You are on page 1of 4

EE Engineering Construction Services

An ISO 9001:2000 Certified Company

Kind Attn : Aashvi Vijetha LLP, Hyderabad

Dear Sir,

SUB: SUBMISSION OF QUOTATION FOR GUNITING AND SOIL NAILING WORKS.

Thank you for inviting us to quote for the job. Our quote is based on the information
provided to us.

We are pleased to quote as per enclosed BOQ. Our quoted unit rates are EXCLUDING ALL APPLICABLE
TAXES.
Our Lump sum quote is subjected to following terms and conditions.

TERMS & CONDITIONS: -

i . Client / Main contractor to provide the following to us at no cost

ii. Storage facility for our equipment and accessories.

iii. Provide the necessary dry and solid platform, wherever necessary, for the operators to stand and operate
the equipment and continuous dewatering, if required.

iv. Provide sufficient lighting for night works

v. Detection & diversion of services if any.

vi. All required electrical and water.

vii. Shifting of the equipment, if required.

viii. All excavation and survey works.

ix. Removal and shifting the excavated soil/Loose material in the site as per the requirements.

x. Accommodation for our working labors and supervisors up to completion of site work.

xi. No Objection from neighbors &beside building owners


EE Engineering Construction Services
An ISO 9001:2000 Certified Company

BILL OF QUANTITIES:-

Approx
Unit Rate Amount
S.NO DESRIPTION Quantity

Mobilization of the personnel &


equipment to and from the
site (Nonrefundable Fee)
1
LS LS LS 20,000

2 Provision of Weep Holes/ Drain Holes Hole 30 850 25,500/-


to reduce the poor water pressure caused
due to seepage at the site

3 Scaffolding for nailing & Shotcreting Client Scope

Providing & Execution of Shotcreting


work by supplying and fixing
4 geogrid/Weld Mesh And spraying 40
to 50mm thick concrete/mortar
SQM 100(Approx) 1800/- 1,80,000/-
conveyed through a hose and
pneumatically projected at high
velocity on to the surface including
providing manpower, shotcreting
equipment with diesel complete, as
directed by Engineer-in-charge.

Nails (20 mm) of 1.5 metre length also


will be provided along with
shotcreting for the proposed area with
spacing of 1.5 m (horizontally
& vertically)

Final Bill will be raised as per Area obtained in the Site


EE Engineering Construction Services
An ISO 9001:2000 Certified Company

If our machinery and personnel are stand by due to non-availability of work front or any
other reason, stand by charges of Rs. 20,000 per day to be paid to us. Payment shall be based on
actual quantity installed at site.

PAYMENT TERMS :-

a. 40% of the contract sum as mobilization advance to be paid along with confirmation.
b. Payment for the work done shall be made within TWO (2) days from the date of claim.
c. The unit rate quoted does not include any state or central taxes applicable.

This quotation is valid for the above project and for 10 days from the date of this
quote. Mobilization of the equipment, manpower and machinery will be done within 3
days from your confirmed order and receipt of advance amount.

You need any clarifications, please contact the undersigned on mobile 9000800622. We
hope the above is in order and look forward to be of service to you.

Thanking You,

Yours Truly
EE Engineering Construction Services
An ISO 9001:2000 Certified Company

APPENDIX A: RESPONSIBILITY MATRIX

ITEMS DESCRIPTION OF WORK SCOPE BY

Providing required Site personnel, Technicians


for
1 EEECS
Gunniting Works
2 Excavation/Remove the loose soil , if any CLIENT

Supply of Cement, Sand, Bending wire


3 EEECS

Providing 3 phase electricity for Grouting and


4 other works, if required CLIENT

Covered space for storing the materials and


5 Equipment’s CLIENT

Supply of Geogrid/ Weld Mesh


6 EEECS

Accommodation (room and


drinking water, etc.)for
7 all work men CLIENT

8 Scaffolding for the proposed CLIENT


work
(Rate Provided)

You might also like