Professional Documents
Culture Documents
JSA Erection of Gathering Tent
JSA Erection of Gathering Tent
Page 1 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
1.0 Transportation of 1.1 Narrow road/ collision or topple Person/Equipment L Ensure valid vehicle driving Supervisor
material to site license
Observe proper traffic control
and speed limit
Equipment or material should
be properly
secure
L Warning signs shall be erected Supervisor
1.2 Insecure instrument on vehicle Person/Equipment
as means of warning where
applicable.
2.0 Loading and unloading of 2.1 Improper manual handling method Person (slip/trip) L Toolbox briefing Supervisor
Page 2 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
material Proper manual handling method. Permit
Close supervision by Work Supervisor. Reciever
Maintain good housekeeping
Work related PPE to be worn.
2.2 Falling load Person M Toolbox briefing – drop object and lifting
(falling from height/ use tagline during lifting
falling object) Supervisor
provide signalman
Provide signages Permit
Only competent operator are allowed to Reciever
operate
the crane
Crane functional test to be done before Supervisor
commencing the work
Will isolate the working area to ensure
public
safety
2.3 Pinch Point / sharp edges Person Using Proper PPE
L
(hand glove/ long sleeve jacket) Proper
handling method
3.0 Preparing the foundation 3.1 Pinch Point / sharp edges Person Toolbox briefing – Pinch point.
M Supervisor
and material at respective Using Proper PPE (hand glove/ long sleeve
Page 3 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
installation point jacket)
Page 4 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
5.0 Installation of gathering 5.1 Falling load Person Toolbox briefing – drop object and lifting
Tent M Supervisor
use tagline during lifting
provide signalman
Provide signages
Only competent operator are allowed to
operate
the crane Crane functional test to be done
before
commencing the work
all lifting gear will be inspected before use
Will isolate the working area to ensure public
safety
Work related PPE to be worn.
5.2 Pinch Point / sharp edges Person Supervisor
Page 5 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
M
Posting Warning Signage
Toolbox briefing – Pinch point.
Using Proper PPE (hand glove/ long sleeve
jacket)
5.3 Manual Handling. Person
Supervisor
M
Toolbox briefing
Proper manual handling method.
Close supervision by Work Supervisor.
5.4 Working at height Person M Maintain good housekeeping
Work related PPE to be worn.
wear full body harness
Close supervision by supervisor
Provide suitable working platform
Page 6 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
flash burn Only individuals trained shall performed the
fire welding grinding and cutting task.
Hand and Burn Injuries Use the appropriate shade filter for the materials
Fumes and gases to be welded. Inspect all welding hoods/lenses for
Poor illumination. scratches, chips, or other damage Supervisor
Bursting of grinding wheels
Welding machine and its components (cable,
Mechanical Failure electrode, handle, etc) should be inspected daily
Skin/ Eye Irritation before operation.
Gas Cylinder Handling and Wear a properly fitted N-95 particulate mask
Storage g. designed for welding applications
Fire Prevention Fire extinguishers to be positioned in the immediate
location where hot work is being carried out
Provide proper sign boards such as (DANGER
WELDING/ CUTTING WORKS IN OPRATION)
Cable must be kept neat and free from anything that
cause stress and damage.
fire blanket shall be used to control welding sparks
welding flash and protect workers from burns and
exposure to UV-rays
Always try to use burning equipment in well-
ventilated area Use fume extraction system where
required.
Temporary cables to be secured through
nonconductive material,
Equipment check will perform continuously
Workers must use clear safety glasses during dark.
Additional lights will be provided when required
Page 7 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
Must ensure that no loose material come in
contact
No one should be in front of rotating parts.
Ensure that equipment is balanced on ground and
Person working on machine shall ensure that the
proper balance is maintained on both sides.
Workers doing the job should be trained in
operating the specified equipment.
Equipment shall be attended at all the times .If not
working with equipment it should be powered off.
Inspect tool for damage and check that tool
operates properly (DO NOT operate the tool if
parts are damaged or does not operate properly)
Safety glasses or goggles shall always be worn
under a face shield and welding helmet.
6.0 Bolt tightening and 6.1 Working at height (Bad weather) Toolbox briefing – Working at height
Person Supervisor
alignment work Inspect safety harness before use
M
Ensure workers are using correct tools
Tight supervision from supervisor
Use skylift to tighten the bolt
Provide safe working platform
Stop the work
Outrigger fully extend
Page 8 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
Training of personnel
Page 9 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
7.0 Housekeeping 7.1 Manual handling Person M Toolbox briefing Supervisor
Proper manual handling method.
Close supervision by Work Supervisor.
Maintain good housekeeping
Work related PPE to be worn.
Page 10 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
BASIC JOB STEP POTENTIAL HAZARDS Who or What might Risk CONTROLS Action
be harmed Rating Party
(Person/Equip/ Env)
GENERAL NOTES
Basic PPE (Safety Helmet @ Hard Hat, Safety Shoes, Safety Glass and Long Sleeve Jacket) shall be worn at all the time.
Set up barricades around work area and display warning signs.
All equipment / machinery to be inspected by CTCI before any work commences.
All PTW and supporting permits must be valid before any works begins.
On hearing of emergency siren, stop all works, machinery & source of ignition and walk on foot to the nearest muster point.
Vehicle to exit immediately to designated parking area after delivery of material.
No eating and resting on site. Use designated eating and resting area.
All pressure gauges used must be calibrated and tagged with valid calibration sticker.
All scaffolding must have a green "safe to use" tag before put into service.
Maintain good housekeeping daily at all the work places.
Page 11 of 12
Temporary Construction Facility TCF1
Contract No: 6600041387
Tool box talk specific on work instruction and briefing on hazards and control measures to be conducted before start of work.
Page 12 of 12