Professional Documents
Culture Documents
Major bridge on Narmada Main canal ,Saurashtra Branch canal and other Branch canal).
SCHEDULE – B
QUANTITY STATEMENT
Estimated rate Total Amount
Quantities
according to
It. No. estimated out Item of Work Unit
estimated
or less In Figure In words quantities
1 2 3 4 5 6 7
1 5.00 Clearing and grubbing road land including uprooting rank Hectre
vegetation grass bushes,shrubs,sapling and trees girth up to
300 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials (C) By mechanical means in area of
light jungle
2 1.00 Marking out centre line of the bridge and various other Lump
component structure and complete lining out and levelling sum
with theodolites, levels including pillers for lines and levels
and establishing necessary bench marks etc complete as
directed.
3 364.00 Providing flood gauge marks on foundation/substructure as Sq.mt
per design including painting as per specifications and as may
be directed etc. complete.
4 906.00 Providing and laying - Fitter Media 600mm thick directed at Sq.mt
the back of abutments, returns and wing walls as per detailed
specifications. (more than 10 ton)
5 838.00 Providing and filling sand behind abutments and between Cu.mt
returns in layers as directed
6 130.00 Construction of Pontoon with all necessary arrangement to tonne
facilitate Piling, Girder erection and for supporting all other
construction activity which can be dismantelled after
completion of scope of work
7 2398.00 Excavation for foundation in sand, gravel, clay soft soils and
murrum etc. including shoring, strutting dewatering as
Cum
necessary and disposing of the excavated stuff as directed.
8 40.00 Excavation for foundation in sand, gravel, clay soft soils and Cum
murrum etc. including shoring, strutting dewatering as
necessary and disposing of the excavated stuff as directed.
15 1072.00 Providing and laying controlled cement concrete M.35 and Cum
curing complete excluding the cost of formwork and
reinforcement for reinforced concrete work in (A)
Foundations, footings, Base of columns and Mass concrete
(more than 10 ton)
Estimated rate Total Amount
Quantities
according to
It. No. estimated out Item of Work Unit
estimated
or less In Figure In words quantities
1 2 3 4 5 6 7
16 102629.00 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work Kg
including bending, binding and placing in position complete
upto floor two level (more than 10 ton)
25 1501.00 Providing & laying weep hole in Abutments, and returns by Nos
using A.C. pipe of 100mm including laying in proper grede and
jointing the completed as per detailed specification.
26 113.10 Providing and applying the elastomeric joint sealant two Rmt
component, high performance polysulfide formulation
conforming to BS:4254 and ASTM C 920 having weathering
resistance to ultra-violet rays and shall exhibit shore A
hardness of 25 and have movement accommodation factor
25% including using of compatible primer of approved
standard etc. complete. for 12 mm thick joint
59 58324.00 Providing and applying evenly Tack coat with bitumin Sq.mt
Emulsion (RS1) on prepared surface of granular base including
cleaning of road surface and spraying primer at the rate of
2.50kg/10Smt using mechanical means
60 8514.00 Providing panel wall for dry stone pitching in uncourased Cu.mt
rubble masonary with had stone of approved quality in
cement. mortar 1.5 including curing etc, complete. (more than
10 ton)
61 315904.00 Earthwork for embankment including breaking clods, dressing Cu.mt
with all lead and lift (excluding watering and consolidation)(C)
From Borrow area within 1.0 Km.lead (more than 10 ton)
62 12174.00 Excavation for foundation in sand, gravel, clay soft soils and Cu.mt
murrum etc. including shoring, strutting dewatering as
necessary and disposing of the excavated stuff as directed.
63 769.00 Plain/Reinforced Cement Concrete of M-15 in Open Cu.mt
Foundation complete as per Drawing and Technical
Specifications.
