No,
▪ Appropriate PPE & Rope, Pulley (one extra harness for rescue, if required)
Hard hat
Full body harness & lanyards Gloves & Shoes Kernmantle rope & Pulley
Emergency Preparedness
I certify that the entire lifting job will be done according to standard procedures.
Team leader/Supervisor signature: Date
Lifting Plan 2 of 2