64 6619.00 Providing and casting in situ controlled cement concrete Cu.mt
concrete M-30 for retaining wall & Box Culvert including
formwork curing and finishing complete. (more than 10
65 437.00 Providing and fixing in position H.Y.S.D. bar reinforement for tonne
retaining wall including cutting, bending and tying complete as
per detailed drawings. (A) R.C.C. Kerb. (B) R.C.C. Footpath.(C)
R.C.C. Approch slab.(D) Wearing Coat. (more than 10 ton)
66 13202.00 Providing and laying - Fitter Media 600mm thick directed at Sq.mt
the back of abutments, returns and wing walls as per detailed
specifications. (more than 10 ton)
67 8718.00 Providing & laying weep hole in Abutments, and returns by NOS
using A.C. pipe of 100mm including laying in proper grede and
jointing the completed as per detailed specification.
68 8.00 Cautionary Warning Sign :-Providing and fixing sign boards Nos
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 90 x 90 x 90 cms. equilateral triangle as
Estimated rate Total Amount
Quantities
according to
It. No. estimated out Item of Work Unit
estimated
or less In Figure In words quantities
1 2 3 4 5 6 7
69 14.00 Facility Informatory Sign :-Providing and fixing sign boards Nos
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 80 x 60 cms rectangular as per design
of IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats
of best quality epoxy paint ;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of Type-11 as per ASTM D-4956
and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75
x 75 x 6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy coatings in black and white
bends. The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site shall be
in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
70 8.00 Hazard Marker Sign :-Providing and fixing sign boards made Nos
out of 1.5mm aluminium sheet / 3mm ACP (Aluminum
composite Panel); size 90x30 cms. rectangular as per design of
IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats
of best quality epoxy paint ;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of Type-11 as per ASTM D-4956
and latest M.O.S.T.Specifications; 1.8mtr long stand post of
75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm;
painted with bestquality epoxy coatings in black and white
bends. The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site shall be
in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from original manufacturer & a
71 2430.00 Providing and erecting a double "W" metal beam crash barrier R.mt
comprising of 3 mm thick corrugated sheet metal beam rail,
70 cm above road/ground level, fixed on ISMC series channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre,
1.8 m high, 1.1 m below ground/road level, all steel parts and
fitments to be galvanised by hot dip process, all fittings to
conform to IS:1367 and IS:1364, metal beam rail to be fixed
on the vertical post with a spacer of channel section 150 x 75
x 5 mm, 330 mm long complete as per clause 810
72 945.00 Supplying and Fixing Cat Eye (Stimsonite) made out from Nos
Acrylo butyle Styrene high compression injection moulding
with reflactor made of MMC (Prismatic type of size 12cm X
6cm X 2.5cm) provided with bituminous adhesive 10g. With
each unit fixing
73 1995.00 Road Marking Audiblo raised vibratory pavement making with SQ.mt
Reflectorising Glass bends on Bituminous surface. Providing
and laying of hot applied thermoplastic compound 2.5mm
thick including reflectorising glass beads @ 250 gms per sqm
area. Thickness of 2.5mm i exclusive of surface applied glass
beads as per IRC:35. The finished surface to be level. Uniform
and free from streaks and holes.
Estimated rate Total Amount
Quantities
according to
It. No. estimated out Item of Work Unit
estimated
or less In Figure In words quantities
1 2 3 4 5 6 7
74 11568.00 Supplying and laying of Extruded Biaxial Polypropylene sqm
Geogrid for base/sub-base reinforcement of having minimum
tensile strength 30kN/m in the longitudinal and transverse
direction and confirming to MORTH specifications 703, laid in
layers below approach slab, above or in WMM layer of flexible
pavement, etc. with all necessary tools to complete the work
as per drawing.
75 554.00 Providing and casting in situ or precast controlled Cement Cum
Concrete M-350 for prestressed concrete work in Super
structure including centering, shuttering, curing, scaffolding,
ramming, vibrating, finishing, lauching or shifting complete.(I)
Solid Slab. (II) Deck Slab. (III) Main Girders.(IV) Diaphragm
or cross girder. (more than 10 ton)
76 84480.00 Providing and fixing in position fully moulded restrained Cu.cm
elastometric Bearings as per detailed drawings.
In Word
(A)
Ten
der
ed
Am
oun
t
Rs.
Signature of Contractor
Deputy Executive Engineer Executive Engineer
( R & B ) Sub Div. ( R & B ) Division
Kadi Mehsana